Document LpKeZZnka54dapBV0Lvp4X7bb

INERTEEN PPO-70-30 (70% Aroclor 1254 + 30% XCB + 0.2% PPO) Prope rtie s Typical Vise, at 37. 8 C., (AS TM D88) Specific Gravity at 15. 5/15. 5 C. (ASTMD1810) . Color APHA Condition Acidity, mg. KOH/ >. (AS TM D974, D664) Pour Point, C, (ASTM D-97) Inorganic Chlorides, ppm. (ASTM D1821) Refractive index at 25" C. (ASTM D1807) Distillation range (ASTM D20) Corrected for stem and barometric pressure Corrosion Water content ppm. (AS TM D1533) Resistivity 100 C. 500 Volts, DC 0. 1" gap (AS TM Dl 169) Dielectric Strength, 25" C (ASTM D877) Dielectric Constant, 100 C 1000 cycles* (ASTM D924) Phenoxy Propene Oxide or Glycidyl Phenyl Ether (ASTM D1701) Burn point, (ASTM D92)* Fixed Chlorine* . Coefficient of Thermal Expansion* (ASTM D1903) 56 to 61 SUS 1.518 to 1.528 100 max. Clear 0.014 max. -30 C. or lowor 0. 05 max. 1. 6153 to 1. 6173 1st drop - 200C. min. Below 270 C. - 35% max. 90% - 379 - 394 C. t After heating with aluminum for six hours at 200-220 C. , the aluminum must not be corroded either on visual or weight inspection, and the askarel should meet the following specs: Color, APHA 200 max. Acidity, mg. KOH/g. 0.014 max Inorganic chlorides ppm. 2 max. Condition Clear 30 max. Q 100 x 10 ohm-cm, min. 35 KV, min. 4.2 - 4. 5 0. 18% - 0. 22% by weight None to boiling .point 55. 6 min. 0.0007 cc/cc/ C. ' *Not determined unless by special request. 0154500 PCB-ARCH0743754