Document MRZdmwk44k5G8zrZYba0vGKM

DownloadSearchable PDFRandom document
DESCRIPTION: COATING: A cold rolled Temper #4 strip steel clad on one side with copper. The copper cladding shall be 10% minimum, of the overall gauge. The cladding is to consist of phosphorous deoxidized or OFHC Copper. HARDNESS: Rockwell 30T, 60 max. on steel side. THICKNESS TOLERANCE: Thickness____________________ Thickness ___________ Width__________ Tolerance .010" to .011" incl. over Oil" to .012" incl. over .011" to .012" incl. over .012" to .019" incl. over .012" to .019" incl. over 1/2" to 10" incl. over 1/2" to 9" incl. over 9" to 15" incl. over 1/2" to 6" incl. over 6" to 15" incl. .001" .001" .0015" .001" .0015" 0 WIDTH TOLERANCE: (ASTM A-109-62T) Width__________ Tolerance over 1/2" to 6" incl. over 6" to 9" incl. over 9" to 12" incl. over 12" to 20" incl. .005" .005" .010" .016" QUALITY: PACKAGING: 0 Indicates change. APPROVED SOURCE: The copper surface shall be free of all defects; pits, scratches, scale, dents, etc., which will Interfere with the purpose for which the material is intended. The coils shall have an interleaf of paper to pre vent scratches on the surface'of the copper. The coils shall have a 16" to 20" I. D. and weigh a maximum of 1U00 lbs. They shall have an inner core to prevent damage in slitting and shall be sufficiently protected to prevent damage in ship ping. The coils shall be shipped shrouded as per A. I. S. I. procedures. The skids shall have a minimum clearance at the base of 3-1/2". The Victor Company shall reserve the right to re ject and return to the vendor, at his expense, coils damaged upon receipt due to faulty packaging after the vendor is given ample opportunity to in spect the material on the customer's premises. Metals and Controls, Incorporated Unlversal-Cyclops Steel Corporation VPD-101-0002865 DANA-068 r < * -yiCTOS liPG. & GASKET CO. -- PURCHASE SPECIFICATION I, Supersedes Issue of jMarch 17, 1964 P. S. #338 August 12, 1964 COPPER CLAD STEEL FOR GASKETS DESCRIPTION: COATING: HARDNESS: A cold rolled Temper #4 strip steel clad on one side with copper. The copper cladding shall be 10% minimum, of the overall gauge. The cladding is to consist of phosphorous deoxidized or OFHC Copper. Rockwell 30T, 60 max. on steel side. THICKNESS TOLERANCE: Thickness____________________ Thickness ___________ Width__________ Tolerance .010" to .011" incl. over .OH" to .012" incl. over .011" to -J2" incl. over .012" to .019" incl. over .012" to .019" incl. over 1/2" to 10" incl. over 1/2" to 9" incl. over 9" to 15" incl. over 1/2" to 6" incl. over 6" to 15" incl. .001" .001" .0015" .001" .0015" 0 WIDTH TOLERANCE: (ASTM A-109-62T) Width Tolerance over 1/2" to 6" incl. over 6" to 9" incl. over 9" to 12" incl. over 12" to 20" incl. t .005" .005" .010" .016" QUALITY: PACKAGING: 0 Indicates change. APPROVED SOURCE: The copper surface shall be free of all defects; pits, scratches, scale, dents, etc., which will interfere with the purpose for which the material is intended. The coils shall have an interleaf of paper to pre vent scratches on the surface of the copper. The coils shall have a 16" to 20" I. D. and weigh a maximum of 1O00 lbs. They shall have an inner core to prevent damage tn slitting and shall be sufficiently protected to prevent damage in ship ping. The coils shall be shipped shrouded as per A. I. S. I. procedures. The skids shall have a minimum clearance at the base of 3-1/2". The Victor Company shall reserve the right to re ject and return to the vendor, at his expense, coils damaged upon receipt due to faulty packaging after the vendor is given ample opportunity to in spect the material on the customer's premises. Metals and Controls, Incorporated Universal-Cyclops Steel Corporation VPD-101-0002866 ' VICTOR liFG. & GASKET CO. P. S. #338 PURCHASE SPECIFICATION i August 12, 1964 Supersedes issue of March 17, 1964 COPPER CLAD STEEL FOR GASKETS DESCRIPTION: A cold rolled Temper #4 strip steel clad on one side with copper. COATING: The copper cladding shall be 10% minimum, of the overall gauge. The cladding is to consist of phosphorous deoxidized or OFHC Copper. HARDNESS: Rockwell 30T, 60 max. on steel side. THICKNESS TOLERANCE: Thickness____________________ Thickness ___________ Wid th__________ Tolerance .010" to .011" incl. over .Oil'' to .012" incl. over .011" to .012" incl. over .012" to .019" incl. over .012" to .019" incl. over 1/2" to 10" incl. over 1/2" to 9" incl. over 9" to 15" incl. over 1/2" to 6" incl. over 6" to 15" incl. .001" .001" .0015" .001" .0015" 0 WIDTH TOLERANCE: (ASTM A-109-62T) Width______ __ Tolerance over 1/2" to 6" incl. over 6" to 9" incl. over 9" to 12" incl. over 12" to 20" incl. .005" .005" .010" .016" QUALITY: The copper surface shall be free of all defects; pits, scratches, scale, dents, etc., which will interfere with the purpose for which the material is intended. The coils shall have an interleaf of paper to pre vent scratches on the surface of the copper. PACKAGING: 0 Indicates change. APPROVED SOURCE: The coils shall have a 16" to 20" I. D. and weigh a maximum of 1000 lb3. They shall have an inner core to prevent damage in slitting and shall be sufficiently protected to prevent damage in ship ping. The coils shall be shipped shrouded as per A. I. S. I. procedures. The skids shall have a minimum clearance at the base of 3-1/2". The Victor Company shall reserve the right to re ject and return to the vendor, at his expense, coils damaged upon receipt due to faulty packaging after the vendor is given ample opportunity to in spect the material on the customer's premises. Metals and Controls, Incorporated Universal-Cyclops Steel Corporation VPD-101-0002867