Document QX6jV60gyLKy1d225Rod7Q81o

Asbesto-CleneTM System 500 Asbesto-CleneTM System 600 ASBESTO-CLENETM SYSTEM 400 Designed to eccommodate a wide range of vehicles with drum brakes in the 7" to 12" diameter range, the Asbesto-CleneTM System 400 consists of brake encapsulation cylinder *400 and Nilfisk HEPAflltered model GA-71 vacuum dust collector. A single sleeve located at the rear of the cylinder enables the mechanic to reach In comfortably and complete the cleaning operation. A clear plastic window provides visual access to the drum being cleaned. The System 400 cylinder is mounted on a four-wheeled stand which simplifies its use with automobiles raised on portable jacks. Four separate filter stages are incorporated into the GA-71 dust collector. Asbestos and other dust is captured in a disposable paper bag which must be placed in a heavy plastic liner and marked according 1o OSHA standards. ASBESTO-CLENETM SYSTEM 500 Since many automobile brake jobs are performed while the vehicle is up on a lift, System 500 was developed. It is identical in every way to System 400 with the exception of the highlift jack. With the cylinder at eye level, the mechanic can work safely, comfortably and quickly. ASBESTO-CLENETM SYSTEM 600 Designed for use on the larger diameter drum brakes found on commercial vehicles with back plates in the 12" to 19" diameter range, the Asbesto-CleneTM System 600 consists of brake encapsulation cylinder *600 and Nilfisk HEPAfiltered model GA-73 vacuum dust collector. Two 6leeves allow access from either side and a third 6leeve is fitted into the center of the rear window. This third sleeve affords additional access when the System 600 is used on drum brakes of greater depth than standard, such as double-wheel as semblies. The System 600 cylinder is mounted on a fourwheeled stand which simplifies its use with vehicles raised on portable jacks. Three separate filter stages are incorporated into the GA-73 dust collector. Asbestos and other dust is captured in a heavy plastic liner, ready for marking according to OSHA standards. 8005 1613 PRODUCED BY FORD I