Document M47vb06gyan4w1QrXJE7nndOx
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
January 19, 1977
TO:
Mr--M-A---Palmowski-^r^JlhjLc-ag^
Hr--G.--F. FOWlui - Marjrfrtrfra
Mr. E. L. Aasun - lorrtland
-Ms-.
Dixon - Portland
Mr . J . "Van - Pcrrtlead
.Mr A J Potralinc-------Wi-l-mingt
Mr. J-. B-; Moss --Willuington--
-Mi ;~C. -W. Lebnexggt 'TTcirrd
Tigard Lab
Please find enclosed the following Chicago, Illinois Plant Formula revisions:
C-903 C-923 C-933 C-953 C-970 C-973 C-974 C-976 C-978 C-979
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS) READY MIX FILLER READY MIX JOINT COMPOUND (HAND TOOLS)
REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED
Please sign and ret .rn the attached tear sheet.
TO: TIGARD GYPSUM AB
C-903 C-923 C-933 C-953 C-970 C-973 C-974 C-976 C-978 C-979
TRIPLE DUTY JOINT COMPOUND BEDDING COMPOUND TOPPING COMPOUND ALL PURPOSE JOINT COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS) READY MIX FILLER READY MIX JOINT COMPOUND (HAND TOOLS)
REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED REVISED
SIGNED -Mo
WNG
________________ PLANT
DATE
SGP 0017931
I
GP 51
GEORGIA-1
FIG CORPORATION
ROUND TRIP LETTER
WWW
WWW flaw
w SGP 0017932
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
May 4, 1977
TO:
-Mr-r-ttr-A-r plrr^GV FvFrrwter-------Marietta
Mr--E--LT~A~a?e fr-^-pcrr rTarrd--
Msv
MrT^AT H
---------------------
:on
Tigard La^r >-- Mr7~ET~B. Hollingsworth-------WiLmi-ng-ten
Enclosed please find the following NEW Chicago, Illinois Plant Formulas:
C-952 C-934
ALL PURPOSE COMPOUND TOPPING COMPOUND
NEW NEW
The following Chicago, Illinois Plant Formulas have been Cancelled:
C-936 C-956 C-970 C-973 C.-974 C-97 6
TOPPING COMPOUND ALL PURPOSE COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS)
CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED
Please sign and return the attached tear sheet.
TO: T GARD GYPSUM LAB
C-952 C-934 C-936 C-956 C-970 C-973 C-974 C-976
ALL PURPOSE COMPOUND
TOPPING COMPOUND TOPPING COMPOUND ALL PURPOSE COMPOUND READY MIX FILLER READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS)
NEW NEW CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED CANCELLED
SIGNED -MJ- - n.-
WNG/gvp 5/4/77
PLANT
DATE .?/v/72.
SGP 0017933
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
November 24, 1976
-Mr-i--K, --W. Brown----Aewe Mrr--^7-TT--FOTdrer------Marietta Mjw-E.-T-- Aaiifln - Portland Me R 1- Dixon -^Portland
-Mr. J . Van----Per-Hrartd-M-r-. J. 15'; Mo a a------ Wilmington Mr. A. J. Petra-line - Wilmington
:. W Lchne rt Tigard Lab^S$--
Enclosed please find the following Acme, Texas Plant Formula Revisions:
TEX-973 TEX-974 TEX-976
READY MIX FILLER READY MIX FILLER READY MIX FILLER (FILLER "X")
REVISED REVISED REVISED
Please sign and return the attached tear sheet.
TO; TIGARD GYPSUM LAB
TEX-973 TEX-974 TEX-976
READY MIX FILLER READY MIX FILLER READY MIX FILLER (FILLER "X")
REVISED REVISED REVISED
SIGNED WNG
PLANT
DATE /Z-"/ "7L
SGP 0017934
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
March 24, 1976
TO:
'Mi . EvL. Aaseu - PuiiIcUkT Ms. R. L~Drx'uir - PoiLlgTTd
rirrrrtTtg^oiv-
WllUlillgLun
Mr-:--C . M; Lchvie r.L
rwm-
Tigard Lab
this co pV fof. <
Enclosed please find the following Chicago, Illinois plant formula revisions:
C-970 C-974 C-976
READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS)
REVISED REVISED REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAB
C-970 C-974 C-976
READY MIX FILLER READY MIX TOPPING COMPOUND (HAND TOOLS) READY MIX JOINT COMPOUND (HAND TOOLS,
SIGNED [O' ?/. Cf, WNG
PLANT
REVISED REVISED REVISED
DATE 3/2
SGP 0017935
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
July 21, 1976
TO:
-Mrr~MT
-&g-r--&. r . F&wl^c- -Ma-i i-o t ta
Mr-:---:--It:--Aa'serr-- Mb. R. L. Dixuir~- FortLaird-
Por-t-lemeL
Jben lie r Tigard La
on
/.i
Enclosed please find the following Chicago, Illinois Plant Formula revisions:
C-970 C-976
READY MIX FILLER READY MIX JOINT COMPOUND (HAND TOOLS)
REVISED REVISED
Please sign and return the attached tear sheet.
TO: TIGARD GYPSUM LAR
C-970 C-976
SIGNED
WNG
READY MIX FILLER READY MIX JOINT COMPOUND (HAND TOOLS)
U1JL
PLANT
REVISED REVISED
DATE
SGP 0017936
GEORGIA-PACIFIC CORPORATION GYPSUM DIVISION TIGARD, OREGON
October 31, 1975
FOR:
-Mr .~M. '~~Av~Pa'lmuwstei' - Chicago Marietta
Mr. E. "L. 'Aa'sen - Portland--Lr--Bix-on-----Portland
Mr-,--J-r--Van----- Portland Mrv-A-r--J. Petral-i n e~- _Wi Imi-ngton Mr-r J. B. Mo"SU' - Wilmington Mr-.--O-r-AVrd^rhnert----- Trgard Tigard Lab
Enclosed please find the following Chicago, Illinois Plant' Formula revisions:
C-971 C-976
READY MIX JOINT COMPOUND (HAND TOOLS) REVISED READY MIX JOINT COMPOUND (HAND TOOLS) REVISED
Please sign and return the attached tear sheets.
TO: TIGARD GYPSUM LAB
C-971 C-976
READY MIX JOINT COMPOUND (HAND TOOLS) REVISED READY MIX JOINT COMPOUND (HAND TOOLS) REVISED
SIGNED WNG
C/
/. PLANT
DATE / //
SGP 0017937
December 8, 1967 NEW FORMULA
CHICAGO. ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-976 (MACHINE TOOLS) (READY MIX "X")
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering cape, filling cornerbead and spotting nails.
FORMULA naw Material
Source
7, Act. Ingr.
Lbs. /Patch
Water
Nalco 71-D5 Filler C-971 Elvacet 81-900 Benzoflex 50
Chicago Plant
Nalco Chemical Co. Chicago Plant DuPont Tennessee Products Chem.
-
0.10 91.40
8.00 050 100.00
433.0 (52 gal.)*
0.8 700.0
61.5 4.0
1199.3**
''Approximately 56.5 Ib./lOO lbs. of active ingredients (this may vary -r 2 gallons per batch).
**One batch yields 18 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pail.
TESTING PROCEDURE
WORKING CONSISTENCY - Refer :o Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper wonting cor.iiitency, a maximum of 5 cc water per 150 gra.v.j of paste may be added to adjust.
Drabencer - 230 50
WORKING PROPERTIES Specifications:
Eefe- to Plant Testing procedure No. 33. Compound snail be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Plaster shall be free from lumps due to incomplete mixing.
PONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear when delaminated.
CRACK RESISTANCE Specifications:
Refer to Plant Testing Procedure No. 37. There snail be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Spec ifications
White Dried compound shall match color of standard sample.
uk t
SGP 0017938
May 8, 1968 Supersedes Formula No. C-976 Dated 2/28/68
CHICAGO, ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-976 (MACHINE TOOLS) (READY MIX "X")
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting nails.
/ FORMULA Raw Material
Water
Filler C-971 Elvacet 81-900
(Poly Vinyl Acetate Emulsion) Benzoflex 50
Function Solvent Body
Adhesive Plasticizer
R.M. Spec. -
Percent -
91.44
Lbs./Batch
1156.5 (139 gal.)*
1946.0
185
8.04
171.0
183
0.52
11.1
100.00
3284.6**
*Approximately 56.5 lbs./lOO lbs. of active ingredients (this may vary + 2 gallons per batch).
**One batch yields 50 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs./pa'll.
WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust
Brabender - 385 + 20
WORKING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Material should be free of lumps due to incomplete mixing.
BONDING PROPERTIES Specifications:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 757. fiber tear shen delaminated.
CRACK RESISTANCE Specifications:
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications:
White Dried compound shall match color of standard sample.
-/ Denotes change in this reissue.
RRB:kkt
SGP 0017939
July 30, 1968
Supersedes Formula No. C-976 Dated 5/8/68
CHICAGO, ILLINOIS PLAN? FORMULA READY MIX JOINT COMPOUND C-976 (MACHINE TOOLS) (READY XIX "X")
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, covering tape, filling comerbead and spotting nails.
FORMULA Raw Material
Function
R.M. Spec.
Percent
Lbs./Batch
Water
Filler C-971 Elvacet 81-900 _
(Poly Vinyl Ace tate Emulsion) Benzoflex 50
Solvent. Body
Adhesive Plasticizer
91.44
1082.5
(130 gal.' 1750.0
185
8 04
153.0
183
___0^ 52
10.0
100.00
2995.5
*Approximately 56.5 lbs./lOO lbs. of active ingredients (this may vary + 5 gallons per batch).
**One batch yields 45 (+) 65.6 lbs./pail.
5 gallon pails of Ready Mix Joint Compound at
WORKING CONSISTENCY - Refer to Plant Testing Procedure No. 32. Specifications for Paste: If paste is not proper working consistency, a maximum o 5 cc water per 150 grams of paste may be added to adjus
Brabender - 385 + 20
WORKING PROPERTIES Specifications:
- Refer to Plant Testing Procedure No. 33.' Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Material should be free of lumps due to incomplete mixing.
BONDING PROPERTIES Specifications;
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show c : least 757. fiber tear when delaminated.
CRACK RESISTANCE Specifications:
. - Refer to Plant Testing Procedure No. 37. ' There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR Specifications;
- White Dried compound shall match color of'standard sample.
-/ Denotes change in this reissue.
RR:kgc
SGP 0017940
May 27, 1970 Supersedes Formula No. C-976 Dated 7/30/68
CHICAGO, ILLINOIS PLANT FORMULA READY MIX JOINT COMPOUND C-976 fMACHINE TOOLS) (READY MIX "X")
DESCRIPTION OF PRODUCT
- White Ready Mix Joint Compound used for taping, covering tape, filling cornerbead and spotting , nails.
-/ FORMITA Raw Material
Function
R.M.Spec.
Percent
Lbs/Batch
Water
Filler C-971 Elvacet 81-900 (Poly Vinyl Acetate Emulsioi.) Benzoflex 50
Solvent Body
Adhesive Plasticizer
185 183
92.00
1082.5 (130 gal.)*
1750.0
7.5C .50
100.00
142.5 9.5
2984.5**
* Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 5 gallons per batch).
** One batch yeilds 45 (+) - 5 gallon pails of Ready Mix Joint Compound at 65.6 lbs/pail.
WORKING CONSISTENCY:
-
Specifications for Paste:
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5cc water per 150 grams of paste may be added to adjust.
Brabender - 385 + 20
WORKING PROPERTIES: Speci ricacions:
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, butt' rv working, and
free of any coarse, gritty or unc aspersed particles Material should be free of lumps due to incomplete mixing.
BONDING PROPERTIES: Spec ifica tions:
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75% fiber tear when delaminated.
CRACK RESISTANCE: Specifications:
Refer to PlantTesting Procedure No. 37. There shall be no large fissure cracks in the wedge and no cracks in the thinner half of the wedge.
COLOR: Specifications
White Dried compound shall match color of standard sample
-/ Denotes char.gein this reissue. ED0:dek
SGP 0017941
March 8, 1974 New Formula C-976
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA
Raw Material
Water Nalco Elvace 1875 Filler C-97S
Function
Percent
Solvent Anti-foaming agent
Adhesive Filler
-- 0.1
5.0 94.9
100.0
Lbs/Batch
1024.00 2.00
105.00
1992.00
(128
gals.)*
3123.00**
^Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**0ne batch yields 97+1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency,
a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (5&0 + 20) For machine tools add 10 gallons H2O. (400 + 20)
WORKING PROPERTIES 6 t>ec if i cations
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undis persed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
White
Dried compound shall match color of standard sample.
WNG:jg
SGP 0017942
March'25, 1974 Supersedes Formula C-976 Dated 3/8/74
CHICAGO, ILLINOIS, PUNT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA
Raw Material
Water Nalco Elvace 1875 Filler C-978
Function
Percent
Solvent Anti-foaming agent Adhesive
Filler
-- 0.1 5.0
94.9
100.0
Lbs/Batch
1024.00 (128 gals.)* 2.00
103.00 (11.2 gals. ) 1950.00
3079.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary + 8 gallons per batch.
**0ne batch yields 50+1 five gallon nail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications. " for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not' proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 + 20) For machine tools add 10 gallons H2O. (400 + 20)
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undis persed particles. Material shall be free from lumps due to incomplete mixing.
PONDING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90fo fiber tear when delaminated.
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
White
Dried compound shall match color of standard sample.
WNG:jg
SGP 0017943
October 31, 1975 Formula Supersedes:
NEW
C-976
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
/ DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing. For shipment to Eastern market areas.
FORMULA Raw Material
Function
Percent Lbs/Batch
Water Nalco
Airflex 510 Filler C-970
Solvent Anti-rfoaming agent Adhesive Filler
-- .1
5.0 94.9
loo.o
1080.00 (130 gals.)* 2.00
103.00 (ll'.5gals.) 1950.00
3135.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 50 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. ` If paste is not proper working consistency,
a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: ( 5&0 i 20) For machine tools add 10 gallons H2O. (400 1 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35.
After compound has dried, tape shall show at least 90# fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNGselz
-/ denotes change
SGP 0017944
October 31, 1975
Formula Supersedes:
NEW
C-976
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
-/ DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing. For shipment to
Eastern market areas.-
FORMULA Raw Material
Function
Percent Lbs/Batch
Water Nalco
AirfLex 510 Fille'r C-970
Solvent Anti-foaming agent Adhesive
Filler
-- 1080.00 .1 O 2.00
5.0 idj, 103.00
94.9 14501950.00
(130 gals.)* //$-
(li.5gals.)
100.0
3135-00** kzS'.Qd
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 50 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 20) For machine tools add 10 gallons H2O. (400 i 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35.
After compound has dried, tape shall show at least 90^ fiber tear when delaminated.
CRACK RESISTANCE Speci 1'i cat i on s
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNGrelz
-/ denotes change
SGP 0017945
October 3-iv~L9Z5'
Formula Supersedes:
-NEW-
i&/'://
C-976
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
-/ DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing. For-shipment- to /i.v. -/
Ea stem- market-areas.,
FORMULA. Raw Material
'` ' ( Function '
Percent Lbs/Batch
Water Nalco
AirfLex 510 Filler C-970
Solvent
-- 1080.00 (130 gals.)*
Anti-foaming agent
.1
2.00 / <> o
Adhesive-
& t1-03--. 00 (liv^gals.)
Filler
' '--9--4.9--- I' Q' ^" n.oo Jilff.-iY^-s
100.0 -3135.00** --
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary
8 gallons per batch.
-I tb /
**0ne batch yields
five gallon pail Ready Mix joint compound
at 62 lbs/pail.
WORKING CONSISTENCY Specifications
for Paste
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 20) For machine tools add 10 gallons H2O. (400 i 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33.
Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35* After compound has dried, tape shall show at least 90fo fiber tear when delaminated.
CRACK RESISTANCE Spe cifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNGielz
-/ denotes change
SGP 0017946
February 12, 1976 Supersedes Formula C-976
Dated 10/31/75
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
/ DESCRIPTION OF PRODUCT
White Ready Mix Joint Compound used for taping, topping, and texturing. Airflex loading to be reduced to 5$ (103 lbs/batch) April 1, 1976.
/ FORMULA Raw Material
Function
Percent Lbs/Batch
Water
Nalco Airflex 510 Filler C-970
Solvent
Anti-foaming agent
Adhesive
-
Filler
.1 6.0 93.9
1080.00 (130 gals.)* 2.00
124.00 (14.0 gals.)
1950.00
100.0
3156.00**
*Approximately 56.5 lbs/lOQ lbs. of active ingredients (this may vary 1 8 gallons per batch.
/ **0ne batch yields 51 i 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.'
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 20) For machine tools add 10 gallons H2O. (400 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90# fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks, in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG:jg
-/ denotes change
SGP 0017947
2.S , F.etHHiari`yi,i'li,2,7' 1-9-76-- Supersedes Formula C-976 Dated 3-6-/31/75-
2./ / l/ 7i>
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
/ DESCRIPTION OF PRODUCT
/ FORMUI Raw Material
White Ready Mix Joint Compound used for taping, topping, and texturing. Airf-l-ex-loading tx>--be.
rsduoed to 5$ (103 1-bo/batch-)-April-1 ,--l-97t>.
Function
Percent Lbs/Batch
Water
Nalco Airflex 510 Filler C-970
Solvent Anti-foaming agent Adhesive
Filler
-- .1
6.0
93.9
100.0.
1080.00 2.00
124.00
1950.00
(130 gals.)* (14.0 gals.)
3156.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary gallons per batch.
**0ne batch yields 51 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (5&0 20) For machine tools add 10 gallons H2O. (400 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed
particles. Material shall be free f-^orn lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks, in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG:jg
/ denotes change
\
SGP 0017948
March 23, 1976
Supersedes Formula C-976 Dated 2/12/76
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
-/ DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA Raw Material
Function
Percent Lbs/Batch
Water Nalco Airflex 510
Filler C-970
Solvent Anti-foaming agent Adhesive
Filler
-- .1
6.0
93.9
1080.00 2.00
124.00
1950.00
(130 gals.)* (14.0 gals.)
100.0- 315 >.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 6 gallons per batch.
**0ne batch yields 51 1 1 five gallon pail Ready Mix joint compound
at 62 lbs/pail.
"
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 i 20) For machine tools add 10 gallons H2O. (400 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be f 'ce from lumps due to incomplete mixing.
BONDING PFOPERTIES Specifications
- Refer to Plant Testing Procedur No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks, in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG: gvp
-/ denotes change
SGP 0017949
;L'i l MaTCTi~23, 1976 Supersedes Formula C-976 Dated 2fttTt-----
3h
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
-/ DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA Raw Material
Function
Percent Lbs/Batch
Water Nalco --/ A-irfiex--510 c~LO^o'^
Filler C-970
f?7b
Solvent
-- lOSO.OO (130 gals.)*
Anti-foaming agent
.1
2.00
Adhesive
.</ 6r0 ' /3Y ISWrrOG- (14-^0-gais. )
Filler
-t -93^-9
1950.00
ioo.o. y&&-. oo**
3;
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 51 1 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 1 20) For machine tools add 10 gallons H2O. (400 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37* There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG: gvp
-/ denotes change
SGP 0017950
July 21, 1976
Supersedes Formula C-976 Dated 3/23/76
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA Raw Material
Water Nalco
-/ Elvace 1875
-/ Filler C-970
Function
Percent Lbs/Batch
Solvent Anti-foaming agent Adhesive Filler
-- .1
6.4 93.5
1080.00 2.00
1 34.00
1950.00
(130
(15.0
gals. )*
gals.)
100.0. 316 6.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 51 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of
paste may be added to adjust.
Brabender: (580 1 20) For machine tools add 10 gallons H2O. (i00 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material snail be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks, in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG: gvp
-/ denotes change
SGP 0017951
AJ . 1 7 I ! 6 7 7
July^-gl r-497iL_ Supersedes Formula Dated 3/23/76
'7/1 / /-;^
C-976
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA Raw Material
-/Water Nalco
-/ Elvace -18-75
Filler C-970
t oo
Function
Percent Lbs/Batch
Solvent Anti-foaming agent Adhesive Filler
-- /r 3# LOSOh-GG (ffQ gals.)* .1 2.00
6.4
93 . 5
134.00 (15.0 gals.)
1950.00
100.0. -316 6.00**
-- / **0ne batch yields fir i 1 five gallon pail Ready Mix joint compound at 62.. lbs/pail.
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (5#0 i 20) For machine tools add 10 gallons H2O. (400 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90$ fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White
Dried compound shall match color of standard sample.
WNG: gvp
-/ denotes change
SGP 0017952
January iO, 1977
Supersedes Formula C-976 Dated: 7/21/76
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-976 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing.
FORMULA Raw Material
Function
Percent Lbs/Batch
/ Water Nalco
/Elvace EP-200
Filler C-970
Solvent Anti-foaming agent Adhesive Filler
-- .1
6.4 93.5
103 8.00
2.00
1 34 .00
1950.00
(125 gals.)*
(15.0 gals.)
100.0. 31 24.00**
*Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
/ **0ne batch yields 50 i 1 five gallon pail Ready Mix joint compound
at 62 lbs/pail.
?
WORKING CONSISTENCY Specifications for Paste
- Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency,
a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender: (580 20) For machine tools add 10 gallons H2O. (400 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90# fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG: gvp
-/ denotes change
SGP 0017953
4fey27r^?5---Tc; .u * i, ^ Sugersgdcgj
Dated i/l6/?5
CHICAGO, ILLINOIS, PLANT FORMULA READY MIX JOINT COMPOUND C-97& (HAND TOOLS)
9 76
-/ DESCRIPTION OF PRODUCT - White Ready Mix Joint Compound used for taping, topping, and texturing, poz. t>H->r td <Xv*nfUGSra
FORMULA Raw Material
Function
Percent Lbs/Batch
Water Nalco ^MIPKaKj^
Filler C-970
Solvent Anti-foaming agent
.f
$iT> Adhesive
$,o
Filler
e^,<j 9?r8
1024.00 (128 gals. )*
X-oo
i C&>00 (4.4 gals.) iQ^OtQQ* 1 yq I ,oo
100.0
3017.00**
^Approximately 56.5 lbs/100 lbs. of active ingredients (this may vary 8 gallons per batch.
**0ne batch yields 50 1 five gallon pail Ready Mix joint compound at 62 lbs/pail.
WORKING CONSISTENCY Specifications for Paste
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of
paste may be added to adjust.
Brabender: (-f4- 20) For machine tools add 10 gallons H2O. (400 i 20)
WORKING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing.
BONDING PROPERTIES Specifications
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90# fiber tear when delaminated.
CRACK RESISTANCE Specifications
- Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in
the wedge, and no cracks in the thinner half of the wedge.
COLOR
- White Dried compound shall match color of standard sample.
WNG:elz
-/ denotes change
SGP 0017954
SGP 0017930
CHICAGO FORMULA #976 ASBESTOS CONTAINING PRODUCTS