Document LK1yVnnyEG71oqrva4J7m30Zw
DRAFT MINUTES
Meeting: Date & time: Place:
Attendance Workplace
FPP4EU Collaboration Platform workshop
15 June 2022; 10:00-15:30 (CEST) Hotel Thon EU, Rue de la Loi 75, 1000 Brussels, Belgium Virtual meeting via Microsoft Teams List of attending organisations on pages 7-9 Link to minutes and presentations are here
1. Welcome and Antitrust Guidelines
welcomed the participants of the Collaboration Platform ("the Platform") and reminded them that the meeting should be conducted in respect of the Cefic antitrust guidelines.
2. Approval of proposed Agenda
reviewed the key topics for discussion, as included in the agenda.
3. Keynote session and PANEL 1: Expert panel (Regulators/Cefic)
explained the procedure for raising questions, both for in person participants and people
participating online. He also stated that the presentation slides will be shared with all participants in the
future and introduced
, the keynote speaker.
Regulating PFAS in the EU (
)
Policy Officer - Chemicals in particular REACH Regulation and international at DG ENV,
described the policy framework and the background that led to the European Commission ("the
Commission") taking action to regulate PFAS (meeting presentation attached in Annex 1). Mentioning the
pressure that the Commission received since 2019 to regulate all non-essential uses of PFAS and how this
translated to PFAS being explicitly mentioned in the Chemicals Strategy for Sustainability.
said
that there have been many cases of contamination of soil and water, including drinking water due to the
use of PFAS and it is very challenging and expensive to decontaminate these media. Finally,
gave an overview of the three main restrictions on PFAS, currently being developed, the PFHxA restriction,
the PFAS in firefighting foams one and the wide PFAS restriction.
Questions and discussion:
Will the wide PFAS restriction be included in the Stockholm Convention?
responded
that the Stockholm Convention regulates substances/chemicals or at least a group of closely
related chemicals.
1
DRAFT MINUTES
Will the overlap and alignment between the different legislation, such as the Soil strategy and the
Industrial Emissions Directive be addressed?
responded that once the Soil strategy is
ready, the Commission will coordinate to avoid possible overlaps. Since some PFAS are regulated
under REACH and some under the POPs (Persistent Organic Pollutants) regulation, the
Commission will have a better picture of the situation once the universal PFAS restriction dossier
is ready.
Introduction to FPP4EU and Collaboration Platform (
)
chairman of the FPP4EU, explained the sector group's membership, purpose, and recent
actions (meeting presentation attached in Annex 2). The sector group has 13 members, and its main
purpose is to act as a representative of producers, importers and users of the many potential
substances that fall within the broad definition of PFAS.
presented the 5 different working
groups within the FPP4EU, as well as the Collaboration Platform and explained their purpose. He
highlighted the importance of collaboration for the group's work to be impactful and gave an overview
on the FPP4EU website and the case studies featured there.
PFAS restriction in Europe (
)
, Project Manager - PFAS REACH at RIVM (National Institute for Public Health and the
Environment, Netherlands) explained the background that led to the universal PFAS restriction and the
status of the dossier (meeting presentation attached in Annex 3). Mentioning the pressure from the
European Parliament for a wide PFAS restriction and presenting cases of PFAS contamination from the
Netherlands and other European countries. An overview of the status of the 6 most recent restrictions
related to PFAS was also provided. In addition,
described the reasoning behind the
grouping approach and the OECD (Organisation for Economic Co-operation and Development)
definition, used by the 5 Competent Authorities. Furthermore,
discussed the main PFAS
subgroups, the concerns related to common properties of various PFAS and the uses of those
substances that have been identified by the authors of the dossier. Finally,
provided some
statistics on the feedback which has been submitted during the consultation rounds, the PFAS uses and
emission in the EU.
Questions and discussion:
Will the uses of PFAS and specifically the uses in the chemical industry and aerospace which
were not identified in the consultation by the 5 Competent Authorities currently be addressed
by the restriction?
said that some remaining uses will potentially be included in
the annexes.
How are the authorities going to address the overlap between the universal PFAS restriction
and the F-gases? .
said that based on environmental concerns, F-gases will not be
excluded from the restriction.
The FPP4EU proposed decision tree (
)
, Executive Director at Cefic, explained that the proposed decision tree offers a feasible way of dealing with the PFAS restriction (meeting presentation attached in Annex 4). Allowing derogations
2
DRAFT MINUTES
that will safeguard human health, the environment, and the applications that society needs. She
described the different branches/lines of the tree, highlighting that it will avoid double regulation and
address the control of emissions to support derogations. The tree differentiates the treatment of
industrial uses versus consumer ones and foresees derogations in cases where it can be proven that the
emissions are controlled, and the safety of workers is assured. She mentioned that SEAC (Committee for
Socio-Economic Analysis) will provide a socioeconomic assessment and Cefic will try to provide more data
through an ongoing study that it is preparing with Ricardo. Finally, .
highlighted the importance
of addressing societal concerns and providing data to help promote an informed debate and overall
collaboration in relation to the wide PFAS restriction.
Link between the firefighting foam restriction and the wide PFAS restriction (
)
.
, Senior Scientific Officer at the European Chemicals Agency (ECHA), presented the PFAS in
firefighting foams restriction and its impact on the upcoming wide PFAS restriction (meeting
presentation attached in Annex 5). He underlined the arrowhead approach concept that considers the
hazard properties of a particular substance (the precursors) and its terminal degradation product (the
arrowheads). Adding that the hazard/risk paradigm is used for first time. He also discussed ECHA's work
on the firefighting foams restriction by providing some overall statistics. Finally, he encouraged all
interested parties to participate in the public consultation which is currently ongoing.
Questions and discussion:
Would PFAS which are persistent but not toxic or mobile be exempted from the restriction? responded that concrete cases could be put forward through the public consultation.
Noting that the group as a whole is of sufficient concern to justify risk management as it is not possible to demonstrate the safe use of PFAS and is vital to minimize their releases.
Will fluoropolymers used in the medical sector be differentiated from other sectors? answered that it is important to understand the whole life cycle of PFAS and to have a
socioeconomic analysis showcasing which applications are considered essential for society.
Q&A session
How is the Commission going to align the wide PFAS restriction and the REACH revision? responded that the wide PFAS restriction will be evaluated under the current version of
REACH.
How is ECHA going to evaluate the cumulative criteria attributed to PFAS and how is going to
evaluate the information on their adverse effects? .
clarified that this is a
hypothetical idea. If you have a very persistent substance which is constantly released in the
environment, its concentration level will trigger adverse effects at some point.
Why are F-gases included in the firefighting foams restriction if they are neither used nor have
the properties to be used in firefighting foams?
responded that they are in the
scope of this restriction because they will be used as an example for the wide PFAS restriction.
How is ECHA going to respond to the lack of analytical methods on PFAS? . mentioned a survey conducted by ECHA where they approached all the contract laboratories in the EU that were doing PFAS analysis to ask about their capabilities and detection limits when it comes to PFAS.
3
DRAFT MINUTES
How is ECHA going to organise discussion within RAC (Committee for Risk Assessment) and
SEAC (Committee for Socio-Economic Analysis) considering that it covers such a broad range of
applications? .
noted that the issues will be discussed within the working groups and
the plenary, thus allowing more time for RAC members to discuss all topics.
How is the evaluation process of alternatives going to take place? .
responded that
there are applications where the alternatives can perform on the same level as the products
that contain PFAS.
.
commented on the decision tree presented by .
and said that the
differentiation between consumer and industrial uses could be challenging.
4. PANEL 2: Expert panel case studies DUs
EFCTC work on the proposed REACH restriction (
)
, EFCTC Sector Group Manager, presented the group's structure and work in terms of the
proposed REACH restriction (meeting presentation attached in Annex 6). She described the differences
between HFCs, HFOs, and non-fluorinated refrigerants and which F-gases are currently most used.
Highlighting how the F-gases have already been regulated in the EU for a number of years and
presenting some of their most important characteristics. They play a key role in decarbonising critical
European industries relying on heating and cooling technology. She highlighted that most F-gases fall
under the general scope of the firefighting foams restriction proposal. However, they are different than
other PFAS groups and since they are already regulated in the EU they should not be included in the
restriction. Finally, .
gave an extensive outlook on practical examples of potential impacts of a
ban on F-gases and described the actions currently undertaken by EFCTC to cooperate with the
regulators and provide them with complete sets of data on F-gases.
Questions and discussion:
Has EFCTC considered a study published by the Norwegian Environment Agency, which investigated the use of F-gases as refrigerants and other applications within the EU? . responded that this report has been analysed by the sector group and they are currently aiming to complete a literature search and compare all the limits that have been found in recent years. The goal of this exercise will be to better understand the situation and initiate an open dialogue with the authorities.
Harnessing energy from chemicals production: introducing HFOs as a Green Deal enabler (Bart Assche)
Assche explained how HFOs can enable a faster transition for Europe towards renewable energy sources (meeting presentation attached in Annex 7). He presented the actions from BASF to reduce CO2 emissions until 2050, through their carbon management program. The company's plan is to achieve the electrification of steam generation by heat pumps with advanced heat recovery and energy efficiency. In this way heat pumps will eventually replace fossil-generated steam. . Assche also described the different Coefficient of Performance (COP) for a heat pump and an E-boiler. The plan to develop a hightemperature heat pump to supply steam to the largest Verbund site in the BASF Group, which is located
4
DRAFT MINUTES
in Ludwigshafen, Germany. He also explained that alternatives were thorough fully considered and
discharged when evaluating the use of HFOs for these applications. Finally,
Assche explained
BASF actions to ensure minimised emissions of refrigerants from their plants and the company's plan to
proceed with other projects, such as using natural refrigerants like ammonia or butane as alternative to
HFOs.
Questions and discussion:
How is BASF tackling the issue of uncertainty considering that this technology could be banned
following the upcoming PFAS restriction?
Assche explained they understand the
importance of the upcoming wider restriction on PFAS, and they are closely monitoring all
developments. He added that the technology is completely new, and the company needs to
improve the cooperation with their suppliers and scale up the heat pumps.
PFAS in electronics (
)
.
provided a presentation on PFAS in electronics, as a representative from Digital Europe
(meeting presentation attached in Annex 8). He gave an overview of the uses of PFAS within the
electronics sector, showcasing that they are used in many different applications such as
semiconductors, LCD displays and battery electrodes, among others. He described how ePTFE
membranes allow for the passage of gas molecules for proper air and sound flow to prevent
deterioration and destruction of the electrical parts in a portable internal speaker or a mic. He also
showed the use of PTFE in antennas and broadcasting equipment for its excellent mechanical and
dielectric properties. .
argued that even though some applications of PFAS have been replaced
in the past years, PFAS often are the more expensive option and only used if no alternatives are
available. Background on the issue of transition times required to crate alternatives was provided.
Noting than in most cases it will take more that ten years to find an equivalent alternative.
Electronics related case study: PFAS in the semiconductor industry (
)
gave a presentation on behalf of ESIA (European Semiconductor Industry Association) on
PFAS used in the semiconductor industry (meeting presentation attached in Annex 9). She argued that
the semiconductor industry has very short innovation cycles, meaning that new products are brought
onto the market frequently, but the development of those products can take between 10 and 20 years.
According to .
the semiconductor industry has the most complex and sophisticated
manufacturing process in the world since they must work in a very controlled environment. She
continued with the different PFAS used for their unique properties within the industry and the potential
risks and challenges projected to impact the sector due to the various PFAS restrictions in the EU.
Extensive value of fluoropolymers to European innovation and growth in key sectors ( )
, as the director for the Fluoropolymers group of Plastics Europe (FPG), presented the potential contribution of fluoropolymers to the European industry (meeting presentation attached in Annex 10). He began by rejecting some popular beliefs on fluoropolymers, such as that they are mainly used in
5
DRAFT MINUTES
consumer products or that their persistency property results in an unacceptable risk to human health
and the environment. He described the unique combined set of properties that characterises
fluoropolymers and their use in many key economic sectors. According to
, replacing
fluoropolymers by other materials has consequences and the trade-offs of replacing fluoropolymers are
in areas of fire safety, weight savings and performance. Finally, he explained the group's commitments
towards responsible manufacturing and proposed an open dialogue with ECHA and the authorities to
discuss difficult issues such as the end of life (EoL).
Q&A session
How could chips manufacturing be impacted if a restriction to use PFAS is adopted, considering
that most of the supply for those materials comes from Europe?
acknowledged the
difficulty of answering such a question but noted that there will not be a replacement for
transfer fluid.
.
was asked about the statistics on renewables and electronics mentioned during his
presentation and whether most fluoropolymers are used in high tech industries? He replied that
fluoropolymers are indeed mainly used on high tech and innovative products but are also vital
in the chemical industry.
How is Digital Europe dealing the complexity of the PFAS restrictions?
responded
that part of the complexity comes from the supply chains. In addition, many of their suppliers
might not be aware of the upcoming restriction.
Digital Europe and ESIA were asked whether they are considering conducting a socioeconomic
analysis for PFAS used in their industries. .
responded that the consortium is currently
collecting data from semiconductor manufacturers in both Europe and the US and will advance
with a socioeconomic assessment, as well as try to identify possible replacements.
5. Closure
reminded the participants that several case studies are now featured on the FPP4EU website (fpp4eu.eu), noted that the group is aiming to have another meeting of the Collaboration Platform in November, thanked the participants and closed the meeting at 15:30 CET.
6
DRAFT MINUTES
LIST OF PARTICIPATING ORGANISATIONS
Meeting:
FPP4EU Collaboration Platform
Date: Place:
15 June 2022; 10:00-15:30 CEST
Hotel Thon EU, Rue de la Loi 75, 1000 Brussels, Belgium Virtual meeting via Microsoft Teams
3M ABB AG AGC Chemicals Europe Agency for Competitiveness and Innovation IAPMEI Portugal AmchamEU AnimalhealthEurope APPLiA Arkema BASF BASF Schweiz AG BAuA Federal Institute for Occupational Safety and Health Germany Bausch + Lomb Bayer BDI Federation of German Industries Cefic Chemical Industries Association Chemours Contamac Ltd CropLife Europe Daikin Chemical Europe GmbH Daikin Europe NV Department Omgeving Afdeling Strategie, Internationaal, Digitalisering en Organisatie SIDO Belgium Department Omgeving Vlaams Planbureau voor Omgeving Belgium DG Environment, European Commission DigitalEurope Direction gnrale des Analyses conomiques et de l'Economie internationale Unit Economie Durable - Cellule REACH Belgium DuPont EDANA EFPIA - Eli Lilly European Heating Industry Environment Agency UK European Partnership for Energy and the Environment EPEE European Semiconductor Industry Association ESIA EURATEX Eurofeu
7
DRAFT MINUTES
Euromcontact European Chemicals Agency ECHA European Phenolic Foam Association (EPFA) European Safety Federation European Semiconductor Industry Association (ESIA) ExxonMobil Corporation Fachverband der Chemischen Industrie sterreichs Federation of the European Cutlery, Flatware, Holloware and Cookware industries FEC Federation of Environmental Trade Associations Federchimica Federazione nazionale Industria Chimica Federacin Empresarial de la Industria Qumica Espaola FEIQUE Finnish Environment Institute Gesamtverband Textil und Mode e.V. Gujarat Fluorochemicals GmbH Honeywell Hydrogen Europe Hyundai Motor Europe Technical Center GmbH IPC International Inc. Johnson Controls Kabinet gouverneur Cathy Berx Belgium Projectcordinator/PFOS-problematiek Kreab MedTech Europe Merck KGaA Merck Life Science Mexichem Ministry of Environment Miteco Spain MSD Animal Health National Institute for Public Health and the Environment RIVM The Netherlands Olon S.p.A Orgalim - Europe's Technology Industries Plastics Europe - Fluoropolymer Products Group PU Europe Rhm GmbH Serge Ferrari group Service public de Wallonie SPW Agriculture Ressources naturelles Environnement Belgium Smiths Group Solvay SPECTARIS e.V. SPF Sant Publique - FOD Volksgezondheid Belgium Sulzer Management AG Swedish Chemicals Agency Synthomer The Danish Environmental Protection Agency TotalEnergies Lubrifiants
8
VDMA The Mechanical Engineering Industry Association VS FOCUM VSI The German Lubricant Manufacturers Association W. L. Gore & Associate GmbH WILO SE Wolf Group O, member of Estonian Chemical Industry Association ZVEI Zentralverband Elektrotechnik- und Elektronikindustrie e.V.
DRAFT MINUTES
9