Document N26jaN15jQM8OJ1VkebOvaGQR

Air Flow Regulators Young Regulator Company Department G 4500 Euclid Avenue, Cleveland, Ohio Representatives in Principal Cities THE "YOUNG" REMOTE CONTROL SYSTEM To Individually Control Volume of Air This practical device is particularly adaptable for hotels, office buildings, residences, public buildings and other buildings to manually control a damper or register at a remote distance up to 100 ft or more. The damper or register is connected to the regulator by a stain less steel cable encased in control casing. We recommend that it be placed in a in. copper tubing. Knob sets damper or register at any' desired position. Knob is on a 2% in. by 5 in. escutcheon. The indicator shows position of damper or register. The damper or register operates by pulling on the cable. The stainless steel spring closes the damper or register and returns the cable when the indicator passes the "on** position. Patents Pending Fastening Remote Control Regulator to Butterfly Damper THE "YOUNG" REGULATOR The "YOUNG" Damper Regulator is made in % in. size only and has five important features: (1) It locks secure ly. (2) It is temper-proof. (3) It gives positive action. (4) It is ornamental,--can be placed on partition walls. (5) It is adjusted and locked with a polygonal wrench or key. THE "YOUNG" VALCALOX REGULATOR AND THE "YOUNG" FLUSH CUP REGULATOR The "YOUNG" VALCALOX Regulator can be placed on partition wall or any location of duct. Adjusted and locked with a special wrench. It is much cheaper than the "YOUNG" Regulator. The "YOUNG" Flush Cup Regulator is used where regulator must be flush with the wall and is operated S8KKS (3 with a special wrench. We can also supply a concealed type regulator on which the plate must be removed in order to operate. 934 International Heating & Ventilating Exposition THE AIR CONDITIONING EXPOSITION Permanent Address-Grand Central Palace, New York, N. Y. EXPOSITIONS HELD The first in Philadelphia, 1930. The second in Cleveland, 1932. The third in New York, 1934. The fourth in Chicago, 1936. The fifth in New York, 1938. Subsequent Expositions will be held on alternate, even numbered years. The next one will be Cleveland, January 22 to 26, 1940. These are held coincident with the Annual Meeting of the American Society of Heating and Ventilating Engineers and are directed by the International Exposition Company, under the auspices of the A.S.H.V.E. EXHIBITORS Comprise leading firms in each phase of the industry: number has varied from 160 to 327 exhibitors. EXHIBITS These range from and comprise all the types of articles discussed or advertised in this copy of The A.S.H.V.E. Guide. 1. The Combustion Group: Furnaces, burners (coal, oil and gas), grates, stokers, boilers, radiators (vari ous types), refractories and auxiliaries. 2. The Oil Burner Group. 3. The Hydraulic Group: Water feeders, water heaters, pumps, traps, valves, piping, fittings, expan sion joints, pipe hangers, etc. 4. The Steam Heating Group: Vapor heating and steam specialties. 5. The Hot Water Heating Group. 6. The Air Group: Warm Air furnaces and stoves, regis ters and grilles, cooling towers, air filters, motors, fans, blowers, condi tioning equipment, ventilators (room and industrial types), unit heaters, etc. 7. The Air Conditioning Group: Equipment which circulates and filters the air, in summer dehumidifies and cools; in winter heats and humidifies, and does all these in proper season for complete, all year round air condi tioning. 8. The Control Group: Instruments of precision for indicating, controlling or recording temperature, pressure, volume, time, flow, draft or any other function to be measured. 9. The Refrigerating Group: Compressors, condensers, cooling ap paratus, contingent apparatus and refrigerants. 10. The Central Heating Group: Apparatus and materials especially designed or adapted to the uses of central heating and central heating station supplies. 11. The Insulating Group: Structural insulators (refractory and cellulose materials), asbestos, mag nesia clays and combinations thereof, pipe and conduit covering, etc., weather-stripping, etc. 12. The Miscellaneous Group: Electric Heaters, boiler and pipe re pair alloys, liquids and compounds, tools of all kinds, and equipment not specifically included in the above groups, but related thereto. 13. The Machinery and General Equipment Group. 14. Books and Publications. VISITOR ATTENDANCE Comprises a registered attendance in vited to the exposition and includes: (Figures are 1936 analysis) Industries Governmental____ ___________________ 404 Distributional Channels Contractors. Dealers, Jobbers. Supply Houses, 32 classifications................... 7701 Home Owners____ ______________ .______ ____ 474 Industrial Users, 49 classifications___________10,791 Professional and Service Organizations, 23 classifications___________ 2095 Public Utilities___ _:_____________ ___________ 1459 Real Estate Management and . Operation, 10 classifications...... ,,.......... .......... *__...____ 1418 Educational Institutions 1935 Miscellaneous__________ 1466 Total._______________________________27,743 Occupations Executive (44 titles)..12,437 Construction (16 titles and trades)-___ :____ 2606 Operation (44 titles and trades) 4316 Technical (64 titles)._______________________ 4477 Not Classified including Educators, Pub lishers. Horae Owners, etc. 3907 Total^__________________________ 27,743 The registered attendance at the 1938 Exposition in New York was nearly 40,000, but the analysis of industries and.occupa tions has not been completed at the time this goes to press. Industrial Expositions in America lead the expositions of the world in style, business effectiveness, industrial influence and educational value. This Exposition stands among the leaders in Industrial Expositions in America. It is an edu cational institution which biennially brings together the research developments and improvements in equipment and materials for use in heating, ventilating and air conditioning all types of buildings.