Document MGk8mJ0az7krkRa90aRd08KxM
PLAINTIFF'S EXHIBIT
CT-1182
TECHNICAL SPECIFICATIONS
CertairileedlH
SPECIFICATIONS CLASSIFICATION:
A/C Standard Product Specifi cation
T.C.O. SIF. NO.
SPECIFICATION NO:
PASS NO.:
CertainTeed Corporation Pipe and Plastics Group
11
iunMion:
1 SB
Description:
April 30, 1979
A/C Bureau of Reclamation/Fluid Transmissions
Pipe, Couplings and Accessories
l
DATE OF IlftUK:
FEB 1 1982
1.0 CtKERAL
./ -
CertaluTeed Corporation Pipe and Plastics Group "Fluid Transmission" (FT) pipe and "Bureau of Reclamation" (B/R) pipe Is made In nine classes and Is used in supply systems that carry liquid under pressure. The available classes are FT 30 AC, 35, 40. 45, 50, 60, 70. 80, and 90 In the following pipe sires: 6", 8", 10". 12", 14", 15", 16", 18", 20", 21", and 24", except 6" class FT 30 and 35 and 21" and 24" FT'90.
Fluid Transmission and Bureau of Reclamation pipe and couplings are the same, except Fluid Transmission will be supplied vlth Common Groove (CG) rings, and Bureau of Reclamation will be supplied with round, rubber rings.
2.0 CENERAL PRODUCT DESCRIPTION
, Unless otherwise listed herein, refer to "Ceneral Product Specification Data", Section D of the Ceneral Standards Manual, for information concerning the following:
1. Composition 2. Trademarks 3. Test. Methods 4. General Requirements
a. Pipe length b. Lubricant c. Marking d. Installation Instructions e. Finish f. Straightness g. Leakage Allowance
All Fluid Transmission pipe and couplings shall bo completely free of loose or hanging A/C chips in Che Interior. Machined outor surfaces of all pipe (regardless of length), fittings, and adaptors shall be free of hanging machined trim (lace curtains).
The Interior corner of the pipe nose shall be free of all loose or hanging chips. The approved method for cleaning the pipe interior nose la to use the l.D. bevel tool to break this corner.
3.0 C0WF0RHAHCE
The Fluid Transmission Product Line will meet the requirements of the latest Issue of: ASTH C668 - Spec, for Asbestos Cement Transmission Pipe AUVA C402 - Asbestos Cement Transmission Pipe, 18 Inches through 42 Inches for Water and Other Liquids The Bureau of Reclamation Product line (round rings) will meet the requirements of the latest Issue of: Standard Specification for Asbestos-Cement Pressure Pipe put out by the Bureau of Reclamation.
PRCPARCO avt
approved by:
10-0023 (P97) 12/76 CONFID
R D
JL
MFO. |
SALES
i.i.
CTD012326
OTHERS
4.0 TABLE OF HVPHO TEST REQUIREMENTS
Pnge 2
Product
Standard Pipe Lengths Random Pipe Lengths
(1) t'sch length to the pressure specified In Table A for At least five seconds without follurc.
(2) Additionally from each 300 pieces of each size end class per shift of maim*factoring or fraction thereof, an unmachtncj length of at lease one foot oust pass an Instantaneous pressure equal to ten tlusus the ch;s designation (see Table R). The remaining length may then be shipped If It passed a retest of part (1). If the first saa pic fails, two more will be tested and boJi must pass or the lot is rejected.
Same as Test (1) above.
Elioit Length* (t, and 1, MEO)
Sana aa Test (1) above.
Short Lengths (1/8, 1/A and 1/2 FK) Sam, Tat (1).
Standard Coupling
San, at Teat (1)..
Coupling Adaptor (FT to Steel) Stock to meet Test (1).
Coupling Adaptor (FT to FT)
Stock to meet Test (1) for lover claa*.
Pipe Adaptor,
Stock to meet Teat (1) for lover class.
Class
30 35 40 45 50 60 70 80 90
TABLE A
Hydro Proof Test Value
225 263 300 338 375 450 525 600 675
Class
30 35 40 45 50 60 70 60 90
TABLE B
Hydro Burst Test
300 350 400 450 500 600 700 800 900
s.o Flexural Strength
.
Each'standard 13 foot length of pipe in sizes 6 and 8 Inch shall be tested for flexural strength In accordance with the following table when tested In accordance with ASIM C500
FLEXURAL PROOF LOADS Total Applied Load. Lbs. 12 ft. Span
Homlnal Flpe Sire
Inches
Clsss 30 Class 35 Class 40 Class 45 Class 50 Class 60
Class 70 Class 60 Class 90
6
1700
1900
2100
2400
2800
3000
3700
6
2800
3300
3800
4300
4800
3200
5700
6600
7600
6.0 Crush Requirements
A one foot unmachlned sample shell be taken from a pipe In each sire and class for each 300 lengths or portion thereof per shift of manufacturing for this test. The test shall be performed In accordance with ASIM C500.
Fully machined Pipe,. Threaded Couplings, and Pipe Adapters shall be capable of withstanding 75 per cent of the minimum crushing strength specified for the corresponding sire and class of pipe. All ether Items, particularly the couplings, shall be capable of withstanding the same minimum crush . loads at specified for the corresponding size and class of pipe, For those Items' siting ss connectleg pieces between sites and/or claatea, the lowest minimum crush load shall apply.
CTD012327
TECHNICAL SPECIFICATIONS
CertairileedEI
SPECIFICATION CLASSIFICATION:
A/C Standard Product Specification
T.C.O. PtF. NO.
SPECIFICATION NO:
PACE no.:
CertainTeed Corporation Pipe and Plastics Group
11
SUPERSEDES:
15B
DESCRIPTION:
April 30, 1979 A/C Bureau of Reelamatton/FIuid Transmission
3
DATE OF ISSUE:
FEB 1 mi
__________Pipe, Couplings and Accessories________
Nominal
MINIMUM CRUSHING STRENGTH LBS./FT.
Pipe Slxe
Inches
Class
30 35 40 45 12 60 70 80 90
6
2400
3200
4000
4700
5400
6700
9000
6
2000
2400
2800
3400
4000
4E0D
55C0
7400
9303
10
2000
2500 . 3000
3500
4500
5500
7000
9000 11000
12
2000
2500
3000
4000
5200
6400
7300 10003 12200
14
2000
2500
3000
4000
5200
7000
8800 11000 13500
15
2300
2800
3300
4300
5500
7400
9300 12003 14 500
16
2500
3000
3500
4500
5S00
7500
9500 1 7400 15400
16
2500
3000
4000
5000
6500
8500 nooo KOOO 18C30
20
2500
3500
4500
5500
7100
9500 12000 15000 2C0C0
21
2500
3500
4530
5800
7300
9700 12500 16000
-
24
2800
3800
5000
6200
8100 11000 15000 19000
-
7.0 Dlsmetcr - The Inside pipe diameter ahall not vary from the atated nominal standard diameter more than 1/4 inch for plpa 21 Inches and smaller in diameter and S/16 Inch for pipe 24 Inches and larger In diameter.
8.0 Straightness - The straightness of each length of pipe shall not vary more than 0.C5 Inch per foot of length measured In accordance with Section 12 of ASl'M Designation: C500.
9.0 CHEMICAL REQUISEXENTS Uneoeblncd Calcium Hydroxide 1.0 per cent maximum
10.0 STANDARD COUPLING
One coupling suitable for the particular sl7.c end class of pipe vlth s+ilch It Is to be used shell be attached to etch standard and random ltr.gth and shipped as a prebelled unit. Other couplings for use vlth Includes shell be shipped loose.
11.0 RUBBER RINGS FOR FLUID TRANSMISSION
Tvo CG'rubber rings shall be furnished vlth each coupling. ; The rubber rings shall meet the require ments of the latest Issue of AS1M D1869 and P6PC Purchasing Specificatiou No. 507. Rubber rings ,, shall be composed of natural rubber, synthetic elastomer, or when specifically requested, an oil resistant compound. Rubber rings are to be shipped In cartons end properly identified.
12.0 RUBBER RINGS FOR BUREAU OP KECIAMATION
`
Tvo Round Rubbor Rings shall Lc furnished vlth each coupling. The rubber rings shall meet the re quirement* of tho latest Issue of ASTM D1869 and 1`GFG Purchasing Specification No. 530. P.ubber rings shall be composed of natural rubber, synthetic elastomer, and vhen specifically requested, an oil resistant compound. Rubber rlnga are to be shipped In cartons and properly Identified.
-t*t
for pleats supplying Bureau of Reclamation and Fluid-Transmission, It Is permissible to prebell the pipe using round rubber rings. The rings that arc shipped loose to the field mint bo the correct rlnga. That la, round rubber for tho Bureau and CG rings for Fluid-Transmission.
RRBRARCO BY: 08- 10-0023 (P927)
SSPMVID BY!
B aD
| 412/76 CONPIOENTIAL DOCUMENT - NOT
BE DISTRIBUTED TO UNAUTHORIZED PERSONNEL
CTD012328
Page 1*
13.0 B.O.D. CONTROL
All B.O.D.'s In this specification are called out aa mlnimums. Costa aro baaed on a B.O.D. + .04" over the minimum and It Is Intended that the costs will prevent excessive B.O.D.'s.
14.0
Field lubricant shall bo furnished In It ouart cans In aceordanca with tha follovtng table. Flvs (5) gallon palls may be substituted on special custcncr order.
Pipe Sfse, Inches
6 6 10 12 14 13 16 IB 20 21 24
Joints Far I Qt. Container
All Classes
4b 33 2b lb
13 13 12 8
7 7 b
Joints Par 3 Cal. rail
AH Classes
933 725 345 415 280 270 260 170 135 145 133
15.0 PACKACTKC packago In aceordanca trlUt CT btendard packaging CpaelfIcaclon theater 1.
M/AK1HC
a
Marklnj Ink shall conform to P6PG Standard Purchanltig Specification Mo. 502.
Color Code: Use Stu ,dar(I Dlack Ink for Areas (A, B, 6 C)
ABFA A At tha exact center of the pipe, tha following shall be etsmpod. CEKTAINTEKD
(Slaa) FT (Class) AC TYPE II FLUID TRANSMISSION
CTD012329
TECHNICAL SPECIFICATIONS
SPECIFICATIONS CLASSIFICATION:
CertairileedH
A/C Standard Product Specification
T.C.O. REF. NO.
SPECIFICATION NO:
PAOE NO.:
CertainTeed Corporation Pipe and Plastics Group
11
supersedes:
15B
DATE OF ISSUE*.
5
DMcmmoNt
April 30, 1979
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
_____ FBI m
Idaatlfleatlea Harkings: Flrt lint Month, Day, Year, Plant, Shift Example 03087758C
Second line - Pipe No.
239
MCA C
Clasa Pipe'. Tested at _____PS1. (Inaert Proof Treasure) Example: For FT 30 pipe the proof preaaure would be 223 PSI.
Coupling At the approximate centhr around the coupling.
CERTAINTEED (Sixe) FT (Class) AC T
FLUID TRANSMISSION
T - indicates Coupling has been hydrostatically tested.
Example:
CERTAINTEED 6" FT 40 AC T FLUID TRANSMISSION
Pre-Belled
The plant number shall be stamped in black ink on the Coupling B.O.D. and stamped
on the pipe O.D. shoulder near to vhcre the coupling la stamped. Stamp to be 1 inch minimum.
Fully Hechined (FM) At the approximate center of the pipe, the following shall appear:
CERTAINTEED (Site) FT (Class) AC TYPE II
FLUID TRANSMISSION
Example:
CERTAINTEED 6" FT 40 AC TYPE II FLUID TRANSMISSION
In addition, the following shall appear:
1st line: 2nd line: Example:
FM tested at ____ ___ Pl. Company Code. FM Tested at 300 pel.
03087758C
CTDO12330
PREPARED EY:
APPROVED BY:
R * O MFD.
jL
SALES
I.E.
OTHERS
L
Page 6
t-wth f rtn
Standard Randos
i/2 Standard (KEO) 1/4 Standard (KEO) 1/S Standard (KEO)
_n
is* 7'0- to 12'6" (6" InenMou)
ft" j'y.
19.J" (Situ f thru 12" only)
Uoth
-Isd^L
w -I" +0" -I" W -l>* +0" -1" lO.S"
3//6ft * 'he
Dimensions
Tlpa Site, Inches
I.D." Nan.
COj*
00.,* *
Class 30
ft
10 12
iii
IS 16 16 20
21
2li
8.00 10.00 12.00 111 .00 lS.oo 15.00 18.00 20.00
21.00 2U.00
8.80 10.87
12-79 IS .07 16.11
17.IS 19.28
21.Mi
22.52 25.76
8.96 11.05 13.15 15.23 16.27
17.31 19. tt 21.60 22.68 25.92
Cleat 3? 6
10
12 111
IS 16 16 20
21 2ti
6.oo 10.00 12.00 111 .00 IS.oo 16.00 16.00 20.00 21.00 21i.00
8.80 10.89
12.99 15.07 16.11
17.15 19.28
21 .Ml
22.52 25.76
8.96 11 .OS 13.15 15.23 16.27 17.31 19.Mi 21.60 22.68
25.92
daas bO 5--
6 10
12 Hi IS 16
16 20 21
2b
6.00 6.00 10.00 12.00 16.00 15.00 1S.00
18.00 20.00 21.00 2ii .00
6.69 8.80
10.89 12.99 IS.07 16.11
17.15 19.90 22.12 23.28 76. t8
6.65 8.96
11.05 13.15 IS.23 16.27
17.31 20.06 22.28
23.Mi 26.61,
Claaa LS 6 *
10 12 Hi
IS 16 16 20 21
2li
6.00
8.00 10.00 12.00 it. 00 1S.00 16.00 18.00 20.00 21.00 26.00
6.69 8.80 II.2I1
11. Mi 15.50 16.68
i 7.7b 19.90 22.12 23.28 26.68
6.6S 8.96 11.to 13.60 15.66 16.81, 17.90
20.06 22.28
23. Mi 26. t
Class SO 6 6
10 12 ' 111
IS 16 16 20 21 III
6.00 6.00 10.00 12.00 iii .00 lS.no 16.00 18.00 20.00 21.00 21.00
6.91 9.11 11. ?t
13.U 15- SO 16.68
37.7t 19.90 22.12
23.28 26.1,8
7.07 9.27 11.LO 13.60 IS.66 16.81, 17.90 20.06 22.28
23. tl. 26.Mi
*Tolr*iM* O.D'i and 0 .0., 6" thTcuph lA" J .0?" . 18" through Tb* .0)".
C" 20.06"
2.40 2.40 2.90 3.25 3.25 3.25 3.75 3.75 3.75 3.75
2.40 2.40 2.90 3.25 3.25 3.25 3.75 3.75 3.75 3.75
2.40 2.40 2.40 2.90 3.25 3.25 3.25 3.75 3.75 3.75 3.75
2.40 2.40 2.40 2.90 3.25 3.25 3,25 3.75 3.75 3.75 3.75
2.40 2.40 2.40 2.90 3.25 3.25 3.25 3.75 3.75 3.75 3.75
***
P.. 20.06*
oc 2 2"
I" i0.06"
7S-7S 1.00 1.00 1.00 1.00
1.00 1.00
1.00'. . 1.00
16 16 16 16
16 16 20 20
20 20
1.50 1.50 1.50 1.50
1.50 1.50 1.50 1.50 1.50 1.50
IS .75 1.00. 1.00 1.00 1.0c 1.00 1.00 1.00 1.00
.75 .7? .75 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
i< it 16 16 16 16 20 20 20 20
16 i it 16 16 16 16 20 20 20 20
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.5Q 1.30 1.50
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
.75
7S .75 1.00 1.00 1.00 1.00
1.00 1.00 1.00 1.00
16 u 16 16 16 16 16 20 20 20 20
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
1.50 1.50 1.50
.TS .75 .7S 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
16 16
16 16
IS IS
18 20 20 20 20
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
4
t l
6" thru 1J1 K" thru 18'
-.08" ill"
JO" thru 26" - .,16"
B.O.D."
M2 11.1. 13.24 15.J If.44 7.SB l MO 21.76 22.16 26.06
5.26 11.16 IJ.Z7 15.66 16.62 17.56 15.60 21.17 U.tl Jt.lS
7.M 9.26 11.30 11.3* 15.44 It.72 17.71 20.21 22*4 J 23-59 2t.l2
.600 .665 .695 .535 .555 .575 .660 .720 .760 .880
.600 .665 .695 .535 .355 .575 .660 .720 .760 .860
.365 .600 .645 .493 .333 .355 .373 .950 1.060 2.140 1.240
.680 .525 .575 .615 .635 .655 .720 .800 .860 .MO
.680 .525 .575 .615 .633 .653 .720 .800 .MO .MO
.423 .480 .523 .375 .613 .635 .635 1.030 1.140 1.220 1.320
7.0t' 9-J< 11.*9 13-70 15.78 17.OS 18.07 20.21 .* 21.72 26.97
7.16 9-J8 11.92 13.87 15.95 17.15 18.22 20.44 22.72 23.8* 27.25
.345 .400 .620 .720 .750
.MO .870 .930 1.060 1.140
1.240
.
.453 .355 .620 .720
.730
' .MO .870
.930 1.060 1.140 1.240
.425 .480 .700 .too .130 .920 .930 1.030 1.140 1.220 1.320
.333 .633 .700 .800 .838 .120 .930 1.030 1.140 1.22D 1.320
CTD012331
TECHNICAL SPECIFICATIONS
SPECIFICATIONS CLASSIFICATION:
CertainTeedH
A/C Standard Product Specification
T.C.O. REF. NO.
SPECIFICATION NO:
PAOE NO.:
CertainTeed Corporation Pipe and Plastics Group
11
supersedes:
April 30, 1979
15B
7
OATE OF ISSUE:
FEB 1 1982
ducription:
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
"1 1
01
Hv a*.
Oise* to
6 so It 111 2$
It
to tl til
das* TO
e 10 22
25 26 IB to tx Mi
S!*12
e 10 |2 Ifc 25 16 16 to tl tb
CllM 90
8 ' 10
12 111 IS 16 18 to
I.D." Mm 1
1* .
$80 t.60 10.00 12.00 lb .00 IS .00 lis.00 18.00 20.00 21.00
2b .00
6.91
9.11 11.66
13.92 16.22
17.28 18.b6 20 .SO
22.81
21.96 27.b2
7.60 10.00 a.00 lb.00
tS.flt 16.90
It.00 20.00
21.00 ab.oo
6.91
9.11 11.66
11.92 16.22
17.28 I8.b6
20.9b 23,28 2k.38
*7.96
$.?o 7.60 9.60
ll.Ui l}.6o lS.cn
1$ jo I8.cn 10.00 21.00 2b .00
6.91 9.11 11.66 11.92 16.22
17.99 18.b6 20.9b
RA At
2b. 30 27.96
$.70 7.60 9.60 li.bb 11.60 li.bb iS.$o 18.00 20.03
6.91
9.11 11.66
13.92 16.22
17.99 18.b6
22.18 2b.66
OOj* s
e* * *0.06* -0.06"
7.07 9.27 11.82 lb.08 16.38 17.bb 18.62 20.66 22.99 2b.l2 2T.S8
T.07 9.27 11.82 lb.CO 16.38 17 .bb 16.62 21.10 23.bb 2b. Sb 28.12
7.07 9.27 11.82 li.oe 16.38 18.15 18.62 21.10 23. bb 2b .Sb 28.12
3.40
3.25 3.15 3.75 3.75 3.71 3.75
1.40 2.40 2.40 2.90 3.25 3.25 3.25 3.75 3.75 3.7J 3.35
1.40
3.75 3.75 3.75
.75 .7S .75 1.00 1.00* 1.00 1.00 1.00 1.00 1.00 1.00
.75 .75 .75 1.00 1.00 1.00 1.00
1.00 1.00 1.00 1.00
.IS
7 .75 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
7.07 9.27 11.82 Ui.08
16.39 18.1$ 18.62
22.3b 2b.82
3.40 2.40 2.40 2.99 3.25 3.25 3.75 3.75
5.75
.7$ .75 .75 1.00 1.00 1.00 1.00
1.00 1.00
It 16 16 16 IS It It 20 20 20 20
It 16 -16 16 16 IS IB 20 20 20 20
16 16 16 16 16 18 18 20 20 20 20
16 16 16 16 16 16 It 20 20
* Tolerate* O.D.. end O.D.j 6" throgph lit* .02*.
16* through 2b* .03>".
6" thru 12" IV thru 18" 20" thru 2V
-.08"
-.12"
-.14"
I* *0.06"
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
l.to 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 !.S0 1.50 1.50
1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50
B.O.D." Kin.
7.12' 9.32 II.9I lb.17 16.50 17.61 18.7b 20.9b 23.26 74.44 27.96
7.12 9.32 11.93 lb.35 16.70 17.93 19.09 21.bB 23 75 25.10 28.60
.555 .655 .630 .960 1.610 1.140 1.230 1.250 1.415 1.480 1.710
.555 .655 .630 .960 1.310 1.420 1.230 1.470 1.640 1.690 1.980
7.36 9.46 11.91 14.17 16.50 16.43 16.95 21.92 24.36 25.69 29.22
7.34 9.62 12.34 14.52 16.92 18.28 19.32 22.60 25.16
.60S .755 1.030 1.240 1.310 1.495 1.460 1.470 1.640 1.690 1.990
60S .755 1.030 1.240 1.310 1.775 1.480 2.090 2.330
.635 .735 910 1.040 2.190 1.220 1.310 1.330 1.495 1.360 1.790
.633 .735 .910 1.040 1.390 1.500 1.310 1.530 1.720 1.770 2.060
685 835 1.110 1.320 1.390 1.575 1.360 1.550 1.720 1.770 2.060
.685 635 1.110 1.320 1.390 1.835 1.560 2.170 2.410
FASPARED BY:
n.&sZfr
APPROVED BY:
R D
IIV urn
J.4A
02-10-0023 (P927) 12/76 CONFIDENTIAL DOCUMENT - NOT Tb BE DDIIS.TTRRIBUTED TO UNAUTHORIZED PERSONNEL
CTD012332
Page 8
F" +0.032" Min -0.000"
+0.00"
-0.06"
L"., +0.06
B.O.O." Kin.
Class 30
8 9.S4
9.09
8.92
.92
.42
.18
.76
.093
3.50
10 11.63
11.18
11.01
.92
.42
.18
.76
.093
3.50
12 13.73
13.28
13.11
.92 .42 .18 .76 .093 4.50
14 15.95 15.39 15.20 1.00 .42 .25
.83 .093 5.20
7,00 7.00 8.00 9.00
10.50 12.50 14.70 17.60
IS 16.99
16.43
16.24
1.00
.42
.25
.83
.093
5.20
16 18.03
17.47
17.28
1.00
.42
.25
.83
.093
5.20
9.00 9.00
18.40 19.31
18 20.10
19.60
19.41
1.00
.42
.25
.83
.093
6.20
10.00
21.53
20 22.32
21.76
21.57
1.00
.42
.25
.83
.093
6.20
10.00
23.83
21 23.40
22.84
22.65
1.00
.42
.25
.83
.093
6.20
10.00
25.11
24 26.64
26.08
25.89
1.00
.42
.25
.83
.093
6.20
10.00
28.43
Class 35
8 9.54
9.09
8.92
.92
.42
.18
.76
.093
3.50
7.00
10.50
10 11.63
11.18
11.01
.92
.42
.18
.76
.093
3.50
7.00
12.75
12 13.73
13.28
13.11
.92
.42
.18
.76
.093
4.50
8.00
15.00
14 15.95
15.39
15.20
1.00
.42
.25
.83
.093
5.20
9.00
17.60
IS 16.99
16.43
16.24
1.00
.42
.25
.83
.093
5.20
9.00
18.40
16 18.03
17.47
17.28
1.00
.42
.25
.83
.093
5.20
9.00
19.80
18 20.16
19.60
19.41
1.00
.42
.25
.83
.093
6.20
10.00
21.77
20 22.32
21.76
21.57
1.00
.42
.25
.83 .093 6.20 10.00 24.01
21 23.40
22.84
22.65
1.00
.42
.25
.83
.093
6.20
10.00
25.24
24 26.64
26.08
25.89
1.00
.42
.25
.83
.093
6.20
10.00
28.65
Class 40
6 7.43
6.98
6.81 1.00 .42 .18 .76 .093 3.40
7.00
8.18
8 9.54
9.09
8.92
.92 .42 .18 .76 .093 3.50
7.00
10.50
10 11.63 12 13.73
11.18 13.28
11.01 13.11
.92
.42
.18
.76
.093
3.50
.92
.42
.18
.76
.093
4.50
7.00 8.00
12.75 15.00
14 15.95
15.39
15.20
1.00
.42
.25
.83
.093
5.20
9.00
17.60
15 16.99
16.43
16.24
1.00
.42
.25
.83
.093
5.20
9.00
18.67
16 18.03
17.47
17.26
1.00
.42
.25
.83
.093
5.20
9.00
19.80
18 20.78
20.22
20.03
1.00
.42
.25
.83
.093
6.20
10.00
22.82
20 23.00
22.44
22.25
1.00
.42
.25
.83
.093
6.20
10.00
25.24
21 24.16
23.60
23.41
1.00
.42
.25
.83
.093
6.20
10.00
26.79
24 27.36
26.80
26.61
1.00
.42
.25
.83
.093
6.20
10.00
29.98
Class 45 V 7.43
6.98
6.81
1.00
.42
.18
.76
.093
3.40
7.00
8.18
8 9.54
9.09
8.92
.92
.42
.18
.76
.093
3.50
7.00
10.67
10 11.98
11.53
11.36
.92
.42
.18
.76
.093
3.50
7.00
13.30
12 14.18
13.73
13.56
.92
.42
.18
.76
.093
4.SO
8.00
15.55
14 16.38
15.82
15.63
1.00
.42
.25
.83 .093 5.20
9.00
18.20
15 17.56
17.00
16.81
1.00
.42
.25
.83
.093
5.20
9.00
19.51
16 18.62
18.06
17.87
1.00
.42
.25
.83
.093
5.20
9.00
20.42
18 20.78
20.22
20.03
1.00
.42
.25
.83
.093
6.20
10.00
23.20
20 23.00
22.44
22.25
1.00
.42
.25
.83
.093
6.20
10.00
25.66
21 24.16
23.60
23.41
1.00
.42
.25
.83
.093
6.20
10.00
26.93
24 27.36
26.80
26.61
1.00
.42
.25
.83
.093
6.20
10.00
30.52
Clast 50
7.65
7.20
7.03
.92 .42 .18 .76 .093 3.50
7.00
8.40
8 9.85
9.40
9.23
.92
.42
.18
.76
.093
3.50
7.00
10.90
10 11.98
11.53
11.36
.92
.42
.18
.76
.093
3.50
7.00
13.30
12 14.18
13.73
13.56
.92
.42
.18
.76
.093
4.50
8.00
15.76
14 16.3.'
15.82
15.63
1.00
.42
.25
.83
.093
5.20
9.00
18.49
IS 17.56
17.00
16.81
1.00
.42
.25
.83
.093
5.20
9.00
19.82
16 18.62
18.06
17.87
1.00 .
.42
.25
.83
.093
5.20
9.00
20.69
18 20.78
20.22
20.03
1.00
.42
.25
.83
.093
6.20
10.00
23.30
2Q 23.00
22.44
22.25
1.00
.42
.25
.83
.093
6.20
10.00
25.78
21 24.16
23.60
23.41
1.00
.42
.25
.83
.093
6.20
10.00
27.07
24 27.36
26.80
26.61
1.00
.42
.25
.83
.093
6.20
10.00
30.66
* Tcilarance A, Hi and Bs 6" through 16" +.025". 18" through 24" +.040".
CTD012333
TECHNICAL SPECIFICATIONS
CertairifeedlH
SPECIFICATIONS CLASSIFICATION:
A/C Standard Product Specification
T.C.O. REF. NO.
SPECIFICATION NO:
PASS no.:
CertairiTeed Corporation Pipe and Plastics Group
11
supersedes:
15B
DATE OF ISSUE:
9
CRIPTION:
Apr 11 30, 1979
_____ ern i___ lAiuk________
A/C Bureau of Reelamation/Fluid Transmission _________ Pipe, Couplings and Accessories________
Coupling *"
Slxt. In *
Claaa 60 i 7.65 8 9.65
10 12.40 12 14.66 14 17.10 13 18.16 16 19.34 16 21.38 20 23.71 21 24.84 24 28.30
'Claaa 70 7:65
8 9.85 10 12.40 12 14.66 14 17.10 13 16.16 16 19.34 16 21.82 20 24.16 21 25.26 24 28.84
Bi" *
7.20 9.40 11.95 14.21 16.54 17.60 18.78 20.82 23.15 24.28 27.74
7.20 9.40 11.95 14.21 16.54 17.60 18.78 21.26 23.60 24.70 28.28
82" *
7.03 9.23 11.78 14.04 16.35 17.41 18.59 20.63 22.96 24.09 27.55
7.03 9.23 11.78 14.04 16.35 17.41 18.59 21.07 23.41 24.51 28.09
C" +0.03" -0.01"
J" +0.00" -0.04"
Jl"
+0.02" -0.00"
.92 .42 .18
.92 .42 .18
.92 .42 .18
.92 .42 .18
1.00
.42
.23
1.00 .42 .25
1.00 .42 .25
1.00 .42 .25
1.00 .42 .25
1.00 .42 .25
1.00 .42 .25
.92 .42 .18
.92 .42 .18
.92 .42 .18
.92 .42 .18
1.00
.42
.25
1.00
.42
.25
1.00 .42 .25
1.00
.42
.25
1.00 .42 .25
1.00 .42 .25
1.00
.42
.25
Claat 60
6 7.65
7.20
7.03
.92 .42 .18
6 9.85
9.40
9.23
.92 .42 .18
10 12.40
11.95
11.78
.92 .42 .18
12 14.66
14.21
14.04
.92 .42 .18
14 17.10
16.54
16.35
1.00
.42
.25
IS 18.67
18.31
18.12
1.00
.42
.25
16 19.34
18.78
18.59
1.00
.42
.25
18 21.82
21.26
21.07
1.00
.42
.25
20 24.16
23.60
23.41
1.00
.42
.25
21 25.26
24.70
24.51
1.00
.42
.25
24 28.84
28.28
28.09
1.00
.42
.25
Claaa 90
6 7.65 6 9.85
7.20 9.40
7.03 ` 9.23
.92 .42 .18 .92 .42 .18
10 12.40
11.95
11.78
.92 .42 .18
12 14.66
14.21
14.04
.92 .42 .18
14 17.10 16.54 16.35 1.00 .42 .25
IS 18.87
18.31
18.12
1.00
.42
.25
16 19.34 18.78 18.59 1.00 .42 .25
18 23.06
22.50
22.31
1.00
.42
.25
>0 25.54
24.98
24.79
1.00
.42
.25
*Mnmn A, *1 and >2 4" through 16" +.023". 18" through 2*" +.040".
r" Min.
*" +0.032" -0.000"
M"
+0.00"
L'i
-0.06" +0.06 `
B.O.D." Kin.
.76
.093
3.50
7.00
8.76
.76
.093
3.50
7.00
11.32
.76
.093
3.50
7.00
14.36
.76
.093
4.50
8.00
17.00
.83
.093
5.20
9.00
19.80
.83
.093
5.20
9.00
21.02
.83
.093
5.20
9.00
22.28
.83 .093 6.20 10.00 24.79
.83 .093 6.20 10.00 27.49
.83 .093 6.20 10.00 28.79
.83 .093 6.20 10.00 32.47
.76
.093
3.50
7.00
8.76
.76
.093
3.50
7.00
11.32
.76
.093
3.50
7.00
14.36
.76
.093
4.50
8.00
17.13
.83
.093
5.20
9.00
20.26
.83
.093
5.20
9.00
21.52
.83
.093
5.20
9.00
22.54
.83 .093 6.20 10.00 26.00
.83 .093 6.20 10.00 28.78
.83 .093 6.20 10.00 30.03
.83 .093 6.20 10.00 34.34
.76
.093
3.50
7.00
9.35
.76
.093
3.50
7.00
12.00
.76
.093
3.50
7.00
15.15
.76
.093
4.50
8.00
17.90
.83
.093
5.20
9.00
20.50
.83
.093
5.20
9.00
22.46
.83
.093
5.20
9.00
23.20
.83 .093 6.20 10.00 26.68
.83 .093 6.20 10.00 29.52
.83 .093 6.20 10.00 30.81
.83 .093 6.20 10.00 35.22
.76
.093
3.50
7.00
9.35
.76
.093
3.50
7.00
12.00
.76
.093
3.50
7.00
15.15
.76
.093
4.50
8.00
17.90
.83
.093
5.20
9.00
21.06
.83
.093
5.20
9.00
23.01
.83
.093
5.20
9.00
23.47
.83 .093 6.20 10.00 28.29
.83 .093 6.20 10.00 31.41
MtCPAItKD or:
APPROVED by:
R * D | MFD.
SALES
JL *w J.A.A-
I.E.
OTHERS
CTD012334
Page 10
mu k*ceik3> rxrt (no
Pine Slt
, p- cc 2io.oA* i
6* through 12" 16" through 16" 18" through 26"
1,00 1.00 1.00
16 18 22
Std. Half Std. Quarter Std. Eighth
Pipe Site 40" -1"
40" -1"
t 0.5"
6" thru 12" 6' 6' U" thru 16" 6* 6* 18" thru 24" 6' 6*
3* 3" 3* 3" 3* 3"
IP.3"
Pip. Sit., Inc hoi
Cl... 50
8 10
12
ll
IS Id
IB 20 21 21*
I.D." Non.
8.00
9.90
12.00
lli.00 111 .60
IS. 85 18.00
20.00 21.00 21* .00
O.D." #
6.Bo 10.89
12.99 15.07 16.11
17.IS 19.28
21.1*1*
22.52
as. 76
C1.98 JS
e
10 12 16
IS 16
18
TO
n
21*
7.80
9.90
11.65 13.75 It.80 15.50 17.35
19.(5
20.70 25.00
8.80
10.89 12.99 15.07 16.11 17.15
19.28 21.1*1*
22.52 2S.76
Claaa 60
6
5.90
669
8
7.60
6.80
10
9.55
10. B9
12
11.70
12.99
111
13.75
is.07
IS
Hi .1*5
16.11
16
15.50
17.15
18
18.00
19.90
20
20.00
22.12
21
21.00
23.28
26
21*. 00
26.1*8
ra.net entar O.D. 6" through 16' 10.03?"
18" through 26 " *o.03$M
tod O.D.
6" through 16" f0.0>0"
IP" through 26" *0.030" featured 6" In on both enis.
Pipe SI so. Inche*
Cl* 1*5
d 8 10 12 lb 15 16 ie 20 21 111
Class $0
6 8 10. 12 111
is
16 16 20 21 2li
Claaa do
6 6 10 12 111 15
Id
18 20 21
at#
I.D." Km.
$.60 7.55 9.90 12.00 15.00 19.00 16.00 17.15 19.(5 21.00 25.35
5.95
6.00 9.50
li.tt
13.75
is.00
15.85 17.35 <9.(5
20.70 23.50
5.(0 7.80
9.90
12.00 1<i.00 15.00 16.00
17.35 19.65
20.70 23.50
O.D,"
6.69 8.60 11.21* 13.1*1* 15.50 16.68 17.71* 19.90 22.12 23.28 26.1*8
6.91 9.11 11.21* 13.U* IS.So 16.68 17.71* 19.90
22.12
23.28 26.1i8
6.91 9.11 11.66 13.92 16.22 17.28
I8.I16 20.50
22.83 23-96 27.1*2
Pip. Slu,
Inch*.
ci... 70
6 8 10 12 Xh IS 16 18 20 21 aii
CUaa 60
6 8
10
12 Hi IS 16
18 20
n
211
Cli 90
6 8 10 12 ll* IS 16 18
20
ij>.*
Hat,
5.(6
7.80 9.90 11.00 15.00 19.00 IS.tt 1?9..00 20.70 25.00
5.70 T.SS 9.55 11.85 13.W
IS. 00
15.50 17.35
19.00 20.00
2J.1|0
S.30 7.1iS 9.SS
11.SS
13.20
H1.I1S
IS.30
16.00 20.00
O.D," 0
6.91 9.11 11.66 13.92 16.72 17.28 I6.I16 20.91* 23.26 21*.36 27.96
6.91 9.11 ll.dd
13.92
16.22 17.99 18.U6 20.9li 23.26 7li.38 27.96
6.91 9.11 11.66 13.92 16.22 17.99 16.1*6 22.18 21*. 66
At Plant $7 the following tolerance la effective to allov for cane tooling.
QOI25*
Tolerance - 6*
through Id" Center 0D l0.02$* tod O.D. 30.020"
16" through 26" Conter O.D. *0.035"
tod O.D. 10.030"
In addition, thoro cannot bo a atop (rooter than 0.02$" (0.012$* on a aide).
CTD012335
TECHNICAL SPECIFICATIONS CTD012336
pipe ADAPTOR (PUP IS)
Page 12
Nsrt&ngi
Cl - PAD 15 (Stse) FI (Clasi) AC FLOH> TPAHSHISSIOB
Dimensions
Pipe Sire. Inches
6,6,10 12 111, 15.16 18,20,21,21i
AC Cla0
All All All All
x
3.06 3.56 1.08 It .56
Eotat 1. Refer to Pally Machined Plpo, 'ago 10, for dimensions not shown.
?. Ustsneo X la Insertion depth into coupling to Insure positive separation of pipe ends. Mark will be painted around the circunference of the PAD with standard black ink and shall be 1/h* wide. Pplnt P to be in line with outside face of coupling.
PIPE AMPT0H (PAD 16)
BerV-ngt
CT - PAD 14
(Slsa) FT (Class) AC TUT1D mSSHISSIOM
s5+0 '
1 1 : - *; t `{T.-
-t. : s S:
00, oo2
ID
rrcr_-,^ -\CPC
Dimensions
Hotel 1. Available In all slaet and diasses. t. Refer to Standard Pipe, Pages 6 end 7, for all dissensions not shown except for length.
CTD012337
TECHNICAL SPECIFICATIONS
SPECIFICATIONS CLASSIFICATION:
CertainTeedGI
A/C Standard Product Specification
TsC.O. RIF. NO.
SPECIFICATION NO:
PAOE NO..
CertainTeed Corporation Pipe and Plastics Group
11
unsaiots:
April 30, 1979
15B
"*t or iaauc:
FEB 1
13 982
ocacniPTiON:
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
flot Adaptor (rAD 17) A/C to Heehnlel Joint and/or Poured Boil
nr
00i
------------------------- \_2 -------------
Ph ih W STRIPE
cc\ ----------------- \.--------- ^nr
I------------X-H
ID
F
-j-- -.5O'*j06`
O'I <x>2
'
Cl Uorh.mlC'tl Joint
for diitaiulons not ehovn, refsr to Folly Machined Pipe,
Ksxtdnei
AC SIDE CT - PAD 17 (Site) FT (Cl*s) 6C
fluid transmission
MmnMcns
Plpo Site, Inches . AC Classes
I.D."
t<KI.
O.D.i* *0.0?"*
6 . tiO.tS S.65 6.0
e jo to is 7.SS 8.60
e So to so 7.SS 9.11
10
. JO to liO
s.ss 10.89
10
10
liS.So 60 to so
S.ss 11.21 9.SS 11.66
12 JO to tiO 11.IS 12.99
12
IS,so
11.IS IJ.I1I1
12 to to yo li.IiS 1J.92
111 Hi
JO to 1|0 IS.So
ij.60 U.60
IS.07 IS.so
111 to to SO U.to 16.22
16 JO to liO 1S.S0 17.15
16
15,50
lS.So 17.71
16 tO to SO IS. So 18.16
ie
JO.JS
17.JS 19.23
18 to to So 17. IS 19.90
18 to 17. IS 20.S0
18
70, to
17.JS 20.Sli
10 so 17.JS 27,10
20 1S.OO 21.till
20 lO to So 19.00 72.12
xto>
0
70,eo
IS.00 19.00
22.8) 7J.26
20 so 19.00 21.66
Pll
Jo.jS
2J.OO 25.76
til lo to So 2) .00 76.18
2li
n
to 70,80
2J.OO 2J.OO
27.62 27.96
MJ/PB SIDE CT-PAD 17
fluid transmission
O.D. j* >0.02
6.91 . 9.05
9.0S 11.10 11.10 11.10 1J.20 1J.20 1J.20 1S.J0 IS.jo is. JO 17.10 17.10 17.10 19.SO 19.So )9.So 19. SO 19.50 21.60 21.60 21.to 21.60 21.60 75.60
22$5..8800
25.60-
ll"
1S.00 1S.00 lS.co lS.co lS.co 15.07 1S.00 1S.00 lS.oo 19.50
^0 <ft
19.50 1V.S0 IS. so 19 SO is. So 19. So 19.50 19.S0 19.50 19.S0 19.So 19.50 19.S0 19.S0 19.50 19.S0 19.50 19.50
6.CO 8.00
8.00 8.00
6.00 8.00 6.00 e.co e.oo 11.SO
11.50
11 .So
n.So 11.S0 11.S0 11.50
11.50 11.So
11.50
11.50
11.50 ll.So 11.So ll.So
11.50 ll.So 11.50 11.57 11.50
!
J.OS J.05 J.06 J.OS
J.OS J.06 J.56 3 #56
J.ss
Il.os
ti.03
6.03
1.03 ti.06 t.oa 1.53 ti-58
I1.S8
1.53 1.59
fc.Se `
ti.59
1.58 t.58 t.SS l.SS I.S8
li .53
ti.sa
e* Max.
.CO .60 .60 .75
*7 j .75 .75 .75
.75 1.05 1.05 1.05
1.20 1.20 1.70 1.20
1.70 1.70 1.20 1.20
1.20 1.70 1.20 1.20
i1..t2o0
1.40 1.40 1.40
Kttat 1. Distance X la Insertion depth Into couplins to lnouro positive separation of pip* end*. Krk will bo . pointed around tha ctrcmfaranaa of tba R.D with standard black Ink, and shall bo l/li* wide. Point t
to bo In lino with outoldo face of coupllnc.
_______ a Talsranoo on If throusti Pli* lO.Ol*.
wwim nr:
V anoROVwo r:
V? ft.
I
* * D MFO.
ALES
m J6JX
I.K.
OTHERS
02 -10-0023 (P9^7) li/76 COHriOlKTIAl. eOCUMKNT
ro BC OICmWUTCO TO UMAUTHORIUO PKKaONNKL
CTD012338
rxrt mrron (m> io)
lonr Ciu bid
Fg 14 RlfjMr Cloaa Cnd
195'* o-r-
CC
00, oo2
,d
BOO
r*t ==3 iP3c*
C4 OD3
Refer to Siandattl Pipa, Pt^ss 6 end 7 for dimensions not ehovn
Karldng:
CT - fuTH
(SUo) rr (Clm) AC
nUIP THASSMISS10S
Lovor Cleaa Eid
Dimensions
Plpo SI to, TnchdS
AC Class To AC Class
I.D." Hot.
0*D*1N *
O.D.y" e
0.D.1" 3
6
65 to So
6.00
6.69
6.8S
6.91
B
US to 50
a.oo
8.80
8.96
9.11
10
ho to U$
30.00 10.C?
11.05
11.24
30
50 to 6o
10.00 11.26
11.40
il.66
1?
ho to 1*5
12.00 12.99
13.IS
13.Mi
12
SO tc 60
12.00 13. Ui
13.60
13.92
Hi
bO to US
13.60 15*07
IS. 23
IS.So
Hi
SO to 60
Hi .00 15.50
IS.66
16.22
IS
liO to t5
IS.00 16.11
16.27
16.68
IS
SO to 60
15.00 16.68
16.64
17.28
IS
70 to 80
15.00 17.20
17.44
17.99
16
to to US
15.50 17.15
17.31
17.76
16
$0 to 60
16.00 17.71i
17.90
18.66
IB
35 to liO
ie.00 19.20
19.44
19.90
IB
So to 60
18.00 19.90
20.06
20.S0
18
60 to 70
18.00 20.50
20.66
20.96
16
BO to JO
18.00 20.94
71.10
22.18
20
35 to liO
20.00 21. Ml
21.60
22.12
20
SO to 60
20.00 22.12
22.28
22.83
20
60 to 70
20.60 22.83
22.99
23.20
JO
60 to JO
20.00 23.28
23.Mi
26.66
Z]
3S to liO
21.00 22.S?
22.68
23.28
21
So to 6C
21.01 23-28
23 .Ml
23.96
J1
60 to 70
21.00 23.96
24.12
26.38
Zil
3S to liO
24.00 2S.76
25.92
26.68
26
So to 60
2li.00 26.18
26.64
27.62
24
60 to 70
21i.00 27-42
27.53
27.96
;siCT) r-rPAcPciaIS*o ac
pukd nuwmissiow
Higher GUm Znd
0.0.4*
cm iO.O6*
B.O.D." Min.
7.07 9.27 11.60
11.82 13.60 16.08
15.66 16.38 16.86
17.66 16.15 17.50
18.62 20.06 20.66
21.10 22.36 22.28
22.99 23-66 26.82
23.66 26.12 26.56
26.66 27.58 26.12
2.30 2.10 2.30
2.30 2.80 2.80
3.25 3.2S 3.25
3.25 3.25 3.2S
3.25 3.75 3.75
3.7S 3.75 3.75
3.7S 3.75 3.75
3.75 3.75 3.7S
3.75 3.75 3.75
7.16 9.38 11.66
11. OS 13.70 16-11
IS.75 16.61 17.05
17.81 18.63 17.99
10.65 20.16 20.96
21.60 22.60 22.30
23.26 23.60 25.16
23-72 26.66 25.10
26.02 27.96 20.60
Tolerance on 0.D.1( 0. 0.2, O.D.j , 0.0.4 6" through 16" iOQ2" 18* through ?h* i0.03"
PlfE ADAPTOR (PAD 19) CT to VALVE
cc> r--f
'-Z
'4
STRIPE
.-----x ------1
MLJnsL
----- L,l
10
'50'*05'
7-7^ ^*2' I ooz
VfrA/C End
(A/C Sizes)
Rarer to Standard Pipa, Paf.oa 6 and ?, for uchlnad dlmnalona not ahoun.
Harklnci
AC CTO
TAt.TC HD
rra - pad
(Hu) (Cleat) AC FLUID TRANSMISSION
l|vJaeluiue >M)
CTD012339
TECHNICAL SPECIFICATIONS
Page 16
TAPES B For Bureau of Reclamation Only
tier to Standard Pipe, Pages 6 and 7 and Standard Coaling, Pages 8 and 9 for dimensions not shown.
Marking]
CE&UHITEEP (Else) X (Sftsa) TAPER
(Cl--) AC
atu I.D.,"
SPSieb*.
Ron. 8.00
12x10 10.00
lfaa2 12.00
lSW 12.00
lSxllt 16*15 18*15
18*16
lb.00 15.00 lS.oo
16.00
toxs.6 71xl6
21x20 7bx21
18.00 18.00
20.00 21.00
i.d.2 <0.00" -o.o5"
10.00 12.00 111 .00 lS.oo
15.00 16.00 18.00 18.00
20.00 21.00 n.oo A .00
KJ.125" -0.00"
1.50 l.So ll.OO b.oo
li-So b.So li.So b.50
S.oo 5.00 5.60 5.oo
Dimensions
0.00" B.O.D." -0.061" Min.
1.50 1.50 ll.OO
ll.OO
11.U 13.24
15-18
l6.61i
I1.50 I1.50 li.So
li.So
17.60 I8.I1O 19.60 19.60
5.00 5.00 5.oo
S.oo
21.76 27.61i 21.81
26.08
Sire Inches
12x10 llixl2 15x12
l5xlli 16x15 16x15 18x16
20x18 21x18 21x20 21ix21
I.D.j"
I.D.i" 1 10.00" Non. -0.0$"
b.oo 10.00 12.00
12.00
10.00 12.00 iii. 00
15.00
111 .00 lS.oo
15.00 16.00
1S.00 16.00 18.00
18.00
18.00 16.00
20.00 21.00
20.00 a.00 21.00
2li.00
fog* *
0.125" -0.00
3.50 3.50 ll.OO ll.OO
b.50 li.So li.So li.So
S.oo 5.oo S.oo S.oo
TVjHi B
0.0011 -0.063"
B.O.D." Min.
3.50 3.50 ll.OO
b.oo
11.18 13.27 13.44 16.82
b.5o b.So
b.50 b.5o
17.60 17.9b 19.60 19.80
S.oo 5.00 S.oo 5.00
21.77 22.84
2b .01 26.08
CTD012341
TECHNICAL SPECIFICATIONS
SPECIFICATIONS CLASSIFICATION:
CertainTeedB
A/C Standard Product Specification
T.C.O. REF. NO.
SPECIFICATION NO.*
FADE NO.:
CertainTeed Corporation Pipe and Plastics Group
10
supersedes:
January 16, 1978
15B
17
DATE OF ISSUE:
APR 3 0 1979
description:
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
SLm I.D.i" Xncbts Non.
Class I/O
0x6 6.00
10x8
8.00
12x10 10.00
line? )2.00
I.D.2" 0.00" -0.0$"
8.00 10.00 12.00 lli.OO
l5*12 lSXl6 lfalS 18x15
12.00 it .00
lS-oo 15.00
1S.00 1S.00 16.00 18.00
18x16 20x18 21x18 21x20 26x21
16.00 18.00 1O.00 20,00
21.00
18.00
20.00 21.00 21.00 21l.oo
CISSS 16
8x6 6.00
10x8
8.00
12x10 10.00
lto<12 12.00
B.OO 10.00 12.00 lli.OO
15x12 lSxlli itoS 18x15
12.00 16.00 15.00 15.00
lS-oo lS.oo 16.00 18.00
I8bd6 20X18
21x18 21x20 2lix21
16.00 18.00 18.00 20.00 21.00
18.00 20.00 21.00 21.00 26.00
CltSS 50 6.00
10x8 12x10
8.00 10.00
lid? 12.00
8.00 10.00 12.00 ili.oo
15x12 I5xlli 16x15 16x15
12.00
iii. 00 15.00 lS.oo
lS.oo 15.00 16.00 18.00
18x16 20x18 21x18 21x20 26x21
16.00 18.00
18.00 20.00 21.00
18.00 20.00 21.00 21.00 26.00
te?.A H"
-0.00"
3.50 3.50 3.50 6.00
6.00 6.S0 6.S0 6.50
6.So S.00 S.00 5.00 5.oo
3.50 3.50 3.5o 6.00
6.00 6.So 6.S0 6.5o
6.50 S.00 5.00 S.00 S.00
3.50 3.5o 3.50 6.00
6.00 6.5o 6.5o 6.5o
6.50 S.00 S.00 S.00 S.00
Dimensions
See*
H" 0.00" -0.063"
B.O.D." Min.
3.50 3.50 3.50 6.00
6.00 6.50 6.S0 6.50
6.50 S.00 S.oo 5.oo
5.on
9.26 11.30 13.38 IS.46
16.82 17.60 18.67 20. n
20.21 22.82 23.72 25.26 26.82
3.So 3.50 3.50 6.00
6.00 6.50
6.So 6.5o
6.50 S.oo S.oo S.oo S.oo
9.36 11.49 13.70 15.73
17.05 18.20 19.51 20.21
20.62 23.20 23.72 25-66 26.93
3.50 3.5o 3.So 6.00
6.00 6. So 6.50 6.S0
6.So S.oo S.oo S.oo 5.00
9.38 11.52 13.76 15.87
17.36 18.69 39.82 20.66
20.69 23.30 23.86 2S.76 27.25
Size I.D.i" Inches - Non.
Class 60
6.00
10x8
8.00
12x10 10.00
16x12 12.00
15x12 15X16 16x15 l8xlS
18x16 20X18 21x18
12.00 16.00 15.00 15.00
16.00 18.00 18.00
Class 70
Bx6 6.00
10x8
8.00
12x10 10.00
16x12 12.00
15x12
15x16 161x15
16x15 18x16
12.00 16.00 15.00 lS.oo 16.00
Class 80
8x6 6.00
10x6
6.00
12x10 10.00
16X12 12.00
15X12 15x16
12.00 16.00
Claas_9Q
6.00
10x8
8.00
12x10 10.00
16x12 12.00
15X12 12.00
I.D.2" 0.00" -0.0S"
8.00 10.00 12.00 16.00
15.00 1S.00 16.00 18.00
18.00 20.00 21.00
8.00 10.00 12.00 16.00
15.00 15.00 16.00 16.00 18.00
8.00 10.00 12.00 16.00
15.00 1S.00
8.00 10.00 12.00 16.00 15.00
teg .A K*1
"0.125" -0.00"
3.50 3.50 3.S0 6.00
6.00 6.5o 6.5o 6.S0
6.S0 S.oo S.oo
3.So 3.50 3.So 6.00
6.00 6.50 6.5o 6.5o 6.50
3.50 3.50 3.50 6.00
6.00 6.S0
3.50 3.50
3.So 6.00 6.00
"0.00* B^O.D."
-0.063"
3.S0 3.50 3.50 6.00
6.00 6.50 6.S0 6.5o
6.50 S.oo S.oo
9.38 11.91 16.36 17.00
1T.81 19.10 21.02 n.oe
22.26 26.79 26.79
3-50 3.50 3.5o 6.00
6.00 6.S0 6.So 6.50 6.5o
9.32 11.93 16.36 17.13
17.66 20.26 a.52 21.52 22.56
3.5o 3.50 3.50 6.00
6.00 6.S0
9.66
12.00 15.1$
17.90
16.63
10.50
3.50 3.50 3.50 6.00 6.00
9.61
12.36
15.15
17.90
16.26
W 1.00* *.06 \ -.00" T 1.00* ..06 ", -.01"
X . ITS* ..12S*. -.000*
CTD012342
PRKPAMO BY:
APPROVED BY!
cM 02-10-0023 (P927) 12/76 CONFIDENTIAL DOCUMENT
R e D MFOs <
SALES
I.E.
OTHERS
TAPPED COUn.IWG WITH 2V1 x 2" HEXAGONAL BUSHING TkrtUtl Requirement!
Page 18
Coupling shall be hydrostatically tested prior to drilling and tapping and shall meet the requirements of the standard coupling. It is also Intended that couplings shall be able to withstand.the specified hydrostatic pressure after the bushing has been secured.
Rubber Rings
Eh coupling shall be supplied with two (2) rubber rings of the appropriate size and class Oil resistant rings will be supplied when specified by the purchaser.
Jfote:
It Is not essential that the coupling be machined on the entire t.D. The dotted line above shows sn acceptable machining alternative. X" i 125"
for all classes 6" - 10" - 3.50", 12" 4.00". 14" - 16" 4 50" 18" - 24" - 5.00".
l - Mi.00 .2S* -.00* for til slsa* and classes or L* - IS.<30* .}$* -.00" for oil altos snd ap to and taflltttlns olua >0 vfaca ipadned ob ib onkr<
For dimensions not shown refer to standard coupling pages.
Class Sire
6
8
10 12 14 15 16 18 20 21 24
30 35 40
11.50 13.90
16.25 18.60 19.80 20.20 23.00 25.40 26.70 30.10
11.50 13.90 ,16.25 18.60 19.80 20.20 23.00 25.40 26.70 30.10
9.25 11.50 13.90 16.25 18.60 19.80 20.20 24.50 26.70 27.90 31.60
-Mia.
45 so
9.25 11.50 14.55 16.90 19.70 21.20 22.60 24.50 26.70 27.90 31.60
9.80 12.40 14.55 16.90 19.70 21.20 22.60 24.50 26.70 27.90 31.60
60
9.80 12.40 16.'23 19.00 20.85 22.40 24.00 26.00 28.30
-
70
9.80 12.40 16.23 19.00 20.85 22.40 24.00
-
80
10.65 13.50 16.80 19.50 21.35 23.60 24.50
_ -
_
-
90
10.65 13.50 16.80 19.50 21.35 23.60 24.50
_
--
2V * 2" Hexagonal Bushing may be manufactured In:
a. Galvanized Iron b. Brass c. Malleable Iron d. Stainless Steel
Epoxy Formulation Per Con. Stds. Manual Section "0". Use no asbestos liber filler.
Kotc: Must have clearance when thread Is tight. Check threads with go/no-go gauge. Check visually at "A".
CTD012343
TECHNICAL SPECIFICATIONS
SPECIFICATIONS CLASSIFICATION:
CertainleedEI
CertainTeed Corporation Pipe and Plastics Group
A/C Standard Product Specification
T.C.O. REF. NO.
SPECIFICATION NO:
PAOE no.:
10 15B
19
supersedes:
January 16, 1978
DATE OF ISSUE:
flpR 3 0 1979
description:
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
Tapped Coupling with A" x 3" Hexagonal Bushing For Fluid Transmission Only
------------------- L ---------------------------------------------------------------H
, I . * jDRILL 5 501 c a,* +1/8-0' 1
Marking:
CFXTAIMTEED (Sin) TAPPED CFLG FT (Clan)
nan tkamsmissioS ______ 1" KPT ______
Kote:
It Is not essential that the coupling be machined on the entire I.D. The dotted line above shows an acceptable machining alternative. X" * .125" for all classes 6" - 10" - 3.50", 12" - 4.00", 14" - 16" - 4.50", 18" - 24" - 5.00".
4" x 3" Hexagonal Bushing may be manufactured in:
A. Galvanized Iron B. Brass C. Malleable Iron D. Stainless Steel
Motes: 1. For dimensions not shown refer, to Standard Coupling dimensions. 2. Tapped Hole shall be centered on coupling length.
B.O.D." Kin.
Sire" Class
3035
8
11.27 11.17
10
13.83 13.83
' 12
14
16.19 18.63 16.19 18.63
15 16 18
19.83 20.95 23.13 19.83 20.95 ' 23.13
20
25.46 25.46
21
26.72 26.72
24
30.15 30.15
L" + 0.06"
CTD012344
SiM *
ClftBB
8
10 12 Hi IS 16 18 20 21
30 13.00 13.00 lii.OO 15.00 15.00 i5.oo 16.00 16.00 16.00
yi 13.00 13.00 111 .00 15.00 lS.oo i5.oo 16.00 16.00 16.00
mapAMCo mr:.
amtovco nr:
Ml 1W&
R *D
02-10-0023 (P927) 12/76 CONFIDENTIAL DOCUMENT - NOT TO RE DISTRIRUlio TOUNAUTHORIZED PERSONNEL
_2k_ 26.00 16.00
THREADED BRASS INSERT COUPLINCS (TBIC)
Page 20
USE
To provide a means for making service connect tons In acbestos cement pressure pipe systems vherc either MPT .or AMWA threads are employed.
MUSICAL REOUIROIENTS:
All inserts shall be cemented In place with an epoxy adhesive. The workmanship shall be such that there la no evidence of voids or holes, and there shall be no sharp protrusions of the cement on any of Its surfaces. The rubber 0-rlng shall not be placed on the Insert until the Insert Is ready to be cemented In place.
Coupling shall be hydrostatically tested prior to drilling and cementing the Insert Into position and ahull meet tha requirements of the standard coupling. It Is elso Intended that couplings shall be able to withstand the Specific hydrostatic pressure after the inserts hevc been secured.
RUBBER RINGS:
Each coupling shall be supplied with two (2) CG Rubber Rings of the appropriate size end class. Oil resistant tings will be supplied when specified by the purchaser.
MASTIC CLOSURES:
Prior to Insertion, storage and/or shipment, each Insert shall be covered with a plastic closure to prevent 4ass|S to the brass threads. Plastic closures are defined in Standard Purchasing Specification No. 525.
muss INSERTS:
Threaded Brass Inserts and Bushings shall meet the requirements of Purchasing Specifications 523A and 562. Threaded Brass Inserts are available In 3/4" and 1" ALVA "A" and "B" lengths, 3/4" HPT, 1" HPT In "A" and "B" lengths, IV HPT In "A", "B" and "C" lengths. In the cases marked (D, a iy HPT Insert shall be used and
bushed down. If necessary, to the proper size.
In the cases marked
the coupling shall be counterbored, as shewn below, to allow for proper joining of the
Corporation Stop. A "C" length IV HPT Insert shall be used and bushed down, If necessary.
HARKING
Insert size lo to be stenciled near the Insert. Example: ly'b'PT. Other marking as shewn.
.Rotesi 1. For machining dimensions not shown refer to standard CC Pipe and Coupling In the specification. 2 TBIC's ore available In any combination of listed Inserts and coupling sizes. 3. TBIPA's arc available In any combination of listed Inserts and pipe sizes. A. Double outlet - Inserts are to be locatcJ 180 apart. 5. Protrusions chall be filleted with epoxy. 6. "J" diameter to be centered on "D". 7. Rubber "0" rings per Standard Purchasing Specification No. 524..
PROCEDURE FOR USE OF BUSHINGS
Use normal cleaning procedure for inserta and bushings (degreasing). After slinking the bottle as directed on tha label, apply Loc-titc 0252 to tha second lull thread ol tho bushing, filling the thread nearly full all tha way around. Scraw tha hushing Into tha Insert and tighten Immediately to about 60-60 foot pound*. If hoc-tit* ooees out*Ida the fitting in any noticeable lamint, us* las*. Allow 24 hour* to euro.
CTD012345
TECHNICAL SPECIFICATIONS
Coupling Adaptor (A/C to Steel) For Fluid Transmission Only
Page 22
888888
Adaptor Site. In.
1
6 6 6 10 12
nd Claoa TIT
All All All All
All
evergtool or Plastic
8ie*. Li. --i~ X5
6 6.625 6 6.625 6 8.625 10 10.750
12 12.7SO
OC
r12r"
13 13 16
16
16
PJjac-nalono
.03* -.01" -Tier-
.63 .63 .63 .61 .63
V
Kin. TH? .50 So .62 .62 .62
Adaptor !Size, Inches
6x4 6x6 8x6 8x8 10 x 10 12 x 12
19
10.50 10.50 12.50 14.70
< 8.0.D." Jfls, 35 40 45
-
10.50 10.50 12.75 15.00
8.18 8.18 10.50 10.50 12.75 15.00
8.18 8.18 10.67 10.67 13.30 15.55
a .03" .00" rzr
.35 .35 .50 .50 .50
19
6.40 8.40 10.90 10.90 13.30 15.76
R a* -.010* "1ST
.200 .200 .200 .200 .200
19
8.76 8.76 11.32 11.32 14.36 17.00
V
2.0?5" T.tr
7.31 7.31 9. AO ii.55
13.55
B
7.025"
6.69 6.69 8.69 10.8i 12.8]
6.77
6.77 6.78
10.91 12.92
2790 80
8.76 8.76 11.32 11.32 14.36 17.13
9.35 9.35 12.00 12.00 15.15 17.90
QQ
9.35 9.35 12.00 12.00 15.15 17.90
7. 7. 7. 7. 7. S.
Mfrr Mm*
ineh coupling tAtpta- shell ha supplied vlth two (2) rubber rings. Tho ring for th A/C wnl ohall ho of CO of tho proper olu am elaoo. Am riot for tho otool on! ahall ho at thorn boletn
Cwpllns Sie In.
6x1) 6x6 6x6 8x6 10 x 10 12 x 12
Stool KM Riot to ho aepp1**'1
li* Claao 100 KIOTO-Tire . std. Purchasing Spec.No.5036* CAS ring per Std. Purchasing Spoo. No .$31 6" CAS ring pr Std. Purchtaing Spec. Ko. S31 8* Sovor ring rorStd. Purchasing Spoe. Ko. 531 10" Sowar ring perStd. Purchsaing Spoe. Ko. 531 12" Sowar ring parStd. Purchasing Sppo. Ko. 531
Oil rsrtetent riup will bo supplied whan tpoeiriod ly tho custcur.
rtaai 1) Far asnattlwaljr oral otool plpo, field reworking of tho lg to tho Cs dlmnalon la pondttad. 2) Btataalaao aoi Mandate threaded and ccopied, block or galranisod otool plpo, schedule 10 throafh 160.
CTD012347
TECHNICAL SPECIFICATIONS
CertairifeedH
SPECIFICATIONS CLASSIFICATION;
A/C Standard Product Specification
T.C.O. REF. NO.
SPCCIFICATION NO:
PAOC NO.:
CertainTeed Corporation Pipe and Plastics Group
11
SUPERSEDES:
April
30,
1979
15B
23
OATE OF ISSUE:
^ 1 1982
DESCRIPTION:
A/C Bureau of Reelamation/Fluid Transmission Pipe, Couplings and Accessories
ELBOWS far Burou or LcTaiwtlcn Only
hftr to 3t.nd.rd Pipe,
6 nd 1, tor dlwnrlom not ehwn.
B.O.D."
Dlnonalons
PIpa
Slto, Inch.. ac 3Q iJS ic lio AC liS ACJO
6 7.06 7.06 7.16
e 9.12 9.26 9.26 S-Jt 9.38
10 11.U 11.Il 11.30 11.19 11.52
12 tj.tt 19.27 13-38 13.70 13.87
is111
K.X IS. 11 IS.11 15.78 15.95 I8.M 16.62 16.72 17.05 17.15
Id 18
IT.H 17.58 17.71 16.07 18.22 If.to 19.60 20.21 20.21 20. W
20 21
21j
>1.74 21.87 22.13 22.13 22.27
22.86 26.06
22.91 26.19
23.59
26.82
23.72 26.97
23.81 27.25
1" -0"
32.00 37.50 13.00 ti7.00 S3. SO 56.00 59.00 6!i. 00 69. SO 72.00 BO.00
AC 30
....
6.00 10.00 12.00 Hi .00 1S.00 16.00 18.00 20.00 21.00 7ll.00
I<D.* lion.
C_2 AC LO >0 liS
__
8.00 10.00 12.00 il. 00
15.00 16.00 10.00 20.00 71.00 ?l|.00
6.00 8.00 10.00
17 .CO 13.60
1S.00
IS. So 18.00
20.00 71.00 7li.00
6.00
8,00 10.00 12.01 Hi .00
lS.w
16.00 18.CO 20.00
71.00
71l.oo
AC so
6.00 8.00 10.00 17.00 111.00 IS.00 16.00 18.00 20.00 71.00 76.00
Sim. Inches
6 e
10 17
lit is 16
18 20 21 76
Pip. Sice
All All All All
Claasos
All All All All
Dorrcoa
u-i/6 27-1/7 30 6$
oc 22
S-S/8 11-1/6 IS 27-1/2
20C 25
11-176 22-1/2 . 30 6$
Harking!
___________ <
CntTAWTEED (D.gr.e) CL jilt.) (CUil) AC
RoUl 1. Xpcgr all adjoining nrfcer. Vmyi oxcoo* on lnsido for onooth rorf.c.. . *UiU for oil cl..*...
CTD012348
PRCPAREO BY!
02- 10-0023 (P927)
APPROVEO by:
R *O
MFO.
SALES
f Mr JJ2A12/76 CONFIG INTIAL DOCUMENT - NO*r TO BE D iSTRiBirr
I.E.
OTHERS
'Bodqe<ry: Branch
Far ftirou of uclmxtlw Only
Pago 24
RsduolnK Kiln
fon-Xediidnn foln
*T15
..
to. oo 56.oo ft .00
7?. 00 70.00 80.00 58.00 9*1.03 103.00 117.00
ACTS
JJ.M 24.46 2J.41
2}.)1 23.78 23.21
2*1.10 2*1.12 23.56
.9
>4
3?
V"
A1r..0l",j
-0.0" 7.4
65
.. to-do ~TiO.cn
63.00
63.00
68.00
56.00
56.00
56.00
66.00 66.00 66.00
72.00
72.00
72.00
76.00
76.00
76.00
80.00 FO.OO 80.00
83.00
M.OO
88.00
96.00
9^.00
76.00
100.00 100.00 100.00
112.00 112.00 112.00
Won^Floduclnfr Tee
AC 5o
60.00 68.00
56.00 66.00 72.00 76.00 80.00 08.00 96.00 100.00 112.00
Fitting
51m, Inches
6x6x6 8x8x8 10x10x10 12x12x12 liixiitxii
15x15x15 I6xlf-xl6 18x10x18 2*3x20x20 21x?lx?l
2i*x?la22j
Ifl" 10.06"
AC 33
nrpi
23.3/ 24,41
23.37 23.21 23.69 23.21 26.20' 26.06 23.56 26.80
22.47 13-37
26.35 23.31 23.22
23.66
23.16
23-93 23.61 23.20
26.59
At 63
22.47 23-32 26.27 23.15 2313 23.68 22.96 23-93 23-81 23.16 26.51
iff 53
22.42
2*36..3216
23.06 23.02 23.62 22.89 23.78 23.86 23.08 26.38
Pitting SI to, Inches
6x6x6 6x8x8 10x10x10 12x12x12 Uixllixllj
15x15x15 16x16x16 16x18x18 20x20x20 21x21x21 26x2lix26
It 35
26.00 26.00 32.00 36.00 38.00 60.00 66.00 6S.00 $0.00 56.00
U" kt 35 1C lb
20.00
26.00 26.00
28.00 28.00
32.00 32 .CO
36.00 36.00
38.00
60.CO
38.00 60.00
66.co 66.00
68.00 68.00
5o.oo 50.00
56.00 56.00
20.00 26.00
28.00 32.00 36.00 38.00 60.00
66.00 68.00 50.00 56.00
' "AC fo
20.00
26.00 26.0*0 32.00 36.00 38.00 60.00 66.00 68.00 50.00 58.00
r> in""*05~"ACTS'-"AC 65"'
-- 26.00 26.00 28.00 28.no 28.00 28.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00
31.00 33.no 31.00 31.05
32.00 32.00 37.00 32.00 32.00 32.00 32.00 32.00
36.00 36.00 36.00 36.00 35.00 35.00 35.00 35.00 35.00 3S.00 35-00 35.00 38.00 38.00 38.00 38.00
a4 5o
26.oo 28.00 30.00
30.00
31.00 32.00 32.00
36.00 35.00 35.00 38.00
CTD012349
TECHNICAL SPECIFICATIONS
SPECIFICATIONS CLASSIFICATION:
CertainTeedH
A/C Standard Product Specification
T.C.O. REF. NO.
SPCCIFICATION NO:
PAOE NO.:
CertainTeed Corporation Pipe and Plastics Group
1 1 158 25
SUPERSEDES:
April 30, 1979
OATS OF ISSUS:
FEB 1 1982
ocsckiption:
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
tor Biwmj or nsct/xmcm quit Non-.Vduclnr. To*
tn" 0.00* - 0.06"
AC JO nr 1CJ0 HE"" AC SO
19.66 22.66
25-61 26. n 29.66
31.21
36 .20 -
37.12 36.58 1.2.96
39.17 22.1,1
25-37 28.21 29.59
31.03 36-20
37.12 38.56 1.2.56
16.1,7 39.37 22.35 25.31 28.22 29.59
33.03
33.93 36.81
33.11, 1,2.59
16.1,7 19.32 22.27
25.15 28.13 29.1,8
31.01
33.93 36.81 . 38.ll, 62. S9
16.62
19.31 22.26
25.12 20.07 29.32 30.89 33-76
36.72 38.08
62.38
Pitting Slr.e, Incl.es
6x8x8 10x10x10 12x12x12 16x16x16 15x15x15 lrtxlfodrt 18x18x18 20x20x20 21x21x21 26x26x26
AC 30
mm 26.56 33.56 38.59 63.69 66.32 68.79 53.80 58.88 61.62 69.06
IS* *0.06" >0.00* ACJi AS LQ AC 19
..
28.63 33.59 38.66
63.79 66.61
68.97 53.80 58.88 61.lilt 69.06
23.53 28.63 33.65 38.69 63.78
68.97 56.07 59.19 61.66 69.61
23.53 28.63
33-73 38.65 63.68
66.53 69.00 56.07
59.19 61.86 69.61
AC 50
23.58 28.69 33.76 38.88 63.56 66.68 69.11 56.22 59.28 61.92 69.63
-urx~-JTW~
7.0.1 Ic T.D.2 " Non.
~re~Es~ AC 16
__
6.00 10.00 12.00 JM.0C iS.oo 16.00 18.00 20.00 21.00 26.00
8.00 10.00 12.00 lli.OO iS.oo 16.00 18.00 20.00 21.00 21,.00
6.00 8.00
10.00 12.00
13.60
iS.oo 3S.50 18.00
20.00 21.00 21,. 00
6.oo 8.oo 10.00 12.00 lt.oo
iS.oo 16.00 18.00 20.00 21.00 26.00
AC 56
6.00 8.00 10.00 12.00 16.00 IS.oo 16.00 18.00 20.00 21.00 26.00
Fitting Sire, Znehoa
6x6x6 8x8x8 10x10x10 12x12x12 16x36x16 15xl5xl5 16x16x16 18x18x18 20x20x20 21x21x21 26x26x26
B.0.D.1" ic B.0.D.2" Kin.
xc~yr
xtrro --W6V 1 "1C10
9.12 11.16 13.26
15.38 16.66
17.58 19.60 21.76 22 .Sit 26.08
mm
9.26 II.IB 13.27 15.66 16.62 17.58 19.60 21.87 22.91 26.19
7.06
9.26 11.30 13.38 19*<<4
16.72 17.71 20.21 22.1*5 23.59 26.82
7.06
9.36 11.69
13.70
15.78
17.05 18.07 20.21 22.1,3 23.72
26.97
7.16 9.38 n .$2 13.87 15.95 17.15 18.22 20.<16 22.27 23.36
27. 5
CTD012350
PREPARED BY:
APPROVED BY:
R * O MPO.
SALES
I.K.
OTHERS
Gltt J.6A-
\IO-O023 (P927) iz/ji CONFIDENTIAL DOCUMCNT - NOT TO BE DISTRIBUTCD TO UNAUTHOflIZ1D PERSONNEL
ACJO
iiQ.OO
liS.oa $6.00
W.oo $6.00 611.00
18.00 $6.05 68.00 7?. 00
118.00 $6.00 611.00 72.03 76.00
77.00
78.7$ 78.00
>5.7$ JO.7$
79.7$
J1.00 31.00 jo.so 79.7$
31. $0 31.7$ 31.$0 30.7$ , JO.SO
AC 30
9.18
9.18
11.10
9.18 U.10 13.70
9.18
11.10 13.70 1$.1jO
9.18
11.10 13.70 l$.8o 16.46
Aw y) e.oo 10.00 17.00 i8.cn i$.oo 16.00
AC JO
6.00 10.00 17.00 18.00 15.01
t* 1.0* *0.0''
AC 3$
Ad 8$
..
--
88.00
--
88.00 $6.00
..
88.00 $6.00 68.00
..
88.00 $6.00 68.00 72*00
..
88.00 $6.00 68.00 72*00 76.01
80.00 80.00 88.00
80.00 86.00
$6.00 80.00 80.00 S6.00 68.00 80.00 88.00 $6.00 68.00 72.00
80.00 88.00 $6.00 68.00 72.00
76.00
80.00 80. CO 80. co 80.03 8B.00 $6.0.7 .80.00 88.0-1 $4.00 68.00 80.00 80.00 $6.00 68.00 72.00 80.00 88.00 $6.00 68.00
72.00 76.00
Undue! Te row BinAircrrT v.,teTi(w am
FiUinr inn Six*, Inch** AC 30
80.00 80.00 88.oo 80.00 88.00 $6.00 80.00 88.00 $6.00 68.00 80.00 88.00 S6.00 68.00 72.no 80.00 88.00 56.00 68.00 72.00
76.00
0x6r-'t 10*10x6
10*10*0
17*17*6 17*17x8
12x12x10 lljxl hxf'
18x18x0 i8xi8*:o
18*18*17 1$*1$*6
1Sxl$*8 lSxlSxlo l$xl$x!7 l$*l$xl8
16x16x6 16x16*3 16x16*10 16*16*17 1/xl6xlli
16x16x1$
78.00
..
78.00
78--.00
78.00 78.00 37.00
..
78.00 78.00 37.03 36.00
..
78.00 78.00 3?.00 36.00 38.00
Page 26
1A * iJl acIo
-- 20.00
70.00
28.00 28.00
70.00
78.00 28.00
28.00
--
28.00 20.03
?I|.00 28.00
78.00 20.00
32.00
--
32.00 70.00
28.00 28.00
73.00 20.00
32*00 32.00
36.00 35.00
.. 20.00
78.00 28.00
23.00 28. CO
32.00 32.00
36.00 36.00
33.00 38.00
AC li$
20.03 20.00 28.00 20.00 28.00 28.00 20.00 28.00 78.00 32.00 70.00 28.00 28.03
32.00 36.00 20.00 78.00 28.00 32.00 36.00
38.00
c ft
20,00 20.00 28.03 20.00 28.00 2e.oo 20.00 78.00 28.00 32.00 20.00 78.00 23.03 32.(0 36.00 20. CO 78.03 23.CO 32.00 36.CO 38.00
-- -- 27.00 _
?8.75 28.00
.. VJ.25 10.7$ 29.2$
31.00 31.00 30.50 79.7$
_
31. $0 31-7$ 31.50 30.2$ 3O.S0
r*
Ad 86
26.00 27.So 27.00 29.00
78.7$ 28.00 30.cy> 10.7S 30.7$ 79.2$ 30.S0
31.00 31.00 30. $0
29.7$ 31.2$
31.$0
31.7$ 31. $0 30.2$ JO.SO
AC Ii5
26.00 27. $0 27.00 29.00
28.7$ 28.03
30.00 30.25
30.75 29.75 30.50 31.00 31.00
30.50
29.75 312$
31 .SO 31.7$ 31 .$0 30.2$ 3O.S0
15" ,0V*, -.01"
AC it
--
9.28 -
9.28 11.20
..
9-20 11.20 13.29
-- 9.28 11.20 13.29 IS.60
..
9.28 11.20 13.79 IS.60 16.61.
AC 80
7.08 7.08 9.78 7.08 9.28 11.32
7.00 9.28
11.32 13.80
7.08 9.28
11.32 13.80 1S.S8
7.08 9.28
11.32 13.80 IS.$8
16.74
ac 8$
7.08 7.08 9.38 7.08
9.38 11.88
7.08 9.je 11.86
13.72 7.08 9.38
11.88
13.72 IS. 77
7.08 9.38 11.88
33.72 IS.77 17.07
i. iMMIcn. AC
8.00
10.00 12.00 18.00
IS. 00 16.00
8.00
10.00 17.00 3 3.60 15.00 35.SO
Ac 85
O.oo 10.00 17.00 18.00 15.00 16.00
AC 50 26.00 27. SO 27.00 29.00 28.7$ 28.00 30.00 30.2$ 30.7$ 29.25 30. $0 31.00 31.00 Jo.So 29.7$ 31.2$ 31. $0 31.7$ 31.53 30.2$ 30. $0
7.11 9.60 II.56 7.8 9.60 II. sa
13.0
7.18 9.AO II. SA 13.89 15.97 7.18 9.AO 11.56 13.89 15.97 U.17
AO $0
8.00 10.00 17.00 18.00 IS.00 16.00
Fitting Site, Inchea
10x10x6 10*10x8 12x17x6 12x17x8 12x12x10 lliXl lhxlhxft 18x18x10 18x18x12 l$xl$x6 iSxlSxd lSxlSxlo l$xl$xl2 lSxlS*l8 16x16x6 16x16x6 16*16x30 16*16x32 16*16*18 16*16*1$
Ac 36
__ ..
22.00
22.7$ 22.00
23.2$ 23.2$
2_2_.2$
23.SO 23. $0 23.00 22.2S
23.SO 23.7$ 23.$0 22.2$ 22. $0
LC 1.2$" JT AC 8-3
22.03
-- 22.50
2.2...00
22.00 23.00
22.7$ 22.00
22.75 22.00
23.00
73.2s 73.25
23.2$ 22.2$
23.25 22.2$
23.00
23. $0
23.$0 23.00 22.7$
__
23.50 2J.S0 23.00 22.2$
23.2S
23. SO 23 .$0
23.75 23.7$
23.50
22.25 22.50
23.50 22.2$
22.50
CJ
22.00 22.50
22.03 23.00
22.7$ 22.00 23.00
23.25 23.25 22.2$ 23.00 23.SO 23.SO 23.00 22.2$
23.2$ 23 .SO 23.7$ 23.50
22.2$ 22.56
22.03
22. SO
22.00
23.00
22.7$ 22 .CO 21.00
23.25 23.2$ 22.2$ 23.00
23.$0 23.$0 23.00 22.2$
23.2$ 23.50 23.7$
23.SO 22.2$ 22.$0
fitting Site. Inches
8x6x6 10*10*6 10x10*8 12*12x6 12x12x8 12x12x10 liixllix6 18x18x8 18x18x3.0 18x38x12 15xl$x6 l$xl5x8 15*15x10 1 Sxl5x12 15xl$xl8 16x16x6 36*16*8 16*3 6*30 16x16*12 16x16*18 16x16*1$
ii.in $Sta, Inches
8*8 10x10 17*12 18*18 15x1$ 16*16
*lf existing core drills are not the proper size, machine branch end to fit or use oversize stock, as the situa tion warrants.
Adjn
Ml II.It l|.IA 15.38 15.AA 17.58
n.0.0.1 -wKi;inr.~ '"lire;" "H2
9.16 11.10
13.17 15.AA
16.61 17.58
9.16
II.K 11.je 15.H 16.71 17.71
*36
II..9 11.70 15.78
17.05 11.07
938 II. St
13.17 15.95 17.15 18.12
I. n.?" Nn.*.
Ad }>;--ITJ-Ko--""lew--itrw
..
6.'V
fi.cvj
6.00
8.00
8.00
8.00
8.00
10.00 10.00 10.00 10.00
12.00 12.00 12.00 12.00
18.00 13.60 18.00 it.00
1S.00 15.00 15.00 15.00
Prw1l Site, Inches
6
8 10 12 18
IS
R.o.n..7" Min. irryi--in; EQTiHf-
.. 7.01 T3
9.12 ii.it 1).2t
15.38
9*26 ii.ie
13.17 15.AA
16.61
9.16 11.10 11.18 16.AA
14.71
!.* 13.70 15.78
1T.0S
AC $0
M8' 5-38 ll.$t 11.87 l.*S 17.18
TECHNICAL SPECIFICATIONS
CertairileedEI
SPECIFICATIONS CLASSIFICATION:
A/C Standard Product Specification
T.C.O. REF. NO.
SPECIFICATION NO:
FADE NO.:
CertainTeed Corporation Pipe and Plastics Group
10
supersedes:
January 16, 1978
15B 27
DATE OF ISSUE:
APR 3 0 1979
description:
A/C Bureau of Reclamation/Fluid Transmission Pipe, Couplings and Accessories
Type 25, 3" and 4" Direct Tap Couplings
-L-
See Note #2
Drill Sire for 3" Direct Tap Coupling 3.25" Drill Sire for 4" Direct Tap Coupling - 4.25"
B.O.D." Min.
Harking Example:
CERTAINTEED (3" or 4") DIRECT TAT CPLG
(Sire) FT (Class) AC FLUID TRANSMISSION
Sire" Class
3035
8
11.27 11.27
10
13.83 13.83
12 14
16.19 18.63 16.19 18.63
15
19.83 19.83
16
20.95 20.95
18
23.13 23.13
20
25.46 25.46
21
26.72 26.72
24
30.15 30.15
Sire" Class
30 35
8
8.00 8.00
H" +0.,00" -0. 06"
10
8.00 8.00
12
9.00 9.00
14
9.70 9.70
15
9.70 9.70
16
9.70 9.70
18
10.70 10.70
20 21
10.70 10.70 10.70 10.70
24
10.70 10.70
Sire" Class
30 35
8
11.50 11.50
10
11.50 11.50
L" + 0.06"
12
12.50 12.50
14
13.50 13.50
15
13.50 13.50
16 18
13.50 14.50 13.50 14.50
20
14.50 14.50
21 24
14.50 14.50
14.50 14.50
Notea: 1. For dimension* not shown, refer to Standard Coupling dimension*
2. Counter bore each tap to a depth chat allows the first full thread engagement. Use a 3.5" counter bore for a 3" tap, and a 4.5" counter bore for a 4" tap.
J. Use KPT (ITT) thread*.
CTD012352
PREPARED BY:
APPROVED BY:
vA
R *D
MFO.
SALES
I.E.
OTHERS
02- 10-0023 (P927) 12/76 cowinpaK^L jjjgpua^T - not to at DisfwtyuTap'TO u^Uthowiho eawaotiHP.
Page 28
Rubber Rings
CUJPIIM3 RgTlUCBRS - fWTD ro^S^TSSIC* TO nUIIl TRANSMISSION
for nifip raxtiaQ3Sia< cmt "
Harkins
Each coupling r'v
ohi21 l*e supplied with one (l) rubber ring of the
appropriate cip-js corrspomi3nc with tne coupling airio. An oil resistant
ring will bo supplied whan specified by the purchaser.
CeftTAfNTrCD Civil
(Sire) FT - (Size) FT J'l.U ID-TIl'\r.'.MISSION
Reducer Sli*. In.
t" + .063*'
All Classes
V t .13** All Classes
Non. T. D. "
Classes Cl-isscs Classes Classes
2C-35
4G-45
50-60
70-90
C1 o > * t- s 30-35
B.0.D, Min.
Clamcs C)ASScs
40-43
50-60
Classes 70-90
8 to 6 10 to 6 12 to 10 1* to 12
15 to 14 16 to 14 16 to 15 16 to 15 20 to 13 21 to 20 26 to 71
6.50 6.50 7.CO 7.75 6.CO 8.GO 8.00 5.00 10.CO 10.CO 10.00
3.SO 3,50 3.50 4.CO 4.50 4.50 4.50 4.50 5.00 5.CO 5.00
_
8.70 10.60 12.70 14.50 14.50 15.50 16.80 19.00 21.CO 21.80
6.60 8.70 10.60 12.70 14.90 14.90 15.90 16.60 19.60 21.CO 25.00
6.SO 9.00 11.CO n. ?o 15.00
IS.30 15.SO 17.40 19.60 21.00
*
6.30 9.00 U .50 n.co 15.00 15.50 IS.so
-
-
-
11.18 13.27 15.44 17.60
17. $4 1C. 40 19.80
21.7? 24.01 26.08
(class 50 only)
@ (class 70 only)
9.36 11.49 13.70 15.78 18.20 18.20 19.51 20.42
23.20 25.66
26.S3
17.00
19. eo 19.80 21.02 22.2S 24.79 21.01
1V1S 17.90 21.06 21.06 21.52
__ --
-*
te: A) For machining dimensions not shown refer to standard pipe and coupling this t peclfication. B> I.D. subject to manufacturing tolerances, machining of I.D. not requited on pipe side. C) Physical Heaulrcnencs - Coupling Reducer shell be designed to sect the hydrostatic teat requirem of the appropriate class.
CTD012353