Document MgdL4yj51Qxq4J7aRaw39EEj

ASBESTOS SG 210 June 20, 1972 RM Spec. No. 18 NEW PLAINTIFF'S EXHIBIT DESCRIPTION: - Short fibered grit free asbestos USE: - Ingredient in joint compounds SOURCE: Union Carbide Corp. SPECIFICATIONS GRIT - Should be free from gritty parti, .es. Test for grit is made by decantation with water, . >ing a 25 gm sample and an 800 or a 1000 cc beaker. Not lei than 750 cc of water shall be used for the first washing, s< that any grit present will settle freely and not be held in suspension. 0.1% fine grit permitted. FINENESS: - U.S. Sieve Series Through 8 mesh It 16 mesh It 20 mesh II 30 mesh II 50 mesh 11 100 mesh - 100% - 99.5 to 100 - 99 to 100 - 97 to 100 - 50 to 90 ' - 0 to 50 For fineness test, use a 50 gm sample and shake for 30 mins, on the Ro-Tap. WATER TO TC: - 380-420 COLOR: White SAMPLING: Representative samples shall be taken from each shipment for test. If the asbestos is ununiform in screen test and water carrying capacity, it -shall be blended by any suitable method. REMARKS: Tests on each carload of asbestos floats shall be compared with tests of original shipment from same supplier, which was found satisfactory. If any of the tests indicate doubt as to its suitability for use in joint finisher, it shall be tested in a laboratory batch. If this test shows the material to be unsatisfactory, the shipment shall be rejected. HANDLING PRECAUTIONS:- A dust mask should be worn when handling this raw material. Spilled material should be promptly removed. EDO:elz SGP 0015908 RM Spec. No. 18 NEW ASBESTOS SG 210 DESCRIPTION; - Short fibered grit free asbestos USE: SOURCE: - Ingredient in joint compounds ^ Union Carbide Corp.* V C'. ' /fc SPEC1 ICATIONS G .IT - Should be free from gritty particles. Test for grit is made by decantation with water, using a 25 gra sample and an 800 or a 1000 cc beaker. Not less than 750 cc of water shall be used for the first washing, so that any grit present will settle freely and not be held in suspension. 0.1% fine grit permitted. FINENESS: U.S. Sieve Series Through 8 mesh II 16 mesh 20 me sh 30 mesh 50 mesh 100 mesh ' - 100% - 99.5 to 100 - 99 to 100 97 to 100 - 50 .to 90 - 0 to 50 For fineness test, use a 50 gm sample and shake for 30 mins, on the Ro-Tap. WATER TO-TC: 380-420 COLOR: - White SAMPLING: - Representative samples shall be taken from each shipment for test. If the asbestos is ununiform in screen test and water carrying capacity, it shall be blended by any suitable method. < REMARKS: Tests on each carload of asbestos floats shall be compared with tests of original shipment from same supplier, which was found satisfactory. If any of the tests'indicate doubt as to its suitability for use in joint finisher, it shall be tested in a laboratory batch. If this test shows the material . to be unsatisfactory', the shipment shall be rejected. HANDLING PRECAUTIONS: 'DO: elz A dust mask should be worn when handling this raw material Spilled material should be' promptly, removed. SGP 0015909