Document MG9jV2aLXVVX9NxZJ71zbbOy9

instruction, wrapping or printed insert was placed in the con tainer, package, or carton; (j) whether or not you have in your possession or under your control samples or exemplars of (1) each container, package, or carton; (2) each printed material or trademark appearing thereon; or (3) each written instruction, wrapping or printed insert mentioned in your responses to (g), (h) and (i) above; (k) Did you place edge codes on the asbestos-containing products you manufactured, and if so during what period of time? RESPONSE No. 7: 1. DRUM BRAKE LINING SEGMENTS (No. 9, 1(a) and 1(c)) (a) Drum brake lining segments With trade names of Inlite or Delco; (b) (i) 1939; (ii) 1939; (iii) Manufacturing of this product has not ceased. Sales of these drum brake lining segments as separate replacement parts was discontinued in 1979; (iv) Not applicable; (c) The type of asbestos used in these parts is chrysotile. The percentage of chrysotile asbestos used is in a range of approxi mately fifty to seventy-five percent. The grades utilized were: 5K04, 5R, 6CZ, 6D, 6-D-3, 6D-04, 7D, 7-D-3, 7D-4, 7D-04, 7H2, 7J19, 7K, 7K-05, 7M2, 7MF, 7MS7; (d) Drum brake lining segments consist of a curved, dense, grayish material. Typical lengths are 7 7/8, 9 1/2, 11, 12 and 12 1/2 inches. Typical widths are 1 3/4, 2, 2 1/4, and 2 1/2 inches. Various colored paint stripes were utilized on the edge of 12 -