Document NGLkJXdzLXY2Y34z8gVRyQ3yR

Ethanolamines/Glycol Ethers Tier 3 Procedure Section Number Issue Number Original Date Date Title References :216 :1.3 : 12-23-91 Author: Mike Viator : 12-29-95 :Putting Hot Water Tracing On Ethanolamines Tanks :Glossary Of Equipment Identification (Text #114) 216 Putting Hot Water Tracing On Ethanolamines Tanks 1.0 Objective: 1.1 To put hot water tracing in service without damage to equipment or injury to personnel. 2.0 Responsibility: 2.1 It is the responsibility of the Operations Supervisor and Senior Operator Specialist to ensure that this procedure is fully complied with. 2.2 It is the responsibility of the Senior Operations Specialist and the Operations Specialist to ensure that this procedure is executed in a safe and efficient manner. 3.0 Special Notations: 3.1 If it becomes necessary to throttle the water on a tank jacket for any reason, always use the outlet valve. 4.0 Safety Notation: 4.1 The temperature of the condensate will very from winter to summer, but it will still be very hot regardless of the time of the year. 5.0 Procedure: 5.1 Open the inlet valve to the jacket. 5.2 Open the outlet bleed valve and bleed air from the jacket. 5.3 Once the air is evacuated from the jacket, close the bleed valve and open the outlet valve. 6.0 Revisions: Revision No.1 06-10-93 Yearly Review Revision No.2 12-20-94 Yearly Review Date Printed: April 18,1998 Paper Copies Of This Document Are Uncontrolled & Not Subject To Update. The Controlled Document Resides In File: Trace.Doc Page 1 Of 1 DO A 060112 confidential. Revision No.3 12-29-95 Yearly Review Date Printed: April 18, 1998 Paper Copies Of This Document Are Uncontrolled & Not Subject To Update The Controlled Document Resides In File. Trace Doc Page 2 Of 1 0<>0U3 DO COMF IDF-Nt1AL