Document LJNbrG6bk01MxM1aZxzkjeLGz

Vista Chemical Company 900 Threodneedle Houston, Texas 77079 (713) 588-3000 P.O. Box 19029 Houston, Texas 77224 Fax (713) 588-3236 November 2, 1990 TGG: JCL: ERT: MJH: AJ0- RP XF:_________ VISTA Mr. T. F. Ling Betz PaperChem 7510 Bay Meadows Way Jacksonville, Florida 32256-7591 Dear Mr. Ling: This letter is in response to your request for information regarding the status of Vista ALFONIC 1412-60, under 21 CFR 176.170 and 176.180. Vista believes that this product is acceptable for use under these two sections based on the prior sanction granted this product in 21 CFR 181.30. Appropriate pages from 21 CFR 181.30, 176.170 and 176.180 are attached. The prior sanction listing applicable to ALFONIC 1412-60 is "Aliphatic Polyoxyethylene Ethers". Sincerely, Thomas G. Grumbles, C.I.H. Manager Environmental Affairs dlj Attachment cc: Mike Clark VVV 000011395 21 CFR Ch. I (4-1-88 Edition) e whatever limitations) or 'n(s) may be necessary for the .ft i of the Ingredient, or revocam to prohibit use of the Ingredient, order to prevent the adulteration of od in violation of section 402 of the ;t. d) In proposing, after a general aluation of rise of an ingredient, regitlons affirming the GRAS status of bst&nces added directly to human od In Part 184 of this chapter or submces In food-contact surfaces In xt 186 of this chapter, or establishl a food additive regulation for subuices added directly to human food Parts 172 and 173 of this chapter or yd additives in food-contact surfaces Parts 174, 175, 176, 177, 178 and 79.45 of this chapter, the Commisner shall, if he is aware of any prior iction for use of the ingredient der conditions different from those yposed in the regulation, concuritly propose a separate regulation /erlng such use of the ingredient der this part. If the Commissioner unaware of any such applicable or sanction, the proposed reguian will so state and will require any rson who intends to assert or rely on :h sanction to submit proof of its stence. Any food additive or GRAS atlon promulgated after a genertion of use of an ingredient ist. ^es a determination that exded uses would result in adulteran of the food In violation of section : of the Act. and the failure of any son to come forward with proof of h an applicable prior sanction in re use to a proposal will constitute a ver of the right to assert or rely on h sanction at any later time. The ice will also constitute a proposal establish a regulation under this t. Incorporating the same provlis, in the event that such a regulai is determined to be appropriate as isult of submission of proof of such applicable prior sanction in rense to the proposal. mmarnmassm Food and Drug Administration, HHS 181.27 Subpart 8--Spocific Prior-Sanctioned Food Ingrodionts 9 181.22 Certain substances employed in the manufacture of food-packaging materials. prior to the enactment of the food additives amendment to the Federal Food, Drug, and Cosmetic Act, sanc tions were granted for the usage of the substances listed in SS 181.23, 181.24, 181.25, 181.26, 181.27, 181.28. 181.29, and 181.30 in the manufacture of packaging materials. So used, these substances are not considered "food additives" within the meaning of sec tion 201(s) of the Act, provided that they are of good commercial grade, are suitable for association with food, and are used in accordance with good man ufacturing practice. For the purpose of this subpart, good manufacturing practice for food-packaging materials includes the restriction that the quan tity of any of these substances which becomes a component of food as a result of use in food-packaging materi als shall not be intended to accomplish any physical or technical effect in the food itself, shall be reduced to the least amount reasonably possible, and shall not exceed any limit specified in this subp&rt. 142 FR 56728, Oct. 28, 19771 9181.23 Antimycotic*. Substances classified as antimycotics, when migrating from food-pack aging material shall include: Calcium propionate. Methylp&raben (methyl p-hydroxyben- zoate). Propylparaben (propyl p-hydroxybenzoate). Sodium benzoate. Sodium propionate. Sorbic acid. 142 FR 14638, Mar. 15, 1977: 42 FR 56728, Oct. 28,1977) 9 181.24 Antioxidant*. Substances classified as antioxi dants, when migrating from food-packaging material (limit of addition to food, 0.005 percent) shall include: Butylated hydroxyanlsole. Butylated hydroxytoluene. Dflauryl thlodiproplonate. Distearyl thlodiproplonate. Gum guaiac. Jiordihydrogualretic acid. Propyl gallate. Thiodipropionic acid. 2,4,5-Trthydroxy butyrophenone. (42 FR 14638, Mar. 15. 1977; 42 FR 56728. Oct. 28, 1977) 9 181.25 Drier*. Substances classified as driers, when migrating from food-packaging materi al shall include: Cobalt caprylste. Cobalt linoleate. Cobalt n&phthenate. Cobalt taU&te. Iron caprylate. Iron Unoleate. Iron naphthenate. Iron tallate. Manganese caprylate. Manganese linoleate. Manganese naphthenate. Manganese tallate. 142 FR 14638, Mar. IS. 1977: 42 FR 56728, Oct. 28. 1977] 9 181.26 Drying oils as components of fin ished resins. Substances classified as drying oils, when migrating from food-packaging material (as components of finished resins) shall Include: Chlnawood oil (tung oil). Dehydrated castor oil. Linseed oil. Tall oil. [42 FR 14638. Mar. 15. 1977; 42 FR 56728. Oct. 28, 1977] 9181.27 Plasticizer*. Substances classified as plasticizers, when migrating from food-packaging material shall include: Acetyl tributyl citrate. Acetyl triethy) citrate. p-tert-Butylphenyl salicylate. Butyl stearate. Butylphthalyl butyl glycolate. Dlbutyl seb&c&te, Di-(2-ethylhexyl) phthalate (for foods of high water content only). Diethyl phthalate. Dilsobutyl adipate. Diisooctyl phthalate (for foods of high water content only). Diphenyl-2-ethylhexyl phosphate. Epoxldized soybean oil (Iodine number max imum 6; and oxlrane oxygen, minimum, 6.0 percent). 381  181.28 Ethylphthalyl ethyl glycolate. Glycerol monooleate. Monoisopropyl citrate. Mono. di*. and trtstearyl citrate. Triacetln (glycerol triacetate). Triethyl citrate. 3-<2-Xenolyl)-1.2-epoxypropane. (42 PR 14638. Mar. 15. 1977; 42 FR 50728. Oct. 28, 1977. as amended at SO FR 49S38. Dec. 3. 19851 9 181.28 Release agents. Substances classified as release agents, when migrating from food packaging material shall include: Dlmethylpolyslloxane (substantially free from hydrolyzable chloride and alkoxy groups, no more than 18 percent loss In weight after heating 4 hours at 200* C.; viscosity 300 centlsokes. 600 centisokes at 25' C. specific gravity 0.96 to 0.97 at 25* C. refractive index 1.400 to 1.404 at 25' C). linoleamide (linoleic acid amide). Ole&mlde (oleic acid amide). PalmltamJde (palmitic acid amide). Stearamlde (stearic acid amide). [42 FR 14038, Mar. 15, 1977; 42 FR 56728. Oct. 28. 19771 9181.29 Stabilizer*. Substances classified as stabilizers, when migrating from food-packaging material shall include: Aluminum mono-, di-. and triste&rate. Ammonium citrate. Ammonium potassium hydrogen phosphate. Calcium glycerophosphate. Calcium phosphate. Calcium hydrogen phosphate. Calcium oleate. Calcium acetate. Calcium carbonate. Calcium rlcinoleate. Calcium stearate. Dlsodium hydrogen phosphate. Magnesium glycerophosphate. Magnesium stearate. Magnesium phosphateMagnesium hydrogen phosphate. Mono-, di-. and trisodlum citrate. Mono-, dl-. and tripotassium citrate. Potassium oleate. Potassium stearate. Sodium pyrophosphate. Sodium stearate. Sodium tetrapyrophosphate. Stannous stearate (not to exceed 50 parts per million tin as a migrant in finished food). Zinc orthophosphate (not to exceed 50 parts per million zinc as a migrant in finished food). 21 CFR Ch. 1 (4-1*88 Edition) Zinc resinate (not to exceed 50 parts per million zinc as a migrant in finished food). (42 FR 14638, Mar. 15, 1977; 42 FR 56728. Oct. 28. 19773 9181.30 Substances used in the manufac ture of paper and paperboard products used in food packaging. Substances used In the manufacture of paper and paperboard products used in food packaging shall include: Aliphatic polyoxyethylene ethers.* 1-Alkyl (C-C,.)3-amlno-3-amlnopropane monoacetate.* Borax or boric acid for use In adhesives, sizes, and coatings.* Butadiene-styrene copolymer. Chromium complex of perfluoro-octane sul- fonyl glycine for use on paper and paperboard which is waxed.* Dlsodium cyanodlthlolmldocarbamate with ethylene diamine and potassium W-methyl dithiocarbamate and/or sodium 2-mercaptobenzothlazole (sUmlddes).* Ethyl acrylate and methyl methacrylate co polymers of Itaconlc acid or methacrylic acid for use only on paper and paperboard which is waxed.* Hexaroethylene tetramine as a setting agent for protein, including casein.* l-(2-Hydroxyethyl)-i-(4-chlorobutyl)-2-alkyl (C,-C,,) Imldazoltnium chloride.* Itaconlc acid (polymerized). Melamine formaldehyde polymer. Methyl acrylate (polymerized). Methyl ethers or mono-, dl-, and tripropy lene glycol.* Myristo chromic chloride complex. Nitrocellulose. Polyethylene glycol 400. Polyvinyl acetate. Potassium pentachlorophenate as a slime control agent* Potassium trlchlorophenate as a slime con trol agent.* Resins from high and low viscosity polyvi nyl alcohol for fatty foods only. Rubber hydrochloride. Sodium pentachlorophenate as a slime con trol agent.* Sodium-trichlorophenate as a slime control agent.* Stearato-chromic chloride complex. Titanium dioxide.* Urea formaldehyde polymer. Vlnylidine chlorides (polymerized). Under the conditions of normal use, these substances would not reasonably be expected to migrate to food, based on avail able scientific information and data. 382 Food and Drug Administration, t 9181.32 Acrylonitrile copolymers resins. (a) Acrylonitrile copolymers resins listed in this section, cont less than 30 percent acrylonitri; complying with the requiremei paragraph (b) of this section, n safely used as follows: (1) Films. <i) Acrylonitrile/t ene/styrene copolymers--no r tiona. (ii> Acrylonitrile/butadiene r mers--no restrictions. (ill) Acrylonitrile/butadiene < mer blended with vinyl chlortd acetate (optional at level up to cent by weight of the vinyl cl resin) resin--for use only In c with oleomargarine. (W) Acrylonitrile/styrene < mer--no restrictions. (2) Coatings, (i) Acrylonitrih diene copolymer blended with nyl chloride resins--for use o: paper and paperboard in conta< meats and lard. <U) Polyvinyl chloride resin b with either acrylonitrile/butadi polymer or acrylonitrlle/bui styrene copolymer mixed wit prene, for use as components veyor belts to be used with fruits, vegetables, and fish. (Ill) Acrylonitrile/butadiene/ copolymer--no restrictions. (iv) Acrylonitrile/styrene mer--no restrictions. (3) Rigid and semirigid con (i) Acrylonitrile/butadiene/styi polymer--for use only as pip handling food products and for ed-use articles intended to food. (U) Acrylonitrile/styrene r< restrictions. (Ill) Acrylonitrile/butadiene mer blended with polyvinyl resin--for use only as extruded <b) Limitations for aery monomer extraction for finish contact articles, determined t the method of analysis tltle< Solid Chromatographic Procet Determining Acrylonitrile Mor Acrylonitrile-Containing Polyp Food-Simulating Solvents/' * incorporated by reference. Co available from the Division and Color Additives, Bureau < 00ll39? ,, CfR Ch. I (*-*- MI,lon) Subpoti A,--(Ratarved] >. 6--Substances for Use Only j Components of Foper end Pa- Mrboord 110 Acrylamide*acrylic acid resins, ylamide-acrylic acid resins may -fely used as components of artiLntended for use in producing, ifacturing. packing, processing, vring, treating, packaging, transng, or holding food, subject to the .slozis of this section. Acrylamide-acrylic acid resins are uced by the polymerization of acnide with partial hydrolysis or by copolymerization of acrylamide acrylic acid. i The acrylamide-acrylic- vid is contain less than 0.2 percent re al monomer. i The resins are used as adjuvant* he manufacture of paper and p*- ,j :jonaercdesisnaryamtooaucnctsomnpolitshtotheextceeecdh^ il effect and not to exceed 2 (tag. t by weight of the paper or p rd, 6.120 Alkyl krtene dimers. Ikyl ketene dimers may be _ d as a component of articles tnt 1or use in producing, manulai -veking, processing, prei .. packaging, transports >dmg food, subject to the pi this section. a) The alkyl ketene dimers: tetured by the dehydrohalo the acyl halides derived 1 ty acids of animal or veget d oils. hi The alkyl ketene dimem i an adjuvant in the coanufi per and paperboard under a 'ions that the alkyl ketee id their hydrolysis produ tones do not exceed Q.4 eight of the paper or pape <c) The alkyl ketene eft ed in the form of an Qi in which may contain so, Jfonate as a dispersant, . :'*10 176.130 Antt-offset t Substances named to nd (O of this section' used to prevent the transfer of inks employed in printing and decorating (b) Any one or any combination of paper and paperboard used for food packaging in accordance with the pro visions of this section: the substances named is used or in tended for use as chelating agents. (cl The substances are added in an (a) The substances are applied to the nonfood contact, printed side of the paper or paperboard in an amount not greater than that required to accom amount not greater than that required to accomplish the intended technical effect nor greater than any specific limitation, where such Is provided. plish the technical effect nor greater than any specific limitations, where slich are provided, 8176.160 Chromium (Cr 111) complex of JV-athyl-N-heptadecylfluoiXMMtane eutfonyl glycine. <b> Anti-offset powders are prepared from substances that are generally recognized as safe In food, substances Ttnhee chromium (Cr HuiI) complex of jV?--eethbyl - N - heptadecylflu--o--r-o----o- c* tane for which prior sanctions or approvals sulfonyl glycine containing up to 20 vere granted and which are used in ac cordance with the specific provisions of such sanction or approval, and sub stances named In paragraph (c) of this section. percent by weight of the chromium <Cr HI) complex of heptadecylfluoro- octane sulfonic acid may be safely used as a component of paper for packaging dry food when used in ac (c) The substances permitted are as follows: cordance with the following prescribed conditions. (a) The food additive is used as & SubstancM UntitMona component of paper In an amount not to exceed 0.5 percent by weight of the paper. Crtw wucrtonde................ MU nydrogm potyMox- at MUM t*reh--modified..... c*T,P*yw* *tth | i?e.3S20 at rnm oiMtt..... 1 ** chapter hexoaie. (bXl) The food-contact surface of the paper U overcoated with a poly meric or resinous coating at least Mjmil In thickness, that meets the provi sion of 9 176.170; or (2) The treated paper forms one or more piles of a paper in a multiwall bag and Is separated from the food by ! UMSfl Chelating agents used in the 1 tnnufaeture of paper and paperboard, fee substances named in paragraph J'Of this section may be safely used |) fee manufacture of paper and paIMtoiftt in accordance with the ccn- __ prescribed in paragraphs (b) -l>of this section: klChelating agents: 04 at least one ply of packaging films or grease-resistant papers which serves as a functional barrier between the food additive and the food. Such packaging films or grease-resistant papers con form with appropriate food additive regulations. (c) The labeling of the food additive shall contain adequate directions for its use to insure compliance with the ntusMcn Onxttbon* requirements of paragraphs (a) and <b) of this section. JpWfrftoWa..... tMTMc*. 1 176.276 Component* of paper and paper board in contact with aqueous and fatty food*. L** W *'vWn*tn-. Substances identified in this section may be safely used as components of the uncoated or coated food-contact surface of paper and paperboard in tended for use in producing, manufac turing. packaging, processing, prepar ing, treating, packing, transporting, or holding aqueous and fatty foods, sub- 167 VVV 000011398  IW.I70 CFR Ch. t (4-1-41 ject to the provisions ol this section. Components of paper and paperboard available from manufacture^ in contact with dry food of the type from which it is possible to M identified under Type VIII of Table 1 that only substances ldenUflof in paragraph (c) of this section are paragraph (a) are present to 14 subject to the provisions of f 176.180. contact surface of such page? (a) Substances identified in para* perboard. ^ graph CaXl) through (5) of this sec (11 Substances generally reoofi tion may be used as components of the as safe in food. food-contact surface of paper and pa (2) Substances generally recootoai perboard. Paper and paperboard prod as safe for their intended use In Mfif ucts shall be exempted from compli and paperboard products used In (M ance with the extractives limitations packaging. prescribed in paragraph (c) of this sec (3) Substances used in accordion tion: Provided, That the components with a prior sanction or approval of the food-contact surface consist en (4) Substances that by regulatieo to tirely of one or more of the substances Parts 170 through 189 of this chtpur identified in this paragraph: And pro may be safely used without extracUm vided further. That if the paper or pa limitations as components of the as- perboard when extracted under the coated or coated food-contact surface conditions prescribed in paragraph (c) of paper and paperboard in contact of tills section exceeds the limitations with aqueous or fatty food, subject U> on extractives contained in paragraph the provisions of such regulation. (c) of this section, information shall be (5) Substances identified in this paragraph, as follows: Acetyl peroxide.......... Acrytarnide-rnethacrytic acid-maleic anhydride copolymers con- . For use only as polymerization catalyst. taioioq not more Bwi 0.2 percent o' resioua) acrylamide ( For use only as a retention aid employed prior to the monomer and having an average nitrogen content at H 9 1 forming operation m the manufacture of paper and (<( percent such that 1 percent by weight aqueous setoten j board m such an amount that the finished paper w* has a minimum viscosity ol 600 cenbpoisas at 75' F. as determined by IVG-senes Brookfieid viscometer (or equiva lent) using No 2 spindle at 30 i.p m Acs'ytan^o-S-meft'ewytytoxyethyttnmerhyfBmmoniurn methyl paperboard wtk contain the additive at a level not in of 0.05 percent by weignt of dry fibers *i the finisried fat* and paperboard sulfate coootymer teams containing not more than tO molar i For use only s$ a retention aid and floccuiant employed f*'5' percent of fl-methacrytyloicvethyflnriwthy'arrwTionairri methyl sulfate and containing less than 0 2% of residual scrytanv ids monomer. to the Sheet-lorming operation in the manufacture of papa and paperboard. Acrylonitrile polymer, reaction product with ethylenediamne suttate having a nitrogen content of 22 5-25.0 percent (KjeMaht Ory basis) and containing no more than 0 075 percent monomer as sthytenediamme The finished resin m a 2* percent by weight aqueous solution has a viscosity Ot 1.000-2,000 centipOfses at 25" C as determined by i_VT- For uaa onty as a sue promoter and retention aid at * **** nof to exceed 0 6 percent by weight pi the dry paper arc paperboard. senes Brookfield viscometer using a No. 4 spindle at so r.p.m. (or by other equivalent method). Acrytomvite polymer with styrene, reaction product with ethyt- enedmnvne acetate, having a nrtrogen coolant of 7.4-83 t. For use only as a sizing matena) applied attar the tfiaet- percent (KjefcJaht dry basis) and containing no more than 0 2$ percent monomer as ethylenediamne. formmg operation at the manufacture of paper and W*1 board in such amount that the paper and paperboard ** contain (ha aAbove at a level not m excess of 0.2$ perpem by weight ot the dry paper and paperboard. 2. For use onty as a sizing material applied pnor to the sheet- tomsng operation m (ha manufacture of paper end MF*' | board m such amount that the paper and paperboard w* | contain the additive at a level not in excess of 1 0 percent 1-Alkenyl olefins, contain,no not 1st, and higher olefins. *" *** than ,, 72 percent of C30 I by weight ol the ay paper and papertnara. For use only under the following conditions; 1. In coatings tor paper and paperboard with food o> Type* ' If, IV-B, and Vll-8 described in Table \ of paragraph <c) <& this section under conditions or use 6. F. end G described m Table 2 of paregrapn (c> of the section 2. In- coatings for paper and paperboard with food of Type vm described #n Table I of paragraph (c) ot this section under conditions of use A through H described as TaUe 2 o' paragraph (cl of the section 168 HHSDrug AdmtaUtrottan, -MtUN mortise, m whadi the eDtenrJ tram olefins which contain not leS than add copofymera (CAS ^0P*noi' ('CAS Fteg- No. t2*--si ba^hethyVZ-perfiuoroalkytsuitcnarnKlo ethyf) Ms. containing not more than 15% ammonium (AMnyt.2-perfiuoroaikyisulionamido ethyf| phe*r the alkyl group * more man 9S% C, and the fluortna content of 50.2% to 52.6% as on a aofidi basis. me Of parauKaia................................................. ------- fBfwrcjeoumrutamtec..a.r.b..o..n.a..t.e..(.C...A..S..R...a.g....N..o......3.2..5..3.5..-.9--4-5) md lb tartanc aod adrtjd. ~ itO-Anthraquinone (Chen-tcal Abstracts Service flegovy No. K-66-1) wivch has purity of not less than 96 percent ,'WsrFaBoiyBi(2p-ehryodxriodxey. .B. .t.f.^. .f.).a. .l.. .i.y. .f. .(.C. . . .,.r.-. .C. . .,,.j.a. . .m. . . i.d. . .e. ................................... --.--. . . . . . . . . . . . . . . > Hb(iieBiujiyiieihyl)teirakisUoctedacy*oy)-TiathyiImetamne nena having a s.9-6.5 percent nrtrogen content Mrf-eutyl hydroperoxide Mr-Butyl pertuode.......... Catcaan eostearate-..... Carrageenan and salts of carrageenan ea described H 1?2.0 and 172.62* of the chapter. CCaasstteorr poki,. hsyudffrtottgde.naamtemd.o. .n. .i.u. .m. . .,. . .p. .o. .t. .a. .s. .s. .i.u. .m. . .,. . o..r...e...w..f..c..e..i.t..a..a..l.t...... CaHUose, regenerated... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........... ......... CNorecatarnde............ ..... ........................................ --.............. CobeftouS acetate....... ................................................................ VVV 000011399  174.180 21 CFR Ch. I (4-148 feNt obtain the -wax-, petrolatum', and min eral oil-corrected chloroform-soluble S 176.180 Components of paper and yg extractives residue (ee ). This ee' is board in contact with dry food. substituted for e in the equations in The substances listed in this tirrlha paragraph (dXSXD (a) and (b) of this section. (Note: In the case of chloro form-soluble extracts which contain high melting waxes (melting point may be safely used as component** the uncoated or coated food-cotzfei2 surface of paper and paperboard tended for use in producing, nranufifr greater than 170* P). It may be neces turtng, packing, processing, preparing sary to dilute the heptane solution further so that a 50-milliliter aliquot will contain only 0.1-0.2 gram of the chloroform-soluble extract residue.) (e) Acrylonitrile copolymers identi treating, packaging, transporting, r holding dry food of the type identified In $ 176.170(c), Table 1, under Type VIII. subject to the provisions of this section. fied in this section shall comply with the provisions of S 180.22 of this chap ter. except where the copolymers are (a) The substances are used is amounts not to exceed that required to accomplish their Intended physical restricted to use in contact with food or technical effect, and are so used as only of the type identified in para to accomplish no effect in. food other gVrIaIIp.h (c). Table l under Category than that ordinarily accomplished by packaging. (Secs. 20l(s). 409. 72 Stfit. 1784-1783 as amended (21 U.S.C. 321(s), 348); secs. 409. 701(e). 706. 70 Stat. 919 as amended. 72 Stat 1784-1788 as amended. 74 Stat. 399-407 as amended (21 US C- 348. 371(e). 376)> [42 FR 14554. Mar. 15. 19771 Editorial Non: For Federal Register ci tations affecting 1 176.170, see the List of CFR Sections Affected in the Finding Aids section of this volume. <b> The substances permitted to be used Include the following: (1) Substances that by 1 176.170 and other applicable regulations in Parts 170 through 189 of this chapter may be safely used as components of the uncoated or coated food-contact sur face of paper and paperboard, subject to the provisions of such regulation. (2) Substances identified in the fol lowing list; (2'Alkenyl| sucorae anttydndea tn wtwch the ftttrenyt groups are derived Rom olefins which contain not less lhan 76 Percent Cm and higher groups (CAS Peg No. 70983-55-0) Ma-O-O-AlfcoitfC.r-C,,) ethoxy] athoxylethyUdisodtum sulfoauccmate. For use as a potymerxaton emulsifier and latex emulsion Aluminum and calcium sahs ot FD 4 C dyes on a substrate of alumna. Ammonium nitrate .... .......... Amytose................................................................. stabilizer at levels not to exceed S percent by weight pi tout emulsion solids Cclorant. Sanorn meliorate.................................................................. ......... l,2-6njttt*azc4>iv3-n (CAS Registry NO 2634-33-5}.... For use as preservative <n coatings and sitings. Foe use only as t preservative in paper coating compositions iV.iV.0i(hybroxyethyl}laurmiiSe..................................................... SiaOriehKxomethyl) suflone C.A. Registry No. 3064-70-6..... . Borax................-............................... .................-.... -....................... Boric eod ................... ............. ---................... ...... oepSutyt alcohol..................................................... ............. ........... ButW benzyt phtnalate...... ............................................................... Canoetaia win.................................................................................. . Carbon tetrbehiohde.......... . Castor cal. potyoxyethylatea (42 moles ethylene oxide)............. Cationc soy protem hyflrofyrerJ (hydroiyred soy prolan isolate and limited to use at a tore! not to exceeo 0.02 mgim' l(o0.f0t0n3n1 mg/c--m ) e-l f-inished Paper and paperboard. For me on* aa a preservative in coabnos Fw ^ a* preservativa in coatings modified by beatment with 3-chioro-2-hydroxypro0y1tnmettv wx) feor^etenbon5^10 adht"wv- >*9TM"" atruciunng agent. yiamnwnum chtcnoe) , Cabcxvc soy protein (soy protein isolate modified try treatment I For use only s coating adhesive, with 3-cNor*.2-hydiOxypropyttnrrielhyt.*mmonium chloride). j and fiber retention am. Chloral hydrate...................... Af-Cyctohexytyj-ioiuene sulf^ai^'.^ . . . . . . . . J Pigment Structuring agent, Polymerization reeceon-coom* agent. 190 Drug Administration, HHS Lot at substances HWdnWJiwn* rgOynoeo--t O..b...w...u...M...t..e...(.C...A...S...R...e..g... No. l2&-55^ fgywi monobutyt afihar............. i fjdOf motwetftyf atfsar.................... For use crSy a- t at tafioer fatty acids. ijeayisrmde polymer with acryiatwoe mewj i ----------- N.N-hnr>r>i.T|l ettiytenorhanwia fMoiecyMs-finoleoyl-ethytenBCMmme mixture produced - al efi tatty eods are made to react with ethytenedui art that the trashed nurture ftas a melting point of r-rBfl* F, is determined by ASTV method 0127-60. Ian add value ol to maximum. ASTM Methoq Ot27-dO Maid Method ot Test for Meftmg Pomt of Petrolatum || Maooystaffine wax" (Revised 19601 is incorporated |Ndmnce. Copie* are available from University M>cn> gsUarmbonai. 300 H. ZeeO M. Ann A/bor, M) *6106. i ewOflle for mspecdon at the Office of the Federal a. 1 tOO L St NW., Washmgtcn. 0C 20406. ina.... .......................................... .-j glycol diberuoat* (CAS Reg. No 27136-31-4)...... i Moctadecyisuffoeuccmamate.......................................... s/t throether of polyethylene gtycoi................................ i (eweytamde)..................... ................................ ............ 1, polymer with letrahydro-e-hyOroxy-S-methyt- ,TN)pyrewdHtone, propoxytated. Funvgaw ---Ji ooxdidde*..a..d..d..u...c.t...o..l..m...o...n..o..-.(.2..-.e..t.f.t.y..t.h..e..x..y..<..)...o..-.p..h..o..a..p...f.t.a..t.e................ I add (C-C,J dieihanoiemide..................... I ol Catty sods, hydrogerwted. potassium salt........................ thytte........................................... mohocaprate................ ....... (Akhamkr.a..e..-l.o..r.m..a..id.e..h..y.d..*..c.o..n.d..e.n..s.a.t.e..(.C..A..S..R..e..g....N..o....2..7.Q...I3..- For use .9l-0) formed by reaction m the molar raw of appnwmatety & <233:1, reepectNety. The reaction product Rm a number F. Mtge molecular Weight of Z7BU as Mteiwied by * EKAidmmFvmmepthoolydm. er (CAS Reg. No. 53037-34-6)...................... | For us ^eamathyteoewtrarmoa......................... .......................... \ Potym- Hasten* gtycol (2-m*thyt-2,*-pentarter**)....................... ^droebetyt efeohof......................................... ............ *Nyd)(ymethoxyTn*thyM-a4a-3,7-choxabreycK>(3.3.0) octane. For u SJiydroxymethyM-axa-3.7-diatMCycto{3.3.0)oetane, and 5- j hydwxypo*y('fiethyCeneo!ry)m*thyUi-*ia-3,7- ( 'teBpcroapbaicnyodleQmOm.e3-t0ry)dorocttWanoenmd#ix..t.u..r.e............... fccpropyt m- end poresol (thymot denved)............................ ^eerac ............................................................ Ude anftydmM-daaobutytene copolymer, ammonxAit i| t j v' UeCoedmuinmesloarlmt atdehyde modified with: Aleohoia (etnryt, butyl, Robutyi. propyl or oopropyi). 0tethy(#o*trt*rrirt*. I Be: I i fidno-bia-Outytamina. imintypla-ethyCenairntn*. IFmoitnyoa^mJda-iperaopmylaamd*Cbney reacting ethylenediamn* or trtmePiy- teneddndna with tficMoroathane or cfichtorcpropan*. Stitertfic edd TetraethyienepentaiTyn*. Triethytenetetramme. UatftyfaJcohei......... ................................................................. Methyl esurs of morp-, and wpropyieo* glycol---------- ---Methyl napthaJen* tuttonie aod-termeWehyd* oondenette Meetohdyklaimtedsalt. poty(Ai-l.2-diriydroxyathyten.t.3-midaoldn-g' one). 19 VVV 000011400 TO: R. D. Gamblin Interoffice Communication FROM: DATE: SUBJ: T. G. Grumbles November 2, 1990 PROGRESS REPORT VISTA 1. SDA has received encouraging news from EPA regarding the SARA 313 glycol ethers definition that now includes 1,2, and 3 mole ethoxylates. EPA announced that the agency intends to initiate it's own review and modification of the definition of glycol ethers so as to exclude ethylene oxide based surfactants. This change in EPA's position was evidently prompted by a change in the EPA staffer handling this issue. 2. Beginning 1/1/91, all products identified as marine pollutants will be regulated as "Environmentally Hazardous Substances" by the IMDG Code, the hazardous material regulations for marine shipments. Containers containing these products must display a marine pollutant label as well. Our ethoxylates will be affected by this rule. MJH will be investigating whether any other products are affected. 3. MJH attended a two day HMAC meeting on the International Marine Dangerous Goods (IMDG) Code, which regulates the transport of hazardous materials cargo by water. 4. TGG and MJH met with International Operations and the freight forwarders to review domestic and international hazardous materials transportation regulatory requirements. Xj ------------- - T. G. Grumbles dlj WV OOOOll^Ol