Document KR3j5EoY18vzvx3owrjjBmwmN

Trac-4TM Four-Wheel Alignment Gauge Model 2620 Simplified 4-Wheel Alignment Trac-4 is an uncomplicated 4-Wheel Optical Toe/Track Gauge that simplifies 4-wheel alignment. It's easy to use, rug gedly built and absolutely reliable be cause you can check it lor accuracy and recalibrate the Gauge Arms yourself il il becomes necessary. Trac-4 lets you check and set Toe on Iron! and rear wheels (Eldorado, Riviera, Toronado, Corvette, etc.). On vehicles with solid rear axles, Trac-4 checks front wheel center ing and. if required, indicates how much adjustment is required on front wheel Toe to get perleci straight-ahead 4-wheel tracking. II will find and let you compen sate for spindle setback as well as check for rear axle skew. SetFrontToe With Trac-4 Gauge Arms mounted on front wheels, you can check and set Toe withoul moving from your position under vehicle. A bright buflseye on the Patented high intensity screens gives you the Toe reading for each wheel and shows direc tion to turn tie rod sleeves to set Toe where il belongs. .Powerful permanent magnet locks Gauge .Arm firmly to the wheelspindie or'wheel damp. Model 2620 Trac-4 Optic^Tpe/Track Gauge Verifying Front Wheel Centering Gauge Arms are left in position after set ting front wheel Toe. With Trac Flags mounted on rear wheels, sight through scopes bn each Arm to read numbered line indicated by red dot. (See opposite page). Enter each number on Trac-4 Cal culator. If numbers on both sides of vehi cle are identical, front and rear wheels are centered and no adjustment is reouired. If numbers differ, wheels are not centered. To center wheels, adjust tie rod sleeves until both dots rest on the "average" Flag reading shown on Calculator. ( < mmco 14 Complete; with, Right and Left Gauge Arms,;Trati Flags; Dual;Output Power 'Supply.pPpwer Cords, Trac-4 Calculator. :'CaHbVatitPBar and Clamp. Calibration 'jBaru^fusId to "check Gauge Arms for accuracy/and adjust each Arm lo project a zer$-cinlered butlseye on the opposite Screen. Calibration is not required each time Trac-4 Gauge is used--only if it has been dropped or damaged. Reassurance is easy on your own premises--no need to call the factory or the AMMCO man. Ship. Wt. 56 lbs. (25.4 kg) < NOVO120322