Document Qg5yYVJ67GRgvpmjOg3GwYY7o
tm 0837f
PIPING SPEC U DATE I l -- 2 0 -- 7 G PAGE X CF 4
ITEM PIPE
SIZE
300-LB MCNFL SYSTEM PROCESS
95 PERCENT AND 100 PERCENT ChLCRINE 250 PSIG AT 3 5 OF -- 500PSIG 2 100F
DESCRIPTION
P-42
1/4 THRU 12
ASTM B--165 ANNEALED. SCH 40S SEAMLESS MONEL PIPE.
FIT TINGS
= 90 OF G LL. L=45 DEG ELL. T=TEE. X=CROSS, fi=REDLCER C = C 0JPLIN . S= STUB ENC. U = U NION. PC=IPE CAP
ELTR-69
1/4 THRU 3/4
2000-LB THREADED FCRGED ANNEALED NICKEL COPPER (MONEL) FITTINGS, ASTM 0-564, DIMENSIONS PER ANSI B16.ll.
C-16C
1/4 THRU 3/4
3 0 00--L E THREADED MCNEL COUPLING, ASTM B-564 ANNEALED NICKEL COPPER, ANSI H16.1I 0 IMENS10NS.
C- 16T
1/4 THRU 3/4
3000--LC MONEL THRECCLET, ASTM B-564 ANNEALED NICKEL COPPER.
PC- 1 3
t/4 THRU 3/4
THREADED SOLID MONEL SCUARE HEAD PLUG. ASTM B-564 ANNEALED NICKEL COPPER, DIMENSIONS PER ANSI B16.il.
U- l 4 R--209
i/4 thru 3/4 1/4 THRU 3/4
3000-LE THREADED MCNEL UMCN, ASTM E-564 ANNEALED NICKEL COPPER.
STD WEIGHT FCRGED MONEL SWAGED NIPPLE, THREADED, BEVELED, PLAIN OR ANY COMBINATION OF ENDS.
ELTP-71
1 THRU 12
SCH 4 0 S MONEL WELDING FITTINGS, ASTM E-366 GR WPNC ANNEALED, ANSI 816.9.
NOTE
WELDING ELBCWS SHALL OE LONG RADIUS.
S-25
1/2 THRU 12
SCH 40 S MONEL STUE ENC, ASTM B-366 GR WPNC* ANSI 816.9, MSS SP-43 LENGTH.
PC-70
l THRU 12
SCH 40 S MONEL WELDING C AP, ASTM B-266 GR WPNC ANNEALED. ANSI B16.9.
N-g
NO THREADED FITTINGS PERMITTED UNLESS ISOLATED
tJHL
PIPING SPFC U
R A438O
I l-20-7e
ST0408375
PIPING SPEC U CATE 11-20-78 PAGE 2 CF 4
91(80*1019
ITEM
SIZE
FLANGES F--6 F-7-RF N-63
1/2 THRU 1? 1/2 THRU 12
BRANCH CONNECTIONS
3C-2S
1/4 THRU 3/4
N-SP300 BC-59W
1 THRU 12
GASKETS G--24
1/2 THRU 12
JOINT CCM0'JND
JC- IS
FLANGE BOLTS
8--A193370
1/2 THRU 12
OE SCR IPTION
FRCM PROCESS CF SOURCE EY WELDED OP FLANGED VALVE.
300-LE LAP JOINT FLANGE. A S T V A--10 5, ANSI 316.5.
3C0-L8 RAISED FACE BLINC FLANGE. A STM A- 105, ANSI 8 16.5.
8LIND FLANGES SHALL HAVE 16 GAUGE VCNEL LCCSE PLATE DISC. DISC SHALL BE SAVE CIA STD CUT RING GASKET. WITH TAB. TAB SHALL EXTEND MINIMUM 1 INCH BEYOND FLANGE QD.
AS
FOP THREADED PIPING. USE STRAIGHT SIZE CR REDUCING TEE. WHEN ERANCH IS SMALLER THAN HEADER. A NIPPLE ANC RECUCING COUPLING OR SWAGED NIPPLE V AY EE USED.
NC THREADED FITTINGS TC BE USEC BETWEEN FLANGEO VALVES AND PROCESS PIPING.
FOR WELDED PIPING. USE STRAIGHT SIZE CR REDUCING TEE. WELDOLET CR REINFORCING PAD MAY BE USED IN PLACE CF REDUCING TEE WHEN BRANCH IS SMALLER THAN HEADER. FOR THREADED BRANCH CONNECTION, USE 3000-LB FULL COUPLING. THRECOLET, CR NIPCLET WELCED TO HEADER .
SPIRAL-WCUND, 216 STAINLESS STEEL-AS8ESTOS GASKET, FLEXITALLIC CG. GARLOCK CR. LAMONS WR. JM--913 OR STERLING GR.
TEFLON TAPE 1/2 INCH BY 2 MIL THICKNESS.
ASTM A--193 GR E7 LIQUIC QUENCHED ANC TEMPEPFO ALLOY STEEL STUD BOLTS WITH ASTM A-194 GR 2H HEAVY HEX NUTS.
BHL 11-20-78
PIPING SPEC U
F A4 36 0
ST0408376
PIPING SPEC U OATE 1 1-20--7 fi PAGE 3 CF 4
UC80H01*
ITEM
SIZE
DESCRIPTION
BOLT LUBRICANT
BL-5
JET-LUBE SS-3C COPPER ANTI-SEIZE CCMPCUND.
VALVES
V-743M
l THRU 6
300-LB FLANGED STEEL BALL VALVE WITH MONEL 3 A L L PE INF TEFLON SEATS AND TEFLON SEALS. I" AND UNDER SHALL HAVE KCUND OR CVAL HANDLE. 1 1/4" AND OVER LEVER OPERATOR. CONTRO C-1683-RI HILLS MC C S301-CS-R-MC JAMES9URV DC300F--22--7 1 -- MT MAFPAC CS-300-e-RT SMITH 430J WKM 3120-CS-02-ML
*V-?42
1/4 THRU 3/4
200-LB SCRCWED MONEL eALL VALVE. TEFLCN SEATS AND SEALS. 1" AND UNDER SHALL HAVE ROUND CR OVAL HANDLE. 1 1/4" AND OVER LEVER OPERATOR. 3 0 OF MAXIMUM ALLOWABLE TEMPERATURE. ALOYCO 3030C (MONEL) CONTRO C-lltl-II HILLS MC C F602-M0-T JAMESDURY A71-TT {T / V ) LAD l SH 4300 PACIFIC M-225-P5 <T/W)
V-6 0 7
1/4 THRU 3/4
300-LB SCREWEO OS/Y SCLID ALL MCNEL. ALOYCO 2210-M3S COCOER 3381 LACISH 8363 NEWCC (WADA) 13T-MC5 PO WELL 2 468A
WEDGE
GATE
VALVE.
V-636
1 THRU 4
300-LB FLANGED CS/Y SGLIC WECGE ALL MONEL. ALCYCC 2217-M2S COOPER 1 30-SD-FF-CRYC LADISH 8375 NEWCO (WADA) 13F-M05 PACIFIC M-33 5 0--8 OR M-530-8 PACIFIC M --35 0-- E POWELL 2469A POWELL 2467
GATE
VALVE.
V-- 9 1 7 3 W A Y
l THRU 3
303-L3 FLANGED 3-WAY. 2 PORT, 90 DEGREE TURN TEFLON SLEEVEC TRANSFLOw PLUG VALVE. MONEL
8HL
PIPING SPEC U
FA4J80
1 1-20-7P
RTfMnft377
*1 6 8 0 1 0 1 *
PIPING SPEC U OATE 11-20-76 PAGE 4 CF 4
ITEM
SIZE
DESCRIPTION
BODY AND PLUG. DURCG MG431-AI-M0 45 OFFSET
V--6 09
1/2 THRU a
300-- LB FLANGEO HCRIZCNTAL SUING VALVE. ALL MONEL. EOLTEC CAP. ALOYCC 2377-M3S COOPER 330 LADISH 5372 NEWCO (W ADA 1 33F-MC5 PACIF IC M- 1 130 POWELL 2 34 8A POWELL 3061 A-- S TRIANGLE S-3842-RR
CHECK
N-213
PIPING SHALL BE INSTALLED IN ACCORDANCE WITH ENGR SPEC 47-110.
N- 1 0 0
INSTRUMENTATION
N- 1 0 1
THE FOLLOWING SPECIFICATIONS ARE TC EE USED FOR INSTRUMENTATION. FOR ITEMS NOT LISTED. THE PRECEDING PIPING SPECIFICATION IS TC BE USFD WHERE APPLICABLE.
PIPE
P-105
1/4 THRU 1/2
ASTM B-165 ANNEALED MCNEL SEAMLESS TUEING.
1/4 OD, 3/8 CD OR 1/2 00 BY 0.035 WALL. AS SPEC IF IED.
F I T TINGS
E = 90 DEG ELL. L=45 DEG ELL, T = T EE X = CROSS, R = R EDUC ER C = COUPLING. S == S TUB END. U --UN ION, FC = PIPE CAP
ELTR-105
1/4 THRU 3/8
MONEL SWAGELCK TUOING FITTINGS.
VAL VES
V -- 70 3
1/4
3000-LB MONEL NEEDLE VALVE, TEFLON 1/4 INCH MALE FIPE THREAC ENDS. DRAGON 3363T HOKE 3212 M-4M WHITEY 1VM4-M
PACKING,
4 ASTERISK BEFORE VALVE NUMBER INDICATES RESTRICTED VENDOR LIST.
BHL 11-20-7E
PIPING SPEC J
F A4 3 6 C
QTOAnP^7R