Document NEBE86NyM2XbMGr49en3RGKmR

^ / 3 s' f CRANE NET PRICE SCHEDULE SP2 SEPTEMBER 12, 1958 SPECIAL SERVICE VALVES AIR VENT, BACK PRESSURE, BLOW-OFF, DIAPHRAGM, PULP STOCK, RELIEF, SAFETY, STOP-CHECK, WATER DRAIN PRESSURE REGULATORS, TRAPS, SEPARATORS EXPANSION AND SWING JOINTS GAUGES, SIPHONS, TRY COCKS DRIP PAN ELBOWS, DRIP POCKETS ACCESSORIES BOLTING ON COMPANION FLANGES END FLANGE PROTECTORS This Net Price Schedule cancels Net Price Schedule SP1, June 30, 1958. CRANE CO. 836 S. Michigan Avenue Chicago 5, Illinois PRICES SUBJECT TO CHANGE WITHOUT NOTICE Printed in U.S.A. 'CO^t C O O O '^C O ^C O C O CONTENTS Special Service Valves p9 Gauges and Siphons p9 CO CO CO Air Vent or Water Drain................................... 7 Gauges, Liquid................... Back Pressure...................................................... 5 Gauges, Water.................. __ Blow-Off................................................................ 5 Siphons for Steam Gauges Diaphragm, Wheel-Operated.......................... 9 Diaphragm, Sliding Stem................................... 10 Accessories -- Pulp Stock.............................................................. 4 Composition Discs............... Relief.....................................................................5, 6 Chain Wheels and Guides. Safety................................................................... 5 Hydrant Clamps................. Thi Stop-Cheek, Ferrosteel........................................ 4 Hydrant Handles................ b Water Vent or Air Drain............................... 7 Keys, Lock Shield............... Keys, Street Washer.......... Specialties Wheels and Handles for Valves...................... 3, Drip Pan Elbows.................................................. 5 Wood Rod Couplings......................................... Tl, Drip Pockets.......................................................... 7 Wrenches for Cocks........................................... ^ Expansion Joints................................................... 7 Pressure Regulators............................................ 7 Bolting on Companion Flanges................. 11 ^ Separators............................................................ 7 Steam Traps.................. 7 Protectors N Swing Joints.......................................................... 8 For Ends of Fittings and Flanges...................... 12 Try Cocks..........................................;................. 8 For Ends of Valves.............................................. 12 NUMERICAL INDEX Figure No. Pag. Figure No. Page Figure No. Page Figure No. Page Figure No. Page Figure No. Page 07 7 730 8 1133 6 1620 9 2601 6 5615 10 Oil 7 731 8 113314 6 1620-KF 9 2602 6 5615-RN 10 013 7 734 8 1143 6 1620-RN 9 2604 6 1620-SB 9 2606 6 5620 10 28 E 4 850 3 1147 6 5620-KF 10 30 E 4 854 3 1155 V 6 1621 9 2611 6 5620-RN 10 40 5 856 3 1163 6 1621-KF 9 2612 6 5620-SB 10 860 3 1169 6 1621 -RN 9 2614 6 1621-SB 9 2651 6 5621 10 100 960 7 1425 4 2668 6 5621 -KF 10 976 7 1427 4 1630 9 2674 6 5621-RN 10 977 7 1429 4 1630-KF 9 5621-SB 10 300 8 986 7 1431 4 1630-RN 9 376 5 988 7 1447 4 1630-SB 9 4000 5630 10 384 5 5630-KF 10 385 5 988 Vi 7 1448 4 1631 9 5630-RN 10 390 5 989V4 7 1450 4 1631-KF 9 4387 5 5630-SB 10 391 5 990'A 7 1631-RN 9 4389 5 393 5 991 Vi 7 158614 8 1631-SB 9 5631 10 393 V2 5 994 D 7 5631-KF 10 398 7 1600 9 1650 9 5000 5631-RN 10 1600-KF 9 1651 9 5631-SB 10 400 7 1000 1600-RN 9 1652 9 401 7 1600-SB 9 5600 10 403 7 5600-KF 10 404 7 1100 5 1610 9 2000 5600-RN 10 9000 406 7 1102 5 I610-KF 9 5600-SB 10 420 7 1113 6 1610-RN 9 422 E 7 1113 LX 6 1610-SB 9 2500 5 5610 10 9810 7 2501 5 5610-KF 10 9811 7 610 8 1114 6 1611 9 5610-RN 10 9812 7 613 8 1118 6 1611-KF 9 2550 5 5610-SB 10 9813 7 615 8 1123 6 1611-RN 9 2551 5 616 8 1128 6 1611-SB 9 5611 10 9814 7 623 8 1130 6 2565 5 5611-KF 10 9820 7 624 8 1131 6 1615 9 2567 5 5611-RN 10 9821 7 625 8 A 1131 6 1615-RN 9 2568 5 5611-SB 10 Cotolog! Figure Page j No. September 12, 1958 CRANE 3 67 67 67 67 72 133 134 & 135 ACCESSORIES FOR BRASS AND IRON COCKS VALVE ACCESSORIES AND PARTS 850 Hydrant Clamps -- Discontinued 854 Wood Rod Coupling -- Discontinued 856 Street Washer Keys -- Discontinued 860 Hydrant Handle -- Discontinued Malleable iron Wrenches for Brass, Bronze and Iron Cocks: Square Head; Number: 1 -S 2-S 3-S 4-S .16 Number; 10-S 2.25 .17 11-S 3.05 .17 12-S 8.44 .25 Flat Head: Number: 1-F 2-F 3-F 4-F .16 .17 .17 .25 5-S 6-S 6'/j-S 7-S 7'/j-S 8-S 9-S .30 .40 .47 .61 .76 .90 1.45 5-F 6-F 7-F 8-F 23-F 24-F 25-F .30 .40 .61 .90 .82 1.06 1.45 Square Head, for Nos. 319 and 339 Cocks only: Number: 1 -M 2-M 3.M .55 .67 .78 4-M 1.01 5-M 6-M 1.35 2.70 Composition Discs -- Net per 100 pieces: Valve Size: VkK '/4' y.' */2' V*" 1'" !'/' \'h" 2" 2</a' 3" No. 1 Cranife No. 4 Cranite No. 6 No. 10 No. 12 17,13 48.92 17.13 6.84 6.84 17.13 48.92 17.13 6.84 6.84 17.30 55.78 17.30 7.82 7.82 17.61 55.78 17.61 7.82 7.82 21.53 63.60 21.53 10.28 10.28 22.50 80.24 22.50 13.21 13.21 30.83 116.46 30.83 18.60 18.60 38.65 55.29 161.48 248.57 38.65 55.29 23.96 37.19 23.96 37.19 72.41 326.85 72.41 175.16 460.93 175.16 Valve Size: 3 Yi" 4' 5' 6' No. 1 Cranite No. 6 230,96 237.79 319.02 362.08 230.96 237.79 319.02 362.08 Wheels and Handles for Valves; Wheels: r 2'A" 2,/i' 3' 3'/j' 4' 4VS' 5' 5'A" Style A: - Square Hole .22 .30 .42 .61 1.14 Threaded Hole .43 .49 .74 1.02 1.72 Style B .30 .38 .43 .49 1.02 Style D .48 .79 1.45 6" 7" 8' 9' 10' 12' 14" 16' 18' Style D Style E: Hexagon Hole Threaded Hole 1.72 1.72 2.00 2.15 2.15 2.69 2.69 2.69 3.40 3.40 3.62 3.62 4.73 4.73 6.79 6.79 13.74 15.11 13.74 15.11 20' 22' 24' 27' 30' 36' 42' Style D 20.50 24.81 42.07 Style E, Hexagon Hole 20.50 24.81 42.07 45.32 62.59 172.61 215.78 45.32 62.59 172.61 215.78 X---Discontinued 4 ( Catalog t Page Figure No. 134 & 135 ! 1 i i i i i i j i 136 137 September 12, 1958 CRANE ACCESSORIES FOR BRASS AND IRON COCKS VALVE ACCESSORIES AND PARTS - Continued - Wheels and Handles for Valves, Continued: Wheels: u-r i?r Style F .14 .14 21C .17 2W .22 2H" .25 3J4b" .30 354" .39 4ks" .47 434" .61 53*" .79 Style L i H" .22 2" 2)4" .24 .25 2)4" .29 234"' .35 3' .43 Style M 35i" .86 35*" 1.08 3 H" 1.30 4 34" 1.72 4%" 2.04 534" 2.37 6%" 4.64 Handles: Style K 3)4" 3%" 3 Vi' m" 4a- 434" 5" 534' .35 .42 .43 .45 .49 .53 .65 .75 Style S 3V 414" 4)4" 434" .16 .22 .42 .47 .49 6" .67 7' .75 3" 3 34" 434" 6' 7" Style X .43 .53 .67 1.08 1.19 Chain Wheels and Chain: Chain Wheel Only Chain Wheel and Guide m 4.04 18.87 3" 4.32 19.15 4" 5" 7H" 4.58 5.11 9.17 19.43 21.03 25.35 Per Foot Each 10" 13.48 30.73 14" 19.43 37.77 18" 28.05 47.46 24' 30" 48.54 102.48 70.13 134.86 Chain for Chain Wheel Connecting Ends of Chain, Including Labor .48 .69 Keys for Lock Shield: No. 197 1.31 No. 198 1.56 No. 199 2.10 Cir. AD-2156 303 PULP STOCK, STOP-CHECK, BLOW-OFF AND BACK PRESSURE VALVES 1425 1429 1427 1431 1447 1448 1450 28E 30E Pulp Stock Valves, Flanged: Iron Body, Brass Trimmed: Outside Screw and Yoke Quick-Opening 4" 6' 8' 168.05 206.57 281.62 188.99 232.93 317.39 3% Nickel Iron Body, Exelioy Disc: Outside Screw and Yoke 185.28 228.55 308.46 Quick-Opening 202.51 249.90 331.78 3% Nickel Iron Body, 18-8SMo Disc Unlined 221.64 269.46 363.51 Rubber Lined 459.91 568.56 761.16 18*85Mo Body and Disc 255.20 356.46 487.34 10' 12' 14" 16" 18' 20" 24' 366.58 464.92 585.62 740.96 1000.06 1572.85 2227.43 411.27 518.57 657.14 822.54 395.56 509.62 639.27 822.12 1096.16 1727.40 2466.36 430.88 542.91 685.10 861.76 474.31 617.73 780.05 992.03 1316.65 2074.16 2939.88 981.231237.97 1568.122081.60 2671.98 3685.46 5297.86 589.71 825.63 1053.591440.77 250-Pound Ferrosteel Stop-Check Valves, Flanged: 2 'h' 2" 4' 5' 6' 8' 10' Straight-Way Y-Pattem Angle, Y-Pattem 148.54 168.08 201.18 272.74 325.20 559.47 929.46 148.54 165.25 201.18 268.21 323.66 562.12 920.78 X--Discontinued ! Catalog: Page , Figure No. i 1 September 12, 1958 CRANE PULP STOCK, STOP-CHECK, BLOW-OFF, AND BACK PRESSURE VALVES - Continued - 308 | 310 310 j I j 250*Pound Ferrosteel Blow-Off Valves: 1 Vi' 2" 2Vi" 390 391 393 393V4 Angle Pattern, Screwed 41.41 Angle Pattern, Flanged 44.96 Y-Pattem, Screwed 41.41 Y-Pattem, Flanged 45.39 Replacement Parts--Prices on application. 48.04 52.79 48.04 52.79 59.63 65.50 59.63 65.50 Iron Body Back Pressure Valves: 2" 2 Vi" 3' 4' 5' 6' 8' 384 Screwed 385 Flanged 43.55 51.07 59.14 111.45 158.36 184.96 319.13 4387 & ' Iron Body Relief and Back Pressure Valves, Spring Loaded -- Discontinued 4389 i 320 & , 321 | 322 & 323 323 325 325 325 SAFETY AND RELIEF VALVES AND DRIP PAN ELBOWS 2500 2501 2550 2551 2567 2568 2565 1102 Brass Pop Safety Valves: For Saturated Steam: Top Outlet Side Outlet For Air and Gas: Top Outlet Side Outlet Vt" 14.36 15.32 W 14.36 15.32 15.83 17.01 1" 18.54 20.40 !'/<' 21.54 24.95 l'/j" 26.64 30 hi 2" 36.74 43.07 2Zl" 56.68 65.73 17.00 17.00 18.54 22.04 25,62 30.93 42.49 62.94 17.96 17.96 19.72 23.90 29.03 34.91 48.83 69.89 Low Pressure Pop Safety Valves for Steam Heating Boilers: r VA' Iron Body: Top Discharge Side Outlet 5.99 6.78 6.78 7.98 7.98 Brass Body Discontinued VA' 9.57 9.57 12.77 12.77 2'/j' 21.54 28.33 Iron Body Pop Safety Valve for Air and Gas: 2Zi' 162.50 187.77 270.77 40 376 1100 Brass Body Lever and Weight Safety Valves: With Lever and Weight: V*` For 41 to 100 Pounds 10.70 For 15 to 40 Pounds 10 JO Without Lever and Weight 7.67 V%` 10.80 10 0 7.79 Iron Body Lever and Weight Safety Valves: With Lever and Weight: For 31 to 100 Pounds For 15 to 30 Pounds T/4' 17.66 17.59 Without Lever ond Weight 11.50 IVi' 20.41 18.60 13.48 Cast Iron Drip Pan Elbow: 2Zi" 9.70 10.59 Vi' 1170 11.57 9.49 27.46 2377 16.98 11.91 V*' 14.01 13.90 11.57 2Zi' 44.08 34.19 2676 3Zi' 13.68 T 15.30 15X15 12.36 5776 43.34 33.27 4' 15.88 95.71 77.42 53.38 19.87 28.70 5 X--Discontinued 6 Catalog j Figure Page I No. September 12, 1958 CRANE 326 327 to 330 Not lllus. Not lllus. Not lllus. Cir. AD-2311 Cir. AD-2311 331 331 & 332 333 SAFETY AND RELIEF VALVES AND DRIP PAN ELBOWS - Continued - 1131 A1131 1133 1133% 1155V 2606 2601 2602 2604 2611 2612 2614 2651 2668 2674 1128 1130 1143 1147 1163 1169 Brass Relief Valves: 3/a" Vi" 1" For Hot Water For Air For Steam For Cold Water 9.82 7.93 10.92 7.93 7.93 9.63 13.10 9.63 9.63 13.94 Brass Relief Valves: w %' r 1V4' 1%" 2" 2%' 3' For Vacuum' For Water Heaters For Steam For Water, or Oil: Male Inlet, With Wheel Female Inlet, With Cap For Liquid Service: Mole Inlet, With Cap Male Inlet, With Wheel Female Inlet, With Cap For Air or Gas: 250-Pound 300-Pound 500-Pound Hydraulic: For 300 to 600 Pounds For Pressures as Listed 14.16 18.04 15.83 14.16 Discontinued Discontinued 12.71 12.53 12.71 12.53 12.71 16.07 17.34 16.07 17.34 18.83 28.90 66.64 Brass Pressure-Temperature Relief Valves: 18.04 18.68 17.01 15.11 14.73 15.11 17.44 19.10 20.49 31.05 66.64 19.69 22.53 20.40 24.63 27.37 24.95 32.55 33.83 30.62 49.71 45.35 19.92 19.27 19.92 23.77 22.66 23.77 29.88 28.34 29.88 43.76 41.95 43.76 60.27 102.60 21.13 23.17 24.97 24.33 26.53 28.67 30.78 33.54 36.28 42.32 46.81 50.03 37.52 43.12 53.90 75.45 71.68 110.84 117.86 169.75 Vi" Male Inlet Vx" Female Outlet Va" Male Inlet Vx" Female Outlet Fusible Plug Type, Non-Adjustable, set at 5C , 75,10C , or 125 psi Thermal Element Type, Non-Adjustable, set at 50, 75, 100, or 25 psi Fusible Plug Type, Adjustable, set at 125 p$ 1.82 2.32 Brass Pressure Relief Valve, Spring-Loaded Disc, Non-Adjustable, set at 50, 75,100, or 125 psi: %" Male Inlet Vx" Female Outlet 2.10 4.81 2.48 W Male Inlet Vx" Female Outlet 1.76 1.98 1118 1123 1113 1114 11131.X All-Iron Relief Valve, For Ammonia, Air, or Gas: Vi" %' 1' VA' 1 Vi V 41.14 43.41 52.05 61.97 90.45 110.47 Iron Body Relief Valves: 2* 2%' 3' 4' Inside Spring, For Water or Oil Outside Spring, For Steam, Gas, Hot Water, or OH: Flanged Inlet, Flanged Outlet Flanged Inlet, Screwed Outlet 91.30 107.52 160.55 376.28 159.90 213.54 253.98 Carbon Cast Steel Outside Spring Relief Valve: 2' 2Vi" 3' 4' 226.86 277.11 336.22 529.83 X--Disconlinued Catalog I Figure Page j No. September 12, 1958 CRANE 7 PRESSURE REGULATORS, AIR VENTS, STEAM TRAPS, EXPANSION JOINTS, SEPARATORS, AND DRIP POCKETS 337 ; 960 Bronze Pressure Regulator: 16' 1" \'A" 116' 2" 82.19 91.42 102.50 127.43 157.90 198.54 343 Air Vent or Water Drain Valves, Ball Float Type: Number: 976 977 24.53 31.37 346 Inverted Open Float Steam Traps; Number; 9810 9811 9812 9813 9814 9820 9821 12.27 21.98 21.98 35.04 52.29 34.10 59.12 350 398 400 401 403 404 406 354 07,011 8. 013 355 420 & 422E 125-Pound Expansion Joints: Iron Body: Screwed: Std. Traverse 6-inch Traverse Flanged: Std. Traverse 6-inch Traverse Vh" 20.27 26.84 27.35 33.94 2" 216' 21.79 25.32 29.38 34.44 29.88 35.47 37.47 44.57 Brass, Screwed: Standard Traverse 6-inch Traverse 16' %" r 4.06 5.97 7.06 11.95 13.58 Steam and Oil Separators, Flanged -- Discontinued 3" 32.92 47.10 45.08 59.26 116' 9.23 16.83 316' 46.11 62.82 I'/z' 11.40 20.11 4' 5' 6" 8' 10' 12' 53.70 75.98 72.43 94.22 109.41 136.76 187.41 273.53 94.72 118.53 139.81 2' 2'/j" 3" 20.11 32.59 59.76 30.98 Cast Iron Drip Pockets, Flanged -- Discontinued 356 98816 990 'h 98916 991 16 994D 357 986 & 988 Y-Pattem Sediment Separators: Iron Body: 125-Pound Screwed 250-Pound Screwed 16' 3.70 %' 3.70 Vz" 4.25 4.80 %' 4.89 5.54 r 5.91 6.65 116' 7.39 8.32 116" 9.42 10.44 2' 216' 18.02 22.17 19.87 2' 216' 3' 4' 5' 6' 8' 10" 12' 125-Pound Flanged 250-Pound Flanged 25.86 31.41 40.65 81.75 112.69 164.42 224.46 420.28 On App 30.03 36.04 47.11 94.22 141.33 205.99 Steel: 600-Pound Screwed 16' %' 1' 116' 15.86 22.91 29.06 38.77 Iron Body Sediment Separators -- Discontinued X--Discontinued 8 September 12f 1958 Catalog Page j Figure No. 1 j i CRANE WATER GAUGES AND ACCESSORIES, TRY COCKS, AND SWING JOINTS 360 Brass Water Gauges: Each Add For Each Inch Up To 36" 610 '/2-inch, 175-Pound, 14" or Shorter Centers 610 %-inch, 175-Pound, 18" or Shorter Centers 613 %-inch, 250-Pound, 18" or Shorter Centers 615 %-inch, 250-Pound, 18" or Shorter Centers 616 '/2-inch, 250-Pound, 14* or Shorter Centers 624 '/2-inch, 100-Pound, 14" or Shorter Centers 625 '/2-?nch, 100-Pound, 8" or Shorter Centers 623 !/2-inch, 13 Vi" Centers 14.26 21.13 28.51 47.51 16.88 7.81 7.81 .09 J09 .12 .12 .09 .09 .09 Prices on Application 361 Siphons for Steam Gauges Each Straight Pattern: Brass Steel 1.81 .98 Angle Pattern, Steel .98 361 Extra Brass Guards for Water Gauges: Length: 9" 11" 13" 14" 15' 17' 19' 21' .30 .30 30 34 .38 .42 M 50 length: 23" 25" 27" 29' 31* 33' 35" .56 .63 .69 .76 .84 .92 1.12 361 Brass Try Cocks: 730 125-Pound 731 Low Pressure 734 250-Pound 361 300 Brass Swing Joints: y8" 3.27 2.74 3.69 Zi 3.38 4.02 %' 4.44 !4" 458 %" 4.80 A" 552 %' 854 T 12.50 413 1586Vi All-Iron Liquid Gauge: Complete, with 15-inch Centers, Each Parts: Upper or Lower Valve Only, Each: Gauge Glass Only %>inch O. D., 15-inch Centers, Each Guard Only, 15-inch Centers, Each Rubber Gauge Glass Gaskets Onfy, Each Flat Steel Gauge Glass Washers Only, Each Steel StufFing Box Washers Only, Each Vz* or 41.80 19.20 J 2.71 .04 .09 .09 For Each Inch Over 15-inches up to 24-inches, Add: .61 X--Discontinued CatalogI Figure Page ; No. September 12, 1958 CRANE 9 DIAPHRAGM VALVES--WHEEL OPERATED Cir. i AD-1942 j 1600, 1600-SB, 1600-RN 1610, 1610-SB, 1610-RN 1611, 1611-SB, 1611-RN 1620, 1620-SB, 1620-RN 1621, 1621-SB, 1621-RN 1630, 1630-SB, 1630-RN 1631, 1631-SB, 1631-RN 1600-KF 1610-KF 1611-KF 1620-KF 1621-KF 1630-KF 1631-KF 1650 1651 1652 1615, 1615-RN Y-Pattern Diaphragm Valves: 'hn %" r i '/* i 'A' r vh' 3" 4' 6" Wheel Operated Valves: With Neoprene, Buna N (SB), or Natural Rubber (RN) Diaphragm and Disc Insert: Brass Body, Screwed 15.23 16.55 19.22 23.95 33.61 5143 Iron Body, Screwed 4.43 5.47 6.35 10.12 1737 22.83 Iron Body, Flanged 8.13 9.17 12.78 16.71 22.91 31.04 43.60 52.47 79.08 181.26 Aluminum Body, Screwed 13.89 14.48 16.55 20.46 28.31 38.43 Aluminum Body, Flanged 20.25 21.43 24.68 29.25 39.15 52.16 72.05 85.20 141.89 252.72 18-8 Mo Body, Screwed 17.44 18.03 26.01 32.00 45.89 71.16 18-8 Mo Body, Flanged 3245 33.55 45.68 53.94 69.70 101.00 129.17 184.74 305.56 529.08 With Kel-F Diaphragm and Disc Insert: Brass Body, Screwed 30.37 Iron Body, Screwed 19.58 Iron Body, Flanged Aluminum Body, Screwed Aluminum Body, Flanged 23.28 29.05 35.40 18-8 Mo Body, Screwed 18-8 Mo Body, Flanged 32.59 47.59 Iron Body, Neoprene Diaphragm and Disc Insert; For Vacuum: Screwed Flanged 4.43 8.13 For Oxygen or Acetylene: Screwed 4.80 Iron Body -- Lined with Neoprene or Hard Natural Rubber (RN): Flanged 33.03 33.47 22.39 26.08 31.41 38.36 34.95 50.47 5.47 9.17 5.84 34.14 41.38 28.52 34.95 38.73 46.85 48.17 67.85 6.35 12.78 6.72 37.92 50.77 37.09 43.67 4743 56 23 58.98 80.92 65.40 48.84 5437 60.08 7054 77.67 10146 86.23 5733 65.85 73.23 86.97 105.97 135.82 85.34 113.80 170.92 110.10 142.84 242.37 154.08 216.89 380 55 288.05 357.28 633.64 10.12 17.07 22.83 16.71 22.91 31.04 4330 52.47 79.08 181.26 1036 1731 23.28 4330 48.03 59.34 82.17 108.63 151 48 302.97 X--Discontinued 10 Catalog < Figure Page 1 No. September 12, 1958 CRANE DIAPHRAGM VALVES--SLIDING STEM Cir.: AD-1942, 5600, 5600-SB, 5600-RN 5610, 5610-SB, 5610-RN 5611, 5611-SB, 5611-RN 5620, 5620-SB, 5620-RN 5621, 5621-SB, 5621-RN 5630, 5630-SB, 5630-RN 5631, 5631-SB, 5631-RN 5600-KF 5610-KF 5611-KF 5620-KF 5621-KF 5630-KF 5631-KF 5615, 5615-RN Y-Pattern Diaphragm Valves: y2" Sliding Stem Valves: With Neoprene# Buna N (SB)# or Natural Rubber (RN) Diaphragm and Disc Insert: Brass Body, Screwed 27.49 30.00 Iron Body# Screwed 16.71 18.91 Iron Body, Flanged 20.40 22.61 Aluminum Body, Screwed 26.17 27.93 Aluminum Body, Flanged 32.51 34.88 18-8 Mo Body, Screwed 29.70 31.48 18-8 Mo Body, Flanged 44.70 46.99 With Kel-F Diaphragm and Disc Insert: Brass Body. Screwed Iron Body, Screwed Iron Body, Flanged Aluminum Body, Screwed Aluminum Body, Flanged 18-8 Mo Body, Screwed 18-8 Mo Body, Flanged 42.63 31.85 35.54 41.31 47.67 44.85 59.86 Iron Body -- Lined with Neoprene 45.30 or Hard Natural Rubber (RN), Flanged 46.92 35.85 39.53 44.85 51.81 48.39 63.91 47.59 r V/a" m' 2' 2/2' 3" V 6" 35.40 39.97 53.21 73.75 22.53 26.30 36.65 45.14 28.96 32.89 42.49 53.35 71.83 82.91 116.75 216.36 32.75 36.65 47.89 60.74 40.87 45.44 58.75 74.50 100.26 115.64 179.56 287.83 42.19 48.17 65.47 93.47 61.85 70.14 89.27 123.33 157.38 215.18 343.25 564.19 57.57 44.70 51.12 54.92 63.03 64.35 84.01 54.08 66.95 53.28 59.86 63.62 72.41 75.14 97.10 59.78 84.98 68.43 74.26 79.65 90.52 97.25 121.04 67.61 108.55 79.94 88.17 95.56 109.29 128.27 158.13 81.65 113.57 140.54 142.02 173.29 199.15 272.81 110.40 139.06 191.76 254.57 418.25 189.17 320.93 * 392.39 668.75 338.07 X--Discontinued ^Change in Price September 12, 1958 Bolting On Companion Flanges 11 Size Inches 'A % 1 m VA 2 2'A 3 3 'A 4 5 6 8 10 12 14 16 18 20 24 The following table indicates the proper schedule of prices to be used when determining the labor charges for bolting flanges to various pressure classes of valves and fittings 25 and 125-Pound Iron 150-Pound Steel 150-Pound Brass Pressure Class 175 and 250-Pound Ferrosteel 400 and 500-Pound W.O.G. Ferrosteel 300 and 400-Pound Steel 250 and 300-Pound Brass and Bronze 800-Pound Hydraulic Ferrosteel 800-Pound. W.O.G. Ferrosteel 600-Pound Steel 900-Pound 1500-Pound Steel Steel AA A A BB B B B C C C C D D CD EE D ED EFF Size Inches 'A % 1 1 Va 1A 2 2'/2 3 3'/2 4 5 6 8 10 12 14 16 18 20 24 Schedule of Net Prices Covering Labor Only For Bolting Companion Flanges to Valves and Fittings Not Including Bolts and Gaskets Schedule A Schedule B Schedule C Schedule D Schedule E Schedule F With Two End Flanges 1.13 1.79 2.44 3.00 3.64 4.22 Net Prices, Each For Valve or Fitting With Three End Flanges 1.79 2.51 3.39 4.22 5.10 5.90 With Four End Flanges 2.44 3.39 4.38 5.59 6.89 8.10 12 September 12, 1958 Protectors for Ends of Valves, Fittings, and Flanges The following schedule, subject to change without notice, is Crane stand ard practice for protecting the ends of valves, fittings, and flanges. Screwed End Valves -- Not Fabricated The following lines are furnished with protectors as outlined below: All screwed valves that are regularly or specially air tested. All screwed cast and forged steel valves. Tin plugs for female ends, sizes 4" and smaller. Sheet rubber discs for female ends, sizes larger than 4". Sheet iron bands, half couplings, or regular thread pro tectors (as conditions warrant) for male ends, all sizes. No charge is made for protectors on valves mentioned above. Ammonia Valve*, Flanged Fittings, and Flanges Screwed and flanged ammonia valves, being regularly air tested, are furnished with tin plug, rubber disc, or wooden protectors. Flanged ammonia fittings are furnished with wooden pro tectors. No charge is made for these protectors. Ammonia flanges are not furnished with protectors. Flanged End Valves, Flanged Fittings, and Companion Flanges -- Not Fabricated The following lines are furnished with protectors as outlined below: All flanged valves that are regularly or specially air tested. All flanged cast and forged steel valves. All flanged steel fittings; All steel flanges. Wood protectors for general use and for regular Cranelap faces. Sheet steel plates for export use. Cast steel protectors for special Cranelap faces (male, female, tongue, groove, or ring joint). On the products mentioned above-- (a) No charge is made for the wood protectors. (b) No charge is made for the sheet steel plates on export ship ments. (c) When cast steel protectors are furnished for special Cranelap faces, they are charged extra. However, credit will be allowed for these protectors, if and when returned after having received approval for so doing. Fabricated Piping, Bends, Etc. All fabricated piping and bends are furnished with pro tectors on screwed as well as flanged ends as outlined in the foregoing schedules. No direct extra charges are made for protectors since they are included in the quoted prices on fabricated /obs. However, credit will be allowed on steel and wooden flange protectors, if and when returned to us after having received approval for so doing. Flange Protectors on Regular Lines of Iron or Ferrosteel Valves and Fittings When possible to ship valves and fittings with companion flanges bolted on, or to ship flanges bolted together, there is no need for further protection except that a cardboard will be inserted between the end flanges of valves and fittings and the companion flange. When cast iron or ferrosteel flanged valves and fittings other than as noted on this page are shipped with end flanges protected by wooden flange protectors, an extra charge, per the following schedule, will be made. However, credit will be allowed for these protectors, if and when returned after having received approval for so doing. Size Inches 1 1V* V/2 2 2'/z 3 3'/z 4 5 6 8 10 12 14 16 18 20 24 Net Prices, Each Valves and Fittings All Pressure Classes up to 250-Pound (Including 800-Pound Hydraulic) With Two End Flanges With Three End Flanges With Four End Flanges 1.22 1.22 1.22 1.22 1.22 1.53 1.53 1.53 1.53 1.53 1.70 1.94 1.94 2.19 2.51 2.51 2.85 2.85 1.70 1.70 1.70 1.70 1.70 2.10 2.10 2.10 2.10 2.10 2.51 2.92 2.92 3.32 3.73 3.73 4.14 4.14 2.19 2.19 2.19 2.19 2.19 2.85 2.85 2.85 2.85 2.85 3.32 3.89 3.89 4.45 4.95 4.95 5.51 5.51 SP 3739