Document O30apxa3JNzmYJrD15rqKaEbw

Sh e r w in -Wil l ia ms Pa in t , Va r n is h a n d La c q u er La b o r a t o ^s ROUTINE AND POLICY ConwcuHv. No._ X2S3 Page 1 of March 25, 1971 Supersedes 9-2L-62 SUBJECT: LABELS - TEST SAKPIES PURPOSE: All test samples prepared by FV&L Laboratories and submitted to customers, other laboratories etc. must be identified by utilizing labels adopted and approved for this use by the Technical and Sales Departments. PROCEDURE: Test samples are normally filled into standard containers of the pint, quart or gallon size however occasionally glass or non-standard type containers are used. REDACTED FOR PRIVILEGE COMPANY IDENTIFICATION TEST SAMPIE PRODUCT OF THE SHEKWIN-TOLLIA*6 CO. RESEARCH AND DEVELOPMENT LABORATORIES _______?RCDPcx..am_________ PRODUCT: ASSIGNMENT: CUSTOMER: REDUCTT ON:_ A.U. OR BAKE: SEE LETTER: LABORATORY DATE 0007-SWP-0059258 PROCEDURE: REDACTED FOR PRIVILEGE Page 2 of 2 March 25, 1971 Supersedes 9-2U-62 All Test Sample Labels contain a pressure sensitive adhesive for ease of attaching to the container. It is suggested that information entered onto these labels be done with a typewriter and then pversprayed witha clear fast drying lacquer such as the aerosol Kem Hi Gloss Clear so as to prevent smudging or smearing of the typewritten entries. Identity of the various Test Sample Labels is as follows: Item Form No. Label For Pints Label For Quarts Label For Gallons Label For Glass Or NonStandard Containers 990759013 990759012: 990759016 39012 Stocks of the above are maintained at the North Olmsted Printing Division. Laboratories should order these by form number. 0007-SWP-0059259