Document O1JpboN0QK5mYOBjKXzmYZrbe

Car & Year APPLICATION CHART - continued Application Block or Head Size E-Z Size Part No. CHRYSLER 1965-66 1936-64 All All DESOTO 1930-61 All 1955-57 S25, S26 DODGE & DART 1965-66 1957-64 All V-8 All 6Cyl. FALCON 1960-66 1960-66 All All FORD 1954-66 1940-65 1954-64 1959-61 Ex. 8 Cyl. 260 & 289 6 Cyl. 292 430 Eng. INTL. TRUCK (IHC) 1960-66 266,304,345 1938-49 Red Diamond LINCOLN & MERCURY V-8 Comet 1960-66 Comet 1954-64 ECZ OLDSMOBILE 1966 All 1964-66 330V-8 1959-64 All 1941-63 All 1949-58 All PLYMOUTH & VALIANT 1965-66 1964-66 1933-63 V-8 All All PONTIAC 1955-66 1936-63 All All RAMBLER 1952-66 All All OHV STUDEBAKER 1951-64 ' All Some Use Block Block Block Block Block Block ' . Block Head Block Block Head Block Block Block Block Block Head Head Block Block Block Head Block Head Block Block Block Block Block Head Block Block 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 2-1/16 1 1-49/64 2-1/16 1-49/64 1-31/64 1-3/8 1-1/2 1-49/64 2-1/16 1 29/32 1-1/2 1-1/4 2-1/16 1-1/2 29/32 7/8 . 1-1/4 1-41/64 1-5/8 -1-5/8 * * 1-5/8. 1-5/8 1-5/8 .2 1 1-3/4 2 1-3/4 1-3/8 1-3/8 1-1/2 1-3/4 2 1 3/4 1-1/2 1-1/4 1 1-1/2 3/4 7/8 1-1/4 1-1/2 * 1-3/8 2-3/64 2 2 1-1/2 1-7/8 1-3/8 2 2 2 1-1/2 1-7/8 3-1023 3-1020 or 3-1021 3-1020 or 3-1021 3-1023 3-1023 3-1023 3-1026 3-1018 3-1024 3-1026 3-1024 3-1021 3-1021 3-1022 3-1024 3-1026 3-1018 3-1016 3-1022 3-1020 3-1026 3-1022 3-1016 3-1017 3-1020 3-1022 3-1020 or 3-1021 3-1021 3-1026 3-1026 3-1026 3-1022 3-1025 * NOTE: Chrysler and Plymouth, some use 1- 1/4 some 1-3/8. * NOTE: Installation: Don't use any sealer, tighten nut 2 or 3 complete turns. INSTALLATION INSTRUCTIONS 1. Make sure Washer & Nut are loose, plug will reduce to its normal diameter. 2. Washpr must be flush with side of block before and after Plug is installed. Neoprene must extend beyond inside of block to allow a ridge to form. 3. To properly set Plug, turn Nut clockwise until Washer becomes slightly distorted. DO NOT USE SEALER - INSTALL DRY BALKAMP, INC. Indianapolis, Indiana 46241 Printed in USA