Document QkwN3QbOkvKvmpw5E0NZ5dvb8

Q Q. CQ U PON RODUCTS OOK JANUARY 1965 f i j .< ! 'It ' ' a: % * \ JACKSON LABORATORY LI 3 HARY draft) Re g . u . s . pat . o f p - E. I. DU PONT DE NEMOURS & COMPANY WILMINGTON 98, DELAWARE BETTER THINGS FOR BETTER LIVING . . . THROUGH CHEA1/STRY Published by: Secretary's Department Product information Section S. A. Shelley, Editor /?. F. Darling, Assoc. Editor J. Heimbach, Assoc. Editor Mk Bair DUP210011140 INTRODUCTION This book contains information on the products manufactured and sold by E. 1. DU PONT DE NEMOURS AND COMPANY (INC.) and its major subsidiaries. It is a convenient source of information on the properties, uses, and other data for Du Pont products, where it was found practical to include such material. For more detailed information, con tact the general or sales offices of the department, division or subsidiary which markets the product. The addresses and telephone numbers of the manufacturing departments' offices may be found in the De partmental (Blue) Section. IF YOU ARE NOT SURE of the department, you may call one of the Product Information Centers, listed on pages IV and 187. The book is divided into four sections, as follows: PRODUCTS SECTION (WHITE PAGES) Products are listed ALPHABETICALLY. Those followed by the symbol are registered trademarks of the Du Pont Company. Unregistered trademarks are indicated by TM. Certain of our products are listed by classification headings, such as Acids, Dyes, Explosives, Petroleum Chemicals and Plastics, to name several. All classification headings are reverse printed, bold face (Example: fe.'lMtiKIl All products which fall into classification headings are also cross-referenced in their general alphabetical order together with the page number on which the product description appears. See "How To Use" information which appears on page VI. TRADEMARK SECTION (YELLOW PAGES) A major portion of Du Pont trademarks is listed alphabetically, The generic name and name of the department which markets the product follows the trademark. INDUSTRIES SECTION (PINK PAGES) Use of a majority of Du Pont products is classified by various industries. The number following the product name indicates the page on which the description of the product appears. DEPARTMENTAL SECTION (BLUE PAGES) The names, addresses and telephone numbers of the departments, divisions and subsidiary com panies which manufacture or market the products are listed in alphabetical order, as follows: DEVELOPMENT DEPARTMENT, INSTRUMENT PRODUCTS DIVISION, page 188. ELASTOMER CHEMICALS DEPARTMENT, page 188. ELECTROCHEMICALS DEPARTMENT, page 189. EXPLOSIVES DEPARTMENT, page 190. Chemical Products Sales Division Explosives Products Sales Division FABRICS AND FINISHES DEPARTMENT, pages 191 to 192. Automotive and Industrial Finishes Sales Division Automotive Finishes Industrial Finishes Fabrics Sales Refinishing Materials Consumer Products Division Antifreeze Products Lawn and Garden Products Specialties Sales (Household; 7) , DUP210011141 Trade Paint Sales Industrial Maintenance Paints Poromeric Products Division FILM DEPARTMENT, page 193. Packaging Sales Industrial Sales GENERAL SERVICES DEPARTMENT, SURPLUS MATERIALS DIVISION,page 194. INDUSTRIAL AND BIOCHEMICALS DEPARTMENT, page 194. Bxochemicals Division Industrial Chemicals Division ORGANIC CHEMICALS DEPARTMENT, page 195. Dyes and Chemicals Division Freon Products Division Petroleum Chemicals Division PHOTO PRODUCTS DEPARTMENT, page 196. PIGMENTS DEPARTMENT, page 197. PLASTICS DEPARTMENT, page 198. Commercial Resisins Division Fluorocarbons Division Polyolefins Division Products Division REMINGTON ARMS COMPANY, INC., page 199. TEXTILE FIBERS DEPARTMENT, page 200. FOREIGN SUBSIDIARIES, AFFILIATED COMPANIES, and REPRESENTATIVES, pages 201 to 207. DUP210011142 PRODUCT INFORMATION CENTERS Product Information Centers have been established at various locations to assist those who call for in formation about Du Pont products. A trained expediter will take your call and see that it is channeled to a product specialist in the proper department. If a delay is probable, the expediter will see that a qualified person calls you back, in most cases on the same day. Call the center nearest you for prompt, courteous service. The locations are: Ba l t imo r e , Ma r y l a n d Telephone (Handled by Wilmington Center)................ PLaza 2-2506 Ch ic a g o , Il l in o is ................................... 7 South Dearborn Street ANdover 3-7000 Los An g e l e s , Ca l if o r n ia...................... 7051 Santa Monica Boulevard, Hollywood, California...................................... Hollywood 9-6375 Ne w Yo r k , Ne w Yo r k ......................... 350 Fifth Avenue................................................ 971-4771 Ph il ad e l ph ia , Pe n n s y l v a n ia ................(Handled by Wilmington Center).................. WAlnut 3-2493 Sa n Fr a n c is c o , Ca l if o r n ia ................ 1600 Trousdale Drive, Burlingame, California.......................................OXford 7-3876 Wa s h in g t o n , D. C.................................... (Handled by Wilmington Center)................... DUpont 7-0416 Wil min g t o n , De l a w a r e ...................... Ground Floor, Du Pont Building................... PRospect 4-2421 Du Pont personnel call: H. L. Brand R. D. Brendle D. E. Harkins C. T. Welsh, Jr. S. A. Shelley (outside! (Wilm IWilm. \ Area Ext. Ext. 2421 2253 2421 6081 2421 5820 2421 3281 2421 7724 IV DUP210011143 PRODUCTS SECTION Products are listed alphabetically by name (trademark, generic, chemical and classification), with a brief description and the name (abbreviated) of the Department which markets the product. A legend of the Department abbreviations and text abbreviations follows: DEPARTMENT ABRREVIATIONS Development-I.P.D.--Development Department, Instrument Products Division Elastomers--Elastomer Chemicals Department Electrochem--Electrochemicals Department Explo.-C.P.S.-- Explosives Department, Chemical Products Sales Division CXplO.-C.r.J.p. . .1 . r n p T?_____1~-,:______T\__________*.________i. -------JOAJJiUMYCS L/Cpctl linenL. Explosives Pioducts Sales Divibiun F.&F.-Fabrics--Fabrics and Finishes Department, Fabrics Sales (A.&I. Div.) F.&F.-Fin.(Auto)-- Fabrics and Finishes Department, Automotive Finishes (A.&I. Div.) F.&F.-Fin.(Refinish) -- Fabrics and Finishes Department, Refinish Sales (A.&I. Div.) F.&F.-Cons.--Fabrics and Finishes Department, Consumer Products Division (Antifreeze Products; Lawn and Garden Products) ' F.&F.-Cons.(Spec.)--Fabrics and Finishes Department, Consumer Products Division. Specialties Sales (Automotive, Household) F.&F.-Cons.(Trade)--Fabrics and Finishes Department, Consumer Products Division. Trade Paint Sales (including Industrial Maintenance paints) - F.&F.-Por.-- Fabrics and Finishes Department, Poromeric Products Division Film--Film Department Gen.Ser.-Surplus--General Services Department, Surplus Materials Division Ind.&Bio.-Bio.--Industrial and Biochemicals Department, Biochemicals Division Ind.&Bio.-Ind.-- Industrial and Biochemicals Department, Industrial Chemicals Division Orchem-D.&C.--Organic Chemicals Department, Dyes and Chemicals Division Orchem-Freon--Organic Chemicals Department, Freon Products Division Orchem-Pet.--Organic Chemicals Department, Petroleum Chemicals Division Photo Prod.-- Photo Products Department Pigments--Pigments Department Plastics--Plastics Department Plastics-Products Div.--Plastics Department, Products Division Rem. Arms--Remington Arms Co., Inc. Tex. Fibers--Textile Fibers Department TEXT ABBREVIATIONS A...................... ................Angstrom Unit atm.................... ................atmosphere bbl................... ................barrel B ...................... B.P..................... ................boiling point "C...................... cc...................... cm................... ................centimeter C.P.................... ................ Chemically Pure cu.ft................... ................cubic foot dia..................... F ...................... fl.oz.................... F.P..................... ft......................... ................foot/feet ft.-lb.................. ................foot-pound g......................... ................gram gal...................... ................gallon g/1................... g/ml.................. ................gram per milliliter N. F............................... psi................................... Sp.Gr. 1.5, 1.021, etc. Sp.Gr. 1.625 (15/15"C.), etc.. U.S.P. inch liter pound maximum minimum milliliter millimeter melting point National Formulary pounds per square inch specific gravity at 20C. referred to water at 4C. specific gravity at 15C. referred to water at 15C. United States Pharma copoeia DUP210011144 F "HOW-TO-USE" Products are listed alphabetically under their trademark:, generic, and chemical names. If the de scription of the product does not appear under one of its possible classifications, a cross reference (in italics) will direct you to the page on which the description can be found. Following the description of each product, an abbreviation for the Department or Division which sells or markets it appears in bold-face type. A key to these abbreviations is provided on page V. The following is a typical example of a product description and its cross references: DACRON POLYESTER FIBER: See Fibers, Synthetic, page 65. (This will appear in its alphabetical se quence under the letter D.) POLYESTER FIBER: See Fibers, Synthetic, Dacron, page 65. (This will appear in its alphabetical sequence under the letter P.) FIBERS, SYNTHETIC: (A classification heading where all fibers manufactured by DuPont appear in their alphabetical sequence.) Dacron Polyester Fiber: Textile fibers in the form of normal and high tenacity... Tex. Fibers The "Tex. Fibers" immediately following the description of Dacron, as indicated by the legend on page V, signifies the Textile Fibers Department. On the Textile Fibers Department page in the blue section, you will find listed the addresses and telephone numbers of the sales offices of that department, which you may contact for further information. For information about trademarks only, see the yellow pages. An asterisk (*) denotes an unreg istered trademark. Ail others are registered. For information about industry classifications only, see the pink pages. If you are not sure of the exact product or department, call the nearest Product Information Center (see page IV for listing) for assistance. VI DUP210011145 A A BLASTING POWDER: See Explosives, Black Blasting Powder, page 59. ABC Salt: Sold as 4', 4"'-Azobis-4-biphenylcarboxylic acid, disodium salt Technical, a Chemical Intermediate. Orchem D. & C. ACCELERATOR ACTIVATOR: See Activator for Natu ral and Synthetic Rubber, pegs 5. ACCELERATORS FOR NATURAL AND SYNTHETIC RUBBER: 552TM Accelerator: Piperidinium-pentamethylenedi- thiocarbamate--CH2(CH2)4NC(S)SNH2(CH2)4CH2. A cream-colored crystalline powder; Sp. Gr. 1.20; melts with decomposition at not lower than 167C. USE: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds; as pep tizer or plasticizer for neoprene. CONTAINERS: 125-lb. drums. Elastomers 808 Accelerator: Butyraldehyde-aniline condensa tion product. Amber liquid; Sp. Gr. 0.98. USE: To ac celerate and improve the vulcanization of natural and synthetic rubber, especially hard rubber; an activator for acidic accelerators. CONTAINERS: 425-lb. drums. Elastomers 833 Accelerator: Butyraldehyde-butylamine conden sation product. Reddish-amber liquid; Sp. Gr. 0.86. USE: To accelerate and improve the vulcanization of natural and synthetic rubber, especially neoprene cements. CONTAINERS: 225-lb. drums. Elastomers Conac S: N-Cyclohexyl-2-benzothiazole sulfenamide --C6H4SNCSNHCHC2H4CH2. Cream-colored powder or grains; Sp. Gr. 1.27; Melting range--93-100C. USE: To accelerate and improve the vulcanization of natural and synthetic rubber. CONTAINERS: 50-lb. bags. Elastomers Conac T: Cyclic thiuram. Yellow to greenish-yellow powder; Sp. Gr. 1.26; M. P. 96C. USE: As a delayed action accelerator for styrene butadiene rubber (SBR). CONTAINERS: 50-lb. boxes. Elastomers Diak No. 1: Hexamethylenediamine carbamate-- + H3N(CH2)6NHC02-. A very fine white powder; Sp. Gr. 1.27; Melting range 152-155C. USE: To vulcan ize Viton8 fluoroelastomer and polyacrylate elas tomers. CONTAINERS: 1-, 5- and 25-lb. drums. Elastomers Diak No. 2: Ethylenediamine Carbamate-- -hH3N(CH2)2NHC02- . A fine white powder; Sp. Gr. 1.37; Melting range 145-155C. USE: To vulcanize A-ACCELERATORS Viton fluoroelastomer and polyacrylate elastomers. CONTAINERS: V2 -, 1- and 5-lb. drums. Elastomers Diak No. 3: N,N'-dicinnamylidene-l, 6 hexanedi- amine; tan coarse powder; Sp. Gr. 1.09; Melting range 82-88C. USE: To vulcanize Viton4 fluoro elastomer and polyacrylate elastomers. CONTAINERS: 1-, 5-and 50-lb. drums. Elastomers Diak No. 4: An alicyclic amine salt; fine white powder; Sp. Gr. 1.23; Melting range 145-155C. USE: To vulcanize Viton" fluoroelastomer and poly acrylate elastomers. CONTAINERS: 1-, 5- and 25-lb. drums. Elastomers DOTG: Di-ortho-tolylguanidine--(CH3C6H4NH)CNH. A white nondusting powder; Sp. Gr. 1.20; M. P. 171 C. min. USE: To accelerate and improve the vulcanization of natural and synthetic rubber. CONTAINERS: 100-lb. drums. Elastomers Eptac 1: Zinc dimethyldithiocarbamate-- [(CH3)2NCS2]2Zn. White powder; Sp. Gr. 1.71; M. P. 240C. min. USE: To accelerate and improve the vulcanization of synthetic rubbers, especially ethylene propylene terpolymer (EPT). CONTAINERS: 50-lb. boxes. Elastomers Eptac 2: 50% Eptac 1, 50% Thiuram M. Off-white, dust-free powder. Sp. Gr. 1.52. USE: To accelerate and improve the vulcanization of synthetic rubbers, especially ethylene propylene terpolymer (EPT). CON TAINERS: 50-lb. boxes. Elastomers MBT: 2-mercaptobenzothiazole--C6H4SC(SH)N. Pale yellow powder; Sp. Gr. 1.52. USE: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 50-lb. bags. Elastomers MBTS: 2-Benzothiazolyl disulfide--(C6H4SCN)2S2. Pale yellow powder; Sp. Gr. 1.54. USE: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 50-lb. bags. Elastomers MocaTM Curing Agent: 4,4'-Methylene-bis (2-chloro- aniline). Tan-colored pellets; Sp. Gr. 1.44; Melting range 99-107C. USE: Curing agent for Adiprene L urethane rubber, other urethane rubbers and epoxy resins. Co n t a in e r s : 100-lb. drums. Elastomers NA-22: 2-Mercaptoimidazoline--CH2CH2NC(SH)NH. A white powder; Sp. Gr. 1.42; M. P. 195 C. min. USE: To accelerate and improve the vulcanization of neoprene. CONTAINERS: 125-lb. drums. Elastomers Permalux Neoprene Accelerator: Diorthotolylguanidine salt of dicatechol borate-- (H0C6H40)2BN(NHC,H4CH,)2. Light grayish-brown powder; Sp. Gr. 1.25; F. P. 165C. min. USE: To ac- DUP210011146 ACCELERATGRS-ACETYL ACCELERATORS (Cont.) celerate and improve the vulcanization of neoprene; a nondiscoloring antioxidant for natural and synthetic rubber. CONTAINERS: 125-lb. drums. Elastomers Polyac Butyl Rubber Conditioner: 25% polypara- dinitrosobenzene--[C6H4(NO)2]x--with an inert wax. Dark brown waxy pellets; Sp. Gr. 0.96. USE: A proces sing aid and accelerator for the vulcanization of butyl rubber. CONTAINERS: 100-lb. drums. Elastomers TepidoneTM Rubber Accelerator: Water solution of sodium dibutyldithiocarbamate--(C4H9)2NC(S)SNa. An amber liquid; Sp. Gr. 1.08. USE: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 440-lb. drums. Elastomers Tetrone A Rubber Accelerator: Dipentamethylene- thiuram tetrasulfide--[CH2(CH2)4NCS]2S4. Light gray powder; Sp. Gr. 1.53; M. P. 110C. min. USE: To ac celerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 125-lb. drums. Elastomers Thionex Rubber Accelerator: Tetramethylthiuram monosultlde--[(CH3)2NCS]2S. Lemon-yellow powder or grains; Sp.Gr. 1.39. M. P. 105C. min. USE: To ac celerate the vulcanization of natural and synthetic rubber. CONTAINERS: 50-lb. boxes. Elastomers Th iuram E: Tetraethylthiuram disulfide-- [(CjHsJjNCSjjS.,. White powder or grains; Sp. Gr. 1.30; M. P. 66C. min. USE: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 100-lb. boxes. Elastomers Thiuram M: Tetramethylthiuram disulfide -- [(CH3)2NCS]2S2. White powder or grains. Sp. Gr. 1.44; M. P. 144C. min. USE: To accelerate and im prove the vulcanization of natural and synthetic rub ber and latex compounds. CONTAINERS: 50-lb. boxes. ' Elastomers Zenite Rubber Accelerator: 90% zinc salt of 2mercaptobenzothiazole--[C6H4SC(S)N2]Zn and 10% inert hydrocarbon. A light cream-colored, waxy powder; Sp. Gr. 1.55. USE: To accelerate and improve the vulcanization of natural and synthetic rubber and latex compounds. CONTAINERS: 50-lb. bags. Elastomers Zenite A Rubber Accelerator: 97% Zenite and 3% tetramethylthiuram monosulfide. (See Thionex*, above.) A light cream-colored, very fine, nondusting powder; Sp. Gr. 1.56. USE: To accelerate and improve the vulcanization of natural and synthetic rubber. Co n t a in e r s : 150-lb. drums. Elastomers Zenite AM Rubber Accelerator: Zenite A, specially ground. A light cream-colored, ultra-fine, nondusting powder; Sp. Gr. 1.56. USE: To accelerate and improve the vulcanization of natural and synthetic rubber. CONTAINERS; 125-lb. drums. Elastomers Zenite Special Rubber Accelerator: Zinc salt of 2-mercaptobenzothiazole-[CaH4SC(S)N2]Zn. A light cream-colored powder; Sp. Gr. 1.70. USE: To acceler ate and improve the vulcanization of natural and rc! latex corr>po'GPids CONTAINERS* 50-lb. bags. Elastomers ACELE ACETATE FIBER: See Fibers, Synthetic, page 65. ACETAL RESIN: See Plastics, Delrin, page 125. 5-ACETAMIDO-8-AMINO-2-N APHTHA LENESULFONIC ACID TECHNICAL. Acetylamino-l,6-Cleve's Acid. Paste form; a Chemical Intermediate. Orchem D. & C. 8-ACETAMIDO-5-AMINO-2-N APHTH ALENESULFON1C ACID TECHNICAL. Acetylamino-l,7-Cleve's Acid. Paste form; a Chemical Intermediate. Orchem D. & C. 8-ACETAMIDO-2-NAPHTHALENESULFONIC ACID, MAGNESIUM SALT TECHNICAL. Acetyl-1,7Cleve's Acid. Solid form; a Chemical Intermediate. Orchem D. at C. ACETAMINE DEVELOPER: See Dyes, page 53. ACETAMINE DYES: See Dyes, page 53. ACETATE, CELLULOSE: See Cellulose Acetate Flake, page 25; Plastics, Plastacele, page 127. ACETATE FIBER: See Fibers, Synthetic, Ace/e, page 65. ACETATE FILM: See Film, Acetate, page 65. ACETATE LEUCO VIOLET: Sold as l,4-Diamino-2,3-di- hydroanthraquinone Technical, a Chemical Inter mediate. Orchem. D. & C. ACETATE, POLYVINYL: See Resins (Not Molding), Elvacet, page 134. ACETIC ACID: See Acids, page 3. ACETYLAMINO-1,6-CLEVE'S ACID: Sold as 5-Aceta- mido-8-amino-2-naphthalenesulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. ACETYLAMINO- 1,7-CLEVE'S ACID: Sold as 8-Aceta- mido-5-amino-2-naphthalenesulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. 1-ACETYLAMINO-7-NAPHTHOL: Sold as N-(7-Hy- droxy-l-naphthyl) acetamide Technical, a Chemical Intermediate. Orchem D. & C. DUP210011147 ACETYL-1,7-CLEVE'S ACID: Sold as 8-Acetamido-2- naphthalenesulfonic acid, magnesium salt Technical, a Chemical Intermediate. Orchem D. & C. ACETYL-p-PHENYLENEDI AMINE: Sold as p-Aminoacetanilide Technical, a Chemical Intermediate. Orchem D. & C. ACETYLENE TETRACHLORIDE: See Tefrach/oroefbane, page 7 57. ACIDS: Acetic Acid--Glacial--Reagent (Ethanoic Acid, Vinegar Acid)--CH3COOH: Clear, colorless liquid with pungent odor; crystallizes to a solid at 60F. (15.6C.); soluble in water, alcohol and ether; Sp. Gr. 1.048; B. P. 117.8C. USE: As a reagent in chemical analysis or where an especially high purity acid is required. CONTAINERS: 1- and 5-pt. bottles, 65- and 13-gal. carboys. Ind.&Bio.-Ind. Adipic Acid--(CH2)4(COOH)2: White crystalline solid; M.P. 152C.; soluble in alcohol; slightly soluble in water. USE: In manufacture of plasticizers and poly ester resins; in organic synthesis; as an edible food acid. CONTAINERS: 50-lb. paper bags and 2,000-lb. "Pillar Pac." Ind.&Bio.-Ind. Battery Acid (Electrolyte Acid, Storage Battery Acid, Sulfuric Acid)--H2S04: Clear, colorless, cor rosive liquid available generally at Sp. Gr. 1.835. USE: As electrolyte in lead type storage batteries. CONTAINERS: Tank cars and tank trucks. Ind.&Bio.-Ind. Chlorosulfonic Acid--Technical--CIS03H: Clear, colorless to light straw-colored, oily, fuming, corrosive liquid with pungent odor; decomposed by water or alcohol; Sp. Gr. approximately 1.75; F. P. below -37C. ; B. P. 154C. ; minimum 98.5% CISOjH. USE: In sulfation and sulfonation of organic compounds for manufacture of sulfonated oils, intermediates for dyes and pharmaceuticals, pesticides, detergents and ion exchange resins; for production of anhydrous HCI and smoke-producing chemicals. CONTAINERS: 700-lb. steel or stainless steel drums, tank cars and tank trucks. Ind. & Bio.-lnd. Diglycolic Acid--0(CH2C00H)2: White crystalline solid; M. P. (pure) 148C.; soluble in water and alco hol; pH of 10% aqueous solution 1.4. Forms a nonhygroscopic monohydrate at relative humidities above 72% at 25 C. USE: In manufacture of resins and plasticizers; in organic synthesis; sequestering agent; emulsion breaker in petroleum; coagulant in rubber and plastics. CONTAINERS: 50-lb. paper bags. Ind. & Bio.-lnd. ACETYL-AGDS Dudean No. 1 Inhibited Sulfuric Acid--Tech nical (60 B. Sulfuric Acid Containing an Acid Pickling Inhibitor): Clear, reddish-brown liquid; miscible with water; Sp. Gr. 1.706; F. P. below -- 10.8C. USE: In pickling iron and steel; for descal ing and cleaning of steel and other metals under con ditions where it is desirable to inhibit the acid corro sion of steel and ferrous alloys. CONTAINERS: Tank cars and tank trucks. Ind. & Bio.-lnd. Dudean No. 2 Hydrochloric Acid Solution In hibited-- Technical: Clear, water-white liquid with pungent odor; miscible with water; Sp. Gr. 1.142; F. P. below -40C. USE: In pickling iron and steel; for removing deposits, including hard water scale, hy drated iron and rust from evaporators, condensers, water distributing lines, water well screens, etc., where it is important to inhibit acid corrosion of steel and other ferrous metals. CONTAINERS: Tank cars and tank trucks. Ind. & Bio.-lnd. Formic Acid -- Reagent (Methanoic Acid)--90% HCOOH in Water Solution: Colorless liquid with irritating and penetrating odor; soluble in water, alcohol, ether and glycerin. USE: As a reagent in chemical analysis or where an especially high purity acid is required. CONTAINERS: 13-gal. carboys. Ind. & Bio.-lnd. Formic Acid--Technical (Methanoic Acid) -- HCOOH in Water Solution: Colorless liquid with irritating and penetrating odor; soluble in water, alcohol, ether and glycerin. Sp. Gr. F. P. 85% St r e n g t h 1.201 9F. 90% St r e n g t h 1.210 24F. USE: In dyeing, printing and finishing of textiles; in manufacture of formates, fat and oil hydrogenation catalysts, synthetic camphor, pharmaceutical inter mediates, solvents; for dyeing and deliming in tanning leathers; manufacture of vinyl resin plasticizers; in electroplating; for coagulation of rubber latex. CON TAINERS: 125- and 127-lb. carboys, 515- and 525-lb. drums, tank cars and tank trucks. Ind. & Bio.-lnd. Glycolic Acid: See Acids, Hydroxyacetic Acid, page 4. Hydrochloric Acid -- Reagent--36.5-38% HCI in Water Solution: Clear, colorless, fuming corrosive liquid with pungent odor; soluble in water, alcohol and ether; Sp. Gr. min. 1.1854, max. 1.1923; F. P. below -- 24F. ( -- 31.1 C.). USE: For reagent or ana lytical purposes, or where hydrochloric acid of ex tremely high purity is required; in manufacture of food products. CONTAINERS: 1- and 5-pt. bottles, 6jand 13-gal. carboys, tank trucks. Ind. & Bio.-lnd. DUP210011148 ACIDS ACIDS (Cont.) Inhibited: See Acids, Duclean, page 3. Hydrochloric Acid -- Technical and Food Processing (Muriatic Acid, Chlorohydric Acid, Hydrogen Chloride)--HCI in Water Solution: Clear, colorless or yellowish corrosive liquid with pungent odor; misc ible with water and alcohol. Gr a d e Sp. Gr . %HCI F.P. BELOW Methacrylic: See Methacrylate Monomers, page 102. Mixed Acid--Technical (Nitrating Acid): Mixture of Nitric (HN03) and sulfuric (H2S04) acids. USE: As a nitrating agent in the manufacture of explosives, nitro cellulose, nitroglycerin, dyes and various organic inter mediates. CONTAINERS: 700-lb. metal drums, tank cars and tank trucks. Explo.-C.P.S. 1 O D. 20B. 22B. 23B. 11 . 1t *4-t-0zl 1.160 1.179 1.189 27.92 31.45 35.21 37.14 -- 40F. -- 40F. -- 40F. -- 40F. USE: In metal pickling an d descaling; in manufacture of inorganic and organic chlorides, chlorinated syn- thetic resins and plastics; in the food industry for the hydrolysis of protein and starch, inversion of sugar and manufacture of edible gelatin; in carbonizing wool and as a bleaching and dyeing assistant in the textile industry; as a prefluxing agent for galvanizing and soldering; in the paper industry for cleaning and scouring wires, screens and felts; for recovery of glycerin in the manufacture of soap; in the purification of sand and clay; in deliming, tanning and dyeing of leathers; for etching aluminum. Co n t a in e r s : Tank cars and tank trucks. Ind. & Bio.-lnd. Hydrochloric Acid, Inhibited: See Adds, Duclean No. 2 Inhibited Hydrochloric Acid, page 3. Hydrofluoric Acid--Technical -- HF: Clear, colorless, fuming liquid; attacks iron, glass and ceramicware. muriuii'c Add: See Aads, Hydrochloric Acid-- Technical, above. Muriatic Acid, Inhibited: See Acids, Duclean No. 2 Hydrochloric Acid Solution Inhibited--Technical, page 3. Nitric Acid--HNOa: In all concentrations. Clear, colorless to yellow corrosive liquid. USE: Metallurgy; manufacture of dyes and dye intermediates; etching agent for photoengraving; plastic and synthetic fiber manufacture; manufacture of explosives; general oxi dation purposes. CONTAINERS: Tank cars and tank trucks. Explo.-C.P.S. Nitric Acid--Reagent--69-71% HN03 in Water Solution: Clear, colorless, highly corrosive liquid; soluble in water and ether; decomposes alcohol; Sp. Gr. 1.416-1.426; F. P. below -40F. (-40C.). USE; As a reagent in chemical analysis and for other uses for which HNOs of extremely high purity is required; as an etchant in metallography. CONTAINERS: 1- and 5-pt. bottles, 6^- and 13-gal. carboys, tank trucks. Ind. & Bio.-lnd. Gr a d e St r e n g t h Sp. Gr . F. P. Sulfamic Acid--Technical--Crystal and Granular Aqueous Anhydrous 70% 99.95% 1.258 1.0 -94F. -118F. USE: As a pickling agent for stainless steels and for the removal of silica and siliceous scales from cast iron and steel products; in manufacture of alkylation catalysts, refrigerants, fluorides and acid fluorides; for etching and frosting glass. CONTAINERS: Tank cars and tank trucks. Ind. & Bio.-lnd. Grades, HS03NH2: White crystalline or granular solid, soluble in water; aqueous solutions approach the common mineral acids in acidity; all common salts highly water soluble. USE: For removing scales and deposits from boilers, heat exchangers, condensers, evaporators, jacketed vessels, etc.; felt shower water pH adjustment to retard felt fill-up; stablizing agent for chlorine and hypochlorite when used for bacteria and algae control in swimming pools, paper mills and recirculating water systems and for bleaching of paper Hydroxyacetic Acid (Glycolic Acid)--Technical pulp and textiles. Oil well descaling agent; as an in Grade 70%--HOCH2COOH: Light straw-colored gredient in household cleaning formulations; in nitrite liquid containing approximately 70% hydroxyacetic removal in azo dye manufacture and piece dyeing of acid with traces of other organic acids; F. P. 10C. textiles and leather; in sulfation of alcohols; as a USE: In dyeing and tanning of leather; dyeing of tex catalyst for urea-formaldehyde resins; as the electro tiles; manufacture of cleaning compounds for food lyte in plating baths. CONTAINERS: 400-425-lb. fiber processing equipment, water wells and supercritical boilers; adhesives; adhesives emulsifier; neutralizing drums. Ind. & Bio.-lnd. agent--pH control; cement additive; sequestering Sulfuric Acid--Reagent--95--98% H2S04 in jt agent; bright-dipping of copper, electropoiishing of stainless steel, and electroplating. CONTAINERS: 55-gal. Water Solution: Clear, colorless, heavy, oily liquid; soluble in water with evolution of heat; Sp. Gr. 1.84; lined steel drums, tank trucks and tank cars. F.P. -- 15C. USE: As a reagent in chemical analysis or I Ind.&Bio.-Ind. where sulfuric acid of an especially high purity is re- l 4 11 4 i i DUP210011149 ACIDS-ADHES1VE ACIDS (Cont.) quired. CONTAINERS: 1- and 5-pt. bottles, 6j- and 13-gal. carboys, tank trucks. ind. & Bio.-lnd. Sulfuric Acid, Oleum: Nearly colorless, fuming, cor rosive liquid; soluble in water with violent evolution of heat; furnished in various strengths. USE: As an in gredient in mixed acids for nitration purposes, such as in manufacture of explosives, dyes, intermediates and II. .]__________________________ mil utcii uiu^c piuuucn; marine and petroleum oils; in refining petroleum; for fortification of dilute sulfuric acid; for general organic sulfonation. CONTAINERS: 775-825-lb. drums, tank cars, tank trucks and barges. Ind. & Bio.-lnd. Sulfuric Acid, Inhibited: See Acids, Duclean No. 7 Inhibited Sulfuric Acid, page 3. Sulfuric Acid -- Technical--H2S04: Clear, colorless, heavy, oily, corrosive liquid; soluble in water in all proportions with evolution of heat. All commercial strengths. USE: In manufacture of superphosphate fertilizers, ammonium sulfate from by-product coke ovens, mineral colors, explosives, inorganic acids, phosphates, alum, intermediates, dyes and other or ganic chemicals; in refining of petroleum and manu facturing of sulfonated oils; for pickling iron and steel and bright dipping nonferrous metals; in pickling of hides and chrome tanning of leather; in sizing and parchmentizing paper; in manufacture of synthetic rubber latex, rayon, synthetic detergents, sugar and starch; as a general dehydrating agent; assistant in dyeing, bleaching, carbonizing, mercerizing textiles; production of bleaching clays; animal and vegetable oil refining; catalyst in alkylation process for manu facture of high octane gasoline. CONTAINERS: 750-lb. steel drums, tank cars, tank trucks and barges. Ind. & Bio.-lnd. Terephthalic Acid (TPA) -- Technical -- HOOCC4H4COOH: Pale yellow crystalline solid. Aromatic diabasic acid, M. P. 425C; insoluble in water and most organic solvents. Undergoes typical reactions of organic carboxylic acids and ring substi tution. Useful as polymer intermediate, and as raw material for plasticizers, alkyds with high thermal stability and as a cross-linking agent. CONTAINERS: 75- and 325-lb. net fiber drums. Explo.-C.P.S. Vinegar Acid: See Acids, Acetic Acid, page 3. ACID AND RUST INHIBITOR: See Automotive Special ties 7 Products, Acid and Rust Inhibitor, page 18. ACOUSTICAL CEILING PAINT: See Finishes, Trade Sales (Consumer Products), Flat Wall Paints and Sealers, page 79. ACRIDINE YELLOW BASE: Sold as 3,6-Diamino-2,7dimethylacridine Technical, a Chemical Intermediate. Orchem D. & C. ACRIDINE YELLOW SULFATE: Sold as 3,6-Diamino-2,7- dimethylacridine sulfate Technical, a Chemical Inter mediate. Orchem D. & C. ACRYLIC FIBERS: See Fibers, Synthetic, Orion*, page 65. ACRYLIC LACQUER: See Finishes, Automotive, page 69; Finishes, Refinish, page 72. ACRYLIC RESIN: See Resins (Not Molding), Lucite'*, page 136; Plastics, Lucite, page 126. ACRYLIC RESIN COATED FABRICS: See Finishes, In dustrial, Synthetic Resin Coated Fabrics, page 76. ACRYLIC RESIN DENTAL MATERIALS: See Plastics, Lucite Acrylic Resin Denial Materials, page 126. ACRYLIC RESIN WIRE ENAMELS: See Finishes, Indus trial, Wire Enamels, page 76. ACTIVATOR FOR NATURAL AND SYNTHETIC RUBBER: Barak Rubber Activator: Dibutylammoniumoleate(C4H9)2NH2COO(C]7H33). Dark amber liquid. Sp. Gr. 0.88. USE: As an activator for other rubber acceler ators to improve the vulcanization of natural and synthetic rubber. CONTAINERS: 175-lb. drums. Elastomers ACUDET BLASTING CAPS: See Explosives, Blasting Accessories and Supplies, Blasting Caps, Electric, page 59. ADDITION AGENTS (PLATING): See Electroplating Products, page 55. ADDITIVES, FUEL OIL: See Petroleum Chemicals, Fuel Oil Additive, Petroleum, page 113. ADDITIVES, GREASE AND LUBRICATING OIL: See Petroleum Chemicals, Grease and Lubricating Oil Addi tives, page 114. ADDITIVES, MOTOR OIL: See Automotive Specialties 7 Products, M.O.A., page 19. ADDITIVES, MULTIFUNCTIONAL: See Chemicals, Multifunctional Additives, page 114. Petroleum Petroleum, ADHESIVE BASES: See Ludox, page 100; Resins (Not Molding), Elvacet, Elvanol, Elvax*, Lucite and Zytel*, pages 134 to 137; Sodium CMC, page 142; Sodium Silicate Solution, page 143. DUP210011150 ADHESIVES-ALKANOL^ (Also See Cements, page 26) ALCOHOLS: Hot Melt Bookbinding Adhesives: Synthetic resin adhesives, solvent tree. Applied in melted form for bookbinding purposes, principally binding together paper of books, magazines, catalogs, etc. and adher ing of outside covers to magazines, catalogs, etc. CONTAINERS: Metal and fiber containers holding solid pack of 50- and 95-lbs. F.&F.-Fin.-( Ind.) Mineral Adhesive Solution--Technical: A mineral base adhesive modified to obtain rapid wetting and good adhesion. USE: For bonding metal foil to paper; for bonding insulating materials to metal. CON TAINERS: 55-gal. drums and tank cars. Ind. & Bio.-lnd. ADIPIC ACID: See Acids, page 3. ADIPRENE URETHANE RUBBER: See Synthetic Rub ber, Adiprene'&, page 146. ADLUXTM PHOTOGRAPHIC FILM: See Photographic Products, page 123. AERIAL FILMS: See Photographic Products, page 119. AEROSOL PROPELLENTS: See Freon4- Products, page 85; Freon--Other Products, Methylene Chloride, page 88; Methyl Chloride, page 103; Methylene Chlor ide, page 104. AFA-1: See Petroleum Chemicals, Corrosion Inhibitors, page 1 7 3. AFFLAIR FLAKE PIGMENTS: See Pigment Colors, page 124. AGRICULTURAL CHEMICALS: See Fertilizers, page 64; Fungicides, page 89; Insecticides, page 24; Nutrition and Therapy Products, page 108; Seed Treatments, page 138; Weed and Brush Killers, page 162. AGRICULTURAL FILM: See Film, Polyethylene, page 67; Film, Mylar Polyester, page 66. AIR TOOLS: See Tools, Construction and Industrial, page 154. AKROFLEX RUBBER ANTIOXIDANT: See Antioxi dants for Natural and Synthetic Rubber, page 15. ALATHON POLYETHYLENE RESIN. See Plastics, page 125. ALBONE HYDROGEN PERODIXE: See Hydrogen Peroxide, page 92. ALCOHOL PHOSPHATES: See Zelec, page 164. ALCOHOL SULFATES: See Duponol, page 52. Cetyl: See Loral 24, page 100. Decyl: See Loro! 22, page 100. Dodecyl: See Loral 5, and Lord 7, page 99. Ethoxylated: See Alkanol Nonionic Surface Active Agents, page 6. Fatty: See Ocenol, page 109; Lorol Fatty Alcohols, page 99. Lauryl: See Lorol 5 and Lord 7, page 99. Methyl: See Methanol, page 103. n-Octanol: See Lorol' 20, page 99. Oleyl: See Ocenol, page 109. Polyvinyl: See Resins (Not Molding), Elvanol, page 135. Stearyl: See Lord 28, page 100. ALDRIN: See Seed Treatments, Mersecf, page 139. ALDYL POLYMERIC PIPE: See Plastics, page 725. ALKANOL NONIONIC SURFACE ACTIVE AGENTS: A series of five fatty alcohol ethylene oxide conden sation products used as detergents, dispersing and emulsifying agents in the paper, leather, textile and a wide variety of miscellaneous industries. Included In the group, in ascending order of ethoxylation, are Alkanol OA, Alkanol OE, Alkanol OJ, Alkanol OP and Alkanol HC. Orchem D. & C. Alkanol 189-S Surface Active Agent: Saturated hydrocarbon sodium sulfonate. A wetting and pene trating agent which retains its activity in hard water, acid and alkaline solutions. Orchem D. & C. Alkanol B Surface Active Agent: Sodium alkyl- naphthalene sulfonate powder. A surface tension re ducing agent in the paper, leather, pigment and metal processing industries and a wetting and dispersing agent for dyes. Orchem D. & C. Alkanol BG Solution Surface Active Agent: So dium alkylnaphthalene sulfonate. A wetting and dis persing agent similar to Alkanol B in properties. Orchem D. & C. Alkanol DW Solution Surface Active Agent: A compounded anionic detergent with wetting and dis- r:: DUP210011151 ALKANOL&-AMINO ALKANOL (Cont.) persing qualities for general use; resistant to hard water, acids and alkalies. Orchem D. & C. Alkanol HCS Surface Active Agent: Liquid non ionic detergent based on Alkanol HC. A textile dye ing assistant tor use with synthetic fibers. Used for washing paper mill felts. Orchem D. & C. Alkanol LN Surface Active Agent: Cationic dyeing assistant for use with acid dyes on nylon filament fibers. Orchem D. & C. Alkanol S Flakes Surface Active Agent: Teira hydronaphthalene sodium sulfonate. A dispersing and solubilizing agent. Orchem D. & C. Alkanol TD Dyeing Assistant: Anionic retarding agent for cationic dyes. Orchem D. & C. Alkanol WXN Surface Active Agent: A com pounded anionic wetting agent with rewetting properties. Orchem D. & C. ALUM--IRON FREE: See Aluminum Sulfoie--Iron Free, page 7. ALUMINA, COLLOIDAL: See fiaymal, page 21. ALUMINUM CHLORIDE--TECHNICAL--AICI3 -6H20 --CRYSTAL: Pale yellowish, granular, slightly odorous, deliquescent crystals; contains 96.5% AICI3 6H20; sol uble in water, alcohol and ether. Solution: 50% AICI3-6H20 in water. Clear, water white, corrosive liquid; miscible with water, alcohol and ether; gravity 32B. USE: In photographic fixing baths; in manufacture of dry colors, aluminum hydroxide gel and roofing granules. CONTAINERS: Crystals--300-lb. polyethylenelined fiber drums. Solution -- 550-lb. polyethylene drums (steel overpack), tank cars and tank trucks. Ind.&Bio.-Ind. ALUMINUM COMPLEX 1 01--TECHNICAL: A Werner iype aluminum complex in isopropanof. USE: As a water repellent and sizing treatment for paper, textiles and other materials; for treatment of leather, masonry and other negatively charged surfaces; as a back-size re lease coating on pressure sensitive tape and for in- solubilizing various water soluble or swellable coatings. CONTAINERS: 15- and 53-gal. polyethylene-lined steel drums. Ind.&Bio.-Ind. ALUMINUM HAMMERED FINISH: See Finishes, Re finish, page 71. ALUMINUM PAINTS: See Finishes, Industrial, page 73; Finishes, Re finish, page 71. ALUMINUM, PORCELAIN FOR: See Ceramic Products, page 27. ALUMINUM POWDER AND PASTE: See Finishes, In dustrial, page 74. ALUMINUM SULFATE--IRON FREE--U.S.P., FOOD PROCESSING AND TECHNICAL--AI2(SOJ 18H20: White lumps or granules; soluble in water; insoluble in alcohol. USE: In manufacture of aluminum soaps, print- ng inks and lake colors; in tanning of white leather; in sizing and coating of paper; baking powder; in pharma ceuticals and styptic products; for brining of pickles. CONTAINERS: 100-lb. bags. Ind.&Bio.-Ind. AMINE 248: Dark colored liquid or paste consisting of a non-volatile amine mixture with bis-(hexamethylene) triamine and its homologues as principal components. Becomes homogeneous when warmed slightly above room temperature and disperses readily in water. Con tains approximately 10 milliequivalents per gram of amine at a pH of 3. USE: Coagulant and flocculating agent, ingredient of antistripping agents for asphalt, corrosion inhibitor, anchoring agent, for making cationic amine salts. CONTAINERS: 55-gal. drums and tank cars. Ind.&Bio.-Ind. 2,4-D AMINE: See Lawn and Garden Products, Lawn Weed Killer, page 98. p-AMINOACETANIUDE TECHNICAL: Acetyl-p-phenyl- enediamine. Granular paste form; a Chemical Inter mediate. Orchem D. & C. 5-AMINO-2-( p-AMINOANILINO) BENZENESULFONIC ACID TECHNICAL: Phenylene Nerol Acid; 4,4'-Di- aminodiphenylamine-2-sulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. o-AMINO ANISOLE: Sold as o-Anisidine Technical and S Technical, a Chemical Intermediate. Orchem D. & C. p-AMINO ANISOLE: Sold as p-Anisidine Technical, a Chemical Intermediate. Orchem D. & C. 1 -AMINOANTHRAQUINONE TECHNICAL: Crystalline solid form; a Chemical Intermediate. Orchem D. & C. DUP210011152 AMINO 2-AMINOANTHRAQUINONE TECHNICAL: Crystalline solid form; a Chemical Intermediate. Orchem D. & C. N-(5-AMINO-l-ANTHRAQUINONYL) ANTHRANILIC ACID TECHNICAL: Powder form; a Chemical Inter mediate. Orchem D. & C. N-{ 8-AMIN0-1 -ANTHRAQUINONYL) ANTHRANILIC ACID TECHNICAL: Amorphous solid form; a Chem ical Intermediate. Orchem D. & C. 4-AMINOAZOBENZENE-3,4'-DISULFONIC ACID TECHNICAL: 6-Amino-3,4'- azodibenzenesul- fonic acid. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. 4-AMINOAZOBENZENE HYDROCHLORIDE TECH NICAL. p-Phenylazoaniline hydrochloride. Crystal line paste form; a Chemical Intermediate. Orchem D. & C. 4- AMI NOAZOBENZENE-4'-SULFONIC ACID, SO DIUM SALT TECHNICAL: p-(p-Aminophenylazo) benzenesulfonic acid, sodium salt. Paste form; a Chemical Intermediate. Orchem D. & C. 6-AMI NO-3,4 -AZODIBENZENESULFONIC ACID: Sold as 4-Aminoazobenzene-3,4'-disulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. AMINO AZOTOLUENE TECHNICAL: 4(-o-Tolylazo)- o-toluidine (NH2=1). Crystalline solid form; a Chemical Intermediate. Orchem D. & C. AMINOAZOTOLUENE SODIUM SULFONATE: Sold as 4-(4-Amino-m-tolylazo)-m-toluenesulfonic acid Tech nical, a Chemical Intermediate. Orchem D. & C. 5- AMINO-l ,2-BENZACRIDINE: Sold as 4-Amino- naphth(2,3-c)acridine-5,8,l 4(13H)-trione Technical, a Chemical Intermediate. Orchem D. & C. 8-AM1NQ-1,2-BENZACRIDINE: Sold as 1-Amino- naphth(2,3-c)acridine-5,8,14(13H)-trione Technical, a Chemical Intermediate. Orchem D. & C. 6- ( p-{ p-AMINOBENZAMIDO) BENZAMIDO) -1 -NAPH- THOL-3-SULFONIC ACID TECHNICAL: p-Amino- benzoyl PAB J Acid. Paste form,- a Chemical Inter mediate. Orchem D. & C. 6-(m-AMINOBENZAMIDO)-l-NAPHTHOL-3-SUL FONIC ACID TECHNICAL: m-Aminobenzoyl J Acid. Paste form,- a Chemical Intermediate. Orchem D. & C. 6-( p-AMINOBENZAMIDO)-1 -N A P H T H OL-3-SULFONIC ACID TECHNICAL: p-Aminobenzoyl J Acid. Paste form; a Chemical Intermediate. Orchem D. & C. 2-AM!NO-p-BENZENEDISULFONIC ACID: Sold as Aniline-2,5-disulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. m-AMINOBENZENESULFONIC ACID, SODIUM SALT: Sold as Sodium metanilate Technical, a Chemical Intermediate. Orchem D. & C. 5-AMlNO-2(3H)-BENZIMIDAZOLONE TECHNICAL: Paste form; a Chemical Intermediate. Qrrkam H & C 0- AMINOBENZOIC ACID: Sold as Anthranilic acid Technical, a Chemical Intermediate. Orchem D. & C. p-AMINOBENZOIC ACID DRY TECHNICAL: Crystal line solid form; a Chemical Intermediate. ` Orchem D. & C. p-AMINOBENZOIC ACID PASTE TECHNICAL: Crystal line paste form; a Chemical Intermediate. Orchem D. & C. m-AMINOBENZOYL J ACID: Sold as 6-(m-Amino- benzamido)-l-naphthol-3-suifonic acid Technical, a Chemical Intermediate. Orchem D. & C. p-AMINOBENZOYL J ACID: Sold as 6-(p-Amino- benzamido)-l-naphthol-3-sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. p-AMINOBENZOYL PAB J ACID: Sold as 6-(p-(pAminobenzamido)benzamido)-1-naphthol-3 - sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. 1- AMINO-4-BROMO-2-ANTHRAQUINONESULFONIC ACID, SODIUM SALT DRY TECHNICAL: Solid form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-4-BROMO-2-ANTHRAQUINONESULFONIC ACID, SODIUM SALT PASTE TECHNICAL: Brom- amine Acid. Paste form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-4-BROMO-2-METHYLANTHRAQUINONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-2-BRQMQ-4-P-TOLUIDINOANTHRA- QUINONE TECHNICAL: Blue SKY Base. Powder form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-5-CHLOROANTHRAQUINONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-8-CHLOROANTHRAQUINONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. DUP210011153 AMiNO 2- AMINO-1 -CHLOROANTHRAQUINQNE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-2-METHYLANTHRAQUINONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 3- AM1NO-4-CHLOROBENZENESULFONIC ACID: Sold as 4-Chlorometanilic acid Technical, a Chemical Intermediate. Orchem D. & C. 1-AMINO-2,4-DIBROMOANTHRAQU1NONE TECH NICAL. Powder form; a Chemical Intermediate. n p. r 5-AMlNO-2-(2,3-DIHYDRO-2-OXO-5-BENZIMID- AZOLYLAMINO) BENZENESULFONIC ACID TECHNICAL; Asa azolone. Paste form; a Chemical Intermediate. Orchem D. & C. 2- AMINO-4,6-DINITROPHENOL, SODIUM SALT. Sold as Sodium picramate Technical, a Chemical Inter mediate. Orchem D. & C. p-AMINODIPHENYLAMINE TECHNICAL: N-Phenyl-p- phenylenediarfiine. Crushed solid form; a Chemical Intermediate. Orchem D. & C. AMINO G ACID: Sold as 7-Amino-1,3-naphthalenedi- sulfonic acid, potassium salt Technical, a Chemical Intermediate. Orchem D. & C. 1-AMINO-4-HYDROXYANTHRAQUINONE TECH NICAL: Paste form; a Chemical Intermediate. Orchem D. & C. AMINO J ACID: Sold as 6 Amino 1,3-naphthalenedisul- fonic acid, disodium salt Technical, a Chemical Inter mediate. Orchem D. & C. 1-AMINO-4-METHOXYANTHRAQUINONE TECH NICAL: Paste form; a Chemical Intermediate. Orchem D. & C. 3- AMINO-4-METHOXYBENZENESULFONIC ACID: Sold as 4-Methoxymetanilic acid Technical, a Chem ical Intermediate. Orchem D. & C. m-(4-AMINO-3-METHOXYPHENYLAZO) BENZENE SULFONIC ACID TECHNICAL: Methoxyaminoazo- benzene sodium sulfonate. Paste form; a Chemical Intermediate. Orchem D. & C. 3-AMINO-4-METHOXYTOLUENE: Sold as Cresidine Technical, a Chemical Intermediate. Orchem D. & C. 1- AMINO-2-METHOXY-4-( p-TOLYLSU LFONAMI DO) ANTHRAQUINONE TECHNICAL: Pink 3B tosylamide. Powder form; a Chemical Intermediate. Orchem D. & C. l-AMINO-2-METHYL-4-p-TOLUIDINO ANTHRA QUINONE TECHNICAL: Blue RXO Base. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 1 -AMINONAPHTH( 2,3-c) ACRIDINE-5,8,1 4( 13H)- TDIAKie TEruklir Al. i i v i v m k ikviii'iivruj O A --:-----1 n I------------------------i mv i ,4-ucn i a u u i u i i i c . Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 4 - AMINONAPHTH(2,3 - c) ACRIDINE - 5,8,14( 13H) TRIONE TECHNICAL: 5-Amino-l ,2-benzacridine. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 4-AMINO-1,6( AND 1,7) -NAPHTHALENEDISULFONIC ACID TECHNICAL: Dahl's Acid. Paste form; a Chemical Intermediate. Orchem D. & C. 6- AMINO-1,3-NAPHTHALENEDISULFONIC ACID, DISODIUM SALT TECHNICAL: Amino J Acid. Aqueous solution; a Chemical Intermediate. Orchem D. & C. 7- AMINO-l ,3-NAPHTHALENEDISULFONIC ACID, POTASSIUM SALT TECHNICAL: Amino G Acid. Powder form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-2-NAPHTHALENESULFONIC ACID: Sold as o-Naphthionic acid Technical, a Chemical Inter mediate. Orchem D. & C. 4- AMINO-l -NAPHTHALENESULFONIC ACID, SO DIUM SALT: Sold as Sodium Naphthionate Tech nical, a Chemical Intermediate. Orchem D. & C. 5- AMINO-l -NAPHTHALENESULFONIC ACID: Sold as Laurent's Acid Technical, a Chemical Intermediate. Orchem D. & C. 5-AMINO-2-NAPHTHALENESULFONIC ACID: Sold as Cleve's Acid 1,6 Technical, a Chemical Intermediate. Orchem D. & C. 5(AND 8)-AM!NO-2-NAPHTHALENESULFON!C ACID: Sold as Cleve's Acid Mixed Technical, a Chemical Intermediate. Orchem D. & C. 8- AMINO-l-NAPHTHALENESULFONIC ACID: Sold as Peri Acid Dry and Paste Technical, a Chemical Inter mediate. Orchem D. & C. 2- AMINO-4-METHYLAN1SOLE (CH30=1): Sold as Cresidine Technical, a Chemical Intermediate. Orchem D. & C. 8-AMINO-2-NAPHTHALENESULFON1C ACID, SO DIUM SALT: Sold as Cleve's Acid 1,7 Technical, a Chemical Intermediate. Orchem D. & C. DUP210011154 AMINO 7- AMINO-l,3,6-NAPHTHALENETRISULFONIC ACID, DISODIUM SALT TECHNICAL: 2R Amino Acid. Paste form: a Chemical Intermediate. Orchem D. & C. 8- AMINO-1,3,6-NAPHTHALENETRISULFONIC ACID, DISODIUM SALT: Sold as Koch Acid Technical, a Chemical Intermediate. Orchem D. & C. 4-AMINO-l,3,5-NAPHTHALENETRISULFONIC ACID, 4,5-SULTAM TRISODIUM SALT TECHNICAL- Naphthasultam. Aqueous solution; a Chemical Intermediate. Orchem D. & C. 8-AM1NO-1-NAPHTHOIC LACTAM: Sold as Naphthostyril Technical, a Chemical Intermediate. Orchem D. & C. 1-AM1NO-6-NAPHTHOL TECHNICAL: 5-Amino-2naphthol. Solid form; a Chemical Intermediate. Orchem D. & C. 1-AMINO-7-NAPHTHOL TECHNICAL: 8-Amino-2naphthol. Powder form; a Chemical Intermediate. Orchem D. & C. p-AMINOPHENOL TECHNICAL: Powder form; a Chem ical Intermediate. Orchem D. & C. Crystalline paste form,- a Chemical Intermediate. Orchem D. & C. p-( p-AMINOPHENYLAZO) BENZENESULFONIC ACID, SODIUM SALT: Sold as 4-Aminoazobenzene-4'- sulfonic acid, sodium salt Technical, a Chemical Intermediate. Orchem D. & C. 2- (p-AMINOPHENYL)-6-METHYLBENZOTHIAZOLE. Sold as Dehydrothio-p-toluidine Technical, a Chem ical Intermediate. Orchem D. & C. 2- (p-AM I NOPHENYL)-6-METHYL-7-BE NZOTHI- AZOLESULFONIC ACID: Sold os Dehydrothio-p- toluidinesulfonic acid Technical, a Chemical Inter mediate. Orchem D. & C. 2'-(p-AMINOPHENYL)-6-METHYL-2,6'-BIBENZOTHIAZOLE: Sold as Primuline Fusion Mass 220, 240 and 270 Technical, a Chemical Intermediate. Orchem D. & C. 1- AMINO-6( AND 7)-NAPHTHOL TECHNICAL: 5(and 8)-Amino-2-naphthol. Solid form; a Chemical Inter mediate. Orchem D. & C. 1-(m-AMINOPHENYL)-3-METHYL-5-PYRAZOLON E HYDROCHLORIDE TECHNICAL: Paste form, a Chemical Intermediate. Orchem D. & C. 7- AMINO-1 -NAPHTHOL-3,6-DlSULFONIC ACID, SODIUM SALT: Sold as 2R Acid Technical, a Chem ical Intermediate. Orchem D. & C. 1- (m-AMINOPHENYL)-5-OXO-2-PYRAZOLINE-3- CARBOXYLIC ACID TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. 8- AMINO-1 -NAPHTHOL-3,6-DISULFONIC ACID, SO DIUM SALT: Sold as H Acid Technical, a Chemical Intermediate. Orchem D. & C. 2- AMINOTOLUENE-5-SULFONIC ACID TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 8-AMINO-1 -NAPHTHOL-5,7-DISULFONIC ACID, SO DIUM SALT: Sold as Chicago Acid Dry and Paste Technical, a Chemical Intermediate. Orchem D. & C. 6- AMINO-1-NAPHTHOL-3-SULFONIC ACID: Sold as J Acid Dry and Paste Technical, a Chemical Inter mediate. Orchem D. & C. 7- AMINO- 1-NAPHTHOL-3-SULFONIC ACID: Sold as Gamma Acid Dry and Paste Technical, a Chemical Intermediate. Orchem D. & C. 2- AMINO-5-NITRQBENZENESULFQNIC ACID: Sold as 4-Nitroaniline-2-Sulfonic Acid Technical, a Chem ical Intermediate. Orchem D. & C. 2-AMINO-4-NITROPHENOL: Sold as 4-Nitro-2-aminophenol Technical, a Chemical Intermediate. Orchem D. & C. 4-AMINOOXANILIC ACID: Sold as N-Oxalyl-p- phenylenediamine Technical, a Chemical Inter mediate. Orchem D. & C. 2-AMINOTOLUENE-5-SULFONIC ACID, SODIUM SALT TECHNICAL: 4-Amino-m-toluenesulfonic acid, sodium salt. OTMSA (o-Toluidine-m-sulfonic acid). Powder form; a Chemical Intermediate. Orchem D. & C. 4- AMINO-M-TOLUENESULFONIC ACID, SODIUM SALT: Sold as 2-Aminotoluene-5-sulfonic acid, so dium salt Technical, a Chemical Intermediate. Orchem D. & C. 5- AMINO-o-TOLUENESULFONIC ACID TECHNICAL: p-Toluidine-o-sulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. 5-AMINO-2-( p-TOLUIDINO) BEN ZEN ESULFON 1C ACID TECHNICAL: p-Toluidine Nerol Acid. Paste form; a Chemical Intermediate. Orchem D. & C. 4-(4-AMINO-m-TOLYLAZO)-m-TOLUENESULFONIC ACID TECHNICAL: Aminoazotoluene sodium sulfon ate. Paste form; a Chemical Intermediate. Orchem D. & C. 10 DUP210011155 AMMATE-AMMUN!TSOM AMMATE WEED AND BRUSH KILLERS: See Weed and Brush Killers, page 162; Lawn and Garden Products, page 98. rials not requiring a chemically pure product. CON TAINERS: 100-lb. paper bags, 400-lb. fiber drums, tank cars and tank trucks. Explo.-C.P.S. AMMONIA, ANHYDROUS: See Anhydrous Ammonia, page 13; Fertilizers, page 64. AMMONIA LIQUORS: See Fertilizers, Krenite 10, page 64, Uramon, page 64. AMMONIUM NITRATE--U.S.P. (NIOX AMMONIUM NITRATE)--NH4N03: Crystalline or granular powder and solution. USE: In manufacture of nitrous oxide gas. CONTAINERS: 100-lb. polyethylene-lined paper bags, tank cars and tank trucks. Explo.-C.P.S. AMMONIACAL LIQUOR (AMMONIUM HYDROXIDE) -- NH4OH: Water-white liquid; 26B. at 60F. contain ing 29.4% NH3 by weight. Sp. Gr. 0.8974 at 60F. (15.6C.). USE: Manufacture of ammonium salts and other chemicals; in household ammonia and other clean ing agents; as a neutralizing agent; for pH control; in water purification; ingredient in ink and photographic developers; hydrolysis of gelatin and glue. As an emul sion stabilizer; in textile scouring, dyeing and mildew proofing; in saponifying fats and oils; in manufacture of varnishes, soap, resins, rubber and leather; in electro plating and photoengraving. CONTAINERS: Tank trucks and tank cars. Ind.&Bio.-Ind. AMMONIUM CHLORIDE--TECHNICAL (CHLORIDE OF AMMONIA, SAL AMMONIAC, MURIATE OF AMMONIA)--NH4CI: Granular and rods; soluble in water and glycerin; slightly soluble in alcohol; sublimes when strongly heated; Sp. Gr. approximately 1.53. USE: As a flux for hot dip galvanizing sheet steel and other steel products; as a flux in the electrolytic refining of zinc. CONTAINERS: 100-lb. paper bags. Ind.&Bio.-Ind. AMMONIUM SULFAMATE--NH4SOs NH2: White, crystalline, hygroscopic solid; extremely soluble in water; moderately soluble in glycerin, glycol and formamide. USE: For retarding flame in textiles and paper prod ucts (See CMTM Flame Retardant, page 42 and X-12 Flame Retardant, page 164); in electroplating solutions. CONTAINERS: 50-lb. fiber drums and 100-lb. paper bags. (See Also Weed and Brush Killers, Ammate, page 162.) Ind.&Bio.-Ind. AMMONIUM SULFATE--TECHNICAL--(NH4)2S04: White crystalline material; very soluble in water; in soluble in alcohol; decomposes at 100C. USE: As a nutrient in production of yeast; as a flame retardant for wood, textiles, etc.; for ammonia-chlorine disinfection of water; as an ingredient in cleaning compounds and electroplating solutions; in dyeing textiles and manu facture of ammonium salts; not for fertilizer use. CON TAINERS: 100-lb. paper bags. Ind.&Bio.-Ind. AMMONIUM HYDRATE: See Ammonium Hydroxide-- Reagent, page 11. AMMONIUM HYDROXIDE: See Ammoniacal Liquor, page 11. AMMONIUM HYDROXIDE--REAGENT (AQUA AM MONIA, AMMONIUM HYDRATE) -- NH,,OH: Clear, colorless solution with pungent odor; Sp. Gr. approxi mately 0.9; F. P. below -40C. ; 27-30% NH3. USE: As a reagent in chemical analysis where especially high pu rity is required. CONTAINERS: 1- and 5-pt. bottles, 6Vs - and 13-gal. carboys. Ind.&Bio.-Ind. AMMONIUM NITRATE--C. P. GRADE--NH4NQ3: Crystalline or granular powder. USE: Where a product having a minimum purity of 99.95% is required, i.e. laboratory reagents, uranium processing and as a solid fuel propellent. CONTAINERS: 100-lb. polyethylene-lined paper bags and 400-lb. polyethylene-lined fiber drums. Explo.-C.P.S. AMMONIUM NITRATE--TECHNICAL GRADE-- NH4N03: Crystalline or granular powder and solution. USE: Manufacture of explosives, paper, and other mate- n REMINGTON Paper Shotgun Shells with Kleanhore Priming Kleanbore is the original noncorrosive priming. It will not cause rust or corrosion in gun barrels. ExpressTM Shotgun Shells: G reen corrugated paper shell with Remington Crimp; 28 and 410 gauges (410 gauge in roll crimp only, not corrugated). Outstand ing heavy load, hard hitting, even pattern. Wetproof, long range. Loaded with progressive-burning powder. USE: For maximum long range game shooting. Rem. Arms. Target Loads: Green corrugated paper shell; 12, 16 and 20 gauges. USE: For trap and skeet shooting. Rem. Arms. Plastic Shotgun Shells with Kleanbore Priming ExpressTM Shotgun Shells: Green corrugated plastic shell; 12, 16 and 20 gauges. Fast, powerful patterns. Weatherproof body. High base wad. Guaranteed to chamber under all weather conditions. Also in stand- DUP210011156 AMMUNITION AMMUNITION (Cont.) ard lengths (2% -in.) and 3-in. Magnum. USE: For maximum long range hunting. Rem. Arms. ExpressTM Buckshot Loads: Green corrugated plastic shell; 12 and 16 gauges. USE: For deer, black bear, wolf; also guard and police duty. Rem. Arms. ExpressTM Slugs--Rifled: Green corrugated plastic shell; 12, 16 and 20 gauges. Increased velocity, great striking energy, long range. Improved bullet-type shape, external rifling and hollow base cause slug to travel with fine accuracy. USE: For deer, bear and other big game. Rem. Arms. Shur Shot Shotgun Shells: Red plastic shell; 12, 16 and 20 gauges. High quality, smokeless powder. USE: For medium range; minimum recoil. Rem. Arms. Shur Shot Scatter Loads: Red plastic shell; 12, 16 and 20 gauges. Smokeless powder. Shot divided into cells by wads between layers to give open patterns with chokeboredshotguns.USE: For short range. . Rem. Arms. Target Loads: Green plastic shell; 12, 16 and 20 gauges. For trap and skeet shooting. Power PistonTM wad column. Rem. Arms. Rim Fire 22 CaliberCartridges with Kleanbore Priming Hi-SpeedTM Cartridges--22 Caliber Rim Fire: Fine accuracy, long range, greater energy, higher velocity than standard velocity 22's. USE: For small game and pest shooting. Rem. Arms. Remington Match 22 Caliber Rim Fire Cartridges: Long rifle ammunition. Unexcelled for accuracy. USE: For match rifle and match pistol shooting. Rem. Arms. Spatter-LessTM Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Non-toxic; pulverizes on impact. USE: For gallery shooting. Rem. Arms. Standard Velocity 22 Caliber Rim Fire Cartridges: For the shooter who prefers regular speed ammunition. USE: For hunting small game or target shooting. Rem. Arms. Remington Blank and Shot Cartridges Made in assorted rim fire and center fire calibers for rifles, revolvers and pistols, also 10 gauge blank shells for starting yacht races. Blank cartridges used for athletic events. Shot cartridges used for small game and in miniature trap and skeet shooting. Kleanbore priming. Rem. Arms. Remington Center Fire Rifle Cartridges Calibers for all hunting purposes. Kleanbore prim ing does not cause rust and corrosion. Special pro gressive-burning powder gives high velocities. Famous for high accuracy. USE: For medium and big game hunting and target shooting. Rem. Arms. Hi-SpeedTM Cartridges--Center Fire Rifle: Avail able in a wide variety of center fire calibers. USE: For medium and big game hunting. Rem. Arms. ExpressTM Cartridges--Center Fire Rifle: Available in a wide variety of center fire calibers. USE: For medium and big game hunting. Rem. Arms. Remington Center Fire Rifle Cartridges with Corelokt Bullets: Cartridges in big game calibers. The Core-Lokt bullet provides maximum expansion, minimum disintegration and unexcelled knockdown power. Us e: For hunting big game. Rem. Arms. Remington Piston and Revolver Cartridges Cartridges in all standard calibers. Protected by a special oilproof process against effects of oil used for lubrication. Will retain initial energy whether in chamber or magazine. Powerful, accurate, penetrat ing. Noncorrosive Kleanbore priming. USE: For police, hunting and target purposes. Rem. Arms. Hi-Way Master Cartridges--Center Fire--Pistoi and Revolver: Available in 38 Special and 45 Auto matic calibers. Distinguished by metal cased, metal penetrating bullet. USE: Law enforcement. Rem. Arms. Targetmaster Cartridges--Center Fire--Pistol and Revolver: Available in several center fire cali bers. Distinguished by wad cutter bullet, except for 38 Special round nose. USE: For pistol and revolver target shooting. Rem. Arms. PETERS AMMUNITION Paper Shotgun Shells with Kleanbore priming Peters High VelocityTM Shells--Shotgun: Blue color; Peters Flat-top Crimp; 28 and 410 gauges (410 gauge in roll crimp only). Loaded with progressive-burning powder. Thoroughly waterproof. Extra speed, uni form pattern, long range power. 410 gauge in stand ard length (2V2 -in.) and extra length (3-in.) shells. USE: For maximum long range game shooting. Rem. Arms. High VelocityTM Slugs--Rifled: 28 and 410 gauges. USE: Shells loaded with rifled slugs are used prin cipally on deer and bear in states where rifles are prohibited. Rem. Arms. DUP210011157 AMMUNITION-ANHYDROUS AMMUNITION (Cont.) Target Loads: Blue color; 12, 16 and 20 gauges. USE: For skeet and trapshooting. Rem. Arms. Standard Velocity Cartridges--22 Caliber Rim Fire: Standard velocity cartridges designed for fine accuracy. USE: For rifle and pistol target shooting. Rem. Arms. Victor Shotgun Shells: Dark red color; 12, 16 and 20 gauges with the Peters Crimp. A quality shotgun shell at a popular price. USE: For field shooting. Rem. Arms. Peters Oil-Tite Cartridges--Center Fire Rifle with Kleanbore Priming Cartridges loaded with bullets best adapted for their Victor Spreader Loads: 12, 16 and 20 gauges. Shot is separated into cells by wads between layers of respective uses and manufactured in all standard calibers. Highest velocity and positive ignition. shot to secure open patterns. USE: For thicket or close range shooting. Rem. Arms. Powder and primer protected against deterioration through oil seepage and moisture by special process. USE: For medium and big game hunting and target Plastic Shotgun Shells with Kleanbore Priming shooting. Rem. Arms. Peters High VelocityTM Plastic Shells--Shotgun: Blue color; polyethylene body; strong metal head; Rib-Lokt Crimp; 12, 16 and 20 gauges. Loaded with High VelocityTM Cartridges--Center Fire Rifle: Available in a wide variety of center fire calibers. USE: For medium and big game hunting. Rem. Arms. progressive-burning powder. Thoroughly water Peters Center Fire Rifle Cartridges with Core-Lokt proof. Extra long range power, better patterns. Also Bullets: Made in selected big game rifle calibers. in standard lengths (2% -in.) Magnum and extra Provide maximum uniform expansion with minimum length (3-in.) Magnum shells. USE: For maximum disintegration and tremendous knockdown power. range game shooting. Rem.Arms. USE: For all North American big game. Rem. Arms. Peters High VelocityTM Plastic Shell Buckshot Peters, Oil-Tite Cartridges--Pistol and Revolver Loads: 12, 16 and 20 gauges. USE: For large game with Kleanbore Priming and police duty. Rem.Arms. Cartridges in all standard calibers. Oil-Tite for Peters High VelocityTM Plastic Shell Slugs--Rifled: protection against oil in chamber or magazine. 12, 16 and 20 gauges. USE: Shells loaded with rifled Famous for target shooting. Powerful, accurate, pene slugs are used principally on deer and bear in states trating. Non-corrosive Kleanbore priming. USE: where rifles are prohibited. Rem.Arms. For police, hunting and target shooting. Rem. Arms. Peters Rim Fire 22 Caliber Cartridges with Kleanbore Priming Peters Match 22 Caliber Rim Fire Cartridges: Long rifle cartridges loaded with smokeless powder to standard velocities and designed especially for super fine accuracy. USE: Particularly recommended for rifle and pistol target shooting. Rem. Arms. High VelocityTM Cartridges--22 Caliber Rim Fire: Developed tor long range and great penetrating power. USE: For small game and pest shooting. Rem. Arms. Highway Patrol Cartridges--Center Fire--Pistol and Revolver: Available in 38 Special and 45 Auto matic calibers. Distinguished by metal cased, metal penetrating bullet. USE: Law enforcement. Rem. Arms. Peters Blank Cartridges: Made in rim fire and center fire calibers for rifles, revolvers and pistols. Blank cartridges used largely for athletic events, theater productions and sound effects. Rem. Arms. ANALYZER, DIFFERENTIAL THERMAL: See Instruments, page 95. ANALYZER, PHOTOMETRIC: See Instruments, page 95. High VelocityTM Cartridges--22 Caliber Rim Fire -- Shot: Long rifle shot cartridges loaded with No. 12 shot. USE: For small game, miniature skeet and trap shooting. Rem. Arms. Krumble Ball Cartridges--New and Improved 22 Caliber Rim Fire--Gallery: Special composition bullet. Nontoxic; pulverizes on impact. USE: For gallery shooting. Rem. Arms. ANATASE: See Titanium Dioxide Pigments, page 153. ANHYDROUS AMMONIA, COMMERCIAL AND RE FRIGERATION GRADES--NH3: Liquefied gas, shipped and stored underpressure; contains not less than 99.8% NH3. USE: Industrial explosives; as an intermediate for amines, amides, nitriles, nitrates, nitrites, ammonium salts, insecticides, fungicides and dyestuffs; source of hydrogen for hydrogenation of fats and oils; general 13 DUP210011158 ANHYDRGUS-ANTHRIMIDE neutralizing agent and ingredient in household cleaning specialties; refrigerant, metallurgy. CONTAINERS: Tank cars. (See also Fertilizers, Anhydrous Ammonia, page 64.) ' Ind.&Bio.-lnd. ANILINE--C6H5NH2: Pale yellow, oily liquid. USE: dyes, intermediates, paints and varnishes. CONTAINERS: 55-gal. nonreturnable metal drums (450-lb.), tank cars and tank trucks. Explo.-C.P.S. ANILINE-2,5-DISULFONIC ACID TECHNICAL: 2- AmiftO-p-bencenedisulTonic acid. Paste form; a Chemical Intermediate. OrcHem D. & C. 1-ANILINO-4-HYDROXYANTHRAQUINONE TECH NICAL: Paste form; a Chemical Intermediate. Orehem D. & C. 8-ANILINO-l-NAPHTHALENESULFONIC ACID, AM MONIUM SALT. Sold as N-Phenyl Peri Acid Technical. A Chemical Intermediate. Orehem D. & C. 6- ANILINO-l -NAPHTHOL-3-SULFON1C ACID. Sold as N-Phenyl J Acid Technical. A Chemical Intermediate. Orehem D. & C. 7- ANILINO-1-NAPHTHOL-3-SULFONIC ACID. Sold as N-Phenyl Gamma Acid Dry and Paste Technical. A Chemical Intermediate. Orehem D. & C. p-ANILINOPHENOL TECHNICAL: p-Hydroxydiphenylamine. Paste form; a Chemical Intermediate. Orehem D. & C. ANIMAL REPELLENTS: See Seed Treatments, Arasan 42-S, page 7 38. o-ANISIDINE TECHNICAL: o-Methoxyaniline. Liquid form; a Chemical Intermediate. Orehem D. & C. o-ANISIDINE S TECHNICAL: o-Aminoanisole. Liquid form,- a Chemical Intermediate. Orehem D. & C. p-ANISIDINE TECHNICAL: p-Methoxyaniline, p-Aminoanisole. Cast solid form; a Chemical Intermediate. Orehem D. & C. ANTHRAFLAVIC ACID TECHNICAL: 2,6-Dihydroxyanthraquinone. Solid form; a Chemical Intermediate. Orehem D. & C. ANTHRANILIC ACID TECHNICAL: o-Aminobenzok acid. Powder form; a Chemical Intermediate. Orehem D. & C. ANTHRA( 1,9)PYRAZOL-6( 2H)-ONE TECHNICAL: Pyrazolanthrone. Crystalline powder form; a Chem ical Intermediate. Orehem D. & C. 1.5-ANTHRAQUINONEDISULFONIC ACID, DISO DIUM SALT TECHNICAL: Crystalline solid form,- a Chemical Intermediate. Orehem D. & C. 1,8-ANTHRAQUINONEDISULFONIC ACID, DISO DIUM SALT TECHNICAL: Solid form; a Chemical Intermediate. Orehem D. & C. 2.6- ANTHRAQUINONEDISULFONJC ACID, DISO DIUM SALT TECHNICAL: Powder form; a Chem ical Intermediate. Orehem D. & C. 1- ANTHRAQUINONESULFON1C ACID, SODIUM SALT TECHNICAL: Powder form; a Chemical Inter mediate. Orehem D. & C. 2- ANTHRAQUINONESULFONIC ACID, SODIUM SALT DRY GROUND TECHNICAL: Silver Salt. Powder form; a Chemical Intermediate. Orehem D. & C. N,N'-1,5-ANTHRAQUINONYLENEDl ANTHRANILIC ACID TECHNICAL: Violet BN Acid Anthraquinone. Amorphous solid form; a Chemical Intermediate. Orehem D. & C. 1,1'-(1,5-ANTHRAQUINONYLENEDIIMINQ) Dl- NAPHTH(2,3-c) ACRIDINE-5,8,1 4( 13H)-TRIONE TECHNICAL: Anthrimide for Brown VR. Solid form; a Chemical Intermediate. Orehem D. & C. (1 -ANTHRAQUINONYL)-! ,2-HYDRAZI NED I SUL FONIC ACID, DISODIUM SALT TECHNICAL: Crystalline paste form; a Chemical Intermediate. Orehem D. & C. o-ANISIDINOMETHANESULFONIC ACID, SODIUM SALT TECHNICAL: Methoxy omega sulfonic acid. Paste form; a Chemical Intermediate. Orehem D. & C. ANISOLE--TECHNICAL (PHENYL METHYL ETHER) -- C6H5OCH3: A clear mobile liquid with a light ethereal odor, insoluble in water, soluble in alcohol and ether. B.P. 153.8 C.; F. P. --37.3C. USE: As a chemical inter mediate in alkylation, acylation, halogenation and nitra tion reactions; as a solvent reaction medium; as a heat transfer medium. Anisole has high heat stability, high flash point, low vapor pressure and low order of toxicity. CONTAINERS: 5- and 55-gal. drums, tank cars and tank trucks- Ind.&Bio.-lnd. ANTHRARUFIN TECHNICAL: 1,5-Dihydroxyanthraquinone. Powder form; a Chemical Intermediate. Orehem D. & C. ANTHRIMIDE FOR BROWN AR: Sold as 4,5*-Dibenz- amido-lj'-iminodianthraquinone Technical, a Chem ical Intermediate. Orehem D. & C. ANTHRIMIDE FOR BROWN RBT: Sold as 1,4-Bis(l- anthraquinonylamino)anthraquinone Technical, a Chemical Intermediate. Orehem D. & C. ANTHRIMIDE FOR BROWN VR: Sold as 1,T-(1,5- Anthraquinonylenediimino)dinophth-(2,3-c) a cri- dine-5,8,14(13H)-trione Technical, a Chemical Inter mediate. Orehem D. & C. 14 DUP210011159 ANTHRIMIDE-ANTlQXiDANTS ANTHRIMIDE FOR GRAY R: Sold as l-(3-Methyl-2- ' anthraquino ny Iamino)-5-(7-oxo-7H-benz(de) anthracen-3-ylamino) anthraquinone Technical, a Chemical Intermediate. Orehem D. & C. ANTHRAMIDE FOR GREEN 2BL: Sold as l-(7-Oxo-7H- benz(de)anthracen-3-ylamino) anthraquinone Tech nical, a Chemical Intermediate. Orehem D. & C. ANTHRIMIDE FOR OLIVET OR TR: Sold as l,l'-(7-Oxo- 7H-benz(de)anthracen-3,9-ylenediimino)dianth ra- quinone Technical, a Chemical Intermediate. Orehem D. & C. ANTHRIMIDE FOR RED BROWN RB: Sold as 4-(4- Benzamido-l-anthraquinonylamino)naphth(2,3-c)- acridine-5,8,14(13H)-trione Technical, a Chemical Intermediate. Orehem D. & C. ANTHRIMIDE FOR YELLOW 3R: Sold as 1,5-Bis(l- anthraquinonylamino)anthraquinone Technical, a Chemical Intermediate. Orehem D. & C. ANTICHLOR: See Sodium Thiosulfate, page 144. ANTIFOAM AGENT, PETROLEUM: See Petroleum Chemicals, Antifoam Agent, Petroleum, page 111. ANTIFOAM AGENTS: See Ocenol, page 109; Loro/ 20, page 99; Loro/ 22, page 100. ANTIFREEZE PRODUCTS: Commercial Methanol Antifreeze (C.M.A.): A methanol base product with chemical rust and corro sion inhibitor. Has good heat transfer properties. Recommended for protection to -- 30F. in vehicles with standard (160F.) opening thermostats. Con tainers: 55-gal. drums, 4,000 gal. minimum tank cars and tank transports. F.&F.-Cons. Telar Antifreeze and Summer Coolant: A concen trated ethylene glycol-base product with special rust inhibitors that protect all cooling system metals, includ ing aluminum, against rust and corrosion in winter and summer. It can be mixed with any potable water and does not need to be drained from a properly operat ing cooling system as long as the coolant remains red. When the color changes from red to yellow, it is an indication that the rust and corrosion inhibitors are depleted. The solution should be discarded and a fresh fill installed. Recommended for use in all liquid cooled internal combustion engines. Containers: Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case) and 54-gal. drums. F.&F.-Cons. Zerex Anti-Rust Antifreeze: A concentrated ethyl ene glycol-base product made to a special Du Pont formula. It contains MR-8, a special chemical rust inhibitor that gives excellent protection to all metals, including aluminum, found in the cooling system. It will prevent rust and corrosion in the cooling system for one year. It is nonevaporating and nonfoaming. Recommended for all types of liquid cooled internal combustion engines where one year's use is desired. CONTAINERS: Qt. and gal. tamperproof cans (24 oneqt. or 6 one-gal. cans in a case) and 54-gal. drums. F.&F.-Cons. Zerone Anti-Rust Antifreeze: A methanol-base product designed to give effective and economical fill CCiC I ICt-lIVI I W14ICU U U I Ul 1IV I it s ; cooling systems. It also contains special rust inhibitors. Zerone is a very effective antifreeze that requires about 25% less product to protect to a given tempera ture than the same quantity of ethyl alcohol or ethyl ene glycol. Recommended for use with normal-operat ing thermostats (below 160F.). CONTAINERS: Qt. and gal. tamperproof cans (24 one-qt. or 6 one-gal. cans in a case) and 54-gal. drums. F.&F.-Cons. ANTIFUME S SOLUTION: A durable protective agent against atmospheric fading of dyed acetate. Orehem D. & C. ANTIKNOCK COMPOUNDS: See Petroleum Chemicals, Antiknock Compounds, page 111. ANTIOXIDANTS, PETROLEUM: See Petroleum Chem icals, Antioxidants, Petroleum, page 112. ANTIOXIDANTS FOR NATURAL AND SYNTHETIC RUBBER: Akrcflex C Rubber Antioxidant: 35% diphenyl- para-phenylene-diamine-C6H4(NHC6H5)2 and 65% phenyl-alpha-naphthylamine (See Neozone A, be low). Dark gray, waxy pellets; Sp. Gr. 1.20; F. P. not lower than 75C. USE: to improve the aging and service life of natural and synthetic rubbers; anti crosslinking agent for SBR (styrene butadiene rubber). CONTAINERS: 250-lb. drums. Elastomers Akroflex CD Rubber Antioxidant: 35% diphenyl- para-phenylene-diamine C6H4(NHC4H5)2 and 65% phenyl-beta-naphthylamine (See Neozone D, below). Dark gray pellets; Sp. Gr. 1.22. USE: To improve the aging and service life of natural and synthetic rubber. CONTAINERS: 250-lb. drums. Elastomers Antox Rubber Antioxidant: Condensation product of butyraldehyde-aniline. Amber liquid; Sp. Gr. 1.04. USE: To improve the aging and service life of natural and synthetic rubber. CONTAINERS: 275-lb. drums. Elastomers Neozone A Rubber Antioxidant: Phenyl-alphanaphthylamine-C10H7NHC6H5. Yellow pellets which turn dark purple on exposure to air or light; Sp. Gr. 1.21; F. P. not lower than 50C. USE: To improve the 15 DUP210011160 ANTIOXIDANTS-ARMS ANTIOXIDANTS (Cont.) aging and service life of natural and synthetic rubber. CONTAINERS: 300-lb. drums. Elastomers Neozone C Rubber Antioxidant: A complete fusion of Neozone A (see above) and toluene-2,4-diamine. Tan pellets which turn dark gray and have a shiny surface on standing; Sp. Gr. 1.21., F. P. not lower than 45C. USE: to improve the aging and heat re sistance of natural and synthetic rubber. CONTAINERS: 250-lb. drums. Elastomers Neozone D Rubber Antioxidant: Phenyl-beta- naphthylamine-C)0H7NHC6H5. Fine light gray powder; Sp. Gr. 1.24; F. P. not lower than 106C. USE: To improve the aging and service life of natural and synthetic rubber; stabilizer in manufacture of SBR. CONTAINERS: 160-lb. drums. Elastomers Thermoflex A Rubber Antioxidant: 25% di-para- methoxydiphenylamine-(CH3OC6H5)2NH, 25% di- phenyl-para-phenylenediamine-C6H4(NHC6H5)2 and 50% phenyl-beta-naphthy[amine-C10H7NHC6H5. Dark gray pellets; Sp. Gr. 1.22; F. P. not lower than 67C. USE: To promote outstanding heat aging and flex life of natural and synthetic rubber. CONTAINERS: 250-lb. drums. Elastomers Zalba Special Rubber Antioxidant: A fortified hin dered phenol, yellow cream-colored powder; Sp. Gr. 1.30. USE: to improve the aging and service life of natural and synthetic rubber; excellent nondiscoloring antioxidant for natural and synthetic rubber and latex; a stabilizer for the manufacture of SBR. CON TAINERS: 100-lb. drums. Elastomers AQUAREX WETTING AGENT: See Wetting Agents for Natural and Synthetic Rubber, page 163. ARASAN THIRAM SEED PROTECTANT: See Seed Treatments, page 738. ARIDEX RENEWABLE WATER REPELLENTS: For application to textile fabrics to make them water repellent. Orchem D. & C. ARLTON COMBS: See Combs and Brushes, page 44. ARLTON TOOTHBRUSHES: See Toothbrushes, page 158. ARMALON TFE-FLUOROCARBON COATED FABRICS: See Coated Fabrics, page 43. IARMS GLASS Remington Rifles and Pistols Model 600 Bolt Action Carbine Big Game Rifle: Fast handling, powerful, accurate lightweight carbine. An ideal rifle for hunting in heavy brush country. Available in 35 Rem., 308 Win., 6 M/M Rem., and 222 Rem. calibers. USE: Deer hunting and varmint shooting. Rem. Arms. Model 700 Bolt Action Big Game Rifle: Custom feature high power rifle made in 222 Remington, 222 Remington Magnum, 6 M/M Rem., 243 Win., 264 Win. Mag., 7 M/M Remington Magnum, 270 Win., 280 Remington, 30-06, 308 Win., 300 Win. Mag., 375 H & H Mag., and 458 Win. Mag. calibers. USE: For medium and big game hunting. Rem. Arms. ANTI-RUST AND WATER PUMP LUBRICANT: See Automotive Specialties 7 Products, page 78. ANTI-SOIL CONCENTRATES: See Ludox Colloidal Silica, page 100. ANTISTATIC AGENTS: See Avitex, page 21; Duponol G, page 52; Zelec, page 164. ANTI-WRINKLE & FORCE-DRY AGENT: See Finishes, Refinish, page 72. ANTOX RUBBER ANTIOXIDANT: See Antioxidants for Natural and Synthetic Rubber, page 15. ANTRON NYLON: See Fibers, Synthetic, page 65. APHID AND MITE SPRAY: See Lawn and Garden Products, page 97. APPLIANCE FINISHES: See Finishes, Refinish, Re frigerator Finishes, page 73. AQUA FORTIS: See Acids, Nitric Acid, page 4. Model XP-100 Bolt Action, Single Shot Center Fire Long Range Pistol: Stock made of Zytel nylon. Weighs only 3% lbs. Extremely accurate, long range varmint pistol. Chambered for 221 Remington Fire Ball cartridge. Rem. Arms. Woodsmaster Model 742 Automatic Big Game Rifle: Power-Matic gas-operated rifle, hammerless; solid breech; 6 M/M Rem., 280 Remington, 30-06 Springfield and 308 Winchester calibers; also avail able in carbine model in 308 Winchester and 30-06; 5-shot capacity. USE: For medium and big game hunting. Rem. Arms. Gamemaster Model 760 Slide Action Big Game Rifle: High powered slide action; hammerless; solid breech; made in 223 Rem; 308 Winchester, 30-06 Springfield, 270 Winchester, 35 Remington, 280 Rem ington calibers; 5-shot capacity; also available in carbine model in 308 Winchester, 35 Rem. and 30-06; 5-shot capacity. USE: For medium and big game hunting. Rem. Arms. 16 DUP210011161 ARMS ARMS (Cont.) Model 550--22 Caliber Automatic Rifle: Cham bered for short, long or long rifle cartridges, without adjustment; magazine holds 22 short, 17 long or 15 long rifle cartridges. USE: For small game hunting and shooting galleries. Rem. Arms. Model 51IX--22 Caliber Bolt Action Clip Maga zine Repeater: Magazine holds 6 short, long or long rifle cartridges. Has double cocking cams, double locking lugs, double extractors and side lever thumb safety. USE: For small game hunting and informal target shooting. Rem. Arms. Speedmaster Model 552--22 Caliber Automatic Rifle: Chambered for short, long and long rifle cartridges, without adjustment; magazine holds 20 short, 17 long or 15 long rifle cartridges. USE: For small game hunting and shooting galleries. Rem. Arms. Model 512X--22 Caliber Bolt Action Tubular Magazine Repeater: Magazine holds 14 long rifle, 16 long or 21 short cartridges. Has double cocking cams, doobie locking lugs, double extractors and side lever thumb safety. USE: For small game hunting and informal target shooting. Rem. Arms. Fieldmaster Model 572--22 Caliber Slide Action Rifle: Takedown; hammerless; solid breech; slide ac tion; 23-in. barrel; chambered for short, long and long rifle cartridges, without adjustment; magazine holds 20 short, 17 long or 15 long rifle regular or higher Matchmasfer Model 513T--22 Caliber Bolt Ac tion Target Rifle: 7-shot capacity; completely equipped with target sights, target stock, adjustable front swivel and precision sights; moderately priced. USE: For fine target shooting. Rem. Arms. speed cartridges. Also available in smooth bore model for 22 shot cartridges. USE: For small game hunting and informal shooting. Rem. Arms. Model 514--22 Caliber Bolt Action Single Shot Rifle: American Walnut stock. Shoots short, long and long rifle cartridges. 24-inch barrel, crowned at Nylon 10--22 Caliber Bolt Action Rifle: Single shot, structural Zytel nylon and ordnance steel con muzzle, side lever thumb safety. An excellent rifle at a popular price. Rem. Arms. struction. Chambered for short, long and long rifle Rangemaster Model 40XB--Rim Fire and Center cartridges. USE: For small game and informal target Fire Bolt Action Target Rifle: Available in 22 rim fire shooting. Rem.Arms. and 222 Remington, 222 Remington Magnum, Nylon 1 1--22 Caliber Bolt Action Rifle: Structural 7.62 mm, 30-06 and other center fire calibers on Zytel nylon and ordnance stee! construction. Box special order. Heavy and standard barrels, target magazine repeater; magazine capacity six short, long stock, adjustable trigger, built in bedding device. or long rifle cartridges. USE: For small game and in USE: For supremely accurate target shooting. formal target shooting. Rem.Arms. Rem. Arms. Nylon 12--22 Caliber Bolt Action Rifle: Structural Model 521 T--22 Caliber Bolt Action Combination Zytel nylon and ordnance steel construction. Tubular Target and Hunting Rifle: Clip magazine holds 6 magazine repeater. Holds 22 short, 17 long or 15 short, long or long rifle cartridges. Remove target long rifle cartridges. USE: For small game and in aperture from micrometer rear sight and it becomes a formal target shooting. Rem.Arms. hunting rifle with peep sight. 25-inch round tapered barrel with crowned muzzle. Patridge type front Nylon 66--22 Caliber Automatic Rif) e: Structural sight; micrometer rear sight with 'A -minute clicks. USE: Zytel nylon and ordnance steel construction. Custom Small game hunting and target shooting. features include checkered grip and fore-end, pistol Rem. Arms. grip. Holds 15 long rifle cartridges. USE: For small game hunting and informal target shooting. Rem. Arms. International Free Rifle Rim Fire and Center Fire Bolt Action Target Rifle: Available in 22 rim fire and 222 Remington, 222 Remington Magnum, 7.62 mm, Trail RiderTM Nylon 76--22 Caliber Lever Action 30-06 and others on special order. USE: For target Rifle: Structural Zytel nylon and ordnance steel con shooting in free rifle competition. Rem. Arms. struction. Extra-fast lever action. Custom features include thumb safety, adjustable rear sight. 15 long rifle cartridge capacity. USE: For small game hunting and informal target shooting. Rem. Arms. Matchmaster Model 513T--22 Caliber Bolt Ac tion Target Rifl e: 7-shot capacity; completely equipped with target sights, target stock, adjustable front swivel and precision sights; moderately priced. Model 51 OX--22 Caliber Bolt Action Single Shot USE: For fine target shooting. Rem. Arms. Rifle: Shoots short, long and long rifle cartridges. American walnut stock. Has 24-in. barrel, adjustable Remington Shotguns rear sight, automatic safety. USE: For small game hunting and informal target shooting. Rem. Arms. Model 1100 Automatic Shotgun: 5-shot, 12, 16, and 20 gauges. 3-shot plug supplied free. Gas oper- 17 DUP210011162 ARMS-AUTOMOTIVE ARMS (Cont.) ation reduces recoil os much as 40% over other auto matics and prolongs shooting life up to 7 times. USE: For upland game and waterfowl hunting; skeet and trapshooting. Rem. Arms. Model 11-48 Automatic Shotgun: 5-shot; 12, 16 and 20 gauges (4-shot in 28 and 410 gauges). 3-shot plug supplied without cost. USE: For upland game. Wingmaster Model 870 Pump Action Shotgun: 5-shot; 12, 16 and 20 gauges; takedown; hammerless; solid breech. 3-shot wooden plug furnished in all gauges. USE: For skeet, trap, upland game and water fowl shooting. Also available in riot gun model for law enforcement use. Rem. Arms. ARTIC METHYL CHLORIDE: See Methyl Chloride, page 103. ARYLIDE RED PIGMENTS: See Pigment Colors, page 124. ASA AZOLONE: Sold as 5-Amino-/-(2,3-dihydro-2-oxo- 5-benzimidazolylamino)benzenesulfonic acid Tech nical, a Chemical Intermediate. Orchem D. & C. AURICTM BROWN: See Pigment Colors, page 124. AUTOMOTIVE CLEANERS: See Automotive Specialties 7 Products, below. AUTOMOTIVE FINISHES: See Finishes, Automotive, page 68; Finishes, Refmish, page 71. AUTOMOTIVE PAINTS: See Finishes, Automotive, page 68; Finishes, Refmish, page 71. AUTOMOTIVE POLISHES: See Automotive Specialties 7 Products, directly below. AUTOMOTIVE REFINISHING MATERIALS: See Fin ishes, Refmish, page 71. AUTOMOTIVE SPECIALTIES 7 PRODUCTS: Lubricates water pump--eliminates squeaks. Works in plain water or any standard antifreeze solutions. Harmless to cooling system parts. Just pour liquid into radiator. One can is sufficient for a cooling system holding 22 quarts or less. Recommended for passen ger cars, trucks, tractors, buses. CONTAINERS: 12-oz. cans. F.&F.-Cons.(Spec.) Auto Upholstery Cieaner: A foam-type cleaner for car upholstery--fabric, leather, vinyl and other plas tics. Excellent for removing spots from household up holstery, textiles and rugs. Removes grime and dirt, brightens and restores appearance. CONTAINERS: 15-oz. aerosol cans. F.&F.-Cons.(Spec.) Brake Fluid, Heavy Duty: A very high quality brake fluid that meets or exceeds rigid S.A.E. Specification 70R1, S.A.E. Specification J70B as required by the new Federal Brake Fluid Law, and Federal Specifica tion VV-H-910a. USE: In all automotive hydraulic brake systems under severe or moderate operating conditions. CONTAINERS: 12-oz., 1 -qt., 1- and 5-gal. cans, 30- and 54-gal. drums. F.&F.-Cons.(Spec.) Brake Fluid, Super Heavy Duty: A super-heavy duty brake fluid that meets or exceeds rigid S.A.E. Specifi cations 70R3 and 70R1, S.A.E. Specification J70B as required by the new Federal Brake Fluid Law, and Federal Specification VV-H-910a. USE: In all auto motive hydraulic brake systems under severe operat ing conditions. CONTAINERS: 12-oz., 1 -qt., 1- and 5-gal. cans, 30- and 54-gal. drums. F.&F.-Cons.(Spee.) Car Wash: A soapless detergent which, when dis solved in water, makes car washing easy. Removes dirt and grease quickly and safely. Makes drying un necessary. Easy on the hands and car finish. CON TAINERS: 16 -oz., 16 -, 4-, 16- and 60-lb. bags. F.&F.-Cons.(Spec.) Cellulose Sponge: See Sponge, Cellulose, page 144. Chrome Polish: A speedy cleaner, polish and rust re mover for chrome-plated bumpers and other auto fit tings. Polishes nickel, brass, copper, stainless steel and aluminum. Produces a brilliant luster. Also recom mended for home and shop uses. CONTAINERS: 12-oz. cans. F.&F.-Cons.(Spec.) Acid and Rust Inhibitor: A patented, economical chemical inhibitor for automotive cooling systems to help keep them rust free. It dissolves quickly, prevents rust from forming and neutralizes acids. Not recom mended for systems with aluminum components. Mixes readily with all standard type antifreezes. CON TAINERS: 8'h -oz. cans. F.&F.-Cons.(Spec.) Anti-Rust and Water Pump Lubricant (Liquid): Helps prevent electrolytic corrosion in cooling systems. Clear Windshield Sealer: A clear, waterproof ce ment for stopping leaks at windshields and rear window frames. Dries quickly and adheres firmly to glass, metal and rubber, making a tight, permanent, waterproof seal. CONTAINERS: 1 % -f). oz. tubes. F.&F.-Cons.(Spec.) Cooling System Cleanser: A heavy duty, acid type cleanser which cleans badly clogged radiators by actually dissolving rust, scale and grease without in- 18 DUP210011163 AUTOMOTIVE AUTOMOTIVE SPECIALTIES (Cont.) jury to hose packings or gaskets. Does not require reverse flushing. CONTAINERS: 1-lb. cans. F.&F.-Cons.(Spec.) Cooling System Sealer: Stops and prevents leaks in automotive radiators and cooling systems quickly, without clogging the passages. Harmless to hose and metal parts. Mixes readily with all standard types of antifreeze. CONTAINERS: 12-oz. cans. F.&F.-Cons.(Spec.) Dissolvo (Solvent) Tar and Road Oil Remover: A safe solvent for removing tar, road oil, old wax, spray glaze and silicone automobile polishes. Safe for all automobile finishes. CONTAINERS: 12-oz. and 1-gal. cans. . F.&F.-Cons.(Spec.) Daco Cement: See Cements, Duco, page 26. Engine Cleaner and Degreaser: Fast, effective spray-on for "do-it-yourself" engine cleaning. Dis solves grease, oil and grime from engine and acces sories. Rinses clean with water. Cleans engines and lawn mowers; removes grease from garage floors. Harmless to painted finishes and ignition wiring. CON TAINERS: 16-oz. aerosol cans, 1-gal. and 5-gal. cans. F.&F.-Cons.( Spec.) Fast Flush: A maintenance-type liquid radiator cleaner designed for routine use in spring and fall to maintain maximum cooling system efficiency. Safely disperses grease, rust and scale in 10 to 30 minutes. Requires no neutralizer, just flushing with water. Will not harm rubber or metal cooling system parts. CON TAINERS: 1-pt. cans. F.&F.-Cons.(Spec.) Foam Cleaner: A liquid concentrate, to be diluted with water and the foam used for cleaning carpets, rugs and upholstery. Cleans both flat weave and pile fabrics. Gives them a fresh, new look. Is safe and easy to use. The diluted liquid is also an excellent paint and woodwork cleaner. CONTAINERS: 1-pt. cans. F.&F.-Cons.(Spec.) Gas Guard: A premium grade fuel system antifreeze which prevents ice forming in the gasoline lines of cars, trucks, tractors and diesel equipment. New ex clusive aviation fuel additive prevents carburetor's icing and stalling. Absorbs condensed moisture in fuel systems, helps prevent ice formation in gas lines. Contributes to quick starting, smooth engine per formance, even in subzero weather. One 12-oz. can every 1000 miles will give adequate protection. CON TAINERS: 12-oz. cans. F.&F.-Cons.(Spec.) Glass and All-Purpose Cleaner: An economical, con centrated cleaning fluid that cuts grease and grime efficiently and safely. Cleans vinyl automobile up holstery, windshields, walls, woodwork, gas pumps, soft drink coolers and other glass, metal or painted surfaces. Will not smear, leaves no film, economical to use. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Cons.( Spec.) Glow Liquid CarWash: For those who prefer a liquid car wash. Removes dirt, oil, grease, but not existing wax on finish. Will not streak, dries without wiping. CONTAINERS: 12-oz. and 1-gal. cans. F.&F.-Cons.(Spec.) Golden 7 Engine Conditioner: A heavy-bodied, transparent, liquid additive for automotive crankcases. It thickens oil films, reducing "blow-by" of combustion gases into crankcase, and thus seals in power and re duces oil consumption. Reduces wear, prolongs engine life, quiets noisy parts, improves compression and lu brication. CONTAINERS: 15-oz. cans. F.&F.-Cons.(Spec.) Heavy Duty Stop-Leak: For repairing cracked cyl inders, engine blocks and water jackets in cars, trucks, buses and tractors. Will not harm hose or metal parts nor clog the system. Also recommended as a heavy duty stop-leak. Mixes readily with all standard type antifreeze solutions. CONTAINERS: 1-pt. cans. F.&F.-Cons.(Spec.) Liquid Tire Black: A ready mixed, black dressing for automobile tires and rubber mats. Dries quickly to a satin finish. CONTAINERS: 1-pt. cans. F.&F.-Cons.(Spec.) M.O.A. -- Motor Oil Additive: A crankcase lubricat ing oil additive effective in reducing oil consumption and in reducing the formation of sludge formed during "stop and go" driving. CONTAINERS: 15-oz. cans, 5- and 30-gal. drums. F.&F.-Cons.(Spec.) Motor Tune-Up: A blend of chemical additives and lubricating oil for improving lubrication of moving parts in the upper cylinder area of an automobile engine. Removes gum deposits and reduces gum formation. Frees and lubricates stickly valve stems and guides. Reduces wear, prolongs engine life. CONTAINERS: 8-oz. cans. F.&F.-Cons.(Spec.) New Car Wax: A triple-action paste wax especially formulated for use on new cars and those with finishes in excellent condition. Cleans with an "easy an the finish" cleansing action. Waxes with a hard, solid paste wax that protects. Glazes with a brilliant, dur- 19 DUP210011164  AUTOMOTIVE AUTOMOTIVE SPECIALTIES (Cont.) able weatherproof coating. CONTAINERS: 8-oz. and 1 2 -lb. cans. F.&F.-Cons.(Spec.) Orel Rubber Lubricant: Harmless to rubber, yet ef fectually penetrates and lubricates rubber shackles and all rubber parts. CONTAINERS: 1-gal. cans. F.&F.-Cons.(Spee.) Penetrating Lubricant and Moisture Guard: An aerosol product that displaces moisture from wet sur faces immediately on contact. Helps start wet engines, eliminates ignition short circuits due to moisture. Ex cellent penetrating lubricant--loosens corroded nuts, screws, bolts and locks. CONTAINERS: 8-oz. aerosol cans and 1-gal. cans. F.&F.-Cons.(Spec.) Plastic Cement: See Cements, Plastic, page 26. Pro-Tek Protective Hand Cream: A greaseless cream which, when rubbed on the hands and arms, protects against paint, lacquer, grime, grease, thinner and many chemicals. It washes off easily and takes the dirt with it. CONTAINERS: 8-oz. and 1- and 5-gal. cans. F.&F.-Cons.(Spec.) Rubber Dressing: A black liquid concentrate for thin ning with up to eight parts or more of lead-free gaso line to make an excellent tire dressing. For use by service stations and retreading shops on tires and rubber mats. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Cons.(Spec.) 7 Polish: An excellent cleaner and polish for all car finishes--new or old. Rubbed on; when dry it is wiped off with a clean cloth. This removes all dirt and chalked pigment, restoring original color and luster. CONTAINERS: 1-pt., 1-qt. and 1-gal. cans. F.&F.-Cons.(Spee.) 7 Rubbing Compound: A strong, abrasive cleaner for removing scratches and blemishes from auto finishes. Excellent for cleaning severely weathered finishes before waxing. Can be used for rubbing down newly sprayed finishes. Produces a smooth surface easily and quickly. CONTAINERS: 12-oz., 1-qt. and 1-gal. cans. F.&F.-Cons.(Spec.) Slipspray Dry Lubricant: Ari all-purpose, dry ubricant for use in the home, shop or office. Slip- spray is stainless, odorless, waxless and colorless. Contains no oil or silicone. Makes everything slide easier and work better--drawers, locks, windows, doors, screens, zippers, etc. May be applied to any surface--paint, car finishes, rubber, glass, plastic, leather and fabrics. Not affected by water, oil or solvents. Will not flush off, freeze or melt. CON TAINERS: 8-oz. aerosol cans. F.&F.-Cons.(Spec.) Speedy Cleaner: A liquid cleaner for all auto finishes. Removes chalked pigment, traffic film, wax, spray glaze and silicone polishes quickly and safely. Es pecially recommended for use before applying wax. CONTAINERS: 1-pt. and 1-gal. cans. F.&F.-Cons.(Spec.) Spray Glaze: A beauty treatment for automobiles, designed for use in a shop or service station. It pro duces a higher luster and has greater durability than waxes, yet requires less time and labor to apply. After the car finish is cleaned in the usual way, simply spray on Spray Glaze and wipe it off. This leaves a dry, brilliant shine without further polishing. CONTAINERS: 1-gal. cans. F.&F.-Cons.(Spec.) Spray Glaze Cleaner No. 1: A heavy duty cleaning compound designed for use by hand before applying Spray Glaze. Removes traffic film, chalked pigment and old wax quickly and safely. Suitable for all car finishes--new or old, lacquer or synthetic enamel. CONTAINERS: 1-gal. cans. F.&F.-Cons.(Spec.) Tire Lubricant: A chemical formulation that makes tire mounting and demounting by machine or hand tools easy--for either tubeless or tube-type tires. Helps seat bead easily, protects rubber. Gives long- lasting rubber lubrication. Beautifies tires and rubber mats. Easy to apply--saves shop time. CONTAINERS: 1-gal. cans. F.&F.-Cons.(Spec.) Wax Wash: A new liquid formulation that washes car clean and leaves a wax-bright shine. Will not streak or smear glass. Ideal for the new acrylic and enamel finishes and other finishes in good condition. CON TAINERS: 12-oz. plastic bottles. F.&F.-Cons.(Spec.) ShieldTM: A new product to shield the beauty of all car finishes, especially the newer lacquers and enamels now used by all car manufacturers. Gives mild cleans ing action. Can be applied to a new car four days after the car has been painted in manufacture. It sets up a hard, "repellent shield" between the car finish White Polishing Compound: A moderately strong cleaner for removing heavy traffic film and chalked paint pigment from the car finish. Can be used on all colors and all types of car paints. Excellent for remov ing scratches and stains. CONTAINERS: 12-oz., 1-qt. and 1-gal. cans. F.&F.-Cons.(Spec.) and dulling dirt and "traffic film"--actually improves scratch resistance of new car finishes. One applica tion of ShieldTM lasts for months. Car can be washed sparkling clean, quickly and easily. Grime does not White Wall Tire Cleaner: Cleans white wall tires easily, safely and economically. CONTAINERS: 1-pt. ond 1-gal. cans. F.&F.-Cons.(Spec.) stick. CONTAINERS: 1-pt. and 1-gal. cans. Windshield De-Icer. A new improved formulation ; F.&F.-Cons.(Spec.) that gives safer driving visibility by melting ice and 20 DUP210011165 AUTOMQTIVE-BAYMAL AUTOMOTIVE SPECIALTIES (Cont.) frost from car windshields, windows and headlights. Frees blades, thaws locks and won't smear glass. Harmless to all car finishes. CONTAINERS: 8-oz. aerosol cans. F.&F.-Cons.(Spec.) Windshield De-Icer and Washer Solvent: A new, improved formulation that quickly melts ice and frost from car windows, windshields and headlights to rproviac Suic Gi'iVii' visnj i r. thaws locks, and won't smear glass. May also be added to windshield washer reservoir in summer to provide detergent action for improved cleaning of windshields. Harmless to car finishes. CONTAINERS: 12-oz. plastic bottles. F.&F.-Cons.(Spec.) Windshield Washer Antifreeze: A selected blend of antifreeze chemicals that lowers the freezing point of water. Assures that windshield washer systems func tion properly in sub-zero weather. Prevents freeze-up as low as -- 15F. Windshields are kept ice-free and clean, providing improved driving vision. CONTAINERS-. 16-oz. cans. F.&F.-Cons.(Spec.) Windshield Washer Solvent: A concentrated de tergent antifreeze solution for year-round use in wind shield washers. Guards against freezing in winter and aids in removing bugs, grease and dirt during summer driving. CONTAINERS: 6-oz. cans. F.&F.-Cons.(Spec.) AUTOMOTIVE WAXES: See Automotive Specialties 7 Products, directly above. AVIATION FUEL ADDITIVE: See Petroleum Chemicals, Corrosion Inhibitors, Petroleum, AFA-l,page 113. AVIATION MIX: See Petroleum Chemicals, Antiknock Compounds, TEL Aviation Antiknock, page 111. AVITEX SOFTENERS: Avitex C, SF Cone, and W Softeners: A series of anionic fiber lubricants and softeners characterized by high resistance to heat and aging and based on the higher fatty alcohol sulfates. Orchem D. & C. Avitex K Durable Softener: A nonionic lubricant and softening agent designed especially for use with thermosetting resins. Recommended as a lubricant in the finishing of Lycra spandex fiber. Orchem D. & C. Avitex NA, Q and R: Highly effective cationic prod ucts for use alone, in combination with bodying and stiffening agents and thermosetting resins to reduce the development of static electricity and to increase the pliability and lubricity of natural and synthetic fibers and fabrics. Orchem D. & C. Avitex Y Cone, and YM Softeners: Concentrated liquid, cationic softeners that possess a high degree of effectiveness on all types of fibers. The liquid form of these softener concentrates makes them easy to handle. Orchem D. & C. AVITONE SOFTENERS: Anoionic products based on hydrocarbon sodium sulfon ates which impart excellent softening and lubricating properties to textiles, paper and leather. Avitone A is particularly useful on paper as a coating lubricant and plasticizer and to prevent sticking on dryers. Avitone AL is particularly useful as a sewing lubricant on textiles. Avitone SR is particularly useful on textile fabrics that require good rewetting characteristics. Orchem D. & C. Avitone I Softener: Anionic surfactant used as a leveling, dispersing, emulsifying, retarding and soften ing agent in the dyeing of polyester and nylon fibers and fabrics. Orchem D. & C. AZIDE, LEAD: See Lead Azide, page 98. AZO YELLOW: See Pigment Colors, Dalamar, page 124. 4 ,4 " -AZOBIS-4-BIPHENYLCARBOXYLIC ACID, DI SODIUM SALT TECHNICAL: ABC Salt. Solid form; a Chemical Intermediate. Orchem D. & C. AZQBISISOBUTYRGNITRILE: See Vazo Vinyl Poly merization Catalyst, page 161. AZOIC COMPOUNDS: See Dyes, Naphthanil, page 54. AZOTIC ACID: See Acids, Nitric Acid, page 4. B B BLASTING POWDER: See Explosives, Black Blasting Powder, page 59. BAGS, TAMPING: See Explosives, Blasting Accessories and Supplies, page 61. BARAK RUBBER ACTIVATOR: See Activator tor Nat ural and Synthetic Rubber, page 5. BASES, ADHESIVE: See Adhesive Bases, page 5. BASIC COLORS: Cationic dyes used exclusively in paper, leather, pigments, carbon paper and inks. Orchem D. & C. BASIC ZINC CHROMATE: See Pigment Colors, page 124. BATTERY ACID: See Acids, page 3. BAYMAL COLLOIDAL ALUMINA--TECHNICAL AND DRUG GRADE: A white powder; dispersible in water to form a stable, positively charged, colloidal sol. Ultimate particles are fibrillar crystals approximately 100 milli- 21 DUP210011166 BAYAAAL-B!S BAYMAL (Cont.) microns long by 5 millimicrons in diameter. Chemical structure is boehmite-AlOOH; specific surface area is ap proximately 275 m2/g; pH of a 4.0% sol is 4.1-4.3. Spontaneously disperses in water to form sols possessing wide viscosity range, from very fluid to extremely viscous and thixotropic. Forms continuous, coherent films. Has binding properties and high surface reactivity. Will ex haust onto negatively charged surfaces in aqueous sys tems. USE: High temperature binders and adhesives; refractory and chemically resistant coatings for metals and ceramics; stop-off coatings for molten aluminum, zinc, solder; mold and core wash for casting aluminum and zinc; modifier for high alumina ceramics; fiber con ditioner for paper to increase exhaustion efficiency of beater additives; emulsifying and thickening agent; paper and textile treatment to improve dyeability; sur face modifier; anchoring and adhesion promoter; high alumina catalyst component; emulsifying, thickening and suspending agent for cosmetics; improve water resistance of cosmetic lotions, perfumes; modify polymers; thin coat ings to improve heat resistance of inorganic and organic materials; component of electrical and thermal insula tions; textile finish for improving hand, softness, bulk, crispness; antistat and pill retardant for synthetic tex tiles; binder for inorganic paper--asbestos, glass, alumino-silicates; coagulant for proteins; absorbent for re moval of organic acids--sulfonates, phosphates, carboxylates; binder for inorganic coatings--graphite, mica, titania, clay, alumina. Densifier for high alumina ceramics; thickening, suspending and leveling agent for aqueous finishes, coatings, colors and adhesives; agent for selective chromatographic separations; flocculating agent for clarification and purification processes. CON TAINERS: 5- and 50-lb. net weight fiber drums. Ind.&Bio.-Ind. BCO SURFACE ACTIVE AGENT: See Product BCO Sur face Active Agent, page 130. BELT CEMENT: See Cements, Belt, page 26. BENZANTHRONE: Sold as 7H-Benz(de)anthracen-7one Technical, a Chemical Intermediate. Orchem D. & C. BENZIDINE YELLOW PIGMENTS: See Pigment Colors, page 124. BENZ(c,d)-INDOL-2( 1H)-ONE. Sold as Naphthostyril Technical, a Chemical Intermediate. Orchem D. & C. p-BENZOQUINONfc, MONGOXiME: Soid as p-Nitro- sophenol (Tautomeric Form), a Chemical Inter mediate. Orchem D. & C. 2-BENZOTHIAZOLYL DISULFIDE: See Accelerators for Natural and Synthetic Rubber, MBTS, page 1. o-BENZOYLBENZOIC ACID TECHNICAL. Solid form; a Chemical Intermediate. Orchem D. & C. N-BENZYL-N-ETHYL-M-TOLUIDINE. Sold as N-Ethyl- N-benzyl-m-toluidine Technical, a Chemical Inter mediate. Orchem D. & C. BETA LACTOSE MIXTURE: See Nitroglycerin, page 107. BETAINE: See Product BCO, page 130; Product BDO, page 130. BETA NAPHTHOL: See Dyes, page 53. (3,3'-BI-7H-BENZ(DE) ANTHRACENE)-7,7'-DION E TECHNICAL: 13,13'-Dibenzanfhronyi. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. (4,4'-BI-7H-BENZ( DE) ANTHRACENE)-7,7'-DION E TECHNICAL: 2,2'-Dibenzanthronyl. Amorphous solid form; a Chemical Intermediate. Orchem D. & C. BICKFORD'S FUSE: See Explosives, Blasting Accessories and Supplies, page 60. BINDERS: See Baymal, page 21; Ludox, page 100; Resins (Not Molding), Elvacet, Elvanol, Elvax, pages 134 to 137; Sodium CMC, page 142. 4-(4-BENZAMIDO-1 -ANTHRAQUINONYLAMINO) N APHTH( 2,3-c) ACRIDINE-5,8,1 4( 13H) TRIONE TECHNICAL: Anthrimide for Red Brown RB. Powder form; a Chemical Intermediate. Orchem D. & C. 1-BENZAMIDO-5-CHLOROANTHRAQUINONE TECH NICAL. Crystalline powder form; a Chemical Inter mediate. Orchem D. &C. BENZANILIDE TECHNICAL. Crystalline solid form; a Chemical Intermediate. Orchem D. &C. 7H-BENZ(DE) ANTHRACEN-7-ONE TECHNICAL. Benzanthrone. Amorphous solid form; a Chemical Intermediate. Orchem D. &C. (1,1 '-BINAPHTHALENE)-8,8'-DICARBOXYLIC ACID TECHNICAL: DINA Acid. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. BINDING MATERIALS: See Coated Fabrics, Fabrikoid, page 42. 1.4- BIS(1-ANTHRAQUINONYLAMINO) ANTHRAQUINONE TECHNICAL: Anthrimide for Brown RBT. Powder form; a Chemical Intermediate. Orchem D. & C. 1.5- BIS( 1 -ANTHRAQUINONYLAMINO) ANTHRAQUINONE TECHNICAL: Anthrimide for Yellow 3R. Powder form; a Chemical Intermediate. Orchem D. & C. 22 DUP210011167 BIS-BORATE 4,4'-BIS(DIETHYLAMINO) BENZOPHENONE TECH NICAL: Ethyl Ketone. Granular solid form; a Chem ical intermediate. Orchem D. & C. 4,4'-BIS(DIMETHYLAMINO) BENZHYDROL TECH NICAL: Michler's Hydrol; Hydrol. Paste form; a Chemical Intermediate. Orchem D. & C. 4,4'-BIS(DIMETHYLAMINO)BENZOPHENONE TECH NICAL: Michler's Ketone. Solid form; a Chemical In+ormorlin+o H J2. ^ 1,5-BIS(2,4-DINITROPHENOXY) - 4,8-DINITRO- ANTHRAQUINONE TECHNICAL: 4,8-Dinitro- phenylether anthraquinone. Paste form; a Chemical Intermediate. Orchem D. & C. N,N-BIS(2-HYDROXYETHYL)ANILINE: Sold as 2,2'- Phenyliminodiethanol Technical, a Chemical Inter mediate. Orchem D. & C. 1,4-BIS( 2,4,6-TRIETHYLANILINO) ANTHRAQUI NONE TECHNICAL: Milling Blue BL Base. Powder form; a Chemical Intermediate. Orchem D. & C. 2,2-BIS( P-METHOXYPHENYL)-1,1,1-TRICHLOROETHANE(METHOXYCHLOR) : See Insecticides, Marlaic, page 94. BISULFATE OF SODA: See Sodium Bisulfaie, page 142. BISULFITE, SODIUM: See Sodium Bisulfite, page 142. BLACK BLASTING POWDER: See Explosives, page 59. BLACK SPORTING POWDER: Available in a variety of fineness granulations. For muzzle loaders and other guns designed for black powder. CONTAINERS: 1-lb. canisters and 25-lb. metal kegs. Explo.-C.P.S. BLASTING ACCESSORIES AND SUPPLIES: See Explos ives, page 59. BLASTING GELATIN (SNG): See Explosives, Dynamites, page 62. BLASTING POWDER: S ee Explosives, Dynamites, page 62. BLEACH, WOOD: See Finishes, Industrial, Du-Life Wood Bleach, page 74. BLEACHING AGENTS: See Calcium Peroxide, page 24; Hydrogen Peroxide, page 92; Hydrosulfite, page 93; Oxone, page 110; Perdax, page 111; Sodium Perbor ate Tetrahydrate, page 143; Sodium Silicate Solution, page 143; Sodium Peroxide, page 143; Zepar, page 164; Zinc Peroxide, page 165. BLOWING AGENTS: See Blowing Agents for Natural and Synthetic Rubber, directly below; Freon Products, page 85; Hydrogen Peroxide, page 92; Hylene, page 93; Nitrosan, page 108; Unicelm, page 160; Urea, page 160. BLOWING AGENTS FOR NATURAL AND SYNTHETIC RUBBER: Unice!TM ND Blowing Agent: 42% di-N-nitrosopen- tamethylene-tetramine-- NCri2N(NO)CH2N(CH2)CH2N(NO)CH2 and 58% inert filler. Cream-colored powder; Sp. Gr. 1.93. USE: A nondiscoloring blowing agent for manufacture of natural or synthetic rubber sponge. CONTAINERS: 100-lb. drums. Elastomers UnicelTM NDX Blowing Agent: 80% di-N-nitrosopentamethylene-tetramine and 20% inert filler. Creom-colored spongy crumb; Sp. Gr. 1.40. USE: A nondiscoloring blowing agent for natural or syn thetic rubber sponge. CONTAINERS: 100-lb. drums. Elastomers UnicelTM S Blowing Agent: 50% dispersion of finely divided sodium bicarbonate in oil. A cream-colored, free-flowing liquid; Sp. Gr. 1.20. USE: A blowing agent for manufacture of natural or synthetic rubber sponge. Co n t a in e r s .- 500-lb. drums. Elastomers BLUE ROCK SKEET OUTFIT: See Traps and Targets, page 158. BLUE ROCK TRAPS AND TARGETS: See Traps and Targets, page 158. BLUE RXO BASE; Sold as l-Amino-2-methyl-4-p-tolu- idinoanthraquinone Technical, a Chemical Inter mediate. Orchem D. & C. BLUE SKY BASE: Sold as 1 -Amino-2-bromo-4-p-tolu- idinoanthraquinone Technical, a Chemical Inter mediate. Orchem D. & C. BODY STAINS: See Ceramic Products, page 27. BON RED AND MAROON PIGMENTS: See Pigment Colors, page 124. BOOK CLOTH: See Coated Fabrics, PX Book Cloth, page 42. BOOKBINDING ADHESIVES: See Adhesives, Hot Melt Bookbinding, page 6. BOOSTERS, EXPLOSIVE: See Explosives, Blasting Agents, page 62. BORATE, PERHYDRATE: See Perdox Sodium Borate Perhydrafe, page 111. 23 DUP210011168 BRAKE-CALCIUM BRAKE FLUIDS: See Automotive Specialties 7 Products, page 18. BRIGHTENERS (FLUORESCENT): See Pontamine Whites, page 54. BRIGHTENERS (PLATING): See Electroplating Prod ucts, page 56. BRISTLES, NYLON: See Plastics, Tynex Nylon Bristles, page 128. BROMACIL: See Weed and Brush Killers, Hyvar X-WS Bromacil, page 162. BROMAM1NE ACID: Sold as l-Amino-4-bromo-2anthraquinonesulfonic acid, sodium salt Dry and Paste Technical, a Chemical Intermediate. Orchem D. & C. 3-BROMO-7H-BENZ(DE)ANTHRACEN-7-ONE TECH NICAL: Bromobenzanthrone. Paste form; a Chem ical Intermediate. Orchem D. & C. BROMOBENZANTHRONE: Sold as 3-Bromo-7H-benz- (de)anthracen-7-one Technical, a Chemical Inter mediate. Orchem D. & C. 1- BROMO-4-METH YLAMINOANTHRAQUINONE TECHNICAL: Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 2- BROMO-3-METHYLANTHRAQUINONE TECHNICAL: Crystalline powder form; a Chemical Intermediate. Orchem D. & C. o-(3-BROMO-P-TOLUOYL) BENZOIC ACID TECH NICAL: Solid form; a Chemical Intermediate. Orchem D. & C. BULLETS: See Ammunition, page 11. BURNISH GOLDS: See Ceramic Products, page 27. BUTACITE POLYVINYL BUTYRAL RESIN: See Plas tics, page 125. BUTANE DICARBOXCYLIC ACID: See Acids, Adipic Acid, page 3. n-BUTANOL FORMALDEHYDE 51-40: A clear, color less reaction product containing 40% formaldehyde, 51.5% n-butyl alcohol and 8.5% water. Density 8.1 Ib./gal. USE: In manufacture of resins for textile, paper and paint applications; chemical synthesis. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-Ind. BUTTER OF ZINC: See Zinc Chloride, page 165. N-n-BUTYL-p-AMINOPHENOL SOLUTION: See Petro leum Chemicals, Antioxidants, Petroleum, Gasoline Anti oxidant No. 5, page 112. p-BUTYLANILINE TECHNICAL: Liquid form; a Chem ical Intermediate. Orchem D. & C. 2-TERT-BUTYLANTHRAQUINONE TECHNICAL: Crys talline solid form; a Chemical Intermediate. Orchem D. & C. n-BUTYL METHACRYLATE: See Methacrylate Mono mers, page 102. n-BUTYL METHACRYLATE POLYMER: See Resins (Not Molding), Lucite 2044, page 136. BUTYL RUBBER ACTIVATOR: See Accelerators for Natural and Synthetic Rubber, Polyac, page 2. 2-BROMO-l ,3,5-TRIETHYLBENZENE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. BROMOTRIFLUOROMETHANE: See Freon Products, Freon-?3B7, page 86. BROWN GOLD (GOLD POWDERS): See Ceramic Products, page 27. BRUSH KILLERS: See Weed and Brush Killers, page 162; Lawn and Garden Products, page 98. BRUSHES: See Combs and Brushes, page 44. BUCKSHOT LOADS: See Ammunition, page 12. BUDIUM POLYBUTADIENE CAN COATINGS: See Finishes, Industrial, Tin Decorating, page 76. BU/LDJNGS FOR DISMANTLEMENT: See Surplus Materials, page 146. BULK POWDER: See Smokeless Powder, page 140. c CABLE INSULATION: See Plastics, Alathon,page 125; Synthetic Rubber, Hypalon and Neoprene, pages 147 to 149. CADALYTE BRIGHT DIP, BRIGHTENER, MAINTE NANCE COMPOUNDS, PLATING SALTS: See Electro plating Products, page 56. CADMIUM PLATING PRODUCTS: See Electroplating Products, page 56. CALCIUM PEROXIDE--Ca03: Cream-colored powder containing CaOj and CaO; Ca02 content min. 75%; ac tive oxygen content min. 16.65% by weight. Liberates oxygen slowly in water suspension; decomposed by heat; insoluble in alcohol, ether and ammonia; soluble in weak acids or ammonium salt solutions. USE: Preparation of bread dough developers; in pharmaceutical and cos metic preparations; general oxidation applications; as curing agent in elastomers such as polysulfide caulking 24 i DUP210011169 CALKING-CELLULOSE CALCIUM PEROXIDE-- Ca02 (Cent.) and sealing compounds; to improve heat resistance of certain elastomers such as butyl rubber and HR. CON TAINERS: 25-and 100-lb. fiber drums. Electrochem. CALKING COMPOSITIONS: See Finishes, Trade Sales (Consumer Products), page 77. CAMERA NEGATIVE FILMS: See Photographic Prod ucts, page 119. CAN COATINGS: See Finishes, Industrial, Tin Decorat ing, page 76. CANTRECE NYLON: See Fibers, Synthetic, Nylon, page 65. CAP CRIMPER: See Explosives, Blasting Accessories and Supplies, page 60. CAPRACYL DYES; See Dyes, page 53. CAPROLACTAM--(EPSILON) --POLYMER GRADE-- (CH2)5CONH: Available as a white, flaked solid or in molten form. USE: A high purity monomer for manu facture of polyamides and as an intermediate in organic syntheses. CONTAINERS: Tank cars (molten monomer), 55-lb. net multi-wall paper bags and 250-lb. net fiber drums. Explo.-C.P.S. CAPS, BLASTING: See Explosives, Blasting Accessories and Supplies, page 59. CAPTIVE-STUDTM KIT: See Tools, Powder Actuated, Stud Drivers, page 157. CAR UPHOLSTERY CLEANER: See Automotive Spe cialties 7 Products, page 18. CAR WASH: See Automotive Specialties 7 Products, page 18. CAR WAX: See Automotive Specialties page 19. Products, CARBONATE REMOVER: See Electroplating Products, page 56. N,N'-CARBONYLBIS( 4-METHOXYMETANILIC ACID), DISODIUM SALT TECHNICAL: 4-Methoxymetanilic acid urea. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. CARBOXYMETHYL CELLULOSE: See Sodium CMC, page 142; Qualex Refined Sodium CMC, page 132. a-CARBOXY-o-TOLUIC ACID: Sold as Homophthalic Acid Technical; a Chemical Intermediate. Orchem D. & C. CARRIER, DYE: See Latyl Carrier A, page 96. CARTRIDGES: See Ammunition, page 11. CATALYST, VINYL POLYMERIZATION: See Vazo Vinyl Polymerization Catalyst, page 161. CATALYSTS: See Tyzor, page 159. CAVAL1TE DYES: See Dyes, page 53. CELANTHRENE DYES: See Dyes,.page 53. CELLOPHANE: KINDS: Basic film types include plain, semimoistureproof, and moistureproof in a number of grades to meet the packaging requirement for many products. All types are transparent, strong, flexible, resistant to grease and oil and are efficient for high speed machine wrapping. The polymer coated types (K cellophanes) provide superior appearance, moisture pro tection and durability, and are highly resistant to oil and grease. They are designed for use on a wide variety of products, including baked goods, cookies, potato chips and candy. One type of K cellophane is nonfogging and is of particular use for packaging fresh produce, frozen baked goods and other frozen foods. Other types of K cellophane are especially designed for thermal and adhesive laminations to films, papers and foils. Th ic k n es s es : From 0.008-0.0017 in., with yields of 25,000-11,600 sq. in. per lb. USE: Cellophane is used as a wrapper or bag to provide protective packages with maximum visibility of product and good merchan dising qualities. Other uses include fabricated articles and industrial applications. Some of the major uses are: Plain (non-moistureproof)--Paper, textiles, pres sure sensitive tape and other fabricated articles. Moistureproof (non-heat sealing)--Cigars, ciga rettes, candy, cheese. Moistureproof heat sealing--Bakery products, fresh meats, nuts, potato chips, dried fruit, frozen food, dairy products, cereals, candy, drugs, medical supplies, hardware, textiles. Semi-moistureproof--Fresh fruits and vegetables, luncheon meats. AVAILABLE Fo r ms : Supplied by Du Pont in rolls and cut-to-size sheets. Rolls are slit to order in 1/16-in. multiples; widths from 5/16 to approximately 46 in. Cut- to-size sheets are prepared according to specifications in dimensions up to approximately 40 x 50 in. Supplied in printed bags, rolls, sheets and other forms by author ized converters and fabricators, names of whom will be supplied upon request. Film CELLULOSE ACETATE FIBER: See Fibers, Synthetic, Acele, page 65. CELLULOSE ACETATE FILM: See Film, Acetate, page 65. CELLULOSE ACETATE FLAKE: Secondary cellulose ace tate in flaked or powdered form of approximate aver- 25 DUP210011170 CELLULOSE-CERAMIC CELLULOSE ACETATE FLAKE (Cont.) age composition C6H702(0H)'/2 (CH3COO)2 Vt . USE: For making lacquers for textile coatings, wire coatings and miscellaneous other applications. CONTAINERS: Moisture-resistant 50-lb. sacks. (See Also Plastics, Plastacele^, page 127) Explo.-C.P.S. CELLULOSE FILM: See Cellophane, page 25. CELLULOSE, SODIUM CARBOXYMETHYL: See Sodium CMC, page 142; Qualex Refined Sodium CMC, page 132. . CELLULOSE SPONGE: See Sponges, Cellulose, page 144. CELLULOSE SPONGE YARN: See Sponges, Cellulose, (Also See Adhesives) Automotive Gasket Cement: See Finishes, Auto motive, page 68. Belt Cements: Pyroxylin base cements used in the manufacture of leather belts requiring resistance to the effects of moisture. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) Bookbinding: See Adhesives. Hot Melt Bookbinding, page 6. Duco Cement: A transparent, flexible, waterproof adhesive used in the manufacture or repair of articles made of wood, glass, china, metal, ivory, leather, paper or fabrics. Patented applicator tip keeps ce ment off fingers, permits application to small areas. CONTAINERS: % -fl. oz. tubes and 1 %-oz. tubes (12 to display carton). F.&F.-Cons.(Spec.) Fairprene Industrial Cements: These products are made from synthetic rubber compounds for cementing various combinations of cured and uncured Foir- prene sheet slock (without fabric insert), cured and uncured Fairprene coated fabrics, cured and un cured rubber to leather, fabrics, paper, metal and wood. F.&F.-Fabrics. Hot Melt Bookbinding: See Adhesives, Hot Melt Bookbinding, page 6. Household Cement (Waterproof Cement); A pyroxylin base cement having a wide utility in the re pair of articles made of wood, glass, ivory, leather, pearl or cloth. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(Jnd.) Plastic Cement: An all -purpose plastic cement that repairs most household plastics--Vinyl, styrene, acrylic and phenolic. Gives a strong, clear, fast-drying waterproof bond. Excellent household cement for leather, wood, china, metal, glass or paper. CON TAINERS: 1 % -oz. tubes (12 to display carton). F.&F.-Cons.(Spee.) Pyroxylin Cements: Pyroxylin base cements for use in cementing plastic facings 1o wooden heels by manu facturers of women's shoes. CONTAINERS: 1-and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(Ind.) Special Cements: A wide range of adhesives for an extended field of specialized uses pertaining to the problems of bonding various substances, including Mylar polyester film, and involving many modifica tions of various application and curing methods. Co n t ain er s : 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) Super Cement: For repairing almost everything. Excellent for metal, glass, wood, paper, cloth, leather and china, plus all mendable plastics. An ideal ce ment for mending household articles. CONTAINERS: 1%-oz. tubes (12 In display carton). F.& F.-Cons.( Spec.) Thermoplastic Cements: Used for cementing or laminating various surfaces, such as metal foils, cloth, glass and sheets of metal that require the application of heat and pressure. These cements are applied to the surfaces and after thorough drying are ready for the heat and pressure treatment required. CON TAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) CERAMIC PRODUCTS: Ceramic Colors Glass Enamels: A series of finely ground frits, basic ally lead borosilicate, intimately blended with colored ceramic pigments. Full range of colors available in paste (mixture of enamel with air-drying or thermo fluid squeegee medium) or dry form. Different grades give characteristics of acid resistance, alkali resistance, sulfide resistance, or low lead release to meet require ments for various uses. Firing range 1000"'-1400F. (537.8-760C.). USE: For fired-on labels and deco rations on glassware, tumblers, milk bottles, beverage bottles, glass containers, illuminating ware, archi tectural glass, and signs. CONTAINERS: Dry colors-- 25-, 50-, 100- and 200-lb. fiber drums; Paste colors-- 100-lb. (5-gal.) steel pails; Thermofluid enamels-- 50-lb. (5-gal.) steel drums and 200-lb. (20-gai.) steel pails. Electrochem. Gold Colors: Finely ground mixtures of low-melting glasses and gold-base pigments suitable for use over all standard glazes and in porcelain enamels. Firing range 1300-1500F. (704.4-815. 6C.); cones 018-014. USE: Same as overglaze colors, below. CONTAINERS: Under 25 lb.--cans; 25 lb. or more-- 25-lb. (3-gal.) drums. Electrochem. Overglaze Colors: Finely ground mixtures of pig- 26 DUP210011171 CERAMIC CERAMIC PRODUCTS (Cont.) ments and low-melting glasses suitable for use over standard glazes. Temperature range 1300--1500F. (704.4-815.6C.); cones 018-04. USE: For bands, decalcomanias, and similar decorative designs fired on china, pottery, terra cotta, tile, and other glazed ceramic surfaces. CONTAINERS: Dry colors--25-, 50-, 100-, and 200-lb. fiber drums; paste colors--100-lb. (5-gal.) steel pails. Electrochem. Frits (Fluxes) Frits: Low-melting glasses. Firing temperatures 950- 1300F. (510-704.4C.). USE: To lower fusing tem peratures of refractory materials. CONTAINERS: 25-, 50-, 100- and 200-lb. drums. Electrochem. Porcelain for Aluminum: Vitreous frits which fire at 970-1000F. (521.1 -537.8C.). For use on alum inum and aluminum alloys. Enamels have relative resistance to impact, chemical attack, thermal shock and salt water corrosion. USE: For imparting chemical resistance, dielectric strength and color to aluminum and its alloys. CONTAINERS: 25-, 50-, 100- and 200-lb. fiber drums. Electrochem. Lusters Luster Colors: Liquids containing resinates or similar organic compounds of various base or precious metals. USE: For decorating pottery, glass, tile, china, terra cotta, and similar ceramic surfaces with fired-on iri descent coatings. CONTAINERS: Precious metal lusters-- 500-g (1-lb.) bottles; base metal lusters--1-gal. (7-lb.) bottles. Electrochem. Mediums and Thinners Squeegee Mediums (Squeegee Oils): Specially compounded organic vehicles for paste colors applied by stencil screen. USE: As vehicles for paste colors for stencil application on glassware, tumblers, bottles, porcelain enamel, pottery, etc. CONTAINERS: 55-gal. drums. Electrochem. Thinners: Essential oils and mixtures thereof for use with precious metal preparations. USE: Thinning and extending precious metal preparations used in dec orating ceramicware. CONTAINERS: 1-lb. bottles. Electrochem. . Pigments Body Stain Pigments: Finely ground calcined oxide pigments for coloring ceramic bodies. USE: As colors for ceramic floor and wall tile, terra cotta, china- ware, etc., where the pigment becomes part of the ceramic body. CONTAINERS: 25-, 50-, 100- and 200-lb. fiber drums. Electrochem. Enamel Pigments: Finely ground calcined oxide mix tures. Maximum firing temperature 1600F. (871.1C.). USE: For coloring vitreous enamels for application on sheet steel, cast iron or aluminum. CONTAINERS: 25-, 50-, 100- and 200-lb. drums. Electrochem. Glaze Stain Pigments: Finely ground calcined oxides for use in coloring ceramic glazes. USE: Coloring glaze coatings for pottery, tile, terra cotta and similar ceramicware. CONTAINERS: 25-, 50-, 100- and 200-lb. fiber drums. Electrochem. Special Pigments for Plastics, Paper and Textiles: Finely ground calcined oxides having good color sta bility to light and temperature. USE: For coloring nylon, paper, plastics and textiles, where special stability is desirable. CONTAINERS: 25-, 50-, 100- and 200-lb. fiber drums. Electrochem. Precious Metal Composition (Decorative) Brown Gold (Gold Powders)-Au: Finely divided, dry preparations containing gold and usually a flux. For dry application by dusting on a tacky surface to pro duce heavy gold deposits which have good stability and long-wearing qualities. USE; To prepare ceramic decalcomanias for decorating china, pottery, tile, and other ceramic base materials with fired-on gold de signs. CONTAINERS: 1-, 3-, 8-, 16-, 24- and 32-oz. jars. Electrochem. Burnish Golds: Finely divided gold powder combined with suitable fluxes and incorporated into low-viscosity vehicles for brush application. Produce heavy, stable, long-wearing gold deposits. Fire to a matte surface, which is burnished to develop true gold surface texture. White metal decorations, composed of platinum and palladium metals, are also available. USE: Decorating fine china and ceramicware with fired- on gold designs. CONTAINERS: 1-, 3-, 8-, 16-, 24- and 32-oz. jars. Electrochem. Liquid Bright Golds: Liquid compositions suitable for application by brushing, stamping, spraying or stenciling (squeegee). Fire to a bright mirror surface. USE: Decorating pottery, glass, tile, terra cotta, enameled metals, etc., with fired-on, bright gold de signs. CONTAINERS: 100- and 500-g bottles. Electrochem. Liquid Bright Palladiums and Platinums: Liquid compositions suitable for application by brushing, stamping, spraying or stenciling (squeegee). Fire to a silver mirror surface. USE: Decorating pottery, glass, tile, terra cotta, enameled metals, etc., with fired-on, bright silvery designs. CONTAINERS: 100- and 500-g bottles. Electrochem. 27 DUP210011172 CERAMIC-CHEMICAL CERAMIC PRODUCTS (Cont.) Paste Golds: Heavy compositions of powdered gold and flux which can be printed by tissue transfer method or diluted for brush application. Fire to a matte surface which is burnished to develop true gold texture. USE: Decorating fine chinaware and other ceramic surfaces with gold designs; for decorat ing ceramicware with encrusted or Roman gold de signs. CONTAINERS: 1-, 3-, 8-, 16-, 24- and 32-oz. jars. Electrochem. CERESAN SEED DISINFECTANTS: See Seed Treat ments, page 139. CETYL ALCOHOL: See Loral 24, page 100. CETYL BETAINE: See Product BCO Surface Active Agent, page 130; Wetting Agents for Natural and Syn thetic Rubber, Aquarex NS, page 163. CHAIN SAWS AND ACCESSORIES Chain Saws 1 -P: One-man air-powered saw with 400-fpm chain speed, 4-vane rotary motor, automatic oiler, equipped with %-in. pitch--0.058-in. tang chain, 12-in. Reming ton roller bearing guide bar. Rem. Arms. 2- MG: Detachable geared-transmission (2.86-to-l ratio), 360 indexing bar, 9/16-in. pitch--0.077-in., tang chain. Remington roller bearing guide bars in 18-, 24-, 30-, 36-, 42- and 54-in. lengths. Rem. Arms. 3- E Model: AC-DC, 26 to 60 cycle, 115 volts (230 volts available), rated 25 amps at 115 v. Spiral bevel gears, 800-fpm chain speed; generator wattage re quired: 5,000 watts. 9/16-in. pitch--0.058-in. tang chain, 24- or 36-in. Remington roller bearing guide bars. Rem. Arms. 6-P: Two-man air-powered saw with 1400-fpm chain speed, 4-vane rotary motor, automatic oiler, equipped with 9/16-in. pitch--0.077-in. tang chain. Remington roller bearing guide bars in lengths of 18, 24, 30, 36 and 42 in. Rem. Arms. Bantam: Direct drive, 2800-fpm engine speed at full load, 0.404-in. pitch--0.058-in. tang chain. Remington roller bearing guide bars in 13-, 17-, 21-, 24-, and 31-in. lengths. Horizontally mounted engine. Rem. Arms. EL: AC-DC, 25 to 60 cycle, 115 volts, rated 12 amps at 115 v. Spiral bevel gears, 750-fpm chain speed; gen erator wattage required: 2,000 watts. 7/16-in. pitch --0.058-in. tang chain. Remington roller bearing guide bar 18 in. long. Rem. Arms. Super 660: Similar to Bantam, but with deluxe fea tures. Rem. Arms. Super 660G: Similar to Bantam, but with 4 to 1 gear transmission. 7/16-in. pitch chain--0.058-in. tang chain. Bar lengths to 30 in. Rem. Arms. Super 770: Direct drive, 2850-fpm engine speed at full load. Remington power pulse engine, 7/16-in. pitch--0.058-in. tang chain. Remington roller bearing guide bars in 13-, 17-, 21-, 24-, 31- and 37-in. lengths. Horizontally mounted engine. Rem. Arms. Super 770G: Similar to Super 770, but with 2.34 to 1 gear transmission. Bar lengths to 41 in. also available with 14-in. plunge bow. Rem. Arms. Super 990: Identical to Super 770, above. Rem. Arms. Chain Saw Accessories Remington 48411 Chain Saw Oil: Made for 2-cycle engines--specifically formulated for mixing with gaso line. CONTAINERS: 1-pt. cans in 24-pt. boxes. Rem. Arms. Remington Flat Top Saw Chain: 7/16-in. pitch-- 0.058-in. tang. Features specially designed cutting teeth for fast cutting, easier sharpening, maximum strength. In lengths to Fit guide bars and in 50- and 100-ft. reels. Rem. Arms. CHASSIS BLACKS: See Finishes, Automotive, page 69; Finishes, Refinish, page 71. CHEMICAL INTERMEDIATES start on page 29 and continue through page 38. 28 DUP210011173 ICHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES The intermediates in this list are presented alphabetically by the DuPont sales name. It should be noted that these sales names are a mixture of the Chemical Abstracts system, the Geneva system and trivial names. These inter mediates are sold by the Organic Chemicals Department, Dyes and Chemicals Division. 5-Acetamido-8~Amino-2-Naphthaienesuifonic Acid Technical Acetylamino-1,6-Clevefs Acid 8-Acetamido-5-Amino-2-Naphthalenesulfonic Acid Technical Acetylamino-1,7-Cleve's Acid 8-Acetamido-2-Naphthalenesuifonic Acid, Magnesium Sait Technical Acetyl-1,7-Cleve's Acid p-Aminoacetanilide Technical Acetyl-p-phenylenediamine 5- Amino-2-(p-Aminoanilino)Benzenesulfonic Acid Technical Phenylene Nerol Acid 4,4'-Diaminodiphenylamine-2-sulfonic acid 1 -Aminoanthraquinone Technical 2-Aminoanthraquinone Technical N-(5-Amino-l-Anthraquinonyl) Anthranilic Acid Technical N-(8-Amino-l Anthraquinonyl)Anthranilic Acid Technical 4-Aminoazobenzene-3,4'-Disulfonic Acid Technical 4-Aminoazobenzene Hydrochloride Technical p-Phenylazoaniline hydrochloride 4- Aminoazobenzene-4'-Sulfonic Acid, Sodium Salt Technical p-(p-Aminophenylazo)benzenesulfonic acid, sodium salt Aminoazotoluene Technical 4-(o-Tolylazo)-o-toluidine (NH2=1) 6- (p-(p-Aminobenzamido)Benzamido)-l-Naphthol-3-Sulfonic Acid Technical p-Aminobenzoyl PA8 J Acid 6-(m-Aminobenzamido)-l-Naphthol-3-Sulfonic Acid Technical m-Aminobenzoyl J Acid 6-(p-Aminobenzamido)-l-Naphthol-3-Sulfonic Acid Technical p-Aminobenzoyl J Acid 5- Amino-2(3H)-Benzimidazolone Technical p-Aminobenzoic Acid Dry Technical p-Aminobenzoic Acid Paste Technical l-Amino-4-Bromo-2-Anthraquinonesulfonic Acid, Sodium Salt Dry Technical l-Amino-4-Bromo-2-Anthraquinonesulfonic Acid, Sodium Salt Paste Technical Bromamine Acid 1- Amino-4-Bromo-2-Methylanthraquinone Technical 1 -Amino-2-Bromo-4-p-Toluidinoanthraquinone Technical Blue SKY Base 1 -Amino-5-Chloroanthraquinone Technical 1 -Amino-8-Chlaroanthraquinone Technical 2- Amino- 1-Chloroanthraquinone Technical 1 -Amino-2,4-Dibromoanthraquinone Technical 5-Amino-2-(2,3-Dihydro-2-Oxo-5-Benzimidazolylamino) Benzenesulfonic Acid Technical ASA azolone p-Aminodiphenylamine Technical N-Phenyl-p-phenylenediamine l-Amino-4-Hydroxyanthraquinone Technical l-Amino-4-Methoxyanthraquinone Technical m-(4-Amino-3-Methoxyphenylazo)Benzenesulfonic Acid Technical Methoxyaminoazobenzene sodium sulfonate 1 -Amino-2-Methoxy-4-( p-Tolylsulfonamido) Anthraquinone Technical Pink 3B tosylamid 29 Crystalline Solid Crystalline Solid Powder Amorphous Solid Crystalline Paste Crystalline Paste Paste Paste Crystalline Solid Crystalline Paste Solid Paste Powder Powder Powder Powder Powder Powder Paste Crushed Solid Paste Paste Paste Powder Orchem D. & C. DUP210011174 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Coni.) 1 -Amino-2-Methylcmthraquinone Technical l-Amino-2-Methyl-4-p-Toluidinocsnthraquinone Technical Blue RXO Base l-Aminonaphth(2,3-c)Acridine-5,8,14( 13H)-Trione Technical 8-Amino-l;2-benzacridine 4-Aminonaphth(2,3-c) Acridine-5,8,14( 1 3H)-Trione Technical 8-Amino-1,2-benzacridine 4-Amino-l,6(and 1,7)-Naphthalenedisulfonic Acid Technical Pi_ui', i ii o na i. ivJ 6- Amino-l ,3-Naphthalenedisulfonic Acid, Disodium Salt Technical Amino J Acid 7- Amino-l ,3-Naphthalenedisulfonic Acid, Potassium Salt Technical Amino G Acid 7-Amino-l,3,6-Naphthalenetrisulfonic Acid, Disodium Salt Technical 2R Amino Acid 4- Amino-l ,3,5-Naphthaienetrisulfonic Acid, 4,5-Sultam, Trisodium Salt Technical Naphthasultam l-Amino-6-Naphthol Technical 5-Amino-2-naphthol l-Amino-7-Naphthol Technical 8-Amino-2-naphthol 1- Amino-6(and 7)-Naphthol Technical 5(and 8)-Amino-2-naphthol p-Aminophenol Technical 2- Amino-l-Phenol-4-Sulfonamide Technical 1 -(m-Aminophenyl)-3-Methyl-5-Pyrazolone Hydrochloride Technical 1- ( m-Aminophenyl)-5-Oxo-2-Pyrazoline-3-Carboxylic Acid Technical 2- Aminotoluene-5-Sulfonic Acid Technical 2-Aminotoluene-5-Sulfonic Acid, Sodium Salt Technical 4-Amino-m-toluenesulfonic acid, sodium salt OTMSA (o-Toluidine-m-sulfonic acid) 5- Amino-o-Toluenesulfonic Acid Technical p-Toluidine-o-sulfonic acid 5-Amino-2-(p-Toluidino)Benzenesulfonic Acid Technical p-Toluidine Nerol Acid 4-(4-Amino-m-Tolylazo)-m-Toluenesulfonic Acid Technical Aminoazotoluene sodium sulfonate Aniline-2,5-Disulfonic Acid Technical 2-Amino-p-benzenedisulfonic acid 1 -Anilino-4-Hydroxyanthraquinone Technical p-Anilinophenol Technical p-Hydroxydiphenylamine o-Anisidine Technical o-Anisidine S Technical o-Methoxyaniline o-Aminoanisole p-Anisidine T echnica! p-Methoxyaniline p-Aminoanisole o-Anisidinomethanesulfonic Acid, Sodium Salt Technical Methoxy omega sulfonic acid Anthraflavic Acid Technical 2,6-Dihydroxyanthraquinone Anthranilic Acid Technical o-Aminobenzoic acid 30 Powder Crystalline Powder Crystalline Powder Crystalline Powder Paste Aqueous Solution Powder Paste Aqueous Solution Solid Powder Solid Powder Crystalline Paste Paste Paste Powder Powder Paste Paste Paste Paste Paste Paste Liquid Liquid Cast Solid Paste Solid Solid Orchem D. & C. CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) Anthra( 1,9) Pyrazol-6(2H)-One Technical Crystalline Powder Pyrazolanthrone 1.5- Anthraquinonedisulfonic Acid, Disodium Salt Technical Crystalline Solid 1,8'Anthraquinonedisulfonic Acid, Disodium Salt Technical ' Solid 2.6- Anthraquinonedisulfonic Acid, Disodium Salt Technical Powder 1- Anthraquinonesulfonic Acid, Sodium Salt Technical Powder 2- Anthraquinonesulfonic Acid, Sodium Salt Dry Ground Technical Powder Silver Salt N,N'-l,5-Anthraquinonylenedianthranilic Acid Technical Amorphous Solid Violet BN Acid Anthraquinone l,l'-( l,5-Anthraquinonylenediimino)Dinaphth(2,3-c) Acridine-5,8,14( 13H)-Trione Technical Solid Anthrimide for Brown VR (l-Anthraquinonyl)-1,2-Hydrazinedisulfonic Acid, Disodium Salt Technical Crystalline Paste Anthrarufin Technical Powder 1,5-Dihydroxyanthraquinone 4',4"'-AZobis-4-Biphenylcarboxylic Acid, Disodium Salt Technical Solid ABC Salt 4-(4-Benzamido-l-Anthraquinonylamino)Naphfh(2,3-e) Acridine-5,8,14( 13H)-Trione Technical Anthrimide for Red Brown RB Powder l-Benzamido-5-Chloroanthraquinone Technical Benzanilide Technical 7H-Benz(de) Anfhracen-7-One Technical Benzanthrone o-Benzoylbenzoic Acid Technical (3,3'-Bi-7H-Benz(de) Anthracene)-7,7'-Dione Technical 13,13'-Dibenzanthronyl (4,4'-Bi-7H-Benz(de) Anthracene)-7,7'-Dione Technical 2,2,-Dibenzanthronyl (1,1 '-Binaphthalene)-8,8'-Dicarboxylic Acid Technical DINA Acid 1.4- Bis( 1-Anthraquinonylamino) Anthraquinone Technical Anthrimide for Brown RBT 1.5- Bis( 1-Anthraquinonylamino) Anthraquinone Technical Anthrimide for Yellow 3R 4,4'-Bis( Diethylamino) Benzophenone Technical Ethyl Ketone 4,4'-Bis( Dimethylamino) Benzhydrol Technical Michler's Hydrol Hydrol 4,4'-Bis( Dimethylamino) Benzophenone Technical Michler's Ketone 1.5- Bis(2,4-Dinitrophenoxy)-4,8-Dinitroanthraquinone Technical 4,8-Dinitrophenylether anthraquinone 1,4-Bis( 2,4,6-Triethylanilino) Anthraquinone Technical Milling Blue BL Base 3- Bromo-7H-Benz(de) Anthracen-7-One Technical Bromobenza nth rone 1 -Bromo-4-Methylaminoanthraquinone Technical 2-Bromo-3-Methylanthraquinone Technical o-(3-Bromo-p-Toluoyl) Benzoic Acid Technical 2-Bromo-1,3,5-Triethylbenzene Technical p-Butylaniline Technical 2-tert-Butylanthraquinone Technical N,N'-Carbonybis(4-Methoxymetanilic Acid), Disodium Salt Technical 4-Methoxymetanilic acid urea Crystalline Powder Crystalline Solid Amorphous Solid Solid Crystalline Powder Amorphous Solid Crystalline Powder Powder Powder Granular Solid Paste Solid Paste Powder Paste Crystalline Powder Crystalline Powder Solid Liquid Liquid Crystalline Solid Crystalline Paste Orchem D. & C. 31 DUP210011176 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) Chicago Acid Dry Technical Chicago Acid Paste Technical 8-Amino-l-naphthol-5,7-disulfonic acid, sodium salt 4-Chloro-2-Aminobenzoic Acid Technical 4- Chloroanthranilic acid 2-Chloro-4-Aminotoluene Technical 3-Chloro-p-toluidine (NH2=1) 4-Chloro-2-Aminotoluene Technical 5-Chloro-o-toluidine (NH2=1) 6-Ch loro-2-Ami notoluene Technical 3-Chloro-o-toiuidine (NH2=1) m-Chloroaniline S2 Technical 0- Chloroaniline Technical Chloroanilines Mixed C Technical o(and p)-Chloroaniline p-Chloroaniline S2 Technical p-Chloroaniline S2 Flaked Technical 1- Chloroanthraquinone Technical Chlorobenzene Technical MCB (Monochlorobenzene) 0- ( p-Chlorobenzoyl) Benzoic Acid Technical 2- Chloro-N,N-Diethyl-4-Nitroaniline Technical 4-Chlorometanilic Acid Technical 3- Amino-4-chlorobenzenesulfonic acid 2-Chloro-4-Nitroaniline Dry Technical 2-Chloro-4-Nitroaniline Paste Technical OCPNA (Ortho-chloro-para-nitroaniline) 4-Chloro-2-Nitroaniline Technical PCONA (Para-chloro-ortho-nitroaniline) 1- Chloro-5-Nitroanthraquinone Technical 1- Chloro-8-Nitroanthraquinone Technical 4-Chloro-3-Nitrobenzenesulfonamide Technical o-Nitrochlorobenzene-p-sulfonamide 2- Chloro-5-Nitrobenzenesulfonic Acid,Sodium Salt Technical p-Nitrochlorobenzene-o-sulfonic acid 4-Chloro-2-Nitrophenol Technical 2-Chloro-4-Nitrotoluene Technical 4-Chloro-2-Nitrotoluene Technical 4(and 6)-Chloro-2-Nitrotoluene Technical 6-Chloro-2-Nitrotoluene Technical 2-Chloro-6-nitrotoluene 4-Chlorophthalic Acid Technical 6-Chloroquinaldine Technical 6'-Chloroquinophthalone Technical 1- (2-Chloro-5-Sulfophenyi)-3-Methyl-5-Pyrazolone Technical 4-Chloro-3-methyl-5-oxo-2-pyrazolin-1-yl)benzene-sulfonic acid 2- Chloro-p-Xylene Technical Chrysazin Technical 1,8-Dihydroxyanthraquinone Cleve's Acid 1,6 Technical 5- Amino-2-naphthalenesulfonic acid Cleve's Acid 1,7 Technical 8-Amino-2-naphthalenesu!fonic add, sodium salt Cleve's Acid Mixed Technical 5(and 8)-Amino-2-naphthalenesulfonic acid 32 Powder Paste Powder Liquid Fused Solid or Liquid Liquid Liquid Liquid Liquid Cast Solid Flakes Solid Liquid Solid Liquid Paste Powder Paste Powder Paste Paste Paste Paste Paste Cast Solid Crystalline Solid Solid Crystalline Solid Paste Semi-solid Solid Granular Paste Liquid Crystalline Powder Crystalline Powder Crystalline Solid Crystalline Solid Orchem D. & C. DUP210011177 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) Cresidine Technical 5-Methyl-o-anisidine (NH2 = 1) 2-Amino-4-methylanisole (CH3O = 1) 3-Amino-4-methoxytoluene 8-Cyano-l-Naphthalenesulfonic Acid, Sodium Sail Technical Dehydrothio-p-Toluidine Technical 2-(p-Aminophenyl)-6-methylbenzothiazole Dehvdrothio-p-Toluidinesulfonic Acid Technical 2-(p-Anninophenyl)-6-methyl-7-benzothiazolesulfonic acid 1.5- Diaminoanthraquinone Technical 2.6- Diaminoanthraquinone Technical 4.8- Diaminoanthrarufm Technical 4,8-Diamino-l/5-dihydroxyanthraquinone 1.4- Diamino-2,3-Dichloroanthraquinone Technical 1.4- Diamino-2,3-Dihydroanthraquinone Technical Leuco-l,4-diaminoanthraquinone Acetate Leuco Violet 3.6- Diamino-2,7-Dimethylacridine Technical Acridine Yellow Base 3,6-Diamino-2,7-Dimethylacridine Sulfate Technical Acridine Yellow Sulfate 4,4'-Diamino-2,2'-Stilbenedisuifonic Acid Technical o-Dianisidine Dry Technical o-Dianisidine Paste Technical 3,3'-Dimethoxybenzidine 1.5- Dibenzamidoanthraquinone Technical 4,5'-Dibenzamido-l,l'-lminodianthraquinone Technical Anthrimide for Brown AR N,N-Dibenzylaniline Technical N-Phenyldibenzylamine 3.9- Dibromo-7H-Benz(de) Anthracen-7-One Technical Dibromobenza nth rone Dibromo-8,16-Pyranthrenedione Technical 2.5- Dichloroaniline Flaked Technical 3.4- Dichloroaniline S2 Technical 2.5- Dichioroaniline-4-Sulfonic Acid Technical 2.5-Dichlorosulfanilic acid 1.5- Dichloroanthraquinone Technical l,5(and l,8)-Dichloroanthraquinone Technical 2.6- Dichlorobenzal Chloride Technical alpha, alpha, 2,6-Tetrachlorotoluene N,N'-(2,5-Dichloro-3,6-Dioxo-p-Phenylene) Bis(6-( 2(3H)-Oxo-5-Benzimidazolylamino) Metanilic Acid) Technical Dioxazine Blue Base 2.5- Dichioro-4-(3-Methyl-5-Oxo-2-Pyrazolin-l-yl) Benzenesulfonic Acid Technical (Dichlorosulfophenyl)methylpyrazolone 2.6- Dichloro-4-Nitroaniline Technical 3.4- Dichloronitrobenzene Technical 1,2-Dichloro-4-nitrobenzene 1.4- Dichloro-2-Nitrobenzene Technical 2.5-Dichloronitrobenzene 2.6- Dichlorotoluene Technical 2-Diethylaminoethyl Methacrylate MS Technical N,N-Diethyl-m-Aminophenol Technical m-Diethylaminophenol 33 Flakes Paste Coarse Powder Paste Crystalline Solid Powder Crystalline Solid Crystalline Powder Crystalline Solid Powder Powder Paste Powder Powder Crystalline Solid Powder Powder Flakes Cast Solid Paste Crystalline Solid Crystalline Solid Liquid Lumps Paste Powder Crystalline Solid Crystalline Solid Liquid Liquid Crystalline Solid Orchem D. & C. DUP210011178 r CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) N,N-Diethylaniline Technical N,N-Diethylcydohexylamine Technical N,N-Diethylmetanilic Acid, Sodium Salt Technical Dielhylaniline-m-sulfonic acid N,N-Diethyl -o-Naphthylamine Technical N,N-Diethyl-m-Toluidine Technical 2.3- Dihydro-l ,4-Bis(Methylamino) Anthraquinone Technical Leuco-1,4-dimethyldiaminoanthraquinone Dihydroxyviolanthrone Technical Dihydroxydibenzanthrone 1.3- Dimethoxybenzene Technical N,N-Dimethylaniline Technical 2,2'-Dimethyl-l, 1-Bianthraquinone Technical m-Dinitrobenzene 89 Technical 3,5-Dinitrobenzoic Acid Technical Dinitro-(3,3'-Bi-7H~Benz(de) Anthracene)-7,7'-Dione Technical Dinitrodibenzanthronyl 2.4- Dinitrochlorobenzene Technical 1 -Chloro-2,4-dinitrobenzene 2,4(and 2,6)-Dinitrochlorobenzene Technical Dinitrochrysazin Technical Dinitro- ~\ ,8-dihydroxya nth ra qui none 4.5- Dinitro-2,7-Chrysazindisulfonic Acid, Disodium Salt Technical 2.4- Dinitro-4'-Hydroxydiphenylamine Technical p-(2,4-Dinitroanilino) phenol Para Base 2.4- Diniirophenol Technical 4,4'-Dinitro-2,2'-Stilbenedisulfonic Acid, Disodium Salt Technical 2.4- Dinitrotoluene Technical Dinitrotoluene Mixture Technical Di-o-Tolylguanidine Technical Di-o-Tolythiourea Technical 2,2'-Dimethylthiocarbanilide DPI-7 Eutectic Curing Agent 6-Ethoxy'2-Mercaptobenzothiazole Technical Orange Thiazole 2-Ethoxy-ft-Naphthylamine Technical 2- Ethoxy-a-Nitronaphthalene Technical 3- Ethylamino-p-Cresol Paste Technical 3-Ethylamino-p-Toluenesulfonic Acid Technical Ethyl-o-toluidine-p-sulfonic acid N-Ethylaniline Technical alpha-(N-Ethylanilino)-m-Toluenesulfonic Acid Technical Ethylbenzylaniline sulfonic acid N-Ethyl-N-Benzylaniline Technical N-Ethyl-N-phenylbenzylamine N-Ethyl-N-Benzyl-m-Toluidine Technical N-Benzyl-N-ethyl-m-toluidine N-Ethyl-alpha-Naphthylamine Technical N-Ethyl-m-Toluidine Technical N-Ethyl-o-Toluidine Technical alpha-(N-Ethyl-m-Toluidino)-m-Toluenesulfonic Acid Technical Ethylbenzyl-m-toluidinesulfonic acid 34 Liquid Liquid Granular Solid Liquid Liqjid Crystalline Powder Solid Liquid Liquid' Powder Wet Crystalline Solid Paste Powder Fused Solid Fused Solid Coarse Solid Paste Crystalline Paste Crystalline Paste Crystalline Paste Crystalline Solid Cast Solid Powder Powder Liquid Crushed Solid Cast Solid Paste Paste Granular Solid Liquid Granular Paste Liquid Liquid Liquid Liquid Liquid Granular Solid Orchem D. & C. DUP210011179 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) F Salt Technical 2-Naphthol-7-sulfonic acid, sodium salt Formaniline Technical N-Methyleneaniline G Salt Technical 2-Naphthol-6,8-disulfonic acid, dipotassium salt Gamma Acid Dry Technical Gamma Acid Paste Technical 7- Amino-l -naphthol-3-sulfonic acid H Acid Technical 8-Amino-1 -naphthol-3,6-disulfonic acid, sodium salt Homophthalic Acid Technical a-Carboxy-o-toluic acid 1 -Hydroxy-4-(alpha-Hydroxy-m-Toiuidino) Anthraquinone Technical N-(7-Hydroxy-l-Naphthyl)acetamide Technical l-Acetylamino-7-naphthol 1 -Hydroxy-4-p-To!uidinoanthraquinone Technical Iris R Base l,1'-lminobis(4-Aminoanthraquinone) Technical 4.4-Diamino-1,l-dianthrimide 1 ,l'-lminobis(4-Nitroanthraquinone) Technical 4.4-Dinitro-l,l-dianthrimide 1 ,l'-lminodianthraquinone Technical 1,1-Dianthrimide 1,3-lscquinolinediol Technical Homophthalimide (Tautomeric Form) Isoviolanthrone Technical Isodibenza nth rone J Acid Dry Technical J Acid Paste Technical 6-Amino-l-naphthol-3-sulfonic acid J Acid Urea Technical 6,6'-Ureylenebis(l-naphthol-3-sulfonic acid) Koch Acid Technical 8-Amino-1,3,6-naphthalenetrisuifonic acid, disodium salt Laurent's Acid Technical 5-Amino-l-naphthalenesulfonic acid 4-Methoxymetanilic Acid Technical 3- Amino-4-Methoxybenzene sulfonic acid 1-Methylaminoanthraquinone Technical N-Methylaniline Technical 3- ( N-Methylanilino) Propionitrile Technical Cyanoethyl methyl aniline 1- (3-Methyl-2-Anthraquinonylamino)-5-(7-Oxo-7H-Benz(de) Anthracen-3-Ylamino)- Anthraquinone Technical Anthrimide for Gray R N-Methylcyelohexylamine Technical p,p'-Methylenebis( N,N-Dimethylaniline) Technical Methylene Base Methane Base N-Methylglucamine Technical 4- Methyl-2-Nitroanisole Technical Nitrocresol methyl ether 2- Methyl-l-Nitroanthraquinone Technical 1,5-Naphthalenedisulfonic Acid, Disodium Salt Technical 35 Paste Powder Crystalline Paste Powder Paste Paste Granular Paste Powder Crystalline Solid Paste Powder Crystalline Solid Amorphous Powder Powder Paste Crystalline Powder Liquid Liquid Solid Liquid Granular Solid Crystalline Powder Cast Solid or Liquid Paste Paste Orchem D. & C. DUP210011180 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) 2,7-Naphthalenedisulfonic Acid, Disodium Salt Technical o-Naphthionic Acid Technical 1 -Amino-2-naphthalenesulfonic acid aipha-Naphthoi Technical Naphthostyril Technical 8-Amino-l-naphthoic lactam Benz-(c,d)-indol-2(l H)-one 2(lH)-peri Naphthazobne alpha-Naphthylamine Technical ecnmcai 1-Naphthol-4-sulfonic acid, sodium salt 1,4-Hydroxy Acid 2'-Nitro-p-Acetanisidide Technical 3-Nitro-4-Aminoanisoie Technical (CH30 = 1) 2-Nitro-p-anisidine (NH2 = 1) 5-Nitro-2-Aminoanisole Technical (CH30 = 1) 4-Nitro-o-anisidine (NH2 = 1) 4-Nitro-2-Aminophenol Technical 2 Amino-4-nitrophenol 4-Nitro-2-Aminotoluene Technical 5-Nitro-o-toluidine (NH2 = 1) m-Nitroaniline Technical 4-Nitroaniline-2-Sulfonic Acid Technical 2-Amino-5-nitrobenzenesulfonic acid p-Nitroaniline-o-sulfonic acid (PNAOSA) 0-Nitroanisole Technical p-Nitroanisole Technical 1-Nitro-2-Anthraquinonecarboxylic Acid Technical 6-( p-( p-Nitrobenzamido) Benzamido) -! -Naphfhol-3-Su Ifor.ic Acid Technical p-Nitrobenzoyl PAB J Acid 6-(p-Nitrobenzamido) -l-Naphthol-3-Sulfonic Acid Technical p-Nitrobenzoyl J Acid 5-Nitro-2(3H)-Benzimidazolone Technical p-Nitrobenzoic Acid Technical 4'-Nitro-4-Biphenylcarboxylic Acid, Sodium Salt Technical NPB Salt o-Nitrochlorobenzene Technical 1 -Chloro-2-nitrobenzene p-Nitrochlorobenzene Technical 1 -Chloro-4-nitrobenzene 2-Nitro-p-Cresol Technical alpha-Nitronaphthalene Technical 7(and 8)-Nitronaphth( 1,2)-Oxadiazole-5-Sulfonic Acid Technical Nitrodiazo-1,2,4-hydroxy odd 4'-Nitrooxanilic Acid Technical N-Oxalyl-p-nitroaniline p-Nitrophenetole Technical 0-Nitrophenoi Technical p-Nitrophenol Technical 4-Nitro-o-Phenylenediamine Technical 1-(m-Nitrophenyl)-3-Methyl-5-Pyrazolone Technical l-( m-Nitrophenyl)-5-Oxo-2-Pyrazoline-3-Carboxylic Acid Technical 4-Nitrophthalimide Technical p-Nitro Sodium Phenolate Technical 36 Paste Powder Flakes Solid Flakes Paste Paste Powder Powder Crystalline Paste Powder Crystalline Powder Crystalline Paste Liquid Solid Solid Paste Paste Crystalline Paste Crystalline Solid Paste Cast Solid Flakes Cast Solid or Liquid Flakes Paste Powder Solid Crushed Solid Fla kes Paste Paste Paste Paste Crystalline Paste Orchem D. & C. DUP210011181 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) p-Nitrosophenol Technical p-Benzoquinone, monooxime (Tautomeric Form) m-Nitrotoluene Technical 0- Nitrotoluene Technical p-Nitrotoluene Technical Nitrotoluenes Mixed o-m-p Technical 4-Nitrotoluene-2-Sulfonic Acid Technical 5-Nitro-o-toluenesulfonic acid Para A^rjrj N-Oxalyl-p-Phenylenediamine Technical 4,-Aminooxanilic acid 1- ( 7-Oxo-7H-Benz(de) Anthracen-3-Ylamino) Anthraquinone Technical Anthrimide for Greer 2BL 1,1 '-(7-Oxo-7H-Benz(de) Anthracen-3,9-Ylendeiimino) Dianthraquinone Technical Anthrimide for Olive T or TR Pentachlorobenzenethiol Technical Pentachlorothiophenol Peri Acid Dry Technical Peri Acid Paste Technical 8-Amino-1 -naphthalenesulfonic acid p-Phenetidine Technical p-Ethoxyaniline m-Phenylenediamine Technical l,3-Phenylenediamine-4-Sulfonic Acid Technical 2.4- Diaminobenzenesulfonic acid 2,2'-Phenyliminodiethanol Technical Phenyl diethanolamine N,N-Bis(2-hydroxyethyl)aniline Diethanolaniline N-Phenyl Gamma Acid Dry Technical N-Phenyl Gamma Acid Paste Technical 7- Anilino-l-naphthol-3-sulfonic acid N-Phenyl J Acid Technical 6-Anilino-l-naphthol-3-sulfonic acid 1 -Phenyl-3-Methyl-5-Pyrazolone Technical N-Phenyl-alpha-Naphthylamine Technical N-Phenyl-beta-Naphthylamine Technical N-Phenyl Peri Acid Technical 8- Aniliro-l-naphthalenesulfonic acid, ammonium salt Picric Acid P Picric Acid Technical 2,4,6-Trinitrophenol Piperidine Technical Primuline Fusion Mass 220 Technical Primuline Fusion Mass 240 Technical Primuline Fusion Mass 270 Technical 2'-(p-Aminophenyl)-6-methyl-2,6'-bibenzothiazoie Quinaldine C Technical 2-Methylquinoline Quinizarin Technical 1.4- Dihydroxyanthraquinone 2,4-Quinolinediol Technical 2.4- Dihydroxyquinoline Quinophthalone Technical 2-(2-Quinolyl)-l ,3-indandione 37 Paste Liquid Liquid Flakes Liquid Crystalline Paste Paste Powder Powder Powder Powder Paste Liquid Flakes Crystalline Paste Solid Granular Solid Paste Paste Granular Solid Pellets Powder Paste Crystalline Paste Crystalline Paste Liquid Powder Powder Powder Liquid Solid Paste Solid Orchem D. & C. i I I DUP210011182 CHEMICAL INTERMEDIATES CHEMICAL INTERMEDIATES (Cont.) 2R Acid Technical 7-Amino-l-naphthol-3,6-disulfonic acid, sodium salt Rhoduline Acid Technical 6,6'-lminobis (l-naphthol-3-sulfonic acid) Sodium Metanilate Technical Metanilic acid, sodium salt m-Aminobenzenesulfonic acid, sodium salt Sodium Naphthionate Technical Naphiniomc. acid, sodium salt 4-Amino-1 -naphthalenesulfonic acid, sodium salt Sodium Picramate Technical Picramic acid, sodium salt 2-Amino-4,6-dinitrophenol, sodium salt 0-(p-Sulfobenzoyl)Benzoic Acid, Disodium Salt Technical 1-(p-Sulfophenyl-3-Methyl-5-Pyrazolone Dry Technical l-(p-Sulfophenyl)-3-Methyl-5-Pyrazolone Paste Technical p-(3-Methyl-5-oxo-2-pyrazolin-l-yl)benzenesulfonic acid 1,4,5,8-Tetrachloroanthraquinone C Technical 3,3'-Thiodi-7H-Benz(de) Anthracen-7-One Technical Dibenzanthronyl Sulfide o-Tolidine Base Dry Technical o-Tolidine Base Paste Technical 3,3'-Di methyl benzidine o-Tolidine Hydrochloride Technical 3,3'-Di methyl benzidine dihydrochloride m-Toluidine Technical o-Toluidine Technical o-Toluidine S2 Technical p-Toluidine Cast Technical p-Toluidine Cast S Technical p-Toluidine Flaked Technical o-(p-Toluoyl)Benzoic Acid Technical 2.4-Tolylenediamine Technical 'Toluene-2,4-diamine 1,3,5-Triethylbenzene Technical 1.3.3-Trimethyl-A2,"-lndolineacetaldehyde Technical Fischer's Aldehyde 1.3.3-Trimethyl-2-Methyleneindoline Technical Fischer's Base Violanthrone Technical Dibenzanthrone 2.4-Xylidine P Technical m-xylidine 2.4-Dimethylaniline 2.4-Xylidine-5-Sulfonic Acid Technical 2,4{and 2,6)-Xylidine Technical 2.5-Xylidine Technical p-Xylidine 2.5-Dimethylaniline Xylidi nes Mixed o-m-p Technical Paste Paste Powder Powder Crystalline Paste Powder Crystalline Powder Crystalline Paste Powder Powder Powder Crystalline Paste Paste Liquid Liquid Liquid Cast Solid Cast Solid Fla kes Crystalline Solid Crystalline Solid Liquid Granular Paste Liquid Amorphous Powder Liquid Paste Liquid Liquid Liquid Orchem D. & C. DUP210011183 CHEMICAL-CHLOROANILINE CHEMICAL PEPTIZERS FOR NATURAL AND SYNTHETIC RUBBER: Endor Rubber Peptizing Agent: Activated zinc salt of pentachlorothiophenol--(C6Ci5S)2Zn and inert filler. Grayish-green powder; Sp. Gr. 2.38. USE: A peptizing agent for plasticizing natural rubber and all types of SBR (styrene butadiene rubber). CONTAINERS: 100-lb. drums. Elastomers RPA No. 2: 2-naphthalenethiol--C,0H7SH with an inert wax. Light cream-colored, waxy flakes; Sp. Gr. 0.92. USE: A peptizing agent for natural rubber and SBR. CONTAINERS: 50-lb. boxes. Elastomers RPA No. 3: 36% xylenethiols- -(CH3)2C6H3SH in an inert hydrocarbon. Amber liquid; Sp. Gr. 0.90. USE: A peptizing agent for natural and synthetic rubber; a reclaiming agent. CONTAINERS: 400-lb. drums. Elastomers RPA No. 3 Cone.: 71% xylenethiols--(CH3)2C6H3SH and 29% petroleum oil. Dark amber liquid; Sp. Gr. 1.00. USE: A peptizing agent for natural and syn thetic rubber; a rubber reclaiming agent. CONTAINERS: 450-lb. drums. Elastomers RPA No. 6: Pentachlorothiophenol--C6CI5SH. A light gray powder; Sp. Gr. 1.83. USE: A peptizing agent for natural rubber and SBR. CONTAINERS: 100-lb. drums. Elastomers RR-10: Mixed dixylyl disulfides--[(CH3)2C6H3 ]S2. Dark amber liquid; Sp. Gr. 1.03: USE: An agent for ac celerating devulcanization of natural rubber, SBR (styrene butadiene rubber) and mixed scrap during the reclaiming process. CONTAINERS: 450-lb. drums. Elastomers CHEMICAL RESISTANT FINISHES: See Finishes, Trade Sales (Consumer Products), page 77. CHEMICALS, LEATHER: See Alkanol, page 6; Avitone, page 21; Duponol, page 52; Merpentine, page 701; Merpol, page 707; and MethacrolTM, page 702. onol, page 52; Merpol, page 101; MethacrolTM, page 102; Nalan, page 105; Shirlan, page 140; Zelan, page 164; Ze/con, page 164; Ze/ec, page 164; Zepel, page 164; and Zeset, page 165. CHICAGO ACID DRY TECHNICAL: 8-Amino-l-naph- thol-5,7-disulfonic acid, sodium salt. Powder form,- a Chemical Intermediate. Orchem D. & C. CHICAGO ACID PASTE TECHNICAL: 8-Amino-l- naphthol-5,7-disulfonic acid, sodium salt. Paste form; a Chemical Intermediate. Orchem D. & C. CHLORDANE DUST: See Lawn and Garden Products, page 97. CHLORIDES Aluminum: See Aluminum Chloride, page 7. Ammonium: See Ammonium Chloride, page 7 7. Hydrogen: See Acids, Hydrochloric Acid, page 3. Methacrylato chromic: See Vo/an Bonding Agent, page 767. Methyl: See Methyl Chloride, page 103. Methylene: See Methylene Chloride, page 104. Methylene, Aerosol Grade: See Freon--Other Products, page 88. Zinc: See Zinc Chloride, page 165. Zinc Ammonium: See Fluxes, Galvanizing, Zac/on, page 84. . 4-CHLORO-2-AMINOBENZOIC ACID TECHNICAL: 4-Chloroanthranilic acid. Powder form; a Chemical Intermediate. Orchem D. & C. 2-CHLORO-4-AMINOTOLUENE TECHNICAL: 3-Chloro p-toluidine (NH2=7). Liquid form; a Chemical Intermediate. Orchem D. & C. CHEMICALS, PAPER: See Alkanol, page 6; Avlfex, page 27; Avitone, page 21; Chlarostain N, page 53; Duponol, page 52; Zepar, page 164; and Zoron, page 165. CHEMICALS, PHOTOGRAPHIC: See Photographic Products, page 121. CHEMICALS, SURPLUS: See Surplus Materials, page 146. CHEMICALS, TEXTILE: See Alkanol, page 6; Aridex, page 76; Avitex, page 21; Avitone, page 21; Dup 4-CHLORO-2-AM1NOTOLUENE TECHNICAL: 5 Chloro o-toluidine (NH2=1). Fused solid or liquid forms; a Chemical Intermediate. Orchem D. & C. 6-CHLORO-2-AM1NOTOLUENE TECHNICAL: 3-Chloro- o-toluidine (NH2=7). Liquid form; a Chemical Intermediate. Orchem D. & C. m-CHLOROANILINE S2 TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. o-CHLOROANILINE TECHNICAL: Liquid form; a Chem ical Intermediate. Orchem D. & C. 39 DUP210011184 r CHLOROANILINE-CHLORO o(AND p)-CHLOROANILINE: Sold as Chloroanilines Mixed C Technical, a Chemical Intermediate. Orehem D. & C. p-CHLORO ANILINE S2 FLAKED TECHNICAL: Flake Chemical Intermediate. Orehem D. & C. p-CHLOROANILINE S2 FLAKED TECHNICAL. Flake form; a Chemical Intermediate. Orehem D. & C. l.nLUKVJMriiLi[NC3 miwcu c. iconmoHL: o(ana p Chloroaniline. Liquid form; a Chemical Intermediate. Orehem D. & C. 4-CHLOROANTHRANILIC ACID: Sold as 4-Chloro-2- aminobenzoic acid Technical, a Chemical Inter mediate. Orehem D. & C. 1-CHLOROANTHRAQUINONE TECHNICAL: Solid form; a Chemical Intermediate. Orehem D. & C. CHLOROBENZENE TECHNICAL: MCB (Monochloro benzene). Liquid form; a Chemical Intermediate. Orehem D. & C. o-(p-CHLOROBENZOYL)BENZOIC ACID TECHNICAL: Solid form; a Chemical Intermediate. Orehem D. & C. 2-CHLORO BUTADIENE-1,3: See Synthetic Rubber, Neoprene, page 147. 2-CHLORO-N,N-DIETHYL-4-NITROANIL!NE TECH NICAL: Liqu id form; a Chemical Intermediate. Orehem D. & C. 7,1,1-CHLORODIFLUOROETHANE-. See Freon--Other Products, page 88. CHLOROD1FLUOROMETHANE: See Freon Products, Freon-22, page 86. 1 -CHLORO-2,4-DINITROBENZENE: Sold as 2,4-Di- nitrochlorobenzene Technical, a Chemical Inter mediate. Orehem D. & C. CHLOROFLUOROCARBONS: See Freon, Products, page 85. CHLOROFORM (TRICHLOROMETHANE)--CHCI3: A colorless, sweet-smelling liquid; soluble in alcohol and ether; slightly soluble in water. Available in two grades. CONTAINERS: 55-gal. (660 lb.) drums, tank trucks and tank cars. Electrochem. Hydrocarbon Stabilized Grade: Boiling range 140.7-142.5F (60.4-61.4C.). Weight per gal., 12.43 lb. at 20C. USE: As a solvent for fats, oils and other organic compounds,- for spotting textiles; as a freezing-point depressant for fire-extinguisher fluids; in the manufacture of dyes and chemicals, e.g., difluorochloromethane. Ethanol Stabilized Grade: Boiling range, 20th drop 139.1F. (59.5C.) min.; 95% 142.7F. (61.5 C.). Weight per gal., 12.375 lb. at 20C. USE: As a solvent for fats, oils and other organic compounds; in the manufacture of chemicals, dyes and pharmaceuticals. 4-CHLOROMETANILIC ACID TECHNICAL: 3-Amino- 4-chlorobenzenesulfonic acid. Paste form; a Chem ical Intermediate. Orehem D. & C. CHLOROMETHANE: See Methyi Chloride, page 103. 4-CHLORO-3-(3-METHYL-5-OXQ-2-PYR AZOLIN1-YL)BENZENESULFONIC ACID: Sold as 1(2Chloro-5-sulfophe ny I)-3-methyl-5-pyrazolone Technical, a Chemical Intermediate. Orehem D. & C. 2-CHLORO-4-NITROANILINE DRY TECHNICAL: OCPNA (Ortho-chloro-para-nitroaniline). Powder form; a Chemical Intermediate. Orehem D. & C. 2-CKLORO-4-N1TRO ANILINE PASTE TECHNICAL: OCPNA (Ortho-chloro-para-nitroaniline). Paste form,- a Chemical Intermediate. Orehem D. & C. 4-CHLORO-2-NITROANILINE TECHNICAL: PCONA (Para-chloro-ortho-nitroaniline). Powder form; a Chemical Intermediate. Orehem D. & C. 1-CHLORO-5-NITROANTHRAQUINONE TECHNICAL: Paste form; a Chemical Intermediate. Orehem D. & C. 1-CHLORO-8-NITROANTHRAQUINONE TECHNICAL: Paste form; a Chemical Intermediate. Orehem D. & C. 1- CHLORO-2-NITROBENZENE: Sold as o-Nitrochlorobenzene Technical, a Chemical Intermediate. Orehem D. & C. 1 -CHLORO-4-NITROBENZENE: Sold as p-Nitrochlorobenzene Technical, a Chemical Intermediate. Orehem D. & C. 4-CHLORO-3-NITROBENZENESULFONAMIDE TECH NICAL: o-Nitrochlorobenzene-p-sulfonamide. Paste form; a Chemical Intermediate. Orehem D. & C. 2- CHLORO-5-NiTROBENZENESULFONIC ACID, SODIUM SALT TECHNICAL: p-Nitrochlorobenzeneo-sulfonic acid. Paste form,- a Chemical Intermediate. Orehem D. & C. 4-CHLORO-2-NITROPHENOL TECHNICAL: Paste form; a Chemical Intermediate. Orehem D. & C. 2-CHLORO-4-NITROTOLUENE TECHNICAL: Cast solid form; a Chemical Intermediate. Orehem D. & C. DUP210011185 CHLORO-CLEANERS 2- CHLORO-6-NITROTOLUENE: Sold as 6-Chioro-2nitratoluene Technical, a Chemical Intermediate. Orchem D. & C. 4-CHLORO-2-NITROTOLUENE TECHNICAL: Crystalline solid form; a Chemical Intermediate. Orchem D. & C. 4(AND 6}-CHLORO-2-NITROTOLUENE TECHNICAL: Solid form; a Chemical Intermediate. Orchem D, & C. 6-CHLORO-2-NITROTOLUENE TECHNICAL: 2-Chloro- 6-nitrotoluene. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. CHLOROPENTAFLUOROETHANE: See Freon Products, Freon-115, page 87. 3- ( p-CHLOROPHENYL)-l ,1 -DIMETHYLUREAfMONURON): See Weed and Brush Killers, Telvar, page 162. 4- CHLOROPHTHALIC ACID TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. CHLOROPRENE: See Synthetic Rubber, Neoprene, page 147. 6-CHLOROQUINALDINE TECHNICAL: Semi-solid form; a Chemical Intermediate. Orchem D. & C. 6-CHLOROQUINOPHTHALONE TECHNICAL: Solid form; a Chemical Intermediate. Orchem D. & C. CHLOROSTAINTM N,N BASE, WR. See Dyes, page 53. CHLOROSULFONATED POLYETHYLENE: See Synthetic Rubber, Hypalon, page 147. CHLOROSULFONIC ACID: See Acids, page 3. l-(2-CHLORO-5-SULFOPHENYL) 3-METHYL-5PYRAZOLONE TECHNICAL: 4-Chloro-3-methyl-5oxo-2-pyrazolin-l-yl)benzene-sulfonic acid. Granu lar paste form; a Chemical Intermediate. Orchem D. & C. 3-CHLORO-o-TOLUIDINE (NH2=1). Sold as 6- Chloro-2-aminotoluene Technical, a Chemical Inter mediate. Orchem D. & C. CHROMACYL DYES: See Dyes, page 53. CHROMATED ZINC CHLORIDE: See CZC Chromated Zinc Chloride-Technical, page 46. CHROME AND METAL POLISH: See Automotive Spe cialties 7 Products, page 18. CHROME COMPLEXES: A group of Werner type chro mium complexes of carboxy acids in isopropanol. Now available are the complexes of the following acids: amino-acetic, p-aminobenzoic, cyanoacetic, p-nitro- benzoic, beta-resorcylic, tannic, mercaptoacetic, hy- droxyacetic, gluconic and trichloroacetic. Others can be made available. (See also Quilon chrome complex, page 132, and Volan bonding agent, page 161.) USE: For changing the surface characteristics of materials such as glass, natural or synthetic fibers, metal oxides, wood and paper; to serve as anchoring agents for resins and other polymers; as absorbers of ultraviolet light; as anti static agents and many other possibilities. CONTAINERS: 15- and 53-gai. P.E.-lined drums. Ind.&Bio.-Ind. CHROME PIGMENTS: See Pigment Colors, page 124. CHRYSAZIN TECHNICAL: 1,8-Dihydroxyanthraquinone. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. CIRCULAR SAWS: See Tools, Construction and Indus trial, page 754. CLAD METAL: Explosively bonded clad plate products are produced by the Explosives Department without the use of intermediate bonding agents or the application of heat. The versatility of explosive bonding permits manu facture of a wide variety of clad plate products, ranging from combinations of more conventional metals and al loys such as stainless steel or nickel on carbon steel, to special grades of stainless steel on alloy steels, to re fractory or noble metals on steel, stainless steel or other metals or alloys. Available in quantities and sizes re quired for use in fabrication of industrial process equip ment. Explo.-E.P.S. CLEANER, FLOOR: See Professional Floor Maintenance Products, page 131. 5- CHLORO-o-TOLUlDINE (NH2=1). Sold as 4- Chloro-2-aminotoluene Technical, a Chemical Inter mediate. Orchem D. & C. CLEANERS: 3-CHLORO-p-TOLUIDINE (NH2=1). Sold as 2- Chloro-4-aminotoluene Technical, a Chemical Inter mediate. Orchem D. & C. CHLOROTRIFLUOROMETHANE: See Freon Products, Freon-13, page 86. (Also See Alkanol, page 6 and Duponol, page 52). Aluminum: See Automotive Specialties 7 Products, page 18. Automotive: See Automotive Specialties 7 Products, page 18. 2-CHLORO-p-XYLENE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. Engine: See Automotive Specialties 7 Products, page 19. ii ; DUP210011186 CLEANERS-COATED CLEANERS (Cont.) Freon; See Freon Products, page 85. Prep-Sol: See Finishes, Refinish, page 73. Speedy: See Automotive Specialties 7 Products, page 20. Spray Gun and Equipment: See Finishes, Refinish, page 73. CLEANING FLUIDS: See Freon Products, page 85; Perchlorethylene, page 110; Trichlorethylene, page 158; Vo/c/ene, page 160. CLEARS: See Finishes, Automotive, page 68; Finishes, Refmish, page 71. CLEVE'S ACID 1,6 TECHNICAL: 5-Amino-2-naph- thalenesulfonic acid. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. CLEVE'S ACID 1,7 TECHNICAL: 8-Amino-2-naph- thalenesulfonic acid, sodium salt. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. CLEVE'S ACID MIXED TECHNICAL: 5(and 8)-Amino- 2-naphthalenesulfonic acid. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. CLOTH, BOOK: See Coated Fabrics, PX Book Cloth, below. CLYSAR POLYOLEFIN FILM: See Film, Clysar Poly olefin film, page 66. CMTM FLAME RETARDANT: Fine, white, granular com position based on ammonium sulfamate and modified to prevent afterglow and to improve penetration. Soluble in water; insoluble in the common dry cleaning solvents. (See Ammonium Sulfamate, page 11 and X-12 Flame Retardant, page 164.) USE: In flame retardant treatment of fabrics, paper, paper products and other cellulosic materials. CONTAINERS: 50-lb. fiber drums and 100-lb. paper bags. Ind.&Bio.-Ind. CMC: See Sodium CMC, page 142; Qualex Refined Sodium CMC, page 132. COATED FABRICS: Pyroxylin Coated and Impregnated Fabrikoid Pyroxylin Coated Fabrics: The fabrics are processed with pyroxylin to produce water re sistant, soap-and-water-washable materials for ap plications which do not require the resistance to flex ing given by vinyl coated fabrics. Bindings and welts Bookbinding Card table covers Case coverings Draw sheet: For newspaper printing presses Footwear: For strapping in certain types of women's shoes and slippers and for sock lining Hat sweats Luggage lining Paper machine aprons: For paper making equip ment Table mats and pad coverings Tire liners: Prevents adhesion to rubber Trimmings: For millinery and costumes F.&F.-Fabrics. PX Book Cloth: A special grade of pyroxylinimpregnated, washable book cloth for bookbindings. F.&F.-Fabrics. Tontine Washable Window Shade Cloth: This material is a uniformly woven fabric impregnated and coated on both sides with pyroxylin or vinyl com pounds. Tontine is available in many colors with a range of light transmittancy. Opaque coated cloth and fire resistant grades are also available. F.&F.-Fabrics. Rubber Coated, Silicone Coated and Synthetic Rubber Coated Fabrics Fairprene P.A.W. Tape (Protective and Water- stop): A seam sealant engineered for shipbuilding and aircraft use in oil-, air- and water-tight structural joints. F.&F.-Fabrics. Fairprene Synthetic Rubber Coated Fabrics: A line of synthetic rubber coated fabrics, including silicone rubber and Viton A fluoroelastomer designed for industrial applications in the automotive, aviation, gas, chemical, petroleum and marine fields. Fair prene coated fabrics have extraordinary oil, chem ical, heat, cold, flame, abrasion, flexing and sunlight resistance for diaphragms, gaskets, washers, packings, seam sealants and curing bags and blankets used in laminating. F.&F.-Fabrics. Rug Anchor Rug Underlay: Foam rubber underlay which prevents rugs from slipping. F.&F.-Fabrics Synthetic Rubber Sheet Stocks Fairprene Synthetic Rubber Sheet Stocks: With out fabric insert; made from synthetic rubber com pounds, including silicone rubber and Viton A fluoro elastomer for special industrial applications in the automotive, aviation, gas, chemical, petroleum and marine fields. Has extraordinary oil, chemical, heat, cold, flame, abrasion, flexing and sunlight resistance for gaskets, washers, packings, seam sealants and blankets used in laminating. F.&F.-Fabrics. COATED-COLLOSDAL COATED FABRICS (Cont.) Synthetic Resin Coated Fabrics, Laminates and Felts Armalon TFE-Fluorocarbon Fiber Felt: An indus trial felt made in various thicknesses, either as porous material or impregnated with tetrafluoroethylene resin. The impregnated product is used as a gasketing material on equipment handling corrosive materials. The plain felt is used as a filter material, particularly for corrosive products. The TFE-Fluorocarbon resin provides a maximum degree of temperature and chemical resistance. F.&F.-Fabrics. Armalon TFE-Fluorocarbon Resin Coated Class Fabrics, Tapes and Laminates: For electrical insula tion; for antistick and antifriction conveyor belts and covers for heat sealing units in the food and packag ing industries; for industrial diaphragms and gaskets requiring unusual resistance to chemicals and to high and low temperatures. F.&F.-Fabrics. Furniture upholstery and household furnishings Handbags and pocketbooks Luggage Motion picture screens for the home Pattina olefinic material: Unusual high brilliance effect for shoes and handbags Sporting goods Table pads Wall coverings F.&F.-Fabrics Fabrilite unsupported Vinyl Materials: These materials are made without a fabric backing from selected vinyl compounds for handbags, pocketbooks, looseleaf binders and notebooks. F.&F.-Fabrics Tontine Flame Resistant Vinyl Drapery Material: Coated fabrics for darkening draperies in visual aid schoolrooms, for school stage curtains and cydorama backgrounds. COATINGS: Vinyl Coated Fabrics Fabrilite Vinyl Coated Fabrics: These materials are made on a wide variety of fabric backs and are coated with selected vinyl compounds engineered for maximum resistance to flexing and wear. The fabric backing supports the vinyl coating and makes it re sistant to ripping, tearing, scuffing and cracking. All Fabrilite is water resistant and soap-and-water wash able. Made in a wide variety of colors, embossed effects and finishes, Fabrilite is available in a range of grades based on the service requirements of the end use. Grades are determined by the weight and construction of the fabric base and the amount of vinyl applied. Upholstery grades include: Elastic knit fabric back construction for ease in stretching and tailoring around curves; breathable constructions that promote seating comfort because they permit passage of air through thousands of tiny pores; expanded vinyl constructions combining a soft film with sponge-like center on knit fabric backing. The following list shows how Fabrilite is used by other manufacturers: Automotive: For upholstery and trim, headlining, bindings and welts, and seat covers Baby carriages: For upholstery and tops Belts Bicycle saddles Bookbinding: For looseleaf binders Fabrilite1 in jeweltone metallic colors: Wide range of nontarnishing metallic colors for upholstery and trim, for footwear, for handbags, for wall cover ings Folding door and partition enclosures Footwear: For upper stock in certain types of women's shoes and slippers; for sock lining; for platform wrappers and heel coverings Can: See Finishes, Industrial, Tin Decorating Finish, page 76. Ceramic and Glass: See Ceramic Products, page 26. Chemical Resistant: See Finishes, Trade Sales (Con sumer products). Chemical Resistant Finishes, page 77. Conductive: See Electronic Materials, page 55. Fabric: See Resins (Not Molding), Lucite, page 136; Zytel, page 137; Plastics, Teflon, page 127. Flexible: See Plastics, Alafhon, page 725, Butacite, page 125 and Zytel, page 128; Resins (Not Molding), Elvacet, page 134; Elvanol, page 135; Elvax, page 135 and Zytel, page 137. Paper: See Ludox, page 100; Plastics, Alathon, page 125; Resins (Not Molding), Elvacet, page 134, Elvanol, page 135, Elvax, page 135 and Zytel, page 137. Strippable: See Finishes, Industrial, page 76. Textile: See Cellulose Acetate Flake, page 25; Plas tics, Butacite, page 125; Resins (Not Molding), Elvacet, page 134, Elvanol, page 135, Elvax, page 135 and Zytel, page 137. Wire: See Cellulose Acefafe Flake, page 25; Finishes, Industrial, Synthetic Resin Coated Fabrics and Laminates, Lecton, and Pyre-M.L., page 76; Plastics, Plastacele, page 127, Rulan, page 727, Teflon, page 127 and Zytel, page 128. COLLOIDAL ALUMINA: See Baymal, page 21. COLLOIDAL SILICA: See Ludox, page 100. 43 I! ( DUP210011188 COLOR-COOLING COLOR CONDITIONING: See Finishes, Trade Sales (Consumer Products), page 77. COLOR SEPARATION FILMS: See Photographic Prod ucts, page 116. COLORS: Ceramic: See Ceramic Products, page 26. Coated Fabrics and Paper; See Pigment Colors, page 7 24; Titanium Dioxide Pigments, page 153. Custom Color System: See Finishes, Trade Sales (Consumer Products), page 78. Duco Mixing and Tinting: See Finishes, Reftnisb, page 71. Dulux Mixing and Tinting Enamels: See Finishes, Refinish, page 72. Floor Covering: See Pigment Colors, page 124; Ti tanium Dioxide Pigments, page 153. Gasoline: See Petroleum Chemicals, Dyes, Petroleum, page 113. COLUMBIUM METAL AND ALLOYS: See Metal Prod ucis, page 102. COMBS AND BRUSHES: Combs and brushes of the types listed below, made of Zytel nylon resin, Delrin acetal resin and other plastics, are available in various colors and designs, some of which are design patented. Combs made of nylon are marked Du Pont Nylon. Combs made of Delrin are marked Du Pont Delrin. Some are sold under the trademarks Lido, Arlton, and Lucerne. Beautician combs Women's dressing combs Purse-size combs Purse-size brush-combs Purse-size curl-combs Purse-size comb and brush sets Men's combs Men's pocket combs, with or without clips Barbers' combs Infants' combs and brushes Plastics-Products Div. COMPOSITIONS, CALKING: See Finishes, Trade Sales (Consumer Products), page 77. Glass: See Ceramic Products, page 26. Ink: See Pigment Colors, page 124; Titanium Dioxide Pigments, page 153. Lacquer: See Finishes, Refinish, page 71. Leather: See Pigment Colors, page 124; Titanium Di oxide Pigments, page 153. Lucife, Acrylic: See Finishes, Refinish, page 72. COMPOUNDS, ANTIKNOCK: See Petroleum Chemicals, Antiknock Compounds, page 111. COMPOUNDS--AUTOMOTIVE POLISHING, RUB BING, SHIELDING: See Finishes, Automotive, page 69. COMPOUNDS, AZOIC: See Dyes, NapFithanil, page 54. COMPOUNDS--FLATTENING, MASKING, RUBBING AND POLISHING: See Finishes, Refinish, page 72. Paint: See Pigment Colors, page 124; Titanium Di oxide Pigments, page 153. CONAC RUBBER ACCELERATOR: See Accelerators for Natural and Synthetic Rubber, page 1. Paper: See Dyes, page 53; Pigment Colors, page 124; Titanium Dioxide Pigments, page 153. CONDITIONER, BUTYL RUBBER: See Accelerators for Natural and Synthetic Rubber, Polyac, page 2. Pigments; See Ceramic Products, page 27; Pigment Colors, page 124; Titanium Dioxide Pigments, page 153. Plastic: See Pigment Colors, page 124; Titanium Di oxide Pigments, page 153. Rubber: See Pigment Colors, page 124; Titanium Di oxide Pigments, page 153. Textile: See Dyes, page 53 and 54. Universal Tinting: See Finishes, Trade Sales (Con sumer Products), page 83. CONDUCTIVE COATINGS: See Electronic Materials, page 55. CONNECTING WIRE: See Explosives, Blasting Acces sories and Supplies, page 60. CONTAINERS: See Surplus Materials, page 146. CONTINUOUS PRECISION FORMS: See Plastics, Dymetrol, page 126. CONVERSION FILM: See Photographic Products, page 116. Wallpaper: See Pigment Colors, page 124; Titanium Dioxide Pigments, page 153. COOLING SYSTEM CLEANER AND SEALER: See Auto motive Specialties 7 Products, page 18. COPPER-CYCLONITE COPPER CYANIDE: See Electroplating Products, page 56. COPPER INHIBITOR: See Protective Agents for Natural and Synthetic Rubber, page 131. COPPER MAROON PIGMENTS: See Pigment Colors, page 124. COPPER PLATING PRODUCTS: See Electroplating Produ---r-i-c1 I-n--oOne 56. COPPERIZED CZC CHROMATED ZINC CHLORIDETECHNICAL--CuCI2, ZnCI2 and Na2Cr207: Granular material with slight brownish color. A companion prod uct to CZC Chromated Zinc Chloride for wood preserva tion. Possesses increased and exceptional preservation value and termite repellency, and the treated wood is clean, odorless, paintable and flame retardant. CON TAINERS: Dry--50- and 575-lb. drums. Ind.&Bio.-Ind. COPPRALYTE PLATING SALTS, ADDITION AGENT: See Electroplating Products, page 56. CORE-LOKT BULLETS: See Ammunition, page 13. CORFAM POROMERIC SHOE UPPER MATERIAL: A microporous and permeahle coriaceous sheet material for men's, women's and children's shoe uppers. It is breathable, flexible, water repellent, scuff resistant and up to Vb lighter than comparable fine shoe upper mater ials. Available in rolls in varying sizes and in a wide range of smooth, grained and napped finishes and colors. F.&F.-Pot CORLAR EPOXY CHEMICAL RESISTANT FINISHES: See Finishes, Trade Sales (Consumer Products), Chemical Resistant Finishes, page 77. CORROSION INHIBITORS, PETROLEUM: See Petroleum Chemicals, Corrosion Inhibitors, Petroleum, page 113. COTTON, SOLUBLE: See Nitrocellulose, page 107. CRABGRASS KILLER: See Lawn and Garden Products, page 98. CRANKCASE SEALER: See Finishes, Industrial, Engenamel, page 74. CRESID1NE TECHNICAL: 5-Methyl-o-anisidine (NH2=1); 2-Amino-4-methylanisoIe (CH30=1),- 3-Amino-4- methoxytoluene. Flake form; a Chemical Inter mediate. Orchem D. & C. CRONAFLEX ENGINEERING REPRODUCTION FILM: See Photographic Products, page 116. CRONALITH LIQUID CHEMICALS: See Photographic Products, page 121. CRONAPAQUE PRINT FILM: See Photographic Prod ucts, page 123. CRONAPRESS #100 CLARIFIER: See Photographic Products, page 123. CRONAPRESS CONVERSION FILM: See Photographic Products, page 116. CRONAPRESS PROCESSING CHEMICALS: See Photo graphic Products, page 121. CRONAR POLYESTER PHOTOGRAPHIC FILM: See Photographic Products, page 117. CRONAR POLYESTER PHOTOGRAPHIC FILM BASE: See Photographic Products, page 117. CRONEX X-RAY FILM: See Radiographic Products, page 133. CRYSTAL UREA: See Urea, Crystal, page 160. CUPROUS CYANIDE: See Electroplating Products, Copper Cyanide, page 56. CURING AGENT: See Accelerators for Natural and Synthetic Rubber, MocaTM, page 1; Amine 248, page 7; DPi-7, page 51. CUSTOM COLOR SYSTEM: See Finishes, Trade Sales (Consumer Products), page 78. Copper: See Electroplating Products, Copper Cyanide, page 56. Potassium: See Potassium Cyanide, page 129. Sodium: See Sodium Cyanide, page 142. Zinc: See Electroplating Products, Zinc Cyanide, page 57. CYANOBRIK: See Sodium Cyanide, page 142. CYANOGRAN M: See Sodium Cyanide, page 142. CYANOETHYL METHYL ANILINE: Sold as 3-(N-methyl- anilino)propionitrile Technical, a Chemical Inter mediate. Orchem D. & C. DUP210011190 CYCLOTRlMETHYL-DfAK CYCLOTRIMETHYLENETRINITRAMINE (CYCLONITE, HEXOGEN, RDX): Crystalline or granular high ex plosives, waxed or unwaxed. USE: Shaped charges, "Primacord" and explosive specialty items. CONTAINERS: 100-lb. net fiber drums (waxed material only) and 55-gal. steel drums. Explo.-C.P.S. CZC CHROMATED ZINC CHLORIDE--TECHNICAL-- ZnCI2 AND Na2Cr207: Granular material with slight brownish color or 50% water solution. Solution: Gravity about 51.7" B.; F.P. --37.2 C. USE: for preserving wood against decay, termite attack and for application as a flame retardant. Treated lumber is clean, odorless, paintable, safe to handle and flame retardant. CON TAINERS: Dry--50- and 625-lb. drums. Solution--tank cars. Ind.&Bio.-Ind. D DACOLYTETM ADDITION AGENT: See Electroplating Products, page 56. DACRON POLYESTER FIBER: See Fibers, Synthetic, page 65. DAHL'S ACID: Sold as 4-Amino-l,6(and l,7)-naph- thalenedisulfonic acid Technical, a Chemical Inter mediate. Orchem D. & C. DAIRY CATTLE INSECTICIDE: See Insecticides, page 94. DALAMAR AZO YELLOW: See Pigment Colors, page 124. DDT INSECTICIDES: See Lawn and Garden Products, page 97. DEACTIVATOR, METAL: See Petroleum Chemicals, Metal Deactivators, Petroleum, page 114. DECAHYDRONAPHTHALENE: See Decalin, directly below. DECALIN SOLVENT: Decahydronaphthalene (C10H18). A solvent and a Chemical Intermediate. Orchem D. & C. DECANOL: See Loral 22, page 100. DECYL ALCOHOL: See Loral 22, page 100. DECYL BETAINE: See Product BDO, page 130. DEENALL ROSE INSECTICIDE, FUNGICIDE, MITICIDE: See Lawn and Garden Products, page 96. DEGREASING COMPOUNDS: See Freon Products, page 85; Hydraphtal, page 92; Perchlorethylene, page 1 10; Trichlorethylene, page 158. DEHYDROTHIO-p-TOLUIDINE TECHNICAL: 2-(pAminopheny!)-6-methylbenzothiazole. Coa rse powder form; a Chemical Intermediate. Orchem D. & C. DEH YDROTH lO-p-TOLUlDINESULFONIC ACID TECHNICAL: 2-(p-Aminophenyl)-6-methyl-7-benzo- thiazolesulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. DEKATYL DYES: See Dyes, page 54. DELAY UNITS: See Explosives, Blasting Accessories and Supplies, E/cord, page 60. DELRIN ACETAL RESIN: See Plastics, page 125. DELSAN A-D SEED PROTECTANT: See Seed Treat ments, page 139. DENTABESTTM TOOTHBRUSHES: See Toothbrushes, page 158. DENTA-FLEX TOOTHBRUSHES: See Toothbrushes, page 158. DENTAL MATERIALS: See Plastics, Lucite Dental Materials, page 126. DENTAL X-RAY FILM: See Radiographic Products, page 132. DEODORANTS: See Formaldehyde Solution, page 85; Zinc Peroxide, page 165. DETAFLEXTM: Flexible high explosives in cone form. Available in a variety of cross sections and configur ations with or without a nylon overbraid. USE: As a detonating transmission line. CONTAINERS: Fiber boxes. Explo.-C.P.S. DETASHEET FLEXIBLE EXPLOSIVE EL-506: Flexible high explosive compositions available in convenient sheet, tube, rod and cord forms. USE: Typical applica tions include metal hardening, metal cutting and form ing. CONTAINERS: Fiber boxes. Explo.-C.P.S. DETERGENTS: See Duponol, page 52; Alkanol, page 6; Sodium Metasi/icate, page 142. DETONATORS: See Explosives, Blasting Accessories and Supplies, page 59. DEVELOPING AGENTS, DYE: See Dyes, page 53. DEVELOPING AGENTS, PHOTOGRAPHIC: See Photo graphic Products, page 121. DFL NO. 3: See Polymerization Chemicals for Synthetic Rubber, page 129. DIAK NOS. 1, 2, 3 AND 4: See Accelerators for Natural and Synthetic Rubber, page 7. 46 DUP210011191 DSAMSNO-DiBUTYL 1.5-DIAMINOANTHRAQUINONE TECHNICAL: Crystolline solid form; a Chemical Intermediate. Orchem D. & C. 2.6-DIAMINOANTH RAQUINONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 4.8- DIAMlNOANTH RARUFIN TECHNICAL: 4,8Diamino-1 ,5-dihydroxyanthraquinone. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. 2.4- DIAMINOBENZENESULFONIC ACID: Sold as 1,3- Phenylenediamine-4-sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. 4.4- DIAMINO-l ,1 -DIANTHRIMIDE: Sold as 1,1'- lminobis(4-aminoanthraquinone) Technical, a Chem ical Intermediate. Orchem D. & C. 1.4- DiAMINO-2,3-DICHLOROANTH RAQUINONE TECHNICAL: Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 1.4-DIAMINO-2,3-DIH YDRO AN TH RAQUINONE TECHNICAL: Leuco-1,4-diaminoanthraquinone; Ace tate Leuco Violet. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. 4.8- DIAMINO-1,5-DlHYDROXYANTHRAQUINONE Sold as 4,8-Diaminoanthrarufin Technical, a Chem ical Intermediate. Orchem D. & C. 3.6- DIAMINO-2,7-DIMETHYLACRIDlNE TECHNICAL: Acridine Yellow Base. Paste form; a Chemical Intermediate. Orchem D. & C. 3.6- DIAMINO-2,7-DIMETHYLACRIDINE SULFATE TECHNICAL: Acridine Yellow Sulfate. Paste form; a Chemical Intermediate. Orchem D. & C. 4,4'DlAMIN ODIPHENYLAMINE-2-SULFONIC ACID: Sold as 5-Amino-2-(p-aminoanilino)benzenesulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. o-DIANISIDINE DRY TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. o-D!AN!S!DINE PASTE TECHNICAL: 3,3'-Dimethoxybenzidine. Paste form; a Chemical Intermediate. Orchem D. & C. 1,1-DIANTHRIMIDE: Sold as l,l'-lminodianthraquinone Technical, a Chemical Intermediate. Orchem D. & C. DiAZO DYES: See Dyes, page 54. DIAZO PIGMENTS: See Pigment Colors, Naphthanil, page 124. 1,5-DIBENZAMIDOANTHRAQUINONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 4,5 -DIBENZAMIDO-1 ,1 -IMINODIANTHRA QUINONE TECHNICAL: Anthrimide for Brown AR. Powder form; a Chemical Intermediate. Orchem D. & C. DIBENZANTHRONE: Sold as Violanthrone Technical, a Chemical Intermediate. Orchem D. & C. 2,2'-DIBENZANTHRONYL: Sold as (4,4'-Bi-7H-benz (de)anthracene)-7,7'-dione Technical, a Chemical Intermediate. Orchem D. & C. 13,13'-DIBENZANTHRONYL: Sold as (3,3'Bi-7H-benz (de)anthracene)-7,7'dione Technical, a Chemical Intermediate. Orchem D. &C. DIBENZANTHRONYL SULFIDE: Sold as 3,3'Thiodi-7H- benz(de)anthracen-7-one Technical, a Chemical Intermediate. Orchem D. &C. N,N-DIBENZYLANILINE TECHNICAL: N-Phenyldi- benzylamine. Crystalline solid form; a Chemical Intermediate. Orchem D. &C. 3,9-DIBROMO-7H-BENZ( DE) ANTHRAC E N -7 - ON E TECHNICAL: Dib romobenzanthrone. Powder form; a Chemical Intermediate. Orchem D. &C. 4,4'-DIAMIN 0-2,2'-STILBENEDISULFQNIC ACID TECHNICAL: Powder form; a Chemical Inter mediate. Orchem D. & C. DIAMOND KNIVES: Ultra-sharp, single diamond cutting tools with cutting edge included angles of 35 to 80 and lengths of 1.5 to 7.0 millimeters. USE: Thin section ing by ultra-microtomy techniques for subsequent elec tron microscopy, high-precision machining and metal finishing, metallographic specimen preparation, filmslitting, ruling. Available premounted in boats to fit ultra-microtomes or in shanks to customer specifications. Development-I.P.D. D1BROMOBENZANTHRONE: Sold as 3,9-Dibromo-7H- benz(de)anthracen-7-one Technical, a Chemical Intermediate. Orchem D. &C. DIBROMO-8,1 6-PYRANTHRENEDIONE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. DUP210011192 DIBUTYL-DIETHYL N,N'-Dl ( SEC.-BUTYL)-P-PHENYLENEDlAMINE: See Petroleum Chemicals, Antioxidants, Petroleum, Gasoline Antioxidant No. 22, page 112. 2,5-DICHLORONITROBENZENE: Sold as 1,4-Dichloro2-nitrobenzene Technical, a Chemical Intermediate. Orchem D. & C. 2,5-DICHLOROANILINE FLAKED TECHNICAL: Flake form; a Chemical Intermediate. Orchem D. & C. 3.4- DICHLOROANILINE S2 TECHNICAL: Cast solid form; a Chemical Intermediate. Orchem D. & C. 2.5- D!CHLOROAN!LINE-4-SULFONIC ACID TECH NICAL: 2,5-Dichlorosulfanilic acid. Paste form; a Chemical Intermediate. Orchem D. & C. 1.5- DICHLOROANTHRAQUINONE TECHNICAL: Crys talline solid form; a Chemical Intermediate. Orchem D. & C. 1,5{ and 1,8)-DICHLOROANTHRAQUINONE TECH NICAL: Crystalline solid form; a Chemical Inter mediate. Orchem D. & C. 2,6-DICHLOROBENZAL CHLORIDE TECHNICAL: alpha, alpha, 2,6-Tetrachlorotoluene. Liquid form; a Chemical Intermediate. Orchem D. & C. N,N'-(2,5-DICHLORO-3,6-DIOXO-p-PHENYLEN E) BIS(6-(2(3H)-OXO-5-BENZIMIDAZOLYLAMINO)METANILIC ACID) TECHNICAL: Dioxazine blue base. Lump form; a Chemical Intermediate. Orchem D. & C. 2.5- DICHLORO-4-(3-METHYL-5-OXO-2-PYR AZO- LIN-1-YL) BENZENESULFONIC ACID TECHNICAL: (Dichlorosulfophenyl)methylpyrazolone. Paste form; a Chemical Intermediate. Orchem D. & C. DICHLORODIFLUOROMETHANE: See Freon Products, Freon-12, page 85. DICHLOROFLUOROMETHANE: See Freon Products, Freon-21, page 86. DICHLOROMETHANE: See Methylene Chloride, page 104. 2.6- D 1CHLORO-4-NITROANILINE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 3,4-DICHLORONITKOBENZENE TECHNICAL: 1,2- Dichloro-4-nitrobenzene. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. 3-(3,4-DICHLOROPHENYL)-l,l DIMETHYLUREA (DIURON): See Weed and Brush Killers, Karmex, page 162. 2,5-DICHLOROSULFANILIC ACID: Sold as 2,5-Dichloro- aniline-4-sulfonic acid Technical, a Chemical Inter mediate. Orchem D. & C. (DICHLOROSULFO PHENYL) METH YLPYRAZOLO N E: Sold as 2,5-Dichloro-4-(3-methyl-5-oxo-2-pyrazolin- 1-yl) benzenesulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. 2,6-DICHLOROTOLUENE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. DICHLOROTETRAFLUOROETHANE. See Freon Prod ucts, Freon-114, page 87. N,N-DICINNAMYLIDENE-1,6-HEXANEDIAMINE: See Accelerators for Natural and Synthetic Rubber, Diak No. 3, page 1. DIELDRIN: See Seed Treatments, Delsan, page 139. DIELECTRIC GAS: See Freon Products, Freon-C-318, Freon-115, Freon-176, page 87. DIETHYLAMINE--TECHNICAL--{CH3CH2)2NH Color less liquid; B. P. 55.4C.; Sp. Gr. 0.706; miscible with water and most organic solvents. USE: In the synthesis of rubber chemicals, pharmaceuticals, corrosion inhib itors and textile softeners, wetting agents and emulsifiers. CONTAINERS: 5- and 55-gal. drums, tank cars. Ind.&Bio.-Ind. DIETHYLAMINE--TECHNICAL--(CH3CH2)2NH: For use in manufacture and formulation of pesticides. CON TAINERS: 5- and 55-gal. drums, tank cars. Ind.&Bio.-Bio. DIETHYLAMINOETHANOL (C2H5)NCH2CH2OH: Colorless hygroscopic liquid combining the properties of amines and alcohols; B.P. 161C.; Sp. Gr. 0.88--0.89; miscible with water and most organic solvents. USE: In the synthesis and preparation of pharmaceutical anti-rust compositions, emulsifying agents, textile softeners, de tergents and derivatives containing tertiary amine groups. CONTAINERS: 55-gal. drums, tank cars and tank, trucks. Ind.&Bio.-Ind: 1,2-DICHLORO-4-NITROBENZENE: Sold as 3,4-Di- chloronitrobenzene Technical, a Chemical Inter mediate. Orchem D. & C. DIETHANOLANILINE: Sold as 2,2'-Phenyliminodiethanol Technical, a Chemical Intermediate. Orchem D. & C. 1,4-DICHLORO-2-NITROBENZENE TECHNICAL: 2,5- Dichloronitrobenzene. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. 2-DIETHYLAMINOETHYL METHACRYLATE MS TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. DUP210011193 DIETHYL-DIMETHYL m-DIETHYLAMINOPHENOL: Sold as N,N-Diethyl-m. aminophenol Technical, a Chemical Intermediate. Orchem D.`& C. N,N-DIETHYL-m-AMINOPHENOL TECHNICAL: m-Di- eihylaminophenol. Crystalline solid form; a Chem ical Intermediate. Orchem D. & C. N,N-DIETHYLAN!LINE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. njCTUYi_^MiMWE_rr._cijLCQiKiir ACID: Sold as N N Diethylmetanilic acid, sodium salt Technical, a Chem ical Intermediate. Orchem D. & C. N,N-DIETHYLCYCLOHEXYLAMINE TECHNICAL: Liq uid form; a Chemical Intermediate. Orchem D. & C. N,N-DIETHYLMETANILIC ACID, SODIUM SALT TECH NICAL: Diethylaniline-m-sulfonic acid. Granular solid form; a Chemical Intermediate. Orchem D. & C. N,N-DIETHYL-a-NAPHTHYLAMINE TECHNICAL: Liq uid form; a Chemical Intermediate. Orchem D. & C. N,N-DIETHYL-m-TOLUIDINE TECHNICAL: Liquid form, a Chemical Intermediate. Orchem D. & C. DIFFERENTIAL THERMAL ANALYZER: See Instruments, page 95. DIFFRACTION FILTERS: See Radiographic Products, page 132. 1,1 -DIFULUOROETHANE: See Freon--Other Products, page 88. DIGLYCOLIC ACID: See Acids, Diglycolic Acid, page 3. 2.3- DIHYDRO-1,4-BIS( METH YLAMIN 0) A N T H R A- QUINONE TECHNICAL: Leuco-1,4-dimethyldi- aminoanthraquinone. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 1.4- DIHYDROXYANTHRAQUINONE: Sold as Quinizarin Technical, a Chemical Intermediate. Orchem D. & C. 1.5- DIHYDROXYANTHRAQUINONE: Sold as Anthrarufin Technical, a Chemical Intermediate. Orchem D. & C. 1,8-DIHYDROXYANTHRAQUINONE: Sold as Chrysazin Technical, a Chemical Intermediate. Orchem D. & C. 2.6- DIHYDROXYANTHRAQUINONE: Sold as Anthraflavic Acid Technical, a Chemical Intermediate. Orchem D. & C. DIHYDROXYDIBENZANTHRONE: Sold as Dihydroxyviolanthrone Technical, a Chemical Intermediate. Orchem D. & C. 2,4-DIHYDROXYQUINOLINE: Sold as 2,4-Quinolinediol Technical, a Chemical Intermediate. Orchem D. & C. Dl HYDROXY VIOLAN THRONE TECHNICAL: Dihy- droxydibenzanthrone. Solid form; a Chemical Inter mediate. Orchem D. & C. N,N'-DI-ISOPROPYL-PARA-PHE NY LENE DIAMINE SOLUTION: See Petroleum Chemicals, Antioxidants, Gasoline Antioxidants No. 22 and No. 23, page 112. 1,3-DIMETHOXYBENZENE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. 3,3'-DIMETHOXYBENZlDINE: Sold as o-Dianisidine Dry and Paste Technical, a Chemical Intermediate. Orchem D. & C. DIMETHYL FORMAMIDE: See DMF, page 51. DIMETHYL SULFATE (METHYL SULFATE) -- (CH3)2S04: Water-white liquid; F. P. --31.8C.; B. P. 188.8C. ; Sp. Gr. (15.6/15.6C.) 1.332. Us e: As a methylating agent in making intermediates, dyes and synthetic drugs. CONTAINERS: 15- and 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. DIMETHYL TEREPHTHALATE (DMT) -- H3COOCC6H4COOCH3: A high-melting, exceptionally high purity ester of terephthalic acid. USE: In the manu facture of polyethylene terephthalate and as an inter mediate for the synthesis of organic derivatives of tere phthalic acid. CONTAINERS: 50-1 b. polyethylene-lined paper bags, 10-, 50- and 350-lb. polyethylene-lined fiber drums. Explo.-C.P.S. DIMETHYLACETAMIDE: See DMAC, page 51. DIMETHYLAMINE--ANHYDROUS TECHNICAL-- (CH3)2NH: For use by manufacturers in formulating weed killers and other pesticides. CONTAINERS: 100-lb. cylinders, tank cars and tank trucks. Ind.&Bio.-Bio. DIMETHYLAMINE (DMA)--ANHYDROUS AND AQUEOUS SOLUTIONS--TECHNICAL--(CH3)2NH: Anhydrous, colorless gas, clear and water-white when liquefied. USE: Intermediate in the manufacture of rub ber accelerators and quaternary compounds; in manu facture of pharmaceutical intermediates, fungicides and herbicides; as a dehairing agent in leather processing; in manufacture of solvents and rocket fuels. CONTAINERS: Anhydrous--100-lb. cylinders, 600-lb. cylinders, tank cars and tank trucks. Aqueous solution--55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. DUP210011194 DIMETHYL-DiORTHO 40% DIMETHYLAMINE SOLUTION--(CH3)2NH: USE: For use by manufacturers in formulating 2,4-D and 2,4,5-T weed killers and other pesticides. CONTAINERS: 55-gal. drums (nonreturnable), tank cars and tank trucks. Ind.&Bio.-Bio. 60% DIMETHYLAMINE SOLUTION --(CH3)2NH: USE: For use by manufacturers in formulating 2,4-D and 2.4- 5-T weed killers and other pesticides. CONTAINERS: 55-gal. drums (nonreturnable), tank cars and tank trucks. ind.3tBio.-Bio. N,N-DIMETHYLANILINE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. 2,4(and 2,6)-DINITROCHLOROBENZENE TECH NICAL: Fused solid form; a Chemical Intermediate. Orchem D. & C. DINITROCHRYSAZ1N TECHNICAL: D initro-1,8-di- hydroxyanthraquinone. Coarse solid form; a Chemical Intermediate. Orchem D. & C. 4,5-DlNITRO-2,7-CHRYSAZINDISULFQNlC ACID, DI SODIUM SALT TECHNICAL: Paste form; a Chem ical Intermediate. Orchem D. & C. 4,4 -DlNITRO-1,1 -DIANTHRIMIDE: Sold as 1,1'- lminobis(4-nitroanthraquinone) Technical, a Chem ical Intermediate. Orchem D. & C. 2.4- DIMETHYLANILINE: Sold as 2,4-Xylidine P Tech nical, a Chemical Intermediate. Orchem D. & C. 2.5- DIMETHYLANILINE: Sold as 2,5-Xylidine Technical, a Chemical Intermediate. Orchem D. & C. 3,3 '-DIMETHYLBENZIDINE: Sold as o-Tolidine Dry and Paste Technical, a Chemical Intermediate. Orchem D. & C. 3,3'-DIMETHYLBENZIDINE DIHYDROCHLORIDE: Sold as o-Tolidine Hydrochloride Technical, a Chemical Intermediate. Orchem D. & C. 2,2'-DIMETHYL-1,1 '-BIANTHRAQUINONE TECH NICAL: Powd er form; a Chemical Intermediate. Orchem D. & C. N,N'-DIMETHYL-N,N'DINlTROSOTEREPHTHALAMIDE: See Nifrosan, page 108. DINITRODIBENZANTHRONYL: Sold as Dinitro-3,3'- bi-7H-benz(de)anthracene)-7,7'-dione Technical, a Chemical Intermediate. Orchem D. & C. DINITRO-l,8-DIHYDROXYANTHRAQUINONE: Sold as Dinitrochrysazin Technical, a Chemical Inter mediate. Orchem D. & C. 2.4- DINITRO-4'-HYDROXYDIPHENYLAMINE TECH NICAL: p-(2,4-Dinitroanilino)phenol; Para Base. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. 2.4- DINITROPHENOL TECHNICAL: Crystalline paste form; a Chemical Intermediate. Orchem D. & C. 4,8-DINITROPHENYLETHER ANTHRAQUINONE: Sold as 1,5-Bis(2,4-dinitrophenoxy)-4,8-dinitroanthraqui- none Technical, a Chemical Intermediate. Orchem D. & C. DIMETHYLDITHIOCARBAMATE, FERRIC: See Fungi cides, Fermate, page 89. DINITROSOBENZENE, POLY-PARA: See Accelerators for Natural and Synthetic Rubber, Po/yac, page 2. 2,2'-DIM ETHYLTHIOC ARB ANILIDE: Sold as Di-otolylthiourea Technical, a Chemical Intermediate. Orchem D. & C. DINA ACID: Sold as (1,1 '-Binaphthalene)-8,8'-dicarboxylic acid Technical, a Chemical Intermediate. Orchem D. & C. p-( 2,4-DINITROANIL1NO) PHENOL: Sold as 2,4-Dinitro- 4'-hydroxydiphenylamine Technical, a Chemical Intermediate. Orchem D. & C. m-DINITROBENZENE 89 TECHNICAL: Wet crystalline solid form; a Chemical Intermediate. Orchem D. & C. 3.5- DINlTROBENZOIC ACID TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. St C. DINITROSOPENTAMETHYLENE TETRAMINE: See UnicelTM, Blowing Agents, page 160. 4,4'-DINITRO-2,2'-STILBENEDISULFONIC ACID, DI SODIUM SALT TECHNICAL: Crystalline paste form; a Chemical Intermediate. Orchem D. & C. 2.4- DINITROTOLUENE TECHNICAL: Crystalline solid form; a Chemical Intermediate. Orchem D. & C. DINITROTOLUENE MIXTURE TECHNICAL: Cast solid form; a Chemical Intermediate. Orchem D. & C. DIOXAZINE BLUE BASE: Sold as N,N'-(2,5-Dichloro-3, 6-dioxo-p-phenylene)bis(6-(2(3H)-oxo-5-benzi- midazolylamino) metanilic acid) Technical, a Chem ical Intermediate. Orchem D. & C. DI-o-TOLYLGUANIDINE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. 2,4-DINITROCHLOROBENZENE TECHNICAL: 1- Chloro-2,4-dinitrobenzene. Fused solid form; a Chemical Intermediate. Orchem D. & C. DI-o-TOLYLTHIOUREA TECHNICAL: 2,2'-Dimethylthiocarbanilide. Powder form; a Chemical Intermediate. Orchem D. & C. 50 DUP210011195 DiORTHO-DRAPERY' DI-ORTHO-TOLYLGUANIDINE: See Accelerators for Natural and Synthetic Rubber, DOTG, page 7. DI-ORTHO-TOLYLGUANIDINE SALT OF DICATECHOLBORATE: See Accelerators for Natural and Synthetic Rubber, Permalux, page 1. DI-PARA-METHOXYDIPHENYLAMINE: See Antioxi dants for Natural and Synthetic Rubber, Thermoflex A, page 16. DIPENTAMETHYLENE THIURAM TETRASULFIDE: See Accelerators for Natural and Synthetic Rubber, Tetrone, page 2. DIPHENYLAMINE ( DPA) --REFINED--(C6H5),NH: Available in a molten state and as a flaked solid. USE: In manufacture of rubber antioxidants, as an additive for lubricating oils and greases, as a polyethylene stabilizer against oxidative degradation, phenothiazine, fungicides and insecticides, smokeless powder stabiliza tion, a chemical intermediate in dyes, as an antioxidant and stabilizer for fats, oils, soap, paint, printing ink, glue and pharmaceuticals. CONTAINERS: 50-and 100-lb. paper bags, 300-lb. fiber drums, 70,000- and 90,000-!b. tank cars. Explo.-C.P.S. DIPHENYLAMINE REFINED FLAKE INDUSTRIAL: See Nutrition and Therapy Products, page 708. DIPHENYL-PARA-PHENYLENEDIAMINE: See Anti oxidants for Natural and Synthetic Rubber, Akroflex C, Akroflex CD and Thermoflex A, page 15. DISALICYLALPROPYLENEDIAMINE: See Protective Agents for Natural and Synthetic Rubber, Copper In hibitor 50, page 131. N,N'-DISALICYLIDENE-1,2-PROPANEDIAMINE: See Petroleum Chemicals, Metal Deactivators, Petroleum, page 114. 2,6-DI-TERTIARY BUTYL-4-METHYLPHENOL: See Petroleum Chemicals, Antioxidants, Petroleum, Gasoline Antioxidant No. 29, page 112. DISINFECTANTS: See Seed Treatments,page 138; VPM Soil Fumigant, page 161. DISODIUM ETHYLENEBISDITHIOCARBAMATE (NABAm): See Fungicides, Parzaie Liquid Nabam Fungicide, page 89. DISPERSING AGENTS: See Alkanol, page 6; Duponol, page 52. DISSOLVO TAR AND ROAD OIL REMOVER: See Automotive Specialties 7 Products, page 19. DITCHING DYNAMITE: See Explosives, Dynamites, page 62. DIURON: See Weed and Brush Killers, Karmex, page 162. DIXYLYL DISULFIDES, MIXED: See Chemical Peptizers for Natural and Synthetic Rubber, RR-10, page 39. DMA: See N,N'-Dimethylaniiine Technical, page 50; Dimethylamine, page 49. DMA-4 (MULTIFUNCTIONAL ADDITIVE): See Petro leum Chemicals, Multifunctional Additives, Petroleum, page 7 74. DMAC-DIMETH YLACET AMIDE --TECHNICAL -- CH3CON(CH3)2:Colorless liquid; B. P. 165.5C.; F. P. -- 20C.; Sp. Gr. 0.945; miscible with water and common organic solvents. USE: As a solvent for polyacrylonitrile, vinyl resins, cellulose derivatives, styrenes, linear poly esters and paint removers. As a catalyst and solvent in elimination, halogenation, cyciization, alkylation, inter esterification, phthaloylation reactions and others. CON TAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. DMA-F (MULTIFUNCTIONAL ADDITIVE): See Petro leum Chemicals, Fuel Oil Additives, DMA-F, page 7 73. DMF-DIMETHYL FORMAMIDE--TECHNICAL-- HCON(CH3)2: Colorless liquid; B. P. 153C. ; F. P. -- 61 C.; Sp. Gr. 0.953; miscible with water and com mon organic solvents. USE: As a solvent for vinyl resins in lacquers, films and printing inks, for polyurethanes, pigments, dyes and inorganic salts. As a catalyst and solvent in many types of organic reactions such as halo genation, alkylation, elimination, cyciization and many others. As a reaction medium in dyqs; as a selective refining solvent for acetylene, acid gases and petroleum constituents. CONTAINERS: 5- and 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. DMT: See Dimethyl Terephthalate, page 49. DODECANOL: See Loro/ 5 and Loral 7, page 99. DODECYL ALCOHOL: See Lorol 5 and Lord 7, page 99. DORMANT SPRAY OIL: See Lawn and Garden Prod ucts, page 97. DOSIMETER FILM: See Radiographic Products, page 133. DOTG RUBBER ACCELERATOR: See Accelerators for Natural and Synthetic Rubber, page I. DPA: See Diphenylamine, page 51. DPI-7 EUTECTIC CURING AGENT: Liquid form; a Chemical Intermediate. Orchem D. & C. DRAFTING FILM: See Photographic Products, page 116. DRAPERY MATERIAL: See Coated Fabrics, Tontine, page 43. 51 i DUP210011196 DRESSINGS-DUPONOL DRESSINGS, RUBBER: See Automotive Specialties 7 Products, page 20. DRESSING, TREE WOUND: See Lawn and Garden Products, page 97. DRIERS FOR FINISHES: See Finishes, Industrial, Driers, page 74. DRYCLEANING FLUIDS: See Perchloroethylene, page 110; Trichloroethylene, page 159. DUCLEAN NO. ? INHIBITED SULFURIC ACID: See Acids, Duclean No. 1, page 3. DUCLEAN NO. 2 HYDROCHLORIC ACID SOLUTION INHIBITED: See Acids, Duclean No. 2, page 3. DUCO FINISHES: See Finishes, Automotive, page 69; Finishes, Refinish, page 71; Finishes, Industrial, page 74; Finishes, Trade Sales (Consumer Products), page 78. DU-LITE WOOD BLEACH: See Finishes, Industrial, page 74. DULUX FINISHES: See Finishes, Automotive, page 69; Finishes, Refinish, page 71; Finishes, Industrial, page 74; Finishes, Trade Sales (Consumer Products), page 76. DUOBEL PERMISSIBLE EXPLOSIVES: See Explosives, Permissible Explosives, page 63. DUOL PIGMENTS: See Pigment Colors, page 124. DUPONOL SURFACE ACTIVE AGENTS: Duponol 80 Surface Active Agent: Sodium salt of technical octyl alcohol sulfate. A wetting and pene trating agent particularly effective in the presence of high concentrations of electrolytes. Orchem D. & C. Duponol AM Surface Active Agent: Ammonium salt of technical lauryl alcohol sulfate. Detergent, emulsifying, and foaming agent suited for cosmetics, particularly shampoos. Orchem D. & C. Duponol C Sodium Lauryl Sulfate U.S.P.: Meets requirements of U.S.P. XIV for sodium lauryl sulfate. Used as an emulsifying, foaming and dispersing agent for cosmetic, dental and medical preparations. Orchem D. & C. Duponol D Paste Surface Active Agent: Sodium salt of a long chain alcohol sulfate. A powerful scour ing, emulsifying, dispersing, wetting agent and de tergent, used primarily in the textile industry. Orchem D. & C. Duponol EL Surface Active Agent: Triethanolamine salt of technical lauryl alcohol sulfate. A detergent. wetting, dispersing and emulsifying agent having ex cellent solubility, color stability and foaming proper ties, particularly suitable for shampoos. Orchem D. & C. Duponol EP Surface Active Agent: Diethanolamine salt of technical lauryl alcohol sulfate. A detergent, wetting, dispersing and emulsifying agent having ex cellent solubility, color stability and foaming proper ties, particularly suitable for shampoos. Orchem D. & C. Duponol G Surface Active Agent: Amine salt of saturated long chain alcohol sulfate. A powerful emulsifying agent for oils and solvents. An effective antistatic agent for use in nonpolar solvents. Orchem D. &. C. Duponol L-144-WDG Surface Active Agent: So dium salt of a modified unsaturated alcohol sulfate. An emulsifying agent for agricultural products and other similar type applications. Orchem D. & C. Duponol LS Paste Surface Active Agent: Sodium salt of an unsaturated alcohol sulfate. A scouring and emulsifying agent in the leather and textile industries. Orchem D. & C. Duponol ME Dry Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate containing mini mum electrolyte. A general, all-purpose, emulsifying, dispersing agent and detergent used in a wide variety of fields, such as metal processing, electroplating, textile and leather. Orchem D. & C. Duponol OS Surface Active Agent: Combination of an amine salt of saturated alcohol sulfate and a free long chain unsaturated alcohol. An effective emulsify ing agent for preparing oil-in-water emulsions. Orchem D. & C. Duponol QC Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate; fluid liquid. A unique form of sodium lauryl sulfate which can be used as a base for all three major types of shampoos--clear liquid, cream lotion and paste. Orchem D. & C. Duponol RA Surface Active Agent: Sodium salt of modified alcohol sulfate. An excellent liquid type scouring, emulsifying and dispersing agent. Orchem D. & C. Duponol SN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. A detergent, wetting, dispersing and emulsifying agent with ex ceptionally high foaming power, designed for use in shampoos and hand-cleaners. Orchem D. & C. Duponol ST Surface Active Agent: Alkylolamine salt of saturated long chain alcohol sulfote. A basic ingredient of liquid shampoos. Orchem D. & C. 52 DUP210011197 DUPOIMOL-DYES DUPONOL (Cent.) Duponol WA Dry Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate similar in prop erties to Duponol ME Dry but of higher electrolyte content. General industrial applications. Orehem D. & C. Duponol WA Paste Surface Active Agent: Sodium salt cf technics! !cury! cicchc! sulfate. A detergent wetting, foaming, dispersing and emulsifying agent for use in cosmetics, metal processing, leather, build ing materials, paper, pigments and cleaning. Orehem D. & C. Duponol WAQ Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. A lower viscosity form of Duponol WA Paste with essentially the same properties and uses. Orehem D. & C. Duponoi WAQE Surface Active Agent: Sodium salt of technical lauryl alcohol sulfate. A product with extremely low unsulfated alcohol and electrolyte content designed primarily for use in emulsion poly merization reactions. Orehem D. & C. Duponol WAT Surface Active Agent: Triethanol amine salt of higher alcohol sulfate. A detergent, wetting, dispersing and emulsifying agent of high solubility and good foaming, particularly suitable for shampoos. Orehem D. & C. Duponol WN Surface Active Agent: Sodium salt of saturated long chain alcohol sulfate. A wetting and penetrating agent in acid solutions. Orehem D. & C. Duponol WS Surface Active Agent: Combination of an amine salt of saturated alcohol sulfate plus a free long chain saturated alcohol. A wax-soluble emulsifying agent for preparing water-in-oil emulsions. Orehem D. & C. Duponol XL Surface Active Agent: Modified long chain alcohol sulfate. Used as a shampoo base for high quality clear liquid and gel shampoos. Orehem D. & C. DU PONT POWER SPRAY SYSTEM: See Professional Floor Ma/nfenance Products, page 131. DU PONT PRE-SPOTTER: A milk-white, water-based emulsion for prespotting fabrics prior to cleaning in Valclene dryclearing fluid systems. CONTAINERS: 1-gal. (8.4-lb.) plastic bottles. Electrochem. DUROBRITE ADDITION AGENTS: See Electroplating Products, page 56. DYBAR FENURON WEED AND BRUSH KILLER: See Weed and Brush Killers, Dybar,JS, page 162. DYCR/L PHOTOPOLYMER PRINTING PLATES: See Photographic Products, Printing Plates, page 123. DYE INTERMEDIATES: See Chemical Intermediates, pages 29 to 38. DYEING ASSISTANTS: See Alkanol, page 6; Av/fex, page 21 ; Avitone, page 27; Duponot, page 52; katy/ Carrier A, page 96; Merpol, page 101; Product BCO, page 130; Retarder LAN, page 137. DYES: Dyes are marketed in dry or wet form, depending on certain peculiarities or ultimate uses of the individual products. The dry dyes are generally finely divided powders, although there are colors marketed as small crystals, flakes or grains. The items sold in wet form vary in consistency from solutions to thick pastes. Our dyes are sold under specific trademarks, various groups or classes of colors being given a distinctive trademark, as follows: Acetamine Developer--AD Extra: A product used as a developing agent in the application of the diazo type dyes, principally blacks, to acetate fiber. Orehem D. & C. Acetamine Dyes: A group of azo disperse dyes specifically developed for application to acetate and especially suited to the coloration of nylon. Orehem D. & C. Beta Naphthol: A developing agent used in the dye ing of diazo or developed colors. Orehem D. & C. Capracyl Dyes: A group of neutral-dyeing pre- metalized acid colors that produce the highest poss ible degree of light fastness on nylon. Also suitable for dyeing wool, particularly in blends with cellulosic fibers. Orehem D. & C. Cavalite Dyes: A line of fiber-reactive dyes for cellulose. Feature bright shades with good fastness properties. Orehem D. & C. Celanthrene Dyes: A group of anthraquinone dis perse dyes designed especially for dyeing acetate and also suitable for application to nylon. Orehem D. & C. ChlorostainTM N,N Base, WR: Chlorine indicators for safety papers. Orehem D. & C. Chromacyl Dyes: A group of dyes that contain chromium in the dye molecule. Suitable for wool and nylon, these dyes are characterized by ease of ap plication and good fastness. Orehem D. & C. 53 IP ! DUP210011198 DYES DYES (Cont.) Dekotyl Dyes: A line of dyes for dyeing and printing 65% Dacron polyester fiber and 35% cotton. Orchem D. & C. Haioponf Pigment Colors: A line of pigment colors. Used for tinting white paper. Orchem D. & C. Latyl Dyes: A group of disperse dyes developed particularly for coloration of Dacron polyester fiber, on which they have exceptionally good light- and wet fastness properties. Orchem D. & C. Leucosol Dyes: A line of vat colors which have been specially prepared for textile printing. Characterized by excellent application and fastness properties. Orchem D. & C. Lithosol Pigments, Dyes and Lifhosol Acids and Bases: A line of pigments used extensively on paper. Also speciality dyes. Acids and bases are chemicals specially prepared for the manufacture of lakes and organic pigments. Orchem D. & C. Luxol Dyes: A line of spirit- and lacquer-soluble dyes. Used in lacquers, wood stains, stamp inks, ball point pen inks, etc. Orchem D. &. C. Monastral Pigments: A type of insoluble pigments, producing extremely bright shades of blue and green with excellent fastness properties and high tinctorial strength. Used in the lake, wallpaper, paper, textile and other industries. Orchem D. & C. Naphthanil Azoic Compounds: A line of azoic compounds used on cotton and rayon as a prepare prior to combining with the various Naphthanil dye bases and diazo colors to form insoluble dyes. Also combined directly with the diazotized bases to pro duce organic pigments for the lake and finishes industry. Orchem D. & C. Naphthanil Dye Bases: Products used in combina tion with the various Naphthanil prepares to form insoluble azo dyes. Prior to coupling the bases must first be diazotized to form the diazo salt. Widely used on cotton and rayon textiles. Orchem D. & C. Oil Colors: Oil-soluble dyes used for a variety of purposes in which the prime requirement is good solu bility in oils, waxes and similar materials. Orchem D. & C. Paper Whites: Fluorescent white dyes especially de signed for improving the whiteness or brilliance of white papers. Orchem D. & C. Ponolith Pigments: A type of highly dispersed pig ments. Used primarily for the coloring and tinting of paper. Orchem D. & C. Ponsol Dyes: A line of anthraquinone vat dyes. Used for the dyeing and printing of cotton and rayon and characterized by excellent fastness properties. Orchem D. & C. Pontachrome Dyes: A line of colors for wool and nylon. Dyed by forming chromium lakes on the fiber. Orchem D. & C. Pontacyl Dyes: A line of acid colors for wool, nylon, silk,, leather, paper and some types of Orion acrylic fiber. Dyed in an acid bath. Produces bright shades and are used largely on materials for women's wear, bathing suits, sweater yarns, upholstery fabrics, etc. Orchem D. & C. Pontamine Developers TN, ZN: Products used as developing agents in the application of the diazo types of dyes. Used generally on textile fibers other than wool and acetate. Orchem D. & C. Pontamine Diazo Dyes: Direct dyeing colors. After dyeing, they are diazotized and developed with var ious Pontamine developers, with resultant improve ment in fastness, particularly fastness to washing. Used extensively on cellulosic fabrics which are to be printed subsequently with discharge patterns. Orchem D. & C. Pontamine Dyes: A line of direct colors used ex tensively for cellulosic textiles and paper. Also ap plied on leather. Orchem D. & C. Pontamine Fast Dyes: Direct dyeing colors of ex ceptionally good fastness to light. Orchem D. & C. Pontamine Whites: Fluorescent whitening agents that produce brilliant optical bleaches having out standing wetfastness properties when applied to cot ton and rayon. Also used in soaps, detergents, etc. Orchem D. & C. Roracyl Dyes: A group of soluble dyes that have good affinity and fastness properties on leather. Orchem D. & C. Rotalin Dyes: A line of spirit-soluble printing colors. Used principally in the printing of glassine and other types of paper and cellophane. Orchem D. & C. Savalux Fast Colors: A group of textile dyes care fully selected to give outstanding fastness commensu rate with the end uses on specific fabrics. These prod ucts are used in conjunction with the Savalux fast color quality control program. Orchem D. & C. Sevron Dyes: A line of cationic dyes especially suited for dyeing Orion and other acrylic fibers, having out standing fastness and brilliance. Orchem D. & C. Sulfanthrene Dyes: A line of thioindigoid vat dyes characterized by good fastness properties. Used 54 DUP210011199 DYES-ELECTROPLATING DYES (Cont.) principally for the dyeing and printing of cotton and rayon. Orchem D. & C. Sulfogene Dyes: A line of sulfur colors; dyed from a solution of sodium sulfide. Used extensively on cotton fabrics and to alimited extent on rayon and other materials. Orchem D. & C. DYES, PETROLEUM: See Petroleum Chemicals, Dyes, Petroleum, page 113. DYMETROL CONTINUOUS PRECISION FORMS: See Plastics, Dymetrol, page 126. DYNAMITES: See Explosives, page 62. E 808, 833 ACCELERATORS: See Accelerators for Natural and Synthetic Rubber, page 7. ELA (ELASTOMERS LUBRICATING AGENT): See Miscellaneous Chemicals for Natural and Synthetic Rubber, page 104. ELASTOMER CHEMICALS: See Accelerators, page 1; Activator, page 5; Antioxidants, page 15; Blowing Agents, page 23; Chemical Peptizers, page 39; Miscel laneous Chemicals, page 104; Polymerization Chemicals, page 129; Protective Agents, page 131; Retarder, page 137; Wetting Agents, page 163--all for Natural and Synthetic Rubber. ELASTOMERS: See Synthetic Rubber, Adiprene, page 146; Hypalon, page 147; Neoprene, page 147; Nordel, page 149; Viton, page 150. ELCHEM ADDITION AGENTS: See Electroplating Prod ucts, page 55. ELCORD DELAY UNITS: See Explosives, Blasling Ac cessories and Supplies, page 60. ELECTRICAL SUPPLIES: See Surplus Materials, page 146. ELECTROLYTE ACID: See Acids, Battery Acid, page 3. IELECTRONIC MATERIALS Conductive Silver Preparations: Specially com pounded materials containing silver powder in a suit able vehicle, with or without ceramic flux; can be coated on base materials such as titanate bodies, mica, glass, porcelain, steatite, plastics, wood, cloth, and paper by stencil screening (squeegee), spraying, dipping, brushing, roller coating, banding wheel or other suitable method. Types for air drying, baking at low temperatures and firing at elevated temperatures. USE: To produce electrodes for ceramic and mica capacitors; to metallize ceramic and glass substrates for subsequent electroplating; to produce solder seals; for metallizing plastics for electrical shielding, electro plating, and electroforming; and to produce printed circuitry on ceramic and glass bases. CONTAINERS: Paste, qt. and gal. cans; liquid, pt., gal. and 50-oz. wide-mouth qt. bottles. Eiectrochem. Gold Preparations: Special compositions for applica tions where ability to withstand strong acids and resistance to migration is required. USE: For bonding transistors and diodes to headers ana lead wires; to produce special gold metallized ceramic and mica capacitors and for printed circuits. CONTAINERS: ]-, 3-, 8-, 16-, 24- and 32-oz. jars. Eiectrochem. Palladium and Platinum Preparations: Special compositions for metallizing fired and unfired elec tronic ceramic bases where the high melting point and resistance to migration of these metals are required. USE: To produce electrodes for ceramic capacitors; to prepare solderable printed circuitry and terminations for glaze resistors on fired ceramic substrates. CON TAINERS: 1-, 3-, 8-, 16-, 24- and 32-oz. jars. Eiectrochem. Perone30 Hydrogen Peroxide (Electronic Grade): See Hydrogen Peroxide, page 92. Resistor Compositions: Specially treated semi conducting metal powders compounded with glass binders and temporary organic carriers. Can be ap plied to glass or ceramic surfaces by stencil screen ing (squeegee), spraying, brushing or dipping. Firing range 1300 --1400 F. (700--760C.). Resistance of 1 to 20,000 ohms/square compositions can be blended with members of the same series to produce inter mediate resistance values. Fired resistors have good reproducibility, low temperature and voltage coeffi cients, and stability to abrasion, moisture and rela tively high (257F.; 125C.) ambient temperature. USE: To produce fired-on resistor components for elec tronic circuits. CONTAINERS: 1-, 3-, 8-, 16-, 24 and 32-oz. jars. Eiectrochem. Silver Powder--Ag: Finely divided silver powder, 99+% silver; with or without added flux. USE-. Prepa ration of conductive silver preparations. CONTAINERS: 5-oz. bottles; qt. and gal. cans. Eiectrochem. Trich/orefhy/ene, Missi/e Electronic Grade: Trichlorethylene, page 158. ELECTROPLATING PRODUCTS: Addition Agent 774: Pale amber, slightly viscous water solution of organic wetting agent; faint amine odor; mildly alkaline. USE: As antipitting agent with Coppralyte plating salts; as antifume agent with Durobrile zinc plating. CONTAINERS: 9-lb. bottles (1 gal.) and 125-lb. drums. Eiectrochem. i DUP210011200 ELECTROPLATING ELECTROPLATING (Cont.) Cadalyte Bright Dip: Clear, colorless liquid; cor rosive; miscible with water. Diluted with 15-30 parts of water for dipping solution. USE: To brighten cad mium deposits by "bright dipping"; to add a tarnishresistant film on surface of cadmium plate. CONTAIN ERS: 135-lb. fiber/polyethylene drums. Electrochem. Cadalyte Brightener: Light brown, fine powder. IJ-SF: In cyanide cadmium plating baths for maintain ing high covering power of bath and brilliancy and uniformity of deposits. CONTAINERS: 5-, 25- and 50-lb. steel or fiber drums. Electrochem. Cadalyte Maintenance Compound: Buff-colored, free-flowing, fine powder; water-soluble. Contains Cadalyte brightener and sodium cyanide in propor tions consumed in cadmium plating. USE: Replenishing Cadalyte cadmium plating baths. CONTAINERS: 100-lb. steel or fiber drums. Electrochem. Cadalyte Plating Salts: Reddish-brown powder consisting of a mixture of sodium cyanide, cadmium oxide and brighteners; contains approximately 19.2% cadmium. Free-flowing, water-soluble, stable. USE: To prepare a cadmium plating bath which deposits cadmium in a bright, ductile, adherent form on iron and steel to prevent rusting and corrosion. CON TAINERS: 50-lb. steel or fiber drums. Electrochem. Carbonate Remover: Fine, white, free-flowing powder. Slightly soluble in water. USE: To remove carbonates from cyanide plating solutions. CONTAIN ERS: 100-lb. bags. Electrochem. Copper Cyanide (Cuprous Cyanide)--Cu2(CN)2: A creamy white powder; insoluble in water; soluble in sodium cyanide and potassium cyanide solutions; copper content min. 70%; cyanogen content min. 28.5%. U5E: In copper and brass cyanide electro plating solutions. CONTAINERS: 100-lb. fiber drums. Electrochem. Copper Plating Addition Agents: See Electroplating Products, Addition Agent 774, Coppralyte Addition Agent 1085, Dacolyte Addition Agent and Elchem 1393, Elchem 1396, Elchem 1442 and Elchem 1442M Addition Agents, below. Coppralyte Addition Agent 1085: Pale amber, slightly viscous water solution of organic wetting agents; taint amine odor; mildly alkaline. USE: As antipitting agent for Coppralyte copper plating. CONTAINERS: 9-lb. bottles (1 gal.) and 125-lb. fiber drums. Electrochem. Coppralyte Plating Salt-Potassium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 25.4%; free KCN min. 1.25%, max. 3.0%. USE: For preparing Coppralyte copper plating baths for producing smooth, bright, heavy, adherent coatings of copper on steel, zinc castings, wire and other parts. CONTAINERS: 100-lb. fiber drums. Electrochem. Coppralyte Plating Salt-Sodium Formulation: White powder; gives alkaline solution in water. Copper content (as Cu) min. 27.0%; free NaCN min. 0.4%, max. 2.0%. USE: For preparing Coppralyte copper plating baths for producing smooth, bright, heavy, adhereni coatings ot copper on steel, zinc castings, wire and other parts. CONTAINERS: 100-lb. fiber drums. Electrochem. DacolyteTM Addition Agent: Dark brown, amor phous, fine powder; sharp odor; water-soluble. USE: In acid copper plating solutions for heavy deposits only. Assists in producing smooth copper deposits free from nodules or trees. CONTAINERS: 5-, 10-, 25- and 50-lb. fiber containers. Electrochem. Durobrite Addition Agent 309: Clear amber liquid containing approximately 10% solids. USE: Brightening agent for cyanide zinc plating. Improves covering power by extending the bright plating range to low current density areas. CONTAINERS: 45-lb. polyethylene drums. Electrochem. Durobrite Special Brightener: Cream-colored powder, soluble in water. USE: In cyanide zinc barrel plating solutions to produce brilliant blue-white de posits. CONTAINERS: 50-lb. fiber drums. Electrochem. Elchem 1393 Addition Agent: Grayish-white powder containing potassium cyanide and selenium; slightly hygroscopic, water soluble, stable. USE: As a brightening agent in cyanide copper plating baths. CONTAINERS: 25- and 100-lb. fiber containers. Electrochem. Elchem 1396 Addition Agent: Dark amber liquid; mildly alkaline. USE: As a brightener and antipitting agent in cyanide copper plating baths. CONTAINERS: 45-lb. polyethylene drums and 125-lb. packages. Electrochem. Elchem 1442 Addition Agent: Mildly alkaline solu tion containing potassium cyanide and selenium. USE: Asa brightening agent and leveling agent in cyanide copper plating baths. CONTAINERS: 40-lb. pails and 450-lb. steel drums. Electrochem. Elchem 1442M Addition Agent: Description and uses same as those of Elchem 1442, above. Electrochem. Electropolishing Solution: A clear, dark amber, corrosive liquid; glycolic acid-sulfuric acid formula tion; acid content 85%; F. P. below 32F. (0C.); non flammable and nonexplosive; miscible with water. USE: In electropolishing stainless steel over a wide r! DUP210011201 ELECTROPLATING-ENGENAMEL ELECTROPLATING (Cont.) current density range, CONTAINERS: 180-lb. fiber/ polyethylene drums. Eiectrochem. Halogen Tin Addition Agent 2 Special: Clear color less liquid; miscible with water; stable. USE: In halogen tin plating process for brightening and controlling deposit. CONTAINERS: 420-lb. steel/polyethylene drums. Eiectrochem. Halogen Tin Plating Process: An acid tin plating process, using bivalent tin salts and tin anodes. USE: For continuous tin plating on steel strip. Bath permits high current densities and rapid plating. Eiectrochem. Polysuifid e: A sodium sulfuret similar to liver of sulfur, having a sodium base instead of a potassium base. Yellow to yellow-green powder; sodium poly sulfide content min. 56%; total sulfur min. 50.7%. USE: For coloring copper and brass; for stripping copper plated deposits; for purifying cyanide plating solutions. CONTAINERS: 60-lb. cases (six 10-lb. tins) and 100-lb. drums. Eiectrochem. Potassium-Copper Cyanide Double Salt: White crystalline complex salt of copper cyanide and potas sium cyanide; readily soluble in water or cyanide plating solution. Copper content min. 25.8%. USE: For preparing and maintaining cyanide copper plat ing baths based on potassium cyanide. CONTAINERS: 100-lb. fiber drums. Eiectrochem. Potassium Cyanide-KCN: See Potassium Cyanide, page 129. Sodium-Copper Cyanide Double Salt: White crys talline complex salt of copper cyanide and sodium cyanide; readily soluble in water or cyanide plating solution. Copper content min. 28.7%. USE: For pre paring and maintaining cyanide copper plating baths based on sodium cyanide. CONTAINERS: 100-lb. fiber drums. Eiectrochem. Sodium Cyanide: See Sodium Cyanide,page 142. Sodium Sulfocyanide: See Sodium Sulfocyanide, page 143. Zinc Cyanide-Zn(CN)2: Stable white powder; soluble in alkalies, in sodium and potassium cyanide solutions and in dilute mineral acids with production of hydro gen cyanide. Insoluble in water and alcohol; decom poses on heating. Zinc content min. 55%; cyanogen content min. 40%. USE: In zinc and brass electro plating solutions; as a chemical reagent. CONTAINERS: 100-lb. fiber drums. Eiectrochem. Zinc Plating Addition Agents: See Electroplating Products, Durobrite Addition Agent 309 and Duro- brife Special Brightener, above; Zin-O-Lyte Bright- eners and Zin-O-Lyfe Special Zinc Barrel Brightener, below. Eiectrochem. Zin-O-Lyte Brighteners: Organic addition agents; fine powder; water-soluble. USE: In cyanide zinc plating baths to increase deposit brightness and current efficiencies of the bath and to widen the bright current density range. CONTAINERS: 50- and 100-lb. fiber drums. Eiectrochem. Zin-O-Lyte Salts: Fine white powder containing sodium cyanide and other chemicals in proportions required for the Zin-O-Lyte zinc plating bath. USE: In preparing Zin-O-Lyte zinc plating baths for still or barrel operation. CONTAINERS: 100-lb. steel or fiber drums. Eiectrochem. Zin-O-Lyte Special Zinc Barrel Brightener: Or ganic addition agent; fine powder; waler-soluble. USE: In cyanide zinc barrel plating solutions to increase deposit brightness and current efficiencies. CONTAIN ERS: 50- and 100-lb. fiber drums. Eiectrochem. ELECTROPOLISHING SOLUTION: See Electroplating Products, page 56. ELVACET POLYVINYL ACETATE EMULSION: See Resins (Not Molding), page 134. ELVACET POLYVINYL ACETATE SOLUTION (ELVACET 60-05): See Resins (Not Molding), page 135. ELVANOL POLYVINYL ALCOHOL: See Resins (Not Molding), Elvanol, page 135. ELVAX VINYL RESINS: See Resins (Not Molding), Elvax, page 135. EMULSIFYING AGENT A: An oil soluble composition designed tor use in preparation of emulsifiable oil formulations of weed killers and other pesticides. CON TAINERS: 1-gal. cans and 5-gal. drums (non-returnable). Ind. & Bio. -Bio. EMULSIFYING AGENTS: See Alkanol, page 6, Duponol, page 52; Lorol 24, page 100; Resins (Not Molding, Elvanol, page 135; Wetting Agents for Nat ural and Synthetic Rubber, Aquarex G, page 7 63. ENAMEL PIGMENTS: See Ceramic Products, page 27; Pigment Colors, page 124; Titanium Dioxide Pigments, page 153. ENAMELS (EXCEPT GLASS): See Finishes, page 68. ENAMELS, GLASS: See Ceramic Products, page 27. ENDORTM RUBBER PEPTIZER: See Chemical Peptizers For Natural and Synthetic Rubber, page 39. ENGENAMEL: See Finishes, Industrial, page 74. 57 DUP210011202 ENGINE-EXPLOSIVE ENGINE CLEANER AND DEGREASER: See Automotive Specialties 7 Products, page 19. ETHYLENE-VINYL ACETATE COPOLYMER: See Resins (Not Molding), Elvax Vinyl Resin, page 135. ENGINEERING REPRODUCTION FILM: See Photo graphic Products, page 116. EPN 300 INSECTICIDE: See Insecticides, page 94. ETHYL KETONE: Sold as 4,4'-Bis(diethylamino)benzo- phenone Technical, a Chemical Intermediate. Orchem D. & C. EPN TECHNICAL: See Insecticides, page 94. EQUIPMENT AND Materials,page 146. MACHINERY: See Surplus ETHANOIC ACID: See Acids, Acetic Acid, page 3. p-ETHOXYANILINE: Sold as p-Phenetidine Technical, a Chemical Intermediate. Orchem D. & C. 6-ETHOXY-2-MERCAPTOBENZOTHIAZOLE TECHNI CAL: Orange Thiazole. Crushed solid form; a Chem ical Intermediate. Orchem D. & C. 2- ETHOXY-a-NAPHTHYLAMINE TECHNICAL: Cast solid form; a Chemical Intermediate. Orchem D. & C. 2 - ETHOXY - a - NITRONAPHTHALENE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. 3- ETHYLAMINO-p-CRESOL PASTE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. ETHYL MERCURY CHLORIDE: See Seed Treatments, Ceresan 2%, page 139. ETHYL MERCURY p-TOLUENE SULFONANiLIDE: See Seed Treatments, Ceresan M and Ceresan M-DB, page 139. ETHYL METHACRYLATE: See Methacrylate Monomers, page 102. ETHYL METHACRYLATE POLYMER: See Resins (Not Molding), Lucite 2042, page 136. N-ETHYL-ALPHA-NAPHTHYLAMINE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. N-ETHYL-N-PHENYLBENZYLAMINE: Sold as N Ethyl N-benzylaniline Technical, a Chemical Intermediate. Orchem D. & C. 3-ETHYLAMINO-p-TOLUENESULFONIC ACID TECH NICAL: Ethyl-o-toluidine-p-sulfonic acid; Granular solid form; a Chemical Intermediate. Orchem D. & C. N-ETHYLANILINE TECHNICAL:Liquid form; a Chem ical Intermediate. Orchem D. &C. ALPHA-(N-ETHYLANILINO) - m - TOLUENESULFONIC ACID TECHNICAL: Ethylbenzylaniline sulfonic acid. Granular paste form; a Chemical Intermediate. Orchem D. & C. N-ETHYL-N-BENZYLANIL1NE TECHNICAL: N-Ethyl-N- phenylbenzylamine. Liquid form; a Chemical Inter mediate. Orchem D. &C. ETHYLBENZYLANILINE SULFONIC ACID: Sold as alpha-(N-Ethylanilino)-m-1oluenesulfonic acid tech nical, a Chemical Intermediate. Orchem D. & C. N-ETHYL-N-BENZYL-m-TOLUIDINE TECHNICAL: N Benzyl-N-ethyl-m-toluidine. Liquid form; a Chemical Intermediate. Orchem D. & C. N-ETHYL-m-TOLUSDINE TECHNICAL: Liquid form, a Chemical Intermediate. Orchem D. & C. N-ETHYL-o-TOLUIDINE TECHNICAL: Liquid form, a Chemical Intermediate. Orchem D. & C. ETHYL-o-TOLUIDINE-p-SULFONIC ACID: Sold as 3- Ethylamino-p-toluenesulfonic acid Technical, a Chem ical Intermediate. Orchem D. & C. ALPHA - (N - ETHYL - m - TOLUIDINO) - m - TOLUENE SULFONIC ACID TECHNICAL: Ethylbenzyl-m- toluidinesulfonic acid. Granular solid form; a Chemical Intermediate. Orchem D. & C. ETHYL-P-NITROPHENYL THIONOBENZENE PHOSPHONATE: See Insecticides, EPN, page 94. EUREKA SOLDERING FLUX: See Flux, Soldering, page 84. EUTECTIC CURING AGENT: See DPI-7, page 51. ETHYLBENZYL-m-TOLUIDINESULFONIC ACID: Sold as alpha-(N-Ethyl-m-toluidino)-m-toluenesulfonic acid Techn>cal; a Chemical Intermediate. Orchem D. & C. EXPERTTM TRAP: See Traps and Targets, page 158. EXPLOSIVE RIVETS: See Rivets, Aircraft and Industrial, page 137. 58 T DUP210011203 EXPLOSIVES Explosives sold by the Explosives Products Sales Division of the Explosives Department are classified as follows: Bl a c k Bl a s t in g Po w d e r , page 59 Bl a s t in g Ac c e s s o r ies a n d Su p p l ie s including Blasting caps, page 59 Delay Units, page 60 Delay Assemblies, page 60 Fuses and Fuse Lighters, page 60 Blasting Instruments, page 60, 61 BLASTING AGENTS, page 61 to page 62 Dy n a mit es , page 62 to page 63 Pe r mis s ib l e Ex p l o s iv e s , page 63. Black Blasting Powder A Blasting Powder (Saltpeter): A composition of potassium nitrate, charcoal, and sulfur. Available in a wide range of grain sizes. USE: For fireworks; for blasting dimension stone and architectural stone; for quarrying slate; for use in safety fuses. CON TAINERS: 25-lb. kegs. Explo. -E.P.S. B Blasting Powder--Granular (Soda): A composi tion of sodium nitrate, charcoal, and sulfur. Available in a wide range of grain sizes. USE: For coal mining (principally); for construction work when dry; for clay mining and open pit ore mining. CONTAINERS: 25-lb. kegs. Explo. -E.P.S. B Blasting Powder--Pellet (Soda): An improved deflagrating explosive. USE: In mining coal where permissibles are not needed. Made in two grades in cylinders 2 in. long, with a central perforation of % in. Four of these cylinders are placed end to end and wrapped in paraffined paper to form cartridges. Available in diameters from 114 to 2 in. Explo. -E.P.S. Blasting Accessories and Supplies Aeudet Mark V Electric Delay Blasting Caps: See Blasting Caps, Electric, directly below. Blasting Caps: Blasting Caps: Small aluminum cylinders, closed at one end and loaded with a charge of fulminating compound, which is exploded by the spit or sparks from a safety fuse. Furnished in two strengths: No. 6 and No. 8, No. 8 being the stronger. USE: For firing high explosives with safety fuses. CONTAINERS: 25 and 100 caps per box. Explo. -E.P.S. Blasting Caps, Electric: No. 6 and No. 8 strengths, designed to be exploded by electric current. Nylon plastic insulated copper or iron wires. Lengths of wires range from 4 ft. up for copper and from 4 to 20 ft. for iron. USE: For firing high explosives elec trically. CONTAINERS: 25 and 50 per carton. Explo.-E P S. Aeudet Mark V Electric Delay Blasting Caps; A series of 14 regular delay periods, plus a "0" period, in which overlapping is eliminated so that an assured time interval is provided between succes sive periods to allow proper rock movement in underground blasting. Packed 25 and 50 per carton. Explo.-E.P.S. Coal Mine Delay: Special series of short period delay. Each period is identified by color-coded band and leg wire insulation color and meets all Bureau of Mines requirements for short period blast ing in coal mines. Explo.-E.P.S. MS Delay: Similar to delay blasting caps but having time intervals of 25, 50 or 100 milliseconds (approximately) between periods. CONTAINERS: 25 and 50 per carton. Explo.-E.P.S. SSSTM Seismograph: No time lag between sever ance of ridge wire and firing of the cap. USE-. Especially developed for shooting explosive charges in oil prospecting. CONTAINERS: 5, 10, 25 and 50 per carton depending on wire length. Explo.-E.P.S. * Blasting Galvanometer: A small direct reading ohmmeter contained in a leather case. USE: To determine resistances of electric blasting caps, electric squibs, leading wire and the completed blasting circuit. Explo. -E.P.S. Blasting Machines: Used for the generation of current for the firing of electric blasting caps, electric squibs, etc. Types of machines are as follows: RATED CAPACITY Str. Par. Par. Series Series *CD-12-1 NR NR 30 * CD-32-1 30 480 125 * CD-48-1 60 1200 200 *No. 10 Twist NR NR 10 * Permissible Multiple Type NR NR 10 *Permissible Multiple Type NR NR 20 * Pushdown No. 30 NR 150 30 *Pushdown No. 50 NR 250 50 5S-1000 NR 1000 (NR signifies not recommended) Explo. -E.P.S.* * Indicates Resale Product. 59 DUP210011204 rT EXPLOSIVES EXPLOSIVES (Cont.) `Blasting Switch: Used for the power firing of blasts. Especially designed from the standpoints of safety and reliability. Explo. -E.P.S. *Cap Crimper (No. 4): Makes waterproof crimp on a cap when a smooth surface fuse is used. Equipped with fuse cutter. Explo. -E.P.S. *Cap Crimper, Superior: Bench type cap crimper which produces waterproof crimp. Hand or foot op erated. Equipped with fuse cutter. Explo.-E.P.S. Coal Mine Electric Delay Blasting Caps: See Blast ing Caps, Electric, page 59. `Connecting Wire: No. 20 and No. 22 gauge copper wire with plastic insulation. USE: To connect an elec tric blasting cap of one hole to another hole when the attached wires are not long enough. Explo. -E.P.S. blockhole secondary blasting with the added fea ture of remote firing. Ideal for use in thunder storm season and not affected by stray currents. Expio. -E.P.S. Jet Tappers: Shaped charges for tapping open- hearth or electric steel furnaces. CONTAINERS: 20 per carton. Explo. -E.P.S. `Leading Wire: No. 14 and No. 16 gauge solid copper wire, insulated with plastic. USE: As connecting source of electric current to blasting cap circuit. CONTAINERS: 125-, 250- and 500-ft. lengths. Explo. -E.P.S. Ledcore Delay Assemblies: Nonelectric, bottom hole, delay detonators which prevent premature initia tion from extraneous electricity in any blasting opera tion. Available in virtually any length with 10-ft. minimum. Explo.-E.P.S. Detonators (Fuses and Primers): See Explosives, Blasting Accessories And Supplies, Blasting Caps, page 59. t`"E-Cord": Low-cost detonating fuse consisting of a fabric tube 0.162 in. in diameter filled with PETN, a high explosive. Detonates with plain or electric blasting cap at a velocity of 18,000 ft. per sec. For detonating cap sensitive dynamites in secondary blasting. CONTAINERS: Spools containing 1,000 ft. Explo. -E.P.S. Low Noise Level Delay Initiation System: A surface delay system comprising LEDC (Low Energy Detonating Cord) and 0, 10 or 15 millisecond delay connectors. LEDC contains such a small charge that 150 feet makes no more noise than 2 in. of regular "Prima- cord." Explo.-E.P.S. `Portable Magazines: Sectional steel construction; made in various sizes from 5- to 150-ton capacity. USE: For storing high explosives, blasting powder and blasting caps. Explo.-E.P.S. Elcord Delay Units: Employed with Nitramon S in t*"Primacord" Detonating Fuse: Consists of a seismic prospecting. Permit matching ground velocities fabric tube about 0.21 in. in diameter, filled with in the range 5,000-10,000 ft. per sec. USE: To pentaerythrite tetranitrate (PETN), a high explosive. minimize "ghost" reflections and improve signal-to- Detonates with plain or electric blasting cap at a noise ratio. Explo.-E.P.S. velocity of 20,300 ft. per second. Four types: Plain, Fuse Lighters Reinforced, Plastic Reinforced and Plastic Wire Coun tered. USE: For firing large blasts and deep well drill Hot Wi re: Similar to toy sparkler. Has black powder composition on an iron wire. Explo. -E.P.S. holes. CONTAINERS: Spools containing 500 or 1,000 ft. Explo.-E.P.S. t"'Primacord" MS Connectors: Device for insertion `Ignitacord and Thermalite Ignitacord: Cordlike into "Primacord" lines. USE: To provide delays of materials which burn with a hot external flame. approximately 0.005, 0.009 or 0.017 second. CON i Used for igniting fuse so as to obtain rotational TAINERS: 50 per tube, 500 per carton. firing. Explo.-E.P.S. Explo.-E.P.S. Lead Spitter: A tube of lead filled with black `Rheostat: An electric resistance bridge, having six powder. Explo.-E.P.S. binding posts and five different units of resistance wire between. USE: To determine when a given blast MS Electric Delay Blasting Caps: See Blasting ing machine is working at its rated capacity. Caps, Electric, page 59. Explo.-E.P.S. `Quarrycord: Similar to Ignitacord but specially constructed to burn at a speed of about one foot per second. Used for igniting fuse in multiple `Safety Fuse (Bickford's Fuse): Consists of a core of A type black powder enclosed in several wrappings of jute and cotton threads with waterproofing asphalt* fTrademark of the Ensign-Bickford Company indicates Resale Product. * Indicates Resale Product. tTrademark of the Ensign-Bickford Company. 60 DUP210011205 EXPLOSIVES EXPLOSIVES (Cent.) type layers between the wraps. Many different types and brands are available. USE: For single blasts With black powder; for firing other explosives in conjunc tion with a blasting cap. Explo.-E.P.S. * Sectioning Switch: Used as a safety switch in blast ing lines for power firing circuits. Explo.-E.P.S. 5S5TM Seismograph Electric Blasting Caps: See Blasting Caps, Electric, page 59. * Tamping Bags: Heavy kraft paper bags, glued with waterproof cement; sizes from 1 % to 7 in. in diameter and 8 to 24 in. in length. USE: To hold sand, clay, etc., for stemming (confining) the charges of explosives in bore-holes. CONTAINERS: Bale lots of 5,000. Explo.-E.P.S. * Voltohmeter: A combined blasting galvanom eter, stray current detector and AC-DC voltmeter. USE: Serves the same purposes as the blasting gal vanometer and offers a means for guarding against stray currents of a magnitude which would be hazard ous in electric blastings. It also offers a means of checking line voltages in power blasting circuits. Explo.-E.P.S. Blasting Agents Nil ife 101 Nitro Carbo Nitrate: A low cost, free- running blasting agent, having a density from 0.70 0.75. USE: For blasting in quarries, strip mines, con struction work where water resistance is not needed. CONTAINERS: 50-lb. paper bags. Explo.-E.P.S. Nilite 202 Nitro Carbo Nitrate: A low cost, free- running blasting agent, having a density of from 0.85--0.90. USE; For blasting in quarries, strip mines, construction work where water resistance is not needed. CONTAINERS: 50-lb. paper bags. Explo.-E.P.S. Nilite 303 Nitro Carbo Nitrate: A free-running, oxygen-balanced blasting agent especially designed for pneumatic loading in underground blast holes. Non cap-sensitive and non water-resistant. CON TAINERS: Package; 50-lb. paper, plastic, or pre-lined burlap bags. Explo.-E.P.S. Nilite HV Nitro Carbo Ni trate: A low-cost, free- running blasting agent having a density of 1.15 de signed for high density load to improve fragmentation in massive or tough shooting formations and to reduce drilling costs in abrasive, medium-hard rock forma tions. Explo.-E.P.S. Nilite ND Nitro Carbo Nitrate: A low-cost, free- running blasting agent having a density of 0.50 de- * Indicates Resale Product. 61 signed to eliminate decks in loading or as a top load providing energy without concentration, thus reducing noise and throw. Explo.-E.P.S. Nitramex No. 2-H Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge hammers or heat, but rather by specially constructed primers. USE: For blasting in extremely hard shooting quarries and strippings. CONTAINERS: Metal cans 4Vi -9-in. diameter x 24 in. Explo.-E.P.S. Nitramex HD Blasting Agent: A blasting agent with a density of 1.9 to assure maximum fragmenta tion and minimum toe in massive or tough shooting formations. When supplemented with Pelletol, a maximum base load is attained. Explo.-E.P.S. Nitramite FR Nitro Carbo Nitrate: A free-running blasting agent, having a density of 0.85-0.95. USE: For blasting in quarries, strip mines, construction work. CONTAINERS: 50-lb. paper bags. Explo.-E.P.S. Nitramite Nitro Carbo Nitrate: Variable density blasting agent similar to Nitramon; packed in heavy paper shells. Nitramite is as insensitive to shock and friction as Nitramon. It must be detonated by a specially constructed primer. USE: Excellent for rela tively easy shooting material, top loads, and for cer tain coyote shot layouts. CONTAINERS: 3-9-in. diameter paper shells. Explo.-E.P.S. Nitramon Blasting Agent: A blasting agent which is not detonated by impacts from rifle bullets, sledge hammers, the strongest commercial blasting cap or by heat, but rather by specially constructed primers. USE: For blasting in quarries and stripping operations. CONTAINERS: Metal cans 4'/2 -9-in. in diameter. Explo.-E.P.S. Nitramon No. 2 Blasting Agent: A blasting agent having all the safety features of and in all respects similar to Nitramon, except that it is of lower strength and velocity and sells at a lower price. Like Nitra mon, if is detonated only by specially constructed primers. USE: For blasting in quarries and stripping operations. Especialy adapted for top hole loading. CONTAINERS: Metal cans 4 >2 -9-in. in diameter. Explo.-E.P.S. Nitramon HH Blasting Agent: Same general properties as Nitramon but highly heat-stable. USE: Strip blasting over burning coal. CONTAINERS: Cans 4V2 -9-in. in diameter. Explo.-E.P.S. Nitramon S Blasting Agent: Has the same char acteristics as Nitramon, but is packed in cans which screw together to form a rigid charge. USE: For seis mic prospecting. CONTAINERS: 2 in. x 1 lb., 2'/i in. x 1 lb. Explo.-E.P.S. ' ij r- * Y a' .'OiA' cx | JAC i\-3OK LAB 0 RAT 0R LIBRARY DUP210011206 EXPLOSIVES EXPLOSIVES (Cont.) Nitramon WW Blasting Agent: Same character istics as Nitramon. USE: For seismic prospecting at sea. CONTAINERS: 10-, 16%-, 25-, 30-, 40- and 50-lb. cans. Explo.-E.P.S. Nitramon WW EL Blasting Agent: Same char acteristics as Nitramon WW. Designed especially for offshore use, it gives over 50% more useful seismic energy than any materia! previously used offshore. CONTAINERS: 5-, 10-, 16%-, 20-, 25-, 33'A-, 40-, and 50-lb. cans. Explo.-E.P.S. Pelletol No. 1: Free-running, non-nitroglycerin, completely waterproof explosive. Ve-\n. pellets with particle density of 1.6 for supplementing cartridged or canned products in hard shooting areas to assure maximum loading density or for loading partially blocked holes. Can be primed with 114 x 8 cartridge dynamite. Explo.-E.P.S. Primer for Nitramon and Nitramex No. 2-H Blasting Agents: USE: Special primer for detonating Nitramon and Nitramex No. 2-H. Must be initiated by "Primacord" detonating fuse. CONTAINERS: Metal cans 4-, 5-, 5 16 7- and 8-in. diameter X 24 in. Explo.-E.P.S. Primer for Nitramon S Blasting Agent: Primers which screw tightly to Nitramon S. Detonated by electric blasting cap or "Primacord." USE: To detonate Nitramon S in seismic prospecting. CONTAINERS: 2 in. x lib., 216 in. x lib. Explo.-E.P.S. SP-2 Prills: Low-cost product comparable to any other in the field; resists setting in storage. Very uniform in particle size. USE: Especially designed for blasting; will give good breakage in medium rock and as top loads in hard rock (when 6% fuel oil is added). CONTAINERS: Package; 50- and 80-lb. paper or poly ethylene bags or bulk. Explo.-E.P.S. Tovex and Super Tovex Gels: Non-nitroglycerin, water compatible explosives having densities of 1.4 and 1.7, respectively. Noncap-sensitive and must be fired by suitable primers such as HDP or regular Nitramon primers. USE: Anywhere a high density, high velocity, water resistant bottom load is required. Explo.-E.P.S. Tovex A-2, A-4, and A-6: Non-nitroglycerin water compatible explosives with varying densities; greater energy than Tovex and Super Tovex. Noncap-sensitive and must be fired by suitable primers. USE: As bottom loads in toughest blasting conditions. Explo.-E.P.S. Water Work Booster: Small copper tubes containing a priming charge which are inserted in a copper well in the Nitramon WW cans. Detonated by an electric blasting cap. USE: To bring about the explosion of Nitramon WW. CONTAINERS: Cartons of 50 and cases of 500. Explo.-E.P.S. HDP Pri mers: High detonation pressure units for priming noncap-sensitive products in holes 2 in. in diameter or larger. Available in Vt -, %- and 1-lb. sizes as HDP-3, HDP-S and HDP-1 respectively. HDP-S primer recommended for seismic exploration. Explo.-E.P.S. Dynamites Blasting Gelatin (S.N.G.): Solidified nitroglycerin. A rubbery, elastic substance, resembling printers rolls or art gum in appearance. It is the strongest commer cial explosive. USE: In shooting oil wells. CONTAINERS: 28.5-lb. (10 qt.)and 57-lb. (20 qt.) cases, 50-lb. cases for use other than in oil wells. Explo.-E.P.S. Ditching Dynamite: A 50% straight dynamite, especially packed so that it will have the greatest possible uniformity, cartridge for cartridge, and will give the best results in propagation ditching. Explo.-E.P.S. Extra Dynamite: Ammonia dynamites ranging from 115 to 172 cartridges (114 x 8 in.) per 50-lb. case. Available in both "high" and "low" velocity types. USE: In mining soft ores, limestone, gypsum, salt, clay, etc.; in quarrying as top loads in well drill holes and as blockhole charges in secondary blasting. Explo.-E.P.S. Gelatin Dynamite (Straight Gelatin): A plastic, highly water resistant, dense explosive furnished in grades from 20-90% strengths. USE: For blasting in wet boreholes; for submarine blasting and blasting in quarries; for tunneling, shaft sinking and mining hard, tough materials. Explo.-E.P.S. Gelex Dynamites: Semigelatin dynamites having plasticity and water resistance between the dynamites and true gelatins. USE: In mining metallic ores, gypsum, limestone and in quarrying. Explo.-E.P.S. Hi-Cap Dynamite: A series of low cost ammonia dynamites, ranging from 120-150 cartridges per 5Q-!b. case in the 114 x 8 in. size. USE: In mining and quarrying the softer ores and materials such as limestone, gypsum, salt, clay, etc. Explo.-E.P.S. Hi-VelocityTM Gelatin: A I ow density straight gelatin which has the property of always exploding at a very high velocity. This is not the case with most gelatins, which have a low velocity unless strongly confined in a borehole or detonated by a straight 60% primer. USE: Oil, gas and water well shooting, submarine blasting, mudcapping. Explo.-E.P.S. 62 DUP210011207 EXPLOSIVES-FABRIC EXPLOSIVES (Cont.) Hi-VelocityTM Seismograph 60% Gelatin: A straight gelatin especially designed and packaged for use in seismic prospecting. Recommended for deep hole work and lengthy water exposures. Offered in plain or Fast-Coupler cartridges. Explo.-E.P.S. Loggers Powders: 15-30% strengths. USE: Blasting stumps for the logging industry in the Pacific North west. Explo.-E.P.S. Nitroglycerin-C3H5( N03) 3: An oily liquid; Sp. Gr. approximately 1.6. USE: Essential ingredient in all Du Pont dynamites; sold to drug trade in alcohol solution or with French chalk or sugar of milk to be used for medicinal purposes. Explo.-E.P.S. Red Cross Extra Dynamite: High density, general purpose ammonia dynamites of 20-60% strengths. USE: For quarrying, stripping, agricultural and general construction work. Explo.-E.P.S. Red Cross F.R. Dynamites: Four grades of dynamite (based upon strengths) with free-running characteris tics (F.R.). Designed for use in sprung holes and adapted for replacing black powder in quarrying and in blasting soft rock. CONTAINERS: 50-lb. cases con taining four 12'/2 -lb. bags. Explo.-E.P.S. Seismex Dynamite: An ammonia dynamite for seismic prospecting. Low cost but not recommended for water depths over200 feet, with immediate shooting, or for any type of "sleeper" work if water is present. Offered in plain or Fast-Coupler cartridges. Explo.-E.P.S. Seismex PW Dynamite: An ammonia dynamite for seismic prospecting in shallow-hole patterns. Very low cost but has water resistance sufficient only for work that is loaded and shot on the same day. Offered in plain or Fast-Coupler cartridges. Explo.-E.P.S. Seismogel Gelatin: A straight gelatin dynamite de signed and packaged for use in seismic prospecting when water conditions are only moderately severe. Offered in plain or Fast-Coupler cartridges. The latter provide a convenient means for assembling a rigid column of explosive. Explo.-E.P.S. Special Gelatin Dynamite (Ammonia Gelatin): A plastic, highly water resistant (not as good as Straight Gelatin), dense explosive furnished in grades from 25-90% strengths. USE: In mining hard rock, tunnel ing, quarrying, construction work, shaft sinking (if not too wet). Explo.-E.P.S. Straight Dynamite: Produces quick shattering action; is very sensitive to impacts; 20-60% nitroglycerin. USE: In ditching by the propagation method, sub marine blasting. Explo.-E.P.S. Stripkolex Dynamite: A dynamite designed especially for shooting the coal in stripping operations. Explo.-E.P.S. Toval Dynamite: The densest, most economical gelatin dynamite available for hard shooting in con struction and quarry work, particularly where small diameter track type drills are used. CONTAINERS: Package, thin polyethylene tubes (3 in. and above), thin-wrapped paper shells (below 3 in.) and con ventional cartridges in aii diameters. Expio.-E.P.S. Permissible Explosives Explosives which have been tested by U. S. Bureau of Mines and passed as safe for blasting in gaseous and dusty mines if used in accordance with certain speci fied conditions. Doubel Explosives: High velocity permissibles furnished in five grades based upon velocity and cartridge count. USE: For mining coal where lump coal is not a factor. Explo.-E.P.S. GelobelTM Explosives: Gelatin and semi gelatin type permissibles; high density and high water resistance. USE: For coal mining where high strength, high veloc ity, concentration of charge and water resistance are desired. Explo.-E.P.S. Lump Coal C Explosives: A product with a very low velocity of detonation. USE: For coal miring where maximum production of large size coal is desired. Explo.-E.P.S. Lump Coal CC Explosives: A low velocity permis- sible similar to Lump Coal C except that due to slight change in the ingredients it can be manufactured in smaller diameter cartridges, USE: For coal mining where maximum production of large size coal is desired. Explo.-E.P.S. Monobel Explosives: Low velocity permissibles; furnished in six grades based upon velocity and cartridge count. USE: For mining coal, especially where lump is desired. Explo.-E.P.S. EXPRESS BUCKSHOT LOADS, CARTRIDGES, SHELLS: S ee Ammunition, page 11. EXTRA DYNAMITE: See Explosives, Dynamites, Red Cross, page 63 and Extra, page 62. EXTRUSION POWDERS: See Plastics, page 125. F F- J 1 , F-12, F- 13, etc.: See freon Products, page 85. F SALT TECHNICAL: 2-Naphthol-7-sulfonic acid, sodium salt. Paste form; a Chemical Intermediate. Orchem D. & C. FABRIC ANTISTATS: See Av/fex, page 21; Zelec, page 164. 63 DUP210011208 FABRIC-FERTILIZERS FABRIC CLEANERS: See Alkanol*, page 6; DuponoI, page 52; Merpol, page 101. FABRIC CONDITIONER: See Zelcon, page 764. FERRIC DIMETHYLDITHIOCARBAMATE (FERBAM): See Fungicides, Fermafe, page 89. FABRIC FLUORIDI1ER: See Zepel, page 164; FABRIC SOFTENERS: See Avitex, page 21; Aviione, page 21; Zelcon, page 164. FABRIC STABILIZER: See Zeset, page 165. FABRIC WATER REPELLENT: See Aridex, page 16; Natan, page 105; Quilon, page 132; Zelan, page 164; Zepel, page 164. FABRICS, COATED: See Coated Fabrics, page 42. FABRIKOID PYROXYLIN COATED FABRICS: See Coated Fabrics, page 42. FABRIUTE UNSUPPORTED VINYL MATERIAL: See Coated Fabrics, page 43. FABRIUTE VINYL COATED FABRICS: See Coated Fabrics, page 43. FAIRPRENE COATED FABRICS: See Coated Fabrics, page 42. FAIRPRENE INDUSTRIAL CEMENTS: See Cements, page 26. FAIRPRENE P.A.W. TAPE: See Coated Fabrics, page 42. FAIRPRENE SHEET STOCK: See Coated Fabrics, page 42. FAST FLUSH: See Automotive Specialities 7 Products, page 19. FATTY ALCOHOL ETHOXYLATES: See Alkanol, page 6. FATTY ALCOHOL PHOSPHATES: See Ze/ec, page 164. FATTY ALCOHOL SULFATES: See Duponol, page 52. FATTY ALCOHOLS: See Lorol, page 99; Ocenol, page 109. FEED COMPOUNDS: See Nutrition and Therapy Products, page 108. FELT: See Coated Fabrics, Armalon, page 43. FENURON: See Weed and Brush Killers, Dybar, page 162. FERBAM: See Fungicides, Fermate, page 89. FERMATE FERBAM FUNGICIDE: See Fungicides, page 89. Anhydrous Ammonia (Commercial Grade)-NH3: Liquified gas, shipped and stored under pressure; contains 82% nitrogen. USE: As a direct application nitrogen fertilizer; as nitrogen source in manufacture of mixed fertilizers. CONTAINERS: Tank cars. Ind. & Bio.-Bio. Krenite 10 Fertilizer Solution; Solution of urea and ammonium nitrate in aqueous ammonia; contains 43.5% nitrogen. USE: In manufacture of mixed ferti lizers. CONTAINERS; Tank cars. ' Ind. & Bio.-Bio. Nugreen Urea Fertilizer: Tiny round green pellets, much like buckshot in size and shape, specially treated to maintain free-flowing, non-caking characteristics; contains 45% nitrogen. USE: As a nitrogen fertilizer for either direct application or as an ingredient in mixed fertilizers; can be applied to the soil in solid form, or to plant foliage as a water spray. CON TAINERS: 80-lb. paper bags and bulk carloads. Ind. & Bio.-Bio. Nugreen L-B Urea Fertilizer; Light tan granular solid specially treated to maintain relatively free- flowing, non-caking characteristics; contains 45% nitrogen, less than 0.2% biuret. USE: As a low-biuret nitrogen fertilizer for spray application to citrus crops. CONTAINERS: 80-lb. paper bags. Ind. & Bio.-Bio. Uramite Ureaform Fertilizer: Odorless yellow granular solid containing 38% nitrogen derived from urea-formaldehyde; remains free-flowing under all conditions; only slightly soluble in water. USE: As a direct application fertilizer for turf grasses and orna mental plants, or other crops requiring a long period of a continuous and uniform supply of nitrogen. CON TAINERS: 50-lb. paper bags. Ind. & Bio.-Bio. Uramite M Ureaform Fertilizer: Gray-brown gran ular solid containing 38% nitrogen derived from urea- formaldehyde; remains free-flowing under all con ditions; only slightly soluble in water. USE: As a high- quality, long-feeding nitrogen source in specialty mixed fertilizers- CONTAINERS: 100-lb. paper bags and bulk carloads. ind. & Bio.-Bio. Uramon Ammonia Liquors: Solutions of urea in aqueous ammonia. NITROGEN CONTENT UAL-K UAL-37 UAL-S 40.5% 37.0% 43.5% DUP210011209 FERTILIZERS-FILM FERTILIZERS (Conf.) UAL-37 also supplies water-insoluble organic nitrogen. UAL-S also contains amonium sulfate. USE: In manu facture of mixed fertilizers. CONTAINERS: Tank cars. Ind. & Bio.-Bio. Urea Nitrogen Fertilizer-46% N: Tiny round pellets much like buckshot in size and shape, uncoated, con tains 46% nitrogen. Also available in crystalline fcrm. USE: As a nitrogen material where presence of a coating agent might be undesirable, such as in the manufacture of certain liquid fertilizers. CONTAINERS: 100-lb. paper bags and bulk carloads. Ind. & Bio.-Bio. Valron Ureaform Solution: Solution of urea and formaldehyde in water. USE: For manufacture of ferti lizers containing ureaform nitrogen. CONTAINERS: Tank cars and tank trucks. Ind. & Bio.-Bio. FIBER ANTISTATIC AGENTS: See Alkanol, page 6; Avitex, page 21; Ze/ec, page 164. FIBER LUBRICANTS: See Avitex, page 21; Avitone, page 21; Duponol*, page 52; Zelecpage 164. FIBERS, SYNTHETICS: Acele Acetate Fiber: Textile fibers in the form of continuous filament yarns available in natural and color-sealed, normal tenacity continuous filament yarns in various deniers and lusters. USE: All branches of the textile industry. Packaged on tubes and cones in cases and beams. Tex. Fibers Antron Nylon: Textile fibers in the form of con tinuous filament yarns and staple. USE: All branches of the apparel and home furnishings industries. Avail able in normal tenacity in various deniers and lusters. Continuous filament packaged on bobbins and tubes in cases and beams. Staple and tow packaged in bales and cartons. Tex. Fibers Dacron Polyester Fiber: Textile fibers in the form of normal and high tenacity continuous filament yarns, staple and tow. USE: All branches of the textile in dustry. Available in high tenacity and normal tenacity continuous filament textile yarns in various deniers and lusters; high tenacity bright continuous filament industrial yarns, staple and tow, in various deniers, and fiberfill. Continuous filament packaged on tubes in cases and on beams. Staple and tow packaged in bales and cartons. Fiberfill packaged in bales. Tex. Fibers Lycra Spandex Fiber: Textile fibers in the form of continuous monofilaments. USE: Elastic fabrics in the fields of foundation garments, swimwear, surgical hosiery and stretch fabrics for outerwear and lingerie. Packaged on tubes and beams. Tex. Fibers Nylon Fiber (66 Nylon): Textile fibers in the form of continuous filament, producer textured filament yarns, staple and tow. USE: All branches of the textile in dustry. Available in high tenacity and normal tenacity continuous multifiiament yarns and monofilaments and staple and tow in various deniers and lusters. Con- tinous filament packaged on bobbins and tubes in cases and beams. Staple and tow packaged in bales and cartons. Tex. Fibers Orion Acrylic Fiber: Textile fibers in the form of tow and staple. USE: All branches of the textile in dustry. Available in natural and color-sealed black normal tenacity staple and tow in various deniers and lusters. Staple and tow packaged in bales and cartons. Tex. Fibers Orion Bi-Component Acrylic Fiber: Textile fibers in the form of staple and tow. USE: All branches of the textle industry. Available in natural color normal tenacity staple and tow in various deniers, and in semidull luster. Packaged in bales and cartons. Tex. Fibers Teflon TFE and FEP Fluorocarbon Fibers: TFE available in textile fibers as multifilament yarns, sizes 200 to 26400 denier, bleached white or natural. Staple, tow or flock available in 6.67 denier. Can be processed on standard textile equipment. Used for bearings, pump packings and felts. FEP is available as monofilament, sizes 3-60 mil, used for filtration screening and mist separators. The TFE fiber is com bined with Delrin in molding compositions for use in unlubricated bearings. Continuous filament packaged on tubes and cones. Staple and tow packaged in cartons. Tex. Fibers FIBERS, TEXTILE: See Fibers, Synthetic, directly above. FIBROUS POTASSIUM TITANATE: See Tipersul, page 153. FIELDMASTER RIFLE: See Arms, page 17. FILAMENT YARNS: See Fibers, Synthetic, directly above. FILAMENTS, NYLON: See Plastics, Stren and Tynex, page 127 and 128 and Herox, page 126. FILLERS, WOOD: See Finishes, Industrial, page 74; Finishes, Trade Sales (Consumer Products), page 83. FILM, ACETATE: A highly transparent film with good dimensional stability, produced from cellulose acetate. It is resistant to grease and oil. Kin d s : Rigid (CA-143) and flexible (CA-148). THICKNESSES: From 0.00088 0.0020 in., with yields of 25,000-11,000 sq. in. per lb. 65 DUP210011210 FILM USE: Principally for laminations, foliation, document preservation, pressure sensitive tape, magnetic sound recording tape, window cartons and envelopes, pack aging of items, such as textiles, paper specialties. Av a il a b l e FORMS: Supplied by Du Pont in rolls and cut-to- size sheets. Rolls are slit to order in 1/16-in. multiples; standard widths from 1 A -48 in. Cut-to-size sheets are prepared according to specifications in dimensions up to 40 x 48 in. Supplied in forms other than unprinted rolls and cut-to-size sheets by converters and fabricators, names of whom will be supplied upon request. Film FILM, AGRICULTURAL: See Film, Polyethylene, page 67. FILM, CAMERA NEGATIVE: See Photographic Products, page 119. FILM, CELLOPFIANE: See Cellophane, page 25. FILM, CLYSAR: Clysar 100 EH-30 is a balanced, biaxially oriented, heat shrinkable polyethylene film. This film is a light weight, tough, flexible material that provides excellent resistance to the transmission of moisture vapor. The film remains pliable to --70F., resists cracking and is chemically inert and imprevious to acids, alkalies, most solvents, mildew and fungus. It is odorless and non toxic. THICKNESS: Film is available in 0.001 in. with a yield of 30,000 sq. in./lb. AVAILABLE FORMS: Pack aging: High clarity film in 1-mil thickness. Widths from 1 Vi to 72 in. Film, treated for ink adhesion, is avail able as 100 EH-10. USE: Packaging: For multi-packag ing, bundling, fresh produce, frankfurter and miscel laneous overwrap applications. The film has a uni form shrinkage of from 25-30% in both directions at 100C. Clysar 125 PC-10 Polyolefin film is a polypropylene bag film. It is balanced, biaxially oriented and stabil ized against shrinkage due to heat. The dimensional stability of the film is excellent because it is not affected by changes in temperature and humidity. The film is polymer coated on both sides to give sealability and barrier properties. THICKNESS: Film is available in 0.00125 in. with a yield of 22,000 sq. in./lb. Av a il abl e FORMS: Packaging: 1 Va -mil film on 3-in. diameter cores in widths of 1 Vi to 70 in. USES: Packaging: Con sumer goods in bags for crackers and biscuits, snacks, candy and nuts. Film FILM CONSTRUCTION: See Film, Polyethylene and Film, Tedlar Polyvinyl Fluoride, page 67. FILM, DOSIMETER: See Radiographic Products, page 133. FILM, FEP-FLUOROCARBON: See Film, Teflon FEPFluorocarbon, page 67. FILM, GRAPHIC ARTS: See Photographic Products, page 116. FILM, INDUSTRIAL: See Film, Mylar Polyester, directly below; Film, Polyethylene and Film, Tedlar Polyvinyl Fluoride, page 67. FILM, MOTION PICTURE: See Photographic Products, page 119. FILM, MYLAR--POLYESTER: An exceptionally strong, durable film with an unusual balance of properties suited to many electrical, industrial and packaging uses. It has a high level of physical properties, is relatively moisture insensitive, is water vapor resistant and is unaffected by and does not transmit oils, greases and volatile aromatics. It has excellent electrical properties and is compatible with most varnishes and enamels, giving it broad utility in electrical applications. It retains these properties and is useful from -- 80"F. to over 300F. ( with the exact temperature condition depending upon the application. The addition of a polymer coating provides an excellent moisture and gas barrier. KINDS: Seven available types include general purpose film suit able for electrical and other industrial applications, a special electrical grade film in thin gauges for capacitor applications, a transparent film in heavy gauges, a tensilized film for magnetic tape applications, a weatherable film for outdoor applications, heat sealing and heat shrinkable films for packaging. THICKNESSES: From 0.00015-0.014 in. with yields from 133,000-1,430 sq. in. per lb. USES.- Mylar is suited to a wide range of applications: Electrical: Dielectric in capacitors; slot liners,- wedges and phase insulation for motors; tape insulation for motor and generator field coils; a barrier and insulating tape in wire and cable constructions; insulation between turns in transformer coils; backing for mica and other materials for insulation purposes. Other Industrial Uses: Base for magnetic recording tape and pressure sensitive tapes; base for metallic yarns; base for metalizing, decorative laminations; surfacing material for acoustical tile; separator sheet for reinforced plastics; base for engineering reproduction and graphic art materials; roll leaf base; decals; water vapor barriers; apparel and garment stays; various stationery uses such as book covers, page protectors, display folders, index cards and a base for typewriter ribbons. Type W for outdoor uses: Weatherable form provides a unique outdoor construction and glazing material. Packaging: General packaging and wrapping, window boxes, bags, heat shrinkable skin-tight packages for smoked meats and poultry, base for extrusion coatings and laminations for use in gas and vacuum and heat processable pack aging. AVAILABLE FORMS: Supplied in rolls and cut-to-size sheets. Rolls are standardly available on 3-in. I.D. and 6-in. i.D, coresand on Vs -in. I.D, cores for gauges 2 mils and be low. Rolls are slit in 1/16-in. increments from Vi in. to 66 DUP210011211 FiLM 60 in. Wider widths available on request for certain gauges and types. Cut-to-size sheets are prepared ac cording to specifications in dimensions up to approxi mately 43 x 43 in. Film FILM, PACKAGING: See Cellophane, page 25; Film, Acetate, page 65; Mylar Polyester, page 66, and Polyethylene, directly below,- Vexar Plastic Netting, page 161. FILM, PHOTOGRAPHIC: See Photographic Products, page 116. FILM, POLYESTER: See Film, Mylar -Polyester, page 66. FILM, POLYETHYLENE: A very lightweight, tough, flexible material that provides excellent resistance to the transmission of moisture vapor. The film remains pliable to -- 70F., resists cracking, and is chemically inert and impervious to acids, alkali, most solvents, mildew and fungus. It is odorless and nontoxic. THICKNESS: Films in thicknesses from 0.001-0.010 in. with yield from 30,000 3,000 sq. in. per lb. Greater thicknesses available on special quotation basis. Av ail abl e FORMS: Construction and Agriculture: One to 10-mil sheeting in natural and black. Widths from 1 through 40 ft. Also SR-310 Sun light Resistant Polyethylene Film for greenhouses. Industrial: Flat sheeting in natural, available in thick nesses from 100 through 1000 gauge (100 = 0.001 in.). Widths from 1 V2 through 76 in. Black available in utility grade only. Packaging: High clarity, sparkling films in thicknesses 100 through 400 gauge (100 = 0.001 in.). Widths from 1 16 through 72 in. USES: In Construction and Agriculture: Moisture and wind barrier, flashing, temporary glazing, mulching, silage preservation, fumigation, greenhouses, irrigation, tarpaulin, pond lining, frost protection. Industrial: Laminations, fabric replacement, pressure sensitive tapes, wire and cable filler, raw rubber wrap, hot melt ad hesive. Packaging: Consumer goods in bags and over wrap packages for textiles, produce, dried vegetables, paper products, baked goods, toys and other fabricated articles. Av a il a b l e Fo r ms : Supplied in rolls wound on 3-in. I.D. cores. Construction and agriculture types put up in lengths ranging from 100-5,700 ft., depending upon thickness and width. Sold on square footable basis in widths to 40 ft. Industrial and packaging types put up in 1014-, 14-, 17-, and 1914-in. O.D. rolls. Sold by the pound in widths up to 76 in. Rolls slit to widths at 1/16-in. multiples. Film FILM, POLYVINYL FLUORIDE: See Film, Tedlar Poly vinyl Fluoride, directly below. FILM, REPRODUCTION ENGINEERING: See Photo graphic Products, page 116. FILM, SCREEN PROCESS: See Photographic Products, page 118. FILM, SHEET: See Photographic Products, page 123. FILM, SPECIAL: See Photographic Products, page 123. FILM, TEDLAR POLYVINYL FLUORIDE: A tough, inert film with outstanding weather resistance useful in architectural, decorative and industrial applications. The film in unaffected by a wide variety of chemicals, solvents or common stain agents. It is insensitive to moisture and has excellent hydrolytic resistance. Unique electrical properties include high dielectric constant and high dielectric strength. The film remains flexible at -- 98F. and has good aging properties. KINDS: Tedlar is available in clear or pigmented forms in several tensile types ranging from a high tensile, high flex variety to a high elongation, high tear strength type. Pigmented film for architectural applications is available with different gloss levels. Film is supplied with an adherable surface which is compatible with many classes of adhesives or with a heat sealable, antistick surface. THICKNESSES: From 0.0005-0.004 in. with yields from 280-32 sq. ft. per lb. USES: Applications for Tedlar include: Architec tural: Weatherable, colorfast, abrasion-resistant finish for metals, boards, felts, foils, papers and plastics for use in architectural siding, roofing or barrier applica tions. Stain-resistant finish for interior decorative uses. Other Industrial Uses: Base for pressure sensitive coatings; release sheet for reinforced plastics,- base for decals and weatherable signs; a barrier and insulat ing tape in wire and cable. AVAILABLE FORMS: Supplied in rolls slit in 1/16-in. multiples from V2 in. to approximately 72 in. Film. FILM, TEFLON FEP-FLUOROCARBON: Impermeable, transparent, heat sealable film and tubing made from Teflon FEP-Fluorocarbon resin. The film provides the superior properties of a true fluorocarbon plus many new choices of product form and application method. It is inert to virtually all solvents and chemicals. It is non flammable and suitable for continuous use from -- 425F. to 400F. and in low pressure steam. Dielectric constant and loss factor are very low. Dielectric strength is high and the film is free of voids or pinholes over large areas. It is unaffected by outdoor exposure and its surface does not wet or adhere to sticky substances. KINDS: General purpose films and films with cementable surfaces on one or both sides are available. Special films have been developed for uses requiring high flex life under environ mental extremes. Thin wall tubing and heat shrinkable tubing are under development. Other modifications such as special gauges, type or colors will be considered on request. THICKNESSES: From 0.0005-0.090 in. in film form. USES: Rigid and flexible printed circuits, flat electrical cable, transformers and coils, motors, high temperature diaphragms, seals, fuel cells, mold liners, curing wraps. 67 DUP210011212 w FILM-FINISHES pressure sensitive tape, packaging, roll covers. AVAILABLE FORMS: Supplied in rolls. Cut-to-size sheets are available on request. Rolls are standard on 3-in. l.D. cores, 9% -in. O.D. cut to width from V2 in. to 48 in. in 1/16-in. incre ments. Gauges above 0.020 are standard on 6-in. l.D. cores. Tubing is in cut lengths. Gauges 0.0005, 0.001 and 0.002 are available on 1 Vs -in. l.D. cores, 6-in. O.D. from Vi in. to 15 in. wide. Film FILM, X-RAY: See Radiographic Products, page 132. For cementing gaskets in place on automotive motors to increase production efficiency. CON TAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Special Cements: A wide range of adhesives for bonding various substances by modifying applica tions and curing methods. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) CLEARS: FILTER FABRICS: See Coated Fabrics, Armalon, page 43. Bronzing Liquid (Lacquer or Aikyd Type): Lac quer type is air-dry; aikyd type is air-dry or bake. FILTERS, DIFFRACTION: See Radiographic Products, page 132. FILTERS, PLASTIC: See Photographic Products, USE: Vehicle for aluminum or bronze powders for protection and decoration of certain automobile small parts. CONTAINERS: 1-qt., 1- and 5-gal. pails, 53-gal. drums. F.&F.-Fin.( Auto) page 124. Metal (Allcyd Type): Exterior or interior synthetic FINISHES: Finishes (Paints) are sold by various sections of the Fabrics and Finishes Department, namely Automotive, varnish. USE: Over imitation grain or decals, or over bright chrome plated parts. CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Industrial, Refinish and Trade Sales (including Consumer Products and Industrial Maintenance Products). Below Metal (Lacquer Type): Pyroxylin base clear. USE: is an index of the variety of Finishes as they appear on For interiors over simulated wood grain or decals. 1 the following pages: CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) AUTOMOTIVE Fin is h e s (for Automotive Manufacturers only): ' Metal (Methacrylate Type): Methacrylate base Cements, Clears, Compounds (Rubbing, Polishing clear. USE: Protection of bright chrome plated l and Shielding), Enamels, Lacquers, Primers, Primer parts, exterior exposure; dip or spray application. Surfacers and Putties. PAGES 68 TO 71 CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) INDUSTRIAL: Finishes sold primarily to manufacturers for original Metal (Methacrylate Modified Lacquer Type): application. PAGES 73 TO 76 Mixed pyroxylin-methacrylate base clear. USE: 3 Protective coating for exterior of bright aluminum REFINISH: Finishes sold for refinishing automobiles, furniture, appliances, etc. including lacquers, primers, putties, sealers, thinners. PAGES 71 TO 73 Tr ad e Sal es (Consumer and Industrial Maintenance Products): Finishes sold to the consumer, including aluminum paints, calking compositions, color conditioning paints, enamels, flat wail paints, house paint, panels on buses. CONTAINERS: 1-qt., 1- and 5-ga!. cans, 53-gal. drums. F.&F.-Fin.(Aufo) Metal (Modified Aikyd Type): Synthetic clears. USE: For interiors over simulated grain on car interior metal trim for application by electrostatic spray. CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal, drums. F.&F.-Fin.(Auto) Metal (Phenolic Spar Type): Exterior or interior marine paints, varnishes, etc. Industrial Main tenance paints sold both to the consumer and industry include metal primers and enamels, varnishes. USE: Over simulated wood grain or decals. CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) chemical resistant finishes, sealers, varnishes, etc. PAGES 76 TO 83 Wood (Aikyd Type): Clear synthetic varnish. USE: Wood station wagons. CONTAINERS: 1-qt., 1- and FINISHES, AUTOMOTIVE: 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) CEMENTS: Automotive Gasket: Prepared in heavy varnish or pigmented paste form; applicable by brush. USE: Wood (Lacquer Type): Modified pyroxylin base. USE: Interior wood trim of custom built cars. CONTA1NERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums, F.&F.-Fin.(Auto) DUP210011213 FINISHES FINISHES, AUTOMOTIVE (Cont.) Wood (Phenolic Spar Type): Oil modified, phenolic spar varnish. USE: Wood station wagons. CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Wood Sealer (Alkyd or Phenolic Type): Oil modi fied alkyd or phenolic with or without toxic com ponent which retards fungous growth. USE: Ap- :pnieuiiuy oj-ip. aIV. W_V__<__J_U_i M_x_uall:e__n_____Y__V__U___y_u__n_ uj:u_n___c__n__a_i_u__n__u_|i pieces or truck body parts to seal wood pores and prevent moisture absorption. CONTAINERS: 5-gal. pails and 53-gal. drums. F.&F.-Fin.( Auto) COMPOUNDS: Polishing or Rubbing Compound: A polishing material in paste form, designed for machine application or hand rubbing. USE: For final polish ing of Duco and Lucite lacquers to a smooth surface and for bringing up full gloss. CONTAINERS: 1- and 5-gal. cans. F.&F.-Fin.(Auto) Shielding Compound: A pigmented semipaste, having non-drying vehicle. USE: Masking parts of surface while another color is being applied. Used with Duco finishes only. CONTAINERS: 1- and 5-gal. cans. F.&F.-Fin.( Auto) Dulux Foam Resin: Polyester resin, specific for use with isocyanates to produce flexible poly urethane foams. CONTAINERS: 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) ENAMELS: Chassis Black: An air-dry, black, pigmented enamel, applicable by brush or spray, with an oil, asphalt, pyroxylin or synthetic type base. USE: On automobile chassis for protection and decoration. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums, tank cars and tank trucks. F.&F.-Fin.( Auto) Dulux Enamels: Baking and air-dry, clear and pigmented enamels based on a synthetic type vehicle; applicable by spray--manual, machine or electrostatic. USE: Finishing of steel and wood automobile bodies, sheet metal parts, wheels, etc. CONTAINERS: l-pt,, 1 -qt., 1-and 5-gal. cans, 53-gal. drums and tank trucks. F.&F.-Fin.( Auto) Engenamel: See Finishes, Industrial, page 74. Fender: A black, oil or synthetic resin modified asphaltum type enamel applied by dipping and baking at high temperature. USE: Fender and miscellaneous parts finish applied over a rubber first coat. CONTAINERS: 5-gal. cans, 53-gal. drums, tank cars and tank trucks. F.&F.-Fin.( Auto) Gas Tank: A pigmented, black enamel based on an oil semi-alkyd or full-alkyd type vehicle; ap plicable by spray or flow coating; air-dried or force-dried at temperatures up to 250F. USE: Exterior finish of terne plate automobile gasoline tanks. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums and tank trucks. F.&F.-Fin.( Auto) Motor: Air-dry, pigmented, colored enamels; ap plicable by spray; available in an oil, synthetic or pyroxylin type base. USE: On automobile motors. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Small Parts Dip: Pigmented, black or colored enamels based on semi-alkyd or full-alkyd vehicles to bake 250-350F. USE: Automobile small parts. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) LACQUERS: Dip: Air-dry, pigmented, colored or clear lacquers on a special modified pyroxylin base; applicable by dip. USE: On instrument panels, molding, interior decoration, etc. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Duco Lacquers: Air-dry, pigmented, colored lacquers on a special modified pyroxylin base; ap plicable by spray only. USE: Finishing of steel automobile bodies, sheet metal parts, etc. CON TAINERS: 1-pt., 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Duco Metalli-Chrome Lacquers: Metallic finishes producing unusual color effects of great durability. Applicable by spray only. USE: Finishing of auto mobile bodies and sheet metal parts. CONTAINERS: 1-pt., 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Duco Striping Lacquers: Air-dry, pigmented, colored lacquers; applicable by brush. USE: For striping automobile bodies and wheels and for touch-up work. CONTAINERS: 1-pt., 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Auto) Lucite Acrylic Lacquers: Air-dry, pigmented, colored lacquers on acrylic resin base; applicable by spray only, but possessing much greater dura bility to exposure than Duco lacquers. USE: Finishing of steel automobile bodies and sheet metal parts. CONTAINERS: 1-pt., 1-qt., 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) PRIMERS: Black Dipping Primer (Baking, Pigmented, Oil or Alkyd Type): Unusual stability in large dip tanks. USE: Dipping fenders, hoods and miscel- 69 DUP210011214 FINISHES FINISHES, AUTOMOTIVE (Coni.) laneous small parts. Base coat for Duco or Lucite lacquers or Dulux enamels. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums, tank cars and tank trucks. F.&F.-Fin.( Auto) Flash Primer (One-Bake Type): Baking, pig mented, colored, liquid paints on a synthetic base; applicable by spray. USE: Applied to steel auto mobile bodies and followed immediately by sur- facer or baking enamel without drying period between coats. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) Metal (Oil Type): Air-dry and baking, pigmented, colored, liquid paints with oil base; applicable by spray. USE: On automobile bodies and sheet metal parts to give adhesion between the metal and suc ceeding coats. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) Metal (Pyroxylin Type): Air-dry, pigmented, col ored, liquid paints on a pyroxylin base; applicable by spray. USE: For touch-up work on automobile bodies under lacquer only. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Metal (Synthetic Type): Air-dry and baking, pig mented, colored, liquid paints with synthetic base; applicable by spray or brush. USE: On automobile bodies and sheet metal parts to give adhesion between the metal and succeeding coats. CON TAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) Wood: A special low pigmented type primer; ap plicable by brush or spray. USE: On wood commer cial automobile bodies. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Wood Sealer: Clear or pigmented, synthetic or oil type, air-dry, penetrating sealer with or without toxic ingredient to retard growth of fungi; ap plicable by dip, brush, spray or flow. USE: On wood before other finish to seal pores and prevent failure by moisture absorption. CONTAINERS: 1-and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) PRIMER-SURFACERS: Preparakote Primer-Surfacers: Air-dry or bak ing, highly pigmented, liquid paints on a special synthetic base,- applicable by spray or brush. USE: On steel automobile and commercial car bodies, preparatory to finishing with either Duco or Dulux finishes. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Primer-Surfacers (Baking Type): Highly pig mented, liquid paints of the baking type on an oil or semi-alkyd base; applicable by spray. USE: On steel automobile and commercial car bodies, preparatory to finishing with Duco, Lucite or Duiux finishes. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) Primer-Surfacers (Non-Sanding Type): Medium pigmented, modified alkyd base, for use under Duco or Dulux finishes. Material must be baked. When used under Dulux it can be flashed and the baking accomplished simultaneously with the baking of the topcoat. USE: On steel automobile and commercial car bodies, preparatory to finishing with Duco or Dulux finishes. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.(Auto) Primer-Surfacers (Pyroxylin Type): Highly pig mented, lacquer type primer-surfacers. USE: Spot repairing of car finish under lacquer or synthetic topcoats. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) PUTTIES: Duco Putties: Air-dry, highly pigmented, paste materials; very fast drying; applied by glazing to fill metal imperfections. USE: On automobile bodies preparatory to finishing with Duco, Lucite or Dulux finishes. CONTAINERS: 16 -, 1- and 5-gal. cans. F.&F.-Fin.( Auto) Dulux Paste Filler: Alkyd pastes for filling pores in wood of station wagons, interior wood trim of custom built cars or pinhole pores in glass fiber re inforced polyester panels or parts preparatory to finishing with clear, surfacing material or color. CONTAINERS: 5-gal. cans, 30-gal. drums. F.&F.-Fin.( Auto) Dulux Putties: Air-dry, highly pigmented, paste materials; minimum shrinkage; applied by glazing to fill metal imperfections. USE: Preparatory to finishing with either Duco or Dulux finishes. CON TAINERS: 14 , 1- and 5-gal. cans. F_&F.-Fin.( Auto) Oil Base Putties: Air-dry, highly pigmented, paste materials on oil base; applied by glazing to fill indentations in metal which are too deep for the surfacer to fill. USE: On automobile bodies over primer. CONTAINERS: V2 -, 1- and 5-gal. cans. F.&F.-Fin.( Auto) RETARDERS: Slow evaporating, high boiling Duco or Lucite solvents. USE: Added to Duco or Lucite thinner to improve leveling and/or to prevent blushing in humid weather. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) SEALERS: Automotive bleederseal sealer for bleeding colors. For use over and under both lacquer and syn- DUP210011215 FINISHES, AUTOMOTIVE (Cont.) thetic enamel type finishes to prevent discoloration of the topcoat if underneath color tends to bleed. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Auto) SURFACERS: Air-dry and baking, highly pigmented products on oil, pyroxylin and synthetic types of bases; applicable by spraying over primer to give a satisfactory smooth surface when sanded, prepara tory to Duco or Dulux finishes, or other final finish applications. USE: On automobile bodies and sheet metal parts. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) THINNERS: Clear, liquid solvents. USE: For the reduc tion of primers, surfacers, lacquers and enamels to proper working consistency. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums, tank trucks and tank cars. F.&F.-Fin.( Auto) WAX (PROTECTIVE) COATING: Organic wax for spray application (electrostatic or hand) on auto mobiles. USE: Protects automotive topcoats against iron particles, dust and dirt during transit and storage of automobiles. Suitable over Dulux enamels and Lucite acrylic lacquers. CONTAINERS: 1- and 5-gal. cans, 53-gal. drums. F.&F.-Fin.( Auto) FINISHES, REFINISHING MATERIALS: ALUMINUM DUCO LACQUER: Ready-to-mix, for spray application over recommended undercoats; dries to dull sheen for rubbing and polishing. Pack aged in double compartment cans--aluminum paste in top and vehicle in bottom. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) ALUMINUM DULUX ENAMEL: Ready-to-mix high brilliancy aluminum for spray or brush application and ready mixed smudge resistant aluminum for spray application over recommended undercoats on commercial vehicles and other exterior uses. Readyto-mix packaged in double compartment cans. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) ALUMINUM HAMMERED FINISH: One coat, fast drying, decorative coating with hammered ap pearance, designed for spray application on vending machines, tool boxes and other steel and aluminum surfaces. Wide range of colors can be made by tinting with Dulux mixing and tinting enamels. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) APPLIANCE FINISHES: See Finishes, Refinish, Re frigerator Finishes, poge 73. ALUMINUM PAINT: Ready mixed; varnish type products; chrome aluminum and aluminum for interior and tops of truck bodies, motors of passenger cars 71 FINISHES and commercial vehicles, tractors, farm equipment, road machinery, etc. Spray or brush. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.{ Refinish) CHASSIS BLACKS: Varnish type products, gloss and flat; gasoline and non-gasoline proof for refinishing chassis. CONTAINERS: 1- and 5-gal. cans, 16- and 55-gal. drums. F.&F.-Fin.( Refinish) CLEAR GLOSS LACQUER: A nitrocellulose type clear for garnish moldings, instrument panels and other parts of the interior ot automobiles; also mixed with aluminum or bronze powders for striping. CON TAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) CLEAR LACQUER GLOSS ADDITIVE: A water-white nitrocellulose clear which may be added to Duco lacquer when an unrubbed gloss finish is required, as in two-toning, panel repair of original synthetic enamel finishes, etc. It is also used successfully by industrial type accounts requiring a fast drying high gloss lacquer finish. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) CLEAR METAL LACQUER: A nitrocellulose type clear for interior use as a protective coating for aluminum, aluminum alloys and other nonferrous metals. CON TAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) CLEAR WOOD PRIMER: A synthetic type primer for priming porous surfaces, such as wood, composi tion panels, etc., before application of Preparakote primer-surfacers. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) DUCO LACQUERS: Metallic and non-metallic lines of lacquer colors, blacks and whites for spray applica tion over recommended undercoats. USE: For finishing or refinishing automobiles. CONTAINERS: 1-pt., 1-qt. and 1-gal. cans. F.StF.-Fin.(Refinish) DUCO MIXING AND TINTING COLORS: Pig mented nitrocellulose lacquer colors for intermixing in conjunction with the Duco Mixing Service. Also for use in tinting Duco colors. USE: For finishing and refinishing automobiles over recommended under coats. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) DULUX CLEAR--EXTERIOR: A synthetic type clear for use on automotive vehicles as a clear coating over or mixed with Dulux enamel colors to increase gloss,- a protective coating over Dulux type decalcomanias, lettering or other decorations; a slow size with large decalcomanias; a protective coating over stained and filled wood surfaces. CONTAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) DUP210011216 FINISHES FINISHES, REFiNISHING MATERIALS (Cont.) DULUX ENAMELS: Metallic and nonmetallic lines of alkyd resin type colors, blacks and whites for spray application and nonmetallic colors, blacks and whites for brushing. USE: To finish or refinish automobiles, trucks and all types of commercial vehicles over recom mended undercoats. CONTAINERS: 1 -qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) DULUX MIXING AND TINTING ENAMELS: Pig mented synthetic enamel colors for intermixing in con junction with the Dulux Mixing Service. Also for use in tinting Dulux colors. USE: For finishing or refinish ing automobiles, trucks and all types of commercial vehicles over recommended undercoats. CONTAINERS: 1 -qt. and 1-gal. cans. F.&F.-Fin.(Refinish) ENAMEL REDUCERS: Used to reduce the viscosity of Dulux enamels and other alkyd resin products. CONTAINERS: 1-qt. and 1-gal. cans, 5-gal. pails, 16-, 30- and 55-gal. drums. F.&F.-Fin.(Refinish) FISH EYE ELIMINATOR: An additive for Duco and Lucite lacquers and Dulux enamels, designed to eliminate craters in these finishes when applied on surfaces previously waxed or polished with silicone products. CONTAINERS: Boxes of 50 capsules, each of 0.486 g, 2-, 4- and 8-oz. plastic dispensers. F.&F.-Fin.( Refinish) FLATTENING COMPOUND: Additive for Duco Lacquer, Lucite Acrylic Lacquer and Dulux Enamel Colors, to obtain a sheen as low as flat. CONTAINERS: 1 -qt. and 1-gal. cans. F.&F.-Fin.( Refinish) FORCE-DRY AND ANTIWRINKLE AGENT: An additive for use with Dulux air-dry enamel colors to prevent wrinkling when applied in very hot weather or when subjected to force-drying. CONTAINERS: 1-qt., 1-gal. and 5-gal. cans. F.&F.-Fin.( Refinish) FURNITURE FINISHES: Duco sealers and primers, clear lacquers for refinishing wood furniture; interior use only. CONTAINERS: 1-qt., 1- and 5-gal. cans, 16and 55-gal. drums for sealers and lacquers. F.&F.-Fin.( Refinish) LACQUER THINNERS: Used for thinning nitro cellulose and acrylic lacquer type products to spraying consistency. CONTAINERS: 1- and 5-gal. cans; 16-, 30-, and 55-gal. drums. F.&F.-Fin.(Refinish) LUCITE ACRYLIC LACQUER: Metallic and non metallic lines of acrylic lacquer colors, blacks and whites for spot and panel repair and overall re finishing on automobiles factory finished in Lucite, Magic Mirror and other acrylic lacquers. There is a Lucite quality available for spot repair, panel repair and overall refinishing of acrylic and nitrocellulose lacquers, also for panel repair and overall refinishing of baked synthetic enamels. CONTAINERS: 1-pt. and 1 -qt. cans. F.&F.-Fin.( Refinish) LUCITE ACRYLIC LACQUER MIXING AND TINTING COLORS: Pigmented acrylic lacquer colors for intermixing in conjunction with the Lucite Mixing Service. Also for use in tinting Lucite colors. USE: For finishing and refinishing automobiles over recom mended undercoats. CONTAINERS: 1 -qt. and 1-gai. cons. F.Str.-rin.{ Refinish) MASKING COMPOUND: For masking off glass areas and smooth plated metal parts on automobile bodies prior to painting. CONTAINERS: 1 -qt. and 1-gal. cans. F.&F.-Fin.( Refinish) METAL CONDITIONER: An acidic, prefinishing cleaner and conditioner for ferrous metals and aluminum, designed to remove rust and corrosion, etc., and to etch the metals for improved adhesion of finishing systems. CONTAINERS: 1 -qt. and 1-gal. plastic containers. F.&F.-Fin.( Refinish) MOTOR ENAMEL: A gray, varnish type enamel. USE: For refinishing automobile and truck engines. Not suitable for exterior exposure. CONTAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) PAINT REMOVER: A heavy-bodied, water-washable, non-flammable product for removing all types of finishes, including baked enamels, lacquers and varnishes, from automobiles, commercial vehicles, air craft, appliances and other metal surfaces. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) PRIMERS AND PRIMER-SURFACERS: Lacquer Type Primer-Surfacers: Lacquer type undercoats for use in touch-up and in building up repaired metal areas on automobile bodies to a smooth surface prior to application of subsequent finishing coats. CONTAINERS: 1-qt., 1- and 5-gal. cans, 16-gal. drums. F.&F.-Fin.( Refinish) Nonsanding Primer: Quick drying synthetic type primers for use under Dulux enamel or other syn thetic enamel topcoats only. For body steel, aluminum and alloys of aluminum or old finish when no surfacing is required. USE: For finishing auto mobile and truck bodies; applied by spray. CON TAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) Preparakote Primer-Surfacers: Quick drying syn thetic type primer-surfacers for use under Lucite, Duco and Dulux finishes. Fills and can be sanded. USE: For finishing and refinishing auto mobile and commercial vehicles. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) DUP210011217 FINISHES FINISHING, REFINISHING MATERIALS (Cont.) Wash Primer: Fast drying primer for use in pro moting adhesion between hard-to-paint metal surfaces and regular synthetic undercoats. USE: On spangled galvanized iron and other zinc coated metals. May be used on steel and aluminum where exceptional adhesion is a requirement. CONTAINERS: 1- and 5-gal. cans. Activator--1-gal. glass containers. F.&F.-Fin.( Refinish) Zinc Chromate Primer: For use in priming inside of aluminum sheets on truck bodies to prevent corro sion caused by moisture. Also used for pre-priming contacting areas of aluminum with dissimilar metals to prevent rapid corrosion resulting from electrol ysis. CONTAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.( Refinish) PUTTIES: Lacquer type "Spot'n Glaze" and Dulux synthetic glazing and hard putties for filling imper fections on surfaces of automobile and truck bodies. CONTAINERS: 1-lb. tubes, 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) PYRALUX FLUORESCENT ENAMELS, CLEAR AND REDUCER: A lacquer type, high visibility fluorescent enamel for safety and identification mark ing of commercial vehicles, aircraft and other vehicles. Also for sign work and advertising purposes. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) REFRIGERATOR FINISHES: Lucite Acrylic Lacquer, Duco Lacquer and Dulux enamel finishes. For touch-up or overall refmishing of exteriors of re frigerator cabinets, kitchen cabinets, washing ma chines, home, farm and commercial freezers. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) RETARDER THINNER FOR DUCO AND LUCITE LACQUERS: Slow drying thinners to be added to Duco and Lucite lacquer topcoats for blush re sistance and to improve gloss. CONTAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.(Refinish) ROAD MACHINERY AND IMPLEMENT ENAMELS: Pigmented semi-alkyd products. USE: To refinish road machinery, tractors, farm equipment, etc. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) RUBBERTONE RUBBER FINISH: A black finish for renewing appearance of rubber mats, tires, etc. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) RUBBING AND POLISHING COMPOUNDS: For producing gloss on lacquer and enamel finishes. USE: In automobile refinishing. CONTAINERS: 1-qt., 1- and 5-gal. cans. F.&F.-Fin.(Refinish) SEALERS: Automotive Bleederseal Sealer for Bleeding Colors: For use over and under both lacquer and synthetic type finishes to prevent discoloration of the topcoat, if underneath color tends to bleed. CON TAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) Hi-Speed Lacquer Type Automotive Refinish 1 icerJ rAmmmftn Inrnt i systems to prevent sand-scratch swelling. Improves color holdout and gloss. Also suitable for use over original nitrocellulose lacquer and baked enamel finishes when followed by nitrocellulose lacquer topcoats. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.( Refinish) Make Ready Primer Sealers: A sealer for nitro cellulose lacquer and synthetic enamel topcoats used over original lacquer, baked enamel or aged air-dry synthetic enamel finishes on passenger cars. May also be used as a touch-up primer on bare metal "sand through" spots. CONTAINERS: 1-qt. and 1-gal. cans. F.&F.-Fin.(Refinish) SOLVENTS: Gun and Equipment Cleaner.- An effective solvent for cleaning spray guns and other equipment. CON TAINERS: 1-gal. cans, 5-gcl. pails, 16-, 30- and 55-gal. drums. F.&F.-Fin.(Refinish) Lacquer Removing Solvent: For use in partially feather-edging damaged areas on lacquer finished automobiles prior to refinishing; also for quick removal of lacquer finishes down to original factory undercoats. CONTAINERS: 1-qt. and 1-gal. cans, 5-gal. pails. F.&F.-Fin.(Refinish) Prep-Sol Solvent: A safe solvent for cleaning old finishes of Lucite or Ducolacquers and Dulux or synthetic enamels prior to sanding and refinishing with Lucite, Duco or Dulux finishes. CON TAINERS: 1-qt., 1- and 5-gal. pails, 16-, 30- and 55-gal. drums. F.&F.-Fin.(Refinish) FINISHES, INDUSTRIAL: ALUMINUM MIXING VEHICLES: Oil base and syn thetic resin base varnishes to be mixed with aluminum powder or paste for use on wood or metal. Co n t a in e r s : 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) ALUMINUM PAINTS: Oil base and synthetic resin base ready mixed and ready-to-mix aluminum paints for use on exterior and interior wood and metal surfaces. CONTAINERS: 1 - and 5-gal. cans. F.&F.-Fin.(lnd.) 73 DUP210011218 FINISHES FINISHES, INDUSTRIAL (Cont.) ALUMINUM POWDER AND PASTE: Various grades for use in vehicles and bronzing liquids. Co n t a in e r s : 1-, 2- and 10-lb. cans; 50- and 100-lb. drums. F.&F.-Fin.(lnd.) APPLIANCE FINISHES: A complete line of Dulux high bake primers, and Dulux and Lucite high bake enamels for use on metal appliances. CONTAINERS: 5-gai cans, 55-gal. drums and tank trucks (by special arrangement). F.&F.-Fin.(lnd.) BRONZING LIQUIDS: Of various types including pyroxylin base, oil base and synthetic resin base; used as vehicles for the application of aluminum powder, aluminum paste and bronze powder. CONTAINERS: 1-and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) BUDIUM POLYBUTADIENE CAN COATINGS: See Finishes, Industrial, Tin Decorating Finishes, page 76. DRIERS: Compounds used to accelerate the oxidation of a finish which contains drying oils. CONTAINERS: 1-and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) DUCO FURNITURE LACQUER, CLEAR AND FLAT: Used for finishing wood furniture. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) DUCO FURNITURE LACQUER SEALERS: See Finishes, Industrial, Furniture Lacquer Sealers, page 75. DUCO LACQUER ENAMELS: Pyroxylin base enamels furnished in a wide range of colors and types for satisfying the finishing requirements of numerous industries. Applied directly to a surface or over undercoats, depending on the finish needed. CON TAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) DUCO LACQUER METALLI-CHROME ENAMELS: Metallic finishes producing unusual color effects of great durability. Applicable by spray only. USE: Finishing of sheet metal parts. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) DUCO LACQUER PENETRATING PRIMERS: Clear primers used in place of a sealer, particularly in wood furniture finishing, to give a nigh degree of scratch resistance. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) DUCO LACQUER WASH COATS: Used for finish ing wood furniture. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) DU-LITE WOOD BLEACH SYSTEM: A chemical treatment employed to bleach wood to light colors. F.&F.-Fin.(lnd.) DULUX CLEAR EXTERIOR FINISH: Synthetic resin base clears made in various formulations for different types of requirements and characterized by unusual flexibility and durability. Applicable either directly to a surface or as a topcoat over enamels for decora tive and protective values. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) DULUX ENAMEL AND PAINT TYPE PIGMENTED FINISHES: Synthetic resin base enamels and paints furnished in a wide range of colors of various specific types to meet the finishing requirements of numerous industries. Applied directly to a surface or over under coats, depending on the finish needed. Furnished in both air-drying and baking types. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) DULUX WOOD FINISH, CLEAR AND FLAT: Syn thetic resin base clears for furniture finishing. The film must be cured by baking. Applied over a sealer. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) DUXTM ENAMELS: Pigmented, air-dry products recom mended for touch-up and repair of Dulux High Bake appliance enamels and 700-Line Lucite Acrylic finishes. CONTAINERS: All sizes. F.&F.-Fin.(lnd.) ENAMELS: Pigmented finishes available in various colors and in various types, such as pyroxylin base enamels, oil base enamels and synthetic resin base enamels. Available in air-drying and baking types. Applicable either directly to a surface or over under coats, depending on the nature of the finish required. Applied by spraying, brushing, dipping or roller coat ing for protective and decorative purposes. CON TAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) ENGENAMEL: A red enamel (pyroxylin base) used as a sealer coat for crankcases, transmission cases, gear cases, etc., of gasoline motors. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(!nd.) FILLERS: Metal: A heavy paste type of filler used over under coats to smooth out imperfections in the metal. CONTAINERS.- 5-gal. cans and 30-gal. drums. F.&F.-Fin.(lnd.) Dulux Wood Fillers: Available in paste form. Used for filling pores in wood as part of the preparation of surface for subsequent application of varnishes or lacquers. CONTAINERS: 5-gal. cans and 30-gal. drums. F.&F.-Fin.(lnd.) FOIL LACQUERS: Clear and colored lacquers for roller coating application to aluminum foil. The clear may be tinted with alcohol soluble dyes. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) DUP210011219 FINISHES FINISHES, INDUSTRIAL (Cent.) FORMVAR WIRE ENAMELS: See Finishes, Industrial, Wire Enamels, page 76. FURNITURE LACQUER SEALERS: TufcoteTM Furniture Lacquer Sealers: Modified to permit sanding with a special grade of sandpaper particularly suited for use with them. Return ex ceptional results with respect to film properties of toughness, scratch resistance and clarity. CON TAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) IMLAR VINYL OR VINYL ORGANSOL ENAMELS: Pigmented baking products designed primarily for application by roller-coat to metal. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) IMPLEMENT FINISHES: For application by brush, dip or spray to various types of agricultural implements. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) INSULATING VARNISHES: Used to waterproof and improve the dielectric properties of fabric-covered electrical wires and cables. CONTAINERS: 5-gal. cans and 55-gal drums. F.&F.-Fin.(Ind.) LACQUERS: See Finishes, Industrial, Bronzing Liquids, above, Duco Lacquers, above. Metal Lacquers, directly below, and Paper Lacquers, directly below. LECTON ACRYLIC RESIN WIRE ENAMELS: See Finishes, Industrial, Wire Enamels, page 76. LUCITE ACRYLIC FINISHES FOR INDUSTRIAL USE: Air-drying and baking pigmented colored finishes on acrylic resin base possessing much greater durability to exterior exposure than Duco lacquer orDulux. F.&F.-Fin.(lnd.) METAL LACQUERS: Clear pyroxylin base lacquers used as finishes direct to metal, as primers on metal for enamel coats and as topcoats over pyroxylin enamels. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) METHACRYLATE CLEAR FINISHES: Clear solutions of acrylic resin for use over noncorrosive metals. CON TAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.( Ind.) . NFLTM WOOD STAINS: See Finishes, Industrial, Stains, Wood, page 76. NYLON WIRE ENAMEL: See Finishes, Industrial, Wire Enamels, page 76. PAINTS: Pigmented finishes, available in various colors in both oil base and synthetic resin base types; applicable by brush or spray either directly to surfaces or over suitable primers, depending on the nature of the finish required and surfaces to be coated. These products include metal protective paints, prepared paints for wood, flat wall paints and a wide variety of special paints for miscellaneous purposes. Many interior paints are available on an odorless basis. F.&F.-Fin.(lnd.) PAPER LACQUERS: Gloss Lacquers: For use on overprint label stock, parchment, supercalendered clay-coated papers, vulcanized fiber and dense paperboard to obtain a high gloss and scuff resistance. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(Ind.) Grease and Oil Resistant Lacquers: For use on parchment, glassine, kraft and dense papers to provide grease and oil resistance. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) Heat Resistant Lacquers: For use on paper plates or other stock where a degree of heat resistance is needed. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) Heat Sealing Lacquers: For use on glassine, parch ment and dense papers where heat sealing only is required. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) Moistureproof Heat Sealing Lacquers: For use on glassine, parchment and dense papers where both moistureproofness and heat sealing are required. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) Moistureproof Lacquers: For use on glassine, parchment, vulcanized fiber and dense papers where moistureproofness only is required. CON TAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.( Ind.) PRIMERS: Various general types, including pyroxylin base, oil base and synthetic resin base; used as the first or priming coat in a finishing system. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) PUTTIES: Oil base, synthetic resin and pyroxylin base putties, both of the hard type and glazing type. For use in finishing where the surface imperfections are too pronounced to permit obtaining a smooth surface by the use of primer and surfacer coats. CONTAINERS: 1-, 5-, 10- and 22-lb. cans. Pyroxylin base putties also available in 1-lb. tubes. F.&F.-Fin.(lnd.) PYRE-M.L. WIRE ENAMELS: See Finishes, Indus trial, Wire Enamels, page 76. SIGN FINISHES: A complete line of finishes, including undercoats, Dulux sign enamels, Dulux stencil 75 DUP210011220 FINISHES FINISHES, INDUSTRIAL (Cent.) paste and Dulux clear sign finishes. For use on silk screen stencil; press printed, gum printed and litho graphed metal signs. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) STAINS, WOOD (NFLTM): Used under lacquer and varnish to intensify and produce various grain effects on wood. Available in ready-for-use form in a variety of colors. CONTAINERS: 5-gal. cans and 55-gal drums. F.&F.-Fin.(lnd.) STENCIL PASTE: See Finishes, Industrial, Sign Finishes, directly above. STRIPPABLE COATINGS: For various purposes such as coating spray booths, conveyor belts, etc., to catch and remove overspray. Also strippable coatings for temporary protection of idle equipment. F.&F.-Fin.(lnd.) SURFACERS: Various general types, including pyrox ylin base, oil base and synthetic resin base; used as a second or intermediate coat in a finishing system. Co n t a in e r s : 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) SYNTHETIC RESIN COATED FABRICS AND LAMINATES: Lecton Acrylic Resin Coated Fabrics and Laminates: Glass fabrics coated with Lecton acrylic resin and laminates made from these coated fabrics. Offered as an electrical insulating material, these fabrics have excellent thermal stability at class B temperatures (130C.) and can be used for ex tended periods up to 150C. They are essentially unaffected by Freon fluorinated hydrocarbons. F.&F.-Fin.(lnd.) Pyre-M.L. Polyimide Coated Fabrics and Lami nates: These products are class FI electrical in sulating materials. Tests to date indicate that they may be useful for electrical equipment insulation designed to operate continuously at temperatures up to 200C. The electrical properties are un changed at this temperature level. They are also of interest when exposed to nuclear radiation over a wide range of temperatures. F.&F.-Fin.(Ind.) TEFLON TFE AND FEP NON-STICKING FIN ISHES: Special finishes which must be cured by high fusing temperatures. Used for no-stick--no-scour cookware and industrial applications requiring high heat stability, anti-sticking properties and dry lubrica tions. CONTAINERS: 1-pt., 1-qt. and 1-gal bottles, 5-gal. cans. F.&F.-Fin.(Ind.) TEFLON TFE-FLUOROCARBON RESIN WIRE ENAMELS: See Finishes, Industrial, Wire Enamels, directly below. THINNERS: Appropriate combinations of solvents and diluents, used for the purpose of reducing the viscosity or consistency of finishes. Special grades available for various types of pyroxylin base, oil base and synthetic resin base finishes. Certain thinners used for pyroxylin base finishes may also be used to remove pyroxylin films and grease from surfaces which are to be refinished. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Fin.(lnd.) TIN DECORATING FINISHES: Varnishes and enamels, both oil base and synthetic resin base, in cluding Budium polybutadiene finish for application to tin plate, which, after baking, is formed in dies to produce various types of metal containers. CON TAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) UNDERCOATS: See Finishes, Industrial, Primers, page 75 and Surfacers, above. VARNISHES: Clear finishes for application by brush, dip or spray; made from drying oils combined with natural resins or synthetic resins for application to various surfaces for the deposition of films which serve to protect or enhance their appearance. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.( Ind.) WASHING MACHINE FINISHES: A complete line of Dulux high bake primers and Dulux and Lucite high bake enamels for use on metal washing ma chines. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(lnd.) WIPING STAINS: Fast-drying pigment wiping stains for use with wood furniture. CONTAINERS: 5-gal. cans and 55-gal. drums. F.&F.-Fin.(Ind.) WIRE ENAMELS: Pyre-M.L., nylon, Lecton acrylic, Formvar, and Teflon coatings which on baking give enamel-like appearance. Used for application to electrical wire for the purpose of providing insulation. CONTAINERS: 55-gal. drums and tank cars. F.&F.-Fin.(lnd.) FINISHES, CONSUMER PRODUCTS: (TRADE SALES): ALUMINUM PAINTS: Dulux All-Purpose Aluminum Paint--Ready Mixed: A brilliant aluminum finish of unusual 76 DUP210011221 FINISHES FINISHES, CONSUMER PRODUCTS (Cont.) durability for exterior and interior use. USE: Masonry, wood, brick, concrete, cement, metal roofs, structural steel, tanks and galvanized metal surfaces which have been properly primed. F.& F.-Cons.( Trade) Heat Resistant Aluminum Paint -- Ready Mixed: A brilliant aluminum finish. USE: Exterior and interior use on hot surfaces; will withstand con tinuous temperatures up to 400F. exterior; 800F. interior. F.&F.-Cons.(Trade) Hi-Heat Resistant Aluminum Paint: A brilliant, durable, smooth-flowing, ready-to-mix aluminum finish for use on hot metal surfaces. Resin Base: Silicone resin. USE: Stacks, breechings, boiler fronts and other metal surfaces subjected to heat of 400-600F. exterior; 400-900F. interior. F.&F.-Cons.( Trade) CALKING COMPOSITIONS: Imron Polyurethane Calking Composition: De signed for industrial use; black in color. Single package, moisture curing elastomeric calk or sealant for wood, metal, masonry, composition joints or grooves and the interior or exterior of ves sels, equipment and structures. Possesses good re sistance to water, alkalies, chemicals, solvents and corrosive atmospheres. Excellent adhesion and flex ibility over wide temperature range. CONTAINERS: 1-qt. and 1-gal. cans for customer trial and ac ceptance. Note: Not for use in masonry expansion joints or for curtain wall building construction. F.&F.-Cons.( Trade) Polyurethane Calking Composition No. 634: For marine use on a variety of substrates where resilient, fast-curing, high tensile strength specialty sealant is required. Especially adapted as a seam com pound and adhesive suitable for bedding and lap stroke construction. Single package, noncatalyzed elastomeric polyurethane composition,- black in color. CONTAINERS: 1-pt., 1-qt. and 1-gal. cans. F.&F.-Cons.( Trade) CHEMICAL RESISTANT FINISHES: Corrosion resistant finishes are available to protect propertyfrom chemical attack in all phases of industry. When and where such conditions prevail, it is ad visable to have our representative investigate the individual problem and write the painting specifica tions. Such inquiries are welcome and will receive prompt attention. Typical of specialized products in this field are vinyls, phenolics, epoxies and elastomers. Acid and Fume Resistant Paints: Made especially to resist the corrosive action of acid fumes or occasional spillage. Resin Base: Chinawood, phenolic resin. USE: Interior or exterior where the abnormal conditions described exist. F.&F.-Cons.( Trade) Corlar Epoxy Chemical Resistant Finishes: Resin Base: Polyamide catalyzed epoxy resins. USE: Exterior and interior surfaces exposed to chemical fumes and occasional splashes. F. & F.-Cons.{ Trade) Dulux Fume Resistant Yellow: For use in place of Safety Color Code High-Visibility Yellow in chemical plants. Resistant to discoloration from hydrogen sulfide and fading in acid or alkaline atmospheres. F.&F.-Cons.(Trade) Flintflex Lining: An air- or force-dry organic coating system comprised of undercoat and top coats. Exhibits excellent flexibility, smoothness ("slip"), resistance to impact and good general chemical resistance in contact with dry bulk ladings of edibles or chemicals. USE: For application to interiors of railway cars (covered hopper cars, refrigerator and related cars) which haul dry bulk ladings. Adaptable for other uses on interiors of containers, bins, chutes or slides in dry bulk service. Complies with a Food and Drug Administration Regulation. Accepted by the Meat Inspection Division of the U. S. Department of Agriculture for interiors of freight cars, motor trucks and trailers and for application in federally inspected meat processing plants. CONTAINERS: 1- and 5-gal. cans, 55-gal. drums. F.&F.-Cons.(Trade) Imlar Chemical Resistant Finishes: Available in primer, intermediate and various colored topcoats. Resin Base: Vinyl resin. USE: For interior and ex terior use where extreme resistance to abnormal chemical exposure is required. F.& F.-Cons.( Trade) Imron Textile Floor Finish: A single package, oil-free urethane, high gloss clear for wood and concrete floors. Extremely wear resistant. USE: Commercial application for floors subject to heavy traffic in textile mills, paper mills, industrial plants, or wherever a tough and elastic clear coating is required. F.&F.-Cons.(Trade) COLOR CONDITIONING: A proved practical plan for the use of color, devel oped by Du Pont paint technicians working in collab oration with lighting and color specialists. Color Conditioning makes scientific use of color to improve seeing conditions and increase efficiency in industrial plants, stores, hospitals, schools, offices and all types of public buildings. 77 DUP210011222 FINISHES FINISHES, CONSUMER PRODUCTS (Cont.) Color Conditioning eliminates glare, reduces eyestrain and fatigue, and makes color and light work together. Color Conditioning insures the selection of the right color for all interior surfaces. It has been tried and proved under actual operating conditions. Three Dimensional Seeing, a part of Color Con ditioning, embodies the principles of applying focal colors to machine tools to provide maximum visi bility at the critical seeing area and the right color to the body of the machine, resulting in improved production, fewer seconds or rejects, and reduction in accidents. Safety Color Code, a part of Color Conditioning, comprises a uniform system of colors for identifying industrial hazards, thus contributing to industrial safety. F.&F.-Cons.( Trade) Color Conditioning Interior Flat Wall Enamel: A flat wall finish with easy working properties which dries to a fine-textured finish. Odorless formula means no pungent solvent odor during application. Excellent hiding, easy lapping, fast application. Acts as its own sealer over many surfaces. Dries overnight to a matte finish that can be easily washed. Resin Base: Alkyd. USE: Interior walls and ceilings. F.&F.-Cons.{ Trade) Dulux Color Conditioning Interior Gloss Enamel: Especially developed shades in full enamel finish; dries with a hard surface; highly resistant to marring; durable; washable. Odorless-type formula. Resin Base: Alkyd. USE: Especially suited for use on dadoes, trim, cabinets and similar surfaces in homes, factories, schools and institutions where unusual durability is required. F.&F.-Cons.( Trade) Dulux Color Conditioning Interior Semi-Gloss Enamel: A new Dulux semi-gloss finish for walls, ceilings, woodwork, and cabinets in residential and commercial buildings. Easy application, excellent hiding and self-leveling. An extra-hard, durable finish that withstands repeated washing. Odorless- type formula. Resin Base: Alkyd. USE: Interior walls, ceilings and trim. F.&F.-Cons.(Trade) Dulux Color Conditioning Machinery Enamel: A hard-drying enamel for use on machinery and equipment, both indoors and out. Excellent re sistance to chipping, grease and oil. Fast-drying, extremely tough and durable. The colors in this line are those generally used by industry to carry out the principles of Three Dimensional Seeing. Resin Base: Alkyd. USE: Exterior and interior: Metal and wood surfaces; stationary and mobile machinery. plant equipment, pipelines, etc.; farm and road machinery, vehicles, tools. F.&F.-Cons,(Trade) Dulux Color Conditioning Safety Color Code Enamels; These finishes make possible a system of color identification to promote safety. A high gloss durable finish for any type of surface-inside and out. Approved by the National Safety Council and American Standards Association. Resin Base: Alkyd. USE: Exterior and interior: Metal, wood and masonry; farm and road machinery, vehicles, loo's. F.&F.-Cons.(Trade) CUSTOM COLOR SYSTEM: The Custom Color System affords the professional decorator a choice of hundreds of odorless custom colors for interior painting. Universal Tinting Colors are added to Blending Bases to provide matching colors in Flat, Semi-Gloss and Gloss Enamels, Flow Kote Rubber Base Wall Paint and Lucite Wall Paint. Universal Tinting Colors can also be added to 42 Chalk Resistant White House Paint, Dulux Stucco, Shake and Shingle Paint Tinting White, and Dulux Trim and Shutter White to arrive at specific durable exterior colors. With the Custom Color system, the dealer has a choice of two methods of dispensing colorants: (1) Various size tubes of Uni versal Tinting Colors which are hand-squeezed into desired bases; (2) Universal Tinting Colors machine- dispensed through the Du Pont Color Master mixing machine. F.&F.-Cons.( Trade) DUCO FINISHES: Duco Gloss Enamel: Hard drying enamel suitable for exterior exposures. Has good flow, excellent hiding power, high gloss. Dries to handle in a few hours. Made with odorless solvents. USE: Finish ing furniture, indoors and out; interior woodwork and walls, especially in kitchen and bath. F.& F.-Cons.( Trade) Duco Satin Sheen Enamel: Our highest quality semi-gloss enamel; high-hiding, quick-drying, easy- brushing, smooth-flowing; washable, durable. Formulated with odorless solvents. Resin Base: Soya-linseed-alkyd resin. USE: Interior walls, ceil ings, trim and furniture, where a satin-like sheen is desired. F.&F.-Cons.(Trade) Duco Spray Magic Enamel: Duco Enamel in an aerosol can, white and colors. Handy, push-button spray application especially useful for appliances, tools, radiators, furniture, screens and bicycles. Quick-drying; hard, glossy finish. USE: Clean wood or metal surfaces, interior and exterior. F.&F.-Cons.( T rade) DUP210011223 FINISHES FINISHES, CONSUMER PRODUCTS (Coni.) ENAMELS AND UNDERCOATS: Black JackTM Sash and Screen Enamel: A low- cost, high gloss black utility enamel. USE: For interior use on wood and metal surfaces; exterior use on screens and sash. F.&F.-Cons.(Trade) Dulux Bulletin Enamels: Our highest quality enamel for sign painting. Resin Base: Soya-linseedalkyd resin. USE: Exterior and interior signs. F.& F.-Cons.( Trade) Dulux Fume Resistant High Hiding Mainte nance White Gloss Enamel: Similar to Dulux High Hiding Maintenance White Gloss Enamel, but completely lead free for use on walls, ceilings and trim where resistance to discoloration from in dustrial fumes (hydrogen sulfide, sulfur dioxide, etc.) is required. Resin Base: Soya-alkyd resin. F.& F.-Cons.( Trade) Dulux High Hiding Maintenance White Gloss Enamel: Similar to Dulux Maintenance White Gloss Enamel, but with increased hiding to provide one coat coverage over most previously finished interior surfaces. Resin Base: Soya-alkyd resin. USE: Interior ceilings and walls of industrial plants. Not intended for use on trim. F.&F.-Cons.(Trade) Dulux High Hiding Mildew-Resistant Main tenance White Gloss Enamel: Similar to Dulux High Hiding Maintenance White Gloss Enamel, but with unusual resistance to mildew and fungous growths. Resin Base: Soya-alkyd resin. USE: In terior walls and ceilings of industrial plants, factories, institutions, etc. F.&F.-Cons.(Trade) Dulux Maintenance White Gloss Enamel: Has excellent whiteness, retention of whiteness, dura bility and general all-round performance. Resin Base: Soya-alkyd resin. USE: Interior walls and ceilings of industrial plants, factories, institutions, etc. F.&F.-Cons.(Trade) Dulux Maintenance White Enamel Eggshell: A high-hiding, low-eggshell finish, for use only on walls and ceilings of industrial plants, factories, etc. Not intended for use on trim. Resin Base: Soyaalkyd resin. USE: Interior walls and ceilings of industrial plants, factories, institutions, etc. F.&T.-Cons.( Trade) Dulux-Ovalite Enamel Undercoat: Our finest odorless-type undercoat for use with all archi tectural enamels--gloss, semi-gloss, eggshell and flat. Dries quickly. Sands easily; flows out so smoothly that little sanding is required. OvaliteTM may be intermixed with all types of enamels for varying degrees of gloss. May be tinted with Universal Tinting Colors. Resin Base: Alkyd. USE: As an undercoat for general interior use. F.& F.-Cons.( T rade) Dulux Super White Enamel: Available in three sheens--gloss, eggshell and flat. Our finest interior white enamel made with odorless thinner. May be tinted to pastel shades with Universal Tinting Colors. Tough, durable, long wearing. Will withstand repeated washings. Resin Base: Alkyd. USE: In terior trim, walls, cabinets and other wood, Dlaster and primed metal surfaces. F.&F.-Cons.(Trade) Mildew-Resistant Enamel Undercoat: High re sistance to mildew growths. Resin Base: Soya-alkyd resin. USE: As an undercoat for Dulux High Hiding Mildew-Resistant Maintenance White Gloss Enamel. F.&F.-Cons.( Trade) Sanitary Gloss Enamel Oyster White: A high gloss, durable, oyster white enamel. Highly re sistant to mildew growth. Resin Base: Soya-alkyd resin. USE: Interior walls and ceilings of food processing plants under abnormal moisture con ditions and where mildew control is important. F.& F.-Cons.( Trade) Sanitary Gloss Enamel White: A high gloss, durable white enamel. For use under abnormal moisture and damp conditions. Resin Base: Soyaalkyd resin. USE: Interior walls and ceilings. F.& F.-Cons.( Trade) Porch and Floor Enamel: A quick-drying, high gloss finish that will stand hard wear. Especially formulated so as not to show dust and dirt readily. Resin Base: Alkyd. USE: Exterior: Porch floors, wood and concrete steps. Interior: Wood floors, concrete floors that are dry and above grade. F.&F.-Cons.( Trade) TufcoteTM Heavy Duty Enamel: Extremely re sistant to gasoline, oil or grease; quick-drying. One coat is usually sufficient to cover previously painted surfaces. Resin Base: Alkyd. USE: Exterior metal and wood: Tractors, farm machinery, road equipment, wagons, tools, water pumps, wheel barrows. F.&F.-Cons.( Trade) FLAT WALL PAINTS AND SEALERS: Acoustical Ceiling Paint-White: An interior fiat finish of the resin emulsion type. Made in semi paste form, requires reduction with water. Covers most surfaces in one coat and dries so quickly that two coots may be applied the same day. No ob jectionable odor. Resin Base: Resin emulsion. USE: Interior: Walls and ceilings; over wallpaper, plaster, brick, acoustical tile, wallbourd, plywood, painted or unpainted surfaces. F.&F.-Cons.(Trade) 79 DUP210011224 FINISHES FINISHES, CONSUMER PRODUCTS (Cont.) Lucite Wall Paint: A thixotropic acrylic latex flat wall paint especially developed for the "do it yourself" painter. Described as the ''clean, easy, quick way" to paint walls and ceilings. Requires no stirring before use. Due to its creamy-thick con sistency it will not run off brush or roller or drip like regular paint. Produces a beautiful flat finish that can be washed repeatedly. Available in white, ceiling white and a modern selection of ready mixed colors. Also available in hundreds of custom mixed colors. Acts as its own primer. USE: As a flat wall finish for interior walls and ceilings including plaster, wallboard, wallpaper or previously painted surfaces. F.&F.-Cons.( Trade) Primer-Sealer: A combined priming and sealing coat, for use on porous surfaces such as aged plaster, cement, concrete, brick, wallboard, etc. Prevents suction; holds out succeeding coats, creat ing a uniform surface. May be tinted with Universal Tinting Colors where colored topcoats are required. Odorless-type solvents. Resin Base: Alkyd. USE: Prime coat on interior plaster, masonry, wallboard and similar porous surfaces. F.&F.-Cons.(Trade) Sealer-Coater: A priming first-coat for two-coat-a- day painting systems. Dries rapidly to a dull luster. Brushes easily, has excellent hiding and sealing properties. No unpleasant odor. Resin Base: Vinyl emulsion. USE: Prime coat on interior walls and ceilings, either unfinished or previously finished surfaces. F.&F.-Cons.(Trade) Stippling Flat: Primarily intended for application by professional painters. For all forms of stippling and mottling. Made in white only, but may be tinted with Universal Tinting Oil Colors. Resin Base: Soya-linseed-alkyd resin. USE: Interior walls and ceilings. F.&F.-Cons.(Trade) Town and Country Flat White Enamel: Alkyd resin flat made especially for use by the master painter where a full bodied, washable interior flat is desired. Made only in white--may be tinted to any light color with Universal Tinting Colors. Processed with odorless type solvents. Resin Base: Alkyd. USE: Interior walls and ceilings. F.&F.-Cons.( Trade) TufcoteTM #77M Fast Dry Spray Flat White and #77 Semi-Paste Flat White: Quick drying interior flat whites developed specifically for spray applica tion to interior ceilings and walls of large main tenance projects. F.&F.-Cons.( Trade) Wall Color Alkyd Flat Enamel: White only. Odorless-type, alkyd wall enamel, applied easily by brush, roller or spray. Self-sealing quality assures uniform color on new or old surfaces. Dries to a durable low-sheen finish. USE: Interior walls, ceilings and woodwork. F.&F.-Cons.(Trade) FLOW KOTE: Flow Kote Rubber Base Wall Paint: A washable rubber base emulsion wall and ceiling paint. Easy to apply with brush or roller coater. Dries in 30 minutes to a velvet-like sheen. May be recoated in 3-4 hours. Shows no brush marks, laps or streaks. No disagreeable odor. Tough and durable. Unusually wear resistant. USE: Aged bare plaster, wallboard, wallpaper and previously finished surfaces. Acts as its own primer on most old or new surfaces. F.&F.-Cons.(Trade) HOUSE PAINTS: 47 Fume Resistant Outside White: Lead-free in pigment and drier; will not discolor in contact with Hydrogen sulfide fumes found in industrial areas. Similar to 40TM Outside White in other respects. F.& F.-Cons.( Trade) Barn and Roof Paint: A ready-mixed, durable, bright red oxide paint for exterior surfaces. Resin Base: Linseed oil. USE: Exterior use on barns, sheds, fences, etc. F.&F.-Cons.(Trade) Dulux Stucco, Shake and Shingle Paint: A durable protective and decorative coating; seals the pores against moisture penetration; preserves the distinctive texture of original surfaces. The white is self-cleaning after a period of normal exposure; the colors are chalk-resistant. Resin Base: Soyaalkyd resin. USE: Exterior: Brick, cement, concrete, plaster, stucco, cement-asbestos siding. F.& F.-Cons.( Trade) Dulux Trim and Shutter Paint: For all outside trim work. Unusually resistant to mildew and fungous growths. Quick-drying qualities minimize damage from dust and bugs. Resin base: Soyalinseed-alkyd resin. USE: Exterior wood: Shutters, lawn furniture, trim, doors. Exterior primed metal: Roofs, hand rails, fences, lamps, poles. F.&F.-Cons.( Trade) 40TM Outside White: Our highest quolity white oil paint for use on structures which are painted all white. Use as white only; will fade if tinted. The combination of titanium pigments with other pig ments results in a paint that is self-cleaning under normal exposure conditions. Easy brushing. Extra durable. USE: Exterior: Body and trim on houses, barns, outbuildings, fences; also on exterior metal which is properly primed. F.&F.-Cons.(Trade) House Paint Colors: For long life and long lasting good appearance. Easy to apply. Excellent DUP210011225 FINISHES FINISHES, CONSUMER PRODUCTS (Cont.) coverage and hiding. USE: Exterior: Body and trim of wood houses, barns and outbuildings; also on exterior metal trim which is properly primed. F.&F.-Cons( Trade) 42 Chalk-Resistant White House Paint: Designed for (1) tinting with Universal Tinting Colors in producing special shades of house paint; (2) as a white to resist chalk staining of adjacent surfaces. Since it is slow-chalking, it does not have the self cleaning properties of 40TM Outside White. USE: Exterior: Body and trim on houses, barns, out buildings, fences, etc.; also on exterior metal which is properly primed. F.&F.-Cons.(Trade) Lucite Acrylic House Paint--50 Outside White and Colors: Revolutionary new blister-resistant house paint based on acrylic resin emulsion formula. Dries to hard, low-sheen finish. When used with 49 Blister-Resistant Primer over bare wood, provides excellent resistance to moisture blistering, cracking and peeling. Has unusual durability when applied according to directions. USE: New or burned-off wood surfaces, previously painted firm surfaces; properly prepared masonry and metal surfaces. F. & F.-Cons.( Trade) Blister-Resistant Wood Primer--49 Outside White: Penetrating wood primer, especially formu lated for use with Lucite acrylic house paints to provide effective blister- and crack-resistance. USE: Over new or unpainted wood, or over wood from which the old finish has been completely removed. May be tinted. F.&F.-Cons.(Trade) Masonry Block Primer, White: A very heavy semi paste paint designed for interior and exterior use in filling the voids of masonry blocks. Designed for use as a first coater to be followed by con ventional interior or exterior finish coats, or can be used without topcoats to provide a heavy duty finish. Resin Base: Linseed oil. F.& F.-Cons.( T rade) 39 Wood Primer White: Ready mixed primer de signed for use on bare wood and badly weathered painted surfaces before applying house paints. Not to be used as finishing coat. USE: Exterior wood surfaces, body and trim when new or badly weathered. F.&F.-Cons.( Trade) Shingle Stain: Recommended for users who want a high grade, pigmented oil stain for wood houses, patios, fences, etc. Penetrates deeply into the wood to preserve and enhance the original appearance of exterior wood surfaces. F.&F.-Cons.(Trade) 81 MARINE FINISHES: Dulux Marine Finishes: A special line of finishes for the pleasure-boat field; formulated to withstand water and harbor conditions such as salt spray, sun and harbor gases. Quick-drying; excellent dura bility; retain their gloss over long periods. The finishes include Yacht White Gloss, Semi-Gloss and Flat; Yacht Black; many attractive colors of Ship and Deck Finishes; Hard Racing Bottom Paints; Engine and Boot-Topping Enamels; Metal Primer; Paste Wood Fillers. The line also includes Dulux Clear Finish, Dulux Spar Finish, Dulux Clear Wood Primer, Ultra V Spar Varnish and Antifauling Bottom Paints. F.&F.-Cons.(Trade) METAL FINISHES AND PRIMERS: A great variety of primers are available for use in home and industry. While it is not practical to list all of them here, zinc chromates, red leads, primer-surfacers, zinc dust, heat-resistant, etc., are included. Individually formulated for different metals such as mill scale-bearing steel, mill scale-free steel, gal vanized metal, copper, aluminum, stainless steel and others. 789 Antoxide Metal Primer, Black: Resin Base: Alkyd resin, linseed oil primer. USE: Over rusted, hot rolled steel that has been hand cleaned. None of the conventional corrosion inhibiting materials are used. F.&F.-Cons.(Trade) Duco Antirust Finishes: Special group of metal primers and topcoats used to provide highly de pendable protection from rust and corrosion for all metal surfaces--the perfect base for whichever Du Pont finish coat is to be used, interior or ex terior. F.&F.-Cons.( Trade) Duco Aniirust Primer--No. 70 Red Lead: For damp-proof priming of rusted metal. F.&F.-Cons.( Trade) Duco Antirust Primer--No. 546 Zinc Chromate: For clean steel, tin and aluminum. F.&F.-Cons.( Trade) Duco Metal Primer--No. 783 White: For new galvanized and copper surfaces. F.&F.-Cons.( Trade) Duco No. 71 Wrought Iron Black: Dull black finish for all metal surfaces. F.&F.-Cons.(Trade) Duco No. 544 Chrome Finish Aluminum: Bright aluminum finish rivals chromium for bril liance. F.&F.-Cons.( Trade) Dulux Galvanized Metal Primer: Designed especially for use as a prime coat for galvanized DUP210011226 ! FINISHES FINISHES, CONSUMER PRODUCTS (Cont.) metal surfaces. Eliminates need for special treat ment of galvanized metal. Can be used as a finish coat, if desired. Resin Base: Linseed-alkyd resin. USE: Exterior and interior galvanized metal and copper surfaces. F.&F.-Cons.(Trade) Dulux Metal Protective Paints and Metal Primer: Affords maximum protection to metal surfaces. Resin Base: Soya-iinseea-aikyd resin. USE: Interior: Structural steel, tanks, girders and beams, doors, window frames and sash. Exterior-. Roofs, corrugated siding, tanks and supports, structural steel, bridges, doors, window frames and sashes. F.&F.-Cons.(Trade) Dulux Tank Enamel White: An exceedingly white, durable, enamel-type finish. Is self-cleaning under most conditions. Resin Base: Soya-alkyd resin. USE: As a finish for the outside of exterior metal storage tanks to reduce internal temperature. F.& F.-Cons.( Trade) Dulux Thermal Gray: Similar to Dulux Gal vanized Metal Primer but for use on interior and exterior metal surfaces subject to temperature up to 500F. Resin Base: Linseed-alkyd resin. F.&F.-Cons.( Trade) Dulux Zinc Chromate Primer: Highest quality zinc chromate-type primer for ferrous metal. Yel lowish-brown in color. Resin Base: Soya-linseedalkyd resin. USE: For interior and exterior use on properly cleaned metal surfaces. F.& F.-Cons.( T rade) No. 785 Metal Primer: A good quality general purpose red lead and iron oxide-type dark brown metal primer. USE: Exterior and interior metal surfaces. F.&F.-Cons.( Trade) Sub-Marine Metal Primer: A zinc chromate-type primer for use on properly prepared ferrous metal subject to underwater exposure or conditions of extreme moisture. Yellowish-brown in color. Resin Base: Chinawood oil, phenolic resin. USE: Inside or outside on properly cleaned metal surfaces sub ject to continual moisture or dampness. F.& F.-Cons.( Trade) OILS AND THINNERS: Dulux 200 Thinner: A special petroleum distillate for use with Duco enamels and clear finishes, Dulux paints and enamels and with other products as directed on labels. F.&F.-Cons.(Trade) Dulux 711 Odorless Thinner: A new odorless thinner to be used only in those products where its use is specifically recommended on labels. F.& F.-Cons.( Trade) Dulux 710 Reinforcing Oil: A synthetic clear reducing oil. Resin Base.- Soya-alkyd resin. USE: In reducing Dulux exterior finishes in accordance with directions. F.&F.-Cons.(Trade) PROFESSIONAL PAINTER LINE: This line of paints is especially designed for use by professional painters. All products are supplied in white only, except for Professional Latex Wall Paint, which features six colors in addition to white. The white goods may be tinted with Universal Tinting Colors. Each finish in the Professional Painter Line offers fast and easy application, good hiding and excellent appearance. F.&F.-Cons.(Trade) STAINS: Safin Sheen Oil Stain: A pigmented, flat drying stain in a linseed oil, rosin vehicle. Available in all popular shades. USE: For staining all kinds of exterior and interior wood surfaces. F.&F.-Cons.( Trade) Varnish Slain: A high gloss, quick-drying combina tion stain and varnish. Makes possible staining and varnishing in one operation. Highly resistant to marring. Tufcote graining ground is used when changing from a dark to a light surface. Resin Base: Phenolic resin, vegetable oil. USE: Interior: Floors, woodwork and furniture. F.&F.-Cons.( Trade) VARNISHES: Clear Wood Sealer: Versatile, heavy-duty sealer for use under all varnishes for added beauty and durability. Dries fast, allowing sealer and topcoat varnish to be applied same day. Improves ad hesion of varnishes over oil stains. USE: Any in terior wood surface, including floors, paneling, trim and furniture. Not for use under penetrating wood finish. F.&F.-Cons.(Trade) Dulux Exterior Spar Varnish: Pale, high build, tough and elastic. Resin Base: Soya-alkyd resin. USE: Doors, furniture and miscellaneous small surfaces not fully exposed to the weather. Not recommended for siding and trim of houses. F.& F.-Cons.( T rade) Dulux Interior Varnish: High gloss interior varnish. Pale in color; easy brushing, hard drying; excellent resistance to alkali, hot and cold water and alcohol. Quick-drying. Resin Base: Linseed, ester gum, phenolic resin. USE: Floors, trim, bars and furniture. F.&F.-Cons.(Trade) Dulux Satin Sheen Varnish: Highest quality rubbed-effect varnish. Products a uniform low sheen of satin smoothness. Easy to apply. Free- 82 !`l DUP210011227 FINISHES-FLORAL FINISHES, CONSUMER PRODUCTS (Cont.) flowing. Unexcelled for mar and water resistance. Resin Base: Soya-alkyd resin. USE: Interior trim, woodwork, wood paneling and furniture. F.& F.-Cons.( Trade) Penetrating Wood Finish: A clear penetrating finish of great durability. Dries with a dull luster. Resin Base: Chinawood oil, phenolic resin. USE: !r.Tenor *wcoci floors, wood furniture. F.& F.-Cons.( Trade) Super Clear Varnish: A pale, high gloss varnish. Resists discoloration from contact with hot and cold water. Resin Base: Phenolic resin, rosin, tung and soya oils. USE: Interior: Wood floors, woodwork and trim. F.&F.-Cons.{ Trade) MISCELLANEOUS: Paint & Varnish Remover: Nonflammable, water- rinse remover compounded to simplify the job of completely removing all types of finishes from wood, metal, plaster, masonry (and hardened paint brushes) without harming the surface. Heavy bodied formula works equally well on vertical as well as horizontal surfaces. F.&F.-Cons.(Trade) Fasfe Wood Filler: A natural color semipaste wood filler of excellent quality. Requires reduction with turpentine or mineral spirits for use. USE: Filling the grain of interior or exterior open-grained wood surfaces; also recommended for marine work. F.&F.-Cons.(Trade) Soil Retardant Finish Concentrate: A transparent fluid containing colloidal silica. Possesses unique property of making a smooth painted surface so slick that dirt collection is minimized. USE: Commer cial application on painted tanks, signs, buildings, service stations. Also interior surfaces. F.& F.-Cons.( Trade) Traffic Paint: Quick drying finishes for marking traffic lanes. USE: Exterior street surfaces, interior floors of industrial plants for marking aisle bound aries for general traffic control. F.& F.-Cons.( Trade) Universal Tinting Colors: For use with Custom Color white bases and ready-mixed shelf-goods colors and whites, including oil-base and emulsion finishes. Carefully controlled for tinting strength and color. F.&F.-Cons.(Trade) FINISHES, LEATHER: See Alkanol, page 6; Avitone, page 21; Dvponol, page 52; Merpenfine, page 101; MefhacrolTM, page 102. FINISHES, TEXTILE: See Alkanol, page 6; Aridex, page 16; Avitex, page 21; Avitone, page 21; Duponal, page 52; Merpol, page 7 01; MefhacrolTM, page 102; Product BCO, page 130; Ze/an, page 164; Zelcon,page 164; Zepel, page 164; Zelec, page 164; Zesef, page 7 65. FIRE EXTINGUISHING AGENTS : See Freon Products, F-13B1, F-l 14B2, pages 86 to 87. FISCHER'S ALDEHYDE: Sold as 7,3,3-Trimethy!-A2,"- indolineacetaldehyde Technical, a Chemical Inter mediate. Orchem D. & C. FISCHER'S BASE: Sold as l,3,3-Trimethyl-2-methyleneindoline Technical, a Chemical Intermediate. Orchem D. & C. FISH EYE page 72. ELIMINATOR: See Finishes, Refmish, FISHING LINE: See Plastics, Stren Monofilament Fish ing Line, page 127. 552TM ACCELERATOR: See Accelerators for Natural and Synthetic Rubber, page 7. FLAME RESISTANT VINYL DRAPERY MATERIAL: See Coated Fabrics, Tontine Drapery Material, page 43. FLAME RETARDANT PLASTIC: See Plastics, Rulan, page 127. FLAME RETARDANTS: See Ammonium SuHamate, page 7 7; Ammonium Sulfate, page 11; CMTM, page 42; CZC, page 46; X-12, page 164. FLEXIBLE LINEAR SHAPED CHARGE (FLSC): A V-shaped flexible metal tube containing a high explosive core. When detonated, it provides a sharply defined cutting or separating action. Available in core loadings of PETN or RDX, ranging from 5-250 grains/ft.; average detonation velocity is 25,000 ft./second. CONTAINERS: Various lengths on spools or as custom assemblies de signed for specific application. Explo.-C.P.S. FLEXIBLE SHAFT GRINDERS: See Tools, Construction and Industrial, page 155. FLINTFLEX ENAMELS: See Finishes, Trade Sales (Con sumer Products), page 77. FLOOR MAINTENANCE PRODUCTS: See Professional Floor Maintenance Products, page 130. FLOOR PADS, NYLON: See Professional Floor Main tenance Products, page 131. FLOOR WAX REMOVER AND ALL PURPOSE CLEANER: See Professional Floor Maintenance Products, page 131. 83 DUP210011228 FLOW-FLUXES FLOW KOTE RUBBER BASE WALL PAINT: See Finishes, Trade Sales (Consumer Products), page 80. Zaclon CS Galvanizing Flux: Specially formu lated for use as an aqueous preflux in continuous j I! :' FLSC: See Flexible Linear Shaped charge, page 83. strip galvanizing. It protects the steel against oxidation at preheat temperatures. Not recom FLUORESCENT BRIGHTENERS: See Pontamine mended as a kettle flux in normal galvanizing Whites, page 54. operations because of low fluxing activity. CON FLUORESCENT CHEMICALS.- See Luminescent Chemical TAINERS: 100-lb. paper bags. Ind.&Bio.-Ind. ill Products, page 101. Zaclon F Galvanizing Flux: The basic flux used by the galvanizing industry. As an aqueous preflux, FLUORESCENT ENAMELS: See Finishes, Refinish, it insures uniform zinc coating, reduced dross page 73. formation and activation of top flux. As a foaming FLUORINATED HYDROCARBONS OR FLUORO CARBONS: See Freon Products, page 85. FLUOROALKYL ESTERS: See Petroleum Chemicals, Stable Fluids, Zonyl, page 115. top flux, it reduces the quantity of fumes and spatter and prolongs flux life. Used by galvanizers of pipe and conduit, tanks, wire and basket work. CONTAINERS: 100-lb. paper bags and 400-lb. fiber drums. Ind.&Bio.-lnd. FLUOROCARBON COATED FABRICS: See Coated Fabrics, Armalon, page 43. Zaclon F-2 Galvanizing Flux: A small-particle sized, fast-melting, foaming flux recommended as a FLUOROCARBON FIBER: See Fibers, Synthetic, Teflon, page 65. FLUOROCARBON FILM: See Film, Teflon, page 67. top flux and corrective sprinkle for hard-to-galva- nize structural pieces and basket work. Also useful as a dry preflux. CONTAINERS: 100-lb. paper bags and 400-lb. fiber drums. Ind.&Bio.-lnd. FLUOROCARBON FINISHES: See Finishes, Industrial, Zaclon K Galvanizing Flux: Similar to Zaclon F Teflon, page 76. as a preflux, but gives a thin, fluid cover as a top FLUOROCARBON FINISHES, TEXTILE: See Zepel, page 164. flux. Used by galvanizers of fittings processed on automatic continuous equipment, structural shapes and nails. CONTAINERS: 100-lb. paper bags and J. FLUOROCARBON RESINS: See Plastics, Teflon, 400-lb. fiber drums. Ind.&Bio.-lnd. i page 127. Soldering--Eureka Soldering Flux Crystal--Zinc FLUOROCARBON TELOMERS: See Vydax, page 161. Chloride + Ammonium Chloride: White, crystal line powder; soluble in water. USE: As a flux in soft FLUOROCHEMICAL SURFACTANT: See Zonyl S-13, soldering operations and in preparation of liquid page 165. soldering fluxes. CONTAINERS: 50- and 600-lb. steel FLUOROELASTOMERS: See Synthetic Rubber, Viton, page 150. FLUOROSCOPIC SCREENS: See Radiographic Products, page 133. drums. Ind.&Bio.-lnd. Soldering--Kleanrol Soldering Flux Crystal-- Zinc Chloride + Ammonium Chloride: White, cry stalline powder. USE: As a solder blanket flux in auto matic soldering of side-seams in manufacture of tinned FLUXES containers. CONTAINERS: 50- and 500-lb. drums. Ind.&Bio.-lnd. Ceramic: See Ceramic Products, Frits, page 27. Soldering Liquid--Triple Eureka and Eureka Soldering Flux: Clear, colorless water solutions based i Galvanizing--Zaclon: A series of fluxes based on on zinc chloride and containing other ingredients. active zinc ammonium chloride combined with addi Various gravities and compositions. USE: General tives, available in various physical forms. soft soldering, solder and lead-coating fluxes for Zaclon 2N: The newest compounded flux formu lated to give more powerful and longer lasting top flux activity. It normally eliminates the need to add ammonium chloride periodically; such additions use in the automotive, can, refrigeration, wire and other industries. CONTAINERS: 55-gal. drums. Ind.&Bio.-lnd. Tinning--Standard and High Speed Tinning Flux being made to activate and thin the flux, but un 50: Clear, colorless water solution of zinc chloride desirably causing excessive fuming. It is recom and ammonium chloride; Sp. Gr. 1.526; F. P. below mended for many top flux applications, but not for -- 50F. USE: As fluxing solutions in manufacture of preflux use. It is mildly foaming. CONTAINERS: 100-lb. bags. Ind.&Bio.-lnd. tin plate, feme plate, tin strips, dairy equipment, refrigerator trays, automobile radiators, wire goods. DUP210011229 FOAM-FREON3 FLUXES (Cont.) etc. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. FOAM CLEANER: See Automotive Specialties 7 Prod ucts, page J 9. FOAM RESIN: See Finishes, Automotive, Compounds, Dulux Foam Resin, page 69. FOOD PROPELLENT, AEROSOL: See Freon C-318, page 87. FORCE DRY & ANTIWRINKLE AGENT: See Finishes, Refinish, page 72. FORMALDEHYDE SOLUTION (FORMALIN)--CH20: A clear, colorless, aqueous solution. USE: In manufacture of phenolic, melamine, and urea resins; in manufacture of casein plastics, d/es, chemicals for textile industry and embalming fluids; in paper, leather and cork products; as a disinfectant, deodorant, preservative; for chemical synthesis. Low methanol and LM stabilized grades-. 37% formaldehyde by weight, max. 1.5% methanol by weight; 44% and 50% formaldehyde by weight, higher concentrations on special order, max. 2% methanol by weight. CONTAINERS: Tank trucks and tank cars. U.S.P. Grades: 37% formaldehyde by weight, 7-11% methanol by weight. CONTAINERS: 55-gal. drums (11 % only), tank trucks and tank cars. Ind.&Bio.-Ind. FORMALIN: See Formaldehyde Solution, directly above. FORMAMIDE--TECHNICAL--HCONHj: Colorless, vis cous hygroscopic liquid; B. P. 210C.; F. P. 2.5C. USE: Exceptionally good solvent; softener (e.g., in paper, glues); as acid source for controlled gelation of silicate; chemical intermediate. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. FORMANILINE TECHNICAL: N-Methyleneaniline. Powder form; a Chemical Intermediate. Orchem D. & C. FORMATE, METHYL: See Methyl Formate, page 103. FORMIC ACID: See Acids, page 3. FORMVAR WIRE ENAMELS: See Finishes, Industrial, Wire Enamels, page 76. FREON FLUOROCARBON PRODUCTS: Freon fluorocarbon products are readily available for use in refrigeration and air-conditioning equipment as original and replacement charges; for aerosol propellent uses; as blowing agents; as cleaning liquids and solvents,and for miscellaneous uses. Those interested are re quested to contact our Wilmington or nearest district office for full information regarding the products, usage and nearest stocking points. Freon fluorocarbons are clear, water-white liquids. Their vapors have a mild and somewhat ethereal odor; are nonirritating to the eyes, nose, throat, lungs and skin; are very low in toxicity; are nonflammable, non explosive, noncorrosive and essentially stable and inert. Also listed are other fluorinated products, some of which are used as chemical or polymer intermediates. Some are flammable and have varying degrees of chemical activity. Freon-11 or F-l 1 Refrigerant, Propellent, Blow ing Agent and Solvent--Trichlorofluoromethane --CCI3F: B. P. 74.8"F. (23.8C.) at 760 mm. USE: As a refrigerant in industrial and commercial air-condition ing systems; also in industrial process water and brine cooling to --40F. (-- 40C.) employing single or multi stage centrifugal compressors of 100-ton refrigeration capacity and larger. As brine refrigerant in indirect low-temperature systems to -- 150F. (-- 101.1"C.). As solvent for cleaning up a refrigeration unit which has experienced a burnout in the hermetic motor. As blowing agent for rigid and resilient polymeric foams. Solutions of Freon-11 and Freon 12 are used as propellents for a wide variety of aerosol products; can be tailored to individual pressure requirements from 1-70 psig at 70F. (21.1C.). CONTAINERS: 100-, 200- and 650-lb. drums; 2,200-lb. tanks; tank trailers and tank cars. Orchem-Freon Freon-1 1 B or F-l 1 B Blowing Agent--Trichloro fluoromethane Formulation--CCI3F: Freon-11 to which has been added an inhibitor that virtually eliminates stability problems caused by an acid forming reaction between the trichlorofluoromethane and hydroxyl groups of polyol components. (Patent applied for.) USE: As blowing agent for rigid and resilient polymeric foams. CONTAINERS: 100-, 200- and 650-lb. drums; 2,200-lb. tanks,- tank trailers and tank cars. Orchem-Freon Freon-11 S or F-l 1 S Propellent--Trichloro fluoromethane Formulation -- CCl3F: This product is a formulation of Freon-11 containing 0.3 wt. % of nitromethane. (U.S. Patent 3,085,1 16.) The stabilizer serves to inhibit the free-radical reaction of trichloro fluoromethane with ethanol and other alcohols. USE: As a propellent for aerosol hair sprays and other aerosol products containing alcohols. CONTAINERS: 100-, 200- and 650rlb. drums; 2,200-lb. tanks; tank trailers and tank cars. Orchem-Freon Freon-12 or F-l2 Refrigerant, Propellent and Blowing Agent -- DichIorodifluoromethane -- CCI2F2: B. P. --21.6F. ( --29.8C.) at 760 mm -- Pres sure--70 psig at 70F. (21.1C.). USE: As a refrig erant in both direct and indirect industrial, commer- 85 DUP210011230 FREON FREON (Cont.) cial, household and automotive air-conditioning sys tems; also in household refrigerators, ice cream cabi nets, frozen food cabinets, food locker plants, water coolers, etc., employing reciprocating compressors ranging in size from fractional to 800 horsepower. Freon-12 is also used in household refrigerating sys tems, ice cream cabinets and frozen food cabinets em ploying rotary-vane compressors. Freon-12 is used in industrial process water and brine cooling to -- 110F. ( --78.9C.) employing multistage centrifugal compressors in cascade of 100-ton refrigeration capacity and larger. Freon-12 is used as a propellent for high-pressure aerosols such as those containing insecticides. Also for surface-coating products such as metallic and pigmented paints and lacquers. Solu tions of Freon-12 with other Freon products are used as aerosol propellents for a wide variety of prod ucts; also as low-temperature solvents. As a blowing agent for rigid and resilient polymeric foams; avail able in pressureflow cylinders for frothed polymeric and other foams. As a leak-detecting agent. CON TAINERS; 10-, 25-, 50- and 145-lb. cylinders; 2,000-lb. tanks; tank trailers and tank cars. Orchem-Freon Freon-13 or F-13 Refrigerant--Chlorotrifluoro- methane--CCIF3: B. P. - 114.6F. (-81.4C.) at 760 mm. Pressure--459 psig at 70F. (21.1C.). USE: As a refrigerant in both direct and indirect industrial very- low-temperature cascade systems ranging in size from fractional to 100 horsepower, employing reciprocating or rotary compressors; aircraft environmental test chambers; shrink fit, toughening and hardening of metals; pharmaceutical processing. Direct coolant for infrared detector cells. CONTAINERS: 5-, 9-, 23- and 80-lb. cylinders. Orchem-Freon Freon-13Bl or F-13B1 Refrigerant and Freon FE 1301 Fire Extinguishing Agent--Bromotrifluoromethane--CBrF3: B= P. -72.0F. (-57.8C.) at 760 mm. Pressure--199 psig at 70F. (21.1C.). USE: Asa refrigerant in both direct and indirect indus trial low-temperature cascade or multiple compression systems ranging in size from fractional to 100 horse power, employing reciprocating or rotary compressor- aircraft environmental test chambers; shrink fit, tough ening and hardening of metals; pharmaceutical proc essing. As a iow-toxicity fire extinguishing agent which is much more effective than other liquefied-com- pressed-gas-type agents and leaves no harmful residues. CONTAINERS: 6-, 10-, 28- and 150-lb. cylinders and 2,000-lb. tanks. Orchem-Freon Freon-14 or F-14 Propellent and Refrigerant Gas-Tetrafluoromethane-CF4 B. P. -- 198.4F. (--128.0 C.) at 760 mm. Critical temperature -- 50.2F. (-- 45.7C.). Critical pressure-543 psia. USE: As a refrigerant in extremely-low-temperature cascade systems for environmental testing, metal con ditioning, pharmaceutical processing, freezing and storage of biological products and other cryogenic applications. As an inert propellent gas to operate satellite guidance and stabilization rockets. CON TAINERS: 5-, 15-, 50- and 70-lb. cylinders as a com pressed gas. Orchem-Freon Freon-21 or F-21 Refrigerant, Solvent and Pro pellent--Dichlorofluoromethane--CHCI2F: B. P. 48.1F. (8.9C.) at 760 mm. Pressure--8.4 psig at 70F. (21.1C.). USE: As a refrigerant for centrifugal machines. As a solvent where its relatively high kauri-butanol number is desirable. Solutions with Freon-12 are useful in aerosol products requiring special solvent qualities in the propellent. CONTAINERS: 5-, 10-, 25- and 150-lb. cylinders, 2000-lb. tanks and tank trailers. Orchem-Freon Freon-22 or F-22 Refrigerant, Polymer Inter mediate, Propellent and Solvent--Chlorodifluoromethane--CHCIFj : B. P. -41.4C. (-40.8C.) at 760 mm. Pressure--122 psig at 70F. (21.1C.). USE: As a refrigerant in room and central residential air conditioning systems and heat pumps employing re ciprocating or rotary compressors; also in industrial and commercial low-temperature refrigerating systems employing reciprocating and centrifugal compressors. Solutions of Freon-22 with Freon-11 and Freon-12 are used as propellents for aerosol products requiring special solvent and pressure qualities. Chemical inter mediate for polymer manufacture. Used as a low- temperature solvent in investment casting process for preparation of ceramic molds. CONTAINERS: 9-, 22-, 25-, 50- and 125-lb. cylinders; 1,750-lb. tanks; tank trailers and tank cars. Orchem-Freon Freon-23 or F-23 Refrigerant--Trifluoromethane --CHF3: B. P. -- 115.7F. (-82.0C.). Pressure--605 psig at 70F. (21.1C.). USE: As a refrigerant for very- low-temperature applications similar to those de scribed under Freon-13. Direct coolant for infrared detector cells. CONTAINERS: 1-, 5-, 20- and 70-lb. cylinders. Orchem-Freon Freon-113 or F-113 Refrigerant, Propellent, Blowing Agent and Polymer Intermediate--Trichlorotrifluoroethane--CCI2FCCIF2: B. P. 117.6F. (47.6C.) at 760 mm. USE: As a refrigerant in indus trial and commercial air-conditioning systems; also in Industrial process water and brine cooling to 0F. ( -- 17.8C.) employing four or more stage centrif ugal compressors of 25-ton capacity and larger. Freon-113 is used with other Freon compounds as a propellent for aerosol products. As blowing agent for rigid and resilient polymeric foams. As a chemical intermediate for polymer manufacture. CONTAINERS: 100-, 200- and 690-lb. drums; 2,200-lb. tanks; tank trailers and tank cars. Orchem-Freon DUP210011231 FREON FREON (Cent.) Freon-114 or F-114 Refrigerant, Propellent, Blowing Agent and Dielectric Fluid--Dichlorotetrafluoroethane--CCIF2CCIF2: B. P. 38.8 F. (3.8C.) at 760 mm. Pressure--13 psig at 70F. (21.1C.). USE: As a refrigerant in fractional horse power household units and drinking water coolers em ploying rotary compressors; also in industrial and com mercial air-conditioning systems and in industrial proc ess water and brine cooiing to --70F. (--5o.7C.} em ploying multistage centrifugal compressors of 100-ton capacity and larger. As a high-stability heat transfer medium. Solutions of Freon-114 and Freon-12 are used as propellents for aerosol products where active ingredients require extreme stability--cosmetics for example; provide pressures from 13 to 70 psig at 70F. (21.1F.). As blowing agent for rigid and resilient polymeric foams. As a dielectric fluid having extremely high strength--about 130 KV per in. at 760 mm. CONTAINERS: 25- and 150-lb. cylinders; 2,200-lb. tanks; tank trailers and tank cars. Orchem-Freon Freon-114B2 or F-l 14B2 Refrigerant, Fire Ex tinguishing Agent and Control Fluid--Dibromotetrafluornethane--CBrF2CBrF2: B. P. 117.1F. (47.3C.) at 760 mm. Liquid Density--2.18 g/cc at 70F. (21.1 C.). USE: As a refrigerant in industrial and commercial air-conditioning systems employing centrifugal compressors of 25-ton capacity and larger. As an efficient high-boiling liquid fire ex- tinquishing agent. As a thrust vector control fluid. CONTAINERS: 17-, 85-, 250- and 340-lb. drums; tank trailers. Orchem-Freon Freon-115 or F-115 Refrigerant and Dielectric Gas--Chloropentafluoroethane--CCIF2CF3: B. P. -- 37.7F. ( -- 38.7C.) at 760 mm. Pressure--103 psig at 70F. (21.1C.). Dielectric strength--about 90 KV per in. at 760 mm. USE: As a refrigerant having a capacity between those of Freon-12 and Freon-22; can be used with both reciprocating and rotary com pressors and in a wide variety of applications; has a lower discharge-gas temperature than either Freon-12 or Freon-22. As a dielectric and coolant gas where its high dielectric strength and effective heat transfer characteristics result in increased capac ity of the electrical equipment; has good thermal stability. CONTAINERS: 1-, 11-, 23- and 135-lb. cylinders; 1800-lb. tanks. Orchem-Freon Freon-116 or F-l 16 Dielectric Gas--Hexafluoroethane--CF3CF3: B. P. -108.8F. (-78.2C.) at 760 mm. Pressure--440 psig at 70F. (21.1 C.). Dielectric strength--about 70 KV per in. at 760 mm. USE: As a dielectric and coolant gas where its high dielectric strength and effective heat transfer characteristics result in increased capacity of the electrical equipment; suitable for use at both very high and very low temperatures; one of the most stable of all organic compounds. CONTAINERS: 1-, 8-, 18-, 80- and 90-lb. cylinders. Orchem-Freon Freon C-318 Food Propellent and Freon-C318 Dielectric Gas and Refrigerant--Octafluorocyclobutane--Cyclic C4F8: B. P. 21.5F. (--5.8C.) at 760 mm. Pressure--25 psig at 70F. (21.1 C.). Di electric strength--about 110 KV per in. at 760 mm. USE: Food grade: As propeiient for aerosol food products, tasteless and odorless, approved by U. S. Food & Drug Administration. Mixture with nitrous oxide as propellent for whipped cream, dessert topping, salad dressing and other pressurized food products. As propellent for flavoring extracts, spices or other food additives. As propellent for inhalation pharmaceutical products. Technical grade: As a di electric and coolant gas where its high dielectric strength and effective heat transfer characteristics result in increased capcity of the electrical equipment; has extremely good thermal stability--service tem perature at least 250C. Also used as a refrigerant having high stability. CONTAINERS: 1-, 14-, 28- and 165-lb. cylnders; 2,200-lb. tanks. Orchem-Freon Freon5Q2 or F-502 Refrigerant--48.8/51.2 Wt. % CHC1F2/CCIF2CF3: B. P. -- 50.1F (-45.6C.) at 760 mm. Pressure--137 psig at 70F. (21.1C.). This is a patented azeotrope of Freon-22 and Freon-115 refrigerants. USE: As a refrigerant in food display cases, food storage and processing, ice makers, home freezers, low-temperature environmental refrigeration, and heat pumps. Freon-502 is a high-capacity re frigerant with distinctly lower discharge gas tempera tures in reciprocating and rotary compressors. CON TAINERS: 9-, 22- and 125-lb. cylinders; 1,750-lb. tanks. Orchem-Freon FREON CLEANING IIQUIDS AND SOLVENTS: Freon BF Solvent, Freon-112 or F-l 12 Fluoro carbon-- Tetrachlorodifluoroethane-- CCI2FCCI2F: B. P. 199.0 F. (92.8C.) at 760 mm; F. P. 79F. (26C.). USE: As a solvent, and in mix tures with Freon MF and Freon TF to provide spe cific boiling points and properties. As a flash point retarder for hydrocarbons and some higher boiling solvents. CONTAINERS: 5-, 20- and 55-gal. non- returnable drums. Orchem-Freon Freon MF Solvent--Trichlorofluoromethane-- CCI3F: B. P. 74.8F. (23.8C.) at 760 mm., F. P. -- 168F. (-- 111C.). USE: As a cleaner for hermetic motor compressors; vapor degreasing liquid for oxygen and other low-temperature storage and transfer tanks, etc. In blends as a cleaner for motion picture and television film, lithographic plates, typewriters, etc. As a flash point retarder for 87 DUP210011232 i FREON-FUMIGANTS FREON (Cont.) flammable solvents. As a simulation fluid for testing rocket systems and as a hydrostatic test fluid. Also used as an inert, noncorrosive brine and low- temperature heat transfer fluid such as in the cold treatment of brazed stainless steels. CONTAINERS: 5-, 20- and 55-gal. nonreturnable drums; tank trailers and tank cars. Orchem-Freon to about 500; also suitable for cold immersion cleaning, as vapor degreasing solvents and for ultrasonic or combination ultrasonic-vapor-de greasing cleaning; used as cleaners for a variety of mechanical, electrical and electronic com ponents and other products as described under Freon TF Solvent. Freon T-WD 602 Solvent is particularly useful when water-soluble dirt, as well as organic-soluble dirt, must be removed. Freon TF Solvent--Tricniororrmuoroeifiuiie-- CCI2FCCIF2: B. P. 117.6C. (47.6C.) at 760 mm., F. P. -- 31F. (--35C.). USE: As a solvent; for cold immersion cleaning, as a vapor degreasing solvent, AN five products are used at times in combination with Freon TF in stage cleaning operations. CONTAINERS: 5-, 20-, and 55-gal. nonreturnable drums. Orchem-Freon for ultrasonic or combination ultrasonic-vapor FREON--OTHER PRODUCTS: degreasing cleaning. Used as a cleaner for mech anical and electrical controls, instruments and gauges, motors and generators, electrical and 1,1,1-Chlorodifiuoroethane--CH3CClF,: B. P. 14.4F. (--9.8C.) at 760 mm. Pressure--29 psig electronic equipment and assemblies, motion picture at 68F. (20C.). USE: As a mixture with Freon-11 film, television and magnetic tapes, printed circuits. and Freon-12 to produce aerosol propellents As a flash point retarder in blends. As a simula having various solvent, density and pressure char E tion fluid fortesting rocket systems and as a hydro acteristics. As a chemical and polymer inter [ I static test fluid. Also used as an inert liquid medium for chemical processing and in extraction mediate. CONTAINERS: 8-, 20- and 120-lb. cylinders and 1,650-lb. tanks. Orchem-Freon processes. CONTAINERS: 5-, 20- and 55-gal. non- 1,1 -Difluoroethane -- Ethylidene Fluoride-- returnable drums; tank trailers and tank cars. Orchem-Freon CH3CHF2: B. P. -- 12.5F. (-24.7C.) at 760 mm. Pressure--63 psig at 70F. (21.1F.). USE: As a Freon Precision Cleaning Agent--Trichlorotrifluoroethane--CCI2FCCIF2: B. P. 117.6F. (47.6C.) at 760 mm; F. P. -31F. (-35C.). Residue content not more than 1 ppm by weight refrigerant, aerosol propellent and chemical inter mediate. CONTAINERS: 16- and 95-lb. cylinders, 1,300-lb. tanks, tank trailers and tank cars. Orchem-Freon (soluble 4- insoluble). USE: As a solvent of ex Methylene Chloride (Aerosol Grade)--Dichloro- ceptionally high purity for use in critical cleaning methane--CH2CI2: B. P. 104.2F. (40.1C.) at 760 applications, such as in white rooms, missiles, space mm. USE: As a mixture with Freon-12 and vehicles, guidance systems, etc. CONTAINERS: 5-, 20- Freon-11 to produce aerosol propellents having I and 55-gal. drums; tank trailers. Orchem-Freon various solvent and pressure characteristics. CON Freon TA Solvent--Freon TF/Acetone Azeo trope: This composition (U.S. Patent 2,999,815) has a B.P. of 111,6F. (44.2C.) at 760 mm. Freon TC -Solvent--Freon TF/Chloroform Azeotrope: This composition (patent applied for) has a B.P. of 117.3F. (47.4C.) at 760 mm. TAINERS: 55-gal. drums, tank trailers and tank cars. Orchem-Freon Vinyl Fluoride--CH2 = CHF: B. P. -97.5F. (--72.0C.) at 760 mm. Pressure--350 psig at 70F. (21.1C.). USE: As a chemical and polymer inter mediate. CONTAINERS: 3-, 15- and 50-lb. cylinders. Orchem-Freon Freon T-E 35 Solvent--Blend of Freon TF and Vinylidene Fluoride-- 1,1 -Difluoroethylene-- 'J Specially Denatured Anhydrous Ethanol: Boiling CH2 = CF2: B. P. -- 122.3F. (-85.7C.) at 760 range 94F.-171F. (34C.-77C.) at 760 mm. mm. Pressure--515 psig at 70F. (21.1C.). USE: L As a chemical and polymer intermediate. CON Freon TMC Solvent--Freon TF/Methylene TAINERS: 4-, 6-, 16- and 58-lb. cylinders. Chloride Azeotrope: This composition (U.S. Patent Orchem-Freon 2,999,817) has a B.P. of 98.0F. (36.7C.) at 760 mm. f: FRITS: See Ceramic Products, page 27. Freon T-WD 602 Solvent--Freon TF/Water FRUIT TREE SPRAY: See Lawn and Garden Products, Dispersion: (Patent applied for) Initial B.P. page 96. 117F. (47C.) at 760 mm. FUMIGANTS: See Formaldehyde Solution, page 85; USE: The above five products are selective solvents Methyl Formate, page 103; Sodium Cyanide, page 142; having kauri-butanol numbers varying from 33 VPM Soil Fumigant, page 161. 88 DUP210011233 FUMING-FUNGICIDES FUMING SULFURIC ACID: See Acids, Su/furic Acid, Oleum, page 5. FUNGICIDES AGRICULTURAL: Fermate Ferbam Fungicide: A wettable powder containing 76% ferbam (ferric dimethyldithiocarbam- ate). USE: To control plant diseases such as scab on aonles and nenrs, cedar rust on apples, blue mnW in tobacco plant beds, leaf spot and brown rot on cherries, black rot on grapes, black spot and rust on roses. CONTAINERS: 3-lb. bags (12 in a case) and 50-lb. bags. (Also see Lawn and Garden Products, page 97.) Ind.&Bio.-Bio. Fermate D Ferbam Fungicidal Composition: Black finely divided powder, containing 87.5% ferbam (ferric dimethyldithiocarbamate). USE: Sold to manu facturers or processors for preparation of fungicide dusts. CONTAINERS: 50-lb. bags. Ind.&Bio.-Bio. Manzate Maneb Fungicide: A wettable powder containing 80% maneb (manganese ethylenebisdithio- carbamate). USE: To control many fungous diseases of vegetables such as tomatoes, potatoes, celery, cucumbers, lima beans, onions, peppers, broccoli and spinach; fruit and nut crops; field crops such as sugar beets; ornamentals such as roses. CONTAINERS: 3-lb. bags (16 in a case), 4% -lb. bags (12 in a case) and 50-lb. fiber drums. Ind.&Bio.-Bio. Manzate D Maneb Fungicide: A wettable powder containing 80% maneb (manganese ethylenebisdithiocarbamate); inert ingredients include a zinc salt. USE: Same as Manzate Maneb Fungicide. CONTAINERS: 3-lb. bags (16 in a case) and 50-lb. fiber drums. Ind.&Bio.-Bio. Parzate Liquid Nabam Fungicide: A solution con taining 22% nabam (disodium ethylenebisdithio- carbamate) to be combined with zinc sulfate in the spray tank. USE: For control of early and late blights of tomatoes, potatoes and celery; certain leaf diseases of truck crops and ornamentals. CONTAINERS: 5- and 30-gal. non-returnable drums. Ind.&Bio.-Bio. Parzate D Zineb Fungicidal Composition: A finely divided powder containing 85% zineb (zinc ethylene- bisdithiocarbamate). USE: Sold to manufacturers or processors for preparation of fungicide dusts. CON TAINERS: 50-lb. bags. Ind.&Bio.-Bio. Thiram Technical: Contains 99% thiram (tetra- methylthiuramdisulfide). USE: In manufacture of fungicides. CONTAINERS: 100-lb. drums. Ind.&Bio.-Bio. Thylate Thiram Fungicide: A wettable powder con taining 65% thiram (tetramethylthiuramdisulfide), offwhite in color. USE: To control certain fungous dis eases of apples, peaches, strawberries, celery and tomatoes. It is particularly useful an varieties of apples susceptible to russeting such as Golden Deli cious and on certain red varieties where depth and uniformity of color are desirable. CONTAINERS: 5-lb. bags (10 in a case) and 50-lb. bags. Ind.&Bio.-Bio. Zerlate Ziram Fungicide: A wettable powder con taining 76% ziram (zinc dimethyldithiocarbamate). USE: To control certain plant diseases of truck crops, fruits and nuts. CONTAINERS: 3-lb. bags (12 in a case) and 50-lb. bags. Ind.&Bio.-Bio. FUNGICIDES, INDUSTRIAL: See Shirlan, page 140. FUNGICIDES, TURF: Semesan Turf Fungicide: A wettable powder con taining 25.3% hydroxymercurichlorophenol. USE: For prevention and control of brown patch and other fungous diseases on fine turf of lawns and golf greens. May be used in combination with Tersan 75 Thiram Fungicide for broader, more effective disease control and greater safety to turf. CONTAINERS: 1 '/2 -lb. cans (12 in a case) and 25-lb. drums. Ind.&Bio.-Bio. Tersan 75 Thiram Fungicide: A wettable powder containing 75% thiram (tetramethylthiuramdisulfide). USE: For treatment of turf to control brown patch and dollar spot; for control of stem rot of sweet potatoes; for control of basal rot and decay of gladiolus bulbs. CONTAINERS: 3-lb. bags (12 in a cose). Ind.&Bio.-Bio. Parzate C Zineb Fungicide: A wettable powder containing 75% zineb (zinc ethylenebisdithiocarbam- ate). USE: For the control of fruit russeting and greasy spot on oranges and grapefruit in Florida, Texas and Louisiana; to control early and late blights of toma toes, potatoes and celery; downy mildew and certain other leaf diseases of many vegetable crops; tobacco blue mold; for summer control of scab, sooty blotch. Brooks spot and black rot on apples. CONTAINERS: 3-lb. bags (16 in a case), 5-lb. bags (10 in a case) and 50-lb. bags. Ind.&Bio.-Bio. Tersan OM Thiram-Organic Mercury Turf Fungi cide: A wettable powder containing 45% thiram (tetramethylthiuramdisulfide) and 10% hydroxymercu richlorophenol. A combination product utilizing the advantages of both thiram and organic mercury; ready-to-use formula eliminates spray tank mixing of separate products. USE: For the prevention and con trol of large brown patch, dollar spot, copper spot and certain other diseases on golf greens, grass tennis courts, lawns and other fine turf. CONTAINERS: 3-lb. cans (6 in a case). Ind.&Bio.-Bio. 89 DUP210011234 FURAN-GUARDS H FURAN (FURFURANE)-(CH)40: A highly volatile, GASOLINE COLORS: See Petroleum Chemicals, Dyes, colorless liquid, miscible with most organic solvents; Petroleum, page 113. a slightly soluble in water. Boiling range 80.6F.-89.6F. jn (27C.-32C.); F.P.-122.10F. (-85.61C.) ; Flash Point (TAG. closed cup) -32F. (-35.6C.) ; Sp. Gr. (20/4C.) GASOLINE TROWELS: See Tools, Construction and Industrial, page 155. ,1 0.936-0.940; wt. per gal. 7.8 lb. USE: As organic re G.B.S. GLOBULAR SODIUM BISULFATE: See Sodium actant in Diels-Alder, substitution, addition and ring Bisulfate, page 142. opening reactions; intermediate in the manufacture of i pyrrole, thiophene, and derivatives. Useful in the syn thesis of pharmaceutical, agricultural, and industrial GEL: See Explosives, Blasting Agents, Tovex Gel, page 62. products. CONTAINERS: 7-lb. (1-gal.) containers, 35- and 400-lb. drums, tank cars. Electrochem. GELATIN DYNAMITE: See Explosives, Dynamites, page 62. FURNITURE: See Surplus Materials, page 146. FURNITURE FINISHES: See Finishes, Refinish, page 72; Finishes, Industrial,page 75. FUSE LIGHTERS: See Explosives, Blasting Accessories and Supplies, page 60. FUSES, EXPLOSIVE: See Explosives, Blasting Accessories and Supplies, page 60. G GELEX DYNAMITES: S ee Explosives, Dynamites, page 62. GELOBELm PERMISSIBLE EXPLOSIVES: See Explo sives, Permissible Explosives, page 63. GLASS ENAMELS: See Ceramic Products, page 26. GLASS FINISH, SCRATCH-RESISTANT: See Tetrabutyl Titanate Technical, page 151; Tetraisopropyl Titanate Technical, page 151. G-942TM TANNING AGENT: An aqueous solution of the partial sodium salt of a polymeric carboxylic acid. USE: In processing lightweight skins for the production of high grade suede and grain leathers. Excellent properties for white clear through leathers. Possesses high skin-plumping ability. CONTAINERS: 500-lb. drums. Ind.&Bio.-Ind. G SALT TECHNICAL: 2-Naphthol-6,8-disulfonic acid, dipotassium salt. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. GLASS FABRICS, TAPES, LAMINATES, COATED: See Coated Fabrics, Armalon, page 43; Finishes, Industrial, Synthetic Resin Coated Fabrics and Laminates, Lecton, page 76. GLAZE STAINS: See Ceramic Products, page 27. GLAZING PUTTIES: See Finishes, Automotive, page 70; Finishes, Industrial, page 75; Finishes, Refinish, page 73. GLOBULAR SODIUM BISULFATE: See Sodium Bisul fate, page 142. GALVANIZING FLUXES: See Fluxes, Zaclon, page 84. GALVANOMETER, BLASTING: See Explosives, Blasting Accessories and Supplies, page 59. GAMEMASTER RIFLE: See Arms, page 16. GAMMA ACID DRY TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. GLOW LIQUID CAR WASH: See Automotive Special ties 7 Products, page 19. GLYCOLIC ACID: See Acids, Hydroxyacetic Acid, page 4. GOLD, GOLD COLORS, GOLD POWDERS: See Ceramic Products, page 27; Electronic Materials, page 55. GAMMA ACID PASTE TECHNICAL: 7-Amino-1- GRAPHIC ARTS CHEMICALS: See Photographic I naphtho!-3-sulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. Products, page 121. GRAPHIC ARTS FILMS AND PAPERS: See Photo GARDEN PRODUCTS: See Lawn and Garden Products, graphic Products, page 116. page 96. GREASE STABILIZER: See Petroleum Chemicals, Grease GAS, DIELECTRIC: See Freon Products, Freon-115, and Lubricating Oil Additives, Ortholeum 300, page Freon-1 76 and Freon C-318, page 87. 114. GAS GUARD: See Automotive Specialties 7 Products, page 19. GRINDERS (AIR AND FLEXIBLE SHAFT): See Tools, Construction and Industrial, page 155. GASOLINE ANTIOXIDANTS: See Petroleum Chemicals, Antioxidants, Petroleum, page 112. GUARDS FOR STUD DRIVER: See Tools, Powder Actuated, Stud Drivers, page 157. 90 DUP210011235 GUN-HOLE GUN fSPRAY) AND EQUIPMENT CLEANER: See Finishes, Refinish, Solvents, page 73. GUNS: See Arms, page 16. GYPSUM A DYNAMITE: See Explosives, Dynamites, page 62. H H ACID TECHNICAL: 8-Amino-l-naphthol-3,6-disul- fonic acid, sodium sait. Paste form; a Chemical Intermediate. Orchem D. & C. HALOGEN TIN PLATING. See Electroplating Products, page 57. HALOGENATED HYDROCARBONS: See Chloroform, page 40; Freon Products, page 85; Methyl Chloride, page 103; Methylene Chloride, page 104; Perchlorefhylene, page 110; Trichlcrethylene, page 158; Valclene, page 160. HALOPONT PIGMENT COLORS: See Dyes, page 54. HAMMER DRILLS: See Tools, Construction and In dustrial, page 155. HAND BRUSHES: See Toiletries, page 153. HAND PROTECTIVE CREAM: See Automotive Specialties 7 Products, Pro-Tele, page 20. HDP PRIMERS: See Explosives, Blasting Agents, page 62. HEAT TRANSFER MEDIA: See Anisole, page 14; Freon Products, page 85; Hitec, below; Methylene Chloride, page 104; Sodium (Metal), page 741; Trichlorethylene, page 158. HEAVY DUTY STOP LEAK: See Automotive Spe cialties 7 Products, page 19. HELIOZONE INHIBITOR: See Protective Agents for Natural and Synthetic Rubber, page 131. HERBICIDES: See Weed and Brush Killers, page 162, HEROX NYLON FILAMENTS: See Plastics, page 126. HEXACHLOROEPOXYOCTAHYDRO-ENDO, EXODIMETHANONAPHTHALENE: See Seed Treatments, Delsan A-D, page 139. HEXAFLUOROETHANE: See Freon Products, Freon-116, page 87. HEXAHYDROPHENOL: See Hexalin Cyclohexanol, directly below. HEXALIN CYCLOHEXANOL--TECHNICAL-- C6Hu OH: Colorless liquid; F. P. (pure) 25.2C. (usually shipped with 2.25% methanol as antifreeze); B. P. (pure) 161.1 C. USE: Solvent in lacquers, shellacs and varnishes; homogenizer and stabilizer in soap, drycleaning and textile industries; intermediate for chemicals, plasticizers, lubricating oil additives. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. HEXAM E THYLENEDIAMINE CARBAMATE: See Ac celerators for Natural and Synthetic Rubber, Diak No. 7, page I. HEXAMETHYLENETETRAMINE (UROTROPIN, HEXAMINE) -- (CH2)6N4: A white powder or granular solid; soluble in water, chloroform and alcohol. USE: In manufacture of phenolic molding resins, cork products, rubber accelerators and pharmaceuticals; in chemical synthesis; for hardening casein, glue and other proteins. CONTAINERS: 50-lb. multi-wall bags, 150- and 200-lb. drums. TECHNICAL GRADE: Granular, Granular FF, Powder and Powder FFforms. Ind.&Bio.-Ind. HEXAMETHYLENIMINE C6H13N: Clear, colorless liquid with an ammonia-like odor. B. P. 138C., F. P. -- 37C. Density (20/4C.) 0.8799. USE: Intermediate for phar maceutical, agricultural and rubber chemicals. CON TAINERS: 5- and 55-gal. drums. Ind.&Bio.-Ind. HEXOGEN: See Cyc/ofrimefhyienefr/niframine, page 46. HI-CAP DYNAMITE: See Explosives, Dynamites, page 62. HIGH GLOSS FLOOR WAX: See Professional Floor Maintenance Products, page 131. HIGH SPEED TINNING FLUX: See Fluxes, Tinning, page 84. HIGHWAY PATROL CARTRIDGES: See Ammunition, page 13. HI-SKOR SMOKELESS POWDER: See Smokeless Powder, page 141. HI-SPEEDm CARTRIDGES: See Ammunition, page 12. HITEC HEAT TRANSFER SALT: A eutectic mixture comprised of sodium nitrite (NaNOz), sodium nitrate (NaN03) and potassium nitrate (KN03). USE: As a heat transfer medium for both heating and cooling operations in the range of 300--1,000F, such as maintaining re actor temperature, high temperature distillation and preheating of reactants. CONTAINERS: 150- and 400-lb. fiber drums. Explo.-C.P.S. HI-VELOCITYTM GELATINS: See Explosives, Dynamites, page 62. HI-WAY MASTER CARTRIDGES: See Ammunition, page 12. HOLE PUNCHERS: See Tools, Powder Actuated, page 156. 91 DUP210011236 G 3 HOMOPHTHOL1C-HYDROGEN HOMOPHTHALIC ACID TECHNICAL: a-Carboxy-o- of textiles such as cotton, wool, silk, rayon, linen and loluic acid. Powder form; a Chemical Intermediate. Orchem D. & C. blends of these fibers with synthetic fibers; bleaching of wood pulps such as cold soda, groundwood, kraft, HOMOPHTHALIMIDE (TAUTOMERIC FORM): Sold as 1,3-lsoquinolinediol, a Chemical Intermediate. Orchem D. & C. sulfite and recovered pulp; bleaching of practically all vegetable and animal fibers, fur, straw, etc.; fur carroting; purification of metal salt solutions; treat ment and sterilization of starch, glue, etc.; bleaching HOT MELT BOOKBINDING ADHESIVES: See Ad hesives, Hot Melt Bookbinding, page 6. HOT WIRE FUSE LIGHTERS: See Explosives, Blasting Accessories and Supplies, page 60. of wood panels and furniture; bleaching of oils and fats; oxidation of vat dyes; dilution for pharmaceutical and cosmetic uses; general oxidizing reactions and for the manufacture of alkaline earth peroxides, amine oxides and organic peroxides such as methyl ethyl HOUSEHOLD CEMENT: See Cements, Duco Cement and Household Cement, page 26. ketone peroxide; in epoxidation and hydroxylation reactions; as a polymerization catalyst for unsaturated monomers such as butadiene, styrene, etc.; as a vis HOUSE PAINT: See Finishes, Trade Sales (Consumer Products), page 80. HYDAN FEED SUPPLEMENT: See Nutrition and Therapy Products, page 108. cosity control agent for starch and cellulose deriva tives; in electroplating; as a gasifying agent for manu facture of such materials as foam rubber. CONTAINERS: 135- and 250-lb. nonreturnable polyethylene drums; 250-lb. aluminum drums; 4,000-, 6,000- and 8,000- HYDRAPHTAL TEXTILE PROCESSING AGENT: gal. tank cars; tank trucks. Combination solvent and detergent for textile scouring. Orchem D. & C. Albone 50 Hydrogen Peroxide: H202 content 50% by weight; active oxygen 23.5% by weight; weight HYDROCARBON RUBBER: See Synthetic Rubber, Nordel, page 149. HYDROCARBON SULFONATES: See Alkanol, per gal. 9.98 lb. at 20C.; density 1.196 g/cc at 20C.; pH (Beckman meter) 2.4-2.7. USE: Same as Albone 35, above. CONTAINERS: 265-lb. drums, 4,000-, 6,000- and 8,000-gal. tank cars, tank trucks. page 6; Avitone, page 21. Albone 70 Hydrogen Peroxide: H202 content 70% HYDROCHLORIC ACID: See Acids, page 3. HYDROCYANIC directly below. ACID: See Hydrogen Cyanide, by weight; active oxygen 33% by weight; weight per gal. 10.7 lb. at 25C.; density 1.288 g/cc at 20C.; pH (Beckman meter) approx. 1.0. USE: In organic syntheses where minimum water content is required. HYDROFLUORIC ACID: See Acids, page 4. CONTAINERS: 285-lb. double-compartment drums; 275-lb. single-compartment drums (for carload or HYDROGEN CYANIDE (HYDROCYANIC ACID; truckload shipment only); 4,000-, 6,000- and 8,000- 31 PRUSSIC ACID)--HCN: A clear, colorless liquid con gal. tank cars. f taining 99.5% min. HCN. Odor of bitter almonds. Albone 70 Hydrogen Peroxide (Dilution Grade): Vapors extremely poisonous. Miscible with water and Physical properties same as those of Albone 70, most organic solvents. Sp. Gr. 0.714 at 5C; 0.695 at above. USE: Chiefly in the textile and pulp industries, 18C. ;B. P. 25.7C. ; F. P. -13.3C. USE: In chemical for dilution and storage at 35% and 50% concentra synthesis of sequestrants, polymers, weed killers, and tions. CONTAINERS: Tank cars and tank trucks. pharmaceuticals; grain fumigation. CONTAINERS: 6,000- and 11,000-gal. tank cars. Electrochem. Albone 90 Hydrogen Peroxide: H202 content 90% by weight; active oxygen 42.3% by weight; weight HYDROGEN NITRATE: See Acids, Nitric Acid, page 4. per gal. 11.61 lb. at 20C.; density 1.3913 g/cc at 20C. USE: Monopropellent and fuel oxidant. CON HYDROGEN PEROXIDE--H202: TAINERS: 285-lb. double-compartment drums; 275-lb. single-compartment drums (for carload or truckload shipment only); 4,000-, 6,000- and 8,000-gal. tank s A clear, colorless liquid; slightly sharp odor; miscible in cars. all proportions with water; liberates oxygen when de composed. Electrochem. Perone 30 Hydrogen Peroxide (Electronic Grade): ! H202 content 30% by weight; active oxygen content f Albone35 Hydrogen Peroxide: H202 content 35% 14.1% by weight; weight per gal. 9.26 lb. at 20C.; I by weight; active oxygen 16.5% by weight; weight density 1.11 g/cc at 20C. Specifications equal or per gal. 9.44 lb. at 20C.; density 1.133 g/cc at exceed A.C.S. specifications for reagent grade. USE: 20C.; pH (Beckman meter) 3.4-3.8. USE: Bleaching Etching and cleaning electronic components; special DUP210011237 HYDROGEN-HYVAR HYDROGEN PEROXIDE (Cont.) uses requiring exceptionally high purity. CONTAINERS: 130-lb. nonreturnable polyethylene-in-steel overpack drums. Perone 35 Hydrogen Peroxide: Physical properties similar to those of Albone, above. USE: Food proces sing and specialty uses. CONTAINERS: 135- and 250-Ib. nonreturnable polyethylene drums; 4,000, 6,000- and 8,000 tank cars; tank trucks. Perone 50 Hydrogen Peroxide: Physical properties similar to those of Albone50, above. USE: Food proc essing and specialty uses. CONTAINERS: 265-lb. drums; tank trucks (to most locations in NE, SE and Central U.S.); 4,000-, 6,000- and 8,000-gal. tank cars. HYDROL: Sold as 4,4'-Bis(dimethylamino)benzhydrol Technical, a Chemical Intermediate. Orchem D. & C. HYDROSULFITE CONC.: Sodium hydrosulfite. A re ducing agent used in the dyeing of vat colors, stripping of dyes and in many chemical reactions where a reducing agent is needed. Also used for bleaching groundwood, unbleached pulp and old papers. Orchem D. & C. HYDROXIDE, AMMONIUM: See Ammoniacal Liquor, page 1 7. 1,4-HYDROXY ACID: Sold as Nevile & Winther's Acid Technical, a Chemical Intermediate. Orchem D. & C. HYDROXYACETIC ACID: See Acids, page 4. 1 -HYDROXY-4 - (ALPHA- HYDROXY - m - TOLUIDINO) ANTHRAQUINONE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. p-HYDROXYDIPHENYLAMINE: Sold as p-Anilino- phenol Technical, a Chemical Intermediate. Orchem D. & C. HYLENE ORGANIC ISOCYANATES Hylene M-50 Organic Isocyanate: Methylene bis (4-phenyl isocyanate)--(C6H4NCO)2CH2. 50% solu tion in monochlorobenzene; dark brown liquid; Sp. Gr. 1.16. USE: In elastomer based adhesives. CONTAINERS: 45- and 500-lb. drums. Elastomers Hylene MP Organic Isocyanate: Bis phenol adduct of methylene bis (4-pnenyi isocyanate). Grayish-white powder; water stable; Sp. Gr. 1.32 .03. USE: A bonding agent and adhesive assistant for adhering Dacron polyester fiber to rubber compositions in water emulsion or latex systems. Co n t ain er s : 125-lb. drums. Elastomers Hylene T Organic Isocyanate: Toluene-2,4-Diisocy- anate--CH3C6H3(NCO)2. Water-white to pale yellow liquid; Sp. Gr. 1.22. USE: In manufacture of urethane foam, finishes, adhesives and rubbers. CONTAINERS: 45- and 500-ib. drums, tank trailers and tank cars. Elastomers Hylene TM Organic Isocyanate: 80% toluene-2,4- diisocyanate (See Hylene T, above) and 20% toluene-2,6-diisocyanate--CH3C6H3(NCO)2. Sp. Gr. 1.22. Water-white to pale yellow liquid. USE: In manufacture of urethane foam, finishes, adhesives and rubbers. CONTAINERS: 45- and 500-lb. drums, tank trailers and tank cars. Elastomers Hylene TM-65 Organic Isocyanate: 65% toluene 2,4-diisocyanate and 35% toluene 2,6-diisocyanate (See Hylene TM, above). Sp. Gr. 1.22. Water-white to pale yellow liquid. USE: In manufacture of urethane foam, finishes, adhesives and rubbers. CONTAINERS: 45- and 500-lb. drums, tank trailers and tank cars. Elastomers HYDROXYMERCURICHLOROPHENOL: See Seed Treat ments, Semesan Be/ S, page 739. HYPALON SYNTHETIC RUBBER: See Synthetic Rubber, page 147. HYDROXYMERCURINITROPHENOL. See Seed Treat ments, Semesan Seed Disinfectant, page 139. 4-HYDROXYMETANILIC ACID: Sold as 2-Amino-l- phenol-4-sulfonic acid Technical, a Chemical Inter mediate. Orchem D. & C. N-( 7-HYDROXY-1 -NAPHTHYL) ACETAMIDE TECH NICAL: l-Acetylamino-7-naphthol. Granular paste form; a Chemical Intermediate. Orchem D. & C. 1 - HYDROXY - 4 - p - TOLUIDINOANTHRAQUINONE TECHNICAL: Iris R Base. Powder form, a Chemical Intermediate. Orchem D. & C. HYPOS ULFITE, SODIUM: See Sodium Thiosulfate, page 144. HYTROL O CYCLOHEXANONE-C6H,0O: Colorless liquid; B. P. 156.7C.; F. P. -47C. USE: As a solvent in the textile, paint and varnish industries, especially for vinyls; as a chemical intermediate; lube oil additive. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio ,-lrtd. HYVAR ISOCIL WEED KILLER: See Weed and Brush Killers, Hyvar, page 162. HYVAR X-WS BROMACIL WEED KILLER: See Weed and Brush Killers, Hyvar X-WS Bromacil, page 162. 93 DUP210011238 r' i is ii si I i Ti ill. 'H 1 A ' |f : IGNITACORD-INSECTICIDES ! IGNITACORD FUSE LIGHTER: See Explosives, Blasfing Accessories and Supplies, page 60. 1-1 -lMINOBIS(4-AMINOANTHRAQUINONE) TECH NICAL: 4,4-Diamino-l,l-dianthrimide. Crystalline solid form; a Chemical Intermediate. Orchem D. & C. 6.6-IMINOBIS( 1-NAPHTHOL-3-SULFONIC ACID): Sold as Rhoduline Acid Technical, a Chemical Inter mediate. Orchem D. & C. 1-1 -IMINODIS( 4-NITROANTHRAQU1NONE) TECH NICAL: 4,4-Dinitro-l,l -dianthrimide. Paste form; a Chemical Intermediate. Orchem D. & C. 1,1-IMINODIANTHRAQUINONE TECHNICAL: 1,1Dianthrimide. Powder form,-a Chemical Intermediate. Orchem D. & C. IML-1: See Miscellaneous Chemicals for Natural and Synthetic Rubber, page 105. IMLAR CHEMICAL RESISTANT FINISH: See Finishes, Trade Sales (Consumer Products), Chemical Resistant Finishes, page 77. IMPACT WRENCHES: See Tools, Construction and Industrial, page 155. iMPEDEX SODIUM PROPIONATE: See Nutrition and Therapy Products, page 108. IMPROVED MILITARY RIFLE POWDERS (l.M.R.):See Smokeless Powder, page 140. IMRON POLYURETHANE CALKING COMPOSITION: See Finishes, Trade Sales (Consumer Products), Calking Compositions, page 77. IMRON TEXTILE FLOOR FINISH: See Finishes, Trade Sales (Consumer Products), Textile Floor Finish, page 77. INDANTHRONE BLUE PIGMENTS: See Pigment Colors, page 124. INHIBITED ACIDS. See Acids, Duclean Nos. 1 and 2, page 3. INHIBITORS: Acid and Rust: See Automotive Specialties 7 Prod ucts, page 18. Copper (Metal): See Petroleum Chemicals, Metal Deactivators. Petroleum, page 114. Copper Inhibitor: See Protective Agents for Natural Corrosion: See MBT, page 101. Gasoline: See Petroleum Chemicals, page 113. Rust: See Automotive Specialties 7 Products, page 18. Sun-Checking: See Protective Agents for Natural and Synthetic Rubber, Heliozone, page 131. INSECTICIDES: (Also See Lawn and Garden Products, pages 96 to 98.) Dairy Cattle Insecticide: Tan wettable powder re sidual insecticide containing 50% technical meth- cxychlor. USE: To control hornflies on dairy cattle (dust application) and other livestock, and for fly control in dairy barns and premises. CONTAINERS: 1-lb. canisters (24 in a case). Ind.&Bio.-Bio. EPN 300 Insecticide: A wettable powder containing 25% ethyl p-nitrophenyl thionobenzenephosphonate. USE: As an insecticide to control certain mites and insects such as plum curculio, grape berry moth and European corn borer and for boll weevil and certain other cotton insects. CONTAINERS: 3-lb. bags (12 in a case). Ind.&Bio.-Bio. EPN Technical: Average assay 87% ethyl p-nitro- phenyl thionobenzenephosphonate. USE: Used by formulators for preparation of wettable powder, granular and emulsifiable insecticides. CONTAINERS: 520-lb. drums. Ind.&Bio.-Bio. Marlate 2-MR Methoxychlor Insecticide: Emulsifi able formulation containing 2 pounds technical meth oxychlor per gallon. USE: For control of certain insect pests of forage crops and certain livestock; in grain storage bins; as a space spray for flies. CONTAINERS: 1-gal. cans (6 in a case), 5- and 30-gal. drums (non- returnable). Ind.&Bio.-Bio. Marlate 50 Methoxychlor Insecticide: A wettable powder containing 50% technical methoxychlor. USE: For control of hornflies on farm animals (including dairy cattle) by direct dusting; as a spray or dip on farm animals (except dairy cattle); as a spray in farm buildings, and for control of insect pests of vegetables, fruits, forage crops and stored grain. Very low toxicity to warm-blooded animals. CONTAINERS: 4-lb. bags (12 in a case) and 50-lb. bags. Ind.&Bio.-Bio. 90% Technical Methoxychlor Oil Concentrate: Off- white solid- UsE: Sold on|y to manufacturers or proc essors for preparation of aerosol and other insecticide formulations. CONTAINERS: 50-lb. baas and DUP210011239 INSECTICIDES-ISODIBENZANTHRONE INSECTICIDES (Cont.) Mersecf Aldrin Seed Insecticide: See Seed Treat ments, Mersecf, page 139. n.. %j \j Ann d L.i _________a _______________I_________ a __________j.:i_ rum tuu r iiviuiiici i i v nnuiyAci: m vciaumc photometric analyzer of proven dependability and unique modular construction; suitable for in-process analysis of many gaseous, liquid or solid samples, even at extremes of temperature and/or pressure. Continuously detects and reports presence of com pounds which selectively absorb ultraviolet or visible light (210-1000 mu range). Models are available also to measure film thickness, color, turbidity, haze, optical rotation and other optical properties. Op erates dependably with minimum maintenance under rigorous conditions often found in chemical process plants. Linear output over 10,000:1 light absorption range (0-0.1 to 0-3.5 abs. units). Features freedom from interference caused by dirt or other neutral absorbers in the sample. Other features: Internal span calibration; automatic zero standardization; housing suitable for hazardous locations; response time as fast as 0.001 second. Development-1 .P.D. Du Pont 500 Optical Thickness Gage: Extremely compact instrument for continuous measurement of thickness of transparent and semi-transparent films on the production line or in the laboratory. Utilizes either transmitted or reflected light. Designed for films ranging from 0.0001 in. to 0.020 in. thickness. Unit will differentiate between films differing in thickness by 0.000002 in. or more. Standard response speed 1/10 second. Area of view is 1/16 in. to 1/2 in. Non standard units are available on special order. Does not require precision positioning. Distance from film is not critical. Non-hazardous, non-contacting and not affected by air density variation or film tempera ture. Millivolt output for use with conventional process indicating, recording, and control equipment. Development-1.P.D. Du Pont 900 Differential Thermal Analyzer: A compact, sensitive and versatile instrument for the measurement of heat effects accompanying chemical and physical reactions. Endothermic and exothermic changes in milligram-sized samples are recorded on an x-y plotter as a linear function of the temperature of the sample. The temperature interval from -- 150C. to 1200C. is covered at sensitivities ranging from 10 to 200C. per in. Differential temperature sensi tivity is variable from 0.1 to 10C. per in. Tempera ture is scanned at rates continuously adjustable from + 30C. per minute to --30C. per minute. Samples may be analyzed under vacuum or in controlled atmosphere. Plug-in modules include Du Pont 940 Thermal Penetrometer and Du Pont 950 Thermogravimetric Analyzer. Accessories permit remote or visual operation. The 900 is broadly applicable to the study of phase transitions, absorption-desorption phenom ena, thermal stability, loss of volatiles, and solid ______ c____ I---------------------L_____ I____ i--I !_ ,L. ,-_L. aiuic idi_iiuiis iu i ic9cuif.il uuu \.criuiwi m me ictir nologies of organic and inorganic chemicals, phar maceuticals, polymers, paints and inks, fuels and propellents, explosives, phosphors, forest products, cement, soils, minerals, metal and ceramics. Development-1.P.D. Du Pont 940 Thermal Penetrometer: A plug-in module for the Du Pont 900 DTA; it measures change of modulus of materials as a function of temperature. The 940 utilizes the temperature programmer-con troller and the x-y plotter in the 900 console to record penetration or displacement as the sample is program- heated. Development-1.P.D. Du Pont 950 Thermogravimetric Analyzer: A com pact, all solid-state analyzer for recording weight loss of solid and liquid samples to 1200C., either as a function of temperature or of time. The 950 is a plug-in module for the Du Pont 900 Differential Thermal Analyzer. It utilizes the temperature programmercontroller and the x-y plotter in the 900 console to record weight changes as small as 2 micrograms. The 950 permits analysis under vacuum, atmospheric pressure or slightly positive flushing pressure. It is useful for determining loss of volatiles, oxidative degradation, thermal decomposition, reactions of materials with gaseous environments, or any other reaction where a weight change occurs. Development-1.P.D. INSULATION, MATERIALS FOR: See Baymal, page 21; Coated Fabrics, Armalon, page 43; Lecton, Pyre-M.L., page 7b; Film, Mylar, Tedlar, Teflon, pages 66 to 67; Finishes, Industrial, Wire Enamels, page 76; Hylene Organic Isocyanates, page 93; Plas tics, A/afhon, Ru/an, Teflon, pages 125 to 128; Syn thetic Rubber, page 146; Tipersul, page 153. INTENSIFYING SCREENS: See Radiographic Products, page 133. INTERMEDIATES: See Chemical Intermediates, pages 29 to 38. IRIS R BASE: Sold as l-Hydroxy-4-p-Toiuidinoanthra- quinone Technical, a Chemical Intermediate. Orchem D. & C. ISODIBENZANTHRONE: Sold as Isoviolanthrone Tech nical, a Chemical Intermediate. Orchem D. & C. 95 DUP210011240 1| >1 | ISOBUTYL-LAWN ISOBUTYL METHACRYLATE: See Methacrylate Mono mers, page 102. KRUMBLE BALL CARTRIDGES: See Ammunition, page 13. ISOBUTYL METHACRYLATE POLYMER: See Resins (Not Molding), Luciiem 2045, page 136. ISOC1L: See Weed and Brush Killers, Hyvor, page 162. ISOCYANATES, ORGANIC: See Hy/ene Organic L LABORATORY REAGENTS, CP: See Acids, Acetic, Hydrochloric, Nitric, Sulfuric, pages 3 to 5; Ammonium Hydroxide, page 11. LACQUER REMOVING SOLVENTS: See Finishes, Re finish, page 73. 1,3-ISOQUINOLINEDIOL TECHNICAL: Homophthalim- ide (Tautomeric Form). Crystalline solid form; a Chemical Intermediate. Orchem D. & C. ISOVIOLANTHRONE TECHNICAL: Isodibenzanthrone. Amorphous powder form; a Chemical Intermediate. Orchem D. & C. LACQUERS: See Finishes, Automotive, page 68; Finishes, Refinish, page 77; Finishes, Industrial, page 74. LAMINATES: See Coated Fabrics, Armalon, page 43; Finishes, Industrial, Synthetic Resin Coated Fabrics and Laminates, Lecton, page 76. LATEX, NEOPRENE: See Synthetic Rubber, page 149. J J ACID DRY TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. LATYL CARRIER A: Dyeing assistant for increasing the dyeability of Dacron polyester fiber. Orchem D. & C. LATYL DYES: See Dyes, page 54. J ACID PASTE TECHNICAL: 6-Amino-l-naphthol-3- sulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. j ACiD UREA TECHNICAL: 6,6'-Ureylenebis(l- LAURENT'S ACID TECHNICAL: 5-Amino-l-naphthol- enesulfonic acid. Paste form; a Chemical Inter mediate. Orchem D. & C. LAURYL ALCOHOL: See Lorol 5 and Lorol 7, page 99. naphthol-3-sulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. LAWN AND GARDEN PRODUCTS: JET FUEL ADDITIVES: See Petroleum Chemicals, Fuel Oil Additive, Petroleum, J FA-5, page 114. Combination Insecticide-Fungicide Products JET TAPPERS: See Explosives, Blasting Accessories and | Supplies, page 60. Deenall Rose Insecticide, Fungicide, Miticide: A wettable powder for use as a dust or water spray. USE: Three-way protection for roses and many other K flowers. CONTAINERS: 10-oz. dusters and 2-lb. can ;! isters. KARMEX DIURON WEED KILLERS: See Weed and F.&F.-Cons. Brush Killers, page 162. Fruit Tree Spray: Wettable powder designed espe cially for water spray application. USE: For all sprays KLEANBORE PRIMING: See Ammunition, page 11. during the growing season on apples, peaches, cherries, pears, plums, quince, strawberries, currants KLEANROL SOLDERING FLUX: See Flux, Soldering, and gooseberries. Controls major insect pests and page 84. KNIVES, DIAMOND: See Diamond Knives, page 47 fungous diseases damaging home fruit plantings. CONTAINERS: 1-lb. 8-oz. canisters. F.&F.-Cons. Tomato-Vegetable Spray or Dust: A wettable KOCH ACID TECHNICAL: 8-Amino-1,3,6-naphtha lene- powder used as a dust or spray. USE: Used on all trisulfonic acid, disodium salt. Paste form; a Chemical Intermediate. Orchem D. & C. common vegetables for the control of a wide range of insect pests and is highly effective against many fun KRENITE 10 FERTILIZER SOLUTION: See Fertilizers, page 64. gous diseases, including both early and late blights on tomatoes and potatoes. CONTAINERS: 10-oz. dusters, 2-lb. canisters and 3-lb. bags. F.&F.-Cons. 96 BWsKt?-3ss-' ikit DUP210011241 LAWN LAWN AND GARDEN PRODUCTS (Cont.) Dormant and Pruning Products Dormant and Summer Spray: A newly developed special oil to control hard-to-kill scale insects. Con tains malathion for added insecticidal value. USE: Used both as a dormant oil spray and during the growing season. CONTAINERS: 16-oz. bottles. F.&F.-Cons. Rose Cane Sealer: A special formulation which sets quickly, forming a protective seal to prevent entry of moisture and foreign matter. USE: Swab on pruning cuts of roses and other small wounds of trees and shrubs. CONTAINERS: 2-oz. bottles. F.&F.-Cons. Tree Wound Dressing: Pressurized sprayer. USE: For treatment of pruning, grafting or other wounds of shade trees, fruit trees, ornamentals, roses and other woody plants. Sets quickly, forming a protective seal. CONTAINERS: 5-and 12-oz. aerosol cans. F.&F.-Cons. Fungicides Fermate Ferbam Fungicide: Highly effective disease control agent, safe on a wide range of plants, for water spray application. USE: For black spot and rust of roses, as well as many diseases of other flowers, vegetables, fruits and berries. CONTAINERS: 1-lb. 2-oz. canisters. F.&F.-Cons. Sulforon X Wettable Sulfur: A microfine sulfur designed especially as a water spray. USE: Used for control of powdery mildew of roses and other orna mentals, as well as for control of scab on pears and apples. It also controls brown rot on cherries, peaches and plums. CONTAINERS: 1-lb. 5-oz. canisters. F.&F.-Cons. Tersan 75 Thiram Fungicide: A thiram fungicide. USE: For treatment of turf to control brown patch, dollar spot and snow mold. It will not shock or dis color grass or retard growth. CONTAINERS: 8-oz. cans. F.&F.-Cons. Insecticides Aphid & mire Spray: Emulsifiable insecticide con taining 50% malathion. USE: To control aphids, red spiders and many other insects on flowers, orna mentals, evergreens, fruits and vegetables. CON TAINERS: 4-fl. oz. and 1-pt. bottles. F.&F.-Cons. 6% Chlordane Dust: Insecticide for control of ants, Japanese beetle grubs, roaches, spiders, chiggers and many other insect pests of the lawn, garden soil and household. CONTAINERS: 10-oz. dusters and 2-lb. 4-oz. canisters. F.&F.-Cons. 72% Chlordane Insecticide: Emulsifiable insecticide for use as a liquid spray. USE: Concentrated form of chlordane for insect control on lawns, flowers, shrubs and ornamental plants and as a residual spray around building foundations for the control of ter mites. CONTAINERS: 8- and 16-f). oz. bottles. F.&F.-Cons. 50% DDT: Wettable powder insecticide for use as a water spray. USE: Concentrated form of DDT for insect controi on many garden and ornameriiul plants, on lawns and as residual spray around buildings. CONTAINERS: 15-oz. canisters. F.&F.-Cons. Japanese Beetle Killer: A new highly effective in secticide for the control of Japanese beetles. Also effective against tent caterpillars, aphids, bagworms, leaf miners and many other insects. USE: Simply mix with water and spray. CONTAINERS: 6-oz. canisters. F.&F.-Cons. Lawn Insecticide: Contains 23% chlordane, a highly effective insecticide. USE: Can be applied to lawns in spring or fall for control of Japanese beetle grubs, white grubs, cutworms, wireworms and ants. CON TAINERS: 12-lb. bags. F.&F.-Cons. 1% Rotenone Spray or Dust: A versatile insecticide for general garden use. USE: May be applied as a dust or spray. Safe to use on a wide variety of garden plants, including cabbage, beans, asparagus, cucum bers and sweet com. CONTAINERS: 1 V2 -lb. canisters. F.&F.-Cons. Smite Garden Insecticide: Emulsifiable insecticide containing 12.5% methoxychlor and 12.5% mala thion. USE: For control of many insects on vegetables, fruits, flowers, ornamentals and evergreens. Also may be used indoors for control of household insect pests. CONTAINERS: 1-pt. and 1 -qt. bottles. F.&F.-Cons. 50% Technical Methoxychlor: Wettable powder insecticide for use as a water spray. Has very low order of toxicity to humans; may be used close to harvest time. USE-. For insect control on garden and ornamental plants; also highly effective as residual spray around buildings. CONTAINERS: 12-oz. canisters. F.&F.-Cons. J-K-L Lawn Seeds Sunny: Specially formulated for areas of pre dominantly sunny conditions. Will also tolerate partial shade. CONTAINERS: 1- and 5-lb. boxes. F.&F.-Cons. Shady: Specially formulated for areas of pre dominantly shady conditions. Will also tolerate partial sun. CONTAINERS: 1-and 5-lb. boxes. F.&F.-Cons. 97 DUP210011242 V LAWN-LEAD LAWN AND GARDEN PRODUCTS (Cont.) Sturdy: Specially formulated for problem area. Will withstand heavy traffic. Contains quick germinating seeds to prevent washout. CONTAINERS: 1%- and 5-lb. boxes. F.&F.-Cons. Plant Food Azalea and Evergreen Food: A complete plant food especially formulated for plants which require acid soil conditions. Contains Du Pont Uramite Fertilizer Compound. USE: One application yearly supplies balanced plant feeding for a full growing season. CONTAINERS: 5-lb. boxes. F.&F.-Cons. Rose Food 8-8-8: A special blend of organic and inorganic material formulated to supply all of the necessary plant food nutrients for the optimum growth of roses. Contains Du Pont Uramite Fertilizer Com pound. USE: One application yearly provides bal anced plant feeding for the full growing season. CONTAINERS: 5-lb. boxes. F.&F.-Cons. Soluble Plant Food: High strength (19-22-16) fast acting plant food for gardens, lawns and house plants. Readily soluble in water; feeds through leaves or roots. USE: As a foliage spray, transplanting solution, root feeding, grass feeding. CONTAINERS: 2-lb. bags. F.&F.-Cons. Spray Adjuvant Spreader-Sticker: A liquid wetting and sticking agent for use in insecticide, fungicide and weed-killing sprays. CONTAINERS: 1-fl. oz. cans. F.&F.-Cons. Turf Foods Turf Food 20-10-10: A long-lasting, non-burning, completely balanced fertilizer. 60% of the nitrogen is derived from Uramite. It contains guaranteed 40% primary lawn nutrients. USE: Designed for lawns. One bag will treat 5,000 sq. ft. of lawn. CONTAINERS: 22-lb. bags. F.&F.-Cons. Turf Food with Weed Killer: Turf food 20-10-10 with 2, 4-D weed killer. USE: It is especially formulated to feed lawns for a longer period of time and at the same time control broadleaf weeds, such as plantain, dandelion, wild onion, buttercups and chickweed. One bag will treat 5,000 sq. ft. of lawn. CONTAINERS: 22-lb. bags. F.&F.-Cons. Weed and Brush Killers Animate Weed and Brush Killer: A yellow, crystal line, water-soluble solid containing 80% ammonium sulfamate. USE: For the nonselective kill of undesirable plant growth; outstanding control for poison ivy, * Denotes a Registered Trademark of the Diamond Alkali Co. poison oak, poison sumac. Very useful in eradicating vegetation in driveways, walks, tennis courts, etc. Effective for killing brush and certain trees; prevents sprouting of tree stumps. CONTAINERS: 2- and 6-lb. bags. F.&F.-Cons. Crabgrass Killer: Contains AMA (amine methyl arsonates), a new highly effective crabgrass control. Rapid acting and effective against seedling or mature crabgrass. 16-oz. covers up to 2,000 sq. ft. CON TAINERS: 16- and 32-oz. bottles. F.&F.-Cons. Crabgrass Killer: Contains DSMA (disodium methyl- orsonate hexahydrate), a "highly effective crabgrass control. USE: Apply to lawns during June or July before the crabgrass goes to seed. One bag (13-lb.) covers 5,000 sq. ft. of lawn. CONTAINERS: 13-lb. bags. F.&F.-Cons. Lawn Weed Killer: Nonvolatile, 2,4-D amine selective weed killer for application os a water spray. USE: For killing broadleaf lawn weeds such as dandelion and plantain; also effective against wild onion and certain woody plants such as Japanese honeysuckle and poison ivy. CONTAINERS: 8-fl. oz. cans. F.&F.-Cons. Lawn Weed Killer No. 2: More concentrated formu lation of 2,4-D amine than above; particularly useful for those having larger than average turf areas to maintain. One-quart size treats 21,000 sq. ft., about 'h acre. USE: For killing most broadleaf lawn weeds and many woody plants. CONTAINERS: 16-oz. and 1-qt. cans. F.&F.-Cons. Oust Crabgrass Preventer D: A pre-emergence crabgrass controller containing "Dacthal."* USE: Ap ply to lawns only once in the spring to stop crabgrass before it starts. One bag will treat 2,500 sq. ft. of lawn. CONTAINERS: 12-lb. bags. F.&F.-Cons. Miscellaneous Garden Sprayer: For attachment to any garden hose. Designed for all liquid sprays and wettable powders. Nozzle provides a fine, wide spray-mist suitable for spraying flowers, shrubs and vegetables. F.&F.-Cons. Lawn Sprayer: For attachment to any garden hose. Designed for all liquid sprays and wettable powders. Nozzle provides a coarse spray up to 30 feet for spraying lawns, shrubs and trees. F.&F.-Cons. Triple Sprayer: For attachment to garden hose. Sprayer features 3 interchangeable nozzles designed to handle all liquid and wettable powder garden chemicals. Has handy cut-off knob and antisiphon protection. F.&F.-Cons. LEAD AZIDE--PbN6: White to buff-colored crystal solid when dry. In dry state is a highly sensitive primary 98 DUP210011243 LEAD-LOROL LEAD AZIDE--PbN6 (Cont.) detonator. Must be kept wet with water or an ethyl alcohol and water mixture until used. USE: In manu facture of detonators. CONTAINERS: 150-lb. steel drums. Explo.-C.P.S. LEAD SPJTTER FUSE LIGHTER: See Explosives, Blasting Accessories and Supplies, page 60. LEADER STOCK: See Photographic Products, page 120. LEADING WIRE: See Explosives, Blasting Accessories and Supplies, page 60. LEATHER CHEMICALS: See Alkanol, page 6; Avitone, page 21; Duponol, page 52; Merpentine, page 101; Merpol, page 101; MethacrolTM, page 102. LEATHER PROCESSING AGENTS: See Acids, Formic, Hydrochloric and Hydroxyacetic, pages 3 to 4; Alumi num Sulfate, page 7; Ammonium Chloride, page 11; Dyes, page 53; Formaldehyde Solution, page 85; G-942TM Tanning Agent, page 90; Pigment Colors, page 124; Resins (Not Molding), Elvacet and Lucite, pages 134 to 136; Titanium Dioxide Pigments, page 153. LECTON ACRYLIC RESIN COATED FABRICS AND LAMINATES: See Finishes, Industrial, Synthetic Resin Coated Fabrics and Laminates, page 76. LECTON ACRYLIC RESIN WIRE ENAMELS: See Finishes, Industrial, Wire Enamels, page 76. LEDCORE DELAY ASSEMBLIES: See Explosives, Blasting Accessories and Supplies, page 60. LEUCO-l,4-DIAMINOANTHRAQUINONE: Sold as 1,4- Diamino-2,3-dihydroanthraquinone Technical, c Chemical Intermediate. Orchem D. & C. LEUCO - 1,4-DIMETHYLDIAMINOANTHRAQUINONE: Sold as 2,3-Dihydro-l ,4-bis(methylamino)anthrcquinone Technical, a Chemical Intermediate. Orchem D. & C. LEUCOSOL DYES: See Dyes, page 54. LIDO COMBS: See Combs and Brushes, page 44. LIGHTERS, FUSE: See Explosives, Blasting Accessories and Supplies, page 60. UNO-WRIT PHOTORECORDING PAPER: See Photo graphic Products, page 118. LINURQN: See Weed and Brush Killers, LoroxTM, page 162. LIQUID BRIGHT GOLDS: See Ceramic Products, page 27. LIQUID BRIGHT PALLADIUMS: See Ceramic Products, page 27. i/THOTM T PHOTOGRAPHIC PAPER: See Photo graphic Products, page 118. LITHOL RUBINE PIGMENTS: See Pigment Colors, page 124. LITHOSOL PIGMENTS, DYES, ACIDS, BASES: See Dyes, page 54. LOGGERS POWDERS: See Explosives, Dynamites, page 63. LOROL FATTY ALCOHOLS: A group of straight chain (normal)even-numbered-carbon alcohols ranging from C-8 (octyl) to C-18 (stearyl). Lorol 5 Fatty Alcohol Technical: Colorless viscous liquid; Sp. Gr. (25/25C.) 0.832-0.836; mixture of straight chain (normal) even-numbered-carbon alco hols (C-10 to C-18) with lauryl alcohol predominating. USE: Intermediate in manufacture of detergents, lubricating oil additives, quaternary ammonium com pounds, mercaptans and textile finishing agents. CONTAINERS: 55-gal. drums, tank trucks and tank cars. !nd.&Bio.-lnd. Lorol 7 Fatty Alcohol Technical: Colorless liquid; Sp. Gr. (25/25 "C.) 0.832-0.836. Similar to Lorol 5 except that it contains a higher percentage of stearyl alcohol. USE: Intermediate in manufacture of lubricat ing oil additives. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-Ind. Lord 9 Fatty Alcohol Technical: Colorless liquid containing about 70% lauryl alcohol; Sp. Gr. (25/ 25C.) 0.832-0.835. USE: Manufacture of lauryl chloride and its derivatives and amine oxide type de tergents. CONTAINERS: 55-gal. drums, tank trucks and tank cars. ind.&Bio.-ind. Lorol 11 Fatty Alcohol Technical: Colorless liquid contaning about 80% lauryl and 20% myristyl alco hol; Sp. Gr. (25/25C.) 0.832-0.836. USE: Manu facture of lauryl chloride and its derivatives and amine oxide type detergents. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-ind. Lorol 20 Fatty Alcohol Technical-- CH3(CH2)6 CH2OH: Colorless liquid; B. P. (pure) 195C. ; Sp. Gr. (25/25C.) 0.823-0.826. Essentially normal octyl alcohol. USE: Antifoam agent, inter mediate in manufacture of plasticizers, lubricating oil additives and perfumes. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-ind. 99 DUP210011244 l o r o l -l u d o x LOROL FATTY ALCOHOLS (Cont.) LoroI 22 Fatty Alcohol Technical- CH3(CH2)8 CHjOH: Colorless liquid; B. P. (pure) 23rc.; Sp. Gr. (25/25 "C.) 0.828-0.832. Essentially normal decyl alcohol. USE: Antifoam agent, inter mediate in manufacture of quaternary ammonium compounds, lubricating oil additives, perfumes and plasticizers. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-lnd. LUCITE ACRYLIC RESINS (NOT MOLDING): See Resins (Not Molding), page 136. LUCITE ACRYLIC SIRUP: See Plastics, page 126. LUCITE ACRYLIC WALL AND CEILING PAINT: See Finishes, Trade Sales (Consumer Products), page 80. LUDOX COLLOIDAL SILICA: Lorol 24 Cetyl Alcohol--National Formulary Grade--CH3(CH2)14CH2OH: White flakes; M. P. (pure) 49.6C. Cetyl alcohol meeting the requirements of the National Formulary VIII. USE: Emulsifying and softening agent in cosmetics, salves and ointments. CONTAINERS: 125-lb. fiber drums, tank trucks and tank cars. Ind.&Bio.-lnd. Lord 28 Industrial Fatty AlcoholCH3(CH2) I6 CHj OH: White flakes; M. P. (pure) 58.0C. Technical grade stearyi alcohol. USE: Mold lubricant, intermediate in manufacture of lubricating oil additives, quaternary ammonium compounds and textile finishing agents. CONTAINERS: 50-lb. paper bags, tank trucks and tank cars. Ind.&Bio.-lnd. Lord 28 Stearyi Alcohol--U. S. P. Grade-- CH3(CH2) 16 CH2OH: White flakes; M. P. (pure) 58.0C. Stearyi alcohol meeting requirements of U. S. P. USE: Ingredient in lipsticks, cosmetic creams, lotions, ointments and salves. CONTAINERS: 50-lb. fiber drums. Ind.&Bio.-lnd. LOROXTM LINURON WEED KILLER: See Weed and Brush Killers, page 162. Ludox AM Colloidal Silica--Technical: An aque ous colloidal sol of alumina modified silica particles containing approximately 30% solids. pH at 25C. is 8.9-9.1. The product is characterized by being stable toward gelation over a broad pH range, including the range 4-7, where other sols have limited stability. This property allows the product to be used in formula tions in conjunction with a wide variety of other ma terials. USE: Similar to other Ludox products, particularly in polymer-base floor polishes, waterbased paints, adhesives and paper coatings for detackifying, antiblocking, insolubilizing, and reinforcing polymer films from neutral or acidic dispersions. CON TAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-lnd. Ludox AS Colloidal Silica--Technical: An aqueous colloidal silica sol stabilized with ammonia. The sol contains 30% solids and has a pH of approximately 9.6. USE: Ceramic, refractory applications and others where low alkali bonding agent is required. Excellent source of high purity silica for gels used as catalyst supports. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-lnd. LOW NOISE LEVEL DELAY INITIATION SYSTEM: See Explosives, Blasting Accessories and Supplies, page 60. Ludox HS Colloidal Silica--Technical: An aqueous colloidal sol containing approximately 30% Si02. Ratio, wt,, Na20:Si02, 1:95; pH at 25C. 9.65-10.15; LUBRICANT ASSISTANT: See Petroleum Chemicals, Grease and Lubricating Oil Additives, Ortholeum 162, page 114. F. P. 32F. (0C.). USE: As reactant to form synthetic silicates or gels for catalyst supports; compounding of latex foams and films to improve modulus and effect rubber savings; modifying latex adhesives for detack- LUBRICANTS: See Automotive Specialties 7 Products, page 18. ifying and improved bond strengths; for increased hardness and slip resistance in emulsion floor waxes; improved water and heat resistance of adhesive coat LUBRICANTS, FIBER: See Avitex, page 21; Avifone, ings and fibrous structures; for high temperature re It page 21; Duponol, page 52; Ze/ec, page 164. lease coatings for molten metals; for antisoil treatment of pile fabrics and miscellaneous substrates; for fric- LUCERNE COMBS; See Combs and Brushes, page 44. tionizing textiles, glass, metals and paper; binder for LUCITE ACRYLIC LACQUERS: See Finishes, Automo inorganic fibers and pigments, precoating photo sensitized paper for color contrast. CONTAINERS: 55- tive, page 69; Finishes, Refinish, page 72. gal. drums, tank trucks and tank cars. LUCITE ACRYLIC HOUSE PAINT: See Finishes, Trade Sales (Consumer Products), page 81. Ind.&Bio.-lnd. Ludox LS Colloidal Silica-Technical: An aqueous colloidal sol containing approximately 30% Si02. LUCITE ACRYLIC RESINS (MOLDING): See Plastics, Ratio, wt., Na20:Si02, 1:285; pH at 25C. 8.2-8.7; page 126. F. P. 32F. (0C.). USE: See Ludox HS Colloidal 100 DUP210011245 LUDOX-MERPOL LUDOX COLLOIDOL SILICA (Cont.) Silica, above. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. Ludox SM Colloidal Silica-Technical: An aqueous colloidal sol containing approximately 15% Si02 char acterized by extremely small particle size averaging only 7 millimicrons. Ratio, wt., Na20:Si02, 1:159; pH at 25C. 8.1; F. P. 32F. (0C.). USE: Reactant for synthetic silicates; binder for inorganic fibrous ma terials; antisoil applications to smooth surfaces; paper coatings to improve abrasion resistance, printability and other properties; latex adhesive compositions for improved adhesion, etc. CONTAINERS: 55-gal. drums. Ind.&Bio.-Ind. LUMINESCENT CHEMICAL PRODUCTS: Lu min e s c e n t FOR: Ch e mic a l s (Ph o s p h o r s ) Ar e Av a il a b l e Focusing Plates for Ultraviolet Microscopy: A green fluorescing zinc silicate which responds to 2537 A ultraviolet light, coated on glass. Screens for Electron Microscopes Miscellaneous Uses: Also prepared to supply miscel laneous phosphors to meet individual requirements. Photo Prod. LUMP COAL PERMISSIBLE EXPLOSIVES: See Explo sives, Permissible Explosives, page 63. LUSTER COLORS: See Ceramic Products, page 27. LUXOL DYES: See Dyes, page 54. LYCRA SPANDEX FIBER: See Fibers, Synthetic, page 65. M MACHINERY AND EQUIPMENT: See Surplus Ma terials, page 146. MACHINES, BLASTING: See Explosives, Blasting Acces sories and Supplies, page 59. MAGAZINES, PORTABLE: See Explosives, Blasting Accessories and Supplies, page 60. MALATHION: See Lawn and Garden Products, Insecti cides, Aphid and Mite Spray and Smite Garden In secticide, page 97. MANEB: See Fungicides, Agricultural, Manzate, page 89. MANGANESE ETHYLENEBISDITHIO-CARBAMATE (MANEB): See Fungicides, Manzate, page 89. MANZATE MANEB FUNGICIDE: See Fungicides, Agricultural, page 89. MARINE FINISHES: See Finishes, Trade Sales (Con sumer Products), Marine Finishes, page 81. MARLATE METHOXYCHLOR INSECTICIDE: See Insecticides, page 94. MASKING page 72. COMPOUND: See Finishes, Refmish, MASTER FUSE LIGHTERS: See Explosives, Blasting Accessories and Supplies, page 60. MATCHMASTER MODEL 5J3T RIFLE: See Arms, page 17. MBT (2-MERCAPTOBENZOTHIAZOLE): See Accelera tors for Natural and Synthetic Rubber, page 1. MBT--OIL FREE: 2-Mercaptobenzothiazole. Used as a corrosion inhibitor. Orchem D. & C. MBTS (2-BENZOTHIAZOLYL DISULFIDE): See Ac celerators for Natural and Synthetic Rubber, page 7. MCB (MONOCHLOROBENZENE): Sold as Chloro benzene Technical, a Chemical Intermediate. Orchem D. & C. MDF: See Mild Detonating Fuse, page 104. MEDICAL X-RAY FILM: See Radiographic Products, page 133. MEDICINAL NITROGLYCERIN: See Nitroglycerin, Beta Lactose Mixture, page 107. 2-MERCAPTOBENZOTHIAZOLE: See Accelerators for Natural and Synthetic Rubber, MBT, page I. 2-MERCAPTOIMIDAZOLINE: See Accelerators for Natural and Synthetic Rubber, NA-22, page 1. MERCURIAL SEED DISINFECTANT: See Seed Treat ments, Ceresan, page 139. MERPENTINE SURFACE ACTIVE AGENT: A com pounded anionic wetting, penetrating and leveling agent of particular interest in the leather and textile fields. Orchem D. & C. MERPOL SURFACE ACTIVE AGENTS: Merpol B, C and F Surface Active Agents: Higher alcohol sulfates fortified with solvents which are effective as wetting, scouring, penetrating and emulsi fying agents. Orchem D. & C. Merpol DA Surface Active Agent: Nonionic liquid surfactant which exhibits excellent leveling properties 101 DUP210011246 S5 MERPOL-METH ACRYLIC MERPOL SURFACE ACTIVE AGENTS (Cont.) D14 Alloy (Nb-5Zr) FORMS: Ingots and millshapes. on disperse, acid, premetalized and cationic dyes on synthetic fibers and wool. Also an effective paper pulping assistant. Orchem D. & C. D31 Alloy (Nb-lOTi-lOMoO.lC) FORMS: Ingots and millshapes. D36 Alloy (Nb-10Ti-5Zr) FORMS: Ingots and millshapes. D35 Alloy (Nb-10W-4Zr-.08-.lC) FORMS: Ingots and Merpol ON Surface Active Agent: An amphoteric millshapes. D40 Alloy (Nb-15W-5Mo-lZr) FORMS: Ingots and mill- surfactant particularly effective in the stripping of dyes from Dacron polyester fiber. Orchem D. & C. shapes. i USE: Strength at elevated temperatures, oxidation resistance, high melting point or low thermal neutron i! METAL CONDITIONER: See Finishes, Refinish, page 72. cross section. Pigments METAL DEACTIVATORS: See Petroleum Chemicals, Metal Deactivaiors, Petroleum, page 114. METAL DEGREASING COMPOUNDS: See Freon Products, page 87; Perchlorethylene, page 7 70; Trichlorethylene, page 158. T-D Nickel: A dispersion-strengthened alloy contain ing 98% nickel and 2% thoria, for applications where superior strength, stability and oxidation resistance are required at elevated temperatures. Pigments METAL SCRAP: See Surplus Materials, page 146. METAL DESCALING AND PICKLING AGENTS: See Acids, DucJean, Hydrochloric, Nitric, Sulfamic and Sulfuric, pages 3 to 5; Nogas Metal Pickling Agent, page 108. METAL FINISHES AND PRIMERS: See Finishes, Trade Sales (Consumer Products), page 81. METAL POLISH: See Automotive Specialties 7 Products, page 20. METAL PROCESSING ADDITIVES: See Alkanol, page 6; Duponol, page 52; Petrowef, page 7 75; Zelec, page 164. METAL PRODUCTS: Toll Conversion Services: The Du Pont Metals Center in Baltimore, Maryland offers a range of toll conver sion services for hard-to-work metals. Designed solely for full-scale production of refractory alloys, the facility is uniquely equipped for forging, extrusion, rolling and high temperature vacuum heat treating. Pigments Coiumbium (NB) and Columbium Alloys: Pigments Metal Products produces columbium and columbiumbase alloys for various applications which require strength at elevated temperatures and other proper ties such as oxidation resistance, high melting point, or low thermal neutron cross section. Av a il ab l e Gr ad es a n d Al l o y s : D3-Granules--A high purity grade of columbium used as a base for alloys. FORMS: Powder, granules or compacted stick electrodes. DIO--Unalloyed columbium metal. FORMS: Ingots and millshapes. D11 Alloy (Nb-7Zr) FORMS: Ingots and millshapes. D12 Alloy (Nb-5Ti) FORMS: Ingots and millshapes. METAL SUPPRESSOR: See Petroleum Chemicals, Metal Deactivators, Petroleum, page 114. METALLURGICAL ADDITIVE: See Skamex Mefa/lurgical Additive, page 140. METANILIC ACID, SODIUM SALT: Sold as Sodium metanilate Technical, a Chemical Intermediate. Orchem D. & C. METHACROLTM RESIN DISPERSIONS: For Leather--A series of four anionic methacrylate dispersions designed especially for application to leather and leather prod ucts. In this group are MethacrolTM RB, MethacrolTM LB, MethacrolTM LBM and MethacrolTM LBP. These are listed in order of increasing softness of finish. Orchem D. & C. METHACROLTM RESIN DISPERSIONS: For Textiles--A series of acrylic resins for use as antisnag and bodying agents for nylon hosiery. Orchem D. & C. METHACRYLATE MONOMERS-CH2C(CH3)COOR (Where R is Hydrogen, Methyl, Ethyl, n-Butyi or Isobutyl): Water-white, mobile, volatile liquids contain ing a small amount of polymerization inhibitor. USE: Primarily in manufacture of acrylic polymers for paints and coatings and as chemical intermediates. CON TAINERS: 5-gal. cans, 55-gal. drums, 8,000-gal. tank cars and tank trucks. (Also see Plastics, page 126.) Electrochem. METHACRYLATE POLYMERS: See Resins (Not Molding), Lucite, page 136. METHACRYLATE RESINS: See Resins (Not Molding), Lucite, page 136; Plastics, Lucite, page 126. METHACRYLATO CHROMIC CHLORIDE: See VoIan Methacrylato Chromic Chloride, page 161. METHACRYLIC ACID: See Methacrylate Monomers, page 102. 102 DUP210011247 METHANE-METHYL METHANE BASE: Sold as p,p'-Methylenebis(N,N- dimethylaniline) Technical, a Chemical Intermediate. Orchem D. & C. METHANOIC ACID: See Adds, Formic Acid,page 3. METHANOL--CH3OH: Colorless flammable liquid; B. P. 64.7C.; F. P. -97C.; Sp. Gr. (20/4C.) 0.7913. USE: Ingredient of automotive and other antifreezes; in manu facture of formaldehyde; in manufacture of many methyl esters, methyi haiides and methyi ethers; injection fluid for increasing power and octane rating of aviation gasoline; as a constituent of many solvents for varied purposes. CONTAINERS: Tank cars and tank trucks. Ind.&Bio.-Ind. METHANOL, COMMERCIAL: See Antifreeze Products, page 15. METHANOL FORMALDEHYDE 33-55: Clear, colorless reaction product containing approx. 33% by weight methanol, 55% formaldehyde and 12% water. Weight per gal. 8.9. USE: In formaldehyde reactions where low water is preferred and the reaction medium is methanol; in manufacture of methylated urea and methylated melamine resins for use in paper and textile treatment, coatings and laminating adhesives. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-Ind. METHANOL FORMALDEHYDE 43.5-46.5: Clear, colorless reaction product containing 43.5% by weight methanol, 46.5% formaldehyde and 10% water. Weight per gal. 8.9. Us e: In formaldehyde reactions where low water is preferred and the reaction medium is methanol; in manufacture of methylated urea and methylated melamine resins for use in paper and textile treatment, coatings and laminating adhesives. CON TAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-Ind. METHIONINE HYDROXY ANALOGUE CALCIUM: See Nutrition and Therapy Products, Hydan, page 108. METHOX YAMINO AZOBENZENE SODIUM SUL FONATE: Sold as m-(4-Amino-3-methoxyphenylazo) benzenesulfonic acid Technical, a Chemical Inter mediate. Orchem D. & C. o-METHOXYANILINE: Sold as o-Anisidine Technical, a Chemical Intermediate. Orchem D. & C. p-METHOXYANILINE: Sold as p-Anisidine Technical, a Chemical Intermediate. Orchem D. & C. METHOXYCHLOR INSECTICIDES: See Insecticides, Mar/afe, page 94. 4-METHOXYMETANILIC ACID TECHNICAL: 3-Amino- 4-Methoxybenzene sulfonic acid. Paste form; a Chemical Intermediate. Orchem D. & C. 4- METHOXYMETANILIC ACID UREA: Sold as N,N'- Carbonylbis(4-methoxymetanilic acid), disodium salt Technical, a Chemical Intermediate. Orchem D. & C. METHOXY OMEGA SULFONIC ACID: Sold as o- Anisidinomethanesulfonic acid, sodium salt Technical, a Chemical Intermediate. Orchem D. & C. METHYL ALCOHOL: See Methanol, page 103. 1 -METHYLAMINOANTHRAQUINONE TECHNICAL: Crystalline powder form; a Chemical Intermediate. Orchem D. & C. N-METHYLANILINETECHNICAL: Liquid form,- a Chemical Intermediate. Orchem D. & C. 3-(N-METHYLANILINO) PROPIONITRILE TECHNICAL: Cyanoethyl methyl aniline. Liquid form,- a Chemical Intermediate. Orchem D. & C. 5- METHYL-o-ANISIDINE (NH2 =1): Sold as Cresi dine Technical, a Chemical Intermediate. Orchem D. & C. l-(3-METHYL-2-ANTHRAQUINONYLAMINO)-5-(7OXO- 7H - BENZ( DE) ANTHRACEN - 3 - YLAMINO) ANTHRAQUINONE TECHNICAL: Anthrimide for Gray R. Solid form; a Chemical Intermediate. Orchem D. & C. METHYLATING AGENTS: See Dimethyl Sulfate, page 49; Methyl Chloride, below. METHYL CHLORIDE (CHLOROMETHANE, MONO- CHLOROMETHANE) --CHSCI: At ordinary temperatures a colorless gas with ethereal odor; slightly soluble in water; soluble in most organic solvents; stable; moder ately flammable,- high latent heat and other physical properties desirable in refrigerants. Available in re frigeration grade and technical grade. Boiling range (95%) -12.3 to -- 10.5F. (-24.6 to -23.6C.). Weight per gal. 7.68 lb. at 20C. Electrochem. Refrigeration Grade (Artie Methyl Chloride): USE: As a refrigerant; as a fluid for thermometric and thermostatic equipment. Co n t ain e r s : 100-lb. cyl inders and multi-unit tank cars of 15 tanks (1,300 lb.) each. Technical Grade: USE: As a methylating agent in organic synthesis; as a low temperature reaction sol vent; as a solvent and propellant in aerosols. CON TAINERS: 100-lb. cylinders, multi-unit tank cars of 15 tanks (1,300 ib.) each and single-unit tank cars. METHYL FORMATE-TECHNICAL (97%)--HCOOCH3: Colorless, mobile, volatile liquid; B. P. 31.8C. USE: As an ingredient in fumigants; as a solvent; in manufacture of formates, drugs and organic chemicals. CONTAINERS: 55-gal. drums and tank cars. Ind.&Bio.-Ind. 103 DUP210011248 METHYL-MISCELLANEOUS METHYL METHACRYLATE: See Methacrylate Mono mers, page 102; Plastics, page 126. METHYL METHACRYLATE COPOLYMERS: See Resins (Not Molding), Lucite 2013 and 6013, page 136. METHYL METHACRYLATE POLYMERS: See Resins (Not Molding), Lucite 2008, 2009, 2010, 2041, 6010, 6011 and 6012, page 136; Plastics, Lucite, page 126. METHYL SULFATE: See Dimethyl Sulfate, page 49. 4-METHYL-2-NITROANISOLE TECHNICAL: Nitrocresol methyl ether. Cast solid or liquid form; a Chemical Intermediate. Orchem D. & C. 2-METHYL- 1-NITROANTHRAQUINONE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. p-(3-METHYL-5-OXO - 2 - PYRAZOLIN - 1 - YL)BEN- ZENESULFONIC ACID: Sold as l-(p-Sulfophenyl)-3- methyl-5-pyrazolone Dry and Paste Technical, a Chemical Intermediate. Orchem D. & C. NICAL: Methylene Base; Methane Base. Granular solid form; a Chemical Intermediate. Orchem D. & C. METHYLENE DICHLORIDE: See Methylene Chloride, page 104. N-METHYLGLUCAMINE TECHNICAL: Crystalline pow der form; a Chemical Intermediate. Orchem D. & C. 2-METHYLQUINOLINE: Sold asQuinaldine C Technical, a Chemical Intermediate. Orchem D. & C. MICHLER'S HYDROL: Sold as 4,4'-Bis(dimethylamino)- benzhydrol Technical, a Chemical Intermediate. Orchem D. & C. MICHLER'S KETONE: Sold as 4,4'-Bis(dimethylamino)- benzophenone Technical, a Chemical Intermediate. Orchem D. & C. MIGHTY MITETM STUD DRIVER: See Tools, Powder Actuated, page 157. N-METHYLCYCLOHEXYLAMINE TECHNICAL: Liquid MILD DETONATING FUSE (MDF): A small diameter, form; a Chemical Intermediate. Orchem D. & C. flexible metal tube containing high explosive core load 4,4 METHYLENE-BIS(2-CHLOROANILINE): See Ac ings ranging from 1 to 20 grains per foot. The material, which has detonation velocities in excess of 20,000 feet celerators for Natural and Synthetic Rubber, MocaTM, per second, propagates a detonation from point to L page 1. point without damage to adjacent equipment. The material has utility for missile applications such as stage METHYLENE BIS (4 PHENYL ISOCYANATE): See separation. CONTAINERS: Various lengths on spools or | Hylene Organic Isocyanates, page 93. as custom assemblies having special electrical initiators METHYLENE CHLORIDE (AEROSOL GRADE): See and primers attached. Explo.-C.P.S. j; Freon--Other Products, page 88. MILITARY SPECIALTIES: Custom assemblies using pyro f technic devices designed for various end uses. Present J METHYLENE CHLORIDE(DICHLOROMETHANE, product line includes hole-cutters, explosive releases, ; METHYLENE DICHLORIDE) --CH2CI2: A colorless liquid shaped charges, special caps, squibs, detonators and with faintly ethereal odor; practically nonflammable and metal or plastic sheathed explosive cords. nonexplosive. Available in refrigeration grade for both Explo.-C.P.S. solvent and refrigerant uses. Boiling range 103.1- 104.5F. (39.5-40.3C.). Weight per gal. 11.07 lb. MILL SUPPLIES: See Surplus Materials, page 146. at20C. USE: As a refrigerant in centrifugal compres MILLING BLUE BL BASE: Sold as 1,4-Bis(2,4,6-triethyl- sors; for chemical synthesis; as a low temperature heat anilino)anthraquinone Technical, a Chemical Inter | transfer liquid; as a paint remover; as a cold cleaner; mediate. Orchem D. & C. ; as a solvent for animal and vegetable oil extraction; : as a solvent in aerosols; for dewaxing of lubricating MINERAL ADHESIVE SOLUTION: See Adhesives, r oils; and as a solvent for cellulose acetates. CONTAINERS: page 6. : 55-gal. (600-lb.) drums, tank cars and tank trucks. (See also Freon--Other Products, page 00.) Electrochem. MIRBANE OIL: See Nitrobenzene, page 107. ! N-METHYLENEANILINE: Sold as Formaniline Technical, a Chemical Intermediate. Orchem D. & C. MISCELLANEOUS CHEMICALS FOR NATURAL AND SYNTHETIC RUBBER: i METHYLENE BASE: Sold as p,p'-Methylenebis(N,N- dimethylaniline) Technical, a Chemical Intermediate. ELA: Mixture of phosphate esters. Light amber liquid; Orchem D. & C. Sp. Gr. 0.98. USE: A lubricant for unvulcanized natural and synthetic rubber compositions. CON p,p'-METHYLENEBIS(N,N-DIMETHYLANILINE) TECH TAINERS: 425-lb. drums. Elastomers DUP210011249 MISCELLANEOUS-NAPHTHANIL MISCELLANEOUS CHEMICALS FOR NATURAL AND SYNTHETIC RUBBER (Cont.) IML-1: A creamy-white nondusting powder of sodium alkyl sulfates. Sp. Gr. 1.16. USE: An internal lubricant which greatly improves the flow characteristics of highly loaded elastomer compounds, yet does not ap preciably reduce tensile strength. CONTAINERS: 150-lb. drums. Elastomers MIXED ACID, TECHNICAL: See Acids, Mixed Acid, page 4. MIXED DIXYLYL DISULFIDES: See Chemical Peptizers for Natural and Synthetic Rubber, RR 10, page 39. M.O.A. MOTOR OIL ADDITIVE: See Automotive Specialties 7 Products, page 19. MOCATM CURING AGENT: See Accelerators for Natural and Synthetic Rubber, page 1. MOLD LUBRICANTS: See Vydax, page 767; Zelec,, page 164; Wetting Agents for Natural and Synthetic Rubber, page 163. MOLYBDATE ORANGE PIGMENTS: See Pigment Colors, page 124. MONASTRAL PIGMENTS: See Dyes, page 54; Pig ment Colors, page 124. MONOBEL PERMISSIBLE EXPLOSIVES: See Explo sives, Permissible Explosives, page 63. MONOCHLOROMETHANE: See Methyl Chloride, page 103. MONOFILAMENTS: See Plastics, Dymefrol, Herox, Stren and Tynex, pages 125 to 128. MONOMERS: See Methacrylate Monomers, page 102; Plastics, Methyl Methacrylate Monomers, page 126; 2Diethylaminoethyl Methacrylate MS Technical, page 48. MONOMETHYLAMINE-ANHYDROUS AND AQUEOUS SOLUTIONS--CH3NH2: Anhydrous--color less gas, clear and water-white when liquefied. USE: In the manufacture of pharmaceutical intermediates for the xanthine alkaloids, theophylline, caffeine, the sym pathomimetic drugs such as ephedrine and the analgesic meperidine; in manufacture of surface active agents; photographic developers; dyes; in manufacture of soil fumigants, fungicides and insecticides for agriculture. CONTAINERS: Anhydrous--100-lb. cylinders, 600-lb. cyl inders, tank cars and tank trucks. Aqueous Solutions-- 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. MONOMETHYLAMINE-ANHYDROUS TECHNICAL -- CH-NH,: For use in manufacture and formulation of pesticides. CONTAINERS: 100-lb. cylinders, tank cars and tank trucks. Ind.&Bio.-Bio. 40% MONOMETHYLAMINE SOLUTION--CH3NH2: For use in manufacture and formulation of pesticides. CONTAINERS: 55-gal. drums (nonreturnable), tank cars and tank trucks. Ind.&Bio.-Bio. MONOPERSULFATE COMPOUND: See Oxone Monopersu/fafe Compound, page 710. MONOXIDE, page 142. SOD/UM : See Sodium Monoxide, MOTION PICTURE FILM: See Photographic Products, page 119. MOTOR ENAMEL: See Finishes, Refinish, page 72. MOTOR MIX: See Petroleum Chemicals, Antiknock Compounds, page 111. MOTOR OIL ADDITIVE: See Automotive Specialties 7 Products, M.O.A., page 19. MURIATE OF AMMONIA; See Ammonium Chloride, page 7 7. MURIATIC ACID: See Acids, Hydrochloric Acid, Tech nical, page 4. MYLAR POLYESTER FILM: See Film, Mylar Polyester, page 66. N NA-22 (MERCAPTOIMIDAZOLINE): See Accelerators for Natural and Synthetic Rubber, page 1. NABAM: See Fungicides, Parzate Liquid, page 89. NAIL BRUSHES: See Toiletries, page 153. NALAN DURABLE WATER REPELLENTS; Lower-cost, durable repellents for textile use where no advertising assistance is needed. Orchem D. & C. 1,5-NAPHTHALENEDISULFONIC ACID, DISODIUM SALT TECHNICAL; Paste form; a Chemical Inter mediate. Orchem D. & C. 2,7-NAPHTHALENEDISULFONIC ACID, DISODIUM SALT TECHNICAL: Paste form; a Chemical Inter mediate. Orchem D. & C. 2-NAPHTHALENETHIOL: See Chemical Peptizers for Natural and Synthetic Rubber, RPA-2 and RPA-6, page 39. NAPHTHANIL BASES AND AZOIC COMPOUNDS: See Dyes, page 54. NAPHTHANIL DIAZO PIGMENTS: See Pigment Colors, page 12\4. NAPHTHANIL DYE BASES: See Dyes, page 54. 105 DUP210011250 NAPHTHASULTAM-NITRO NAPHTHASULTAM: Sold as 4-Amino-l ,3,5-naphtha- lenetrisulfonic acid, 4,5-sultam, trisodium salt Tech nical, a Chemical Intermediate. Orchem D. & C. 2( 1H)-PERI-N APHTHAZOLONE: Sold as Naphthostyril Technical, a Chemical Intermediate. Orchem D. & C. NAPHTHIONIC ACID, SODIUM SALT: Sold as Sodium naphthionate Technical, a Chemical Inter mediate. Orchem D. & C. 0- NAPHTHIONIC ACID TECHNICAL: l-Amino-2- naphthalenesulfonic acid. Powder form; a Chemical Intermediate. Orchem D. & C. ALPHA-NAPHTHOL TECHNICAL: Flake form; a Chem ical Intermediate. Orchem D. & C. 2-NAPHTHOL-6,8-DISULFONIC ACID, DIPOTASSIUM SALT: 5old as G Salt Technical, a Chemical Inter mediate. Orchem D. & C. 1-NAPHTHOL-4-SULFONIC ACID, SODIUM SALT: Sold as Nevile & Winther's Acid Technical, a Chem ical Intermediate. Orchem D. & C. 2- NAPHTHOL-7-SULFONIC ACID, SODIUM SALT: Sold as F Salt Technical, a Chemical Intermediate. Orchem D. & C. NAPHTHOSTYRIL TECHNICAL: 8-Amino-1 -naphthoic lactam; Benz-(c,d)-indol-2(l H)-one; 2(lH)-peri Naphthazolone. Solid form; a Chemical Intermediate. Orchem D. & C. ALPHA-NAPHTHYLAMINE TECHNICAL Flake form; a Chemical Intermediate. Orchem D. & C. NATURAL RUBBER ACCELERATORS: See Accelera tors for Natural and Synthetic Rubber, page 1. NATURAL RUBBER ANTIOXIDANTS: See Antioxidants for Natural and Synthetic Rubber, page 15. NATURAL RUBBER CHEMICALS: See Miscellaneous Chemicals for Natural and Synthetic Rubber, page 104. NATURAL RUBBER PEPTIZERS: See Chemical Peptizers for Natural and Synthetic Rubber, page 39. NATURAL RUBBER PROTECTIVE AGENTS: See Pro tective Agents for Natural and Synthetic Rubber, page 131. NBC SUN CRACKING INHIBITOR: See Protective Agents for Natural and Synthetic Rubber, page 131. NEOPRENE: See Synthetic Rubber, page 147. NEOPRENE ACCELERATORS: See Accelerators for Natural and Synthetic Rubber, page 1. NEOPRENE LATEX: See Synthetic Rubber, page 149. NEOZONE RUBBER ANTIOXIDANT: See Antioxi dants for Natural and Synthetic Rubber, page 15; Poly merization Chemicals for Synthetic Rubber, page 129. NEVILE & WINTHER'S ACID TECHNICAL: 1-Naph- thol-4-sulfonic acid, sodium salt; 1,4-Hydroxy Acid. Paste form; a Chemical Intermediate. Orchem D. & C. NEW CAR WAX: See Automotive Specialties 7 Prod ucts, page 19. NFLTM WOOD STAINS: See Finishes, Industrial, page 76. NICKEL DIBUTYLDITHIOCARBAMATE: See Protective Agents for Natural and Synthetic Rubber, NBC, page 131. NICKEL, T-D: See Metal Products, T-D Nickel, page 102. NIUTE NITRO CARBO NITRATE: See Explosives, Blasting Agents, page 61. NIOX AMMONIUM NITRATE: See Ammonium Nitrate U.S.P., page 7 7. NITER CAKE: See Sodium Bisulfate, page 142. NITRAMEX BLASTING AGENT: See Explosives, Blasting Agents, page 61. NITRAMITE BLASTING AGENT: See Explosives, Blasting Agents, page 61. NITRAMON BLASTING AGENT: See Explosives, Blasting Agents, page 61. INITRATES Ammonium: See Ammonium Nitrate, page 17. Cellulose: See Nitrocellulose, page 107. Hydrogen: See Acids, Nitric Acid, page 4. Nitro Carbo: See Explosives, Blasting Agents, Nitramife, page 61. Pentaerythrite Tetranitrate (PETN): See Pentaeryfhrife Tetranitrate, page 110. Strontium: See Strontium Nitrate, page 145. NITRIC ACID: See Acids, page 4. NITRITE, SODIUM: See Sodium Nitrite, page 143. 2'-NITRO-p-ACETANISIDIDE TECHNICAL: Paste form,- a Chemical Intermediate. Orchem D. & C. 3-NITRO-4-AMINOANISOLE TECHNICAL (CH30--1): 2-Nitro-p-anisidine (NH2=1). Powder form; a Chemical Intermediate. Orchem D. & C. DUP210011251 NiTRO-NITROGLYCERIN 5- NITRO-2-AM1NOANISOLE TECHNICAL (CH30=1): 4-Nitro-o-anisidine (NH2=1). Powder form; a Chemical Intermediate. Orchem D. & C. 4-NITRO-2-AMINOPHENOL TECHNICAL: 2-Amino 4 nitrophenol. Crystalline paste form; a Chemical Inter mediate. Orchem D. & C. 4-NITRO-2-AMINOTOLUENE TECHNICAL: 5-Nitro-o- toluidine (NH2=1). Powder form; a Chemical Inter- meaiate. Orclierri S. St C. m-NITROANILINE TECHNICAL: Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 4-NITROANILINE-2-SULFONIC ACID TECHNICAL: 2-Amino-5-nitrobenzenesulfonic acid; p-Nitroaniline- o-sulfonic acid (PNAOSA). Crystalline paste form; a Chemical Intermediate. Orchem D. & C. 4- NITRO-o-ANISIDINE (NHS = I): Sold as 5-Nitro-2- aminoanisole Technical (CH30=1), a Chemical Intermediate. Orchem D. & C. 2-NITRO-p-ANISIDINE (NH2=1): Sold as 3-Nitro-4- aminoanisole Technical (CH30=1), a Chemical Intermediate. Orchem D. & C. 0- NITROANISOLE TECHNICAL: Liquid form; a Chem ical Intermediate. Orchem D. & C. p-NITROANISOLE TECHNICAL: Solid form; a Chem ical Intermediate. Orchem D. & C. 1- NITRO-2-ANTHRAQUINONECARBOXYLIC ACID TECHNICAL: Solid form; a Chemical Intermediate. Orchem D. & C. p-NITROBENZOYL J ACID: Sold as 6-(p-Nitro- benzamido)-l-naphtho!-3-sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. p-NITROBENZOYL PAB J ACID: Sold as 6-(p-(pNitrobenzamido)benzamido)-1 - naphthol- 3 - sulfonic acid Technical, a Chemical intermediate. Orchem D. & C. 4-NITRO-4-BIPHENYLCARBOXYLIC ACID, SODIUM SALT TECHNICAL: NPB Salt ical Intermediate. Orchem D. & C. NITRO CARBO NITRATE: See Explosives, Blasting Agents, Nitramite and Nilite, page 67. NITROCELLULOSE--SOLUBLE TYPES: Cellulose nitrate with variable nitrogen content in a wide range of viscosities. Available wet with butyl, ethyl or isopropyl alcohol and water. USE: Excellent film-forming material for use in lacquers and other types of finishes; coating for cellophane, paper, fabrics, component of adhesives. CONTAINERS: 55-gal. capacity returnable metal drums. Explo.-C.P.S. o-NITROCHLOROBENZENE TECHNICAL: 1-Chloro^- nitrobenzene. Cast solid form; a Chemical Inter mediate. Orchem D. & C. o-NITROCHLOROBENZENE-p-SULFONAMIDE: Sold as 4-Chloro-3-nitrobenzenesulfonamide Technical, a Chemical Intermediate. Orchem D. & C. p-NITROCHLOROBENZENE TECHNICAL: l-Chloro-4- nitrobenzene. Flake form; a Chemical Intermediate. Orchem D. & C. 6 - (p - (p - NITROBENZAMIDO)BENZAMIDO) - 1 -N APHTHOL-3-SULFONIC ACID TECHNICAL: p-Nitrobenzoyl PAB J Acid. Paste form; a Chemical Intermediate. Orchem D. & C. p-NITROCHLOROBENZENE-o-SULFONIC ACID: Sold as 2-Chloro-5-nitrobenzenesulfonic acid, sodium salt Technical, a Chemical Intermediate. Orchem D. & C. 6- (p - NITROBENZAMIDO) - 1 - NAPHTHOL - 3 SULFONIC ACID TECHNICAL: p-Nitrobenzoyl J Acid. Paste form; a Chemical Intermediate. Orchem D. & C. NITROBENZENE-C6H5N02: Pale yellow liquid. USE: Intermediate for manufacture of aniline, azobenzene, rubber chemicals and other organic intermediates. CON TAINERS: 55-gal. (500-lb.) metal drums, tank cars and tank trucks. Explo.-C.P.S. 2-NITRO-p-CRESOL TECHNICAL: Cast solid or Liquid form; a Chemical Intermediate. Orchem D. St C. NITROCRESOL METHYL ETHER: Sold as 4-Methyl-2- nitroanisole Technical, a Chemical Intermediate. Orchem D. & C. NITRODIAZO-1,2,4-HYDROXY ACID: Sold as 7 (and 8)-Nitronaphth(l,2)-oxadiazole-5-sulfonic acid Tech nical, a Chemical Intermediate. Orchem D. St C. 5- NITRO-2(3H)-BENZIMIDAZOLONE) TECHNICAL: Crystalline paste form; a Chemical Intermediate. Orchem D. & C. p-NITROBENZOIC ACID TECHNICAL: Crystalline solid form; a Chemical Intermediate. Orchem D. & C. NITROGLYCERIN: See Explosives, Dynamites, page 63. NITROGLYCERIN--BETA LACTOSE MIXTURE-- C3H5(N03) 3: Fine white powder. Available as a trituration of 10% nitroglycerin, 90% beta lactose by weight. USE: Medicinals. CONTAINERS: 10- and 50-lb. polyethylene-lined fiber drums. Explo.-C.P.S. 107 DUP210011252 NITRON APHTHALENE-NUTRITION ALPHA-NITRONAPHTHALENE TECHNICAL: Flake form; a Chemical Intermediate. Orchem D. & C. 7 (AND 8)-NITRONAPHTH( l,2)-OXADIAZOLE-5SULFONIC ACID TECHNICAL: Nitrodiazo-1,2,4- hydroxy acid. Paste form; a Chemical Intermediate. Orchem D. & C. 4'-N!TROOXANILIC ACID TECHNICAL: N-Oxalyl-p- nitroaniline. Powder form; a Chemical Intermediate. Orchem D. & C. p-NITROPHENETOLE TECHNICAL: Solid form; a Chemical Intermediate. Orchem D. & C. o-NITROPHENOL TECHNICAL: Crushed solid form; a Chemical Intermediate. Orchem D. & C. p-NITROPHENOL TECHNICAL: Flake form; a Chem ical Intermediate. Orchem D. & C. p-NITROPHENOL, SODIUM SALT: Sold as p-Nitro sodium phenolate Technical, a Chemical Inter mediate. Orchem D. & C. 4-NITRO-o-PHENYLENEDIAMINE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. 1 - (m - NITROPHENYL) -3 - METHYL- 5 - PYRAZOLONE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. 1 -(m - NITROPHENYL) - 5 -0X0- 2 - PYRAZOUNE - 3 - CARBOXYLIC ACID TECHNICAL Paste form; a Chemical Intermediate. Orchem D. & C. 4-NITROPHTHALIMIDE TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. NITROSAN BLOWING AGENT: Yellow powder com prised of 70% N,N'-dimethyl-N,N'-dinitrosoterephthalamide and 30% white mineral oil. Controlled thermal decomposition liberates nitrogen at 100C. with residue of d imethyl terephthalate. Nonstaining, nondiscoloring gas generant. USE: For formation of open-cell or closed cell polyvinyl chloride in addition to other plastics and elastomers. CONTAINERS: 5-lb. fiber drums. Explo.-C.P.S. p-NITRO SODIUM PHENOLATE TECHNICAL: Cry stalline paste form; a Chemical Intermediate. Orchem D. & C. p-NITROSOPHENOL TECHNICAL: p-Benzoquinone, monooxime (Tautomeric Form). Paste form; a Chem ical Intermediate. Orchem D. & C. m-NITROTOLUENE TECHNICAL: Liquid form; a Chem ical Intermediate. Orchem D. & C. o-NITROTOLUENE TECHNICAL: Liquid form; a Chem ical Intermediate. Orchem D. & C. p-NITROTOLUENE TECHNICAL: Flake form; a Chem ical Intermediate. Orchem D. & C. NITROTOLUENES MIXED o-m-p TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. 4- NITROTOLUENE-2-SULFONIC ACID TECHNICAL: 5-Nitro-o-toluenesulfonic acid; Para Acid. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. 5- NITRO-o-TOLUENESULFONIC ACID: Sold as 4- Nitrotoluene-2-sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. 5-NITRO-o-TOLUIDINE (NH2=1): Sold as 4-Nitro- 2-aminotoluene Technical, a Chemical Intermediate. Orchem D. & C. NOGAS METAL PICKLING AGENT: Amorphous brown powder; soluble in water and acids. Will give foam-producing solutions when dissolved in water or acids. USE: As an addition agent in acid pickling of iron and steel to produce a foam blanket and to improve the atmosphere by elimination of acid mist particles given oft by the pickling operation. CONTAINERS: 65- and 375-lb. fiber drums. ind.&Bio.-Ind. NORDEL HYDROCARBON RUBBER: See Synthetic Rubber, page 149. NPB SALT: Sold as 4'-Nitro-4-faiphenylcarboxylic acid, sodium salt Technical, a Chemical Intermediate. Orchem D. & C. NUGREEN UREA FERTILIZERS: See Fertilizers, page 64. NUT SETTERS (AIR): See Tools, Construction and In dustrial, page 156. NUTRITION AND THERAPY PRODUCTS Diphenylamine Refined Flake Industrial-- (C6H5)2NH: A product for use in the preparation of screwworm remedies applied to livestock. USE: Sold only to manufacturers for further compounding. CON TAINERS: 100-lb. bags and 300-lb. drums. Ind.& Bio.-Bio. Hydan Feed Supplement: Methionine hydroxy analogue calcium 90%. USE: A source of methionine (an essential amino acid) for poultry and livestock feeds. CONTAINERS: 50-lb. bags. Ind.&Bio.-Bio. Impedex Sodium Propionate N.F.: White powder containing 99% sodium propionate. USE: For inhibi tion of heating and mold growth in feeds and as an aid in the control and prevention of ketosis. CON TAINERS: 50-lb. bags. Ind.&Bio.-Bio. 108 DUP210011253 NUTRITiON-OXO NUTRITION AND THERAPY PRODUCTS (Cont.) Two-Sixty-Two Feed Compound: Free-flowing, non-caking granules of urea; contains 42% nitrogen equivalent to 262% crude protein (nitrogen X 6.25). USE: For use by commercial feed manufacturers as an ingredient of feeds for ruminants (dairy cows, beef cattle, sheep). CONTAINERS: 80-lb. bags. Ind.&Bio.-Bio. NYLON Bristles: See Plastics, Tynex, page 128. Fiber: See Fibers, Synthetic, page 65. Floor Pods: See Professional Floor Maintenance Products, page 131. Monofilament: See Plastics, page 126. Plastic: See Plastics, Zytel, page 128. Resins: See Plastics, Zytel, page 128; Resins (Not Molding), Zytel, page 137. Rifles: See Arms, page 17. Wire Enamels: See Finishes, Industrial, Wire Enamels, page 76. OCENOL TECHNICAL OLEYL ALCOHOL: A chemical intermediate, plasticizer; lubricant, emulsion stabilizer and antifoaming agent. (See also Petroleum Chemicals, Antifoam Agent, Petroleum, page 111.) Orchem D. & C. OCPNA (ORTHO-CHLORO-PARA-NITROANILINE): Sold as 2-Chloro-4-nitroaniline Dry and Paste Tech nical, a Chemical Intermediate. Orchem D. & C. OCTAFLUOROCYCLOBUTANE: See Freon-C-318, page 87. CCTANOL: See Lorol 20, page 99. OIL ADDITIVES: See Petroleum Chemicals, Fuel Oil Additives and Grease and Lubricating Oil Additives, pages 113 to 114. C IL COLORS: See Dyes, page 54; Petroleum Chemicals, Dj/es, Petroleum, page 113. i OIL OF MIRBANE: See Nitrobenzene, page 107. oh OF VITRIOL: See Acids, Sulfuric Acid, page 5. t OtlS AND THINNERS: See Finishes, Trade Sales (Con sumer Products), page 82. OIL-TITETM CARTRIDGES: See Ammunition, page 13. OLEUM (FUMING SULFURIC ACID)-H2S04 AND S03: See Acids, Suifuric Add, Fuming, page 5. OLEYL ALCOHOL: See Ocenol, above. ONDAL A--OXIDIZING AGENT: For one-bath soap ing and oxidizing of vat colors. Orchem D. & C. OPTICAL THICKNESS GAUGE: See Instruments, page 95. ORANGE THIAZOLE: Sold as 6-Ethcxy-2-mercapto- benzothiazoie Technical, a Chemical InteiTnediuie. Orchem D. & C. OREL RUBBER LUBRICANT: See Automotive Special ties 7 Products, page 20. ORGANIC ISOCYANATES: See Hylene Organic Isocyanates, page 93. ORLON ACRYLIC FIBER: See Fibers, Synthetic, page 65. ORTHOLEUM GREASE STABILIZER: See Petroleum Chemicals, Grease and Lubricating Oil Additives, page 114. ORTHOLEUM LUBRICANT ASSISTANT: See Petro leum Chemicals, Grease and Luhricating Oil Additives, page 114. OTMSA (o-TOLUIDINE-m-SULFONIC ACID): Sold as 2-Aminotoluene-5-suifonic acid, sodium salt Tech nical, a Chemical Intermediate. Orchem D. & C. OUST CRABGRASS KILLER: See Lawn and Garden Products, page 98. OVALITE ENAMEL UNDERCOAT: See Finishes, Trade Sales (Consumer Products), Enamels and Undercoats, Dulux--Ovalite Enamel Undercoat, page 79. OVERGLAZE COLORS: See Ceramic Products, page 26. N-OXALYL-p-NITROANILINE:. Sold as 4,-Nitrooxanilic acid Technical, a Chemical Intermediate. Orchem D. & C. N-OXALYL-p-PHENYLENEDIAMINE TECHNICAL: 4 - Aminooxanilic acid. Paste form; a Chemical Inter mediate. Orchem D. & C. OXIDE, TETRAMETHYLENE: See Tetrahydrofuran, page 151. OXIDIZING AGENTS: See Calcium Peroxide, page 24; Hydrogen Peroxide, page 92; Ondal, above; Sitol, page 140, Oxone, page 110; Perdox, page 111; Sodium Peroxide, page 143; Zinc Peroxide, page 165. I -(7-OXO-7H-BENZ( DE) ANTHRACEN- 3 - YLAMINO) ANTHRAQUINONE TECHNICAL: Anthrimide for Green 2BL. Powder form,- a Chemical Intermediate. Orchem D. & C. 109 DUP210011254 OXO-PERCLENE !,!'-(7-OXO-7H-BENZ( DE)ANTHRACEN-3,9- YLENEDIIMINO) DIANTHRAQUINONE TECH NICAL: Anth rimide for Olive T or TR. Powder form; a Chemical Intermediate. Orchem D. & C. OXONE MONOPERSULFATE COMPOUND: An acidic, white, granular, free-flowing solid containing the active ingredient potassium peroxymonosulfate,- readily soluble in water; 1 % solution has pH of 2-3. Minimum active oxygen content 4.5%. Strong oxidizing agent. USE: For manufacture of dry laundry bleaches, de tergent-bleach washing compounds, scouring powders, plastic dishware cleaners and metal cleaners; prepara tion of hair wave neutralizers and pharmaceuticals; general oxidizing reactions. CONTAINERS: 50-lb. multi wall bags. Electrochem. P PACKAGING MATERIALS: S ee Cellophane, page 25; Film, Packaging, page 67; Vexar Plastic Netting, page 161. PADS, NYLON, FLOOR: See Professional Floor Mainte nance Products, page 131. PAINT REMOVER: See Finishes, Refinish, page 72; Finishes, Trade Sales (Consumer Products), page 83. sumer Products), page 83. PAINTS: See Finishes, page 68 (index). PALLADIUMS: See Ceramic Products, page 27; Elec tronic Materials, page 55. PAPER BLEACHING: See Hydrosulfite Cone., page 93; Zepar Reducing Agent, page 164. PAPER CHEMICALS: See Alkanol, page 6; Avitex, page 21; Avitone, page 21; Chlorostain N, page 53; Dupono/, page 52; Zepar, page 164; Zoron, page 765. PAPER DYES: See Dyes, page 53. PAPER LACQUERS: See Finishes, Industrial, Paper Lacquers, page 75. PAPER, PHOTOGRAPHIC: See Photographic Products, page 122. PAPER STOCK: See Surplus Materials, page 146. PARA ACID: Sold as 4-Nitrotoluene-2-sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. PARA BASE: Sold as 2,4-Dinitro-4,-hydroxydiphenyl- amine Technical, a Chemical Intermediate. Orchem D. & C. PARAMOUNT TOOTHBRUSHES: See Toothbrushes, page 158. PARK AVENUETM TOOTHBRUSHES: See Tooth brushes, page 158. PAR1ATE FUNGICIDES: See Fungicides, page 89. PASTE FLOOR WAX: See Professional Floor Mainte nance Products, page 131. PASTE GOLDS: See Ceramic Products, page 28. PATTINA OLEFINIC SHOE MATERIAL: See Coated Fabrics, Vinyl Coated, Fabrilite, page 43. PCONA (PARA-CHLORO-ORTHO-NITROAN1LINE): Sold as 4-Chloro-2-nitroaniline Technical, a Chemical Intermediate. Orchem D. & C. PELLET POWDER: See Explosives, Black Blasting Powder, page 59. PELLETOL NO. I: See Explosives, Blasting Agents, page 62. PENETROMETER, THERMAL: See Instruments, page 95. PENTACHLOROBENZENETHIOL TECHNICAL: Penta- chlorothiophenol. Powder form; a Chemical Inter mediate. Orchem D. & C. PENTAERYTHRITE TETRANITRATE (PETN): White crystalline powder. Sensitive initiating explosive when dry. Must be kept wet with water or an ethyl alcohol and water mixture until used. USE: Manufacture of detonators, "Primacord" and explosive specialties. CON TAINERS: 55-gal. (280-lb. net) metal drums. Explo.-C.P.S. PEPTIZERS, CHEMICAL: See Chemical Peptizers for Natural and Synthetic Rubber, page 39. PERBORATE, SODIUM TETRAHYDRATE: See Sodium Perborate Telrahydrate, page 143. PERCHLORETHYLENE (TETRACHLOROETHYLENE) -- C2CI4: A clear, colorless liquid with ethereal odor; practically insoluble in water; soluble in alcohol and ether; nonflammable and nanexplosive; stable in the presence of moisture. Available in dry cleaning grad^ and technical grade. Boiling range 248.9-251.6f , (120.5-122.0C.). Weight per gal. 13.55 lb. at 20C. USE: Spotting and dry cleaning fluid; textile cleaning; vapor degreasing solvent; cold cleaner; drying agent fpr metals and other solids; vermifuge; solvent for rubbe,", waxes, tar, paraffin and gums; heat transfer medium; for chemical synthesis. CONTAINERS: 55-gal. (700-lb.) drums, tank cars and tank trucks. ' Eleetroche^h. PERCLENE PERCHLORETHYLENE: See Perchlorethylene, directly above. 110 DUP210011255 PERCLENE-PETROliUM PERCLENE PERCHLORETHYLENE PLUS: A dryclean ing composition consisting of perchlorethylene and surfactant additives. USE: As drycleaning fluid in spe cially designed coin-operated installations. CONTAINERS: 55-gal. (700-lb.) drums. Electrochem. PERCLENE PERCHLORETHYLENE PLUS CONCEN TRATE: Concentrated formulation. USE: To replenish surfactant additives in Perclene Plus depleted in use. CONTAINERS: 5-gal. (60-lb.) pails. Electrochem. PERDOX SODIUM BORATE PERHYDRATE: A free- flowing, white powder; dissolves readily in water to produce mildly alkaline peroxide solution. Equivalent NaB03 H20 content min. 96.6%; active oxygen content min. 15.5%. USE: For preparation of dentifrices and hair wave neutralizers; bleaching; oxidation of dyes; stain remover for plastic dishes. CONTAINERS: 125-lb fiber drums. Electrochem PERI ACID DRY TECHNICAL: 8-Amino-l-naphthalene sulfonic acid. Powder form; a Chemical Intermediate Orchem D. & C PERI ACID PASTE TECHNICAL: 8-Amino-l-naph- thalenesulfonic acid. Paste form; a Chemical Inter mediate. Orchem D. & C. PERMALUX NEOPRENE ACCELERATOR: See Ac celerators far Natural and Synthetic Rubber, page 1. PERMISSIBLE EXPLOSIVES: See Explosives, Permissible Explosives, page 63. PERONE HYDROGEN PEROXIDE: See Hydrogen Peroxide, page 92. PEROXIDES: Calcium: See Calcium Peroxide, page 24. Hydrogen: See Hydrogen Peroxide, page 92. Sodium: See Sodium Peroxide, page 143. Zinc: See Zinc Peroxide, page 765. PETERS AMMUNITION: See Ammunition, page 12. PETN: See Pentaerythrite Tetranitrate, page 110. bases such as mono- and diethanolamines. Concentra tion varies widely with the application. CONTAINERS: 55-gal. (360-lb.) steel drums. Orehem-Pet. Antiknock Compounds PM Antiknock: A liquid antiknock compound, the active component of which is a physical mixture of tetraethyl lead and tetramethyl lead. Several mix tures are made by changing the molar percentages of the different lead alkyls. These mixtures are identi fied by the molar percentage of the tetramethyl lead which is present in the active ingredient. Mo l a r % TML Sp e c if ic Gr a v it y Us e Ma x . Co n c . Le a d Al k y l ml /U.S. g a l . 1.583 1.583 1.583 1.584 USE: In concentrations of the lead alkyl active in gredient up to those shown in the table as an anti knock agent for motor gasolines. CONTAINERS: Liter cans; 10- and 55-gal. drums; 3,000-, 6,000- and 9,000-gal. tank cars. Orchem-Pet. Dilute* PM Antiknock: A liquid solution of a PM antiknock in a mixture of 70% xylene and 30% nheptane. USE: For PM blending of gasolines used in laboratory engine testing. CONTAINERS: Liter cans. Orchem-Pet. TEL Aviation Antiknock: A liquid antiknock com pound, the principal component of which is tetraethyl lead (C2H5)4 Pb; Sp. Gr. 1.744. USE: In concentrations up to 4.6 ml TEL per gal. as an antiknock agent for aviation gasolines. CONTAINERS: Liter cans; 10- and 55-gal. drums; 3,000-, 6,000- and 9,000-gal. tank cars. Orchem-Pet. Dilute* TEL Antiknock: A liquid solution of TEL Aviation Antiknock in a mixture of 70% xylene and 30% n-heptane. USE: For TEL blending of gasolines used in laboratory engine testing. CONTAINERS: Liter cans. Orchem-Pet. PETROLEUM CHEMICALS Antifoam Agent, Petroleum Ocenol: Clear, light yellow, low-viscosity liquids; typical density 7-lb./gal. Technical grades of oleyl alcohol rich in cetyl and unsaturated alcohols. USE: Effective antifoaming agents in petroleum and organic TEL Motor Antiknock: A liquid antiknock compound, the principal component of which is tetraethyl lead (C2H5)4 Pb; Sp. Gr. 1.586. USE: In concentrations up to 4 ml TEL per gal. as an antiknock agent for motor gasolines. CONTAINERS: Liter cans, 10- and 55-gal. drums, 3,000-, 6,000- and 9,000-gal. tank cars. Orchem-Pet. *See page 112 for Dilute Solution Basis. Ill DUP210011256 PETROLEUM PETROLEUM CHEMICALS (Cent.) Antioxidants Petroleum Tetramix Antiknock: A liquid antiknock compound, the active component of which is a redistribution mix Gasoline Antioxidant No. 5: A solution of N-n-butyl- p-aminophenol in alcohols having the following weight i ture of tetraethyl lead and tetramethyl lead. Several composition: redistribution mixtures are made by changing the 50% N-n-butyl-p-aminophenol HOC6H4NHC4H, molar percentages of the different lead alkyls. These 30% anhydrous isopropanol mixtures are identified by the molar percentage of the 20% anhydrous methanol 4 TML used in the reaction. The solution is readily soluble in gasoline in normal Mo l a r % TML Sp e c if ic Gr a v it y Us e Ma x . Co n c . Le a d Al k y l ml /U.S. g a l . use concentrations. The use of benzene or other aromatic solvent is recommended for preparation of concentrated solutions; Sp. Gr. 0.90. USE: For re ducing the formation of gum and precipitation of lead 25 1.587 3.68 in gasoline. Concentration required 0.002 to 0.01% 50 1.585 3.37 by weight. CONTAINERS: 55-gal. (400-lb.) steel drums. 75 1.584 3.05 Orchem-Pet. Gasoline Antioxidant No. 22: N,N'-di(sec.-butyl)-p- USE: In concentrations of the lead alkyl active in gredient up to those shown in the table as an anti knock agent for motor gasolines. CONTAINERS: Liter cans; 10- and 55-gal. drums; 3,000-, 6,000- and 9,000-gal. tank cars. Orchem-Pef. phenylenediamine containing no solvent. A mobile liquid readily soluble in gasoline in all proportions and at operating temperatures; Sp. Gr. 0.94. USE: For retarding the formation of gum and precipitation of lead in gasoline. Concentrotion required 0.001 0.005% by weight. CONTAINERS: 55-gal. (425-lb.) Dilute* Tetramix Antiknock: A liquid solution of a steel drums. Orchem-Pet. Tetramix antiknock in a mixture of 70% xylene and Gasoline Antioxidant No. 23: A 50% solution of 30% n-heptane. USE: For Tetramix blending of N,N'-di-isopropyl-para-phenylenediamine and alco gasolines used in laboratoryengine testing. CON TAINERS: Liter cans. Orchem-Pet. hols; Sp. Gr. 0.87. The product is readily soluble in gasoline at normal use concentrations. Aromatic gasolines or solvents can be used to prepare con TML Antiknock: A liquid antiknock compound, the centrated solutions. USE: For inhibiting the oxidation principal component ofwhich istetramethyl lead of gasolines, catalyzing the sweetening of sour blend (CH3)4 Pb; Sp. Gr. 1.583. USE: In concentrations up ing stocks and inhibiting the precipitation of lead in to 2.74 ml TML per gal. (equivalent in Pb content to gasoline. Concentrations required vary from 0.0016 4 ml TEL per gal.) as an antiknock agent for motor 0.006% by weight, depending upon application. gasolines. CONTAINERS: Liter cans; 10- and 55-gal. CONTAINERS: 55-gal. (375-lb.) steel drums, tank cars I drums; 3,000-, 6,000- and 9,000-gal. tank cars. Orchem-Pet. and tank trucks. Orchem-Pet. i Antioxidant No. 29--2,6-Di-tertiary butyl-4- Dilute* TML Antiknock: A liquid solution of TML anti methyl phenol: A light-colored, finely divided solid; knock in a mixture of 70% xylene and 30% n-hep non-coloring and readily soluble in oils; Sp. Gr. 1.04. tane. USE: For TML blending of gasolines used in USE: In turbine, transformer and hydraulic oils, waxes laboratory engine testing. CONTAINERS: Liter cans. and greases to retard oxidation and in gasoline to Orchem-Pet. reduce the formation of gum and precipitation of lead. Concentration required 0.003-0.015% by Dilute Solution Basis weight. CONTAINERS: 100-lb. fiber drums. Orchem-Pet. *Dilute solutions are available in two mixtures to provide for greater accuracy when adding small volumes of the antiknock to gasolines for use in laboratory engine testing. 7. Gram Basis: 2 ml added to 400 ml of gasoline gives an elemental lead content of 2 grams of Pb per U.S. gallon. 2. Milliliter Basis: 2 ml added to 400 ml of gasoline gives the same elemental lead content as in 2 ml of TEL per U.S. gallon. Antioxidant No. 30: Principal active ingredient--2, 4-dimethyl-6-tertiarybutyl phenol (97% minimum). A light-viscosity straw-colored liquid, readily soluble in gasolines and oils. Sp. Gr. 0.961. USE: In turbine, transformer, and hydraulic oils, waxes and greases to retard oxidation, and in gasolines to reduce gum formation and precipitation of lead. Concentration required 0.003-0.015% by weight. CONTAINERS: 55-gal. (400-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. 112 DUP210011257 PETROLEUM PETROLEUM CHEMICALS (Cont.) Antioxidant No. 31: Principal active ingredient-- 2,4-dimethyl-6-tertiarybutyl phenol (72% minimum). A light-viscosity yellow-colored liquid, readily soluble in gasolines and oils. Sp. Gr. 0.97. USE: In turbine, transformer, and hydraulic oils, waxes, and greases to retard oxidation, and in gasolines to reduce gum formation and precipitation of lead. Concentration required 0.004-0.020% by weight. CONTAINERS: 5-5-gal. (400-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Corrosion Inhibitors, Petroleum AFA-1 (Aviation Fuel Additive): Clear, light amber, slightly viscous liquid; typical specific gravity 0.92. USE: Corrosion inhibitor for use in military fuels under specifications MIL-1-25017 (A5G), MIL-G-3056, MIL-G5572 and MIL-J-5624 and for use in commercial jet fuels. Also used as a products pipeline rust inhibitor. Concentration varies from 0.0002-0.006% by weight, depending upon application. CONTAINERS: 55-gal. (400-lb.) steel drums, tank cars and tank trucks. Orehem-Pet. Rust Preventive No. 2: 80% active ingredient in kerosene. A straw-colored liquid. Sp. Gr. 0.92. USE: As an antirust and surface active antistalling agent in petroleum distillates at concentrations up to 0.01% by weight. CONTAINERS: 55-gal. (400-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Dyes, Petroleum Hydrocarbon soluble dyes for imparting distinctive colors to gasoline and other petroleum products. Available in flake, powder and liquid form. Oil Bl u e A: Essentially 1,4-Di(isopropylamino)anthraquinone. Dry form in flakes only. Oil Bl u e A So l u t io n : A 13% solution of Oil Blue A in a solvent mixture of orthodichlorobenzene and chloroform. OIL BRONZE: A blend of Oil Red and Oil Orange. Dry form in both powder and flakes. Oil Br o n z e Liq u id , Proprietary. Oil Or a n g e, Essentially Phenylazo-2-naphthol. Dry form in both powder and flakes. Oil Or a n g e Liq u id -. Proprietary. Oil Red : Essentially Methyl derivatives of azo benzene 4-azo-2-naphthol. Dry form in both powder and flakes. Oil Red A: Essentially Methyl derivatives of azobenzene-4-azo-2-naphthol. Slightly stronger and bluer than Oil Red. Dry form in both powder and flakes. Oil Red B Liq u id : Alkyl derivatives of azobenzene- azo-naphthols. OIL Ye l l o w NB: Essentially p-Diethylaminoazobenzene. Oil COLOR IA, Proprietary. Used for identification purposes. CONTAINERS: Dry Forms, 100-lb. (net) fiber drums. Liquid Form, 240-lb. (net) 30-gallon steel drums. Orchem-Pet. Fuel Oil Additive, Petroleum DMA-F (Multifunctional Additive--Fuel Oil): A clear, medium viscosity, amber liquid; typical density 7.10 Ib./gal. USE: An ashless additive developed to prevent or eliminate water haze and emulsion prob lems while also providing excellent dispersancy, rust prevention, and stabilization. CONTAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Fuel Oil Additive No. 2: A viscous, light amber, ashless liquid. Miscible in No. 2 Fuel Oil in all pro portions. Sp. Gr. 0.90. USE: At concentrations of 0.003-0.02% by weight in household heating and diesel oils to decrease the rate of insoluble residue formation by its antioxidant effect and to reduce filter clogging by its dispersant action. It also has rust preventative properties. CONTAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Fuel Oil Additive No. 3: A clear, low viscosity, light amber liquid; typical density 7.10 Ib./gal. USE: An ashless antioxidant and color stabilizer; does not contribute to water hazing or emulsification. Broader properties obtained by blending with Metal De activator or Fuel Oil Additive No. 2. Concentration required varies with application. CONTAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Fuel Oil Additive No. 7: A viscous, light amber, ashless liquid. Miscible in No. 2 Fuel Oil in ail propor tions. Sp. Gr. 0.86. USE: At concentrations of 0.003 0.02% by weight in household heating and diesel oils to decrease the rate of insoluble residue formation by its stabilizing effect and to reduce filter clogging by its dispersant action. CONTAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orehem-Pet. Fuel Oil Additive No. 11: A viscous, light amber, ashless liquid. Miscible in fuel oil in all proportions. Sp. Gr. 0.88. USE: Same as Fuel Oil Additive No. 2. Imparts antioxidants and color stabilizing properties along with detergent and metal deactivation. CON TAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Fuel Oil Additive No. 12: A viscous, light amber, ashless liquid. Miscible in fuel oil in all proportions. Sp. Gr. 0.88. USE: Same as Fuel Oil Additive No. 2. Imparts antioxidant and color stabilizing properties along with detergent and metal deactivation. FOA-12 has greater dispersancy than FOA-11. Similarly, 113 DUP210011258 Ml. PETROLEUM PETROLEUM CHEMICALS (Cont.) oils and turbine oils. CONTAINERS: 51-gal. (225-lb.) FOA-11 has better antioxidant properties than FOA-12. CONTAINERS: 55-gal. (375 lb.) steel drums, tank cars and tank trucks. Orchem-Pet. fiber drums; tank cars or tank trucks when molten. Orchem-Pet. Phenyl - beta - naphthylamine--C10H7NHCSH5: Fuel Oil Additive No.208: A mixture of Fuel Oil Additive No. 2 (92 parts) and Metal Deactivator (8 parts). USE: Same as Fuel Oil Additive No. 2. CON TAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. A yellow-gray flake; Sp. Gr. 1.18. USE: Asa stabilizer for greases and lubricating oils. Concentration -- up to 0.5% by weight in greases, up to limit of solubilities in oils. CONTAINERS: 51-gal. (225-lb.) fiber drums. Orchem-Pet. Fuel Oil Additive No. 212: A mixture of Fuel Oil Additive No. 2 (88 parts) and Metal Deactivator (12 parts). USE: Same as Fuel Oil Additive No. 2. CON TAINERS: 55-gal. (375-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. JFA-5 (Jet Fuel Additive): Clear, light amber liquid; soluble in all grades of aviation turbine fuels; typical Quinizarin, Solvent Purified: A purified form of Di- hydroxy-4-anthraquinone. USE: As antioxidant in synthetic lubricants to impart high temperature stability. Use concentration varies with base fluid and performance requirements. CONTAINERS: 25-gal. (50-lb.) fiber drums. Orchem-Pet. Metal Deactivators, Petroleum density 7.30 Ib./gal. USE: Essentially ashless additive for increasing the high-temperature stability of avia tion jet fuels. Concentration required varies with application; specific approval in commercial jet fuel up to 30 lb./1,000 bbl. CONTAINERS: 55-gal. (375-lb.) steel drums. Orchem-Pet. Metal Deactivator: An 80% solution of active in gredient in on aromatic solvent. The active ingredient is principally N, N'-disalicylidene-l,2-propanediamine. A dark amber liquid; may crystallize during prolonged storage. Readily soluble in gasolines and other hydro carbon oils above 25C. Miscible with gasoline anti oxidants and Fuel Oil Additive No. 2. Sp. Gr. 1.08. Grease and Lubricating Oil Additives USE: For improving storage and color stability of petroleum distillates containing dissolved copper. It Ortholeum 162 Lubricant Assistant: A mixture of is particularly useful as an adjunct to gasoline anti irf I't mono- and di-alkyl phosphates (RH2P04 and R2ffP04). Light brown viscous liquid; freezing point about 15C.; oxidants and Fuel Oil Additive No. 2. Concentration required 0.0002-0.002% by weight. CONTAINERS: Sp. Gr. 0.98; miscible with oil in all proportions. USE: 30-gal. (260-lb.) and 55-gal. (475-lb.) steel drums. In oils to improve film strength and to impart rust Orchem-Pet. ;i [ preventive properties. Concentrations vary with applications. CONTAINERS: 55-gal. (425-lb.) steel Metal Deactivator No. 2: A 50% solution of the same active ingredient as in Metal Deactivator but drums. Orchem-Pet. having better resistance to crystallization. Sp. Gr. Ortholeum 300 Grease Stabilizer; Mixture of com plex aromatic amines providing a combination of an antioxidant and a metal deactivator action. It is a tan-colored, flaked product. USE: As a stabilizer for 0.99. USE: Same as Metal Deactivator. CONTAINERS: 30-gal. (250-lb.) and 55-gal. (450-lb.) steel drums. Orchem-Pet. Metal Suppressor: Counteracts the pro-oxidant effect greases. Concentration required is usually 0.1 -- 1.0% of copper or copper alloys and thereby increases by weight. CONTAINERS: 175 lb. fiber drums. storage stability of gasoline and fuel oil exposed to Orchem-Pet. such surfaces. An amber-colored liquid containing 50% active ingredient dissolved in methanol and |i I || Ortholeum 304 Grease and Oil Antioxidant: 4,4'- tetramethyldiaminodiphenyimethane containing no isopropanol. drums. CONTAINERS: 55-gal. (400-lb.) steel Orchem-Pet. solvent. Light gray granular solid; specific gravity 1.03; bulk density approx. 5-lb./gal. USE: An anti oxidant for use in lubricants. Concentrations vary Multifunctional Additives, Petroleum DMA-4 (Multifunctional Additive): Clear, nearly with applications. CONTAINERS: 41-gal. (200-lb.) fiber drums. Orchem-Pet. colorless, light viscosity liquid; typical specific gravity 0.92. USE: An additive for gasolines to eliminate Phenyl - alpha - naphthylamine--ClaH7NHC6H5: Lemon-yellow lumps and irregular pellets up to Vi -in. diameter or molten; Sp. Gr. 1.17. Normal concentra tion up to 0.5% in oils, up to 1.0% by weight in greases. USE: As a stabilizer for greases, transformer carburetor icing, clean carburetors, prevent rusting, reduce spark plug fouling and preignition. Concentra tion required varies between 0.0002-0.006% by weight, depending upon application. CONTAINERS: 55-gal. (400-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. 114 ;l DUP210011259 PETROLEUM-PHENYL PETROLEUM CHEMICALS (Cont.) DMA-4A Multifunctional Additive: Same active ingredient as DMA-4, but contains 20% methanol solvent rather than 20% kerosene used in DMA-4. Clear, nearly colorless, light viscosity liquid; typical specific gravity 0.92. USE: An additive for gasolines to eliminate carburetor icing, clean carburetors, prevent rusting, reduce spark plug fouling and pre ignition. Concentration required varies between rut .Awf\rvvCi-\uA.uAuAo/7Co\ f lb_ y we*ig1m.,1aepenal*ing upon appli ca tion. Co n t a in e r s : 55-gal. (400-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. DMA-5 Multifunctional Additive: Clear, light yellow liquid, typical Sp. Gr. 1.08. Blend of DMA-4A and cresyldiphenylphosphate in alcohol. USE: An additive for gasolines to eliminate carburetor icing, clean carburetors, prevent rusting, reduce spark plug fouling and preignition. Concentration required varies between 0.01-0.10% by weight, depending upon application. CONTAINERS: 55-gal. (450-lb.) steel drums, tank cars and tank trucks. Orchem-Pet. DMF-Dimethyl Formamide, Technical: Colorless liquid; B.P. 307F.; Sp. Gr. 0.95. USE: In gasoline as a carburetor antistall agent and fuel line freezing point depressant. Concentration varies with fuel volatility and performance requirements; generally 0.02-0.10% by volume. CONTAINERS: 55-gal. (410lb.) steel drums, tank cars and tank trucks. Orchem-Pet. Stable Fluids Zonyl E-7 Fluoroalkyl Ester: Condensation product of pyromellitic anhydride and a mixture of C-5 and C-7 trihydrofluoroalcohols. Has high thermal and oxidative stability. 14.7 lbs. per gal.; approx, viscosity at 115F. of 688 cp. USE: Lubricant for long per formance at high temperature, instrument damping fluid, instrument oil and power fluids of various types. CONTAINERS: 1- and 5-gal. (10- and 60-lb net) steel non-returnable drums. Orchem-Pet. Zonyl E-91 Fluoroalkyl Ester: Ester of di-camphoric acid and C-7 trihydrofluoroalcohol. Has high thermal and oxidative stability. 13.3 lbs. per gal.; approx, viscosity at !15F. of 114 cp. USE: Lubricant for long performance at high temperature, instrument damping fluid, instrument oil and power fluids of various types. CONTAINERS: 1- and 5-gal. (10- and 60-lb. net) steel non-returnable drums. Orchem-Pet. PETROWET R SURFACE ACTIVE AGENT: Saturated hydrocarbon sodium sulfonate. A wetting and pene trating agent effective in high concentrations of electro lytes and acids, especially suitable for use in the acidizing of oil wells. Orehem D. & C. p-PHENETIDINE TECHNICAL: p-Ethoxyaniline. Liquid form; a Chemical Intermediate. Orehem D. & C. *PHENOTHIAZINE: N.F. powder and N.F. purified. USE: As an antioxidant for synthetic lubricating oils and as a polymerization inhibitor. CONTAINERS: 150-lb. fiber drums. ind. & Bio.-lnd. PHENYL-ALPHA-NAPHTHYLAMINE: See Petroleum Chemicals, Grease and Lubricating Oil Additives, m-sA- 7 ^A p-PHENYLAZOANILINE HYDROCHLORIDE: Sold as 4- Aminoazobenzene hydrochloride Technical, a Chem ical Intermediate. Orehem D. & C. PHENYL AZO-NAPHTHOL: See Petroleum Chemicals, Petroleum Dyes, Oil Orange, page 173. PHENYL-BETA-NAPH7HYLAMINE: See Petroleum Chemicals, Grease and Lubricating Oil Additives, page 714. N-PHENYLDIBENZYLAMINE: Sold as N,N-Dibenzyl- aniline Technical, a Chemical Intermediate. Orehem D. & C. PHENYL DIETHANOLAMINE: Sold as 2,2'-Phenylimino- diethanol Technical, a Chemical Intermediate. Orehem D. & C. 3-PHENYL-1,7 -DIMETHYLUREA (FENURON): See Weed and Brush Killers, Dybar, page 162. m-PHENYLENEDIAMINE TECHNICAL: Flake form; a Chemical Intermediate. Orehem D. & C. 1,3-PHENYLENEDIAMINE-4~SULFONIC ACID TECH NICAL: 2,4-Diaminobenzenesulfonic add. Crystal line paste form; a Chemical Intermediate. Orehem D. & C. PHENYLENE NEROL ACID: Sold as 5-Amino-2-(p- aminoanilino)benzenesulfonic acid Technical, a Chemical Intermediate. Orehem D. & C. 2,2'-PHENYLIMINODIETHANOL TECHNICAL: Phenyl diethanolamine; N,N-Bis(2-hydroxyethyl)aniline; Diethanolaniline. Solid form; a Chemical Intermediate. Orehem D. & C. N-PHENYL GAMMA ACID DRY TECHNICAL: Gran ular solid form; a Chemical Intermediate. Orehem D. & C. N-PHENYL GAMMA ACID PASTE TECHNICAL: 7- Anilino-1-naphthol-3-sulfonic acid. Paste form; a Chemical Intermediate. Orehem D. & C. N-PHENYL J ACID TECHNICAL: 6-Anilino 1 naphthol- 3-sulfonic acid. Paste form; a Chemical Intermediate. Orehem D. & C. indicates resale product. 115 DUP210011260 PHENYL-PHOTOGRAPHIC 1-PHENYL-3-METHYL-5-PYRAZOLONE TECHNICAL: Granular solid form; a Chemical Intermediate. Orchem D. & C. N-PHENYL-ALPHA-NAPHTHYLAMINE TECHNICAL: Pellet form; a Chemical Intermediate. Orchem D. & C. N-PHENYL-BETA-NAPHTHYLAMINE TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. N-PHENYL PERI ACID TECHNICAL: 8-Anilino-l-naph- thalenesulfonic acid, ammonium salt. Paste form, a Chemical Intermediate. Orchem D. & C. N-PHENYL-p-PHENYLENEDIAMINE: Sold as p-Amino- diphenylamine Technical, a Chemical Intermediate. Orchem D. & C. PHOSPHATES, FATTY ALCOHOL: See Zelec, page 164. PHOSPHORESCENT CHEMICALS: See Luminescent Chemical Products, page 101. PHOTOCOPY PAPER: See Photographic Products, page 118. base. They are extremely durable, flexible and have a high degree of dimensional stability. Cronaflex films handle easily in processing and dry quickly. They lie flat after processing and the special matte surfaces permit sharp, clean pen and pencil lines which will not smear or smudge, yet can be erased easily and cleanly. Six types of Cronaflex films are available in sensitized form: Cronaflex Contact Film: A slow speed photo graphic film on 0.004-in. and 0.007-in. Cronar, for making contact reproductions. Photo Prod. Cronaflex Direct Positive Film: A photographic emulsion on 0.004-in. and 0.007-in. Cronar, which will produce positive prints directly from original copy without the need for making intermediate nega tives. Photo Prod. Cronai Reduction Film: A high contrast, high speed orthochromatic film for negative reduction of engineering drawings. On 0.003 in. polyester bose. Has the durability needed for repeated high speed printback in diazo and blueprint equipment, Photo Prod. PHOTOGRAPHIC CHEMICALS: See Photographic Cronaflex Drafting Film: The surface and 0.004-in. Products, page 121. polyester film base are made in one complete process to provide a drafting material with superior pencil \1 I f rii PHOTOGRAPHIC FILM: See Photographic Products, page 119. acceptance, erasability, transparency and tear strength. Supplied in all standard roll and sheet j I* !f PHOTOGRAPHIC PAPERS: See Photographic Products, page 122. sizes with a drafting surface on one or both sides. Photo Prod. IS Cronaflex Projection Film: A fast projection speed, PHOTOGRAPHIC PRODUCTS: orthochromatic film on 0.004-in. and 0.007-in. Cronar. Ideally suited for making work-size prints Photographic Products are classified as follows: from miniaturized negatives. Cronaflex Projection ij ENGINEERING REPRODUCTION FILMS, page 116 Film may also be processed for use as an offset print : ! GRAPHIC ARTS FILMS, page 116 ing plate. Photo Prod. ' 1 INDUSTRIAL AND GRAPHIC ARTS PAPERS, page 11 8. Cronaflex U-C Drafting Film: A drafting fll m with MOTION PICTURE FILMS: o fine matte surface which has superior ink accept Aerial Films, page 119. ability. The special surface also readily accepts Camera Negative Films, page 119. Leader Stocks, page 120. pencil. Supplied on 0.004-in. and 0.007-in. Cronar in all standard roll and sheet sizes. Photo Prod. Safety Duplicating Films, page 120. Safety Release Positive Films, page 120. Safety Special Purpose Filins, page 120. PHOTOGRAPHIC CHEMICALS, page 121. PHOTOGRAPHIC PAPERS, page 122. PHOTORECORDING FILMS, page 123. PRINTING PLATES (Dycril), page 123. SHEET FILMS, page 123. SPECIAL PRODUCTS, page 123. GRAPHIC ARTS FILMS Acetate Ortho Litho Film: A high contrast orthochro matic film on an acetate base. The special surfaces on both sides greatly minimize Newton rings and trapped air problems. It is especially suited for those camera and contact jobs which require intricate stripping, cracking and scribing. Photo Prod. ENGINEERING REPRODUCTION FILMS Du Pont Cronaflex engineering reproduction films are coated on Cronar polyester photographic film Cronapress Conversion Film: A nonphotographic pressure-sensitive film for producing high quality one-to-one conversions from type, engravings, electro types and other types of relief plates. Coated on 116 DUP210011261 PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cent.) 0.002-in. polyester film base. Following initial im pacting step using a Du Pont Cronapress clarifying machine, a special densifying solution is applied to produce a high contrast negative of extreme fidelity. Photo Prod. Cronaf Clear Back Ortho Film: A high contrast orthochromatic film with a low density antihalation coating designed to permit exoosure through the film base. This provides lateral reversal of image directly on camera. The special surfaces on both sides greatly reduce Newton rings and trapped air problems. Standard 0.004-in. polyester film base. Photo Prod. Cronar Clear Base: A clear polyester film for graphic arts. Available in three types: C-41--0.004-in. thick, sub-coated on one side. Sup plied in rolls only. C-42--0.004-in. thick, sub-coated on two sides. Supplied in standard sheet sizes. C-72--0.007-in. thick, sub-coated on two sides. Supplied in standard sheet sizes. Photo Prod. Cronar Commercial S Film: A blue-sensitive density- stable emulsion on 0.007-in. polyester film base. Re- touchable surface. Designed especially for making continuous tone negatives and positives. Also well suited for positives or cancelling masks for color separation techniques. PhotoProd. Cronar Direct Positive Clear Film: A high contrast, contact speed film on 0.004 and 0.007-in. base especially suited for making duplicate or laterally reversed negatives and positives. It is exposed through amber or yellow sheeting. PhotoProd. Cronar Direct Positive D Film: An extremely high contrast, slow speed film for producing line and half tone positives from positives or negatives from nega tives with simple exposure and development steps. For Dycril Photopolymer Printing Plates and smooth- surface, pre-sensitized offset plates. PhotoProd. Cronar High Contrast Pan Film: A moderately high contrast, continuous tone panchromatic negative film on 0.007-in. polyester base. Retouchable surface. For making separation negatives from reflection copy or very low contrast transparencies. Photo Prod. Cronar Low Contrast Pan Film: An extremely fast, low contrast continuous-tone film on 0.007-In. poly ester base. Retouchable surface. For making separa tion negatives in color systems where low density range or low gamma is required. Photo Prod. Cronar Low Gamma Pan Film: An extremely fast, low contrast, continuous-tone panchromatic film on 0.007 in. polyester base. For use with color separation systems, particularly gravure, where negatives of extremely low density range or low gamma are re quired. Photo Prod. Cronar Masking Film: A fast blue sensitive, medium contrast emulsion on 0.004-in. polyester film base. Re touchable surface. For use in making overlay masks for contrast adjustment and color correction of separa tion negatives. Photo Prod. Cronar Medium Contrast Pan Film: A medium contrast panchromatic film on 0.007-in. polyester base. Retouchable surface. For making separation nega tives from color transparencies. Photo Prod. Cronar Ortho A Litho Film: A high contrast, ortho chromatic litho emulsion coated on 0.004-in. and 0.007-in. polyester film base with a nonhalation backing. This film is dimensionally stable, quick dry ing, lies flat, etches easily and has wide exposure latitude with high resolving power. Photo Prod. Cronar Ortho D Litho Film: An extremely high contrast orthochromatic litho emulsion coated on 0.004-in. polyester film base with a low-density non halation backing that permits exposure through the base. Designed especially for use with Dycril Photo polymer Printing Plates, the film allows lateral reversal of the image directly on camera. It also provides speciol surfaces on both sides to minimize Newton rings and trapped air problems. Photo Prod. Cronar Ortho M Litho Fil m: A high contrast ortho chromatic film which has incorporated in its structure a unique emulsion and backing surface that greatly minimizes the common contact problems caused by Newton rings and trapped air bells. Available coated on 0.004-in. and 0.007-in. polyester film base. Photo Prod. Cronar Ortho S Litho Film: An extremely high contrast orthochromatic litho emulsion coated on 0.004-in. and 0.007-in. polyester film base with a nonhalation backing. Especially suitable for camera halftones because of its exposure and development latitude, superior dimensional stability and dot etching characteristics. Photo Prod. Cronar Pan Litho Film: A high contrast panchro matic litho emulsion on dimensionally stable 0.004-in. polyester film base, especially formulated for direct color separation work and highlight masking in photo lithography and the graphic arts. It has a non halation backing and is available in all standard sizes. Photo Prod. Cronar Pan Masking Film (0.004-in. and 0.007 in. Polyester Base): A camera-speed, medium con trast, continuous-chromatic emulsion coated on 0.004 117 DUP210011262 w PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cont.) and 0.007 in. polyester film base. The 0.004 in. product has a nonhalation backing and is used pri marily as a negative masking material in the contrast adjustment and color correction of color copy. The 0.007 in. material provides additional dimensional stability. No antihalation coating. For use primarily in camera-back masking applications. Photo Prod. Cronai Pan Masking Film (0.007-in. Polyester Base): A camera-speed, medium contrast, continuous- tone panchromatic emulsion coated on 0.007-in. poly ester film base to provide additional dimensional stability. No antihalation coating. For use primarily in camera-back masking applications. Photo Prod. Cronar Rotofilm: A high contrast orthochromatic emulsion used for making etch resists in the gravure industry. It is coated on 0.007-in. polyester film base with a nonhalation backing. The base can be stripped from the emulsion after laydown on plates or cyl inders. Photo Prod. Screen Process Film: A camera speed orthochromatic emulsion on a stable supporting base from which it is stripped to become the actual stencil for silk screen printing. Film may be exposed in a copy camera, in an enlarger or by contact. Photo Prod. INDUSTRIAL AND GRAPHIC ARTS PAPERS Copytone Variable Contrast Photocopy Paper: For making reproductions of continuous tone, halftone or line copy. Contrast may be changed through use of colored filters. Supplied in two types: A-- Single Weight, white Semi-Matte R -- Single Weight, white Glossy Photo Prod. Lino-Writ 1 Photorecording Paper: A photographic paper for general oscillograph recording. Spooled in sizes to fit all standard recording oscillographs. Supplied in types: B-- Standard Weight W--Thin Photo Prod. Lino-Writ 201 Photorecording Paper: A product with the same general characteristics as Lino-Writ 1 but designed far high speed and rapid access proc essing. Photo Prod. Lino-Writ 2 Photorecording Paper: A moderately high speed orthochromatic photographic paper for use in oscillographic recording over a wide range of exposures at low, normal and medium frequencies. Types: Photo Prod Lino-Writ 202 Photorecording Paper: A product with the same general characteristics as Lino-Writ 2 but designed for high speed and rapid access proc essing. Photo Prod. Lino-Writ 3 Photorecording Paper: An ortho- chromatic paper for oscillographic recording at high writing speeds. Spooled to Fit all standard recording oscillographs. Supplied in types: B -- Standard Weig W --Thin Photo Prod. Lino-Writ 203 Photorecording Paper: A product with the same general characteristics as Lino-Writ 3 but designed for high speed and rapid access proc essing. Photo Prod. Lino-Writ 4 Photorecording Paper: Fastest, thinnest, whitest of all photorecording papers. Spooled in standard sizes. Ultra-thin, all rag base. Photo Prod. Lino-Writ 5 Direct Writing Photorecording Paper: A high speed photorecording paper designed for use in direct writing oscillographs. Exposure is made with light rich in blue. Development is automatic in white light. B -- Standard Weight W--Thin Photo Prod. LithoTM T Photographic Paper: A transparent water proof stock, nonhalation backed, with a high contrast orthochromatic projection emulsion. It is an eco nomical material for line reproduction work. Photo Prod. Micro-Writ Photocopy Paper: A fast orthochromatic projection paper with high contrast. Especially de signed to make prints from microfilm negatives. Sup plied in two types: B -- Standard Weight, Semi-Matte W--Extra-Thin, Semi-Matte Photo Prod. Photo-Writ Photocopy Paper: A paper producing deep, rich blacks and crisp, clean whites with high contrast for photocopy work. Furnished in rolls spooled to fit standard photocopy machines, Photo Writ is available in four types. A -- Thin, Semi-Matte B -- Standard Weight, Semi-Matte K-- Standard Weight, Semi-Gloss W--Extra-Thin, Semi-Matte Photo Prod. Seismo-Writ Recording Paper: High contrast and wide lattitude with rapid developing and fixing char acteristics make this photographic paper suitable for use with field recording machines employed in oil exploration work. Available in sizes to fit all standard DUP210011263 PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cont.) seismic recorders. Supplied in types: B -- Standard Weight W -- Thin Photo Prod. MOTION PICTURE FILMS Aerial Films Cronar Fine Grain Aerial Duplicating Positive Film: Can be processed in normal positive deve lopers. Emulsion has sufficient speed to permit printing in same exposure range as fine grain release positive films. Has a decided speed advantage over dyed materials because of reduction of contrast through emulsion manufacturing techniques. Available in 70mm, 5-in., 6.6-in. and 916 -in. in Type 228R only. Photo Prod. Cronar Fine Grain Aerial Film: Recommended for making positive transparencies for projection viewing or direct reading. Dimensional stability makes it an excellent companion to Cronar negative films. Avail- ablein 70mm, 5-in., 6.6-in. and 972 -in. in Type 225R only. Photo Prod. Cronar High Contrast Aerial Negative Film: A high contrast, fine grain, panchromatic negative film which is capable of producing aerial photographs of maximum contrast when factors such as altitude and atmospheric haze have reduced effective subject con trast. Can be rapidly processed at solution tempera tures up to 120F. Available in 70mm, 5-in., 5.481-in. and 9!6 -in. in Type 140R only. Photo Prod. Cronar Rapid Processing Aerial Negative Film: A fine grain, panchromatic negative film with a contrast range that makes it useful for medium and low altitude aerial photography. Can be rapidly processed at solution temperatures up to 125F. because of its emulsion characteristics. Available in 70mm, 5-in.; 5.481-in. and 916 -in. in Type 131R only. Photo Prod. Cronar Superior 2 Aerial Negative Film: A fine grain, panchromatic negative film with wide exposure latitude. Speed is adequate for aerial use at short exposure times under adverse lighting conditions. Can be processed rapidly at solution temperatures up to 120F. Available in 70mm, 5-in., 5.481-in. and 916 -in. in Type 136R only. Photo Prod. Camera Negative Films--Cronar 0.0045-in. Base Films for high speed photography, data recording, missile tracking, aerial photography and other non entertainment uses where thinner, tougher, dimen sionally stable, more flexible and longer film lengths are desirable. Cronar High Contrast Fine Grain Negative: A fine grain panchromatic negative with high red sensitivity especially designed for instrumentation photography where ground to air and air to ground photographic records are desired. Available in 16mm Type 140A, 35mm Type 140B and 70mm Type 140E in 5-in., 5.481-in. and 916 -in. widths. Photo Prod. Cronar High Speed Rapid Processing Negative: Same emulsion as 931 Type. Available in 16mm Type 131 A, 35mm Type 131 B arid 70mm Type 131E in 5-in., 5.481-in. and 916 -in. widths. Photo Prod. Cronar Superior 2 Fine Grain Negative: Same emulsion as 936 Type. Available in 16mm Type 136A, 35mm Type 136B and 70mm Type 136E in 5-in., 5.481-in. and 916 -in. widths. Photo Prod. Camera Negative Films--T/A NH 0.005-in. Base High Speed Rapid Reversal Panchromatic Nega tive Film: A high speed panchromatic negative stock designed especially for rapid reversal processing at temperatures up to 125F. For use in television news reel and sports photography. May be processed and used as negative film. Available in 16mm Type 931A and 35mm Type 931B. Photo Prod. Panchromatic Negative Film: A fine grain panchro matic negative film of wide latitude for interior as well as exterior photography. This film may also be used as a reversal duplicating film. Available in 16mm Type 914A only. Photo Prod. Rapid Reversal Panchromatic Negative Film: A medium speed panchromatic negative designed espe cially for rapid reversal processing at temperatures up to 125 F. For use in television newsreel and sports photography. May be processed and used as nega tive film. Available in 16mm Type 930A only. Photo Prod. Superior 2 Negative Film: An all purpose panchro matic negative stock for both exterior and interior production work. This film has extremely fine grain, medium speed and wide latitude. Available in 16mm Type 936A and 35mm Type 936B. Photo Prod. Superior 3 Negative Film: A high speed, fine grain panchromatic negative stock especially designed for professional motion picture photography. It has wide latitude for both interior and exterior use under limited illumination. Available in 16mm Type 937A and 35mm Type 937B. Photo Prod. Superior 4 Negative Film: A super-sensitive pan chromatic negative film recommended for both in terior and exterior use wherever limited illumination levels prevail. Its special sensitivity and fine grain structure permit the use of reduced apertures where increased depth of field is desired in television and 119 DUP210011264 PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cont.) theatrical motion picture production. An excellent film for high speed photography. Available in 16mm Type 928A and 35mm Type 928B. Photo Prod. Leader Stocks--Cronar Plain 0.004-in. Base Cronar Polyester Photographic Film-Safety Plain 4S: For developing machines. Available in 16mm Type P40A and in 35mm Type P40B. Photo Prod. fine grain release positive. Reduction of contrast through emulsion manufacturing techniques rather than through use of yellow dye gives this material a decided speed advantage over dyed materials and much greater resistance to scratches and abrasions. Type 828A is excellent for making low contrast TV release prints. Available in 16mm Type 828A and 35mm Type 828B. Photo Prod. 1rju. ic. ity.. pAe.mt__a__se_ nro. sinve rum -- v*r.o...n....a....rf$w\ Plain 0.004-in. Base Leader Stocks--Cronar Plain 0.007-in. Base Cronar Fine Grain Release Positive Film: Same Cronar Polyester Photographic Film-Safety Plain emulsion as 825 Type. Especially suited for continuous J 7S: For developing machines. Available in 16mm projection prints where long wear and freedom from Type P70A and in 35mm Type P70B. Photo Prod. brittleness and perforation tearing are important. Also used for oscillograph recording. Available in Leader Stocks--T/A 0.0055-in. Base 16mm Type 225k, 35mm Type 225B and 70mm Type 225E. Photo Prod. Safety Black 5S Leader Stock: For daylight loading rolls, also "A" and "B" roll printing leader. Available in 16mm Type T13A and in 35mm Type T13B. Photo Prod. Safety Exposed Rawstock 5S Leader Stock: For leaders and trailers on motion picture reels and "A" and "B" roll printing inserts. Available in 16mm Type T71A and in 35mm Type T71B. Photo Prod. Safety Duplicating Film--Cronar Plain 0.0045-in. Base Cronar Fine Grain Duplicating Positive: Same emulsion as 828 Type. Ideal for applications where medium contrast duplicates are required without sacri ficing printing speed. Used for duplicating aerial negatives where dimensional stability is important, such as in aerial mapping. Available in 70mm, 5", 6.6" and 9!6 " Type 228 R. Photo Prod. Safety Release Positive Films-- T/A Plain 0.0055-in. Base Release Positive High Speed Film: A high speed positive emulsion for special release work where ap proximately twice regular print positive speed is re quired. Available in 35mm Type 803B. Photo Prod. Fine Grain Release Positive Film: For general re lease work and dubbing prints which require the optimum of picture and sound quality. Image color is blue-black. Inherent noise level is exceptionally low. Emulsion is very hard with high scratch resistance and is coated on a base of long-wearing quality. Available in 16mm Type 825A, 35mm Type 825B, 32mm Type 825C and 35mm perforated 32mm Type 825D. Photo Prod. Safety Sound Recording Films-- T/ANH 0.005-in. Base Safety Duplicating Film--T/A NH 0.005-in. Base Fine Grain Panchromatic Duplicating Negative Film: An exceptionally fine grain high resolution emul sion designed specifically for making duplicate nega tives. Available in 16mm Type 908A, 35mm Type 908B and 35mm perforated 32mm Type 908D. Photo Prod. Safety Duplicating Film -- T/A Plain 0.0055-in. Base Fine Grain Master Positive Film: A fine grain posi tive duplicating film which can be processed in normal positive developer. Gammas in the desirable range of 1.50-1.60 are obtained at standard release posi tive developing times. This film has sufficient speed to permit printing in the same exposure range as Sound Recording Film: A high speed variable area or variable density recording film. Use positive devel oper for VA and negative developer for VD work. Available in 16mm Type 802Aand 35mm Type 802B. Photo Prod. Fine Grain VA Sound Recording Film: An improved variable area sound recording film combining fine grain and maximum sensitivity. NH base reduces flare. Available in 35mm Type 833B. Photo Prod. Safety Special Purpose Films-- T/A Plain 0.0055-in. Base Fine Grain Low Contrast Positive Film: A low con trast, fine grain emulsion designed for photographing either negative or positive images on television monitor tubes. Available in 16mm Type 824A end 35mm Type 824B. Photo Prod. 120 DUP210011265 PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cont.) Title Stock Film: A high speed emulsion used in title cameras for regular title card and special effect work. Produces the sharply defined images required. Spe cially perforated to yield maximum steadiness in animation cameras. Available in 35mm Type 805B only. Photo Prod. TV Recording Film: A high speed, low contrast, fine ------------ - 1 nmin amiilciAn i^ocinnfi^ -frvr nkA+rtrtrnrkmn oitkor - --------------. --------------' - " w negative or positive images on television recording tubes. This film is approximately 2Vi times faster than Type 824 and may also be used as a reversal duplicating stock. Available in 16mm Type 834A and in 35mm Type 834B. Photo Prod. PHOTOGRAPHIC CHEMICALS 6-D Film Developer: Recommended for tank develop ment because of its long working life. Especially suit able for making color separation negatives. Powder. Photo Prod. 6-DR Replenisher: A powder replenisher for 6-D Developer. Photo Prod. 10-F Photocopy Paper Fixer: A single powder fixer for all types of papers, films, and plates. Photo Prod. 16-D Film Developer: A fast, clean-working powder developer with long tank and tray life for press, portrait, and continuous-tone graphic arts films. Photo Prod. 16-DR Replenisher: A powder replenisher balanced for use with 16-D. Photo Prod. 18-F Universal Fixer: A single powder hardening fixer for all types of papers, films, and plates. Photo Prod. 21-D Litho Developer: A high contrast, two-part powder for obtaining optimum results with Cronaflex engineering reproduction films and Cronar polyester graphic arts film. Photo Prod. 53-D All-purpose Developer: An all-purpose devel oper for normal black tones with Velour Black Photo graphic Projection Paper, Varigam Variable contrast Photographic Paper, and similar photographic papers. Photo Prod. 55-D Standard Paper Developer: A standard pow der developer. Produces warm professional tones on photographic papers. Can be used at various dilu tions to suit individual preferences. Photo Prod. 57-D Photocopy Paper Developer: A high contrast, cold tone powder for photocopy processing. Espe cially recommended for Photo-Writ and line copy or copytone. PhotoProd. S-B Developer Additive: A powdered formula which intensifies blacks and retards fog when added to developer. Particularly valuable in photocopy work. PhotoProd. Cronalith Development Control Solution: Instantly halts development on lithographic films, which can be safelight-inspected and returned to the developer. Development in local areas is possible with a cotton swab. PhotoProd. Cronalith LithoFixer: Aconcentrated liquid fixer which is diluted with water for use with ortho litho films. Photo Prod. Cronalith Litho FixerReplenisher: A liquid re plenisher for Cronalith Litho Fixer. Photo Prod. Cronalith Liquid Developer: A high contrast liquid developer with excellent tray life and wide range development latitude. It consists of two concentrated solutions diluted with water for immediate use with ortho litho films. Photo Prod. Cronalith Liquid Developer Replenisher: A liquid replenisher for Cronalith Liquid Developer. Photo Prod. Cronapress Processing Chemicals: Necessary den- sifying and stabilizing solutions for processing Crona press Conversion Film. Photo Prod. Cronar Rotofilm Chemicals: A powdered developer and fixer for processing rotofilm. Photo Prod. Lino-Writ Developer: A special fast-acting formula designed for processing photorecording papers in con ventional processing systems. Photo Prod. Lino-Writ Direct Writing Paper Processing Kit: In powder form for developing and stabilizing oscillo grams on Du Pont's direct writing photorecording papers in rapid oscillogram processors. Photo Prod. Lino-Writ DW Liquid Kit Type 1 : Liquid chemicals for processing unphotolyzed records on direct writing oscillograph papers. Photo Prod. Lino-Writ DW Liquid Kit Type 2: Concentrated liquid chemicals for permanizing photolyzed records on direct writing papers. Photo Prod. Lino-Writ High Speed Stabilization Chemicals: For high speed processing of Lino-Writ 201, 202, and 203 at rates up to 200 feet per minute. In powder form. Photo Prod. Lino-Writ Rapid Access Photorecording Developer: For processing Lino-Writ Photorecording Papers in rapid-access type oscillograph machines. Photo Prod. 121 DUP210011266 PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cont.) Lino-Writ Rapid Processing Chemicals Kit: For rapid processing of Du Pont Lino-Writ 1, 2, 3, and 4 in stabilization processing equipment. Photo Prod. Lino-Writ Rapid Processing Kit: Concentrated liquid chemicals for processing Lino-Writ 1, 2, 3, and 4 and similar papers in stabilization processing equipment. Photo Prod. Screen Process Chcmictilsi A powder' developer and activator that are mixed into solution for processing Du Pont screen process film. Photo Prod. PHOTOGRAPHIC PAPERS B and W Mural Paper: A developing-out photo graphic paper with full projection speed supplied on a white rough-luster medium-weight stock which minimizes retouching, scratches and grain. Widely used for making photo murals as well as portrait proofs. Available in contrast grades 2 and 3. Photo Prod. High Speed Varigam Variable Contrast Photo graphic Paper: Designed especially for the pro fessional photographer, this paper combines the ad vantages of complete contrast control with ex ceptionally high projection speed, approximately twice that of regular Varigam. High speed Varigam is available in eight single and double weight surfaces: A - White Semi-Matte S.W. AL - White 5emi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. WPS - White Water Resistant Semi-Matte S.W. Photo Prod. Varigam Variable Contrast Photographic Paper: Providing in one emulsion complete contrast control, Varigam has projection speed but may easily be adapted to contact printing. Exposure to blue light renders a print of hard gradation and exposure to yellow light, a print of soft gradation. A full range of contrast may be obtained by changing the color of the printing light. Blue, yellow and intermediate colored optical plastic filters are available for easy use. Varigam is available in nine surfaces: A - White Semi-Matte S.W. AL - White Semi-Matte Document W. B - White Semi-Matte D.W. BT - White Semi-Gloss D.W. DL - Velvet Grain Natural White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. R - White Glossy S.W. T - White Glossy D.W. Y - White Silk Texture D.W. Photo Prod. Varilcur Variable Contrast Photographic Paper: A fast projection paper designed for mass production use. The contrast of Varilour can be raised or lowered to produce prints of uniform high quality from negatives which vary widely in contrast. This paper will produce warm black prints and will tone well in conventional direct polysulfide toners. Avail able surfaces: A - White Semi-Matte S.W. DL - Velvet Grain Natural White Luster D.W. R - White Glossy S.W. T - White Glossy D.W. W - Brilliant White Glossy S.W. X - White Silk Texture S.W. Y - White Silk Texture D.W. Photo Prod. Velour Black Photographic Projection Paper: An enlarging paper noted for high speed in exposure and remarkable fidelity to negative scale as well as simplicity in handling. Velour Black is made in four degrees of contrast for all uses in portrait, commercial, industrial and illustrative photography as well as photofinishing. It is furnished in the following surfaces: A - White Semi-Matte S.W. Grades 1, 2, 3, 4 AL - White Semi-Matte Document W. Grades 1,2,3 B - White Semi-Matte D.W. Grades 1, 2, 3 BT - White Semi-Gloss D.W. Grades 2, 3 DL - Velvet Grain Natural White Luster D.W. Grades 1, 2, 3, 4 DS - Velvet Grain Natural White High Luster D.W. Grades 2, 3 R - White Glossy S.W. Grades 1,2, 3, 4 T - White Glossy D.W. Grades 1, 2, 3, 4 Y - White Silk Texture D.W. Grades 1, 2, 3 Photo Prod. Warmtone Photographic Projection Paper: An en larging paper which yields images of a warm brown color. Although designed for projection prints, it is adapted easily to contact printing by reducing the intensity of the printing light. Available in six surfaces, double weight only: DDL - Natural White Rough Luster D.W. DL - Velvet Grain Natural White Luster D.W. DLW - Velvet Grain White Luster D.W. DS - Velvet Grain Natural White High Luster D.W. Y - Natural White Silk Texture D.W. ZL - Artweave, Natural White Rough Cloth Texture D.W. Standard formulas for projection papers are Du Pont 53-D and 55-D Developers obtainable in ready-to-use form. Du Pont 18-F Universal Fixer is recommended. Photo Prod. 122 Tt i DUP210011267 PHOTOGRAPHIC PHOTOGRAPHIC PRODUCTS (Cont.) PHOTORECORDING FILMS Cronar Recording Film: A high speed, blue-sensitive emulsion on 0.004-in. polyester photographic film base. Retouchable surface. Designed for use in high speed oscillographic cameras and related photo recording equipment. Photo Prod. Lii'16-r'ex 1 Recording Film: A blue-sensitive emulsion on Cronar polyester photographic film base for use in oscillographic recording equipment. Supplied in Type B (0.004-in. base) and Type W (0.003-in. base). Photo Prod. Radiographic Products: See Radiograph Products (Includes X-Ray Film [Medical, Dental and Industrial]; Dosimeter Films; Fluorography Films; X-Ray Processing Chemicals; Stainless Intensifying Screens; Fluoroscopic Screens; Screens For Miniature Radiography; Diffrac tion Filters.), pages 132 to 134. PRINTING PLATES Dycril Photopolymer Printing Plates: A photo sensitive plastic bonded to steel, aluminum or Cronar polyester film base supports. Exposure to an ultra violet light source renders exposed areas insoluble to a subsequent mild alkaline washout solution so that a relief image of the exposed pattern remains. Depth of image is dependent on the thickness of the photosensi tive plastic layer. There are eight types available: TYPE C--Total thickness of 0,017 in., relief depth of 0.008 in., backing of 7-mil Cronar. Available in sizes up to 41 % x 5016 in. Photo Prod. Ty pe 25-Total thickness of 0.025 in., relief depth of 0.010 in., backing of flexible steel. Available in sizes up to 40Vi x 76 in. Ty pe 30-Total thickness of 0.032 in., relief depth of 0.016 in., backing of flexible steel. Available in sizes up to 4016 x 76 in. Ty pe 60-Total thickness of 0.062 in., relief depth of 0.040 in., backing of flexible steel. Available in sizes up to 4016 x 76 in. Ty pe 69--Total thickness of 0.069 in., relief depth of 0.038 in., backing of semi-rigid steel. Available in 9 x 12 and 18 x 24 inch size only. Primarily for use in the export market. Ty pe 152-Total thickness of 0.152 in., relief depth of 0.040 in., backing of rigid aluminum. Available in standard 18 X 24 in. size and in some special sizes up to 22 x 28 in. TYPE 180-Total thickness of 0.180 in., relief depth of 0.040 in., backing of rigid aluminum. Available in standard 18 X 24 in. size and in some special sizes up to 22 X 28 in. TYPE 240-Total thickness of 0.240 in., relief depth of 0.040 in., backing of rigid aluminum. Available in standard 18 X 24 in. size and in some special sizes up to 22 X 28 in. Photo Prod. SHEET FILMS Cronar Arrow Pan: A high-speed film with high red sensitivity which gives greatest speed advantages in incandescent light and excellent color correction by daylight and by daylight fluorescent linhtmg. Photo Prod. Cronar High Speed Pa n: Combines high speed with balanced color sensitivity. Suitable for all high speed portrait, commercial and press work, but particularly adaptable for electronic flash lighting. Photo Prod. Cronar Press: Extremely fast film designed for press photography. Wide exposure and development lati tude for optimum response under difficult lighting conditions. PhotoProd. Cronar X-F Pan: A general purpose film possessing medium speed andcorrectly balanced sensitivity to all colors. PhotoProd. All sheet films are coated on nonhalation Cronar base. Du Pont 16-D Film Developer and 16-DR Re- plenisher are recommended for processing. These are available in packaged form. PhotoProd. SPECIAL PRODUCTS AdluxTM Photographic Film for Transparencies: A transparent safety base film an Cronar polyester photographic film base coated on both sides with Velour Black photographic projection paper emulsion in which a diffusing medium has been incorporated. Used in making prints for viewing by transmitted light. Photo Prod. Cronapaque Print Film: A white semi-opaque film for making prints that can be viewed by either re flected or transmitted light. It has a high speed variable contrast emulsion on 0.007 in. Cronar poly ester photographic film base and yields crisp, rich black continuous tone prints from negatives of widely varying contrasts. Photo Prod. Cronapress #100 Clarifier: Machine needed to clarify Cronapress conversion film. For use in con verting from engravings, electrotypes and other types of relief printing plates. Photo Prod. DP-480 Amber Sheeting: For use when exposing Cronar direct positive films. Photo Prod. Image Control Solution: A liquid concentrate for a pre-drying treatment of photographic papers to pre serve warmth and image quality. Photo Prod. 123 DUP210011268 PHOTOGRAPHIC-PIPE PHOTOGRAPHIC PRODUCTS (Cont.) Matte Lacquer: A fast-drying liquid for renewing the matte surface of Cronaflex engineering reproduction and drafting films. Photo Prod. Plastic Filters for use with Varigam and Varilour Variable Contrast Photographic Papers: Mounted plastic filters consist of a 2/2 -in. square block plastic frame with a numbered tab and a 2 Vs-in. circular optical plastic filter aperture. Sets of five and ten filters are available, packaged in a red plastic box. A black, molded plastic filter holder which attaches to enlarger lens barrel and a simplified instruction form which contains a filter selection chart are included with the basic (5-A) and complete (10-C) sets. Indi vidual mounted filters and unmounted sheets of filter material are also supplied on special order. Photo Prod. S-55X Safelight: An orange-brown color safelight which is satisfactory for all sensitized papers, both enlarging and contact including Varigam. It com bines maximum safety from light fag with maximum eye comfort. Prints viewed by this light during proc essing show a quality comparable to that under white light inspection. Photo Prod. PHOTOMETRIC ANALYZER: See Instruments, page 95. PHOTOPOLYMER PRINTING PLATES: See Photo graphic Products, Printing Plates, Dycril Photopolymer Printing Plates, page 123. PHOTO-WRIT PHOTOCOPY PAPER: See Photogra phic Products, Industrial and Graphic Arts Papers, page 118. PHTHALOCYANINE PIGMENTS: See Pigment Colors, Monastral, below. PICRAMIC ACID, SODIUM SALT: Sold as Sodium picramate Technical, a Chemical Intermediate. Orchem D. & C. PICRIC ACID P: Crystalline paste form; a Chemical Intermediate. Orchem D. & C. PICRIC ACID TECHNICAL: 2,4,6-Trinitrophenol. Cry stalline paste form; a Chemical Intermediate. Orchem D. & C. PIGMENT COLORS: Finely divided colored chemical pigments of organic and inorganic types in dry and paste forms. Many hues in each of the following broad classifications are available to the pigment consuming industries: Afflair Flake Pigments Alkali Resistant Reds--Naphtha Diazo Pigments Arylide Reds and Maroons--Naphthanil Diazo Pigments AuricTM Brown Benzidine Yellows Bon Reds and Maroons Chrome Oranges Chrome Yellow Copper Maroon Daiamar Azo Yeiiow Duol Carmine Durable Nonbleeding Reds and Maroons--Pre cipitated Diazo Pigments Ferric Oxide, Hydrated (See AuricTM, abovej Green-Gold--Durable Organic Yellow Indanthrone Blues Lithol Rubine Molybdate Oranges Molybdate Red Monastral Pigments--Phthalocyanine, Blue Monastral Pigments--Phthalocyanine, Green Monastral Pigments--Reds, Violets, Scarlet and Ma roon Organic Oranges Diazo Pigments Parachlor Red Permanent Red 2B(See WatchvngTM, below) Phosphomolybdic Acid Colors--Basic Dye Complex Phosphotungstic Acid Colors--Basic Dye Complex Pigment Green B Pigment Scarlet Platinum-Violet--Durable Shading Pigment RamapoTM Lightfast Blue and Green Pigments Toluidine Reds and Yellows Victoria Blue WatchungTM Red Pigments--Precipitated Diazo Pigment Water Dispersible Colors--Organic and Inorganic Zinc Yellow--Basic Zinc Potassium Chromate USE: As coloring or compounding materials in paints, lacquers, enamels, printing inks, leather, linoleum, floor tile, coated fabrics, plastics, rubber, fancy coated paper and wallpaper. (Also see Ceramic Products, Pigments, page 27.) Pigments PIGMENTS, WHITE: See Titanium Dioxide Pigments, page 153. PINK 3B TOSYLAMIDE: Sold as 1-Amino-2-methoxy- 4-(p-tolylsulfonamido) anthraquinone Technical, a Chemical Intermediate. Orchem D. & C. PIPE, POLYMERIC: See Aldyl Polymeric Pipe, page 125. Fff DUP210011269 p ip e -p l a s t ic s PIPE, VALVES AND FITTINGS: See Surplus Materials, page 146; Plastics, Delrin Acetal Resin Pipe and Fittings, page 125. PIPERIDINE TECHNICAL: Liquid form; a Chemical Inter mediate. Orehem D. & C. PIPERIDINIUM PENTAMETHYLENE DITHIOCARBAMATE: See Accelerators for Natural and Synthe tic Rubber, 552TM Rubber Latex Accelerator, page 1 PiSTOL POWDER: See Smokeless Powder, page 147. PLASTACELE CELLULOSE ACETATE FLAKE: See Plastics, page 127. PLASTIC COATED FABRICS: See Coated Fabrics, Resin Coated, page 42. ' PLASTIC NETTING: See Vexar Plastic Netting, page 161. PLASTIC SHELLS: See Ammunition, page 11. Acrylic Resin:See Plastics, Lucite Acrylic Resin, below. Alathon Polyethylene Resin: Translucent white granular material. In the finished form it is flexible, extremely tough even at very low temperatures, un affected by moisture and aging, resistant to most chemicals, solvents and greases. Among the lightest of all plastic materials, it has excellent dielectric properties and is tasteless, odorless and nontoxic as a film, it has very low water permeability, but is more permeable to carbon dioxide, oxygen and other gases. Many compositions are available. Base resins differ in density, melt index and molecular weight distribution. In addition, there are additives to im prove surface properties, appearance or weather- ability. USE: Extruded into film and coatings for packaging, building construction, agricultural mulch ing and lining of irrigation ditches and ponds; ex truded onto wire and cable for insulation and jacket ing and into pipe for conveying cold water, corrosive chemicals and food products; injection molded into thousands of objects ranging from ink cartridges for ballpoint pens to garbage cans of 23-gal. capacity; blow molded into squeeze bottles, jars and hollow shapes; thermoformed from heavy sheet into con tainers, trays, housings, etc. A finely divided form is available for applying a resin coating to carpet backs. CONTAINERS: 50-lb. paper bags, 1,000-lb. nonreturn- able corrugated containers, 10,000-lb. returnable collapsible rubber containers, 2,000-lb. unit loads (50-lb. bags) and 120,000-lb. bulk cars. Plastics Aldyl Polymeric Pipe: Plastic pipe made of Delrin acetal resin snugly clad in a jacket of yellow Alathon polyethylene resin. Availability and uses sames as Delrin pipe and standard Delrin pipe fittings. Plastics Butacite Polyvinyl Butyral Resin (Sheeting): Soft pliable sheeting for laminated safety glass. It is highly resistant to heat, light and moisture,- also holds broken pieces of glass together under impact. Available in colorless, gradient band tinted and in several trans- JSE: __ _i_____________________ i__ IIUIITC 9UICIJT yiUJS, UUIICI- resistant glass, shatter-resistant glazings for aircraft, safety shields for television; architectural applications requiring safety, glare control or special color effects. CONTAINERS: 750-ft. rolls in fiber tubes or palletized cartons, widths 10-84 in. Plastics Delrin Acetal Resin--(--OCH2),,: Thermoplastic in form of cylindrical pellets. Supplied in two basic com positions--500 series general purpose injection mold ing resins and 150 series general purpose extrusion resins. Supplied in natural (white) or a number of standard colors. Molded or extruded articles have remarkable combination of chemical and physical properties: High strength and stiffness combined with toughness and resilience over wide temperature range; good dimensional stability in presence of moisture; high heat distortion temperature; excellent resistance to all types of organic solvents; excellent bearing characteristics and good abrasion resistance. LIKELY USES: Injection-molded articles for automotive parts, such as interior hardware, bushings and bearings for suspension and steering linkages, squirrel cage blowers, gears, instrument clusters, fuel pump and carburetor parts; electrical components; pump im pellers; housings and cover plates; showerheads; pen parts; appliance gears; door knobs and lock parts; combs; aerosol containers; extruded articles and shapes--tubing, coated wire, sheeting, blow-molded aerosol bottles. CONTAINERS: 50-lb. bags. Plastics Delrin Acetal Resin Pipe and Fittings: Plastic pipe made of Delrin resin available commercially in nominal diameters of V2 , % , 1, 1 V; , 2, 3 and 4 in. and in several wall thicknesses for different pressure ratings. Also 59 different fittings for these pipe sizes including: couplings, tees, 90 elbows, 45 elbows, 45 laterals, reducers, end caps, nipples, flange assemblies and unions. USE: Oil field applications, such as flow-lines, gathering lines, water flood lines, salt water disposal lines and down-hole tubing. Gas distribution mains, service lines and insert replace ments to handle manufactured gas, natural gas and LPG fuels. Water distribution (potable and irrigation water), water well casing and electrical conduit. CONTAINERS: Pipe sold in bundles of 3 or 5 lengths of 20 ft., or coils of 500 ft. Fittings sold individually in cardboard cartons or cloth bags. Plastics 125 DUP210011270 PLASTICS PLASTICS (Cont.) barrels; refrigerator parts (door handles, freezing Dymetrol Continuous Precision Forms: Nylon ex truded shapes of high tensile strength and precise caliper tolerances for industrial and engineering uses requiring critical strength and dimensional control. Product, color, shape and package can be designed to meet customer's particular need. Typical use is in compartment doors, decorative medallions). Extruded forms for jewelry, lighting fixtures, large signs, glazing and decorative trim. CONTAINERS: 47-gol. leverpak drums holding 250 lb. of either bead polymer or cube- cut resin, or 275 lb. of "diamond cut"; 1,000-lb. cartons. Plastics various zipper applications and package strapping applications. Plastics Lucite Acrylic Resin Dental Materials and Special Casting Resins: Monomer and granular polymers Herox Nylon Filaments, Level: Natural and black, in a wide range of constant diameters, crimped and uncrimped. Available in round, triangular and I-beam cross sections. Supplied in paper-wrapped hanks (diameter 2 in., length 46 V4 in., weight approximately used in the manufacture of dentures, teeth, crowns and inlays. Casting resins used in embedment casting for decorative effects, specialty items and solid acrylic bowling balls. CONTAINERS: Granular polymer, 51-gal. leverpak drums; monomer, 55-gal. drums. Plastics 4 lb.); in cut pieces, paper-wrapped (diameter 2 in., Lucite Acrylic Sirup: A liquid methyl methacrylate lengths 1 in. through 46Vz in. in increments of 1/16 laminating resin for use with reinforcements such as in.) or in bulk (length 22 in., 24 in. or 26 in.); and in glass fibers, etc. Polymerization is carried out in the the form of multistrand ropes on spools and single presence of catalysts, such as lauroyl and benzoyl strand continuous lengths on spools (returnable metal peroxide. USE: Combined primarily with fiberglass in spools are 12 in. in diameter; each spool holds ap manufacture of translucent panels for industrial and proximately 5 lb. net weight of filament). Herox residential daylighting and for decorative and archi possesses most of the outstanding properties of tectural building panels. CONTAINERS: 55-gal. drums, Tynex, but is slightly more sensitive to moisture, i.e., tank cars and tank trucks. Plastics Herox is stiffer than Tynex when dry but limper when soaking wet. USE: Filling for personal, house Methyl Methacrylate Monomer-- hold, maintenance and industrial brushes, mechanical CH2C(CH3)COOCH3: Water-white, mobile, volatile street sweeps, fishing leaders and snelled hooks. liquid containing a small amount of polymerization CONTAINERS: Hanks, cut pieces and spools (5) shipped inhibitor. Soluble in most organic solvents, including f in cartons (approximate net weight of filament per hydrocarbons, alcohols, esters and ketones; generally carton 25 lb.) and bulk boxes(approximate weight a good solvent for methacrylate polymers. Poly 40-50 lb.). Plastics merizes to solid product under influence of light, heat Lucite Acrylic Monomer H 100: A specially manu factured grade of methyl methacrylate. USE: In the manufacture of cast acrylic sheets. CONTAINERS: In sulated tank trucks. Plastics or catalysts. Can be copolymerized with other meth acrylate esters and with styrene, vinyl chloride, vinyl acetate, vinylidene chloride, butadiene, acrylonitrile, other acrylic esters, methacrylic acid, acrylic acid, maleic acid esters and many other monomers. USE: Lucite Acrylic Resin(Injection Molding and Extru sion Powders): Thermoplastic in rhomboidal cube cut (for injection molding and extrusion); in minute spherical granules (for compression molding). The injection and extrusion grades are available in trans parent water-white and a range of transparent, trans lucent and opaque colors. The spherical granules are available in uncolored forms only. Molded and ex truded articles have outstanding crystal transparency Base material for the manufacture of cast acrylic sheets, rods, tubes and various shapes. Acrylic sheets are used extensively in sign and lighting which require outstanding resistance to deterioration by natural and artificial light and exposure to weather. It is also used as a comonomer to increase the weather resistance of polyester resins. CONTAINERS: 5-gal. cans, 55-gal. drums, 8,000-gal. tank cars and tank trucks. Plastics in clear form; exceptional outdoor stability; "light piping" and "edge lighting" qualities; shatter re sistance; dimensional stability; lightness of weight. Three grades are available (each with its counterpart in the spherical granule form): Soft-, medium- and Methacrylate Polymers: See Resins (not molding), Lucite, page 136. Nylon Filaments: See Plastics, Herox above, Nylon Monofilaments, below and Tynex page 128. hard-flow. The hard-flow formulation is recommended whenever heat resistance is important in the end use. USE: Molded by injection or compression methods for Nylon Molding Powders: See Plastics, Zytel Nylon Resin, page 128. ; jl automotive parts (horn buttons, instrument dials, taillight lenses, decorative medallions, reflectors); lighting Nylon Monofilaments: Monofilaments are available in sizes from 3-100 mils. They are produced from a :I fixtures; signs; combs and brush backs; pen and pencil series of nylon polymer compositions varying in phys- | 126 DUP210011271 PLASTICS PLASTICS (Cont.) ical properties, shape and color. Typical applications are filaments for brushes (See Herox and Tynex nylon filaments in this section.); fishline, wigs, hose reinforcement, hat banks, shoe last support, scour pad base, sewing thread and woven products such as clothes fasteners, filter fabric and four-drinier screen. Plastics Nylon Oriented Shapes: See Plastics: Dymeiroi Continuous Precision Forms; Herox Nylon Filaments, Level; Nylon Monofilaments; Stren Monofilament Fishing Line Products and Tynex Nylon filaments. Tapered and Level, in this section. Nylon Resins, Soluble: See Resins (Not Molding), Zytel Nylon Resin, page 137. Plastacele Cellulose Acetate Flake: Fine white powder, the raw material for a wide variety of mold ing powders, films, sheets, rods and tubes. Can be compounded with suitable plasticizers and a broad spectrum of colors to give products of exceptional toughness. Clarity and color are very good. Flame resistance, electrical properties and outdoor life are good. Resistance to many chemicals, especially oils, is outstanding. TYPICAL USES: Include molded electrical parts, appliance housings, ladies' shoe heels, personal articles, toys, beads, tool handles. Film is used in packaging, photography and sound recording. Sheet is good for vacuum-formed packages and displays. Blown bottles and extruded tubing are used in pack aging. CONTAINERS: 50-lb. paper bags. Plastics Polyethylene: See Plastics, Alathon Polyethylene Resin, page 125. Rulan Flame-Retardant Plastic for Electrical Insulations: A white granular material specially de veloped for the electrical industry to meet the need for a good dielectric with flame-retardant character istics. Does not support combustion or drip when heated above the melting point; electrical properties approach those of Alathon polyethylene resin. USE: Extruded as insulation for many types of wires and cables where flame resistance is important; injection molded into components for radio, television and tele phone. Co n t a in e r s : 50-lb. paper bags. Plastics Stren Monofilament Fishing Line Products: Spe cially processed high strength, limp and low elonga tion monofilaments for use as spin fishing line in breakloads from 2-30 pound test, and oval casting, surf and trolling lines in breakloads from 10-60 pound test. Packaged in plastic boxes containing one or more 50- and 100-yd. spools and service spools containing 1200-3600 yd. Product line includes in dividually packaged knotless tapered leaders and level leader packs in a complete range of sizes. Sold only through authorized agents. Plastics Surlyn A, lonomer: High molecular weight thermo plastic polymer produced as a granular material. Can be extruded into film, sheet, coatings, injection molded, blow molded, or thermoformed. In the finished form it is flexible, transparent, grease re sistant, and among the lightest of all the plastics. Plastics Teflon FEP-Fluorocarbon Resin (Extrusion and Molding Powder): Clear Vs -in. bead-cut pellets suitable for melt extrusion, compression and injection molding. Capable of continuous service up to 200C.; outstanding electrical properties; unaffected by vir tually all solvents and chemicals; excellent low temp erature toughness; good resistance to adhesions. USE: Extruded insulation for high frequency and high tem perature wire and cable, jacketing and core for co axial cables, chemical and electrical tubing, molded electrical components, such as tube sockets, hermetic seals, connectors, bearings, seals and gaskets. CON TAINERS: 5-, 50- and 100-lb. fiber containers. Plastics Teflon FEP-Fluorocarbon Resin (Aqueous Disper sion): Clear liquid consisting of minute particles of fluorinated ethylene propylene resin (53-57% solids by weight) in water with small amount of wetting agent. USE: Cast film, coated glass fabric for electrical insulation and nonadhesive sheets and tapes; gaskets, impregnates of asbestos; wire enamels for magnet wire. CONTAINERS: 1-, 5- and 30-gal. drums. Plastics Teflon TFE-Fluorocarbon Resin (Aqueous Disper sion): Milky white liquid consisting of minule particles of tetrafluoroethylene resin in water (60% solids) with small amount of wetting agent. Offers fundamentally the same properties as Teflon molding powder, with the application advantages of the liquid form. USE: Cast film for capacitor layer insulation; coated fabric and laminates for electrical insulation, nonadhesive sheets, gaskets; impregnated asbestos fabric and braid for gaskets and packing; finishes for nonad hesive coatings,- wire enamels for magnet wire; blends with other resins and fillers. CONTAINERS: 1-, 5- and 30-gal. drums. Plastics Teflon TFE-Fluorocarbon Resin (Extrusion Pow der): White powder, specially manufactured for proc essing in a modified extrusion technique involving the use of organic extrusion aids. Properties similar to those of Teflon molding powder. USE: Extruded as tape, tubing, wire insulation and shapes, for use in chemical hose, tubing and lined pipe, gasket stock, insulation on aircraft, and electronic hookup wire, tape-wrapped insulation. CONTAINERS-. 4-, 18- and 50-lb. containers. Plastics 127 DUP210011272 PLASTICS-POLYAC PLASTICS (Cont.) Teflon TFE-Fluorocarbon Resin (Molding Pow ders): White granular powder of small particle size. Unaffected by practically all chemicals and solvents; outstanding electrical properties; capable of con tinuous service at 500F. (260C.); good low tempera ture toughness; unique resistance to adhesion of practically all sticky materials. USE: Molded, extruded or fabricated from sheet or rod stock as gaskets, pack ing, mechanical seals, bearings; spacers for coaxial cables, inserts for coaxial connectors, tube sockets; insulation for high frequency, high temperature and high voltage wire and cables; high quality wrapping tape for insulation in motors, generators and con ductors; nonadhesive surfaces for bakery rolls, sealing plates and guides on packaging machinery; candy molds. CONTAINERS: 5-, 10-, 25-, 35-, 100- and 200-lb. fiber containers. Plastics Tynex Nylon Filaments, Level: Natural, black and colors in a wide range of constant diameters, crimped and uncrimped; available in round and triangular shape. Supplied in paper-wrapped hanks (diameter 2 in., length 46/2 in., weight approximately 4 lb.); in cut pieces, paper-wrapped (diameter 2 in., lengths 1 in. through 46'/2 in. in increments of 1/16 in.); and in the form of multistrand ropes on spools and single strand continuous lengths on spools (returnable metal spools are 12 in. in diameter and each spool holds approximately 5 lb. net weight of filament). Tynex is tough and strong; resistant to abrasion, heat, moisture, petroleum products, alkalies and dilute acids. Has excellent bend-recovery and flex-life. USE: Filling for personal, household, maintenance and in dustrial brushes. CONTAINERS: Hanks, cut pieces and spools (5) shipped in cartons. Approximate net weight of filament per carton: 25-lb. minimum. Plastics Tynex Nylon Filaments, Tapered: Black, with an essentially uniform taper from butt to tip. USE: Primarily in paintbrushes. Paintbrushes made of Tynex can be used with all paints, hold and spread paint well and are easy to clean. CONTAINERS: Boxes containing bundles, 25-lb. minimum. Plastics Vespel Diamond Abrasive Wheels: Industrial diamond grinding wheels formulated with new, high temperature polyimide binder. A broad number of types and sizes of wheels are available in the full range of grit sizes and diamond concentrations. These recently introduced grinding wheels have shown a 2- to 3-fold superiority over competitive products, par ticularly in wet grinding of carbide. Superior surface finish, edge holding and freedom from loading are attendant characteristics. Plastics Vespel Fabricated Parts: Finished parts, based on polymer SP polyimide resin, for mechanical, electrical, and electronic applications are available. Vespel parts are particularly suitable for aerospace used and wherever environments require retention of properties at high temperatures, resistance to atomic radiation and low wear, as well as very good electrical proper ties and low outgassing in ultra-high vacuum. Parts can be tailored also to yield both high and low fric tional characteristics. Plastics Zytel Nylon Resin (Molding Powder): Solid gran ular material, cube-cut or chopped; some types avail able in colors. Several types of nylon are available varying in heat resistance, solvent resistance and flexibility. In general, articles extruded, molded or machined from nylon are tough over a wide range of temperatures, resistant to abrasion, form-stable at high temperatures, strong in thin sections, light in weight and resistant to chemicals and solvents; and have unusual bearing characteristics. USE: Injection molded for automotive parts (interior lenses, light load gears and bearings, fuse holders, insulator bush ings, pedal bushings); coil forms of many types, wire connectors, strain-relief grommets, battery cases; mechanical parts for textile machinery, business ma chines, home movie cameras, electric shavers, house hold appliances; tumblers, combs, brush backs; steriiizable medical items. Extruded as abrasionresistant jacketing for electrical wires and cables and for mechanical cables. CONTAINERS: 25-lb. cans. Plastics Zytel Nylon Resin (Special Extrusion Powder): Solid granular material, cube-cut. Properties similar to molding powders, but with still greater toughness and much higher melt viscosity. High melt viscosity permits the extrusion of shapes to accurate dimensions. USE: Precision-extruded shapes, such as rods, tubing and channels of various design; tough transparent film sheeting; coated flexible materials; blown bottles and other containers. CONTAINERS: 25-lb. cans. Plastics PLATINUMS: See Ceramic Products, page 27; Elec tronic Materials, page 55. PNAOSA (p-NITROANILINE-o-SULFONIC ACID): Sold as 4-Nitroaniiine-2-sulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. POLISHES: Automotive: See Automotive Specialties 7 Products, page 18. Chrome and Metal: See Automotive Specialties 7 Products, page 18. Polishing and Rubbing Compound: See Finishes, Automotive, page 69. 7 Polish: See Automotive Specialties 7 Products, page 20. POLYAC BUTYL RUBBER CONDITIONER: See Ac celerators for Natural and Synthetic Rubber, page 2. DUP210011273 POLYBUTADiENE-POTASSiUM POLYBUTADIENE CAN COATINGS: See Finishes, In dustrial, Tin Decorating Finishes, page 76. POLYESTER FIBER: See Fibers, Synthetic Dacron, page 65. POLYESTER FILM: See Film, Mylar Polyester, page 66. POLYESTER PHOTOGRAPHIC FILM AND FILM BASE: See Photographic Products, Cronar, page 116. POLYETHYLENE FILM: See Film, Polyethylene, page 67. POLYETHYLENE GLYCOL PRODUCTS: See Aikanoi, page 6. POLYETHYLENE RESIN: See Plastics, Alathon Poly ethylene Resin, page 125. POLYIMIDE COATED FABRICS: See Finishes, Indus trial, Synthetic Resin Coated Fabrics and Laminates, page 76. POLYMER FLOOR FINISH: See Professional Floor Maintenance Products, page 131. POLYMER INTERMEDIATES: See Freon Products, page 85. POLYMER PRODUCTS: See Plastics, page 125; Resins (Not Molding), page 134. POLYMERIC FOAMS: See Freon Products, page 85. POLYMERIZATION CHEMICALS FOR NATURAL AND SYNTHETIC RUBBER: DFL No. 3: A solution of buffered phosphate esters. Clear straw-colored liquid; Sp. Gr. 1.05. USE: A lu bricant release agent and corrosion inhibitor for syn thetic rubber driers. CONTAINERS: 450-lb. drums. Elastomers Neozone D Special Rubber Antioxidant: Phenyi- betanaphthylamine-C1oH7NHC6H5-(specially treated). Fine light gray powder; Sp. Gr. 1.24; F. P. not lower than 106C. USE: A stabilizer in the manufacture of synthetic rubber. CONTAINERS: 160-lb. drums. Elastomers SDOC: Sodium Dimethyl Dithiocarbamate. 40% solution in water. Clear light amber to greenish- amber. Sp. Gr. 1.17. USE: As a polymerization short stop for styrene butadiene rubber (SBR). CONTAINERS: 55-gal. drums or bulk. Elastomers POLYOLEFIN FILM: See Film, Clysar Polyolefin Film, page 66. POLY-PARA-DINITROSOBENZENE: See Accelerators For Natural and Synthetic Rubber, Polyac, page 2. POLYPROPYLENE FILM: See Film, Clysar Polyolefin Film, page 66. POLYSULFIDE: See Electroplating Products, page 57. POLYURETHANE CALKING COMPOSITIONS: See Finishes, Trade Sales (Consumer Products), Calking Com positions, page 77. POLYVINYL ACETATE: See Resins (Not Molding), Elvacet, page 134. POLYVINYL ALCOHOL See Resins (Not Molding), Elvanol, page 135. POLYVINYL BUTYRAL RESIN: See Plastics, Butacite, page 125. POLYVINYL FLUORIDE FILM: See Film, Tedlar, Poly vinyl Fluoride, page 67. PONOUTH PIGMENTS: See Dyes,page 54. PONSOL DYES: See Dyes, page 54. PONTACHROME DYES: See Dyes, page 54. PONTACYL DYES: See Dyes, page 54. PONTAMINE DEVELOPERS: See Dyes, page 54. PONTAMINE DYES: S ee Dyes, page 54. PORCELAIN FOR ALUMINUM: See Ceramic Products, page 27. POROMERIC MATERIALS: Corfam poromeric ma terials for all uses other than footwear (See listing under Corfam Poromeric Shoe Upper Material, page 45, for product description): Uses include automotive and furni ture upholstery, luggage, handbags and sporting goods. Also available in grades impregnated with Adiprene urethane rubber or other impregnants for use as oil and abrasion resistant packings and seals. F.&F.-Fabrics PORTABLE MAGAZINES: See Explosives, Blasting Accessories and Supplies, page 60. POTASSIUM COPPER CYANIDE DOUBLE SALT: See Electroplating Products, page 57. POTASSIUM CYANIDE--KCN: A white, granular, poisonous chemical; contains 98.0% min. potassium cyanide. USE: In high-speed copper, gold and silver plating processes; with sodium cyanide for cyanide nitriding. CONTAINERS: 100-lb. steel drums. Electrochem. POTASSIUM SILICATE-GLASS TECHNICAL: Weight ratios Si02:K20-2.1 and 2.5; colorless, anhydrous lump or white powder; soluble in water at elevated tempera ture and pressure. USE: In manufacture of glass, ceramic, refractory materials and welding rods; in manufacture of potassium silicate solutions. CONTAINERS: 500- and 545-lb. drums. Ind.&Bio.-Ind. POTASSIUM SILICATE-SOLUTION-ELECTRONICS 200-TECHNICAL: Filtered, water white solutions having a Si02: K20 weight ratio of 2.07; especially low in heavy metals content. USE: In coating cathode ray tubes with phosphors, in other uses for potassium silicate where a product of superior clarity and purity is required. CON- 129 DUP210011274 POTASSIUM-PROFESSIONAL POTASSIUM (Cent.) TAINERS: 55-gal. polyethylene-lined drums, tank cars and tank trucks. Ind.&Bio.-Ind. POTASSIUM SILICATE-SOLUTION-TECHNICAL: Various ratios of Si02:K20 in water solution; colorless mobile liquid at gravities of 30-40B. Us e-. As a non efflorescing base for inorganic paints and protective coatings; as a coating for roofing granules and welding rods; as a binder in manufacture of carbon electrodes; as an ingredient in flame retardant paints and composi tions. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. POTASSIUM TITANATE, FIBROUS: See Tipersul Fibrous Potassium Titanate, page 153. POULTRY FEED INGREDIENTS: See Nutrition and Therapy Products, Hydan, page 108. Aluminum: See Finishes, industrial, page 74. Black Sporting: See Black Sporting Powder,page 23. Blasting: See Explosives, page 61. Gold: See Ceramic Products, page 27. Loggers: See Explosives, page 63. Pellet: See Explosives, page 59. Rifle: See Smokeless Powder, page 140. Shotgun: See Smokeless Powder, page 141. Silver: See Electronic Materials, page 55. Smokeless: See Smokeless Powder, page 140. POWER-MATEm STUD DRIVER: See Tools, Powder Actuated, page 157. POWER SPRAY SYSTEM: See Professional Floor Maintenance Products, page 131. PRECIOUS METAL COMPOSITIONS: See Ceramic Products, page 27; Electronic Materials, page 55. PREPARAKOTE PRIMER-SURFACER: See Finishes, Refinish, Primers and Primer-Surfacers, Preparakote, page 72. PREP-SOL SOLVENT: See Finishes, Refmish, page 73. PRESERVATIVES, WOOD: See CZC, page 46; Zinc Chloride, page 165. t "PRIMACORD" DETONATING FUSE: See Explosives, Blasting Accessories and Supplies, page 60. jDenotes a trademark of the Ensign-Bickford Company. t'WIMACORD" MS CONNECTORS: See Explosives, Blasting Accessories and Supplies, page 60. PRIMERS FOR BLASTING AGENTS: See Explosives, Blasting Agents, page 62. PRIMERS FOR FINISHES: See Finishes, Automotive, page 69; Finishes, Refmish, page 72; Finishes, Industrial, page 75; Finishes, Trade Sales (Consumer Products), page 81. PRIMER-SEALER: See Finishes, Trade Sales (Consumer Products), page 80. PRIMER-SURFACER: See Finishes, Automotive, page 70; Finishes, Refmish, page 72. PRIMING, KLEANBORE: See Ammunition, page 11. PRIMULINE FUSION MASS 220 TECHNICAL: Pow der form; a Chemical Intermediate. Orchem D. & C. PRIMULINE FUSION MASS 240 TECHNICAL; Pow der form; a Chemical Intermediate. Orchem D. & C. PRIMULINE FUSION MASS 270 TECHNICAL: 2 -{p- Aminophenyl)-6-methyl-2,6'-bibenzothiazole. Powder form; a Chemical Intermediate. Orchem D. & C. PRINT FILM: See Photographic Products, Cronapaque, page 123. PRINTING PLATES: See Dycril Photopolymer Printing Plates, page 123. PRODUCT BCO SURFACE ACTIVE AGENT: C-Cetyl Betaine. An amphoteric product showing cationic prop erties in acid solutions and anionic properties in alkaline solutions. Particularly effective in alkaline peroxide bleaching systems. Orchem D. & C. PRODUCT BDO SURFACE ACTIVE AGENT: C-Decyl Betaine. An amphoteric product similar in properties to Product BCO. Particularly effective in solutions con taining high concentrations of electrolytes. Orchem D. & C. PROFESSIONAL FLOOR MAINTENANCE PRODUCTS: Bacteriostatic Dust Control: A dry mix and dust cloth treating material that improves dust pick up. Aids in efficient floor cleaning and all dusting. Con tains bacteriostat that inhibits growth of germs. Listed by Underwriters' Laboratories, Inc. CONTAINERS: 1-, 5-, 30-, and 55-gal. cans. Available only through dis tributors. F.&F.-Cons.{Spec.) t Denotes a trademark of the Ensign-Bickford Company. 130 1 DUP210011275 PROFESSION AL-PYRAZOLANTH RONE PROFESSIONAL MAINTENANCE PRODUCTS (Cont.) Cordless Floor Machine: A battery-operated floor machine incorporating the Du Pont Power Spray Unit. Low torque and lack of cord permit extremely safe and easy operation during business hours; makes elim ination of night floor maintenance possible. Excellent for supermarkets, hospitals, retail stores. F.&F.-Cons.(Spec.) P|nA Sealer end Undercoat*. A.n odorless water emulsion of acrylic polymer for sealing porous floor surfaces prior to waxing. Enhances floor appearance; protects floors against dirt penetration; makes top coat of wax or finish stretch further. Listed by Under writers' Laboratories, Inc. CONTAINERS: 1-, 5-, 30-, and 55-gal. cans. Available only through distributors. F.&F.-Cons.(Spec.) Du Pont Power Spray System: A three part system of interim floor maintenance for refinishing heavy traffic areas quickly and easily. The three parts include: power spray unit; power spray capsules; cleaner and finish. Available only through distributors. F.&F.-Cons.( Spec.) Floor Wax Remover and All-purpose Cleaner: Con centrated cleaner, removes heavy soil and multiple coats of wax quickly, easily, safely. Free-rinsing, fortified with special emulsifying agents. Contains no fixed alkali or acid that damages floors, nor abrasives and powders that leave residue. Listed by Under writers' Laboratories, Inc. CONTAINERS: 1-, 5-, 30- and 55-gal. cans. Available only through distributors. F.&F.-Cons.(Spec.) High Gloss Floor Wax: Economical, high solids, self polishing wax. Will not yellow or powder. Scuff re sistant, easy to apply and strip. Listed by Under writers' Laboratories, Inc. CONTAINERS: 1-, 5-, 30- and 55-gal. cans. Available only through distributors. F.&F.-Cons.( Spec.) Nylon Floor Pads: Pads designed especially for use with the Du Pont Power Spray System. One-half inch thick, washable, reusable. Diameters from 10-24-in. CONTAINERS: Cases containing ten (10) pads. Avail able only through distributors. F.&F.-Cons.(Spec.) Paste Floor Wax: Cleans and waxes in one operation. Contains Ludox colloidal silica, an antislip ingredient. Listed by Underwriters' Laboratories, Inc. CONTAINERS: 2- and 5-gal. pails. Available only through dis tributors. F.&F.-Cons.(Spec.) Polymer Floor Finish: Nonwax floor finish for heavy traffic areas. Can be buffed. One gallon covers up to 2000 sq. ft. Listed by Underwriters' Laboratories, Inc. CONTAINERS: 1-, 5-, 30- and 55-gal. cans. Available only through distributors. F.&F.-Cons.(Spec.) Slip-Retardant Floor Wax: Offers beauty, durability, economy and safety features. Contains Ludox col loidal silica, an antislip ingredient. Listed by Under writers' Laboratories, Inc. CONTAINERS: 1-, 5-, 30and 55-gal. cans. Available only through distributors. F.&F.-Cons.(Spec.) PROFESSIONAL PAINTER LINE: See Finishes, Trade Sales (Consumer Products), page 82. PROPELLENTS: See Freon Products, page 85; Methyl Chloride and Methylene Chloride, pages 103 and 104. PROTECTIVE AGENTS FOR NATURAL AND SYNTHETIC RUBBER: Copper Inhibitor 50: 50% disalicylalpropylene- diamine-HOC6H4CHNCH2CH(CH3)NCHC6H4OH and 50% aromatic solvent. Amber-colored liquid; Sp. Gr. 0.99. USE: To prevent catalytic action of copper on oxidation of natural and synthetic rubbers. CON TAINERS: 250-lb. drums. Elastomers Heliozone Inhibitor: Blend of selected waxy ma terials. Pale yellow to buff-colored, waxy flakes; Sp. Gr. 0.87. USE: To retard sun checking and cracking of natural and synthetic rubbers. CONTAINERS: 50-lb. boxes. Elastomers Heliozone Special inhibitor: A petroleum wax. White waxy flakes; Sp. Gr. 0.93. USE: To retard sun checking and cracking of natural and synthetic rubbers. CONTAINERS: 50-lb. boxes. Elastomers NBC: Nickel Dibutyldithiocarbamate- (C4H9)2NC(S)S2Ni. Dark green flakes; Sp. Gr. 1.26; M. P. 86C. min. USE: To improve ozone resistance of SBR and nitriles (NBR). It will also improve heat re sistance of neoprene and Hypalon compounds. Not recommended for use in natural rubbers. CONTAINERS: 250-lb. boxes. Elastomers PRO-TEK PROTECTIVE HAND CREAM: See Auto motive Specialties 7 Products, page 20. PRUSSIC ACID: See Hydrogen Cyanide, page 92. PUTTIES: See Finishes, pages 70, 73, 75. PX BOOK CLOTH: See Coated Fabrics, Pyroxylin Coated Fabrics, page 42. PYRALUX FLUORESCENT ENAMELS: See Finishes, Refinish, page 73. PYRAZOLANTHRONE: Sold as Anthra(l,9)pyrazol- 6(2H)-one Technical, a Chemical Intermediate. Orchem D. & C. 131 DUP210011276 PYRE-RADSOGRAPHIC PYRE-Ml POIYIMIDB COA TED FABRICS AND 2-(2-QUINOLYL)-l,3-INDANDIONE: Sold as Quinoph- LAMINATES: S ee Finishes, Industrial, Synthetic Resin thalone Technical, a Chemical Intermediate. -1 t Coated Fabrics and Laminates, page 76. Orchem D. & C. 1 PYRE-M.L. WIRE ENAMELS: See Finishes, Industrial, QUINOPHTHALONE TECHNICAL: 2-(2-Quinolyl)-l,3- Wire Enamels, page 76. indandione. Solid form; a Chemical Intermediate. Orchem D. & C. 4 PYROCORETM IGNITER CORD: A small diameter, l unusually high-velocity igniter cord capable of igniting R i propellent grainsdirectly or intermediate ignition ma- 2R ACID TECHNICAL: 7-Amino-l-naphthol-3,6-disul- tannic AIc a cntle^r+Ari/ fstr tM-Annnntinn n eJAtnnntiAn W, J , V. wviwnuiiwil tonic acid, sodium sait. Paste form; a Chemical inter from point to point with a minimum of damage to adja mediate. Orchem D. & C. cent equipment or devices. Available in various sizes and strengths. CONTAINERS: Various lengths on spools 2R AMINO ACID: Sold as 7-Amino-1,3,6-napththalene- or as special devices having electrical initiators or recep trisulfonic acid, disodium salt Technical, a Chemical tion primers. Explo.-C.P.S. Intermediate. Orchem D. & C. PYROXYLIN: See Nitrocellulose, page 107. PYROXYLIN CEMENTS: See Cements, page 26. RADIATOR CLEANER: See Automotive Specialties 7 Products, page 18. PYROXYLIN COATED MATERIALS: See Coated Fab rics, Fabrikoid, page 42; PX Book Cloth, page 42; Tontine Washable Window Shade Cloth, page 42. Q RADIOGRAPHIC PRODUCTS: Cine Fluorography Film Cine-Ray: 16mm and 35mm (Type 936) film for use in cine fluorography. Photo Prod. QUALEX REFINED SODIUM CMC: Low and high Dental X-Ray Films viscosity. A special grade of sodium CMC developed for use as a fluid loss and viscosity control additive in drilling Dental X-Ray Films have blue safety base, wide expo ,i muds. CONTAINERS: Multi-ply moisture resistant 50-lb. sure latitude, antiabrasion coating over the emulsion bags. Explo.-C.P.S. and positive dot identification. Films come in the ex clusive "Pull-A-Tab" packet, designed for easy opening QUARRYCORD: See Explosives, Blasting Accessories and and handling in the darkroom. Supplies, page 60. Double Coated (D) Film, Type 550: A fast x-ray film QUILON CHROME COMPLEX: A Werner type chrom coated with emulsion on both sides. CONTAINERS: 150 ium complex in isopropanol. USE: As a water repellent packets per box, 1 film per packet (code 150 D-l) and sizing treatment of paper and other cellulosic ma 150 packets per box, 2 films per packet (code 150 D-2) terials; for treatment of leather, glass fibers and siliceous Photo Prod. and other negatively charged surfaces; as an antiblock ing or release agent on kraft, glassine, parchment, cello phane and Mylar; for insolubllizing various water soluble or swellable coatings; for improving the grease anti-crawl of grease resistant coatings and substrates; as a stabilizing treatment for landfowl and waterfowl feathers. CONTAINERS: 15-and 53-gal. drums. Ind.&Bio.-Ind. Lightning Fast (LF) Film, Type 555: A very fast, double coated film having the inherent speed nec essary for use in the long cone technique. It is also used to advantage with low powered x-ray equipment. CONTAINERS: 150 packets per box, 1 film per packet (code 150 LF-1) 150packets per box, 2 films per packet (code 150 LF-2). Photo Prod. QUiNALDINE C TECHNICAL: 2-Methylquinoline. Liquid form; a Chemical Intermediate. Orchem D. & C. No. 3 Bitewing Film, Type 557: An x-ray film coated with emulsion on both sides having the same speed as Type 550. For use in recording on one film the coronal two-thirds of both the maxillary and QUINIZARIN TECHNICAL: 1,4-Dihydroxyanthra- quinone. Solid form; a Chemical Intermediate. mandibular teeth. CONTAINERS: 25 packets per box, 1 film per packet. Photo Prod. Orchem D. & C. 2,4-QUINOLINEDIOL TECHNICAL: 2,4-Dihydroxy- Diffraction Filters quinoline. Paste form; a Chemical Intermediate. For obtaining monochromatic x-radiation in diffraction 1. Orchem D. & C. analysis. Photo Prod. VI-1" 132 I. |! DUP210011277 RADIOGRAPHIC RADIOGRAPHIC PRODUCTS (Cont.) Dosimeter Filins Type 544--2 films per packet Type 545--1 film per packet Type 556--2 films per packet Type 558--2 films per packet Th ese films of different sensitivities are worn by person nel subject to exposure to hazardous radiation for measuring radiation dosages. CONTAINERS: 150 "Pull-A-Tab" packets per box. Photo Prod. Fluoroscopic Screens Type CB-2 : Unique plastic screen for medical and industrial fluoroscopy. Supplied in a wide range of standard and special sizes. Has cleanable surface. Photo Prod. Sc r e e n s f o r Min ia t u r e Ra d io g r a p h y : Type D: Blue fluorescing. Not suited for regular fluoroscopy. Used with special blue sensitive film. Supplied with or without cleanable surface. Photo Prod. Type E-2: Same spectral emission as Type CB-2 for use with special green sensitive film. Cleanable surface. 30-35% more brilliant than Type CB-2. industrial X-Ray Fiims Three special emulsions are produced for the radiog raphy of materials. All are outstanding for their uniformity, abrasion resistance and ability to with stand hot weather processing. Day Pack Films, Types 506 Cronex and 510 Cronex: Available in 200-ft. rolls of 70mm or 5 in. Enclosed in a light-tight paper sleeve to permit han dling and use in daylight. Coated on polyester base. Also available in cut sheets in standard sizes. Photo Prod. Fine Grain Film, Type 506 Cronex: For direct ex posure or exposure using lead screens. Exceptionally fine grain, with wide exposure adaptability to all x-ray voltages and gamma radiation. Available in all standard industrial sizes. CONTAINERS: 100 sheets N.I.F. (Non-lnterleaved Film) and thrift-pak coated on polyester base. Photo Prod. Screen Day Pack: Throw-away dispenser assembly consisting of Type 506 Cronex or 510 Cronex x-ray film, sandwiched between lead intensifying screens. Available in 100-ft. roils in widths of 35mm, 70 mm, 3 % -in. and 5-in. Photo Prod. Screen Film, Type 504 Cronex: For all types of industrial work where intensifying screens are used. Available in all standard industrial sizes. CONTAINERS: Boxes of 100 sheets N.I.F. (Non-lnterleaved Film). Photo Prod. Very Fine Grain Film, Type 510 Cronex: For direct exposure or exposure using lead screens. It has the finest grain of the industrial films and is approximately Vs the speed of Type 506. Especially suited for critical inspection of light metals such as aluminum, mag nesium and their alloys. Also used in the 1,000 22,000 Kv range. CONTAINERS: Boxes of 100 sheets N.I.F. (Non-lnterleaved Film) and thrift-pak. Coated on polyester base. Photo Prod. Intensifying Screens Antistatic Solution: A solution to substantially reduce static electricity in x-ray screens. Photo Prod. Cronex Detail: A special purpose screen designed to reproduce the finest detail possible in screen radiog raphy. Photo Prod. Cronex Hi-Speed: A fast screen reproducing defini tion closely comparable to that of par speed. For general medical radiography where extra speed is essential. Also excellent for low-powered and port able x-ray units. Photo Prod. Industrial: For high speed industrial radiography. Photo Prod. Cronex Lightning Special: A very fast, special purpose screen having high speed, particularly in low kilovoltage range. For use where speed is primary requirement. Photo Prod. Multi-Section Screen Book: A book of 1, 3, 5 or 7 matched pairs of intensifying screens of different speeds for multi-section radiography. Photo Prod. Cronex Par Speed: Standard speed screen for all general medical radiography. Photo Prod. Screen Cleaner: A cleaner specifically formulated for Du Pont intensifying screens. An important bonus benefit is the addition of antistatic solution. Photo Prod. Medical X-Ray Films Du Pont produces three distinctly different x-ray film emulsions for the medical field and all three are on Cronar polyester film base. Cronex I: A medium contrast film with low fog and wide latitude in exposure and processing. Dependable results under a variety of conditions are assured with this fine grain emulsion. Photo Prod. 133 DUP210011278 RADIOGRAPHIC-RESINS RADIOGRAPHIC PRODUCTS (Cont.) Cronex II: A low fog, high contrast film that is ideal for high Kv.P. radiography. This is a medium- speed film that records sharply defined images and maintains rich blacks. Photo Prod. Cronex III: A film for producing clearer, sharper images with short exposures under normal safelight conditions. This high-speed film has an exceptional speed-fog ratio. Photo Prod. Cronar SD: A single-coated blue sensitive film that provides superb contrast control for use in specialized medical x-ray procedures such as mammography and extremity work. Photo Prod. X-Ray Film Processing Chemicals Concentrated CronexTM Chemicals: Liquid concen trated chemicals for processing x-ray films. Developer, replenisher and fixer are each supplied in 1 - and 5-qt. bottles to make, respectively, 1 and 5 gals, of solution. Photo Prod. Concentrated Dental Chemicals: Liquid concen trated chemicals for processing dental x-ray films. Developer and fixer are supplied in 24-oz. bottles to make 1 gal. of working solution. Developer and fixer are packaged in mailing unit called Twinpack. Photo Prod. Powdered CronexTM Chemicals: Powdered devel oper and replenisher and single-powder fixer for proc essing x-ray films. Supplied in package sizes to mix 1,5, 20 and 100 gals, of solution. Photo Prod. RAMAPOTM PIGMENTS: See Pigment Colors, page 124. RANGEMASTER RIFLE: See Arms, page 17. RDX: See Cydotrimethylenetrinitramine, page 46. RED CROSS DYNAMITES: See Explosives, Dynamites, page 63. REDUCERS-SYNTHETIC, ENAMEL, UNDERCOAT: See Finishes, Refinish, page 72. REDUCING AGENTS: See Hydrosulfiie, Cone., page 93; Zepar, page 164. REFRIGERANTS: See Freon Products, page 85; Methyl Chloride and Methylene Chloride, pages 103 and 104. RELEASE AGENTS: See Vydax, page 161; Ze/ec, page 164. REMINGTON AMMUNITION: See Ammunition, page 11. REMINGTON CONSTRUCTION AND INDUSTRIAL TOOLS: See Tools, Construction and Industrial, page 154. REMINGTON FIREARMS: See Arm, page 16. REMINGTON POWDER ACTUATED TOOLS: See Tools, Powder Actuated, page 156. REMINGTON STUD DRIVERS: See Tools, Powder Actuated, page 157. REMINGTON STUNNERS: See Tools, Powder Actuated, page 156. REPELLENTS, ANIMAL: See Seed Treatments, Arasan 42-S, page 138. REPELLENTS, WATER: See Aridex, page 16; Nalan, page 105; Zelan, page 164; Zepel, page 164. RESIDUE AND SLUDGES: See Surplus Materials, page 146. RESIN DISPERSIONS: See MethacrolTM, page 702; Zoron, page 165; Zesef, page 165; Plastics, Teflon,, page 127. RESIN SHEET STOCK: See Plastics, Butacite, page 125. RESINS, MOLDING: See Plastics, page 125. RESINS (NOT MOLDING): Elvacet Polyvinyl Acetate Emulsion: Viscous, milk- white water dispersion of polyvinyl acetate or of copolymers of polyvinyl acetate which can be diluted with water. Films or coatings formed by the evapora tion of water arc thermoplastic, grease-resistant and, in some cases, water-resistant; they exhibit excellent adhesion to a wide variety of materials. The emulsions possess the desirable properties of high solids content at workable viscosity and ease of application from a water medium which eliminates the need for expensive and flammable solvents. Weight per gal. approx. 9.2 lb. Elvacet is available in the following grades: Gr a d e Ty p e Vis c o s it y o f Emu l s io n (Br o o k f ie l d ) Po is e s So l id s Co n t e n t 80-900 81-900 81-1600 81-3300 84-1100 1423 1440 1454 Homopclymer Homopolymer Homopolymer Homopolymer Homopolymer Copolymer Homopolymer Copolymer 8-10 8.5-10 15-17 30-35 9-13 9-15 8-15 9-15 55% min. 55% min. 55% min. 55% min. 54%-56% 55% min. 54%-56% 55% min. USE: Paint vehicles; adhesive base materials for cello phane, wood, paper, cloth, ceramics, leather, cork and metals; binders for paper pulp, sawdust, leather scrap, sand, clay, nonwoven fibers, pigments and 134 DUP210011279 RESINS RESINS {NOT MOLDING) (Cont.) cement; textile finishes and sizes; paper coatings for greaseproofing and heat-sealing. CONTAINERS: 45-lb. steel pails; 500-lb. steel drums; 500-lb. fiber drums; 4,500-lb. liquid bins; 37,000-75,000-lb. tank cars; 19,000-32,000-lb. tank trucks. Electrochem. Elvacet Polyvinyl Acetate Solution (Elvacet 60-05): Colorless, odorless synthetic resin available as a 60% solution in iTietnCuTol. The resin is thermo plastic, stable to light and heat, soluble in a number of organic solvents and compatible with many resins and plasticizers. Because of its strong adhesion to most types of surfaces and excellent heat-sealing properties, polyvinyl acetate is widely used in adhesive and binder applications. USE: Adhesive and binder; vehicle for metallic pigments; protective coatings on metal; heat-seal applications; grease-proofing; stiffen ing and permanent sizing. CONTAINERS: 38-lb. pails and 400-lb. drums. Electrochem. Elvanol Polyvinyl Alcohol: Water-soluble synthetic resin; white to creamy-white powder; odorless; pH 6--8; density 1.21 -- 1.31 at 20C. Available in ten grades covering various degrees of hydrolysis in three viscosities (high, medium and low). Gr a d e Vis c o s it y o f 4% Wa t e r So l u t io n a t 20C. (CP) % Hy d r o l y s is 72-60 72-51 50-42 71-30 71-24 52-22 41-24 70-05 51-05 51-03 55-65 45-55 35-45 28-32 23-28 21-25 22-26 4-6 4-6 1.8-3.0 99 -100 97.7- 98.4 87 - 89 99 -100 97.7- 98.4 87 - 89 80 - 83 99 -100 88 - 89 88 - 90 Polyvinyl alcohol solutions are stable over long periods of time. Films and coatings from these solutions are exceedingly tough, colorless, unaffected by all oils, greases, fats, hydrocarbons and most organic solvents, and possess a high degree of impermeability to gases and air. USE: Textile warp size; size for nylon and rayon knitting yarns; pigmented paper coating binder; greaseproofing paper; paper size; top size on paper board for high gloss printing; wet strength paper laminating adhesive; nonblocking, remoistenable ad hesive,- adhesive and binder for leather, cloth, non- woven fabrics and paper; pigment binder; temporary protective coatings; molded products; emulsifying agents; emulsion stabilizer and thickener; photo sensitive films; chemical intermediate. CONTAINERS: 10- and 25-lb. fiber cartons; 50-lb. multi-wall bags; i r\r\ il m____ I____ IV4U-ILJ. liuictl biova i v v mCim . Elvax Vinyl Resins: A series of ethylene/vinyl acetate copolymers for heat-sealable functional and decorative coatings and for hot-melt adhesives. Trans lucent, white, free-flowing spherical pellets. Highly compatible with waxes and many resins and rosins; soluble in benzene, xylene, toluene, trichlorethylene, and tetrahydrofuran; insoluble in most polar solvents. Available in eight grades: GRADE PRINCIPAL PROPERTIES AND USES Elvax 40 Medium-low viscosity resin with optimum solubility in organic solvents. Compatible with nitrocellulose, rosins, and many resins; shows limited compatibility with waxes. Used to improve flexibility and adhesion of lacquers and specialty inks and in pressure-sensitive, solvent-based, and specialty hot-melt adhesives. Elvax 150 Medium viscosity resin with high specific adhesion to aluminum foil and other nonporous surfaces. Mare soluble in organic solvents than 200ond 400-scries Elvax resins, bul less compatible with petroleum waxes. Used in solvent-applied coatings and hot-melt adhesives. Elvax 220 Low viscosity resin for use where application equipment imposes viscosity limitations. In blends with wax, less flexible than lower melt index 200-series resins, but essentially equivalent in seal strength and grease resistance and superior in gloss retention. Elvax 240 Specialty resin similar in properties and uses to Elvax 250, but lower in molecular weight. Equivalent to Elvax 150 in effect on melt vis cosity of wax blends. Elvax 250 General-purpose resin with optimum balance of properties for most coating and adhesive applications. Broadly compatible with waxes, resins, and rosins. In blends with wax, provides excellent toughness, flexibility, and adhesion without impairing barrier properties. Elvax 260 High molecular weight resin for use where maximum toughness, hot tack, and flexibility are required. Shows high melt viscosity in blends with wax. Preferred grade for use in heat-seal barrier coatings for form-fill bag packaging. Elvax 420 Low viscosity, lower cost resin for use in hot-melt coatings and ad hesives. In EIvax/wax coatings, gives optimum gloss and gloss re tention, improved surface hardness, and excellent resistance to block ing. Recommended as replacement for low molecular weight polyethylene in wax blends to obtain improved heat-seal strength. Where improved flexibility is also required, substitute Elvax 220. Lower cost, high molecular weight resin for use in flexible reinforced wax coatings where high melt viscosity can be tolerated. Recommended resin base far hot-melt adhesives and heat-sealable coatings where the end use does not require the flexibility and seal strength attainable with Eivax 26a. Electrochem. Vinyl acetate content, wt. %..................................................... Inherent viscosity at30aC. (0.25 g/100 ml toluene)......... Melt index, g/10 min. (A5TM D 1238, modified)................ Tensile strength, p.s.i. (A5TM D 882 1)................................ .. Elongation at break, % (ASTM D 882 1).............................. Elastic (tensile) modulus, p.s.i. (ASTM D 882 1)................... Density, g/cc at 23C. (ASTM D 1505)................................... Bulk density, Ib./cu. ft..................................................................... Hardness, Shore A-2 durometer, 10 sec. (ASTM D 1706). Softening point, ring and ball, F. (ASTM E 28)................ LVAX 40 ELVAX 150 El v ax 220 ELVAX 240 ELVAX 250 ELVAX 260 ELVAX 420 El v a x 460 40 0.70 55 760 1300 320 0.965 30 35 200 33 0.78 25 1000 700 800 0.957 33 67 240 28 0.63 150 550 1000 825 0.949 33 67 190 28 0.78 25 1000 700 1475 0.951 34 72 250 28 0.85 15 2000 750 1475 0.951 33 72 280 28 0.90 3.0 2900 950 1600 0.954 34 80 310 18 0.54 150 850 550 2750 0.937 33 83 210 18 0.92 2.5 2750 850 3500 0.941 29 88 390 135 DUP210011280 RESINS Nr RESINS (NOT MOLDING) (Cont.) 2009,2010, 2041, 6010, 6011,6012), methyl copoly mer-- (Lucite 2013, 6013, 6014, 6016), Ethyl -- II Lucite Acrylic Resin (Methacrylate Polymers) (Lucite 2042), n-butyl--(Lucite 2044), isobutyl -- (CH2C(CH3)COOR),,: A series of polymeric esters of (Lucite 2045), or 50/50 n-butyl/isobutyl -- (Lucite methacrylic acid in which R is methyl--(Lucite 2008, 2046). Water-white, transparent, thermoplastic resins Lucite GRADE NUMBER POLYMER TYPE TYPICAL INHERENT VISCOSITY* MOLECULAR WEIGHT PRINCIPAL CHARACTERISTICS AND USES Granular Polymers 2008 2009 2010 Methyl methacrylate Methyl methacrylate Methyl methacrylate 2041 Methyl methacrylate 2013 Methyl/n-butyl methacrylate copolymer 2042 Ethyl methacrylate 2044 n-Butyl methacrylate 2045 Isobutyl methacrylate 2046 n-Butyl/isobutyl methacry late, 50/50 copolymer Solution Polymers 6010 Methyl methacrylate 6011 6012 6013 Methyl methacrylate Methyl methacrylate, acidic copolymer Methyl/n-butyl methacrylate copolymer 6014 Methyl methacrylate copolymer 0.20 0.45 0.45 1.20 0.20 0.91 0.53 0.66 0.61 0.45 0.34 0.38 0.20 0.45 Low Lowest molecular weight grade; used in lacquers and gravure inks requiring low viscosity at high solids. A more soluble grade of polymethyl methacrylate than Lucite 2010; Medium-high permits higher solidstopcoating lacquers and PVC-acrylic inks. Medium-high The highest tensile strength acrylic resin available to the lacquer industry; used primarily in topcoatings for vinyls and in miscellaneous metal finishes. Very high The highest molecular weight grade; used in topcoating lacquers for vinyl substrates where maximum abrasion resistance is required. Gives low viscosities at high solids; soluble in alcohol-water-ammonia Medium-low " mixtures as well as in common lacquer solvents. Useful in both gravure and flexographic inks and in lacquers. Very high A hard, slightly flexible polymer used to impart slip to vinyl top coating lacquers and to give high-gloss coatings for decolcomanias. Solutions show excellent alcohol tolerance. High Most flexible and adhesive grade. Used as a polymeric plasticizer for nitrocellulose and PVC. Shows good adhesion to Mylar poly ester film, aluminum, etc. Compatible with Lucite 2045 and 2046. High A hard polymer similar to polymethyl methacrylate but compatible with Lucite 2044; can be combined with 2044 to provide a wide range of properties. High Soluble (like Lucite 2044, 2045) in mineral spirits, V.M. & P. naphtha; more flexible than Lucite 2045; can be modified by blend ing with Lucite 2044 or 2045. Useful in aerosol snows, ceramic coatings, and aluminum finishes. Medium-high Solution (40%) of Lucite 2010 in methyl ethyl ketone. Medium Solution (40%) in 30:70 acetone: toluene for convenience in lacquer formulation. Used extensively in manufacture of automotive finishes. Medium Solution (40%) in 30:70 acetone: toluene; contains carboxyl groups to promote adhesion and pigment wetting. Used extensively in man ufacture of automotive finishes. Medium-low Solution (40%) of Lucite 2013 in toluene. Medium Solution (40%) in 80:20 toluene: isopropanol. Methyl methacrylate copolymer with outstanding flexibility and adhesion for use in clear, translucent, or pigmented lacquers. 6016 Methyl/n-butyl methacrylate copolymer 0.26 Medium Solution (40%) in toluene. Similar to Lucite 6014 in applications where maximum toughness and flexibility are not needed, and avail able at lower cost. Compatible with selected alkyd resins. * Inherent viscosity of a solution containing 0.25 g polymer in 50 ml chloroform, measured at 20C. using a No. 50 Cannon-Fenske Viscometer. DUP210011281 RESINS-RUBBER RESINS (NOT MOLDING) (Cont.) in granular and solution forms. Densities from 1.19 1.05; soluble in a wide variety of polar and nonpolar solvents; compatible with many plasticizers. Excellent outdoor durability; chemically stable at elevated temperatures; resistant to water, aqueous salt solu tions and moderately concentrated acids and alkalies. USE: Ingredients in lacquers and other finishes; clear and pigmented aerosol lacquers; aerosol snow; coat ings for fabrics; hot melt adhesive compositions; impregnants for leather; modifiers for other resins such as vinyls. CONTAINERS: 50- and 250-lb. fiber drums. Zytel Nylon Resin; Cream-colored, opalescent Vs -in. cubes. Alcohol-soluble polyamide having an unusual combination of properties, including toughness, flex ibility and high elongation; excellent resistance to most solvents including aliphatic and aromatic hydro carbons, alkalies and oxygen-containing gases. Avail able in two grades: Zytel 61 and Zytel 61 p (plasticized). USE: In high-strength structural adhe sives; coatings for synthetic fiber thread, textiles, leather and paper; hydrocarbon barrier in fuel cells; in wire enamels; as modifier for epoxy and phenolic resins. CONTAINERS: 50-lb. bags. Electrochem. RHEOSTAT: See Explosives, Blasting Accessories and Supplies, page 60. RHODULINE ACID TECHNICAL: 6,6-Iminobis (1-naph- thol-3-sulfonic acid. Paste form; a Chemical Inter mediate. Orchem D. & C. RIFLES: See Arms, page 16. RIVETING IRONS: USE: Electrical heating tools for ....... ....... ...... ...ovitnn rJinn n......... P/~*n4 --irrvrs-f+ r...t..n....r...l .I.......l.. ie+ri/~..*I --klin<^- .e....v...n....A.. sion rivets. RIVETING IRON TIPS: Metal tips specifically fashioned for use with Du Pont riveting irons. Explo.-C.P.S. RIVETS, AIRCRAFT AND INDUSTRIAL BLIND EX PANSION: Fast acting, strong one-piece fasteners. Available in a wide variety of sizes and alloys. USE: For "blind" fastening of primary and secondary assemblies partially or totally inaccessible from the rear, and in open work. CONTAINERS: Fiberboard boxes of 100, 500 and 1,000. Explo.-C.P.S. ROAD MACHINERY AND IMPLEMENT ENAMELS: See Finishes, Refinish, page 73. RORACYL DYES: See Dyes, page 54. RESISTOR COMPOSITIONS: See Electronic Materials, page 55. RETARDANTS, FLAME: See Ammonium Sulfamate, page 7 7,- Ammonium Sulfate, page 7 7; CMTM Flame Retardant, page 42; CZC, page 46; X-12, page 164. RETARDANTS, SOIL: See Finishes, Trade Sales (Con sumer Products), Soil Retardant Finish Concentrate, page 83; Ludox Colloidal Silica, page 100. RETARDER FOR NATURAL AND SYNTHETIC RUBBER: Retarder W: Salicylic acid-HOC4H4COOH with a dispersing agent. Buff-colored, non-dusty powder; Sp. Gr. 1.37. USE: To prevent premature curing of natural and synthetic rubber; to activate blowing agents. CON TAINERS: 300-lb. drums. Elastomers RETARDERS FOR FINISHES: See Finishes, Automotive, page 70. RETARDER LAN SURFACE ACTIVE AGENT: Dye re tarding and dye stripping agent for basic dyes on Orion acrylic fiber, cotton and rayon. Minimizes graniting of direct dyes in paper. Orchem D. & C. RETARDER THINNER FOR DUCO AND LUCITE LACQUERS: See Finishes, Refinish, page 73. RETARDER W: See Retarder for Natural and Synthetic Rubber, above. RETARDERS FOR above. DYEING: See Retarder LAN, 137 DUP210011282 RUBBERTONE-SEED RUBBERTONETM RUBBER FINISH: See Finishes, Refinish, page 73. SCREENS, INTENSIFYING: See Radiographic Products, page 133. RUBBING AND POLISHING COMPOUNDS: See Automotive Specialties 7 Products, page 20; Finishes, Automotive, page 69; Finishes, Refinish, page 73. RUBINE PIGMENTS: See Pigment Colors, page 124. SCREENS, RADIOGRAPHIC: See Radiographic Prod ucts, page 133. SCREWDRIVERS, AIR: See Tools, Construction and Industrial, page 156. RUG ANCHOR I UMI.Wy -ATJOU. RUG UNDERLAY: See Coated RULAN FLAME RETARDANT PLASTIC: See Plastics, Rulan, page 127. RUST INHIBITOR: See Automotive Specialties 7 Prod ucts, page 18. RUST PREVENTIVE: See Petroleum Chemicals, Corro sion Inhibitors, Petroleum, page 113. RUTILE: See Titanium Dioxide Pigments, page 153. SDDC-SODIUM DIMETHYLDITHIOCARBAMATE: See r-i-- Synthetic Rubke 129. SEALERS: See Automotive Specialties 7 Products, page 18; Finishes, page 70, 73, 79. SECTIONING SWITCH: See Blasting Accessories and Supplies, page 61. SEEDS, LAWN: See Lawn and Garden Products, page 97. s 5-55X SAFELIGHT: See Photographic Products, Special Products, page 124. SEED TREATMENTS SAFETY FILM: See Photographic Products, page 120. SAFETY FUSE: See Explosives, Blasting Accessories and Supplies, page 60. Arasan 42-S Thiram Fungicide and Repellent: A stable liquid suspension containing 4 lb. thiram (tetramethylthiuramdisulfide) per gal.; particularly suited for slurry, dip and spray application. USE: For treatment SAL AMMONIAC: See Ammonium Chloride, page 11 of seeds of the same crops for which other Arasan products are recommended; for spray application to SAUCYLANILIDE, TECHNICAL: See Shirlan, page 140. sorghum fields grown for seed to inhibit seed-head SALT CAKE-INDUSTRIAL GRADE (SODIUM SULFATE); SODIUM SULFATE SR--NA2S04: White granular or powdered crystalline materia), soluble in water, containing a minimum of 95% Na2S04. USE: In manufacture of sulfate and kraft paper, glass, sodium sulfide and other mineral salts, blanc fixe, ceramic glazes; as an ingredient in mineral animal foods. CON mold; for application to fruit trees, ornamentals, shrubs and nursery stock as a repellent against rabbits, deer and birds. CONTAINERS: 1-qt. (12 in a case) cans, 1-gal. (4 in a case) cans and 5-gal. drums. Ind.&Bio.-Bio. Arasan 50 Red Thiram Seed Disinfectant and Protectant: Active ingredient--50% thiram (tetra- TAINERS: 100-lb. bags and bulk. Ind.&Bio.-Ind. methylthiuramdisulfide). Colors seed red. USE: Same j| as Arasan 75. Formulated for dry treatment only. SANDERS, AIR: See Tools, Construction and Industrial, CONTAINERS: 2-lb. canisters (12 in a case), 25- and page 156. 100-lb. drums. Ind.&Bio.-Bio. SAVALUX FAST COLORS: See Dyes, page 54. SCATTER LOADS: See Ammunition, page 12. SCREEN DAY PACK: See Radiographic Products, page 133. Arasan 50-Red ND Thiram Seed Protectant: Active ingredient--50% thiram (tetramethylthiuram- disulfide). Colors seed red. USE: Same as Arasan 75. Nondusty formulation for dry treatment. CON TAINERS: 100-lb. drums. Ind.&Bio.-Bio. SCREEN PROCESS CHEMICALS: See Photographic Products, page 122. SCREEN PROCESS FILM: See Photographic Products, page 118. SCREENS, FLUOROSCOPIC: See Radiographic Products, page 133. Arasan 75 Thiram Seed Protectant: Active in gredient--75% thiram (tetramethylthiuramdisulfide). Formulated for dry treatment of seed, but for special uses it may be applied as a slurry. USE: As seed treat ment to reduce losses from seed decay and dampingoff of field ond sweet corn, peanuts, sorghum, rice, soybeans, peas, beans, cucurbits and other vegetable crop seeds; grass seed and small-seeded legumes such DUP210011283 SEED-SHEET SEED TREATMENTS (Cont.) as alfalfa and clover; as an animal repellent on coniferous seed. CONTAINERS: 2-lb. canisters (12 in a case), 25- and 100-lb. drums. Ind.&Bio.-Bio. Arasan SF-M Thiram Seed Protectant: Contains 75% thiram (tetramethylthiuramdisulfide) 4- 2% methoxychlor for added protection against storage insects; wettable powder for slurry treatment. USE: Treatment of same crop seeds for which Arasan SF-X is recommended. CONTAINERS: 25- and 100-lb. drums. Ind.&Bio.-Bio. Arasan SF-X Thiram Seed Protectant: Active in gredient--75% thiram (tetramethylthiuramdisulfide); wettable powder for slurry treatment. USE: For treat ment of seeds of same crops for which Arasan 75 is recommended, with the exception of onions and conifers. CONTAINERS: 100-lb. drums. Ind.&Bio.-Bio. Ceresan L Liquid Mercurial Seed Disinfectant: Ac tive ingredients --methyl mercury 2,3-dihydroxy- propyl mercaptide and methyl mercury acetate. Colors seed red. USE: Undiluted in ready mix treaters or diluted with water for slurry treaters to control certain seed-borne diseases and to reduce losses from seed decay and seedling blights of wheat, oats, barley, rye, sorghum, rice, flax, safflower and cotton; for control of snow mold of wheat. CONTAINERS: 5-, 30- and 55-gal. drums. Ind.&Bio.-Bio. Ceresan M Seed Disinfectant: Active ingredient-- 7.7% ethyl mercury p-toluene sulfonanilide. USE: As a dust or as a slurry treatment for the same disease control and crop seed uses as Ceresan L liquid mercurial, plus sugar beet seed; for control of snow mold of wheat. CONTAINERS: 14-oz. cans (12 in a case), 3-lb. cans (6 in a case), 40-lb. pails and 100-lb. drums. Ind.&Bio.-Bio. Ceresan M-DB Seed Disinfectant: Active ingre dient--1.93% ethyl mercury p-toluene sulfonanilide. USE: As a dust mixed in the drill or planter box for the same disease control and crop seed uses as Ceresan M, but at four times the use rate. CONTAINERS: 3-lb. cans (12 in a case) and 6-lb. cans (6 in a case). Ind.&Bio.-Bio. 2% Ceresan Red Seed Disinfectant: Active ingre dient--2% ethyl mercury chloride. Colors seed red. USE: For treatment of cotton, peanuts and pea seeds to control the numerous seed-borne diseases and to reduce seed decay and check damping-off; as a short soak treatment for basal rot of narcissus bulbs. CONTAINERS: 1 Vi -lb. cans (12 in a case) and 75-lb. drums. Ind.&Bio.-Bio. Delsan A-D Seed Protectant: Active ingredients-- 60% thiram (tetramethylthiuramdisulfide) and 15% dieldrin (hexachloroepoxyoctahydro-endo, exo-di- methanonaphthalene). USE: Combination fungicide and insecticide seed treatment for corn, peas, beans, cucurbits, rice and sorghum to reduce losses from seed decay, seedling blight and certain soil insects. For use as a slurry treatment. CONTAINERS: 7-oz. cans (24 in a case), 25- and 100-lb. drums. Ind.&Bio.-Bio. Mersect Aldrin Seed Insecticide: Active ingre dients--aldrin and aromatic petroleum derivatives; contains 4 pounds aldrin per gallon. Colors seed red. USE: Undiluted in ready mix treaters or diluted with water for application in slurry treater to protect seeds and germinating seedlings of wheat, oats, barley and rye against soil insects such as wireworms and seed corn maggot. CONTAINERS: 5- and 30-gal. drums. Ind.&Bio.-Bio. Semesan Bel S Mercurial Seed Disinfectant: Ac tive ingredients--12.5% hydroxymercurinitrophenol and 3.8% hydroxymercurichlorophenol. USE: For spray or dip treatment of Irish and sweet potatoes (seed pieces or slips) to protect against decay and control certain surface-borne diseases. CONTAINERS: 1-lb. cans (12 in a case), 4-lb. cans (6 in a case) and 40-lb. pails. Ind.&Bio.-Bio. SEISMEX^ DYNAMITE: See Explosives, Dynamites, page 63. SEISMOGEL GELATIN: See Explosives, Dynamites, page 63. SEISMOGRAPH BLASTING CAPS: See Explosives, Blasting Accessories and Supplies, Blasting Caps, Electric, SSSTM Seismograph, page 59. SEISMO-WRIT RECORDING PAPER: See Photographic Products, page 118. SEMESAN SEED DISINFECTANTS: See Seed Treat ments, Semesan Bel, above. SEMESAN TURF FUNGICIDE: See Fungicides, Turf, page 89. SEQUESTERING AGENT: See Acids, Diclycolic Acid, page 3. 7 AUTOMOTIVE SPECIALTIES: See Automotive Spe cialties 7 Products, pages 18 to 21. SEVRON DYES: See Dyes, page 54. SHEET STOCKS, PLASTIC: See Plastics, Butacite, page 725. SHEET STOCKS, RUBBER: See Coated Fabrics, Fairprene, page 42. 139 DUP210011284 K SHELLS-SMOKELESS SHELLS, INDUSTRIAL: See Tools, Powder Actuated, page 157. SHELLS, PLASTIC: See Ammunition, page 11. SHELLS, RIFLE: See Ammunition, page 11. SHELLS, SHOTGUN: See Ammunition, page 11. SHIELDTM CAR FINISH PROTECTANT: See Automotive Specialties 7 Products, page 20. SHIRLAN EXTRA INDUSTRIAL FUNGICIDE: Tech nical salicylanilide. A fungicide for general industrial use where a low order of toxicity is required. Orchem D. & C. SHOES: See Corfam Poromeric Shoe Upper Material, page 45. SHOTGUNS, REMINGTON: See Arms, page 17. SHOTSHELL POWDERS: See Smokeless Powders, page 141. SHUR SHOT SCATTER LOADS, SHOTGUN SHELLS: See Ammunition, page 12. SILICA, COLLOIDAL: See Ludox Colloidal Silica, page 100. SILICA OF SODA: See Sodium Silicate Solution, page 143. SILICATES: Textile: See Resins (not molding), Elvacet, page 134; Elvanol, page 135; Lucite, page 136; Sodium CMC, page 142. SKAMEX METALLURGICAL ADDITIVE: A fluorocar bon plastic, pink in color, available in five different forms; cakes (rings), slugs (rods), powder, pellets and aqueous-based mold wash for the benefaction of molten metal. USE: Cakes and slugs are specifically designed for immersion beneath the surface of hot metal for stirring and the removal of excessive quantities of dis solved hydrogen. Powder, pellets, slugs and mold wash are added to molds during casting to create a protective atmosphere against the effects of absorbed oxygen during casting. The product has application in the metallurgy of ferrous and nonferrous metals. CON TAINERS: Powder, pellets, cakes and slugs--50-lb. fiber- board drums. Mold wash--100-lb. 44% concentrate, 25-gal. fiber drums. Ind.&Bio.-Ind. SKEET LOADS: See Ammunition, page 11. SHEET OUTFITS: See Traps and Targets, page 158. SLIP-RETARDANT FLOOR WAX: See Professional Floor Maintenance Products, page 131. SLIPSPRAY DRY LUBRICANT: See Automotive Spe cialties, 7 Products, page 20. SLUGS, RIFLED: See Ammunition, page 12. SMITE GARDEN INSECTICIDE: See Lawn and Garden Products, page 97. Potassium: See Potassium Silicate Solution, page 129. Sodium: See Sodium Silicate Solution, page 143. Zinc: See Luminescent Chemicals, page 101. SIUCONE COATED MATERIALS: See Coated Fabrics, Fairprene, page 42. SILVER COATINGS: See Electronic Materials, page 55. SILVER POWDER: See Electronic Materials, page 55. SILVER SALT: Sold as 2-Anthraquinonesulfonic acid, sodium salt Dry Ground Technical, a Chemical Inter mediate. Orchem D. & C. SITOL FLAKES OXIDIZING AGENT: A Protective oxidizing agent in discharge printing. Orchem D. & C. SIZES: Paper: See Aluminum Sulfate, page 7; Resins (not molding), Elvanol, page 135; Quilon, page 132; Sodium CMC, page 142. SMOKELESS POWDER: Black Sporting Powder: See Black Sporting Powder, page 23. Improved Military Rifle Powders These powders represent the latest development in progressive burning nitrocellulose powders for hand loading or military cartridge applications. CON TAINERS: 1-lb. canisters, 8-lb. caddies and 20-lb. metal kegs. Explo.-C.P.S. IMR-3031 Rifle Powder: Recommended for medium capacity cartridges. IMR-4064 Rifle Powder: A powder for medium and large capacity cartridges that has exceptionally uniform burning qualities. Good accuracy is easily achieved with this powder when it is loaded properly. IMR-4T98 Rifle Powder: Developed especially for small and medium capacity cartridges and reduced loads. IMR-4227 Rifle Powder: Developed for small capac ity cartridges. It is too quick burning to use in large 140 DUP210011285 SMOKELESS-SODIUM SMOKELESS POWDER (Cont.) capacity cartridges, except in reduced loads. Can be used effectively in .410 bore shotshell loads. IMR-4320 Rifle Powder: Developed specifically for military cartridges, but equally satisfactory for all ordinary high-velocity cartridges. IMR-4350 Rifle Powder: Developed especially for magnum cartridges. When properly loaded, this powder will give very uniform results. IMR-4895 Rifle Powder: This time-tested standard for military .30-06 ammunition is now being man ufactured again. Slightly faster than IMR-4320. Loads uniformly in all powder measures. Pistol Powder Hi-Skor Pistol Powder: Recommended for clean burning, accurate target loads in .38 special and .45 ACP calibers, as well as full-powder loads for .45 ACP. CONTAINERS: Vi -lb. canisters, 4-lb. caddies and 25-lb. metal drums. Explo.-C.P.S. Shotshell Powders Bulk Powder: This is a true bulk smokeless powder and has been the favorite of many handloaders since 1893. It is the only powder of its type available to the handloaders today. While it is intended for volumetric loading by drams, it is not suitable for use as a replacement for black powder in older guns. CONTAINERS: Vi -lb. canisters, 4-lb. caddies and 20-lb. metal drums. Explo.-C.P.S. New Hi-Skor 700-X Double-Base Shotshell Pow der: Specifically designed for today's 12-gauge com ponents. Developed to give optimum ballistics at minimum charge weight (means more reloads per pound of powder). 700-X is dense, easy to load, clean to handle and loads uniformly. Wad pressures are not critical. CONTAINERS: Vi lb. canisters, 5 lb. caddies and 12 lb. kegs. Explo.-C.P.S. Hi-Skor Shotshell Powder: Single-base powder de signed specifically for target loads with burning properties that result in outstanding performance under the demanding requirements placed on gun and shooter by shotshell target sports. Hi-Skor has the physical shape and density that makes it eminently suitable for use in all shotshell handloading tools. CONTAINERS: Vi -lb. canisters, 4-lb. caddies and 10-lb. metal kegs. Explo.-C.P.S. P-5066 Powder: This powder is an excellent powder for shotshell target reloads as well as a wide variety of center-fire handgun ammunition. CONTAINERS: Vi -lb. canisters, 4-lb. caddies and 25-lb. metal drums. Explo.-C.P.S. PB Shotshell Powder: A single-base propellant, replacing the old Du Pont MX. This powder is for use in low base shells. Produces exceptional 20 and 28 gauge skeet reloads. Many shooters prefer PB for their 12 gauge target loads. It will give a 3 dram equivalent velocity at relatively low chamber pressures. CONTAINERS: Vi -lb. canisters, 4-lb. caddies and 25-lb. metal drums. Explo.-C.P.S. Sporting Rifle Powders SR-4756 Shotshell Powder: This powder is recom mended for the handloader who desires the ultimate in performance from his magnum shotshell loads. Explo.-C.P.S. SR-4759 Rifle Powder: A sporting rifle powder in tended especially for reduced loads in large capacity cartridges. Affords a uniformity that provides ex cellent accuracy. Explo.-C.P.S. SR-7625 Shotshell Powder: A relatively new pow der, primarily for use in "Standard long range loads." CONTAINERS: (All SR powders) Vi -lb. canisters and 25-lb. metal drums. Explo.-C.P.S. SOAP BOXES: See Toiletries, page 153. SODIUM-Na: Lustrous, silvery metal; soft and ductile; extremely reactive; M. P. 208F. (97.8C.); B. P. 1618F. (881 C.); weight at M. P. 59.39 Ib./cu. ft. (solid); inert to nitrogen, argon and helium, dry petroleum ether, toluene, kerosene, naphtha and other hydrocarbon liquids, but reacts vigorously with water. Available in Regular Grade and Reactor Grade. Electrochem. REGULAR Gr a d e : Contains 0.04% calcium max. and 0.005% chlorides (as Cl) max. USE: In manufacture of tetraethyl lead, sodium cyanide, sodium peroxide and sodium hydride; in reduction of animal and vege table oils to long-chain fatty alcohols for manufacture of detergents, plasticizers, synthetic waxes and lu bricants; in preparation of sodamide and sodium alkoxides for manufacture of dye intermediates and pharmaceuticals such as sulfa drugs, antihistamines and barbiturates; in sodium hydride process for de scaling ferrous and nonferrous metals and alloys; in alloying metal and for grain refining of aluminum alloys; in production of potassium, beryllium, titanium, uranium and other metals by reduction of their salts; and as a heat transfer medium. CONTAINERS: 50-lb. cases (two 25-lb. pails of 1- or 2 Viz -lb. bricks), 100-lb. cases (ten 10-lb. tins of 2 Vi-lb. bricks), 290-lb. bbls. (1-, 2 Vi-, 5- or 1216-lb. bricks), 230- and 420-lb. nonreturnable drums (fused solid) and 80,000-lb. tank ca rs. 141 DUP210011286 " l : ; ( | < : , i I I *; i ' : I ; , : :i | | j li i ! , ,i j! i :i SODIUM SODIUM-Na (Cont.) REACTOR Gr a d e: Contains 0.001% (10 ppm.) calcium max. and 0.005% (50 ppm.) chlorides (as Cl) max. Low calcium content minimizes danger of plugging small passages. USE: Heat transfer medium in atomic power systems. CONTAINERS: 230- and 420-lb. nonreturnable drums (fused solid) and 80,000-lb. tank cars. SODIUM ACID SULFITE: See Sodium Bisulfite, below. SODIUM ALKYL NAPTHALENE SULFONATE: See Alkanol B and Alkanol BG Solution, page 6. SODIUM ALKYL SULFONATE: See Wetting Agent for Natural and Synthetic Rubber, Aquarex, page 163; Alkanol, page 6; Pefrowef, page 115. SODIUM BISULFATE-GLOBULAR TECHNICAL G.B.S. (SODIUM ACID SULFATE, NITER CAKE, BISULFATE OF SODA)-- NaHS04 : White, opaque or translucent, globular shaped pellets; soluble in water; aqueous solu- tion strongly acid in reaction. USE: As an ingredient of toilet bowl cleaners, industrial cleaners and metal pick ling compounds. CONTAINERS: 100- and 400-lb. fiber drums, hopper cars and trucks. Ind.&Bio.-Ind. SODIUM BISULFITE-SOLUTION-TECHNICAL AND FOOD PROCESSING (SODIUM ACID SULFITE) -- NaHSOs IN WATER SOLUTION: Clear, colorless liquid with sulfurous odor; contains 38% NaHS03. USE: In the manufacture of dyes, intermediates and other organic chemicals. CONTAINERS: Tank trucks. Ind.&Bio.-Ind. SODIUM BORATE PERHYDRATE. See Perdox, pagelll. SODIUM CMC (SODIUM CARBOXYMETHYLCELLULOSE): Dry, free-flowing, light cream to white colored fibrous powder completely soluble in water. Available in Technical and Refined Grades, in several viscosity types and degree of substitution levels. USE: As a thickening, stabilizing, dispersing, suspending, film-forming agent and protective colloid in aqueous systems, for soil suspen sion in detergents, fluid-loss control in drilling muds; strength improvement and surface coating of paper and paperboard; as a textile warp size, laundry size, synthetic tobacco leaf binder, ceramics binder, toothpaste thickener, liquid detergent thickener, ice cream stabilizer; in foods, pharmaceuticals, cosmetics, paints, adhesives, textile finishes and emulsions. CONTAINERS: Multi-ply moisture resistant 50- and 75-lb. multi-wall paper bags. Explo.-C.P.S. SODIUM CMC, REFINED: See Qua/ex Sodium CMC Refined, page 132. SODIUM COPPER CYANIDE DOUBLE SALT: See Electroplating Products, page 57. SODIUM CYANIDE 98% -NaCN: A white solid con taining 98.0% min. sodium cyanide. M.P. 1047F. (564C.) ; B.P. 2725F. (1496C.) Us e: Heat treating of steel; in electroplating; in cleaning of metal, including neutralizing after pickling; in fumigation; unhairing of hides,- for manufacture of indigo, dye intermediates and other chemical compounds; in the extraction of copper, gold, silver, zinc, and lead from ores. CON TAINERS: 100-and 200-lb. steel drums. Electrochem. ALL-PURPOSE CYANOBR1K SODIUM CYANIDE: 1-oz. pillow-shaped briquettes. Al l -Pu r p o s e Cy a n o g r a n So d iu m Cy a n id e : Gran ular form; passes 100% through 10 mesh, retained on 50 mesh. REAGENT Gr a d e: Granular form. Meets A.C.S. Speci fications. SODIUM DIBUTYL DITHIOCARBAMATE: See Ac celerators For Natural and Synthetic Rubber, Tepidone, page 2. SODIUM DIMETHYL DITHIOCARBAMATE: See Poly merization Chemicals for Synthetic Rubber, SDDC, page 129. SODIUM HYDROSULFITE: See Hydrosulfite Concen trated, page 93. SODIUM HYPOSULFITE: See Sodium Thiosulfate, page 144. SODIUM LAURYL SULFATE: See Duponol, page 52. SODIUM MERCAPTOBENZOTHIAZOLE: See Accelera tors for Natural and Synthetic Rubber, MBT, page 1. SODIUM METAL: See Sodium, page 141. SODIUM METANILATE TECHNICAL: Metanilic acid, sodium salt, m-Aminobenzenesulfonic acid, sodium salt. Powder form; a Chemical Intermediate. Orchem D. & C. SODIUM METASILICATE-TECHNICAL-- Na2Si03 5H20: White, granular, translucent solid; soluble in water; insoluble in alcohol; aqueous solution strongly alkaline in reaction. USE: As a soap builder and ingredient in detergents and cleaning compounds for cleaning fabrics, glass, ceramics, metal products, etc.; as a detergent in kier boiling of cotton goods; as a water softener. CONTAINERS: 100-lb. bags. Ind.&Bio.-Ind. SODIUM METHYLDITHIOCARBAMATE: See VPM Soil Fumigant, page 161. SODIUM MONOXIDE--Na20: Light gray, fire, spherical particles. Usually contains a small amount of free sodium (1-2%) and may contain a small amount of sodium peroxide (1-2%). USE: As a condensing or polymerizing agent in organic reactions; as a dehydrat- DUP210011287 SODIUM SODIUM MONOXIDE--Na20(Cont.) ing agent. CONTAINERS: 60-lb. pails and 350-lb. steel drums. Electrochem. SODIUM NAPHTHIONATE TECHNICAL: Naphthionic acid, sodium salt; 4-Amino-l-naphthalenesulfonic acid, sodium salt. Powder form; a Chemical Inter mediate. Orchem D. & C. SODIUM NITRITE--U.S.P.--NaNO,: Available as a As a corrosion inhibitor in oil storage tanks, domestic fuel oil tanks, oil product pipelines, oil tankers, antifreeze solutions, diesel engines, wrapping materials, cutting fluids, greases and lubricants, fire extinguishing com pounds, refrigerating systems, temporary protective coat ings, paints and sea water systems; in heat transfer salt; in azo dye manufacture; in rubber retarders and ac celerators; in curing meats; in inhibiting polymer forma tion and in insecticidal smokes. CONTAINERS: 100 lb. net paper bags. 100- and 400-lb. net fiber drums. Explo.-C.P.S. SODIUM PERBORATE TETRAHYDRATE-- NaB03 -- 4H20: Technical, N.F. and N.F. 100 mesh Grades. An alkaline, white powder, soluble in water and acid solutions; in water, gives slightly alkaline solution containing hydrogen peroxide and borate; active oxygen content min. 10%; sodium perborate content min. 96.2%. Technical and N.F. Grades pass 20 mesh; N.F. 100 Mesh Grade passes 99.5% through 100 mesh. USE: Bleaching textiles; oxidizing agent for vat colors; assist ant to textile detergents; constituent of dentifrices and pharmaceuticals; ingredient in dry laundry bleach pow ders and plastic dishware stain removers; polymerization catalyst. CONTAINERS: 100-lb. multi-wall bags and 250- lb. fiber drums. Electrochem. SODIUM PEROXIDE--Na202: Pale yellow, beadlike solid; stable when dry; readily dissolves in cold water to form alkaline hydrogen peroxide solution. Na202 con tent min. 96%; active oxygen content approximately 20% by weight. Electrochem. Te c h n ic a l Gr a d e (So l o z o n e s o d iu m Pe r o x id e DFF): Dustless, free-flowing; bulk density approx. 95 Ib./cu. ft.; melting point above 450C.; in water solu tion releases 103% of its weight as caustic soda. USE: Bleaching of woodpulps such as groundwood, cold soda, kraft, sulfite and recovered pulp; bleaching cotton knit goods; purification of metal salts; man ufacture of inorganic and organic peroxides such as benzoyl peroxide; general oxidizing agent. CON TAINERS: 75-lb. pails and 400-lb. drums. CALORIFIC GRADE: All passes 28 mesh. Meets A. C. S. specifications. USE: For calorific determinations. CON TAINERS: 65-lb. pails. SODIUM PICRAMATE TECHNICAL: Plcramic acid, sodium salt; 2-Amino-4,6-dinitrophenol, sodium salt. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. SODIUM PROPIONATE: See Nutrition and Therapy Products, Impedex, page 70S. SODIUM SILICATE--GLASS--TECHNICAL--RATIO % Si02--% Na20 1.95 and 3.25: Clear, colorless to slightly greenish, glassy lumps or white powder; sol uble in water at elevated temperatures and pressures. USE: In manufacture of sodium silicate solutions; in enamel frits; in coated welding rods and cements. CON TAINERS: 100-lb. bags, 500-lb. drums, hopper cars and trucks. Dissolvers available on rental basis for preparing large volumes of solution. Ind.&Bio.-Ind. SODIUM SILICATE SOLUTION--TECHNICAL (LIQUID SILICATE OF SODA, WATER GLASS): Clear or slightly cloudy liquids of various Si02-Na20 ratios; gravity from 34-60B. USE: As a corrugated boxboard adhesive; in the manufacture of silica gel; in the man ufacture of hot-top collars for pouring molten metal; as a welding rod coating; in the manufacture of soap and detergent compounds; as a stabilizer in peroxide bleach ing of cotton, rayon and paper; tor silk weighting; in foundry core binders; in roofing granules, for soil stabilization. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. SODIUM STYRENE SULFONATE (SGDiUM P-VINYLBENZENE SULFONATE) -- (CH2 = CH)--C6H4--S02ONa: White, free-flowing powder. Contains 90.5% reactive monomer. USE: As chemical intermediate and polymer component, can be expected to enhance polyelectrolyte, dye receptivity and antistatic properties of polymers. As intermediate to ion exchange resins, confers ion selectivity and increased capacity on resin. CONTAINERS: 325-lb. lined fiber drums. Ind.&Bio.-Ind. SODIUM SULFATE--INDUSTRIAL: See Salt Cake, page 738. SODIUM SULFOCYANIDE (SODIUM THIO CYANATE) -- NaCNS: Available in anhydrous form and as solution. USE: In electroplating, textile printing, proc essing of color film, preparation of sulfocyanide com pounds. Electrochem. ANHYDROUS: Grayish-white granules,- NaCNS content min. 98%; soluble in water and alcohol; M. P. 549F. (287C.). CONTAINERS: 25- and 100-lb. fiber drums. SOLUTION: Aqueous solution of high purity; colorless; NaCNS content min. 47% (sold on basis of 100% NaCNS). CONTAINERS: 500-lb. steel drums. SODIUM SULFONATE: See Alkanol, page 6; Avitone, page 21; Petrowet, page 115. 143 DUP210011288 SODIUM-SPONGE SODIUM SULFURET: See Electroplating Products, Poly sulfide, page 57. SODIUM THIOCYANATE: See Sodium Sulfocyanide, page 143. SODIUM THIOSULFATE--TECHNICAL, FOOD PROC ESSING AND PHOTO QUALITY (SODIUM HYPOSULFITE, HYPO, ANTICHLOR) -- Na2S203 SH2O: Colorless to white, translucent, ef florescent crystals; soluble in water; insoluble in alcohol; M. P. approximately 48C.; decomposes with further heating. USE: As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper, pulp, textiles, etc.; in manufacture of dyes. CONTAINERS; 100-lb. bags. Ind.&Bio.-Ind. SODIUM THIOSULFATE--ANHYDROUS TECHNICAL, FOOD PROCESSING AND PHOTO QUALITY (SODIUM HYPOSULFITE, HYPO, ANTICHLOR) -- NCI2S2O3: White granular crystals; soluble in water; insoluble in alcohol. USE: As a reducing agent in chrome tanning of leather; to dissolve silver salts ("fixing") in photography; as an antichlor in bleaching of paper, pulp, textiles, etc. CONTAINERS: 64- and 100-lb. bags. Ind.&Bio.-Ind. SOFTENERS, TEXTILE AND PAPER: See Avitex and Avitone, page 21. SOIL FUMIGANT: See VPM Soil Fumigant, page 161. SOIL RETARDANT CONCENTRATE: See Finishes, Trade Sales (Consumer Products), page 83. SOLOZONE SODIUM PEROXIDE: See Sodium Perox ide, page 143. SOLUBLE PLANT FOOD: See Lawn and Garden Prod ucts, page 98. SOLVENTS: Anisole, page 14 ' Chloroform, page 40 v Decalin, page 46 Dissolve, page 19 DMF, page 51 Finishes--Solvents For Automotive, page 71 Refinish, page 73 Trade Sales, page 83 Formamide, page 85 Freon, page 87 Hexalin, page 91 Hydraphthal, page 92 Hytrol, page 93 Merpol, page 101 Methanol, page 103 Methyl Chloride, page 103 Methylene Chloride, page 104 Nitrobenzene, page 107 Perchlorethylene, page 110 Tetrahydrofuran, page 151 Trichlorethylene, page 158 SOUND RECORDING FILM: See Photographic Prod ucts, page 120. SP-2 PRILLS: See Explosives, Blasting Agents, page 62. SPANDEX FIBER: See Fibers, Synthetic, Lycra, page 65. SPATTER-LESSTM page 12. CARTRIDGES: See Ammunition, SPECIAL GELATIN: See Explosives, Dynamites, page 63. SPECIALTY PRODUCTS: See Surplus Materials, page 146. SPEED GLAZE PUTTY: See Finishes, Refmish, page 73. SPEEDMASTER RIFLES: See Arms, page 17. SPEEDY CLEANER: See Automotive Specialties 7 Prod ucts, page 20. SPONGE, CELLULOSE: Cellulose Sponge: Highly absorbent, soft and re silient when wet, long-lasting. It will not scratch, can be sterilized by boiling, not effected by ordinary cleaning compounds. Fine and coarse pore types are available. USE: Commercially for many purposes, such as washing walls and painted surfaces, windows, etc.; in the home, for washing dishes, general cleaning and in the bath. Av a il a b l e Fo r ms : Convenient sizes in the regular buff shade for general cleaning purposes and in various pastel shades for use in the home. Also cut to specified sizes for converters, or specialized industrial uses. F.&F.-Cons.(Spec.) Cellulose Sponge Yarn: Cotton yarn core covered with cellulose sponge. Wound on ball multiple-end warps and single-end spools. Available in Vi -in. (buff or green) and 14-in. (green only) diameters. USE: For converter use in manufacture of household and industrial wet mops and for weaving into cloths, pads, coaster mats, etc. F.&F.-Cons.(Spec.) Turtleback Car Washing Sponge: A sponge par ticularly designed for use in washing automobiles and trucks. F.&F.-Cons.(Spec.) DUP210011289 SPRAY-SULFQRON SPRAY SYSTEM, POWER: See Professional Floor Maintenance Products, page 131. SPRAYER, GARDEN HOSE: See Lawn and Garden Products, page 98. SPREADER LOADS: See Ammunition, Victor, page 13. SPREADER-STICKER: An amber colored liquid. USE: To improve coverage and retention of agricultural sprays on plant foliage. CONTAINERS: l-pt. cans (16 in a case), i-gai. cans (6 in a case), 5- and 50 gal. drums (non- returnable). (See also Lawn and Garden Products, page 98,j Ind.&Bio.-Bio. SQUEEGEE MEDIUMS: See Ceramic Products, page 27. SQUIB, ELECTRIC: See Military Specialties, page 104. SSSTM SEISMOGRAPH ELECTRIC BLASTING CAPS: See Explosives, Blasting Accessories and Supplies, Blast ing Caps, Electric, page 59. STABILIZERS, FABRIC: See Zeset, page 165. STRIPPABLE COATINGS: See Finishes, Automotive, page 71; Finishes, Refinish, page 72; Finishes, Industrial, page 76. STRONTIUM NITRATE-TECHNICAL-SR(N03)2: White crystalline powder; soluble in water; slightly soluble in alcohol; Sp. Gr. 2.98; purity approximately 97%; flame tests carmine-red. USE: In manufacture of railroad arid highway flares, marine signals, fireworks, pyrotechnics and color pigments. CONTAINERS: 100-lb. bags, 550-lb. drums. ina.-ot Bio.-ind. STUD DRIVERS AND ACCESSORIES: See Tools, Pow der Actuated, page 157. STUDS: See Tools, Powder Actuated, page 158. STUNNER, HUMANE: See Tools, Powder Actuated, page 156. STUNNING CARTRIDGES: See Tools, Powder Actuated, page 156. STABLE FLUIDS: See Petroleum Chemicals, Stable Fluids, page 115. STAINLESS STEEL: See Surplus Materials, page 146. SULFAMIC ACID: See Acids, Sulfamic Acid, page 4. SULFANTHRENE DYES: See Dyes, page 54. STAINS: SULFATES: Alcohol: See Duponol, page 52. Body: See Ceramic Products, page 27. Alkyl: See Duponol, page 52. Furniture: See Finishes, Industrial, page 76; Finishes, Trade Sales (Consumer Products), page 82. Glaze: See Ceramic Products, page 27. Oil, Varnish: See Finishes, Trade Sales (Consumer Products), page 82. Aluminum: See Aluminum Sulfate, page 7. Ammonium: See Ammonium Sulfate, page 11. Dimethyl: See Dimethyl Sulfate, page 49. Methyl: See Dimethyl Sulfate, page 49. Pottery Body: See Ceramic Products, page 27. Wood: See Finishes, Industrial, page 76; Finishes, Con sumer Products, page 82. STEARYL ALCOHOL: See Lorol 28, page 100. Sodium: See Salt Cake, page 138. o-(p-SULFOBENZOYL) BENZOIC ACID, DISODIUM SALT TECHNICAL. Powder form; a Chemical Inter mediate. Orchem D. & C. STEEL PRODUCTS: See Surplus Materials, page 146. SULFOCYANIDE, SODIUM: See Sodium Sulfocyanide, STENCIL PASTE: See Finishes, Industrial, Sign Finishes, page 143. page 75. STOP LEAK: See Automotive Specialties 7 Products, page 19. STORAGE BATTERY ACID: See Acids, Battery Acid, page 3. STRAIGHT DYNAMITE: S ee Explosives, Dynamites, page 63. STREN MONOFILAMENT FISHING LINE: See Plas tics, page 127. SULFOGENE DYES: See Dyes, page 55. 1 -(p-SULFOPHENYL)-3-METHYL-5-P YR AZOLO N E DRY TECHNICAL. Crystalline powder form; a Chemical Intermediate. Orchem D. & C. 1 -(p-SULFOPHENYL)-3-METHYL-5-PY R AZOLO NE PASTE TECHANICAL: p-(3-Methyl-5-oxo-2-pyrazolin- l-yl)benzensulfonic acid. Crystalline paste form; a Chemical Intermediate. Orchem D. & C. STRIPKOLEX DYNAMITE: See Explosives, Dynamites, page 63. SULFORON WETTABLE SULFUR: See Lawn and Garden Products, page 97. 145 DUP210011290 r 1: SULFUR-SYNTHETIC SULFUR TRIOXIDE--STABILIZED LIQUID S03, GAMMA FORM: Colorless, fuming, corrosive liquid, re acts explosively with wcter. USE: As a sulfating and sulfonating agent for detergent, lubricating oil addi tives and synthetic organic chemicals manufacture. CONTAINERS: 750-lb. drums, tank cars and tank trucks. lnd.-&Bio.-lnd. SULFURIC ACID: See Acids, Sulfuric Acid, page 4. SULFURIC ACID, FUMING: See Adds, Sulfuric Add, Gieum, pucjw 5. Automotive (cars and trucks), factory trucks and railroad equipment. Boilers, engines, turbines and steam power equip ment. Centrifuges, filters and dust collectors. Compressors (air and refrigeration) and pumps. Construction equipment (cranes, tractors and miscel laneous heavy equipment). Drives. Drying equipment. Electrical equipment (miscellaneous) and trans SUPERIOR PHOTOGRAPHIC FILM: See Photographic Products, page J 79. SURFACE ACTIVE AGENTS: See Alkanol, page 6; Avifex, page 27; Avitone, page 21; Duponol, page 52; Hydraphfal, page 92; Merpentine, page 707; Merpol, page 707; Pefrowef, page 115; Product BCO, page 130; Tyzor, page 759; Ze/ec, page 164; Zonyl, page 165; Wetting Agents for Natural and Synthetic Rubber, page 163. formers. Fans, blowers, exhausters and ventilators. Heaters, condensers, exchangers and coolers. Hoists, lifts and conveyors. Instruments and metering equipment. Machine tools and shop equipment. Mills, grinders, crushers, mixers and cutters. Motors, gear motors, motor reducers and M.G. sets. Office, laboratory and change house equipment. Safety and fire protection equipment. SURFACERS: See Finishes, Automotive, page 71; Fin ishes, Industrial, page 76. Scales. Spare parts. Tanks, kettles, pressure vessels, stills and columns. SURFACTANT WK: A water soluble surface active agent; principal functioning agent dodecyl ether of poly Textile equipment. Vibrators, shakers and feeders. ethylene glycol. USE: Spray additive to increase the con tact activity of certain herbicides such as Karmex Diuron and Lorox Linuron weed killers. CONTAINERS: 1-gal. cans (6 in a case), 6- and 30-gal. drums (non-returnable). Metal Scrap--Ferrous and Nonferrous: Aluminum, brass, bronze, copper, iron, lead, monel, nickel, stain less steel, steel, tin, zinc. Ind.&Bio.-Bio. Mill Supplies: General industrial maintenance mate 1a SURLYN A, IONOMER: See Plastics, page 127. rials-- new and used. Paper Stock and Cloth: Fabric, used filter cloth, and waste paper. SURPLUS MATERIALS: Residues and Sludges: By-products of all descrip All listed products sold by General Services Dept., Surplus Materials Div. tions,- recovered acids, solvents, salts, lime, cinders, graphite, metallic residues. Buildings: All kinds for dismantlement. Chemicals: Surplus Chemicals, Solvents, Acids, Pig ments, special organic compounds, laboratory re agents. Construction Tools and Materials: All kinds--new and used. Specialties: Spools, bobbins, pirns and cones; experi mental lots and seconds of some company products,rubber; plastics. Stainless Steel: Shapes, pipe, sheets, valves--new and used. Steel Products: Structural, bars, plates, shafting, sheets, rails, cable-new and used. Containers: Bags, bottles, carboys, cartons, drums (steel and fiber), kegs, pails, compressed gas cylinders. SYNTHETIC FIBERS: See Fibers, Synthetic, page 65. Electrical Supplies: Conduit, condulets, fuses, motors, rheostats, starters, switches, wire--new and used. SYNTHETIC RESIN COATED FABRICS, LAMINATES, FELTS: See Coated Fabrics, Armalon, Fabrilite, page 43; Lecton, page 76. Furniture: Office and hotel furniture and equipment, typewriters and business machines--used. SYNTHETIC RUBBER: Machinery and Equipment: All kinds--mew and used. ADIPRENE URETHANE RUBBER: An extremely tough man-made material offering a combination of 146 DUP210011291 SYNTHETIC SYNTHETIC RUBBER (Cont.) the resilience of rubber and the hardness of structural plastics, it has outstanding impact strength, load bearing capacity and abrasion resistance--superior to other elastomers and to most plastics and metals. Resistance to ozone, oxidation and oils is excellent. Outstanding low temperature properties make it useful even in cryogenic applications. Adiprene is a reac tion product of diisocyanate and polyalkylene ether giycoi. in its most common raw polymer form it is a liquid of honey-like color and consistency which is com pounded chemically (to polymerize it further) and con verted into products by casting and other techniques. One grade is available in solid form for processing by usual rubber industry techniques. Each of the three liquid grades produces a different range of properties and hardness, which can be varied by compounding. USE-. Solid industrial tires, rolls, bearings, wear pads, die pads and other metal forming tools, diaphragms, seals and other mechanical goods, equipment coat ings, linings, and compounds for potting and encap sulation of electronic devices. Elastomers Gr a d e s : Adiprene C Urethane Rubber: Amber colored solid in slick form; Sp. Gr. 1.07. USE: For processing by standard rubber industry techniques into prod ucts which require high strength and toughness and excellent resistance to abrasion, oil, oxidation and low temperature brittleness. CONTAINERS: 50-lb. drums. Adiprene L-100 Urethane Rubber: Honey- colored liquid; viscosity approximately 18,000 cps. at 30C.; Sp. Gr. 1.06. USE: A liquid elastomer for fabrication of products of high hardness (up to 90A durometer), load-bearing capacity and excellent resistance to abrasion, oils, oxidation and ozone. CONTAINERS: 40-lb. cans and 450-lb. drums. Adiprene L-167 Urethane Rubber: Honey- colored liquid; viscosity approximately 6,000 cps. at 30C.; Sp. Gr. 1.07. USE: A type of liquid Adiprene which will produce harder (to 95A durometer), higher modulus products than type L-100. CONTAINERS: 40-lb. cans and 450-lb. drums. Adiprene L-315 Urethane Rubber: Honey- colored liquid; viscosity approximately 15,000 cps. at 30C.; Sp. Gr. 1.11. USE: A type of liquid Adiprene which will give products of extreme hardness (45D to 75D durometer) and exceptional impact resistance, as well as load-bearing capacity and resistance to physical abuse somewhat greater than the other types of Adiprene. CONTAINERS: 40-lb. cans and 450-lb. drums. HYPALON SYNTHETIC RUBBER: Chlorosulfonated polyethylene. White chips; Sp. Gr. 1.10-1.28. An elastomer which offers complete resistance to ozone, together with excellent resistance to weather, oil, sol vents, chemicals, heat and abrasion. It can be com pounded in an unlimited range of colors, including white and pastels, which will remain stable under exposure to sunlight. USE: A wide range of industrial and consumer products which require its high perform ance properties, including jacketing and insulation for wire and cable; soles and heels for children's and adult shoes; automotive components: floor tile; coated fabrics; tire white sidewalls; fluid-applied roofing and a variety of protective and decorative coatings; and industrial products such as acid hose, linings for chemical processing equipment, industrial rolls, seals, gaskets and diaphragms. Gr a d e s : Hypalon 20 Synthetic Rubber: White Chips,- Sp. Gr. 1.10. USE: A general-purpose form of Hypalon for processing by standard rubber industry tech niques into molded, extruded and calendered prod ucts, and solvent solutions. CONTAINERS: 50-lb. bags or boxes. Hypalon 30 Synthetic Rubber: White chips; Sp. Gr. 1.28; A material that can be dissolved in solvent for the manufacture of protective and decorative coatings and paint base. CONTAINERS: 50-lb. boxes. Hypalon 40 Synthetic Rubber: The most versa tile type; designed for maximum ease of processing, particularly for extruded and molded products. Provides a high level of vulcanizate properties. CONTAINERS: 50-lb. bags. Hypalon 45 Synthetic Rubber: White chips,- Sp. Gr. 1.11. USE: Similar to Hypalon 40, but yields vulcanizates with higher hardness and modulus, and better low temperature properties, while having compound viscosities generally lower than those of Hypalon 40. Can be used in either solid or cellular compositions. Because it can accept large quan tities of filler and does not require vulcanization, one important use is as a binder for powdered metal to produce magnetic gaskets for appliance doors and sheet goods for x-ray barriers. CONTAINERS: 50-lb. bags. NEOPRENE: Polychloroprene (2-chlorobutadiene 1,3). White to amber chips; Sp. Gr. 1.23. An extremely versatile synthetic rubber notable for its balanced combination of outstanding properties, including resistance to oils, solvents, chemicals, ozone, weather, oxidation, heat and flame. Toughness and other physical properties (tensile strength, elongation re silience and abrasion resistance) also are excellent. Solid neoprene is supplied in 20 different grades (listed below) to provide a variety of processing char- 147 DUP210011292 SYNTHETIC SYNTHETIC RUBBER (Cont.) acteristics and end-use requirements. Properties can also be tailored by compounding to meet specific needs of finished products. USE: Wire and cable; in dustrial hose and belting; automotive gaskets, seals, hose and tubing; tire sidewalls; a wide variety of molded and extruded goods for industrial and archi tectural uses; chemically blown cellular products for many applications; adhesives and protective coatings; and a series of consumer products for the shoe, house and garden, and sporting goods fields. Elastomers GRADES: Neoprene AC: Creamy-white chips. USE: Chiefly for quick setting, high strength adhesive cements. CONTAINERS: 50-lb. bags. Neoprene AD:Creamy-white chips. USE.- Chiefly for quick setting, high strength adhesive cements. Greater viscosity and stability than neoprene AC. CONTAINERS: 50-lb. bags. Neoprene AF: Pale cream chips, with limited stabil ity and very slow crystallization. USE: A chloroprene polymer designed for the preparation of stable onepart adhesives. It cures at room temperature with metal oxides. Films develop strength rapidly and service temperatures can be higher than those made with Grades AC or AD. CONTAINERS: 50-lb. bags. Neoprene CG: Amber chips. USE: Chiefly for quick setting, high strength adhesive cements. Less stable than neoprene AC or AD. CONTAINERS: 50-lb. bags. Neoprene FB: Dark brown, wax-like solid of very low molecular weight. USE: A vulcanizable plas ticizer for neoprene and other synthetic elastomers; in cement applications which require a high solidsto-viscosity ratio; useful in preparation of caulks and sealants. CONTAINERS: 50-lb. fiber drums. Neoprene FC: Wax-like solid of very low molecular weight. USE: A vulcanizable plasticizer for neo prene and other synthetic elastomers; in cement ap plications which require a high solids-to-viscosity ratio,- useful in preparation of caulks and sealants. CONTAINERS: 50-lb. fiber drums. Neoprene GN: Amber chips. USE: A general purpose elastomer for products that must withstand oils, solvents, heat, abrasion, ozone, sunlight and flame. CONTAINERS: 50-lb. bags. Neoprene GN-A: Contains a discoloring antioxi dant. Amber chips. USE: A general purpose elastomer for products that must withstand oils, solvents, heat, abrasion, ozone, sunlight and flame. CONTAINERS: 50-lb. bags. Neoprene GRT: Amber chips. USE: For general purpose compounds requiring retention of building tack and flexibility of uncured stocks. Vulcanizates have superior resistance to hardening due to elas tomer crystallization. CONTAINERS: 50-lb. bags. Neoprene GT: Light amber chips. USE: A versatile general-purpose polymer, which contains a non staining antioxidant. It has very good stability and resists crystallization. Compound viscosity can be controlled to meet Individl c i1 processing require ments. CONTAINERS: 50-lb. bags. Neoprene HC: Cream to white chips. USE: A unique neoprene, much like natural balata. Suit able for golf ball covers and a variety of hot melt and other adhesives and caulk. Good processing for calendered films. CONTAINERS: 25-Ib. bags. Neoprene ILA: Creamy white chips. USE: Highly oil-resistant polymer for mechanical goods, prin cipally printing and textile machine parts. Also use ful for solvent adhesives. CONTAINERS: 50-lb. bags. Neoprene KNR: Amber chips. USE: Chiefly in paints and putties, for lining tanks and chemical equipment. CONTAINERS: 50-lb. bags. Neoprene S: Contains a nondiscoloring antioxi dant. Amber chips. USE: Chiefly in crepe soles that resist softening and are resistant to oil and gasoline. CONTAINERS: 50-lb. bags. Neoprene W: Creamy-white chips. USE: General purpose neoprene having much greater storage sta bility, better processing characteristics and better color retention during curing than the G type neoprenes. Does not contain sulfur or thiuram stabilizers. CONTAINERS: 50-lb. bags. Neoprene WB: Light amber to creamy-white chips. USE: For extruded goods where ultimate in surface appearance is required; highly desirable for cal endered items which must be very smooth and resist shrinkage; similar to Neoprene WX in crystallization resistance. CONTAINERS: 50-lb. bags. Neoprene WD: Light amber to creamy-white chips. USE: A high viscosity form of Neoprene WRT to be used in compounds designed for maximum crystal lization resistance and low temperature flexibility. Containers: 50-ib. bags. Neoprene WHM: Silver-gray to light-amber chips. USE: Because of its very high viscosity it can be ex tended more highly than Neoprene WHV, hence it is excellent for items such as tubes and covers for automotive and general-purpose hose, and for weatherproof wire. CONTAINERS: 50-lb. bags. Neoprene WHV: Light amber to creamy-white chips. USE: A high viscosity form of Neoprene W DUP210011293 SYNTHETIC SYNTHETIC RUBBER (Conf.) for use in compounds containing large amounts of fillers and oils. Can be used as a stiffener for other neoprenes. CONTAINERS: 50-lb. bags. Neoprene WRT: Light amber to creamy-white chips. USE: General purpose neoprene having superior resistance to hardening due to elastomer crystal lization. Has excellent storage stability. CON- Neoprene WX: Light amber to creamy-white chips. USE: General purpose neoprene having better resistance to stiffening due to crystallization than Neoprene W. Has excellent storage stability. CONTAINERS: 50-lb. bags. NEOPRENE LATEX: A water emulsion of polychloro- prene (2-chlorobutadiene 1,3). A milky-white liquid with Sp. Gr. of 1.08 to 1.23, depending on type. Neoprene latex has the same balanced combination of outstanding properties found in solid neoprene. There are 12 types (listed below) which differ in solids content and processing characteristics and, to some extent, in the properties they impart to finished prod ucts. USE: For conversion by standard latex-processing techniques (dipping, spread-coated, spraying) into gloves and other dipped goods, coated fabrics, sheet goods and thread; for use as a binder or impregnant for fibers, nonwoven fabrics and cellulose or asbestos paper; for preparation of adhesives; and for manu facture of latex foam. CONTAINERS: 55-gal. drums, 3,000-gal. tank trucks and 8,000-gal. tank cars. Elastomers GRADES: Neoprene Latex 400: Approximately 50% solids. USE: A general purpose emulsion for products in which high modulus, good heat resistance, high abrasion resistance, improved tear strength and exceptional ozone resistance are needed. Neoprene Latex 450: Approximately 41% solids. USE: For saturation of or beater-addition to cellu lose and asbestos paper products, and for adhering vinyl to porous substrates. Suitable for dipped goods requiring high oil resistance. Neoprene Latex 571: Approximately 50% solids. USE: A general-purpose emulsion. Neoprene Latex 572: Approximately 50% solids. USE: Has high wet strength and is especially good for adhesives. Neoprene Latex 601 A: Approximately 59% solids. USE: A concentrated form of Neoprene Latex 842A for general-purpose use. Neoprene Latex 635: Approximately 58% solids. USE: A concentrated latex for use in blends with other neoprenes to improve wet-gel strength of films. Also for paper pulp addition. Neoprene Latex 650: Approximately 60% solids. USE: A concentrated form of Neoprene Latex 750. For general-purpose uses in which high solids are desired, particularly in dipped goods. Neoprene Latex 735: Approximately 37.5% solids. USE: For addition to cellulose and asbestos paper, and for blending with other neoprene latices to improve wet-gel strength of films. Neoprene Latex 736: Approximately 34.5% sol ids. Especially stabilized for addition to cellulose and asbestos paper. Neoprene Latex 750: Approximately 50% solids. USE: A general-purpose type, particularly for dipped goods where low modulus and excellent crystallization resistance are required. Good for adhesives. Neoprene Latex 842A: Approximately 50% solids. USE: The most versatile type. Excellent for satu rated cellulose paper, coatings, curled hair and dipped goods. Neoprene Latex 950: Approximately 50% solids. USE: A cationic latex for treatment of fibrous materials, elasticized mortar and concrete, and for coatings. NORDEL HYDROCARBON RUBBER: A general- purpose, sulfur-curable elastomer based on a ter- polymer of ethylene, propylene and a nonconjugated diene. Amber to light gray solid. Sp. Gr. 0.85. It is immune to ozone and possesses excellent resistance to heat, sunlight, chemicals and mechanical abuse, to gether with excellent tensile, dynamic, electrical and low temperature properties. It maintains a high per centage of its physical properties and processing char acteristics even when compounded with large amounts of reinforcing fillers and oils. It can be compounded in any color, including white and pastel shades, and is color stable. It is not recommended for service with hydrocarbon oils and solvents. USE: General-purpose rubber goods, including automotive and appliance components, wire insulation and jacketing, electrical accessories, belts, industrial and garden hose, and a variety of other molded and extruded products for industrial and consumer use. Elastomers Gr ad es : Nordel 1040 Hydrocarbon Rubber: Amber to light gray solid. Sp. Gr. 0.85. Viscosity, ML 1 plus 4 (250F): 40. USE: A sulfur-curable polymer of low 149 DUP210011294 SYNTHETIC-TARGET SYNTHETIC RUBBER (Cont.) superior to that of other types. CONTAINERS: 50-lb. viscosity for compounds which must contain low drums. levels of reinforcing filler and oil, for compounds Viton LM Fluoroelcstomer: A waxy, opaque, which must have low viscosity and high hardness, semi-solid at room temperature which becomes a and for compounds to be converted into products clear fluid at 150F.; Sp. Gr. 1.72. USE: For blend by crosshead extrusion. CONTAINERS: 75 (3)-lb. ing with other types of Viton to reduce viscosity bales. and improve extruding and molding characteristics Nordel 1070 Hydrocarbon Rubber: Amber to i :_l ._______ -_I:J iiym yi uy aunu. C ____ii.. ki i T ld\,V3lty / fTIU without excessive sacrifice in heat resistance as with conventional plasticizers. CONTAINERS: 50-lb. drums. plus 4 (250 F): 70. USE: A sulfur-curable polymer which can accept high levels of reinforcing fillers and oils, producing general-purpose compounds or SYNTHETIC RUBBER ACCELERATORS: See Acceler ators for Natural and Synthetic Rubber, page 7. compounds with high tensile strength. CONTAINERS: 75 (3)-lb. bales. SYNTHETIC RUBBER ANTIOXIDANTS: See Antioxi dants for Natural and Synthetic Rubber, page 15. VITON FLUOROELASTOMER: White transparent solid; Sp. Gr. 1.72-1.86 depending on grade. A high SYNTHETIC RUBBER BLOWING AGENTS: See Blow performance elastomer offering unsurpassed service in ing Agents for Natural and Synthetic Rubber, page 23. corrosive fluids and chemicals at temperatures as high as 600F. In air, Viton remains usefully elastic for indefinite periods of continuous exposure at 400- SYNTHETIC RUBBER PEPTIZERS: See Chemical Pep tizers for Natural and Synthetic Rubber, page 39. 450F and of intermittent exposure at higher tempera tures. Resistance to oils, fuels, lubricants, most mineral acids and many aliphatic and aromatic hydrocarbons is outstanding. Mechanical properties are comparable SYNTHETIC RUBBER PROTECTIVE AGENTS: See Protective Agents for Natural and Synthetic Rubber, page 131. to those of many general-purpose rubbers, and excep tional in view of its heat and fluid resistance. Resist ance to ozone, weather and flame are exceptional. SYNTHETIC RUBBER RETARDER. See Retarder for Natural and Synthetic Rubber, page 137. Radiation resistance is good and high vacuum per formance excellent. USE: Viton is used almost entirely in applications which utilize its heat and fluid resist SYNTHETIC RUBBER WETTING AGENTS: See Wet ting Agents for Natural and Synthetic Rubber, page 163. ance-- gaskets, o-rings, seals, diaphragms, pump and valve linings, hose, tubing, wire jacketing and coated fabrics for chemical and petroleum-handling equip SYSTEM, POWER SPRAY: See Professional Floor Maintenance Products, page 131. ment, critical automotive and aerospace components, T high vacuum equipment, and equipment involving cry ! ogenic temperatures and radiation. Elastomers TAMPING BAGS: See Explosives, Blasting accessories GRADES: and Supplies, page 61. Viton A Fluoroelastomer: White translucent solid; Sp. Gr. 1.82. USE: A basic form of Viton for rubber goods which must withstand extremes of heat and corrosive fluids and chemicals. CONTAINERS: 50-lb. drums. Viton A-HV Fluoroelastomer: White translucent solid; Sp. Gr. 1.82. USE: A high viscosity form of Viton A which produces vulcanizates with a some what higher level of high temperature strength, greater resistance to blistering under high pres sures, and slightly better thermal stability at tem peratures above 550F. CONTAINERS: 50-lb. drums. Viton B Fluorelastomer: White translucent solid; Sp. Gr. 1.86. USE: A grade which offers heat and fluid resistance superior to Viton A, and which can be compounded to give compression set resistance TANNING AGENTS Aluminum Complex, page 7. Aluminum Sulfate, page 7. Ammonium Chloride, page 11. Formaldehyde, page 85. G-942TM Tanning Agent, page 90. TAPES: See Coated Fabrics, Armalon, Fairprene, pages 42 and 43. TAPPERS, JET: See Explosives, Blasting Accessories and Supplies, page 60. TAR REMOVER: See Automotive Specialties 7 Prod ucts, Dissolvo, page 19. TARGET LOADS: See Ammunition, page ? 7. DUP210011295 TARGET-TETRALiN TARGET THROY/ER: See Traps and Targets, page 158. TARGETMASTER CARTRIDGES: See Ammunition, page 12. TARGETS: See Traps and Targets, page 158. T-D NICKEL: See Metal Products, page 102. TEDLAR POLYVINYLFLUORIDE FILM: See Film, Tedlar, Polyvinylfluoride, page 67. TEFLON FEP AND TFE: Fabric: See Coated Fabric, Armalon, page 43. Fiber: See Fibers, Synthetic, Teflon, page 65. Film: See Film, Teflon FEP Fluorocarbon, page 67. Finishes: See Finishes, Industrial, page 76. Resins: See Plastics, Teflon FEP and TFE Fluoro carbon resins, page 127. Wire Enamels: See Finishes, Industrial, Wire Enamels, page 76. TELAR ANTIFREEZE: See Antifreeze Products, page 15. TELOMERS, FLUOROCARBON: See Vydax, page 761. TELVAR MONURON WEED KILLERS: See Weed and Brush Killers, page 162. TEPIDONETM RUBBER ACCELERATOR: See Accelerators forNatural and Synthetic Rubber, page 2. TEREPHTHALATE, DIMETHYL: See Dimethyl Terephthalate (DMT), page 49. TEREPHTHALIC ACID: See Acids, Terephthalic Acid, page 5. TERSAN 75 TURF FUNGICIDE: See Fungicides, Turf, page 89. TERSAN OM THIRAM-ORGANIC MERCURY TURF FUNGICIDE: See Fungicides, Turf, page 89. TETRABUTYL TITANATE TECHNICAL: Titanate ester useful as a chemical intermediate, catalyst, dispersant, in scratch-resistant finishes on glass, adhesion promotion, resin crosslinking and heat-resistant paints. Orchem D. & C. 1,4,5,8-TETRACHLOROANTHRAQUINONE C TECH NICAL. Powder form; a Chemical Intermediate. Orchem D. & C. TETRACHLOROETHYLENE: See Perchlorethylene, page page 110. TETRACHLORODIFLUOROETHANE: See Freon Prod ucts, Freon BF Solvent, page 87. TETRACHLOROETHANE (1,1,2,2-TETRACHLORO- ETHANE, ACETYLENE TETRACHLORIDE)--C2H2CI4: A clear, very slightly yellowish, heavy liquid; soluble in alcohol and ether; nonflammable and nonexplosive; un stable in the presence of moisture; vapors relatively toxic. B. P. approximately 295.3F. (146.3C.). Weight per gal. 13.32 lb. at 20C. USE: As a solvent in special preparations; in chemical synthesis. CONTAINERS: 55-gal. (700-lb.) drums. Electrochem. ALPHA, ALPHA, 2,6-TETRACKi.GRCTGLUENE: Sold as 2,6-Dichlorobenzal chloride Technical, a Chemical Intermediate. Orchem D. & C. TETRAETHYL LEAD COMPOUNDS: See Petroleum Chemicals, Antiknock Compounds, page 111. TETRAETHYLTHIURAM DISULFIDE: See Accelerators for Natural and Synthetic Rubber, Thiuram E, page 2. TETRAFLUOROMETHANE: See Freon Products, Freon-14, page 86. TETRAHYDROFURAN (TETRAMETHYLENE OXIDE, THF)--(CH2)40: A clear, colorless liquid with ether-like odor; readily miscible with organic solvents and water. Boiling range 149.9-152.rF. (65.5-66.7C.) ; F.P. -- 163.3F. (-- 108.52C.); flash point (TAG Closed Cup) 6F. (-- 14.5C.); Sp. Gr. (20/4C.) 0.886-0.889; wt. per gal. 7.4 lb.; stabilized with 0.025% butylated hy- droxytoluene (BHT). USE: Excellent solvent for high molecular weight polyvinyl chloride resins and vinyiidene chloride copolymers used for topcoating vinyl fabric and sheeting, coating cellophane, protective coatings, vinyl adhesives, printing inks and film casting; for synthetic polymers, natural resins and organometallic compounds; for Grignard reactions, hydride reductions, stereospecific polymerizations, condensations and esterifications; chem ical intermediate for synthesis of pyrrolidine, tetrahydro- thiophene and many other products; promising monomer or comonomer for polymerization reactions. CONTAINERS: 7-lb. (1-gal.) containers, 35- and 400-lb. drums, tank cars and tank trucks. Electrochem. TETRAHYDRONAPHTHALENE: See Teiralin, below. TETRAHYDRONAPHTHALENE SODIUM SULFONATE: See Alkanol S Flakes, page 7. TETRAISOPROPYL TITANATE TECHNICAL: Titanate ester useful as a chemical intermediate, catalyst, water scavenger, in adhesion promotion, resin crosslinking, and scratch-resistant finishes on glass. Orchem D. & C. TETRAKIS (2-ETHYLHEXYL) TITANATE TECHNICAL: Titanate ester for use in adhesion promotion, resin cross linking catalysis and wax water repellents. Orchem D. & C. TETRALIN SOLVENT: Tetrahydronaphthalene (C,0H12), A solvent and chemical intermediate. Orchem D. & C. 151 DUP210011296 TETRAMETHYL-THINNERS TETRAMETHYL LEAD COMPOUNDS: See Petroleum Chemicals Antiknock Compounds, page 172. TETRAMETHYLENE page 157. OXIDE: See Tetrahydrofuran, TETRAMETHYLTHIURAM DISULFIDE: See Accelerators for Natural and Synthetic Rubber, Thiuram M, page 2. TETRAMETHYLTHIURAM DISULFIDE (THIRAM): See Fungicides, Tersan, page 89, Thylafe, page 89, Thiram Technical page 89; Seed Treatments, Arasan, page 738, Delsan, page 7 39. TETRAMETHYLTHIURAM MONOSULFIDE: See Ac celerators for Natural and Synthetic Rubber Thionex, page 2. TETRAMIX ANTIKNOCK COMPOUNDS: See Petro leum Chemicals, Antiknock Compounds, page 7 72. TETRANITRATE, PENTAERYTHRITE: See Pentaerythrite Tetranitrate (PETN), page 710. TETRASTEARYL TITANATE TECHNICAL: Tito note ester useful as dispersant and in adhesion promotion. Orchem D. & C. TETRONE RUBBER ACCELERATOR: See Accelera tors for Natural and Synthetic Rubber, page 2. TEXTILE ANTISTATIC AGENTS: See Avitex, page 21; Ze/ec, page 7 64. TEXTILE FIBERS: See Fibers, Synthetic, page 65. TEXTILE FIBERS DELUSTERANT: See Titanium Dioxide Pigments, page 153. TEXTILE PROCESSING AGENTS Acids: Formic, page 3. Hydrochloric, page 3. Sulfamic, page 4. Sulfuric, page 5. Albone Hydrogen Peroxide, page 92. Alkanol, page 6. Aridex, page 76. Avitex, page 27. Avitone, page 21. CMTM Flame Retardant, page 42. Decalin, Solvent, page 46. Duponol, page 52. Dyes, page 53. Hexalin, page 97. Hydraphtal, page 92. Ludox, page 100. Merpentine, page 707. Merpol, page 107. MethacrolTM, page 7 02. Ondal, page 109. Perchlorethylene, page 7 70. Product BCO, page 730. Quilon, page 732. Resins (Not Molding): Elvacet, page 734. Elvanol, page 7 35. Elvax, page 735. Lucite, page 7 36. Zytel, page 7 37. Retarder LAN, page 737. Shirlan, page 740. Sitol, page 740. Sodium CMC, page 742. Sodium Perborate Tetrahydrate, page 743. Sodium Peroxide, page 143. Sodium Silicate Solution, page 743. Tetralin, page 757. Trichlorethylene, page 158. Urea, page 160. X-J2 Flame Retardant, page 764. Zelan, page 764. Zelcon, page 164. Ze/ec, page 164. Zepel, page 164. Zesef, page 165. TEXTILE SOFTENERS: See Avitex, Avitone, page 21; Zelcon, page 164. TEXTILE STABILIZERS: See Zeset, page 165. TEXTILE WATER REPELLENTS: See Aridex, page 76; Nalan, page 105; Quilon, page 732; Tyzor, page 759; Zelan, page 764; Zepel, page 764. TEXTILE YARNS: See Fibers, Synthetic, page 65. THERMAL ANALYZER, DIFFERENTIAL: See Instru ments, page 95. THERMALITE IGNITACORD: See Explosives, Blasting Accessories and Supplies, page 60. THERMOFLEX A RUBBER ANTIOXIDANT: See Anti oxidants for Natural and Synthetic Rubber, page 16. THERMOGRAVIMETRIC ANALYZER: See Instruments, page 95. THF: See Tetrahydrofuran, page 151. THINNERS: Automotive: See Finishes, Automotive, page 71. Ceramic: See Ceramic Products, page 27. Dulux: See Finishes, Trade Sales (Consumer Prod ucts), page 82. For Precious Metal Preparations: See Ceramic Prod ucts, page 27. DUP210011297 TH1NNERS-TOLUENE THINNERS (Cent.) Industrial: See Finishes, Industrial,page 76. Lacquers: See Finishes, Refmish, page 72. Lucite Finishes: See Finishes, Automotive (Re tarders), page 70. Retarder Thinner for Duco, Lucite: See Finishes, Refinish, page 73. Retarders: See Finishes, Automotive, page 70. 3,3'-THIODI-7H-BENZ( DE) ANTHRACEN-7-ONE TECHNICAL: Dibenzonthronyl Sulfide. Powder form; a Chemical Intermediate. Orchem D. & C. THIOCYANATE, SODIUM: See Sodium Sulfocyanide, page 143. THIONEX RUBBER ACCELERATOR: See Accelerators for Natural and Synthetic Rubber, page 2. THIOSULFATE, SODIUM: See Sodium Thiosulfate, page 144. THIRAM: See Seed Treatments, Arasan, page 138. THIRAM TECHNICAL: See Fungicides, Thiram Tech nical, page 89. THIURAM ACCELERATORS: See Accelerators for Natural and Synthetic Rubber, page 2. THYLATE THIRAM FUNGICIDE: See Fungicides, page 89. TIN PLATING PROCESS: See Electroplating Products, page 57. TIPERSUL FIBROUS POTASSIUM TITANATE: Crys talline fibers 1 micron in diameter melting at 2500F. Useful to 2200F. USE: High temperature thermal, acous tical and electrical insulations; filter media. FORMS: Lumps, blocks and loose fibers. (Sold only through Wilmington office or West Coast Representative at Pasa dena Office.) Pigments TI-PURE TITANIUM PIGMENTS: See Titanium Di oxide Pigments, below. TIRE BLACK: See Automotive Specialties 7 Products, page 20. TIRE CLEANER: See Automotive Specialties 7 Products, page 20. TIRE LUBRICANT: See Automotive Specialties 7 Prod ucts, page 20. TIRE YARN: See Fibers, Synthetic, page 65. TITANATES, ORGANIC: See Tyzor, page 159. TITANIUM DIOXIDE PIGMENTS: Ti-Pure Titanium Dioxide is available in two types, one in which the titanium dioxide is in the rutile form (as indicated by the suffix R) and the other in which it is in the anatase form. Rutile types of pigment show 20-40% greater tinting strength and opacity than the anatase types. Ti-Pure R Titanium Dioxide Rutile (Titanium Oxide)--Ti02: A fine, dry, white powder; Sp. Gr. 4.2; index of refraction 2.71. Available in various grades with distinctive properties. USE: In paints, linoleum, lacquers, paper, leather, inks, rubber and plastics as a pigment. CONTAINERS: 50-lb. paper bags. Pigments Ti-Pure Titanium Dioxide Anatase (Titanium Oxide)--Ti02: A fine, dry, white powder; Sp. Gr. 3.88; index of refraction 2;53. Available in various grades with distinctive properties. USE: Similar to Ti-Pure R. CONTAINERS: 50-lb. paper bags. Pigments Titanium Dioxide NP (Titanium Oxide)--Ti02: A free-flowing type of dry powder developed especially for use in vitreous enamels for iron, steel and the general ceramic field. Titanium Dioxide NP is not a pigment grade, but a coarse particle size product falling mainly between 80 and 325 mesh. CONTAINERS: 50-lb. paper bags. Pigments TNT: See Trinitrotoluene, page 159. TOILETRIES: Hairbrushes, hand brushes, nail brushes, soap boxes, toothbrush holders. Some soap boxes and toothbrush holders made of Alathon polyethylene resin. Plastics-Products Div. o-TOLIDINE BASE DRY TECHNICAL: Powder form; a Chemical Intermediate. Orchem D. & C. o-TOLIDINE BASE PASTE TECHNICAL: 3,3'-Dimethyl- benzidine. Crystalline paste form; a Chemical Inter mediate. Orchem D. & C. o-TOLIDINE HYDROCHLORIDE TECHNICAL: 3,3'-Di- methylbenzidine dihydrochloride. Paste form; a Chemical Intermediate. Orchem D. & C. TOLL CONVERSION SERVICE: See Metal Products, page 7 02. TOLUENE-2,4-DIAMINE: Sold as 2,4-Tolylenediamine Technical, a Chemical Intermediate. Orchem D. & C. 153 DUP210011298 TOLUENE-TOOLS TOLUENE-2-4-DIAMINE: See Antioxidants for Natural and Synthetic Rubbers, Neozone C., page 16. TOLUIDINE RED PIGMENTS: See Pigment Colors, page 124. P 128 Model: Air Circular Saw, 12-in. blade size, 4 s/u-in. maximum cutting capacity, weight: 33 lbs. Rem. Arms. Concrete Vibrators--Gasoline, Electric and Air m-TOLUIDINE TECHNICAL; Liquid form; a Chemical Intermediate. Orchem D. & C. o-TOLUIDINE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. 1 EV Model: 1 HP Electric Universal motor, 115 volt, AC-DC 10,000 vpm, flexible shaft drive, 2-14-ft. lengths. Choice of heads, 1 'A - or 1 % -in. diameter. Rem Arms. o-TOLUIDINE S2 TECHNICAL: a Chemical Inter mediate. Orchem D. & C. p-TOLUlDINE CAST TECHNICAL: Cast solid form; a Chemical Intermediate. Orchem D. & C. p-TOLUIDINE CAST S TECHNICAL: Cast solid form; a Chemical Intermediate. Orchem D. & C. p-TOLUIDINE FLAKED TECHNICAL: Flake form; a Chemical Intermediate. Orchem D. & C. p-TOLUIDINE NEROL ACID: Sold as 5-Amino-2-(p toluidino) benzenesulfonic acid Technical, a Chemical Intermediate. Orchem D. & C. OTMSA (o-TOLUIDINE-m-SULFONIC ACID): Sold as 2-Aminotoluene-5-sulfonic acid, sodium salt Tech nical, a Chemical Intermediate. Orchem D. & C. 2 EV Model: 116 HP Electric Universal motor, 1 15 or 230 volt, AC-DC 10,000 vpm, flexible shaft drive, 2-14-ft. lengths. Choice of heads, 1 'A - or 1 % -in. diameter. Rem. Arms. 2 PV Model: 1 % HP air motor, 10,000 vpm at 90 psi, flexible shaft drive, 2-14-ft. lengths. Choice of heads, 114 - or 1 % -in. diameter. Rem. Arms. 3 EV Model: 2 HP Electric Universal motor, 115 or 230 volt, 10,000 vpm, flexible shaft drive, 7-21-ft. lengths. Choice of heads, 17/e -, 2% - or 314 -in. diam eter. Rem. Arms 6 PV Model: 372 HP air motor, 10,000 vpm at 90 psi, flexible shaft drive, 7--21-ft. lengths. Choice of heads, 1 7/s -, 23/a - or 314 -in. diameter. Rem. Arms p-TOLUIDINE-o-SULFONIC ACID: Sold as 5-Amino-o- toluenesulfonic acid Technical, a Chemical Inter mediate. Orchem D. & C. 7 GV Model: 6% HP gasoline engine, 7000 vpm, flexible shaft drive, 14-28-ft. lengths. Choice of heads, 1 % - or 2% -in. diameter. Rem. Arms o-( p-TOLUOYL) BENZOIC ACID TECHNICAL: Crys talline solid form; a Chemical Intermediate. Orchem D. & C. 10 GV Model: 6% HP gasoline engine, 7500 to 10,000 vpm, flexible shaft drive, 14-28-ft. lengths. Choice of heads, 1%-, 2%-, 314 or 4'/2-in. diameter. 4-(o-TOLYLAZO)-o-TOLUIDINE (NH2 = 1): Sold as Rem. Arms Aminoazotoluene Technical, a Chemical Inter mediate. Orchem D. & C. 32 GV Model: 3 HP gasoline engine, 3600 vpm, flexible shaft drive, 12-24-ft. lengths. Choice of 2,4-TOLYLENEDIAMINE TECHNICAL: Toluene-2,4- heads, 1 % - or 2 Vi -in. diameter. Rem. Arms diamine. Crystalline solid form; a Chemical Inter f. mediate. Orchem D. & C. EV 26 Model: Electric motor-in-head, 115 volt, t( TOMATO DUST: See Lawn and Garden Products, AC-DC, 7-14-ft. lengths, head 2% -in. diameter. Rem. Arms | page 96. PV 24 Model: Air motor-in-head, 10,000 vpm at 90 TONERS--FOR COLORS: See Pigment Colors, page psi, 7-14-ft. lengths, head 2 Vi -in. diameter. 124. Rem. Arms TONTINE FLAME RESISTANT VINYL DRAPERY MATERIAL: See Coated Fabrics, Vinyl Coated, page 43. Drills--Electric and Air TONTINE WASHABLE WINDOW SHADE CLOTH: See Coated Fabrics, Pyroxylin Coated, page 42. TOOLS, CONSTRUCTION AND INDUSTRIAL: Circular Saws--Air PD 103L Model: 2600 rpm, 14 -in. chuck capacity, 3/16-in. drill capacity; weight: 14 oz. Rem. Arms PD 204L Model: Same as PD 204P except lever throttle; weight: 1 % lbs. Rem.Arms PD 204P Model: Pistol grip, 2200 rpm, 14 -in. drill capacity; weight: 2 lbs. Rem.Arms P 86 Model: Air, 8 Vi -in. Circular Saw, maximum cut ting capacity 2% in., weight 14 lbs. Rem. Arms. PD 304L Model: Same as PD 304P except lever throttle. Rem.Arms DUP210011299 TOOLS TOOLS, CONSTRUCTION AND INDUSTRIAL (Cont.) PGE 1030B Model: Same as PGE 1030L except with PD 304P Model: Pistol trigger, 2500 rpm, 14 -in. button throttle. Rem. Arms heavy duty; weight: 3 lbs. Rem. Arms PGE 1030L Model: Lever type, 30,000 rpm small wheel grinder for 14-in. vitrified or 1 in. organic PD 326P Model: Pistol grip, 1400 rpm, % in.-heavy wheels; weight: 12 oz. Rem. Arms duty; weight: 45/s lbs. Rem.Arms PGE 2022L Model: 22,000 rpm small wheel grinder, PD 328P Model: Pistol grip, 575 rpm, 16 -in.; weight: lever throttle for 1-in. vitrified or 1 16 -in. organic 4% lbs. Rem.Arms wheels; weight: 1 14 lbs. Rem. Arms PD 508G Model: Grip handle trigger, 950 rpm, heavy duty, 16 -in. capacity; weight: 916 lbs. Rem. Arms PDA 224L Model: Angle drill, 1600 rpm, 14 -in. capacity; weight: 1 % lbs. Rem. Arms PDA 318L Model: Angle drill, 950 rpm, 16-in. capacity; weight: 514 lbs. RemArms Flexible Shaft Grinders KGfc 2 I 'JL'JLL Model: same as z u z z l except witn ex tended spindle; weight: 1 Va lbs. Rem. Arms PGK 1 030B Model: Button type, 30,000 rpm, 14 -in. collet, midget die grinder; weight: 12 oz. Rem. Arms PGK 1030L Model: Lever type, 30,000 rpm, 14 -in. collet midget die grinder; weight: 12 oz. Rem. Arms PGK 2022L Model: 22,000 rpm, lever type, 14-in. collet, midget die grinder; weight: 1 Vfe lbs. Rem. Arms 1 EG Model: Va HP, single phase, 115 or 230 volts, 6-ft. shaft, 3450 rpm, available with hanger pedestal or round base mounting, straight and angle spindles, available accessories. Rem. Arms 5-FG Model: Same as 1 EG except HP and phase-- 116 HP, 3 phase, 220 or 440 volts. Rem. Arms 6 EG Model: Same as 1 EG except HP which is 116 HP. Rem. Arms 7 FG Model: Same as 1 EG except HP and phase-- 3 HP, 3 phase, 220 or 440 volts. Rem. Arms PGK 2122L Model: Lever type, 22,000 rpm, 14-in. collet, midget die grinder with extended spindle; weight; 1% lbs. Rem. Arms Hammer Drills Hammer Drive Tool, Remington Fastening Pins (For use in Model 430 Pin Boy): Special hard alloy steel. Three general types--Headed, Threaded and Wire loop--17 varieties for spiraled fastening uses. Pin is hold in barrel of tool by detent washer on pin. Maximum pin diameter is 5/32 in.; threaded size 14 in.-20 NC. Rem. Arms Gasoline Trowels T 428 Model: 28-in. capacity, 100 lbs; four blade trowel supplied with combination float finish blades 6 in. X 1016 in. Rem. Arms T 434 Model: 34-in. capacity, 130 lbs., four blade trowel available with float or finish blades. Rem. Arms T 444 Model: 44-in. capacity, 216 lbs., four blade trowel supplied with finish or float blades. Rem Arms Grinders--Air PG 506G Model: 6000 rpm grinder for 4-in. vitrified or 6-in. organic wheels; weight: 85/s lbs. less wheel guard. Rem. Arms PG 2022L Model: 22,000 rpm grinder for 1-in. vitri fied or 1 16-in. organic wheels; weight: 1% lbs. less wheel guard. Rem. Arms PG 3018L Model: Small wheel grinder for 1 14 -in. vitrified or 2-in. organic wheels; weight: 2% lbs. less wheel guard. Rem. Arms Pin Boy Model 430 Hammer Drill: A simplified tool hammer activated for driving fastening pins of spe cially alloyed hardened steel into masonry, concrete and steel. Rem. Arms Roto-Ram Model 125-H Hammer Drill: 16-in. chuck capacity, 500 rpm, 115 volts. Used for drilling holes into masonry, concrete, brick, cement, cinder block, tile, marble, stone. Two-in-one tool is capable of drilling and hammering at 3500 blows per minute. Can also be used as a standard drill for drilling into wood or steel. Weight: 1016 lbs. Rem. Arms Roto-Ram Model 381-H Hammer Drill: 3/s-in. chuck capacity, 800 rpm, 115 volts. Used for drilling holes into masonry, concrete, brick, cement, cinder block, tile, marble, stone. Two-in-one tool is capable of drilling and hammering at the rate of 5,600 blows per minute. Can also be used as a standard drill for drilling into wood or steel. Weight: 7 lbs. Rem. Arms impact Wrenches--Electric and Air PW 206P Model: Air, 16-in. square drive, %-in. capacity, reversible; weight: 3Va lbs. Rem. Arms 155 DUP210011300 TOOLS TOOLS, CONSTRUCTION AND INDUSTRIAL (Cent.) PW 308P Model: Air, V2 -in. square drive, %-in. capacity, reversible; weight: 6 lbs. Rem. Arms PW 4012P Model: Air, %-in. square drive, %-in. capacity, reversible; weight: 11 lbs. Rem. Arms PW 5014S Model: Air, %-in. square drive, 1-in. capacity, reversible; weight: 19% lbs. Rem. Arms PW 6020S Model: 1 -in. square drive, 1 % -in. capacity, reversible; weight: 2914 lbs. Rem. Arms Masonry Fasteners Taper Tite Masonry Fasteners: Used for fastening various objects to concrete, brick, cement, under block, cement block, tile, mortar, marble, stone and rock. Fasteners are constructed such that drilling of oversize holes is virtually eliminated. They are preassembled and ready for application without the need of special tools. Fasteners are available in %-, 5/16-, %-, Vi and % -in. diameters and in 1 % -6-in. lengths. Rem. Arms Right Angle Nut Setters--Air PNA 316L Model: 950 rpm, V2 -in. square drive spindle, % -in. bolt capacity; weight: 4 lbs. Rem. Arms Sanders, Polishers--Air PSA 307L Model: 7-in. disc sander, 5900 rpm, % -11 spindle thread; weight: 5% lbs. Rem. Arms PPA 309L Model: Polisher for use with 9-in. polishing bonnet, 950 rpm, %-ll spindle thread; weight: 4% lbs. Rem. Arms Screwdrivers--Electric and Air PSD 103L Model: Adjustable ball clutch, 2600 rpm, maximum capacity No. 8 free running screws. No. 5 heavy tapping screws with bit and finder, non- reversible; weight; 1 Vs lbs. Rem. Arms PSD 204L Model: Same as PSD 204P except with lever throttle. Rem. Arms PSD 204P Model: Adjustable ball type clutch, 2000 rpm capacity, % -in. free running screws. No. 10 heavy tapping screws furnished with bit and finder, pistol grip, nonreversible; weight: 2 lbs. Rem. Arms PSD 306P Model: Adjustable ratchet type clutch, 2500 rpm, maximum capacity, %-in. free running screws, pistol grip, nonreversible; weight: 4 lbs. Rem. Arms PSDR 204P Model: Adjustable ball type clutch, 1500 rpm maximum capacity, % -in. free running screws. No. 10 heavy tapping screws, reversible; weight: 2-7/16 lbs. Furnished with bit and finder. Rem. Arms PSDR 306P Model: Adjustable ratchet type clutch, 2500 rpm capacity, % -in. free running screws, re versible; weight: 414 lbs. Furnished with bit and finder. Rem. Arms TOOLS, POWDER ACTUATED 1 Hole Punchers Hole Puncher, Model 414 Hole Puncher: A triggeroperated powder actuated tool for punching %-, Vi - and % -in. diameter holes in mill 14 -in. steel. Uses a special 22 caliber powder load of graded strength depending on the size hole being punched. Rem. Arms Hole Puncher Power Loads--Special 22 Caliber Rim Fire: Seven graded powder charges color coded for easy selection, give the hole puncher the right power for a wide variety of hole making tasks in 14 -in. steel. Rem.Arms Humane Stunners, Power Loads and Cartridges Humane Stunner Cartridges, Remington Stun Safe Humane Stunning Cartridges--22 Caliber Rim Fire. Available as SS-19 and SS-13: For industrial use only. Special composition projectile contains no lead, is nontoxic. Features "Concussion Cone" bullet design, up to 2000 feet-per-second velocity; automatic fragmentation on contact with hard surface, Klean- bore priming. For use in any 22 caliber "Long Rifle" cartridges. Rem.Arms Humane Stunner Power Loads: Special 22 caliber crimped shot case blank power loads. Available in five graded loadstrengths:Strengths indicated by color dip on nose of loadcase. Rem.Arms Model 41 IB Remington Humane Stunner: A single shot, bolt action tool for stunning animals (cattle, hogs, sheep) in meat packing houses. Contact-trigger operated. Short-travel piston with affixed concussion knob delivers blow of sufficient force to render animal unconscious prior to slaughter. Knobbed bolt handle, extended wooden operating handle; two-hand opera tion. Rem. Arms Model 41 1C Remington Humane Stunner: Similar in design to Model 41 IB but employing a sleeve type bolt and an automatically retracting penetrator rod instead of a concussion knob. Extended wooden handle; two-hand operation. Rem. Arms Model 412 Remington Humane Stunner: Similar to Model 411C in that it employs sleeve bolt and auto matically retracting penetrator rod. Lever control; 156 DUP210011301 TOOLS TOOLS, POWDER ACTUATED (Cont.) can be held and fired with one hand. Does not include extended wooden operating handle. Rem. Arms Model 412A Remington Humane Stunner: Similar to Model 412 in that it employs sleeve bolt and lever control and does not have extended wooden operat ing handle. Features a 2 -in. diameter concussion knob instead of penetrator rod. Rem. Arms Model 413 Remington Humane Stunner: Similar to model 41 IB in that it employs knobbed bolt handle, etc. Features short handle, 2%-in. diameter con cussion knob. Rem. Arms Remington Stun Safe Rifle: A 22 caliber contact trigger rifle designed solely for the stunning of meat animals. Uses both the SS-19 and SS-13 Stun Safe Cartridges. A repeater-type with capacity of 17 5S- 19's and 22 SS-13's. Design features a contact method of firing which eliminates air-firing. USE: Slaughtering and packing houses. Rem. Arms Remington Industrial Gun and Shells Model 401 Remington Industrial Gun: For remov ing clinker rings and balls which form in rotary kilns used in the manufacture of cement, refractories, lime, lightweight aggregates, lime sludge, etc. Weight of gun and mount 176 lb. Rem. Arms Remington Industrial Shells: Used in the Model 401 Remington Industrial Gun. Approximately 8 gauge. Muzzle energy, 7475 ft.-lb. Muzzle velocity, 1600 ft. per second. Also made in Magnum. Muzzle Energy 9000 ft.-lb. Muzzle velocity 1700 ft. per second. Featuring the exclusive polyethylenebody and Klean- bore primer. Rem. Arms Stud Drivers and Accessories Accessory Fittings: Couplings, tension washers, eye nuts, conduit clips, discs, etc., for special fastening uses. Rem. Arms K-l Captive-StudTM Kit: Built-in arresting buffer prevents free flight of studs in case of over-penetration in soft construction materials. Weight: 6 lb. Rem. Arms K-2 'A-in. Light Duty Barrel Kit: Anchors 'A-in. diameter studs with 22 caliber standard power loads. Weight: 314 lb. Rem. Arms K-3 Vs -in. Medium Duty Barrel Kit: Anchors %-in. diameter studs with 22 caliber special power loads. Weight: 3 lb. Rem. Arms K-4 Vs -in. Medium and HeavyDuty Barrel Kit: Anchors %-in. diameter studs with 32 caliber power loads. Weight 4 lb. Rem. Arms K-1 1 Low Velocity Light Duty Kit (For use in Model 462 Low Velocity Stud Driver); Piston driver fea tures permit driving studs for lighter application using the low velocity principle resulting in a lower cost 22 caliber power load and stud. Rem. Arms K-12 'A-in. Light Duty Barrel Kit: Used on Model 462 standard compact for anchoring 14 -in. diameter studs with 22 caliber standard power loads. Rem. Arms K-13 Vs -in. Medium Duty Barrel Kit: Used on Model 462 standard compact for anchoring Vs -in. diameter studs with 22 caliber standard power loads. Rem. Arms Mighty-MiteTM Stud Driver-Remington Model 456: A highly simplified, single shot, hammer-operated, powder-actuated fastening tool. Made with A -in. barrel in 22 caliber rim fire for driving 'A -in. studs only into construction materials as described below. Weight 33A lb. Rem. Arms Model 455A Remington Power-Mate Stud Driver: A trigger-operated powder actuated basic unit. May be equipped with any one of four barrel kits to make up a stud driver for driving alloy steel studs into con crete, steel and similar hard construction materials and for fastening other materials (wood, sheet metal, insulation, fixtures, etc.) to concrete or steel base materials. Weight: 5A lb. Rem. Arms Model 462 Standard Compact (Or Model 462 Low Velocity Compact); A three-in-one trigger-operated stud driver. May be equipped with any one of three barrel kits for driving 14 -In., %-in. or lighter type studs (for low velocity model) into concrete, steel and other hard construction materials when fastening (wood, sheet metal, insulation, fixtures, etc.) to con crete or steel base materials. Rem. Arms Special Guards for Model 455A Stud Driver: Inter changeable with standard guard. Guards conform to shape of prefabricated building materials and fittings, permit driving studs in hard-to-reach places. Rem. Arms Stud Driver Low Velocity Power Loads--Special 22 Caliber Rim Fire: Th ree graded powder charges in 22 caliber to control penetration of light duty studs or pins in construction materials. Color code on head of brass case identifies powder charge. Rem. Arms Stud Driver Power Loads--Special 22 and 32 Caliber Rim Fire: Six powder charges in 22 caliber and five in 32 caliber to control penetration of A-in. diameter and % -in. diameter fastening studs re spectively in construction materials. For medium duty applications, %-in. studs may be used in combination 157 DUP210011302 TOOLS-TRICHLORETHYLENE Hj TOOLS, POWDER ACTUATED (Cont.) with 22 caliber power loads. Color of wad crimped into brass case identifies powder charge. Rem. Arms Studs for Construction Fastening; Special hard alloy steel. Four general types--standard head, break-off head, internal thread, external thread--53 varieties for specialized fastening uses. Stud is held in barrel by oversize paper Power GuideTM retainer disc cemented to head of stud. Maximum stud diam eter is % in.; thread sizes % in.-16 N.C., Vi in.-20 N.C. and 10--24 N.C. Rem. Arms TOOTHBRUSH HOLDERS: See Toiletries, page 153. TOOTHBRUSHES: A line comprising all the well-known and accepted styles for adults and children, sold under the trademarks Arlton, DentabestTM, Paramount, Park AvenueTM and Denta-Flex, bristled with Tynex nylon. Toothbrushes made with Zytel nylon handles are marked All nylon. Toothbrushes are packaged in trans parent plastic utility containers and in boxes wrapped in cellophane. Also a line of brushes for dentures and an automatic (electric) toothbrush. Plastics-Products Div. TOVAL GELATIN: See Explosives, Dynamites, page 63. TOVEX GEL: See Explosives, Blasting Agents, page 62. TOWN AND COUNTRY FLAT WHITE ENAMEL: See Finishes, Trade Sales (Consumer Products), page P. TRAFFIC PAINT: See Finishes, Trade Sales (Consumer Products), page 83. TRAIL RIDERTM RIFLE: See Arms, page 17. Remington Autoloading Model 100T and 200S Trap: Holds 203 targets. Connects to standard 110 volt power supply. Easy to adjust for windage, eleva tion and tilt. Models for trap and skeet shooting. Rem. Arms Remington Hand Target Thrower: Light and easy to operate. Duplicates every type of wing shot by throw ing targets any way desired. "The spring does the work." Rem. Arms Wonder Slceet Outfit--Single Lever: Includes two Wonder Traps, single lever skeet pull and galvanized wire. No additional accessories necessary. Can be adapted to electric release. Rem. Arms Wonder Skeet Outfit--De Luxe Electric: For DC or AC operation--DC outfit consists of two Wonder traps with electrical releases and accessories. For AC operation a Remington AC adapter is supplied in addition to DC equipment. Rem. Arms TREE WOUND DRESSING: See Lawn and Garden Products, page 97. TRICHLORETHYLENE--C2HCI3: A clear colorless liquid with ethereal odor; miscible with alcohol, ether and most organic solvents; practically insoluble in water; stable in the presence of moisture,- practically nonflammable and nonexplosive. Available in six grades. CONTAINERS: 55-gal. (660-lb.) drums and tank cars. Electrochem. Grades: Freezing-Point Depressant Grade: Weight per gal. 12.21 lb. at 20C. USE: Freezing-point depressant for fire extinguisher fluids. TRAP LOADS: See Ammunition, page 11. TRAPS AND TARGETS Blue Rock Skeet Outfit: Includes two Blue Rock traps, single lever control and same accessories as furnished with Wonder Single Lever Skeet Outfit. Moderately priced. Rem. Arms Blue Rock Targets: Clean to handle; easy to see. They smoke on impact of shot charge. With chrome yellow dome and flywheel action. USE: In all target traps which throw standard targets. Rem. Arms Metal Degreasing Grade (Triclene D Trichlorethylene): Boiling range 187.7--190.2F. (86.5- 87.9C.). Weight per gal. 12.16 lb. at 20C. USE-. Specifically stabilized for vapor degreasing of metals,low temperature heat transfer liquid. Missile-Degreasing Grade (Triclene MD Trichloro ethylene): Boiling range 187.7--190.2F. (86.5- 87.9C.). Weight per gal. 12.16 lb. at 20C. USE: Fully stabilized, high-purity, dual-purpose solvent for cleaning missile components by vapor degreasing or room-temperature flushing; leaves no residue sensitive to liquid oxygen. Blue Rock Trap: Ideal for skeet or trapshooting at small clubs and private estates. Throws single and double targets for trapshooting. Shovel-type carrier. Easy to install and operate. Moderately priced. Rem. Arms ExpertTM Trap: For camps, cottages, boat and motor trips and installations having a multiple trap layout. Light-weight, portable; strong construction. Rem. Arms Missile-Electronic Grade (Triclene ME Trichloro ethylene): Boiling range 187.7-l89.5F. (86.5- 87.5C.). Weight per gal. 12.23 lb. at 20C. USE: Lightly stabilized, high-purity solvent for critical clean ing, flushing and rinsing applications in the missile and electronic industries. Suitable for extraction of many waxes, resins and alkaloids. Paint Grade (Triclene Paint Grade Trichlorethylene): Boiling range 185.7-190.2F. (86.5-87.9C.). DUP210011303 TRICHLORETHYLENE-UNDERLAY TRICKLORETHYLENE (Cont.) Weight per gal. 12.15 lb. at 20C. USE: As a thinner tor paints based on several types of alkyd resins; on asphaltic materials, including Gilsonite; and on some specialty resins, such as certain acrylics, epoxy esters, chlorinated rubbers, ethyl cellulose, etc. Technical and Dry Cleaning Grade (Triclene Trichlorethylene): Boiling range 187.9-1 90.4F. (86.6-88.0C.). Weight per gal. 12.19 lb. at 20C. USE: Dry cleaning and spotting fluid; textile cleaning; solvent for adhesives and waxes,- asphaltic paint re mover,- for coating paper; organic reagent. TRICHLOROFLUOROMETHANE: See freon Products, Freon-11, page 85. TRICHLOROMETHANE: See Chloroform, page 40. TRICHLOROTRIFLUOROETHANE: See Freon4 Products, Freon-113, page 86. TRICLENE PHOSPHATIZING SOLUTIONS: Clear, lightly colored liquids with ethereal odor; slightly acidic,practically nonflammable and nonexplosive. Available in several grades which contain active phosphatizing compounds, reaction modifiers and stabilizers in trichlorethylene as solvent. USE: Maintenance of trichlorethylene-based baths used to produce phosphate coat ings on metal surfaces. These coatings protect metal "in storage" and give improved substrates for sub sequent painting. Process requires special equipment based on the vapor degreasing principle. CONTAINERS: 55-gal. drums, tank cars and tank trucks. Electrochem. TRICLENE TRICHLORETHYLENE: See Trichlorethylene, page 158. 1,3,5-TRIETHYLBENZENE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. TRIFLUOROMETHANE: See Freon Products, Freon-23, page 86. TRIMETHYLAMINE--ANHYDROUS AND AQUEOUS SOLUTIONS--TECHNICAL, N(CH3)3: Anhydrous- colorless gas, clear and water-white when liquefied. USE: Intermediate for choline salts (animal feed supple ment) and quaternary ammonium salts; in organic syn thesis; in manufacture of ion exchange resins and pharmaceutical intermediates. CONTAINERS: Anhydrous -- 100-lb. cylinders, 600-lb. cylinders, tank cars and tank trucks. Aqueous Solution--55-gal. drums, tank cars and tank trucks. Ind.&Bio.-Ind. 1,3,3 - TRIMETHYL - A2 " - INDOLINEACETALDEHYDE TECHNICAL: Fischer's Aldehyde. Granular paste form; a Chemical Intermediate. Orchem D. & C. 1,3,3-TRIMETHYL-2-METHYLENEINDOLINE TECH NICAL: Fischer's Base. Liquid form; a Chemical Inter mediate. Orchem D. & C. TRINITRIN: See Nitroglycerin,--Beta Lactose Mixture, page 107. 2,4,6-TRINITROPHENOL: Sold as Picric Acid Technical, a Chemical Intermediate. Orchem D. & C. TRINITROTOLUENE (TNT)--C7H506H3: Pale yellow, flaked soiid. USE: As an intermediate in the dye industry, in the manufacture of deionators and explosive special ties; military explosives. CONTAINERS: 60-lb. net fiber boxes. Explo.-C.P.S. TRYSBEN 200 WEED KILLER: See Weed and Brush Killers, Trysben, page 163. TUFCOTETM FURNITURE LACQUER SEALERS: See Finishes, Industrial, page 75. TURF FUNGICIDE: See Fungicides, Turf, page 89. TURTLEBACK CAR WASHING SPONGE: See Sponges, Cellulose, page 144. TV RECORDING FILM: See Photographic Products, page 121. TWO-SIXTY-TWO FEED COMPOUND: See Nutrition and Therapy Products, page 109. TYNEX NYLON FILAMENTS: See Plastics, page 128. TYZOR ORGANIC TITANATES: Simple and chelated esters of ortho titanic acid of varying reactivity. Solventsoluble and water-soluble types for use as chemical intermediates, primers for adhesion promotion in extru sion coating, dispersants, reaction catalysts, scratchresistant finishes on glass, masonry water repellents and cross linking agents. See also Tetrabutyl Titanate Tech nical, page 151; Tetraisopropyl Titanate Technical, page 151; Tetrakis (2-Efhylhexyl) Titanate Technical, page 151; Tetrastearyl Titanate Technical, page 152. Orchem D. & C. U UAL-K; UAL-37; UAL-S: See Fertilizers, Uramon, page 64. UNDERCOATS: See Finishes, Automotive, page 70; Finishes, Refinish, page 72. UNDERGLAZE PIGMENTS: See Ceramic Products, page 27. UNDERLAY, RUG: See Coated Fabrics, Rug Anchor, page 42. 159 DUP210011304 UN3CELTM-VARIABLE UNICELTM BLOWING AGENTS (See Also Blowing Agents for Natural and Synthetic Rubber, page 23.) UnicelTM ND Blowing Agent: Cream-colored powder containing 40% N-N'-dinitrosopentamethylenetetramine (DNPT) and 60% inert filler. Gas generant which releases nitrogen under controlled heating. Stable up to 180-185C. but can be activated to decompose at lower temperatures. USE: For in corporation in elastomers or resins as a source of gas for forming cellular or sponge materials in a wide range of densities. CONTAINERS: 100-lb. fiber drums. Explo.-C.P.S. UnicelTM NDX Blowing Agent: Cream-colored solid containing 80% N-N'-dinitrosopentamethylenetetramine and 20% by weight of plasticizer. Has properties similar to UnicelTM ND but provides twice volume of gas per unit weight. USE: As gas generant in preparation of foamed or cellular elastomers or plastics where the inert filler in UnicelTM ND may be objectionable. CONTAINERS: 100-lb. net fiber drums. Explo.-C.P.S. UNIVERSAL TINTING COLORS: See Finishes, Trade Sales (Consumer Products), page 83. UPHOLSTERY CLEANER, AUTO: See Automotive Specialties 7 Products, page 19. URAMITE UR FA FORM FERTILIZER: See Fertilizers, page 64. URAMON AMMONIA LIQUORS: See Fertilizers, page 64. UREA, CRYSTAL NF (CARBAMIDE)--(NH2)2CO: White crystals, M. P. 132.7C.; Sp. Gr. (solid) 1.335. USE: Manufacture of urea-formaldehyde resins for ad hesives, protective finishes, molding powders, foundry core binders and treatment of paper and textiles; for treating wood and textiles; solubilizing agent for starches and proteins in adhesives and paper coatings; softening agent for paper and cellulose; intermediate in the man ufacture of chemicals, dyes and pharmaceuticals; in gredient in fire-retardant paints; ammoniated dentifrices; in the preparation of skin creams, lotions and deodor ants; stabilizer in explosives; blowing agent for porous articles (foamed latex, sponges); dewaxing of oils and medicinal purposes. CONTAINERS: 100-lb. paper bags. Ind.&Bio.-Ind. UREA, SHOTTED TECHNICAL (CARBAMIDE) -- (NH2)2CO: Small round white pellets which remain relatively free-flowing and non-caking. USE: Same as crystal urea, except where NF grade is required. CON TAINERS: 100-lb. paper bags. Ind.&Bio.-Ind. UREA FORMALDEHYDE 25-60: Clear, colorless, stable urea formaldehyde reaction product with F/U molecular ratio of approx. 4.8 to 1. Contains (by weight) 60% formaldehyde, 25% urea and 15% water. Weight per gal. 11.1 lb. USE: As a starting material for the preparation of urea formaldehyde resins for the plastics, textile, paper, foundry, chemical and wood industries. CONTAINERS: 55-gal. drums, tank trucks and tank cars. Ind.&Bio.-Ind. UREA NITROGEN FERTILIZER 46%: See Fertilizers, page 65. URETHANE FOAM-ISOCYANATES FOR: See Hylene Organic Isocyanates, page 93. URETHANE RUBBER: See Synthetic Rubber, Adiprene, page 146. URETHANES, POLYESTER RESIN: See Finishes, Auto motive, Dulux Foam Resin, page 69. 6,6'-UREYLENEBIS(l -NAPHTHOL-3 - SULFONIC ACID): Sold as J Acid Urea Technical, a Chemical Intermediate. Orchem D. & C. UROTROPIN: See Hexamethylenetetramine, page 91. V VALCLENE DRYCLEANING FLUID: Clear fluorocar bon formulations with slight ethereal odor; nonflam mable and nonexplosive. Available in three forms. Eiectrochem. Valclene 1 Drycleaning Fluid: B. P. approximately 1 18F. (47.78C.). Weight per gal. 13.0 lb. at 70F. USE: As drycleaning fluid in specially designed coinoperated installations. CONTAINERS: 5-gal. (65-lb.) pails and 55-gal. (690-lb.) drums. Valclene 200 Drycleaning Fluid: Concentrated formulation. Weight per gal. 12.0 lb. at 70F. USE: To replenish the active agents in Valclene 1 dry cleaning fluid depleted in use. CONTAINERS: 5-gal. (60-lb.) pails. Valclene 350 Drycleaning Fluid: Concentrated formulation. Weight per gal. 11.0 lb. at 70F. USE: To replenish active agents in Valclene 1 drycleaning fluid depleted in use. CONTAINERS: 5-gal. (55-lb.) pails. VALRON UREAFORM SOLUTION: See Fertilizers, page 65. VALVE, PIPE AND FITTINGS: See Surplus Materials, page 146. VAPOR DEGREASING COMPOUNDS: See Freon TF Solvent, page 88; Perchlorethylene, page 110; Tichlorethylene, page 158. VARIABLE CONTRAST PAPERS: See Photographic Products, page 118. 160 DUP210011305 VARIGAM-VVATCHUh!GTM VARIGAM PHOTOGRAPHIC PAPERS: See Photo graphic Products, page 1 22. VARILOUR PHOTOGRAPHIC PAPERS: See Photo graphic Products, page 122. VARNISHES: See Finishes, page 68. VAZO VINYL POLYMERIZATION CATALYST (AZOBISISOBUTYRONITRILE): A white powder; in soluble in water, soluble in a variety of organic solvents and vinyl monomers. Melts at 105C. with decomposi tion. USE: A free radical generator, initiated thermally at temperatures above 45C., optimum activity range 45-100C. Extremely effective catalyst for vinyl poly merizations. Can be used for bulk, solution or suspension polymerization for all common vinyl monomers including styrene, ethylene, vinyl chloride, acrylonitrile, methyl methacrylates, methyl acrylate, vinyl acetate and their copolymers, and for curing unsaturated polyester resins. CONTAINERS: 10-lb. and 100-lb. net weight fiber drums. Ind.&Bio.-Ind. VEGETABLE GARDEN DUST: See Lawn and Garden Products, page 96. VELOUR BLACK PHOTOGRAPHIC PAPER: See Photographic Products, page 122. VESPEL DIAMOND ABRASIVE WHEELS: See Plastics, Vespel, page 128. VESPEL FABRICATED PARTS: See Plastics, Vespel, page 128. VEXAR PLASTIC NETTING: Integrally extruded plas tic mesh material available in a wide variety of forms and colors. Vexar plastic netting is produced from both low and high density polyethylene and polypropylene and exhibits the outstanding chemical inertness and re sistance to moisture, rot and mildew which are char acteristic of these resins. Mesh size and filament diam eter may be varied over a broad range to give products suited to a wide variety of applications. It is available in commercial quantities as sheeting, layflat tubing, rigid piping and fabricated bags. Uses for Vexar in clude packaging, particularly produce for which product ventilation is desirable, shelf lining, decorative covers, filtration, display materials, and many others. Film VIBRATORS, CONCRETE: See Tools, Construction and Industrial, page 154. VICTOR SHOTGUN SHELLS AND LOADS: See Am munition, page 13- VINYL COATED FABRICS: See Coated Fabrics, Fabrilite and Tontine, page 43. VINYL DRAPERY MATERIAL: See Coated Fabrics, Tontine, page 43. VINYL FLUORIDE: See Freon--Other Products, page 88. VINYL POLYMERIZATION CATALYST: See Vazo Vinyl Polymerization Catalyst, above. VINYL RESINS: See Resins (Not Molding), Elvacet, Elvancl, and Elvax, pages 134 and 135. VINYLIDINE FLUORIDE: See Freon--Other Products, page 88. VIOLANTHRONE TECHNICAL: Dibenzanthrone. Amorphous powder form; a Chemical Intermediate. Orchem D. & C. VIOLET BN ACID ANTHRAQUINONE: Sold as N,N'- 1,5-Anthraquinonylenediathranilic acid Technical, a Chemical Intermediate. Orchem D. & C. VITON FLUOROELASTOMERS: See Synthetic Rubber, page 150. VITRIOL, OIL OF: See Acids, Sulfuric Acid, page 5. VOLAN BONDING AGENT--METHACRYLATO CHROMIC CHLORIDE: A Werner type chromium com plex in isopropanol. USE: As a bonding agent applied to glass fibers used in reinforced plastic laminates to im prove the adhesion between glass and resin, especially under moist conditions; to improve adhesive bond between other hydrophilic surfaces such as paper and wood end polymeric coatings or impregnants. CON TAINERS: 15- and 53-gal. drums. Ind.&Bio.-Ind. VOLTOHMETER: See Explosives, Blasting Accessories and Supplies,page 67. VPM SOIL FUMIGANT: A solution containing 32.7% sodium methyldithiocarbamate. USE: For control of certain weeds, soil-borne fungus diseases, nematodes and garden centipedes as a pre-planting treatment to soil in plant propagation beds (ornamentals, vegetables and in certain states, tobacco); in the preparation of new turf areas and destruction of old turf prior to re seeding and for ornamental plants, food and fiber crops as a pre-planting treatment in the field. CONTAINERS: 1-gal. bottles (4 in a case), 5- and 30-gal. drums (non- returnable). Ind.&Bio.-Bio. VYDAX FLUOROCARBON TELOMERS: Chemically and thermally stable, insoluble, nonflammable, dry lubri cants and release agents. Orchem D. & C. w WARMTONE PHOTOGRAPHIC PROJECTION PAPER: See Photographic Products, page 122. v-wWATCHUNGTM RED PIGMENTS: See Pigment Colors page 124. ( 161 DUP210011306 WATER-WEED WATER DISPERSIBLE COLORS: See Pigment Colors, range of annual and perennial grasses and herba i page 124. ceous weeds, being particularly useful for control of i WATER GLASS: See Sodium Silicate Solution, page 143. perennial grasses. Recommended for non-cropland areas such as railroads and pipeline right-of-ways, WATER PUMP LUBRICANT: See Automotive Special petroleum tank farms, lumberyards, storage areas ties 7 Products, page 18. and industrial plant sites. CONTAINERS: 4-lb. bags WATER REPELLENTS, MASONRY: See Tyzor, page 159. (12 in a case) and 50-lb. fiber drums. Ind.&Bio.-Bio. WATER REPELLENTS, TEXTILE: See Aridex, page 16; Nalan, page 105; Quilon, page 132; Tyzor, page 159; Zelan, page 164; Zepel, page 164. WATERPROOF CEMENTS: See Cements, page 26. Hyvar X-WS Bromacil Weed Killer: A water . . i l i. L, .. , .1 __________________ rrvo/- c l_________o_____U..*. .1 bOlUUie puwutl CUll l u IIII i iy uu /u J'ui u i ii u *<j -j c v .-w u i yi- 6-methyluracil (bromacil). Dissolves rapidly in water to form true solutions at recommended spray con centrations; requires no agitation once powder is dis WATER WORK BOOSTER: See Explosives, Blasting Agents, page 62. WAX, AUTOMOTIVE: See Automotive Specialties 7 Products, page 19. WAX, FLOOR: See Professional Floor Maintenance Products, page 131. WAX REMOVER AND ALL PURPOSE CLEANER: See Professional Floor Maintenance Products, page 131. WAX WASH LIQUID CAR WASH: See Automotive Specialties 7 Products, page 20. WEED AND BRUSH KILLERS: (See Also Lawn and Garden Products, page 98.) Ammate X Weed and Brush Killer: Water-soluble crystals containing 95% ammonium sulfamate. USE: Particularly effective for control of woody plants. Usually used as a foliage spray to control most species of brush. May be applied to freshly-cut surfaces dry or in solution to prevent sprout growth from stumps or to kill weed trees. CONTAINERS: 50- and 60-lb. bags. Ind.&Bio.-Bio. Ammate Weed and Brush Killer Solution: This product contains 5.6 lb. of Ammate X Weed and Brush Killer per gal. For railroad use in tank car lots only. Ind.&Bio.-Bio. solved. USE: Same as Hyvar X Bromacil Weed Killer. CONTAINERS: 4-lb. bags (12 in a case) and 50-lb. fiber drums. Ind.&Bio.-Bio. Karmex DL Diuron Weed Killer: A stable liquid suspension containing 28% 3-(3,4-dichlorophenyI)1,1-dimethylurea (diuron). USE: For weed control in cotton. CONTAINERS: /z -gal. cans (6 in a case). Ind.&Bio.-Bio. Karmex Diuron Weed Killer: A wettable powder containing 80% 3-(3,4-dichlorophenyl)-l,1-dimethylurea (diuron). USE: Selective weed control in certain crops such as sugar cane, cotton, pineapple, alfalfa, citrus, grapes and peppermint. Also used as a non-selective weed killer on sites where bare ground is desired such as utility, highway, pipeline and railroad right-of-ways, petroleum tank farms, lumberyards, industrial plant sites, irrigation and drainage ditches and around farm buildings. CONTAINERS: 4-lb. bags (12 in a case) and 50-lb. fiber drums. Ind.&Bio.-Bio. LoroxTM Linuron Weed Killer: A wettable powder containing 50% 3-(3,4-dichlorophenyl)-l-methoxy- 1-methylurea (linuron). USE: For selective control of annual weeds in corn and soybeans and certain other crops. Used as a pre-emergence spray in soy beans and as a pre-emergence or directed post emergence spray in corn. CONTAINERS: 4-lb. bags (12 in a case). Ind.&Bio.-Bio. Dybar Fenuron Weed and Brush Killer: Pellets containing 25% 3-phenyl-l, 1-dimethylurea (fenuron). USE: For control of certain undesirable woody plants such as oak, birch, locust, maple, pine, poplar and elm on fence rows, drainage ditches, utility and rail road right-of-ways, pastures and rangeland, and other non-cultivated areas. CONTAINERS: 4-lb. bags (12 in a case), 10-lb. canisters (4 in a case) and 50-lb. bags. Ind.&Bio.-Bio. Hyvar X Bromacil Weed Killer: A wettable powder containing 80% 5-bromo-3-sec-butyl-6-methyluracil (bromacil). USE: As a non-selective weed killer on sites where bare ground is desired. Controls a wide LoroxTM L Linuron Weed Killer: A stable liquid sus pension containing 33.5% 3-(3,4-dichlorophenyI)- 1-methoxy-l-methylurea (linuron). USE: Same as Lorox Linuron Weed Killer. CONTAINERS: Vi -gal. cans (6 in a case). Ind.&Bio.-Bio. Telvar ML Mon uron Weed Killer: A stable liquid suspension containing 28% 3-(p-chlorophenyl)- 1,1-dimethylurea (monuron). USE: For pre-emergence weed control in cotton, on heavy soil types only. CON TAINERS: Vi -gal. cans (6 in a case). Ind.&Bio.-Bio. Telvar Monuron Weed Killer: A wettable powder containing 80% 3-(p-chlorophenyl)-l,l-dimethyl- DUP210011307 WEED AND BRUSH KILLERS (Cont.) urea (monuron). USE: As a nor-selective weed killer on sites where bare ground is desired such as utility, highway, pipeline and railroad right-of-ways, petro leum tank farms, lumberyards, industrial plant sites, irrigation and drainage ditches and around farm buildings. Also for selective control of weed seedlings in certain crops such as asparagus, sugar cane, pine apple and citrus; and as a spot treatment in cropland to control deep-rooted perennial weeds. CONTAINERS: 4-lb. bags (12 in a case), 50-lb. fiber drums and 50-lb. bags. Ind.&Bio.-Bio. Trysben 200 Weed Killer: An aqueous solution of the dimethylamine salt of trichlorobenzoic acid, con taining 2 pounds of acid equivalent per gallon. USE: Control of many species of broadleaf weeds (espe cially deep-rooted perennials such as bindweed) and certain species of woody vines and brush. CONTAINERS: 1 -gal. cans (4 in a case), 5- and 30-gal. drums. Ind.&Bio.-Bio. Zobar Weed Killer: An aqueous solution of the dimethylamine salts of polychlorobenzoic acid, con taining 4 pounds of acid equivalent per gallon. USE: Control of many species of broadleaf weeds (espe cially deep-rooted perennials such as bindweed) and certain species of woody vines and brush. CONTAINERS: 1-gal. cans (4 in a case), 5- and 30-gal. drums. Ind.&Bio.-Bio. WERNER TYPE CHROMIUM COMPLEXES: See Chrome Complexes, page 41; Quilon Chrome Com p/ex, page 732; Yolan Bonding Agent, page 161. WETTING AGENTS: See Alkanol, page 6; Duponol, page 52; Merpent/ne, page 101; Pefrawef, page 115; Zonyl, page 7 65. WETTING AGENTS FOR NATURAL AND SYNTHETIC RUBBER: Aquarex D Wetting Agent: Sodium salts of sulfate monoesters of a mixture of higher fatty alcohols con sisting chiefly of the lauryl and myristyl derivatives of the type RS04Na. White Powder; Sp. Gr. 1.32. USE: To improve the stability of latex mixtures and to pre vent coagulation due to mechanical friction; in water solution as a mold lubricant. CONTAINERS: 100-lb. drums. Elastomers Aquarex G Wetting Agent: Water solution of sodium alkyl sulfonate of the type RS03Na. Clear amber liquid; Sp. Gr. 1.07. USE: In emulsion poly merization of synthetic elastomers and resins. CON TAINERS: 425-lb. drums. Elastomers Aquarex L Wetting Agent: Ammonium salts of alkyl acid phosphates of the type RHPO3ONH4. Amber WEED-WINGMASTER viscous paste; Sp. Gr. 1.05. USE: As a corrosion inhibiting mold lubricant. CONTAINERS: 400-lb. drums. Elastomers Aquarex MDL Wetting Agent: Water paste of sodium salts of sulfate monoesters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See Aquarex D, above). Amber paste; Sp. Gr. 1.08. USE: A stabilizing and wetting agent for latex mixtures; in water solution as a mold lubricant. CONTAINERS: 375-lb. diui'ns. Elastomers Aquarex ME Wetting Agent: Sodium salts of sul fate monoesters of a mixture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See Aquarex D, above). Creamy-white powder; Sp. Gr. 1.19. USE: A stabilizing and wetting agent for latex mixtures; in water solution, as mold lubricant. CONTAINERS: 150-lb. drums. Elastomers Aquarex NS Wetting Agent: Water solution of c- cetyl - betaine -- (CH3)3N + CH(C16H33)COO --. Brown, slightly cloudy liquid; Sp. Gr. 1.07. USE: As a stabilizer for latex mixtures. Due to its amphoteric properties it functions as a stabilizer in both acid and alkaline dispersions. CONTAINERS: 450-lb. drums. Elastomers Aquarex SMO Wetting Agent: 33% water solution of monosodium salt of sulfated methyl oleate-- CH3(CH2)8CH(S04Na) (CH2)7COOCH3. Reddish amber liquid; Sp. Gr. 1.08. USE: A surface condition ing agent for rubber latex and neoprene latex mix tures. CONTAINERS: 450-lb. drums. Elastomers Aquarex WAQ Wetting Agent: A water solution of the sodium salts of the sulfate monoesters of a mix ture of higher fatty alcohols consisting chiefly of the lauryl and myristyl derivatives (See Aquarex D). Amber viscous liquid; Sp. Gr. 1.05. USE: A stabilizing and wetting agent for latex mixtures; diluted, as a mold lubricant. CONTAINERS: 400-lb. drums. Elastomers WHITE PIGMENTS: See Titanium Dioxide Pigments, page 153. WHITE WALL TIRE CLEANER: See Automotive Special ties 7 Products, page 20. WINDOW SHADE MATERIAL: See Coated Fabrics, Tontine Washable Window Shade Materials, page 42. WINDSHIELD DE-ICER: See Automotive Specialties 7 Products, page 21. WINDSHIELD WASHER SOLVENT: See Automotive Specialties 7 Products, page 21. WINGMASTER SHOTGUN: See Arms, page 18. 163 DUP210011308 WIRE-ZEPEL WIRE ENAMELS: See Finishes, Industrial, Wire Enamels, page 76. WIRE, LEADING AND CONNECTING: See Explosives, Blasting Accessories and Supplies, page 60. WONDER SKEET OUTFIT: See Traps and Targets, page 158. 2.4- XYLIDINE-5-SULFONIC ACID TECHNICAL: Paste form; a Chemical Intermediate. Orchem D. & C. 2,4( AND 2,6) -XYUDINE TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. 2.5- XYLIDINE TECHNICAL: p-X/lidine; 2,5-Dimethyl- aniline. Liquid form; a Chemical Intermediate. Orchem D. & C. WOOD ALCOHOL: See Methanol, page 103. WOOD BLEACH: See Finishes, Industrial, Du-Life, page 74. XYLIDINES MIXED o-m-p TECHNICAL: Liquid form; a Chemical Intermediate. Orchem D. & C. Y WOOD FILLERS: See Finish es. Industrial, page 74; Finishes, Trade Sales (Consumer Products), page 83. WOOD PRESERVATIVES: See CZC Chromated Zinc Chloride, page 46; Copperized CZC Chromated Zinc Chloride, page 45; Zinc Chloride, page 165. WOOD PRIMERS, SEALERS, STAINS: See Finishes, Automotive, page 68; Finishes, Industrial, page 75; Finishes, Trade Sales (Consumer Products), page 79. YARN, CELLULOSE SPONGE: See Sponge, Cellulose, page 144. YARN, TEXTILE: See Fibers, Synthetic, page 65. 1 ZACLON FLUX (GALVANIZING): See Fluxes, Gal vanizing, Zaclon, page 84. ZALBA RUBBER ANTIOXIDANT: See Antioxidants for Natural and Synthetic Rubber, page 16. X X-12 FLAME RETARDANT: White crystalline material, completely soluble in hot water. Especially formulated to provide temperature stability and improve aging char acteristics. Exerts a stabilizing effect upon many dyes, improving light fastness and crocking characteristics. Resistant to removal by drycleaning solvents. USE: one- step, renewable-type flame retardant treatment for use on cellulosic materials, including cotton, viscose rayon and paper; not suitable for use on acetate rayon or synthetic fibers, except where blended with substantial percentages of cellulosic varieties. CONTAINERS: 40-lb. fiber drums and 100-lb. paper bags. Ind.&Bio.-Ind. ZELAN DURABLE WATER REPELLENTS: High qual ity, durable repellents backed by independent laboratory tests. Fabrics properly finished with Zelan and gar ments made from such fabrics may carry Zelan tags. Orchem D. & C. ZELCON SL FABRIC CONDITIONER: A quaternized long chain complex amine condensation product. A fabric softener and conditioner for compounding into home laundry softeners. Orchem D. & C. ZELEC ANTISTATIC AGENTS: Both durable and non durable types are available. Orchem D. & C. Du r a b l e No n d u r a b l e X-RAY FILM: See Radiographic Products, page 132. Zelec DP Zelec NE X-RAY FILM PROCESSING CHEMICALS: See Radio Zelec DX Zelec NK graphic Products, page 134. ZELEC UN LUBRICANT: A mixture of alkyl phos J; i X-RAY SCREENS: See Radiographic Products, page 133. phates. An effective mold release agent for a wide variety of plastic materials. Orchem D. & C. XYLENETHIOLS: See Chemical Peptizers for Natural and Synthetic Rubber, RPA 3 Cone, page 39. ZENITE RUBBER ACCELERATOR: See Accelerators for Natural and Synthetic Rubber, page 2. m-XYLlDINE: Sold as 2,4-Xylidine Technical, a Chemical Intermediate. Orchem D. & C. p-XYLIDINE: Sold as 2,5-Xylidine Technical, a Chemical Intermediate. Orchem D. & C. 2,4-XYLIDINE P TECHNICAL: m-Xylidine; 2,4-Di- methylaniline. Liquid form; a Chemical Intermediate. Orchem D. & C. ZEPAR BP REDUCING AGENT: Based on sodium hydrosulfite. A bleaching agent for groundwood pulp, unbleached pulp and old papers. Orchem D. & C. ZEPEL DURABLE OIL AND WATER REPELLENT: A fluorocarbon textile finish, nationally advertised and backed by independent laboratory tests. Fabrics prop erly finished with Zepel and garments made from such fabrics may carry Zepel tags. Orchem D. & C. DUP210011309 ZEREX-ZYTEL ZEREX ANTIRUST ANTIFREEZE: See Antifreeze Products, page 15. ZERLATE ZIRAM FUNGICIDE: See Fungicides, page 89. ZERONE ANTIRUST ANTIFREEZE: See Antifreeze Products, page 15. ZESET FABRIC STABILIZER: Fiber reactant type resin for crease resistance and dimensional stabilization of textiles. May be used in conjunction with Zelan durable water repellent or Zepel durable oil and water repel lent. Orchem D. & C. ZINC AMMONIUM CHLORIDE: See Fluxes, Galvaniz ing, Zaclon, page 84. ZINC CHLORIDE-FUSED AND GRANULAR TECH NICAL (BUTTER OF ZINC)-- ZnCI2: White trans lucent, hygroscopic solid or white, granular powder,- soluble in water and alcohol; M. P. 262C.,- B. P. 732C. Solution: ZnCl2 of various concentrations in water solu tion; clear, colorless solutions; miscible with water in all proportions, becoming slightly turbid at high dilutions. USE: As an ingredient in dry cell batteries, oil well com pletion fluids, tinning, galvanizing and soldering fluxes; for preservation and flameproofing of wood; in man ufacture of vulcanized hard fiber, intermediates, dyes, in reclaiming synthetic rubber. CONTAINERS: Granular-625- Ib. drums. Solution--55-gal. drums, tank cars and tank trucks. Fused--1,100-lb. drums. Ind.&Bio.-Ind. ZINC CHROMATE PRIMER: See Finishes, Refinish, page 82. ZINC CYANIDE: See Electroplating Products, page 57. ZINC DIMETHYLDITHIOCARBAMATE (ZIRAM): See Fungicides, Zerlate Ziram Fungicides, page 89. ZINC ETHYLENEBISDITHIOCARBAMA TE (ZINEB): See Fungicides, Parzate C Zineb Fungicide, page 89. ZINC PEROXIDE-Zn02: Fine, grit-free, white powder composed of zinc peroxide and zinc oxide; Zn02 content min. 55.0%; active oxygen content min. 9.0% by weight. Technical grade. Insoluble in water; dissolves readily in acid media to form hydrogen peroxide solution. USE: For manufacture of deodorants, dusting powders, oint ments, bleaching creams and foot powders; as catalyst and accelerator in rubber compounding; as a curing agent in elastomers such as polysulfide caulking and sealing compounds. CONTAINERS: 100-lb. drums. Electrochem. ZINC PLATING PRODUCTS: See Electroplating Prod ucts, Durobrite, Zin-O-Lyte, pages 56 and 57. ZINC SALT OF 2-MERCAPTOBENZOTHIAZOLE: See Accelerators for Natural and Synthetic Rubber, Zenite, page 2. ZINC SALT OF PENTACHLOROTHIOPHENOL: See Chemical Peptizers for Natural and Synthetic Rubber, Endor, page 39. ZINC SILICATE PHOSPHORS: See Luminescent Chem ical Products, page 101. ZINC YELLOW PIGMENTS: See Pigment Colors, page 124. ZINEB: See Fungicides, Parzate,page 89. ZIN-O-LYTE ADDITION AGENTS, BRIGHTENERS, SALTS: See Electroplating Products, page 57. ZIRAM: See Fungicides, Zerlate, page 89. ZOBAR WEED KILLER: See Weed and Brush Killers, page 163. ZONYL A SURFACE ACTIVE AGENT: A modified polyethylene glycol type nonionic of unusual effectiveness for reducing surface and interfacial tension in variety of aqueous solutions, emulsions and dispersions. Orchem D. & C. ZONYL FLUOROALKYL ESTERS: See Petroleum Chem icals, Stable Fluids, page 115. ZONYL S-13 FLUOROCHEMICAL SURFACTANT: Free acid of fluoroalkyl phosphate. Chemically stable surfactant effective as wetting and leveling agent in aqueous and nonaqueous media. Orchem D. & C. ZORON WSP RESIN FINISH: Used to insolubilize starch, Elvanol polyvinyl alcohol and other pigments. Used by the paper industry to impart a water resistant finish at the size press. Orchem D. & C. ZYTEL NYLON RESIN: See Plastics, Zyfel, page 128; Resins (Not Molding), Zyfel, page 137. 165 DUP210011310 TRADEMARK SECTION DU PONT'S trademarks are valuable assets, and should be treated and protected as such. The function of these trademarks is to identify the Du Pont Company as the source of the products to which they are applied, and to distinguish such products from those of other manufacturers. To accomplish this a trade mark must remain an indication of source and not be come the descriptive or generic term for a product, or class of products. When trademark significance is lost, exclusive right to the term is lost, too, and others may use it for similar products. Numerous once valuable trade marks, through misuse, have become descriptive words of the language. The name DU PONT and the well-known Du Pont oval are trademarks applied to all of the Company's products. There are numerous other trademarks which are applied to a single product, or to a line of products. Trademarks piay an important role in the marketing of products. They must be protected at all times. The following procedures should be observed by Du Pont personnel and by others who have occasion to use ar refer to Du Pont trademarks. Special procedures may be advisable for trademarks used on products covered by patents or those widely advertised to the public. 1. Make the Trademark Distinctive Always capitalize the first letter of the trademark and make it otherwise distinctive by use of quotation marks, capitalization, italics, or special printing. Such treat ment will indicate that our trademarks are not common everyday words of the language. 2. Indicate Registration Most Du Pont trademarks are registered in the United States Patent Office. When a registered trademark ap pears on the goods, containers, displays, tags, labels or in advertisements, the legend "Reg. U. S. Pat. Off." should also appear either beneath the mark or in a foot note keyed to the mark. In radio and television com mercials and occasionally in product advertising and promotional material a more informative legend proves useful, e.g., "Dacron" is Du Pont's registered trademark for its polyester fiber. Where space considerations make abbreviation desirable, the letter R in a circle, viz.:, may be used. If the trademark has not been registered, then it is important that there be no reference to reg istration. A legend comprising the word "Trademark" may be used in those rare cases where it becomes necessary to disclose the status of an unregistered mark. 3. make Du Pont Ownership Clear When other companies use one of our trademarks, it may be clear that the word is a trademark, but it may not be clear who owns it. In such cases, the mark should be identified as the property of the Du Pont Company. Where the trademark applies only to a Du Pont raw material or ingredient, it should not be used to create the impression that it is the trademark for the finished goods. 4. Use the Generic Term with the Trademark To minimize the possibility of a trademark becoming the descriptive or generic term for the product, it is necessary that the public and the trade know what the generic or descriptive term is. Accordingly, the generic or descriptive term should be used at least once in all advertisements, promotional material, displays, labels, and published reports. It should also be used in cor respondence, unless one is certain that the recipients-- such as limited classes of industrial users--recognize the term so well as a trademark that the generic or descrip tive term is implied. Although there is no legal requirement that the generic or descriptive term immediately fallow the trademark, it is suggested that in advertising and other promotional material, it immediately follow the trademark, and preferably in the first paragraph of the body copy. 5. Encourage Proper Use by Others It is important that our trademarks be used properly, not only by Du Pont personnel, but also by others who use the marks, such as customers, finished goods manu facturers, and the public. Proper use of Du Pont trade marks by others should be encouraged. Improper uses should be discouraged and, if not discontinued, re ported to the Legal Department. It is highly improper-- for example--to use a Du Pont trademark or a similar word as a trademark for goods not manufactured by Du Pont, or to use a Du Pont trademark or a prominent part of it to coin a new trademark, or to use a Du Pont trademark without making it distinctive. 167 DUP210011311 TRADEMARKS Key to Abbreviations D&C........................Dyes and Chemicals Division, Organic Chemicals Department ELASTOMERS...........................................................Elastomer Chemicals Department ELCM....................................................................................... Electrochemicals Department EXPLO................................................................................................Explosives Department F&F............................................................................... Fabrics and Finishes Department FIBR..............................................................................................Textile Fibers Department FILM.......................................................................................................................................FilmDepartment FRE................................... Freon Products Division, Organic Chemicals Department I&B................................................................... Industrial and Biochemicals Department PET.......................... Petroleum Chemicals Division, Organic Chemicals Department PHOT........................................................................................ Photo Products Department PIGM..............................................................................................................................PigmentsDepartment PLAS................................................................................................................................ PlasticsDepartment REM............................. ,................................................. Remington Arms Company, Inc. DUP210011312 t r a d e ma r k s The following list includes the majority of the product trademarks owned by E. 1. du Pont de Nemours and Company or its domestic subsidiaries. In each instance the trademark (in quotes) is followed by the generic name of the product to which the mark is applied. `denotes unregistered trademark; all others registered. Division or Department "7" cleaner.......................................................... F&F "7" polish..............................................................F&F u7" rubbing rnmoound.................................... F&F *"40" outside white............................................F&F *"552" rubber accelerator............................. Elastomers "808" rubber accelerator............................. Elastomers "833" rubber accelerator............................. Elastomers A "Acele" acetate fiber........................................Fibr "Acetamine" developer.................................... D&C "Acetamine" dyes............................................... D&C "Acudet" delay caps........................................Explo "Adiprene" urethane rubber............................ Elastomers *"Adlux" photographic film.............................Phot "Afflair" flake pigments.................................Pigm "Akroflex" rubber antioxidants.....................Elastomers "Alathon" polyethylene resins......................Plas "Albone" hydrogen peroxide......................Elcm "Aldyl" polymeric pipe.................................... Plas "Alkanol" surface active agents..................D&C "Alkanol" textile processing agents .... D&C "Animate" weed and brush killers...............F&F and l&B "Antox" rubber antioxidant......................... Elastomers "Antoxide" metal primer.................................F&F "Antron" nylon yarns and staple...............Fibr "Aquarex" surface active agents.....................Elastomers "Arasan" seed disinfectants and protectants...................................................... I&B "Arasan" thiram seed protectants.............. I&B "Arasan" 42-S thiram fungicide and repellent.......................................................... I&B "Aridex" water repllents.................................D&C "Arlton" combs...................................................Plas "Arlton" toothbrushes.................................... Plas "Armalon" TFE-fluorocarbon fiber felt. . . F&F "Armalon" TFE-fluorocarbon resin coated glass fabrics, tapes and laminates . . . F&F "Artie" methyl chloride.................................... Elcm *"Auric" ferric oxide........................................... Pigm *"Auto Angling" trap........................................Rem `"Automaster" shotgun.................................... Rem "Avitex" antistatic developer......................... D&C "Avitex" softeners............................................... D&C "Avitex" surface active agents......................D&C "Avitone" softeners............................................D&C B "Barak" rubber accelerator......................... Elastomers "Baymal" colloidal alumina......................... I&B `"Black Jack" enamel........................................ F&F "Blue Rock" skeet outfit.................................... Rem "Blue Rock" targets............................................ Rem Division or Department "Blue Rock" trap............................................... Rem "Budium" can coating.....................................F&F "Butacite" polyvinyl butyral..........................Plas c "Cadaiyte" bright dip....................................... Elcm "Cadalyte" brightener....................................... Elcm "Cadaiyte" maintenance compound . . . . Elcm "Cadalyte" plating salts.................................... Elcm "Cantrece" nylon.................................................. Fibr "Capracyl" dyes.................................................. D&C `"Captive Stud" kit............................................Rem "Cavalite" dyes................................................... D&C "Celanthrene" dyes............................................ D&C "Ceresan" seed disinfectants..........................I&B `"Chlorostain" dyes............................................D&C "Chromacyl" dyes............................................D&C "Cinquasia" dyes................................................D&C "Clysar" polyolefin film .................................Film `"CM" flame retardant.....................................I&B "Coppralyte" addition agent...................... Elcm "Coppralyte" plating salt............................. Elcm "Cordalon" detonating cord..........................Explo "Core-Lokt" bullets............................................ Rem "Corfam" poromeric shoe upper material . F&F "Corlar" epoxy finish........................................ F&F "Cronaflex" engineering reproduction film..................................................................... Phot "Croralith" photographic chemicals. . . . Phot "Cronapaque" polyester print film...............Phot "Cronapress" clarifying machine...............Phot "Cronapress" conversion film...................... Phot "Cronapress" processing chemicals .... Phot "Cronar" polyester photographic film . . . Phot "Cronar" polyester photographic film base................................................................. Phot "Cronex" x-ray film............................................Phot `"Cronex" x-ray chemicals............................. Phot "Cronex" intensifying screens...................... Phot "Cyanobrik" sodium cyanide..........................Elcm "Cyanogran" sodium cyanide...................... Elcm `"Dacolyte" addition agent.........................Elcm "Dacron" polyester fiber.............................Fibr "Dalamar" azo yellow............................... Pigm "Decalin" solvent...........................................D&C "Deenall" insecticide and fungicide.... F&F "Dckatyl" dyes.............................................. D&C "Delrin" acetal resins....................................Plas "Delrin" acetal resin pipe and fittings . . . Plas "Delsan" seed protectant............................. I&B 169 DUP210011313 TRADEMARKS Division or Department Division or Department *''Dentabest" toothbrushes............................. Plas *"Express" slugs................................................... Rem "Denla-Flex" toothbrushes............................. Plas "Extra" dynamite............................................... Explo *"Detaf)ex" flexible high explosives...............Explo "Detasheet" flexible explosives......................Explo "Dissolvo" tar and road oil remover. . . . F&F "Dorzan" poromeric material......................F&F F "Duclean" No. 1 inhibited sulfuric acid . . I&B "Fabrikoid" coated fabrics............................. F&F "Dudecm" No. 2 hvdrochloric acid solu u1eU_lUIIIII^ S__.U_U_I_C_U__.._.._._.._.._.._.......................................C..J.?. c tion inhibited...................................................I&B "Fabrilite" vinyl materials............................. F&F "Duco" cement...................................................F&F "Fairprene" cements....................................F&F "Duco" enamels...................................................F&F "Fairprene" coated fabrics......................... F&F "Duco" finishes...................................................F&F "Fairprene" sheet stocks....................................F&F "Duco" lacquers............................................... F&F "Fairprene" tapes.................................................. F&F "Duco" lacquer sealers.................................... F&F "Fermate" ferbam fungicides............................ F&F and I&B "Duco" mixing and tinting colors.................. F&F "Fieldmaster" rifle.............................................. Rem "Duco" polishing or rubbing compound . . F&F *"FIextye" wire reinforced plastic ribbon . . Explo "Duco" primers...................................................F&F "Flintflex" enamels.............................................. F&F "Duco" putties...................................................F&F "Flow Kote" paint........................................... F&F "Duco" sealer...................................................... F&F "Freon" fluorocarbons.................................Fre "Duco" solvents...................................................F&F "Freon 11" and "F-l 1" propellent, "Duco" thinners...................................................F&F refrigerant, solvent........................................Fre "Duco" undercoats........................................... F&F "Freon-11" B and "F-l 1" B blowing "Du-Lite" wood bleach.................................... F&F agent................................................................. Fre "Dulux" clears...................................................F&F "Freon-11" S and "F-l 1" S propellent. . . Fre "Dulux" enamels............................................... F&F "Freon-12" and "F-l 2" blowing agent, "Dulux" finishes...................................................F&F propellent, refrigerant............................. Fre is "Dulux" foam resin............................................F&F "Dulux" paints...................................................F&F "Freon-13" and "F-l 3" refrigerant .... Fre "Freon-13Bl" and "F-13B1" refrigerant. . Fre il: "Dulux" primers...................................................F&F "Freon-14" and "F-l4" propellent, "Dulux" putties...................................................F&F refrigerant...................................................... Fre "Dulux" reducers............................................... F&F "Freon-21" and "F-21" propellent, "Dulux" reinforcing oil.................................... F&F refrigerant, solvent........................................ Fre "Dulux" stencil paste........................................F&F "Freon-22" and "F-22" polymer inter "Dulux" thinners............................................... F&F mediate, propellent, refrigerant, "Dulux" undercoat........................................... F&F solvent.......................................................... Fre "Dulux"varnishes............................................... F&F "Freon-23" and "F-23" refrigerant .... Fre "Duobel" explosives........................................ Explo "Freon-113" and "F-1 13" blowing agent, "Duol" pigment...................................................Pigm polymer intermediate, propellent, "Duponol" sodium lauryl sulfate.................. D&C refrigerant................................................... Fre "Duponol" surface active agents.................. D&C "Freon-114" and "F-l 14" blowing agent, "Durobrite" addition agent..........................Elcm dielectric fluid, propellent, *"Dux" enamels...................................................F&F refrigerant...................................................Fre "Dybar" fenuron weed and brush "Freon-114B2" and "F-114B2" fire ex killer................................................................. I&B tinguishing agent, inert liquid, "Dycril" photopolymer printing plates . . . Phot refrigerant................................................... Fre "Dymetrol" continuous precision forms. . . Plas "Freon-115" and "F-l 15" dielectric gas, refrigerant...................................................Fre tj; "Freon-116" and "F-116" dielectric gas. . Fre I E "Freon" C-318 food propellent...............Fre "Freon-C318" dielectric gas, "Elcord" delay unit............................................Explo refrigerant...................................................Fre "Elvacet" polyvinyl acetate............................. Elcm "Freon-502" and "F-502" refrigerant . . . Fre "Elvanol" polyvinyl alcohol............................. Elcm "Freon" BF solvent.............................................. Fre "Elvax" vinyl resins............................................Elcm "Freon" MF solvent.............................................. Fre *"Endor" rubber peptizing agent.................. Elastomers "Freon" TF solvent.............................................. Fre "Eureka" soldering fluxes............................. I&B "Freon" solvent formula TA.............................. Fre *"Expert" trap...................................................... Rem "Freon" TC solvent.............................................. Fre *"Express" buckshot loads.................................Rem "Freon" TE-35 solvent........................................... Fre *"Express" rifle cartridges.................................Rem "Freon" T-WD602 solvent................................ Fre *"Express" shotgun shells.................................Rem "Freon" solvent formulaTMC.......................... Fre 170 DUP210011314 TRADEMARKS "Freon" FE 1301 fire extinguishing agent.......................................................... "Freon" precision cleaning agent . . . Division or Department Fre Fre G *"G-942" tanning agent.................................... I&B "Gamemaster" rifle........................................... Rem "G.B.S." globular sodium bisulfate .... I&B "Gelex" dynamite............................................... Explo *"Gelobel" explosives........................................Explo H "Halopont" pigment colors.............................D&C "Heliozone" inhibitor........................................Elastomers "Hierox" nylon filaments.................................Plas "Flexalin" cyclohexanol.................................... I&B "Hi-Cap" dynamite.............................................. Explo "High Speed" tinning flux.............................I&B *uHigh Velocity" buckshot loads.................. Rem *"High Velocity" cartridges............................. Rem *"High Velocity" shells........................................ Rem *"High Velocity" slugs........................................ Rem *"Highway Patrol" cartridges......................... Rem "Hi-Skor" smokeless powder............................ Explo *"Hi-Speed" cartridges.................................... Rem "Hitec" heat transfer salt................................... Explo *"Hi-Velocity" gelatin...........................................Explo "Hi-Way Master" cartridges......................... Rem "Hydan" feed supplement............................. I&B "Hydraphtal" textile processing agent. . . D&C "Hylene" organic isocyanates...................... Elastomers "Hypalon" synthetic rubber......................... Elastomers "Hytrol" cyclohexanone.................................I&B "Hyvar" isocil weed killer................................ I&B I "Imlar" chemical resistant finish.................. F&F "Impedex" sodium propionate...................... I&B "Imron" textile floor finish............................. F&F J *"Jet-Clene" upholstery cleaner...................... F&F K "K" cellophane...................................................Film "Karmex" diuron weed killer......................... I&B "Karmex" DL diuron herbicide...................... I&B "Kleanbore" priming........................................Rem "Kleanrol" soldering flux................................ I&B "Kloben" weed killer........................................I&B "Krenite" fertilizer solution.............................I&B "Krumble Ball" cartridges.............................Rem Division or Department L "Latyl" carrier...................................................... D&C "Latyl" dyes.......................................................... D&C "Lecton" acrylic resin coated fabrics and laminates............................................... F&F "Lecton" acrylic resin wire enamels .... F&F "Ledcore" delay assemblies..........................Explo "Leucosol" dyes...................................................D&C "Lido" combs...................................................... Plas *"Litho" photographic paper......................... Phot "Lithosol" acids and bases............................. D&C "Lithosol" dyes...................................................D&C "Lorol" fatty alcohols........................................I&B *"Lorox" weed killers........................................I&B "Lucite" acrylic house paint..........................F&F "Lucite" acrylic lacquers.................................F&F "Lucite" acrylic monomer.................................Plas "Lucite" acrylic resins........................................ Elcm & Plas "Lucite" acrylic resin dental materials . . . Plas "Lucite" acrylic sirup........................................Plas "Lucite" enamels............................................... F&F "Lucite" solvent...................................................F&F "Lucite" thinners............................................... F&F "Lucite" wall paint............................................F&F "Ludox" colloidal silica.................................... I&B "Lump Coal" explosives.................................Explo "Lusane" dyes...................................................... D&C "Luxol" dyes...................................................... D&C "Lycra" spandex fiber.................................... Fibr M "Manzate" maneb fungicide..........................F&F and I&B "Marlate" methoxychlor insecticides. . . . I&B "Matchmaster" rifle........................................... Rem "Merpentine" surface active agent...............D&C "Merpol" surface active agent...................... D&C "Mersect" aldrin seed insecticide.................. I&B *"Methacrol" lubricants.................................... D&C *"Methacrol" resin dispersions......................D&C *''Mighty-Mite" stud driver............................. Rem "Milban" thiodipropionate anti oxidant ..............................................................I&B *"Moca" curing agent........................................ Elastomers "Monastral" pigments.................................... Pigm "Monobel" explosives.................................... Explo "Mylar" polyester film.................................... Film N "Nalan" water repellent................................. D&C "Naphthanil" azoic compounds.................. D&C "Naphthanil" colors.................................... . D&C "Naphthanil" dye bases.................................D&C "Naphthanil" pigments.................................... Pigm "Neomerpin" surface active agent...............D&C "Neozone" rubber antioxidant...................... Elastomers *"NFL" wood stains............................................F&F "Nilite" nitro carbonitrate............................. Explo 171 DUP210011315 TRADEMARKS Division or Department "Niox" ammonium nitrate.............................Expio "Nitramex" blasting agent............................. Expio "Nitramite" nitro carbo nitrate......................Expio "Nitramon" blasting agent.............................Expio "Nitrosan" blowing agent.............................Expio "Nogas" metal pickling agent......................I&B "Nomex" nylon yarns........................................ Fibr "Nordel" hydrocarbon rubber......................Elastomers "NuGreen" urea fertilizers............................. I&B o "Ocenol" oleyl alcohol....................................... D&C *''Oil-Tite" cartridges........................................... Rem "Ondal" oxidizing agent................................... D&C "Orel" rubber lubricant................................ F&F "Orion" acrylic fiber........................................Fibr "Ortholeum" grease stabilizer......................Pet "Ortholeum" lubricant assistant.................. Pet "Oust" crabgrass killer.....................................F&F "Ovalite" enamel undercoat......................... F&F "Oxone" monopersulfate compound. . . . Elem P "Paramount" toothbrushes................................Plas *"Park Avenue" tooth, nail, hand brushes.................................................................Plas "Parzate" zineb and nabam fungicide . . I&B "Patterson" x-ray screens................................... Phot "Pattina" olefinic coated fabrics.................. F&F "Perclene" perchlorethylene..........................Elan "Perdox" sodium borate perhydrate. . . . Elcm "Permalux" neoprene accelerator................. Elastomers "Perone" hydrogen peroxide............................ Elcm "Petrowet" surface active agent.....................D&C "Photo-Writ" photocopy paper.................. Phot "Plastacele" cellulose acetate flake .... Plas "Polyac" butyl rubber conditioner................. Elastomers "Ponolith" pigments...........................................D&C "Ponsol" dyes......................................................... D&C "Pontachrome" dyes...........................................D&C "Pontacyl" dyes................................................... D&C "Pontamine" developers................................... D&C "Pontamine" dyes..................................................D&C *"Power Guide" stud retainer............................ Rem *"Power-Mate" kit............................................... Rem "Power-Matic" gas operated rifles and shotguns.....................................................Rem "Preparakote" primer-surfacer......................F&F "Prep-Sol" solvent.............................................. F&F "Pro-Tek" protective hand cream................ F&F "PX" book cloth.....................................................F&F "Pyralux" fluorescent enamels....................... F&F "Pyre-M.L." polyimide coated fabrics . . . F&F "Pyre-M.L." wire enamels.................................. F&F *"Pyrocore" igniter cord.................................... Expio Division or Department Q "Qualex" refined sodium CMC......................Expio "Quilon" chrome complexes..........................I&B R *"Ramapo" pigments........................................ Pigm "Rangemaster" rifle............................................Rem "Red Cross" dynamites.....................................Expio "Removo" paint remover.................................F&F "Roracyl" dyes...................................................D&C "Rotaiin" dyes...................................................D&C *"Rubbertone" rubber finish............................. F&F "Rug Anchor" rug underlay..........................F&F "Rulan" flame retardant plastic.................. Plas s "Savalux" dyes...................................................D&C "Seismex" dynamites........................................Expio *"Seismogel" gelatin............................................Expio "Semesan" turf fungicide.................................I&B "Semesan" seed disinfectant..........................I&B "Semesan Bel" seed disinfectant.................. I&B "7" polishes, waxes, cleaners......................... F&F "Sevron" dyes...................................................... D&C *"Shie(d" carwax............................................... F&F "Shirlan" fungicide........................................... D&C "Shur Shot" scatter loads.................................Rem "Shur Shot" shotgun shells............................. Rem "Sitol" oxidizing agent.................................... D&C "Skamex" metallurgical additive...................I&B "Slipspray" dry lubricant.................................F&F "Smite" insecticide........................................... F&F "Solozone" sodium peroxide......................... Elcm *"Spatter-Less" cartridges.................................Rem "Speedeasy" cellulose sponge cloth .... F&F "Speedmaster" rifles........................................Rem "Spintop" compressed gas cylinders .... Fre "Sportsman" shotgun........................................Rem *"SSS" seismograph blasting caps...............Expio "Stren" monofilament fishing line...............Plas "Stripkolex" dynamite....................................... Expio "Sulfanthrene" dyes........................................D&C "Sulfogene" dyes............................................... D&C "Sulforon" wettable sulfur............................. F&F "Superior" photographic film......................Phot "Surlyn" ionomeric resin.................................. Plas "Symmetrel" antiviral agent......................... I&B /.. . T "Tacot" high temperature explosives. . . . Expio "Target" cartridges........................................... Rem "Targetmaster" cartridges............................. Rem "Taslan" textured yarn and thread .... Fibr "Tedlar" PVF film............................................... Film "Teflon" FEP-fluorocarbon film......................Film "Teflon" FEP-fluorocarbon resin.................. Plas 172 r DUP210011316 TRADEMARKS Division or Department "Teflon" FEP/TFE-fluorocarbon fiber. . . . Fibr "Teflon" TFE-fiuorocorbon resin.................. Plas "Teflon" TFE-fluorocarbon resin finishes.............................................................. F&F "Teflon" TFE-fluorocarbon resin wire enamels..............................................................F&F "Telar" anti-freeze and summer coolant . . F&F "Telvar" monuron weed killer......................I&B J.WTl-epi*aIoneII ruO1.1u, ..i. u^w_e____iuCli__u___i_._._._.._._._.._._._.._._._.._._._.._._._.._._.._.______ A_______ ___ "Teracol" etherglycol........................................ Elastomers "Tersan" thiram fungicides............................. I&B "Tetralin" solvent............................................... D&C "Tetramix" antiknock compound.................. Pet "Tetrone" rubber accelerator...................... Elastomers "Thermoflex" rubber antioxidant...............Elastomers "Thianthrene" dyes............................................D&C "Thionex" rubber accelerator......................Elastomers "Thylate" thiram fungicide............................. I&B "Tipersul" fibrous potassium titanate . . . Pigm "Ti-Pure" titanium dioxide pigments .... Pigm "TLT-17" fluorocarbon telomers.................. D&C "Tontine" flame resistant vinyl drapery material.......................................................... F&F "Tontine" shade cloth........................................ F&F "Toval" gelatin...................................................Explo "Tovex" blasting agent.................................... Explo "Town and Country" enamel..........................F&F *"Trail Rider" rifle............................................... Rem *"Trey" fertilizer, herbicide, pesticide . . . F&F "Tridene" trichlorethylene............................. Elcm "Trysben" weed killer........................................ I&B *"Tufcote" finishes................................................F&F "Turtleback" car washing sponge...............F&F "Two Sixty Two" feed compound............... I&B "Tynex" nylon filaments.................................Plas "Tyzor" organic titanates............................. D&C u *"Unicel" blowing agents.................................Elastomers *"Unicel" blowing agents.................................Explo "Uramite" ureaform fertilizers...................... I&B "Uramon" ammonia liquors..........................I&B V "Valclene" drycleaning fluid..........................Elcm "Valron" ureaform solution..........................I&B "Vantalux" dyes............................................... D&C Division or Department "Varigram" photographic papers............. Phot "Varilour" photographic papers................ Phot "Vazo" vinyl polymerization catalyst . . . I&B "Velour Black" photographic papers . . . Phot "Vespel" diamond grinding wheels.... Plas "Vespel" plastic parts...................................... Plas "Vexar" plastic netting.................................... Film "Victor" shotgun shells.................................... Rem % is .iv--i "-o-p--ij-v,,a,,uUu-,i Bern..................................... "Viscolac" lacquers, enamels........................F&F "Viton" fluoroelastomer...............................Elastomers "Volan" bonding agent...............................I&B "Vydax" fluorocarbon telomers................ D&C w *"Watchung" pigments.................................... Pigm "Wingmaster" shotgun.................................... Rem "Wonder" skeet outfit...................................Rem "Woodmaster" rifle.......................................... Rem X *"Xtra-Fast" developer...................................Phot *"Xtra-Fast" x-ray film.......................................Phot "Zaclon" galvanizing flux............................. I&B "Zalba" rubber antioxidant......................... Elastomers "Zelan" water repellents................................ D&C "Zelcon" fabric conditioner............................ D&C "Zelec" antistatic agents................................ D&C -- "Zenite" rubber accelerator......................... ' Elastomers "Zepar" reducing agent................................ D&C "Zepel" fabric fluo rod izer............................. D&C "Zerex" antifreeze........................................... F&F "Zerlate" ziram fungicide............................. I&B "Zerone" antifreeze........................................... F&F "Zeset" fabric stabilizer................................ D&C "Zin-O-Lyte" addition agent . .........................Elcm "Zin-O-Lyte" brighteners.................................Elcm "Zin-O-Lyte" salts...............................................Elcm "Zobar" weed killers........................................I&B "Zonyl" fluorochemical surfactants .... D&C "Zoron" polymer emulsions.............................D&C "Zoron" resin finish........................................... D&C "Zytel" nylon resins........................................... Elcm & Plas 173 DUP210011317 IA C D Z INDUSTRIES SECTION This section provides a quick reference to many of the DuPont products available to various industries. Products are listed by name only, followed by the page number where the product description appears. Further information about special properties and applications may be obtained by a call or letter to the Depart ment which markets the product (shown in bold face type following product description) or to any of the Product Information Centers. Addresses of Department offices and Product Information Centers are listed the BLUE PAGES. The industry classifications used are adapted generally from the Standard Industrial Classification Manual of the United States Bureau of the Budget. AGRICULTURE (Page 176) APPAREL (Page 176) CHEMICALS AND ALLIED PRODUCTS: a. Plastic Materials (Page 176) b. Paints, Varnishes, Lacquers (Page 176) c. Pigments (Including Dyes) (Page 177) d. Drugs and Medicines (Page 177) e. Soaps, Detergents and Allied Products (Page 177) Perfumes, Cosmetics and other Toilet Preparations (Page 178) g. Commercial Explosives (Page 178) h. Chemical Manufacture (Page 178) Aerosols (Page 179) CONSTRUCTION AND MAINTENANCE (Page ELECTRICAL AND ELECTRONIC (Page 179) EXPORT (Page 180) FABRICATED METAL PRODUCTS (Page 180) FOOD AND KINDRED PRODUCTS (Page 180) FURNITURE AND FIXTURES (Page 181) LEATHER AND LEATHER PRODUCTS (Page 181) LUMBER AND WOOD PRODUCTS (Page 181) MINING (Page 181) PAPER AND ALLIED PRODUCTS (Page 181) PETROLEUM REFINING AND RELATED INDUSTRIES PHOTOGRAPHIC (Page 182) PRIMARY METALS (Page 182) PRINTING, PUBLISHING AND ALLIED PRODUCTS REFRIGERATION SERVICE (Page 183) RUBBER (Page 183) SPORTING AND MILITARY POWERS (Page 183) STONE, CLAY, GLASS AND DECORATED CERAMIC PRODUCTS TEXTILE AND TEXTILE MILL PRODUCTS (Page 184) TOBACCO (Page 184) TOILETWARE AND TOOTHBRUSHES (Page 184) TRANSPORTATION: a. Automotive (Page 185) b. Aerospace (Page 185) c. Railroad Equipment (Page 185) d. Ship and Boat Building (Page 185) MISCELLANEOUS: a. Medical Services (Page 186) b. Tapes--Pressure Sensitive, Magnetic, Recording (Page 186) DUP210011318 AGRICULTURE Acids, pages 3 to 5. Anhydrous Ammonia, page 64. Animal Repellants--Arasan 42-S, page 138. Chemical Intermediates, pages 29 to 38 Diethylamine, Technical, page 48. Dimethylamine (DMA), page 49. Dimethylamine-Anhydrous, Technical, page 49 Ar\o/- nr _ c _ l .j .: _ _______ cn /u j-zmicMiiyiuitimG ouiunun, puyc 60% Dimethylamine Solution, page 50 Diphenylamine, Refined, page 51 Emulsifying Agent A, page 57 Fertilizers, pages 64 to 65 Film, pages 65 to 68 Finishes, page 71 to 83 Formaldehyde Solution, page 85 Fungicides, pages 89 to 90 Furan, page 90 Hexamethylenimine, page 91 Hydrogen Cyanide, page 92 Insecticides, pages 94 to 95 Lawn and Garden Products, pages 96 to 98 40% Monoethylamine Solution, page 105 Monomethylamine, page 105 Nutrition and Therapy Products, page 108 Plastics, pages 125 to 128 Seed Treatments, pages 138 to 139 Spreader Sticker, page 145 Surfactant WK, page 146 Vexar Plastic Netting, page 161 VPM Soil Fumigant, page 161 Weed and Brush Killers, pages 162 to 163 DMAC-(Dimethylacetamide), page 51 Film-Tedlar PVF Film, page 67 Formaldehyde Solution, page 85 Freon-Other Products, page 88 Hexalin Cyclohexanol, page 91 Hexamethylenetetramine, page 91 Hydrogen Cyanide, page 92 Hylene Organic Isocyanates, page 93 Instruments, page 95 Lorol Fatty Alcohols, pages 99 to 100 Metacrylate Monomers, page 102 and 126 Methanol Formaldehyde 33-55, page 103 Nitrosan Blowing Agent, page 108 Ocenol Technical Oleyl Alcohol, page 109 Phenothlazine, page 115 Pigment Colors, page 124 Plastics, pages 125 to 128 Polymer Intermediates-Freon, page 86 Resins (Not Molding), pages 134 to 137 Sodium Styrene Sulfonate, page 143 Solvents-Freon, page 87 Tetrahydrofuran, page 151 Titanium Dioxide Pigments, page 153 Trichlorethylene, page 158 UnicelTMND Blowing Agent, page 160 UnicelTM NDX Blowing Agent, page 160 Urea, page 160 Urea Formaldehyde Solution, page 160 Vazo Vinyl Polymerization Catalyst, page 161 Volan Bonding Agent, page 161 Zelec UN Lubricant, page 164. Paints, Varnishes, Lacquers: I% APPAREL Acids, pages 3 to 5 Alkanol Surface Active Agents, pages 6 to 7 Corfam Poromeric Shoe Upper Material, page 45 Fibers, Synthetic, page 65 Aluminum Sulfate, page 7 Amine 248, page 7 Aniline, page 14 CHEMICALS AND ALLIED PRODUCTS n-Butanol Formadelhyde 51-40, page 24 Cellulose Acetate Flake, page 25 Chemical Intermediates, pages 29 to 38 Plastic Materials: Dimethyl Terephthalate, page 49 Acids, pages 3 to 5 Diphenylamine, page 51 Amine 248, page 7 DMAC (Dimethylacetamide), page 51 Blowing Agents-Freon, page 85 Calcium Peroxide, page 24 Caprolactam, page 25 DMF (Dimethyl Formamide), page 51 Duponol Surface Active Agents, pages 52 to 53 Dyes, pages 53 to 55 Ceramic Products, (Special pigments for plastics), page 27 Chemical Intermediates, pages 29 to 38 Cleaning Liquids--Freon Solvents, page 87 Diphenylamine (DPA) Refined, page 51 Formaldehyde Solution, page 85 Freon Products, pages 85 to 88 Hexalin Cyclohexanol, page 91 Hylene* Organic Isocyanates, page 93 Hytrol O Cyclohexanone, page 93 176 DUP210011319 PAINTS, VARNISHES, LACQUERS (Cont.) Instruments, page 95 Ludox Colloidal Silica, page 100 Methacrylate Monomers, page 102 Methanol Formaldehyde 33-55, page 103. Methylene Chloride, page 104 Nitrocellulose, Soluble Types, page 107 Perchlorethylene, page 110 Pigment Colors, page 124 Potassium Silicate-Solution Technical, page 130 Resins (Not Molding), pages 134 to 137 Sodium CMC, page 142 Sodium Nitrite, page 143 Sodium Silicate, page 143 Tetrahydrofuran, page 151 Tetralin Solvent, page 151 Titanium Dioxide Pigments, page 153 Triclene Phosphatizing Solutions, page 159 Trichlorethylene, page 158 Tyzor Organic Titanates, page 159 Urea, page 160 Pigments (Including Dyes): Acids, pages 3 to 5 Aluminum Chloride, page 7 Aluminum 5ulfate, page 7 Ammoniacal Liquor, page 11 Anhydrous Ammonia, Commercial Grade, page 13 Aniline, page 14 Baymal Colloidal Alumina, page 21 Chemical Intermediates, pages 29 to 38 Chloroform-Hydrocarbon Stabilized Grade, page 40 Dimethyl Sulfate, page 49 Diphenylamine (DPA) Refined, page 51 DMF (Dimethyl Formamide), page 51 Duponol Active Agents, pages 52 to 53 Dyes and Dye Bases, pages 53 to 55 Monomethylamine, page 105 OcenolOleyl Alcohol, page 109 Perdox Sodium Borate Perhydrate, page 111 Pigment Colors, page 124 Resins (Not Molding), pages 134 to 137 Sodium, page 141 Sodium Bisulfite, page 142 Sodium Cyanide, page 142 Sodium Nitrite, page 143 Sodium Perborate Tetrahydrate, page 143 Sodium Styrene Sulfonate, page 143 Sodium Thiosulfate, page 144 Strontium Nitrate, page 145 Titanium Dioxide Pigments, page 153 Urea, page 160 Zinc Chloride, page 165 Drugs and Medicines: Acids, pages 3 to 5 Aluminum Sulfate, Iron Free, page 7 Calcium Peroxide, page 24 Cellophane, page 25 Chemical intermediates, pages 29 to 38 Chloroform-Ethanol Stabilized Grade, page 40 Diethylamine-Technical, page 48 Dimethyl Sulfate, page 49 Diphenylamine (DPA) Refined, page 51 Duponol C, page 52 Film-Acetate and Mylar Polyester, pages 65 and 67 Freon Products, pages 85 to 88 Furan, page 90 Hexamethylenimine, page 91 Hydrogen Peroxide, page 92 Methyl Formate Technical, page 103 Monomethylamine-Anhydrous and Aqueous Solutions, page 105 Nitroglycerin-Beta Lactose Mixture, page 107 Perdox Sodium Borate Perhydrate, page 1 1 1 Plastics, pages 125 to 128 Sodium, page 141 Sodium CMC, page 142 Sodium Perborate Tetrahydrate, page 143 Tetrahydrofuran, page 151 Trimethylamine, page 159 Urea, page 160 Soaps, Detergents and Allied Products: Acids, pages 3 to 5 Alkanol Surface Active Agent, page 6 Aluminum Sulfate, Iron Free, page 7 Ammoniacal Liquor, page 11 Ammonium Sulfate, page 11 Anhydrous Ammonia, Commercial Grade, page 13 Chemical Intermediates, pages 29 to 38 Diethylaminoethanol, page 48 Diphenylamine (DPA) Refined, page 51 Duponol Surface Active Agents, pages 52 to 53 Dyes, pages 57 to 55 Hexalin Cydohexanol, page 91 Hydrogen Peroxide, page 92 Lorol Fatty Alcohols, pages 99 to 100 Ludox Colloidal Silica, page 100 Merpol 5urface Active Agent, page 101 Ocenol Technical Oleyl Alcohol, page 109 Oxone Monopersulfate Compound, page 110 Perchlorethylene, page 1 10 177 DUP210011320 SOAPS, DETERGENTS AND ALLIED PRODUCTS (Cont.) Resins (Not Molding), pages 134 to 137 Sodium, page 141 Sodium Bisulfate, page 142 Sodium CMC, page 142. Sodium Metasilicate, page 142 Sodium Perborate Tetrahydrate, page 143 Sodium Silicate Solution, page 143 Sulfur Trioxide, page 146 Trichlorethylene, page 158 Urea, page 160 Valclene Dry Cleaning Fluid, page 160 Zelcon Fabric Conditioner, page 164 Perfumes, Cosmetics and Other Toilet Preparations: Baymal Colloidal Alumina, page 21 Calcium Peroxide, page 24 Chemical Intermediates, pages 29 to 38 Duponol Surface Active Agents, pages 52 to 53 Dyes and Dye Bases, pages 53 to 55 Freon Products, pages 85 to 88 Hydrogen Peroxide, page 92 Lorol Fatty Alcohols, pages 99 to 100 Oxone Monopersulfate Compound, page 110 Perdox Sodium Borate Perhydrate, page 111 Pigment Colors, page 123 Plastics, pages 125 to 128 Resins (Not Molding), pages 134 to 137 Sodium CMC, page 142 Sodium Perborate Tetrahydrate, page 143 Tetrahydrofuran, page 151 Urea, page 160 Zinc Peroxide, page 165 Commercial Explosives: Acids, pages 3 to 5 Ammonium Nitrate, page 11 Anhydrous Ammonia, Commercial Grade, page 13 Chemical Intermediates, pages 29 to 38 Cyclotrimethylenetrinitramine, page 46 Diphenylamine (DPA) Refined, page 51 Dyes, pages 53 to 55 Explosives, pages 59 to 63 Flexible Linear Shaped Charge (FLSC), page 83 Hexamethylenetetramine, page 91 Instruments, page 95 Lead Azide, page 98 Mild Detonating Fuse (MDF), page 104 Military Specialties, page 104 Pentaerythrite Tetranitrate (PETN), page 110 PyrocoreTM Ignitor Cord, page 132 Smokeless Powders, page 140 Sodium CMC, page 142 Strontium Nitrate, page 145 Trichlorethylene, page 158 Trinitrotoluene (TNT), page 159 Chemical Manufacture: Acids, pages 3 to 5 Alkanol Surface Active Agents, page 6 Aluminum Chloride, page 7 Aluminum Complex 101 Technical, page 7 Amine 248, page 7 Ammoniacal Liquor, page 11 Ammonium Hydroxide, page 11 Ammonium Nitrate, page 11 Ammonium Sulfate, page 11 Anhydrous Ammonia, page 13 Aniline, page 14 Anisole, page 14 Baymal Colloidal Alumina, page 21 n-Butanol Formaldehyde, page 24 Calcium Peroxide, page 24 e-Caprolactam, page 25 Chemical Intermediates, pages 29 to 38 Chloroform, page 40 Clad Metal, page 41 Diethylamine Technical, page 48 Dimethylamine, page 49 Dimethyl Sulfate, page 49 Dimethyl Terephthalate (DMT), page 49 Diphenylamine (DPA) Refined, page 51 DMAC (Dimethylacetamide), page 51 DMF (Dimethyl Formamide), page 51 Duponol Surface Active Agents, pages 52 to 53 Dyes, pages 53 to 55 Dyes, Petroleum, page 113 Formaldehyde Solution, page 85 Formamide, page 85 Freon Products, pages 85 to 88 Furan, page 90 Hexalin Cyclohexanol, page 91 Hexamethylenetetramine, page 91 Hexamethylenimine, page 91 Hitec Heat Transfer Salt, page 91 Hydrogen Cyanide, page 92 Hydrogen Peroxide, page 92 Hylene* Organic Isocyanates, page 93 HytroT O Cyclohexanone, page 93 Instruments, page 95 Lead Azide, page 98 LorolFatty Alcohols, pages 99 to 100 178 DUP210011321 CHEMICAL MANUFACTURE (Cont.) Ludox Colloidal Silica, page 100 Methacrylate Monomers, page 102 Methanol, page 103 Methanol Formaldehyde, page 103 Methyl Chloride, page 103 Methyl Formate, page 103 40% Monoethylatnine Solution, page 105 it _ _____ ii__i__ :___ muriUtliCMi/iuiiinic;, i rw; iw Nitrobenzene, page 107 Nitrocellulose, page 107 OcenolOleyl Alcohol, page 109 Oxone Monopersulfate Compound, page 110 Perchiorethylene, page 110 Perdox Sodium Borate Perhydrate, page 111 Petrowet Surface Active Agent, page 1 15 Pigment Colors, page 124 Potassium Silicate, page 129 Product BCO, page 130 Product BDO, page 130 Quilon Chrome Complex, page 132 Resins (Not Molding), pages 134 to 137 Salt Cake, page 138 Shirlan Fungicide, page 140 Sodium, page 141 Sodium Bisulfate, page 142 Sodium Bisulfite, page 142 Sodium CMC, page 142 Sodium Cyanide, page 142 Sodium Metasilicate, page 142 Sodium Monoxide, page 142 Sodium Nitrite, page 143 Sodium Perborate Tetrahydrate, page 143 Sodium Peroxide, page 143 Sodium Silicate, page 143 Sodium Styrene Sulfonate, page 143 Sodium Sulfocyanide, page 143 Sodium Thiosulfate, page 144 Sulfur Trioxide, page 146 Tetrahydrofuran, page 151 Tetralin Solvent, page 151 Titanium Pigments, page 153 Trichlorethylene, page 158 Trimethylamine, page 159 Tyzor Organic Titanates, page 151 Urea, page 160 Urea Formaldehyde Solution, page 160 Vazo Vinyl Polymerization Catalyst, page 161 Volan Bonding Agent, page 161 Vydax Fluorocarbon Telomers, page 161 Zinc Chloride, page 165 Zonyl Fluorochemical Surfactants, page 165 Aerosols: Freon Products, pages 85 to 88 Methyl Chloride Technical Grade, page 103 Methylene Chloride, pages 88 and 104 Plastics, pages 125 to 128 CONSTRUCTION AND MAINTENANCE Acids, pages 3 to 5 Cements, page 26 Chain Saws and Accessories, page 28 Coated Fabrics, page 42 Explosives, pages 59 to 63 Fertilizers, page 64 Film Mylar polyester, page 66 Polyethylene, page 67 Tedlar PVF, page 67 Finishes Industrial, pages 73 to 76 Consumer (including Industrial Maintenance), pages 76 to 83 Flexible Linear Shaped Charge (FLSC), page 83 Fluxes, page 84 Freon Solvents, page 87 Fungicides, page 89 Lawn and Garden Products, pages 96 to 98 Mild Detonating Fuse (MDF), page 104 Military Specialties, page 104 Plastics, pages 125 to 128 Professional Floor Maintenance Products, page 130 Radiographic Products, pages 132 to 134 Resins (Not Molding), pages 134 to 137 Surplus Materials, page 146 Tools, Construction and Industrial, pages 154 to 156 Tools, Powder Activated, page 156 Vespel Diamond Grinding Wheels, page 128 Weed and Brush Killers, page 162 ELECTRICAL AND ELECTRONIC Amine 248, page 7 Ammonium Chloride, Technical, page 11 Baymal Colloidal Alumina, page 21 Cellulose Acetate Flake, page 25 Cements, page 26 Clad Metal, page 41 Cleaning Liquids: Freon Solvents, page 87 Trichlorethylene, page 158 Coated Fabrics, page 42 Dielectric Gas, page 87 (Freon) 179 - DUP210011322 ELECTRICAL AND ELECTRONIC (Cont.) Dyes, pages 53 to 55 Electronic Materials, page 55 Electroplating Products, page 55 to 57 Fibers, Synthetic, page 65 Films, pages 65 to 68 Finishes, industrial (Wire Enamels), page 76 Fluxes, page 84 --- -------HutrArton PorAvi^o a a a b 00 ---------------- / [------ *>- - - Instruments, page 95 - Luminescent Chemicals, page 101 Photographic Products, pages 116 to 124 Pigment Colors, page 124 Plastics, pages 125 to 128 Potassium Silicate Solution, page 129 Radiographic Products, pages 132 to 134 Resins (Not Molding), pages 134 to 137 Synthetic Rubber, pages 146 to 150 Tipersul Fibrous Potassium Titanate, page 153 Trichlorethylene, page 158 EXPORT CONTACT EXPORT DIVISION OF EACH DEPARTMENT (BLUE PAGES) FOR THEIR PRODUCTS AVAILABLE FOR EXPORT. FABRICATED METAL PRODUCTS Acids, pages 3 to 5 Adhesives, page 6 Ammonium Chloride, page 11 Baymal Colloidal Alumina, page 21 Cements, page 26 Ceramic Products, page 26 Chemical Intermediates, pages 29 to 38 Clad Metal, page 41 Coated Fabrics, page 42 Diamond Knives, page 47 Duponol Surface Active Agents, page 52 Electronic Materials, page 55 Electroplating Products, pages 55 to 57 Films, pages 65 to 68 Finishes: Automotive, pages 68 to 71 Industrial, pages 73 to 76 Flexible Linear Shaped Charge (FLSC), page 83 Fluxes, page 84 Freon Solvents, page 87 Hydrogen Peroxide, page 92 Metal Products, page 102 Methyl Chloride, page 103 Methylene Chloride, page 104 Nogas Metal Pickling Agent, page 108 Perchlorethylene, page 110 Petrowet Surface Active Agent, page 115 Photographic Products, pages 116 to 124 Plastics, pages 125 to 128 Potassium Cyanide, page 129 Potassium Silicate, page 129 Radiographic Products, pages 132 to 134 Resins (Not Molding), pages 134 to 137 Rivets, page 137 Skamex Metallurgical Additive, page 140 Sodium, page 141 Sodium Bisulfate, page 142 Sodium Cyanide, page 142 Sodium Metasilicate, page 142 Sodium Nitrite, page 143 Sodium Silicate Solution, page 143 Sodium Sulfocyanide, page 143 Tetralin Solvent, page 151 Tools, Construction and Industrial, pages 154 to 156 Tools, Powder Actuated, page 156 Trichlorethylene, page 158 Triclene Phosphatizing Solution, page 159 Tyzor Organic Titanates, page 159 Vexar Plastic Netting, page 161 Vydax Fluorocarbon Telomers, page 161 Zinc Chloride, page 165 FOOD AND KINDRED PRODUCTS Acids, pages 3 to 5 Aluminum Sulfate Iron Free, page 7 Cellophane, page 25 Chemical Intermediates, pages 29 to 38 Film: Cellophane, page 25 Clysar Polyolefin, page 66 Mylar Polyester, page 66 Polyethylene, page 67 Vexar Plastic Netting, page 161 Freon Food Propellant, page 87 Hydrogen Peroxide, page 92 Nutrition and Therapy Products, page 108 Plastics, pages 125 to 128 Salt Cake, page 138 Sodium CMC, page 142 Sponges, Cellulose, page 144 Tools, Powder Actuated, page 156 Vexar Plastic Netting, page 161 180 DUP210011323 FURNITURE AND FIXTURES Cements, page 26 Coated Fabrics, page 42 Finishes: Industrial, pages 73 to 76 Refinishing, pages 71 to 73 Consumer, pages 76 to 83 Hydrogen Peroxide, page 92 Plastics, pages 125 to 128 Resins (Not Molding), pages 134 to 137 Sponges, Cellulose, page 144 Surplus Materials, page 146 Tetrahydrofuran, page 151 Tools, Construction and Industrial, pages 154 to 156 Triclene Phosphatizing Solutions, page 159 Vexar Plastic Netting, page 161 LEATHER AND LEATHER PRODUCTS Acids, pages 3 to 5 Adhesives, page 6 Alkanol Surface Active Agents, page 6 Aluminum Sulfate Iron Free, page 7 Cements, page 26 Chemical Intermediates, page 29 to 38 Corfam Poromeric Material (Leather Substitute), page 45 Dimethylamine (DMA), page 49 Duponol Surface Active Agents, page 52 Dyes, pages 53 to 55 Formaldehyde Solution, page 85 G-9421M Tanning Agent, page 90 Hydrogen Peroxide, page 92 Hylene Organic Isocyanates, page 93 Merpentine Surface Active Agent, page 101 Methacrol Lubricant, page 102 Pigment Colors, page 124 Quilon Chrome Complexes, page 132 Resins (Not Molding), pages 134 to 137 Sodium Cyanide, page 142 Sodium Thiosulfate, page 144 Tetrahydrofuran, page 151 Titanium Dioxide Pigments, page 153 LUMBER AND WOOD PRODUCTS (EXCEPT FURNITURE) Ammonium Sulfate, page 11 Cements, page 26 Chain Saws and Accessories, page 28 Chemical Intermediates, pages 29 to 38 Copperized CZC, page 45 CZC, Chromated Zinc Chloride, page 46 Explosives, pages 59 to 63 Finishes, Industrial, pages 73 to 76 Hydrogen Peroxide, page 92 Hydrosulfite Concentrated, page 93 Instruments, page 95 Resins (Not Molding), pages 134 to 137 Tools, Construction and Industrial, page 154 to 156 Urea, page 160 Urea Formaldehyde, page 160 Volan Bonding Agent, page 161 Weed and Brush Killers, page 162 Zinc Chloride, page 165 MINING Explosives, pages 59 to 63 Flexible Linear Shaped Change (FLSC), page 83 Military Specialties, page 104 Sodium Cyanide, page 142 Weed and Brush Killers, page 162 PAPER AND ALLIED PRODUCTS Acids, pages 3 to 5 Adhesives, page 6 Alkanol Surface Active Agents, page 6 Aluminum Sulfate, page 7 Ammonium Sulfamate, page 11 Baymal Colloidal Alumina, page 21 n-Butanol Formaldehyde, page 24 Cellophane, page 25 Cements, page 26 Ceramic Products, page 26 Chemical Intermediates, pages 29 to 38 CMTM Flame Retardant, page 42 Duponol Surface Active Agents, pages 52 to 53 Dyes, pages 53 to 58 Films, pages 65 to 68 Finishes, Paper Lacquers, page 75 Formaldehyde Solution, page 85 Formamide Technical, page 85 Hexamethylenetetramine, page 91 Hydrogen Peroxide, page 92 Hydrosulfite Concentrated, page 93 Ludox Colloidal Silica, page 1Q0 Merpol Surface Active Agent, page 101 Methanol Formaldehyde, page 103 Nitrocellulose, page 107 Pigment Colors, page 124 Plastics, pages 125 to 128 181 DUP210011324 . PAPER AND ALLIED PRODUCTS (Cont.) Quilon Chrome Complexes, page 132 Resins (Not Molding), pages 134 to 137 Retarder LAN, page 137 Salt Cake, page 138 Sodium CMC, page 142 Sodium Peroxide, page 143 Sodium Silicate Solution, page 143 C-J:------- TL:----------- --------------------------------1 AA OUUIUII] IIIIU3UII U I V, I *T"T Tetrahydrofuran, page 151 Titanium Dioxide Pigments, page 153 Trichlorethylene, page 158 Urea, page 160 Urea Formaldehyde, page 160 Vexar Plastic Netting, page 161 Volan Bonding Agent, page 161 X-12 Flame Retardant, page 164 Zepar Reducing Agent, page 164 Zoron Resin Finish, page 165 PETROLEUM REFINING AND RELATED INDUSTRIES Acids, pages 3 to 5 Ammonium Chloride, page 11 Antiknock Compounds, page 111 Cements, page 26 Chemical Intermediates, pages 29 to 38 Coated Fabrics, page 42 Diphenylamine Refined, page 51 DMF (Dimethyl Formamide), page 51 Dyes, Petroleum, page 113 Explosives, pages 59 to 63 Finishes: Industrial, pages 73 to 76 Industrial Maintenance, pages 76 to 83 Fuel Oil Additives, pages 113 to 114 Gasoline Additives, pages 114 to 115 Hexalin Cyclohexanol, page 91 Hitec Heat Transfer Salt, page 91 Hytrol O Cyclohexanone, page 93 Instruments, page 95 Lorol Fatty Alcohols, page 99 Lube Oil Additives, page 114 Methanol, page 103 Petroleum Chemicals: Antifoam Agent, page 111 Antiknocks, page 111 Antioxidants, page 112 Corrosion Inhibitors, page 1 13 Dyes, page 113 Fuel Oil Additives, page 113 Grease and Lubricating Oil Additives, page 114 Metal Deactivators, page 1 14 Multifunctional Additive, page 114 Stable Fluids, page 115 Petrowet Surface Active Agent, page 115 Phenothiazine, page 1 15 Plastics, pages 125 to 128 Qualex Refined Sodium CMC, page 132 Sodium, page 141 Sodium CMC, page 142 Sodium Nitrite, page 143 Sodium Silicate Solution, page 143 Sulfur Trioxide, page 146 Synthetic Rubber, pages 146 to 150 Weed and Brush Killers, page 162 PHOTOGRAPHIC Aluminum Chloride, page 7 Ammoniacal Liquor, page 11 Cements, page 26 Chemical Intermediates, pages 29 to 38 Coated Fabrics, page 42 Diamond Knives, page 47 Dyes, pages 53 to 55 Freon Solvents, page 87 Instruments, page 95 Ludox Colloidal Silica, page 100 Monomethylamine, page 105 Photographic Products, pages 116 to 124 Pigment Colors, page 124 Plastics, pages 125 to 128 Radiographic Products, pages 132 to 134 Resins (Not Molding), pages 134 to 137 Sodium Sulfocyanide, page 143 Sodium Thiosulfate, page 144 Sponges, Cellulose, page 144 PRIMARY METALS Acids, pages 3 to 5 Alkanol Surface Active Agents, page 6 Ammonium Chloride, page 11 Ammonium Sulfate, page 11 Baymal Colloidal Alumina, page 21 Chemical Intermediates, pages 29 to 38 Clad Metals, page 41 Duponol Surface Active Agents, page 52 Electroplating Products, page 55 Fluxes, page 84 Freon Solvents, page 87 Hydrogen Peroxide, page 92 ' DUP210011325 PRIMARY METALS (Cont.) Instruments, page 95 Metal Products, page 102 Nogas Metal Pickling Agent, page 108 Radiographic Products, pages 132 to 134 Resins (Not Molding), pages 134 to 137 Skamex Metallurgical Additive, page 140 Sodium, page 141 Sodium Cyanide, page 142 Sodium Metasilicate, page 142 Sodium Nitrite, page 143 Sodium Silicate Solution, page 143 Sodium Sulfocyanide, page 143 Tools, Powder Actuated, page 156 Trichlorethylene, page 158 Triclene Phosphatizing Solution, page 159 Zinc Chloride, page 165 PRINTING, PUBLISHING AND ALLIED PRODUCTS Acids, pages 3 to 5 Adhesives, page 6 Chemical Intermediates, pages 29 to 38 Coated Fabrics, page 42 Dycril Photopolymer Printing Plates, page 123 Dyes, pages 53 to 55 Films, pages 65 to 68 Finishes, Industrial, pages 73 to 76 Freon Solvents, page 87 Photographic Products, pages 116 to 124 Pigment Colors, page 124 Resins (Not Molding), pages 134 to 137 Tetrahydrafuran, page 151 Titanium Dioxide Pigments, page 153 Trichlorethylene, page 158 REFRIGERATION SERVICE Acids, pages 3 to 5 Finishes: Industrial, pages 73 to 76 Refinishing Materials, pages 71 to 73 Fluxes, page 84 Freon Products, pages 85 to 88 Hitec Heat Transfer Salt, page 91 Methyl Chloride, page 103 Methylene Chloride, page 104 Plastics, pages 125 to 128 Sodium Nitrite, page 143 Synthetic Rubber, pages 146 to 150 Trichlorethylene, page 158 RUBBER Accelerators for Natural and Synthetic Rubber, pages 1 to 2 Acids, pages 3 to 5 Antioxidants for Natural and Synthetic Rubber, page 15 Blowing Agents: Freon Products, pages 85 to 87 Hylene Organic Isocyanates, page 93 Nitrosan Biowing Agents, page 108 UnicelTM Blowing Agents, pages 23 and 160 Chemical Intermediates, pages 29 to 38 Chemical Peptizers for Natural and Synthetic Rubber, page 39 Diethylamine Technical, page 48 Fibers, Synthetic, page 65 Hexamethylenetetramine, page 91 Hexamethylenimine, page 91 Hydrogen Peroxide, page 92 Hylene Organic Isocyanates, page 93 Ludox Colloidal Silica, page 100 Miscellaneous Chemicals for Natural and Synthetic Rubber, page 104 Nitrobenzene, page 107 Nitrosan Blowing Agent, page 108 Perchlorethylene, page 110 Pigment Colors, page 124 Protective Agents for Natural and Synthetic Rubber, page 131 Resins (Not Molding), pages 134 to 137 Retarder W, page 137 Sodium Nitrite, page 143 Synthetic Rubber, pages 146 to 150 Tetrahydrofuran, page 151 Titanium Dioxide Pigments, page 153 Trichlorethylene, page 158 UnicelTM Blowing Agents, page 160 Urea, page 160 Wetting Agents for Natural and Synthetic Rubber, page 163 Zinc Chloride, page 165 SPORTING AND MILITARY POWDERS Acids, pages 3 to 5 Ammunition, pages 11 to 13 Black Sporting Powder, page 23 Cyclotrimethylenetetramine, page 46 Military Specialties, page 104 Pentaerythrite Tetranitrate (PETN), page 110 PyrocoreTM Igniter Cord, page 132 Smokeless Powders, pages 140 to 141 TNT (Trinitrotoluene), page 159 183 DUP210011326 STONE, CLAY, GLASS AND DECORATED CERAMIC PRODUCTS Acids, pages 3 to 5 Baymal Colloidal Alumina, page 21 Ceramic Products, page 26 Chemical Intermediates, pages 29 to 38 Electronic Materials, page 55 Salt Cake, page 138 Sodium Metasilicate, page 142 Sodium Silicate, page 143 Ludox Colloidal Silica, page 100 Merpentine Surface Active Agent, page 101 Merpol Surface Active Agent, page 101 MethacrolTM Resin Dispersions, page 102 Methanol Formaldehyde, page 103 Nalan Water Repellents, page 105 Nitrocellulose, page 107 Ocenol Technical Oleyl Alcohol, page 109 Ondal Oxidizing Agent, page 109 Oxone Monopersulfate Compound, page 110 Perchlorethylene, page 110 Perdene Plus, page 111 TEXTILE AND TEXTILE MILL PRODUCTS Acids, pages 3 to 5 Alkanol Surface Active Agents, page 6 Aluminum Complex 101, page 7 Ammonium Sulfamate, page 11 Ammonium Sulfate, page 11 Antifume S Solution, page 15 Aridex Water Repellent, page 16 Avitex Softeners, page 21 Avitone Softeners, page 21 Baymal Colloidal Alumina, page 21 n-Butanol Formaldehyde, page 24 Caprolactam, page 25 Cellophane, page 25 Cellulose Acetate Flake, page 25 Ceramic Products, page 26 Chemical Intermediates, pages 29 to 38 CMTM Flame Retardant, page 42 Coated Fabrics, page 42 Decalin Solvent, page 46 Diethylamine, page 48 Diethylaminoethanol, page 48 Duponol Surface Active Agents, pages 52 to 53 Dyes and Dye Bases, pages 53 to 55 Fibers, Synthetic: Acele Acetate Fiber, page 65 Antron Nylon, page 65 Dacron Polyester Fiber, page 65 Perdox Sodium Borate Perhydrate, page 111 Product BCO, page 130 Product BDO, page 130 Quilon Chrome Complexes, page 132 Resins (Not Molding), pages 134 to 137 Retarder LAN, page 137 Sitol Flakes, page 140 Sodium CMC, page 142 Sodium Meta silicate, page 142 Sodium Perborate Tetrahydrate, page 143 Sodium Peroxide, page 143 Sodium Silicate Solution, page 143 Sodium Styrene Sulfonate, page 143 Sodium Sulfocyanide, page 143 Sodium Thiosulfate, page 144 Sponge Yarn, Cellulose, page 144 Urea, page 160 Urea Formaldehyde, page 160 Valclene Drycleaning Fluid, page 160 X-12 Flame Retardant, page 164 Zelan Water Repellent, page 164 Zelcon Fabric Conditioner, page 164 Zelec Antistatic Agent; Lubricant, page 164 Zepar Reducing Agent, page 164 Zepel Fabric Fluorodizer, page 164 Zeset Fabric Stabilizer, page 165 Zonyl Surfactant, page 165 Zoron Resin Finish, page 165 Lycra Spandex Fiber, page 65 Nylon 66, page 65 TOBACCO Orion Acrylic Fiber, page 65 Cellophane, page 25 Teflon TFE and FEP Fiber, page 65 Fertilizers, page 64 Film, Acetate, page 65 Fungicides, page 89 Finishes, Textile Floor Finish, page 77 Sodium CMC, page 142 Formaldehyde Solution, page 85 VPM Soil Fumigant, page 161 Hexalin Cyclohexanol, page 91 Hydraphthal Textile Processing Agent, page 92 Hydrogen Peroxide, page 92 TOILETWARE AND TOOTHBRUSHES i Latyl Carrier A, page 96 1 Lorol Fatty Alcohols, page 99 Bristles for Brushes, page 128 (Tynex) Cellophane, page 25 184 DUP210011327 TOILETWARE AND TOOTHBRUSHES (Coni.) Combs and Brushes, page 44 Films, pages 65 to 68 Pigment Colors, page 124 Plastics, pages 125 to 128 Sponges, Cellulose, page 144 Toiletries, page 153 Toothbrushes, page 158 Vexar Plastic Netting, page 161 TRANSPORTATION Automotive: Acids, Battery, page 3 Additives, Fuel Oil, page 113 Adhesives, page 6 Antifreeze Products, page 15 Automotive Specialties (7 Line), pages 1 8 to 21 Cements, page 26 Coated Fabrics, page 42 DMF (Dimethyl Formamide) Technical, page 51 Electroplating Products, page 55 Finishes: Automotive, pages 68 to 71 Refinishing Materials, pages 71 to 73 Fluxes, page 84 Freon Solvents, page 87 Methanol, page 103 Photographic Products, pages 116 to 124 Plastics, pages 125 to 128 Radiographic Products, page 132 to 134 Refrigerants, Freon, page 85 Resins (Not Molding), pages 134 to 137 Rivets, page 137 Sponges, Cellulose, page 144 Synthetic Rubber, pages 146 to 150 Tools, Construction and Industrial, pages 154 to 156 Triclene Phosphatizing Solutions, page 159 Aviation and Aerospace Ammonium Nitrate, CP Grade, page 11 Antifreeze Products, page 15 Antiknock Compounds, page 1 11 Cements, page 26 Cleaning Liquids-Freon, page 87 Coated Fabrics, page 42 Cold Gas Rocket Propellants, Freon, page 88 Dimethylamine (DMA), page 49 Electronic Materials, page 55 Fibers, Synthetic, page 65 Films, pages 65 to 68 Finishes, Aircraft, page 76 (Sold by Industrial Maintenance) Fire Extinguishing Agent, Freon, page 87 Fuel Oil Additives, Jet, page 114 Gasoline Additives, page 111 Hydrogen Peroxide, page 92 Hydrostatic Test Fluids, Freon, page 85 inert High-Density Fluids, Freon, page 85 Infrared Detector Coolants, Freon, page 85 Leak Detection Gases, Freon, page 85 Metal Products, page 102 Mild Detonating Fuse (MDF), page 104 Military Specialties, pages 116 to 124 Plastics, pages 125 to 128 Radiographic Products, page 132 Refrigerants, Freon, page 85 Rivets, page 137 Simulation Fluids for Testing Rocket Systems, Freon page 85 Solvents, Freon, page 87 Sponges, Cellulose, page 144 Tipersul Fibrous Potassium Titanate, page 153 Tools, Construction and Industrial, pages 154 to 156 Trichlorethylene, page 158 Triclene Phosphatizing Solutions, page 159 Urea, page 160 Weed and Brush Killers, poge 162 Wire Enamels, page 76 Railroad Equipment Adhesives, page 6 Cements, page 26 Coated Fabrics, page 42 Fibers, Synlhetic, page 65 Finishes, Maintenance, pages 76 to 83 Freon Solvents, page 87 Photographic Products, pages 116 to 124 Plastics, pages 125 to 128 Radiographic Products, page 132 Rivets, page 137 Sponges, Cellulose, page 144 Synthetic Rubber, pages 146 to 150 Tools, Construction and Industrial, page 154 Weed and Brush Killers, page 162 Ship and Boat Building Adhesives, page 6 Cements, page 26 Coated Fabrics, page 42 Finishes, Marine, page 81 Photographic Products, pages 116 to 124 Plastics, pages 125 to 128 185 DUP210011328 SHIP AND BOAT BUILDING (Cont.) Radiographic Products, page 132 Rivets, page 137 Tools, Construction and Industrial, page 154 Tools, Powder Actuated, page 156 MISCELLANEOUS INDUSTRIES Medical Services Cellophane, page 25 Combs and Brushes, page 44 Photographic Products, pages 116 to 124 Plastics, pages 125 to 128 Radiographic Products, page 132 Sponges, Cellulose, page 144 Tapes, Pressure Sensitive, Magnetic, Recording Cellophane, page 25 Cements, page 26 Cleaning Solvents, Freon, page 87 Films: Acetate, page 65 Mylar Polyester, page 66 Polyethylene, page 67 Tedlar PVF, page 67 Teflon FEP, page 67 Plastics, Plastacele Cellulose Acetate, page 127 Resins (Not Molding), pages 134 to 137 DUP210011329 DEPARTMENTAL SECTION This section contains the names and addresses of departments, divisions or subsidiary companies (including sales offices) which manufacture or market the products listed in this book. The names and addresses of foreign offices, representatives, subsidiary and affiliated companies are also included in this section. As a further aid to the user of this book, we have included in this section the Product In formation Centers located at strategic points throughout the country. IF YOU ARE NOT SURE of the department or product, call the Information Center nearest you for a prompt, courteous answer. PRODUCT INFORMATION CENTERS BALTIMORE, MARYLAND......................... (Handled by Wilmington Center) . . .(301) PLaza 2-2506 CHICAGO, Il l in o is ................................. 7 South Dearborn Street.....................(312) ANdover 3-7000 Los An g e l e s , Ca l if o r n ia ..... 7051 Santa Monica Boulevard.....................(213) Hollywood 9-6375 Hollywood, California NEW YORK, NEW Yo r k ..................................... 350 Fifth Avenue.....................(212) 971-4771 Ph il a d e l ph ia , Pe n n s y l v a n ia .... (Handled by Wilmington Center) . . .(215) WAInut 3-2493 Sa n Fr a n c is c o , Ca l if o r n ia .... 1600 Trousdale Drive............ Burlingame, California (415) OXford 7-3876 WASHINGTON, D. C............................ (Handled by Wilmington Center) . . . (202) DUpont 7-0416 WILMINGTON, De l aw a r e ................. Ground Floor, Du Pont Building .... (302) PRospect 4-2421 Du Pont personnel (outside Wilmington area) call: Extension 2421 Du Pont personnel (Wilmington ONLY) call: H. L. Brand.............................................. Ext. 2253 C. T. Welsh, Jr.......................... R. D. Brendle............................................ Ext. 6081 S. A. Shelley............................ D. E. Harkins............................................ Ext. 5820 M. C. Rogers......................... Ext. 3281 Ext. 7724 Ext. 3084 187 DUP210011330 . . DEVELOPMENT DEPARTMENT INSTRUMENT PRODUCTS DIVISION GENERAL OFFICE: 2102 Northeast Blvd., Wilmington, Delaware 19898 . (302) PRospect 4-2421 ELASTOMER CHEMICALS DEPARTMENT (Elastomers) GENERAL OFFICE: Nemours Building, Wilmington, Delaware 19898 .... (302) PRospect 4-2421 EXPORT OFFICE: Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 SALES OFFICES: Akron, Ohio 44308............................. 40 East Buchtel Avenue............... (216) 253-5571 at High Street Atlanta, Georgia................................ P. O. Box 296,.................................. (404) 451-2611 Doraville, Ga. 30040 Boston, Massachusetts 02110 .... 140 Federal Street........................(617) 426-1719 Charlotte, North Carolina 28201 . . 427 W. 4th Street.......................... (704) 375-5561 Des Plaines, Illinois 60016 455 E. State Road...............................................(312) 827-0141 Detroit, Michigan 48235 ................. 13000 West Seven Mile Road . . (313) 864-1963 Los Angeles, California 90058. . . . 2930 East Forty-fourth Street . . (213) 582-6464 Palo Alto, California 94304 ............ 701 Welch Road.............................(415) DAvenport 6-7550 Trenton, New Jersey 08607 329 W. State Street......................................(609) EXport 3-7141 (New York, N.Y. to reach Trenton Office, call WAIker 5-3290) DUP210011331 ElECTROCHEMICALS DEPARTMENT (Electrocham.) GENERAL OFFICE: DuPont Building, Wilmington, Delaware 19898 (302) PRospect 4-2421 EXPORT OFFICE: DuPont Building, Wilmington, Delaware 19898 (302) PRospect 4-2421 SALES OFFICES: Atlanta, Georgia............................. 4280 Northeast Expwv, ~ P.O.Box 296 '' 14041 451-2611 `' Doraville, Ga. 30040 Charlotte, North Carolina 28201.427 W. 4th Street........................(704) Chicago, Illinois................................. 7250 N. Cicero Ave..................... (312) Lincolnwood, III. 60646............ (312) Cleveland, Ohio 44120...................11900 Shaker Blvd.........................(216) (216) Dallas, Texas 75221 ....................... 8510 Ambassador Row............ (214) P. O. Box 3187 Los Angeles, California.................. 3503 Hoyt Ave. P.O. Box 70 . . (213) El Monte, Calif. 91734 (213) New York, New York 10001 .... Empire State Bldg........................(212) 350 Fifth Ave. Philadelphia, Pennsylvania............. 308 E. Lancaster Ave...................(215) Wynnewood, Pa. 19096 San Francisco, California 94124 . 1485 Bayshore Blvd.................... (415) DUP210011332 EXPLOSIVES DEPARTMENT (Exp!o.) GENERAL OFFICE: EXPORT OFFICE: SALES OFFICES: Nemours Building, Wilmington, Delaware 19898 .... (302) PRospect 4-2421 Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 CKEmiCAL PRODUCTS SALES DiViSiON Boston, Massachusetts 02110 ..... 140 Federal Street. . . , (617) HAncock 6-1724 & 6-1725 Charlotte, North Carolina 28201. . . 427 W. 4th Street . . . (704) 375-5561 Chicago, Illinois....................................... 7250 N. Cicero Ave. . Lincolnwood, III. 60646 (312) 463-7250 (Chicago calls) (312) 675-1010 (other calls) Cleveland, Ohio 44120........................ 11900 Shaker Blvd................. (216) LOngacre 1-5070 Houston, Texas 77027...........................P. O. Box 22207 .................... (713) MOhawk 7-9197 Los Angeles, California 90058 .... 2930 E. 44th Street............ (213) LUdlow 2-6464 New York, New York 10001............... 4700 Empire State Bldg. . (212) 971-4000 350 Fifth Ave. EXPLOSIVES PRODUCTS SALES DIVISION Atlanta, Georgia 30309 ..................... 1430 W. Peachtree St. ... (404) 872-2332 Birmingham, Alabama 35223............No. 15 Office Park Circle . . (205) 879-0466 P. O. Drawer 7347 Chicago, Illinois...................................... 7250 N. Cicero Ave..................(312) 463-7250 Lincolnwood, III. 60646 (Chicago calls) (312) 675-1010 (other calls) Dallas, Texas 75219 ............................. 3000 Turtle Creek Plaza . . . (214) 526-7455 Denver, Colorado 80202 .....................Midland Savings Bldg. . . . (303) MAin 3-1253 444 17th Ave. Duluth, Minnesota 55802.................... Hartley Building.........................(218) RAndolph 4-8593 742 E. Superior St. Harrisburg, Pennsylvania 17101 ... 105 N. Front St........................ (717) 233-7909 Huntington, West Virginia 25716. . . West Virginia Bldg..................(304) 525-5124 Fourth Ave. and Ninth St. Kansas City, Missouri 64114 9208 Wyoming Place.............................(816) 363-1155 . . Los Angeles, California 90058 .... 2930 E. 44th St..........................(213) 582-6464 New York, New York 10001 ...............Empire State Bldg....................... (212) 971-4000 350 Fifth Ave. Pittsburgh, Pennsylvania 15222. . . . One Gateway Center............. (412) ATIantic 1-7777 Salt Lake City, Utah 84111 604 Judge Bldg........................................... (801) 363-3801 Eight East Broadway Seattle, Washington 98101 ............... 1127 Washington Bldg. . . (206) MAin 3-8830 Fourth and Union Sts. 190 DUP210011333 FABRICS AND FINISHES DEPARTMENT (F.&F.) AUTOMOTIVE AND INDUSTRIAL PRODUCTS DIVISION GENERAL OFFICE: Du Pont Building, Wilmington, Delaware 19898 . EXPORT OFFICE: Nemours Building, Wilmington, Delaware 19898 . (302) PRospect 4-2421 (302) PRospect 4-2421 Automotive Finishes AUTO MANUFACTURERS' SALES OFFICES: Detroit, Michigan 48202 ............ 5-235 General Motors Bldg. . . (313) 875-1990 Los Angeles, California 90022 . 2000 S. Garfield Ave.................... (213) 723-8401 COLOR ADVISORY SERVICE: Detroit, Michigan 48202 ............ 5-235 General Motors Bldg. . . (313) 875-1990 Fabrics Sales SALES OFFICES: Detroit, Michigan 48202 ............ 5-235 General Motors Bldg. . . (313) 875-1990 Fairfield, Connecticut 06433. . . Fairfield Plant.................................(203) CLearwater 9-3351 Los Angeles, California 90022 . 2000 S. Garfield Ave.................... (213) 723-8401 Newburgh, New York 12550 . . Newburgh Plant...........................(914) JOhn 1-3700 Industrial Finishes SALES OFFICES-. Chicago, Illinois............................. 7250 N. Cicero Ave....................... (312) 463-7250 Lincolnwood, III. 60646 Greensboro, North Carolina. . . 2804 Patterson St...........................(919) 299-3100 27407 or (919) 299-3101 Philadelphia, Pennsylvania . . . . 308 E. Lancaster Ave.....................(215) TRinity 8-2700 Wynnewood, Pa. 19096 San Francisco, California............ 1600 Trousdale Drive..................(415) OXford 7-3870 Burlingame, Calif. 94010 Refinish Sales SALES OFFICES: Atlanta, Georgia 30318 ............ 1737 Ellsworth Industrial............ (404) 355-1230 Drive, N.W. P.O. Box 19714, Station "N" Chicago, Illinois............................. 7250 N. Cicero Ave....................... (312) 463-7250 Lincolnwood, III. 60646 Cleveland, Ohio 44114.............. 3133 Chester Ave............................. (216) 621-8516 Dallas, Texas 75221 .................... 8510 Ambassador Row............... (214)631-4140 Philadelphia, Pennsylvania. . . . 308 E. Lancaster Ave..................... (215) TRinity 8-2700 Wynnewood, Pa. 19096 San Francisco, California............ 1600 Trousdale Drive..................(415) OXford 7-3870 Burlingame, Calif. 94010 CONSUMER PRODUCTS DIVISION GENERAL OFFICE: Du Pont Building, Wilmington, Delaware 19898 .... (302) PRospect 4-2421 191 DUP210011334 FABRICS AND FINISHES DEPARTMENT (Cont.) Antifreeze Products SALES OFFICES: Chicago, Illinois............................. 7250 N. Cicero Ave......................... (312) 463-7250 Lincolnwood, III. 60646 Denver, Colorado 80202............919 Midland Savings Bldg. . . . (303) 825-6388 Detroit, Michigan 48235 ............ 13000 W. Seven Mile Rd............. (313) 864-1963 Philadelphia, Pennsylvania . . . 308 E. Lancaster Ave...................... (215) TRinity 8-2700 Wynnewood, Pa. 19096 St. Louis, Missouri 63105 ............ 10 S. Brentwood Blvd................... (314) PArkyiew 6-1400 Lawn and Garden Products SALES OFFICE: Wilmington, Delaware 19898. . 1007 Market St...............................(302) PRospect 4-2421 Specialties Sales ("7" Automotive; Household (Sponges)) SALES OFFICE: Wilmington, Delaware 19898. . 900 Wilmington Trust Bldg. . . (302) PRospect 4-2421 Trade Sales SALES OFFICES: Atlanta, Georgia 30318 ............1737 Ellsworth Industrial...............(404) 355-1230 Drive, N.W. P. O. Box 19714, Station "N" Chicago, Illinois............................. 7250 N. Cicero Ave......................... (312) 463-7250 Lincolnwood, III. 60646 Philadelphia, Pennsylvania. . . . 308 E. Lancaster Ave.....................(215) TRinity 8-2700 Wynnewood, Pa. 19096 San Francisco, California............1600 Trousdale Drive.......................(415) OXford 7-3870 Burlingame, Calif. 94011 POROMERIC PRODUCTS DIVISION GENERAL OFFICE: 1000 Wilmington Trust Building, Wilmington, Delaware 19898........................... (302) PRospect 4-2421 EXPORT OFFICE: Nemours Building, Wilmington, Delaware 19898 .... (302) PRospect 4-2421 SALES OFFICES: Boston, Massachusetts................. 45 Fourth Ave...................................... (617) TWinbrook 9-8300 Waltham, Mass. 02154 New York, New York 10001 . . . Empire State Bldg.......................... (212) 971-4000 350 Fifth Ave. 192 DUP210011335 FILM DEPARTMENT GENERAL OFFICE: Nemours Building, Wilmington, Delaware, 19898 (302) PRospect 4-2421 EXPORT OFFICE: Nemours Building, Wilmington, Delaware, 19898 (302) PRospect 4-2421 SALES OFFICES: Atlanta, Georgia 30314.................... 1430 W. Peachtree St., N.W. . . (404) TRinity 2-5827 Boston, Massachusetts 02110 .... 140 Federal St................................(617) TWinbrook 9-8300 Burlingame, California 94011 .... 1870 El Camino Real....................(415) OXford 7-1520 Chicago, Illinois 60603....................... 7 S. Dearborn St.............................. (312) ANdover 3-7000 Cleveland, Ohio 44116 .................... 20575 Center Ridge Rd..................(216) EDison 3-1424 Rocky River Kansas City (See Prairie Village, Kansas) Los Angeles, California 90058 .... 4455 Fruitland Ave..........................(213) LUdlow 2-7361 New York, New York 10001............Empire State Bldg.............................. (212) 971-4000 350 Fifth Ave. Philadelphia (see Wynnewood, Pa.) Prairie Village, Kansas 66208............7301 Mission Rd................................(913) ENdicott 2-8511 San Francisco (see Burlingame, Calif.) Wynnewood, Pennsylvania 19096 . 308 E. Lancaster Ave.................... (215) TRinity 8-2700 193 DUP210011336 GENERAL SERVICES DEPARTMENT SURPLUS MATERIALS DIVISION: Nemours Building, Wilmington, Delaware 19898.........................................(302) PRospect 4-3700 INDUSTRIAL AND BIOCHEMICALS DEPARTMENT (Ind. & Bio.) GENERAL OFFICE: Du Pont Building, Wilmington, Delaware 19898 .... (302) PRospect 4-2421 EXPORT OFFICE: Du Pont Building, Wilmington, Delaware 19898 .... (302) PRospect 4-2421 SALES OFFICES: BIOCHEMICALS DIVISION Atlanta, Georgia 30308................................... 739 W. Peachtree St........................ (404) 876-1585 Houston, Texas 77027......................................4215 Richmond Ave........................... (713) 666-0251 Palo Alto, California 94304 .......................... 701 Welch Rd.....................................(415) 326-6044 Philadelphia (see Wynnewood, Pa.) Western Springs, Illinois 60558 ..................... 40 Forty-Seventh St.......................... (312) 242-2658 (Chicago calls) (312) 246-5902 (ot Wynnewood, Pennsylvania 19096............... 308 E. Lancaster Ave..........................(215) 878-2700 INDUSTRIAL CHEMICALS DIVISION* Atlanta, Georgia 30308................................... 739 W. Peachtree St........................ (404) 876-1585 Chicago, Illinois 60632 ................................... 4251 S. Crawford Ave.....................(312) 254-7676 Cleveland, Ohio 44120 ................................... 12800 Shaker Blvd........................... (216) 752-7100 Houston, Texas 77027......................................4215 Richmond Ave..................... (713) 666-0251 New York, New York 10001 .......................... Empire State Bldg............................... (212) 971-4000 350 Fifth Ave. Philadelphia (see Wynnewood, Pa.) Pittsburgh, Pennsylvania 15222.....................Suite 530 ..............................................(412) 471-5427 Four Gateway Center Wynnewood, Pennsylvania 19096 ............... 308 E. Lancaster Ave........................(215) 878-2700 *Van Waters and Rogers, Inc. are Sales Representatives with offices.in: Albuquerque, Boise, Denver, El Paso, Los Angeles, Phoenix, Portland, Salt Lake City, San Diego, San Francisco, Seattle, Spokane and West Sacramento. See local phone books for addresses. 194 &. DUP210011337 ORGANIC CHEMICALS DEPARTMENT (Qrchem.) GENERAL OFFICE: EXPORT OFFICE: SALES OFFICES: Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 DYES AND CHEAA1CALS D!V!S!ON Charlotte, North Carolina 28201 . . . 427 W. 4th St.................................... (704) FRankiin 5-5561 Chicago, Illinois 60603 ........................ 7 S. Dearborn St................................ (312) ANdover 3-7000 Clifton, New Jersey 07012 .................. 50 Page Rd........................ (201) PRescott 3-5600 Doraville, Georgia 30400..................... 4280 Northeast Expwy....................(404) 451-2611 Box 296 Palo Alto, California 94304 ............... 701 Welch Rd..................................... (415) 326-7550 Philadelphia, Pennsylvania 19103 . . 1616 Walnut St.................................(215) Kingsley 5-1950 Rumford, Rhode Island 02916............ 50 North Broadway.........................(401) GEneva 4-6500 FREON PRODUCTS DIVISION Chicago, Illinois 60603 ....................... 7 S. Dearborn St................................(312) 263-7000 East Orange, New Jersey 07018 ... 60 Glenwood Ave.............................. (201) 676-1112 El Monte, California 91734................ 3503 N. Hoyt St.................................. (213) 283-0548 Houston, Texas 77002.......................... 704 Bank of Commerce Bldg. . . (713) 222-2468 Palo Alto, California 94304 ............... 701 Welch Rd........................... (415) 326-2840 PETROLEUM CHEMICALS DIVISION Chicago, Illinois 60603 ....................... 8 S. Michigan Blvd.................. (312) 939-2540 Houston, Texas 77002.......................... 705 Bank of Commerce Bldg. . . (713) CApital 5-1151 Los Angeles, California 90017 ............ 612 S. Flower St.................................(213) MAdison 4-1354 New York, New York 10020 ............... 45 Rockefeller Plaza.......................(212) 971-4000 Philadelphia, Pennsylvania 19102 . . 3 Penn Center Plaza........................ (215) LOcust 8-3531 San Francisco, California 94104 ... Ill Sutter St.....................................(415) EXbrook 2-1934 Seattle, Washington 94080................ P. O. Box 218 ...................................... (206) MEIrose 2-6977 Mercer Island Tulsa, Oklahoma 74101...................... P. O. Box 730 ...................................... (918) LUther 3-8581 195 DUP210011338 PHOTO PRODUCTS DEPARTMENT (Photo Prod.) GENERAL OFFICE: Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 EXPORT OFFICE: Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 SALES OFFICES: Atlanta. Georgia 30325 ................................ 1737 Ellsworth Industrial............... (404) 355-1230 Drive, N. W. Chestnut Hill, Massachusetts 02167............... 824 Boylston St................................. (617) 899-8300 Chicago, Illinois.................................................. 4560TouhyAve.................................(312) 675-1010 Lincolnwood, III. 60646 Cleveland, Ohio 44116................................... Room 116, 20575 Center.................(216) 333-3674 Ridge Road Clifton, New Jersey 07012............................. 380 Allwood Rd...............................(201) GR 3-4004 Allwood Station Dallas, Texas 75247 ................................... .3120 Commonwealth Dr. . . . (214) ME 1-1662 Los Angeles, California................................... 7051 Santa Monica Blvd................. (213) 469-5147 Hollywood, Calif. 90038 Wynnewood, Pennsylvania 19096 ............... 308 E. Lancaster Ave........................(215) 878-2700 DUP210011339 PIGMENTS DEPARTMENT GENERAL OFFICE: Nemours Building, Wilmington, Delaware 19898 . . (302) PRospect 4-2421 EXPORT OFFICE: Nemours Building, Wilmington, Delaware 19898 . . (302) PRospect 4-2421 SALES OFFICES: Chicago, Illinois 60606 .......................... 20 N. Wacker Dr...........................(312) ANdover 3-7000 Cincinnati, Ohio 45206............................ 2330 Victory Pkwy........................ (513) AVon 1-2343 Cleveland, Ohio 44113 .......................... 33 Public Square Blag................. (216) 621-1555 Clifton, New Jersey 07012 .................... 50 Page Rd......................................(201) PRescott 3-5600 Detroit, Michigan 48235 ....................... 13000 W. Seven Mile Rd. . . (313) 864-1963 Doraville, Georgia 30400 .................... 4280 Northeast Expwy................(404) 451-2611 Houston, Texas 77027............................. 3202 Weslayan Ave..................... (713) MOhawk 6-0161 P. O. Box 22066 Malden, Massachusetts 02148............... 359 Washington St.......................(617) DAvenport 2-8080 Pasadena, California 91107.................. 3750 E. Foothill Blvd.................... (213) 684-0925 Philadelphia, Pennsylvania 19103 ... 117 S. 17th St................................ (215) LOcust 3-2080 Portland, Oregon 97209 ....................... 1238 N.W. Glisan St....................(503) CApitol 2-6012 San Francisco, California 94124 .... 1485 Bayshore Blvd..................... (415) JUniper 5-9231 DUP210011340 PLASTICS DEPARTMENT GENERAL OFFICE: EXPORT OFFICE: SALES OFFICES: Du Pont Building, Wilmington, Delaware 19898 . . . . (302) PRospect 4-2421 Du Pont Building, Wilmington, Delaware 19898 _____(302) PRospect 4-2421 COMMERCIAL RESINS DIVISION Boston, Massachusetts 02110............ . 140 Federal St...................... (617) HAncock 6-1711 Chicago, Illinois................................... . 7250 N. Cicero Ave.............. (312) 463-7250 Lincolnwood, III. 60646 Detroit, Michigan 48235.................... . 13000 W. Seven Mile Rd. (313) 864-1963 Los Angeles, California 90058 . . . . . 2930 E. 44th St..................... (213) LUdlow 2-6464 New York, New York 10001 ............ . Empire State Bldg................ (212) 971-4253 350 Fifth Ave. Philadelphia, Pennsylvania 19103 . . 1616 Walnut St.................... (215) Kingsley 6-4600 FLUOROCARBONS DIVISION Chicago, Illinois................................... . 7250 N. Cicero Ave............. (312) 463-7250 Lincolnwood, III. 60646 Los Angeles, California 90058 . . . . . 2930 E. 44th St..................... (213) LUdlow 2-6464 New York, New York 10001 ............ . Empire State Bldg................ (212) 971-4253 350 Fifth Ave. Philadelphia, Pennsylvania 19103 . . 1616 Walnut St..................... (215) Kingsley 6-4600 PLASTIC PRODUCTS DIVISION New York, New York 10001 ............ . Empire State Bldg................ (212) 971-4253 350 Fifth Ave. Tulsa, Oklahoma 74107.................... . 4501 W. 49th St................... (918) Hickory 6-4471 P. O. Box 16 Red Fork Station POLYOLEFINS DIVISION Chicago, Illinois................................... . 7250 N. Cicero Ave. . . . Lincolnwood, III. 60646 (312) 463-7250 New York, New York 10001............ . Empire State Bldg.............. .(212) 971-4000 350 Fifth Ave. Wilmington, Delaware 19898 . . . . .Room 13120 ........................ (302) PRospect 4-5668 Du Pont Bldg. (Film & Coating) (302) PRospect 4-6721 (Pipe & Molding) (302) PRospect 4-6696 (Wire & Cable) 198 DUP210011341 REMINGTON ARMS COMPANY, INC. (Stock owned: common 60.17%; preferred 99.60%) (Rem. Arms) GENERAL OFFICE: Bridgeport, Connecticut 06602 (203) 333-1112 BRANCH OFFICES: (Including Peters Cartridge Division) Berkeley, California 94712................. 2733 San Pablo Ave. (415) THornwall 8-5514 Boston Office............................................ 939 Barnum Ave. Bridgeport, Conn. 06602 (203) 336-3366 Chicago, Illinois 60603 ....................... 1612 First Federal Bldg............ (312) STate 2-7781 Cleveland, Ohio 44114 ....................... 1308 Union Commerce Bldg. . (216) PRospect 1-7804 Dallas, Texas 75206 ............................. 1241 Dallas Athletic Club Bldg. (214) EMerson 8-6059 Greensboro, North Carolina 27401 .517 Jefferson Bldg....................... (919) BRoadway 2-6879 Jacksonville, Florida 32207................. 1603 Prudential Bldg.................. (305) FLanders 9-4252 841 Miami Rd. Memphis, Tennessee 38116................. 305 First National Bank Bldg. . 4230 Highway 51, South Minneapolis, Minnesota 55402 .... 614 Plymouth Bldg. New York Office. . ................................ 939 Barnum Ave. Bridgeport, Conn. 06602 Pittsburgh, Pennsylvania 15220 .... 200 Union Carbide Bldg. 875 Greentree Rd. St. Louis, Missouri 63101.................... 1810 Arcade Bldg. Salt Lake City, Utah 84111................. 909 Walker Bank Bldg. DUP210011342 TEXTILE FIBERS DEPARTMENT (Tex. Fibers) GENERAL OFFICE: Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 EXPORT OFFICE: Nemours Building, Wilmington, Delaware 19898. . . . (302) PRospect 4-2421 SALES OFFICES: Akron, Ohio 44308 ......................................191 S. Main St................................ (216) 253-5571 Charlotte, North Carolina 34261............ 427 W. 4th St.................... (704) FRankiin 5-5561 New York, New York 10001...................... Empire State Bldg............ (212) 350 Fifth Ave. 971-4000 Philadelphia, Pennsylvania....................... 308 E. Lancaster Ave.................. (215) TRinity 8-2700 Wynnewood, Pa. 19096 Rumford, Rhode Island 02916................. 50 N. Broadway........................... (401) GEneva 4-6500 i: r | ii 900 DUP210011343 1 w i:; I- BRAZIL (Cent.) Rio de Janeiro Av. Graca Aranha 333, Edificio Raldia Du Pont do Brasil S.A.--Industrias Quimicas............... Branch Office CANADA Montreal, Quebec Du Pont Building, 1135 Beaver Hall Hill Du Pont of Canada Limited................................................................................................ General Office 1011-17th Avenue, S.W. Du Pont of Canada Limited Calgary, Alberta Branch Office Halifax, Nova Scotia * 379 Barrington Street Du Pont of Canada Limited Ml- London, Ontario 200 Queens Avenue Du Pont of Canada Limited Branch Office Branch Office 85 Eglinton Avenue, East Du Pont of Canada Limited Toronto, Ontario Vancouver, British Columbia 1687 West Broadway Du Pont of Canada Limited Branch Office 6 Donald Street South Du Pont of Canada Limited Winnipeg, Manitoba Branch Office CHILE Santiago Calle Agustinas 1350, Piso 3 Compania Sud-Americana de Explosivos Antofagasta Calle Baquedano 184, Piso 2 Compania Sud-Americana de Explosivos COLOMBIA General Office Branch Office DUP210011345 DENMARK Copenhagen c/o Elof Hansson A/S, H. C. Orstedvej 4 J. Sjostrom..............................................................................................................Technical Representative Du Pont de Nemours International S.A. Film c/o Elof Hansson A/S, H. C. Orstedvej 4 Dag Sandborg....................................................................................................... Technical Representative Du Pont de Nemours International S.A. Plastics Uglestrup/Kr. Saby "Pilehuset" P. Klausen.................................................................................................................Technical Representative Du Pont de Nemours International S.A. Agricultural & Industrial ENGLAND London 76 Jermyn Street, S.W.l Du Pont Company (United Kingdom) Ltd..........................................................................General Office Lei caster Epic House Lower Hill Street Du Pont Company (United Kingdom) Ltd............................................................................ Branch Office Manchester Peter House St. Peter's Square Du Pont Company (United Kingdom) Ltd............................................................................ Branch Office FRANCE Paris 11, Avenue Delcasse Dekachimie, S.A.......................................................................................................................General Office 11, rue de Teheran Du Pont de Nemours (France) S.A...................................................................................... General Office 77, Avenue des Champs-Elysees Du Pont de Nemours (France) S.A........................................................................................ Branch Office 77, Avenue des Champs-Elysees E. S. Voutetakis...................................................................................................Technical Representative Du Pont de Nemours International S.A. Elastomers GERMANY Dusseldorf Bismarckstrasse 95 Du Pont Chemie G.m.b.H...................................................................................................... General Office 203 DUP210011346 GERMANY (Cont.) Frankfurt/Main Niedenau 47 Adox Fotowerke Dr. C. Schleussner G.m.b.H.................................................................. General Office Duisburger Strasse 121 Pigment-Chemie, G.m.b.H Homberg (Niederrhein) General Office D'Orvillestrasse 2 S. Schoell . Micheistadt, Odw. ....................... Technical Representative Du Pont de Nemours International S.A. Agricultural & Industrial Kerner Strasse 19B Du Pont Chemie G.m.b.H Stuttgart Representative Office HONG KONG Hong Kong 1008-1009 Alexandra House 11 A Des Voeux Road C. Du Pont Far East Inc..................................................................................................................Branch Office INDIA Bombay c/o Indmag Private Ltd. Corinthian 17 Arthur Bunder Road Colaba, Post Bag No. 10012 N. J. Gajjar............................................................................................................Technical Representative Du Pont Far East Inc. ! ITALY | | Milan 1 Via Tito Speri, 8 I | Du Pont de Nemours Italiana S.p.A................................................................................... General Office I , 44, via Jommelli I < E. Pozzi...................................................................................................................Technical Representative | >( Du Pont de Nemours International S.A. |I jj"j Via Tito Speri, 8 Agricultural & Industrial ii E. C. Botti................................................................................................................Technical Representative 11 Du Pont de Nemours International S.A. I Film i ii JAPAN i1 (>! Tokyo !j! 105N Aoyama Dai-lchi Mansions i | No. 11, 4-Chome, Akasaka Omote-Machi 204 DUP210011347 JAPAN (Cont.) Minato-Ku Du Pont Far East Inc.................................................................................................................. Branch Office Mitsui Seimei Building No. 1, 1-Chome, Ohte Machi ( Chiyoda-Ku Mitsui Polychemicals Company, Ltd................................................................................... General Offce Ohtemachi Building 4, 1-Chome, Ohtemachi Chiyoda-Ku Nitto Fluorochemicals Company, Ltd................................................................................. General Offce Matsukei Building No. 2,11-Gochi Shiba Park Minato-Ku Showa Neoprene K.K............................................................................................................. General Offce Toray Building No. 2, 2-Chome, Nihonbashi-Muromachi Chuo-Ku Toyo Products Company, Ltd............................................................................................... General Offce LUXEMBOURG Luxembourg City 2, Boulevard Royal Du Pont de Nemours (Luxembourg) S.A........................................................................... General Offce MEXICO Garza Garcia, N. L. La Leona Policron de Mexico, S.A.........................................................................................................General Offce Guadalajara, Jalisco Av. Juan Manuel 1186 Du Pont, S.A. de C.V.................................................................................................................Branch Offce Mexico, D.F. Av. Juarez 117, Edificio Jalisco Du Pont, S.A. de C.V...............................................................................................................General Office Calle de Sullivan 31, Piso 6 Halocarburos, S.A....................................................................................................... .. General Office Av. Juarez 117, Edificio Jalisco Pigmentos y Productos Quimicos, S.A. de C.V.................................................................General Office Paseo de la Reforma 262 ler Piso Tetraetilo de Mexico, S.A...................................................................................................... General Office Monterrey, N.L. Ira Calle de Gonzalitos No. 566 Esq. Avenida Fleteros Du Pont, S.A. de C.V.................................................................................................................Branch Offce 205 DUP210011348 MEXICO (Cont.) Torreon, Coahuila Edificio Banco de Mexico Du Pont, S.A. de C.V................................................................................................................. Branch Office NETHERLANDS The Hague Nillmij Building 214 Stadhoudersplantsoen Du Pont de Nemours (Nederland) N.V.............................................................................. General Office PERU Lima Avenida Tacna 592, Edificio Tacna, Piso 11 Du Pont (Peru) S.A................................................................................................................... General Office '1 i SPAIN Madrid iI:; c/o Desarrollo Quimco Industrial S.A. h Avenida Calvo Sotelo 27-4 P. Tarquis ................................................................................................................Technical Representative Du Pont de Nemours international S.A. Agricultural & Industrial : I* Si Avenida Calvo Sotelo 27-4 Desarrollo Quimico Industrial S.A.......................................................................................General Office ;l i SWEDEN Marsta Industrigatan 1 Du Pont de Nemours Nordiska A.B.....................................................................................General Office Gothenburg Sodra Vagen 50 Du Pont de Nemours Nordiska A.B....................................................................................... Branch Office Malmo Lettlandsgatan 1 Du Pont de Nemours Nordiska A.B....................................................................................... Branch Office Stockholm (Sundbyberg) P. O. Box 51 Du Pont de Nemours Nordiska A.B. Branch Office SWITZERLAND 29 bis, rue de Lancy Du Pont de Nemours International S.A Geneva General Office DUP210011349 DUP210011350