Document KDp269634apwMkoY5jyQbEK

worn when woodworking or cutting tools, such as chisels, brace and bits, planes, scrap ers, and saws, are used head-high or over head, with the chance of particles falling or flying into the eyes Occasionally, the need for eye protection is overlooked on such jobs as cutting wire and cable, striking wrenches, using hand drills, chipping concrete, removing nails from scrap lumber, shoveling material head-high or work ing on the leeward side of a job, and using wrenches and hammers overhead, and on other jobs where particles of materials or de bris may fall References American National Standards Institute, 1430 Broadway, New York, N Y 10018 Safety Code for the Use, Care, and Protection of Abrasive Wheels, B7 1 Safety Requirements for Powder Actuated Fastening Systems, A10 3 Grinding Wheel Institute, 2130 Keith Bldg, Cleveland, Ohio 44115 McMahan, E L and B T Wray Aluminum Paint on Hot Surfaces Aluminum Research Laboratories, New Kensington, Pa National Safety Council, 444 North Michigan Ave, Chicago, 111 60611 Accident Prevention Program for School Shops and Laboratories Industrial Data Sheets Air-Powered Hand Tools, 392 Brush Cutting Tools, 427 Electric Hand Saws (Circular Blade Type), 344 Ground Fault Circuit Interrupters for Personnel Protection, 636 Grounding Portable Electric Equipment, 299 Hand Knives, 369 Hand Soldering and Brazing, 445 Portable Power Cham Saws, 320 Powder-Actuated Hand Tools, 236 Meat Industry Safety Guidelines Powder Actuated Tool Manufacturer's Institute, 331 Madison Ave, New York, N Y 10017 Basic Training Manual Underwriters Laboratories Inc, 207 East Ohio St, Chicago, 111 60611 Underwriters' Reports UL 45, Electric Tools U S Department of Commerce, Office of Technical Services, Washington, D C 20234 Sparking Characteristics and Safety Hazards of Metallic Materials, Technical Report No NCF-T-1-57, PB 131131 U S Department of Labor, Washington, D C 20210 Safe Use of Hand and Portable Power Tools, Bulletin 293 U S Government Printing Office, Superintendent of Documents, Washington, D C 20402 Maintenance and Care of Hand Tools TM-9-867 Federal Specifications for Hammers, Mauls, and Sledges GGG-H-86 1005