Document NNvne35GzJgK0zLVVrenbaewp

I ll GLOSS W HITE HOUSE PAINT 0000-NLI-0000200 COMPOSITION OF PAINT BY WEIGHT PIGMENT 61.4% Basie Carbonate White Lead 60.0% Basic Silicate White Lead <48% PbO type) . . 60.0% Titanium Dioxide...............16.4% Zinc Oxide ...................26.7% Magnesium Silicate . . 28.2% > VEHICLE 38.6% Linseed Oil............................77.6% Liquid Drier......................... 6.0% Mineral Spirits................ 17.1% "Dute/l "Soy GLOSS WHITE (Suitable for Tint A House Paint...for a Durable White...for making Long-Lasting Tints Dutch Boy 111 Gloss White is a slow-chalking white house paint that can also be tinted to a variety of durable chalking characteristic offers advantages when used either as a white paint or as a color. Dutch Boy 111 Gloss Whit be used as the base when a tint is desired because it will retain color. FOLLOW DIRECTIONS -- STIR WELL Make sure the surface to be painted is clean and dry. Scrape or burn off all loose or scaling paint. Before painting, be certain the paint is well mixed. New, Unpointed Wood and Previously Painted Surfaces that are Badly W^Ared or in Poor Condition: Apply one coat of^^^KBoy 010 Primer. Allow at least three days of good dryir^^^^^pr^then apply one coat of the paint in this package Previously Painted Surface* In Good Con First apply one coat of this paint thinned with pentine per gallon. Allow five days of good then apply one coat of this paint just as receive without thinning. For very porous areas, raw also be added to the first coat, in amounts no pint per gallon. PAINTING HINTS Moisture getting behind tn^rant film may cause any paint to blister and peel. Seal cracks and other openings, repair leaky flashings, downspouts and roofs to prevent entrance of water. Ventilate areas where moisture condenses within the walls. Paint in good weather --not when it is damp, stormy or there is likelihood of a temperature drop to near freezing. Avoid painting in the late evening or in an intense sun. Apply a good full coat of paint, covering the surface thor oughly and evenly. Allow about one gallon for After first coat is dry, coat sappy knots with putty nailholes and similar defects. Stains from exposed copper, bronze or iron hardware, etc., which are not the fault of th minimized by coating such surfaces with Du Marine Spar Varnish or Screen Enamel. CAUTION-COMBUSTIBLE; CONTAINS LEAD. HARMFUL IF SWALLOWED. Keep away from heat a Do not apply on window sills, toys, furniture or interior surfaces of rooms which may be used by c prolonged contact with skin and breathing of vapor or spray mist. Close container after each u adequate ventilation. KEEP OUT OF THE REACH OF CHILDREN. 0000-NLI-000020017 NNATIONAL LEAD COMPANY PAINT DIVISION: NEW YORK, NEW YORK NLI