Document NEe4GGmqXBMLBOXpO25Eb1ELp

FRICTION MATERIALS STANDARDS INSTITUTE 588 MONROE TURNPIKE, MONROE, CT 06468 AUTOMOTIVE DATA BOOK BULLETIN #5-981 FRONT FMSI NO. December 29, 1998 SYSTEM REAR F/R FMSI NO. CHEV TRUCK/GMC TRUCK Silverado 1500/Sierral500 1999 /D 7662-D792** (Notes #4 & #12) DODGE TRUCK (See Comments! 1999, Ram 1500 7659-D789** D/BH 2134BTT-S652 (Notes #1 & #9) 1999, Ram 2500 1999, Ram 3500 7260-D370** D/BH 2042BT-S655 OR 7339-D459** D/ 7339-D459** D/BH 2157AT-S656 HONDA 1999, Passport 1999, Prelude 1999, Odyssey 7585-D579** D/N 1503-S735* OR /D 7586-D580** 7382-D503** D/D 7418-D537** 7663-D793** D/ (Notes #5 & #13) INFINITI 1999, QX4 7566-D691** D/N 1433-S631* JEEP 1999, Grand Cherokee 1999, Cherokee 1998, Cherokee 1999, Wrangler 7660-D790** D/D 7661-D791** (Notes #2 & #10) (Notes #3 & #11) 7358-D712** D/BH 2176T-538 OR /BH 2174TT-S670* /BH 2174TT-S670* 7358-D712** D/BH 2176T-538 LEXUS 1999, RX300 7581-D707** D/D 7223-D325** MAZDA 1999, Protege 1999, Miata 1999, Millenia 1999, 626 1999, B2500 1999, B3000 1999, B4000 /N 1507-S739* (Notes #8 & #16) 7513-D635** D/D 7514-D636** 7520-D643** D/D 7521-D553** 7515-D637** D/N 1407-S667* OR 7624-D755 D/D 7464-D584** 7532-D652** D/BH 2185T-S704 OR /BH 2184T-S705 7532-D652** D/BH 2185T-S704 OR /BH 2184T-S705 7532-D652** D/BH 2185T-S704 OR /BH 2184T-S705 SEE DISCLAIMER AT END OF BULLETIN FMSI and FMS are registered trademarks of the Friction Materials Standards Institute, Inc. Copyright by Friction Materials Standards Institute, Inc. FMS118674 AUTOMOTIVE DATA BOOK BULLETIN #5-981 -2- FRONT FMSI NO. MERCURY (See Corrections 1 1999, Cougar 7645-D762** December 29, 1998 SYSTEM1 REAR F/R FMSI NO. D/D 7541-D661** OLDSMOBILE 1999, Alero 1999, Cutlass 1999, Bravada 7620-D752** D/D 7620-D752** D/N 7593-D726** D/D 7387-D698** 1496-S720 7596-D729** PLYMOUTH 1999, Breeze 1999, Neon 1999, voyager 7530A-D650 D/N 1481-S716* OR /D 7438B-D641 7597-D730** D/N 1473-S689* OR /D 7438-D759** 7470A-D642 D/N 1485ATT-S714 OR /D 7424-D751** PONTIAC 1999, Grand Am 7620-D752** D/D 7387-D698** TOYOTA 1999, Avalon 1999, Camry 1999, 1999, 1999, 1999, 1999, 1999, Camry Solara Corolla Sienna 4-Runner Land Cruiser RAV 4 7581-D707** D/D 7553-D672** 7441-D562** D/N 1447-587* OR 7581-D707** D/D 7223-D325** 7581-D707** D/D 7223-D325** 7611-D741** D/N 8105-597* 7615-D744** D/N 1500-S729* 7298-D611** D/N 1397-589* 7639-D772** D/D 7640-D773** 7441-D695** D/N 1447-587* VOLKSWAGEN 1999, Beetle 7635-D768** D/D 7335-D340** VOLVO 1999, S80 1998, V70 1998, V70 XC 1999, C70 7664-D794** (Notes #6 & #14) 7651-D783** 7651-D783** 7494-D618** D/D 7665-D795** (Notes #7 & #15 D/D 736-D31** D/D 736-D31** D/D 736-D31** 1999, S70 1999, V70 OR 7651-D783** D/ 7494-D618** D/D 736-D31** OR 7651-D783** D/ 7494-D618** D/D 736-D31** 1999, V70 XC OR 7651-D783** D / 7494-D618** D/D 736-D31** OR 7651-D783** D/ coHMiHIS The piston clips used on FMSI 7260-D370 and 7339-D459 for 1999 Dodge Truck Ram 2500 & 3500, are different than the piston clips used on prior years of Dodge Truck and GM Truck applications. FMSI 18675 AUTOMOTIVE DATA BOOK BULLETIN #5-981 -3- COMMENTS___ tcont'd) December 29, 1998 The piston clip used on FMSI 7659-D789 is different than the piston clip used on FMSI 7259-D369. CORRECTIONS In Bulletin #4-981 we noted that FMSI 7645-D778 assignment was canceled. After several comments from members and further review the shoe FMSI D778 remains canceled, however, lining assignment 7645 has been re-issued on shoe FMSI D762 FMSI 7630 and 7645 are dimensionally the same. The difference lies in the drilling for electric sensor. FMSI 7645 Ford p/n F8RZ-2001-DA has a drilled hole in the lining inside radius for an electric sensor. FMSI 7630 Ford p/n F8RZ-2001-BA is undrilled. DISC BRAKE LINING ASSIGNMENTS Note #1 7659 (D789) Dodge Track FMSI 7659 45.5 16.6 40.0 15.7 (1.79 .654 (1.57 .618 7659-D789 122.0 135.1 4.80) 5.32) 2 2 Integrally Molded Note #2 7660 (D790) Jeep FMSI 7660 52.5 17.8 (2.07 .700 7660-D790 140.2 5.52) 4 Integrally Molded Note #3 7661 (D791) Jeep FMSI 7661 40.4 16.8 (1.59 .661 7661-D791 92.7 3.65) 4 Integrally Molded Note #4 7662 (D792) Chev Track FMSI 7662 39.1 17.1 (1.54 .673 GMC Track 7662-D792 105.2 4.14) 4 Integrally Molded Note #5 7663 (D793) Honda FMSI 7663 53.3 17.0 (2.10 .669 7663-D793 127.0 5.00) 4 Integrally Molded FMS118676 AUTOMOTIVE DATA BOOK BULLETIN #5-981 -4- December 29, 1998 DISC BRAKE LINING ASSIGNMENTS (cont'd) Note #6 7664 (D794) Volvo FMSI 7664 57.8 17.6 57.8 17.8 (2.28 .693 (2.28 .701 7664-D794 111.8 111.8 4.40) 4.40) 2 2 Integrally Molded Note #7 7665 (D795) Volvo FMSI 7665 40.9 16.1 40.9 16.3 (1.61 .634 (1.61 .642 7665-D795 79.6 79.6 3.13) 3.13) 2 2 Integrally Molded DRUM BRAKE LINING ASSIGNMENTS Note#8 1507 (S739) Mazda 200.0 (7.87 FMSI 1507 33.5 3.7 1.32 .146 1507-S739 191.5 7.54) 4 Bonded DISC BRAKE SHOE ASSIGNMENTS Note #9 FMS D789 125.0 Plate 4.9 SHOE D789-I (4.92) (.193) 7659 Dodge Truck Piston clip free diameter 66.0 (2.60) Metal composite shims 0.9 (.035) thick Similar to FMSI D369-I except center lug location FMS D789 125.0 Plate 4.9 SHOE D789-0 (4.92) (. 193) 7659 Same as FMSI D369-0 Metal composite shims 0.9 (.035) thick Clips staked-on, sensors LH,RH and anti-rattle Dodge Truck Inner Outer FMS118677 AUTOMOTIVE DATA BOOK BULLETIN #5-981 -5- December 29, 1998 DISC BRAKE SHOE ASSIGNMENTS (cont'dl Note #10 FMS D790 192.5 Plate 6.1 SHOE D790-I (7.58) (.240) Jeep 7660 Metal composite shim 0.7 (.028) thick Two piston clips staked on 28.0 (1.10) free diameter FMS D790 194.6 Plate 6.1 SHOE D790-O (7.66) (.240) 7660 Metal composite shim 0.7 (.028) thick Sensors staked-on to make LH,RH Jeep - Inner - Outer Note #11 FMS D791 139.7 Plate 6.2 SHOE D791-I (5.50) (.244) 7661 Metal composite shim 0.7 (.028) thick Piston clip 26.4 (1.04) free diameter staked-on FMS D791 141.5 Plate 6.1 SHOE D791-0 (5.57) (.240) 7661 Metal composite shim 0.7 (.028) thick Jeep - inner L---2---J Jeep - Outer Note #12 FMS D792 142.5 Plate 6.2 SHOE D792 (5.61) (.244) 7662 Sensors staked-on 2LH.2RH ^--/ Chev Truck/GMC Truck FMSl 18678 AUTOMOTIVE DATA BOOK BULLETIN #5-981 -6- December 29, 1998 DISC BRAKE SHOE ASSIGNMENTS fcont'd) Note #14 FMS D794 155.2 Plate 5.5 SHOE D794-I (6.11) (.217) 7664 Metal composite shim 0.9 (.035) thick Piston clip staked-on 54.9 (2.16) free diameter Volvo FMS D794 156.5 Plate 5.5 SHOE D794-0 (6.16) (.217) 7664 Metal composite shim 0.9 (.035) thick Volvo - inner - Outer Note #15 FMS D795 122.7 Plate 5.1 SHOE D795-I (4.83) (.201) 7665 Metal composite shim 0.7 (.028) thick Piston clip staked-on 28.0 (1.10) free diameter Volvo - inner FMS D795 123.8 Plate 5.1 SHOE D795-0 (4.87) (.201) 7665 Metal composite shim 0.9 (.035) thick Volvo - Outer DRUM BRAKE SHOE ASSIGNMENTS Note #16 SHOE S739 1507 FMS S739 200 x 35 (7.87 x 1.32) Web 3.0 (.118) Mazda \o\ The data shown in this bulletin has been supplied by sources considered to be reliable. While we believe that such information is correct, the Institute cannot and does not accept any responsibiliy or liability for errors or omissions, or harm resulting therefrom. The data shown in this bulletin indicates dimensions only and in no way refers to quality of any materials that may be embodied in the product or particular application involved, and moreover, SINCE FIELD CONDITIONS AND OTHER FACTS MAY NECESSARILY VARY FROM ONE APPLICATION TO ANOTHER, FRICTION MATERIALS SUPPLIERS AND INSTALLERS SHOULD RELY ULTIMATELY AND SOLEY UPON THEIR OWN EXPERTISE AND JUDGMENT AS TO QUALITY AND DIMENSIONAL SIZE. Under no circumstances should replacement items be used when they do not appear to fit, nor be "forced" to lit, nor be modified in the field instead of obtaining a proper sized item from a supplier. If such items are modified in the field to fit, the Institute specifically disclaims all liability and responsibility for any harm resulting therefrom. If any error or omission is noted in this bulletin, it should be reported immediately to the Friction Materials Standards Institute Inc, 588 Monroe Turnpike, Monroe, Connecticut 06468. FMSI 18679