Document MKVqqg1j1Jya5qNxp5Z92E9L

Machining Rotors: The A/9.0 Solution Using jhe PfM Machining Rotors 7 / Stepl: MOUNT THE ADAPTER [2 minutes) Step 2: SET UP THE LATHE (2 minutes) ' Step 3: ADJUST FOR LATERAL RUNOUT (I minute) 0 Step 4: MAKE THE CUT (4 minutes) The 4/9.0 Solution -- 4 steps over just 9 minutes to perform topquality brake work. If these steps are followed properly on each brake job, the Pro-Cut PFM 9.0 will operate accurately and efficiently. Stepl: MOUNT THE ADAPTER (2 minutes) Step 1 ol the 4/90 Solution: Technician mourns an adapter to the hub. The fine step is to choose the proper adapter. Most passenger cars require either the four (50-687) or Eve lug (50-688) Direct Fit adapter. Some larger passenger cards and smaller trucks use the WARNING: The adapters are 50-695 adapter. For most trucks and vans,use the larger adapter made of cast iron, not aluminum or iS (50-691).This fits 5, 6,7, and 8-lug vehicles. (See the complete steel like wheels. They are not designed to withstand the use of adapter guide on page 20). impact tools. DO NOT USE IM Once you've selected the correct adapter, try each bolt pattern until you PACT GUNS TO ATTACH THESE ADAPTERS. Twenty to thirty fi_- find the one that fits the vehicle evenly. When possible, use the Ibs applied by hand Is plenty to nuts provided with the machine. Hand tighten nuts. Do not use impact WTenches to mount adapters. Nuts should be hand-tight ened to 25-30 ft. lbs. Excess torque will damage the adapter. secure the adapter to the vehicle. DO NOT USE IMPACT WREN CHES TO TIGHTEN LUG NUTS. Excess torque applied with an Some 4-wheel-drive vehicles require that you remove the cap from the locking hub. Some also require the use of a spacer po-79t impact wrench w3l damage the adapters. Warranty doos not cover this misuse. or 50-246). If the adapter doesn't fit flush and square, use the spacer. Sometimes the holes in the spacer are not needed as the entire bolt pattern will fit id the center of the spacer. PRO-CVTt 80P-S43-BB1B Produced by Ford Motor Company MOTO 000061