Document K6doQwgE37eeGEjZmM38Rexao

Monsanto Chemicals AR0CL0B-L254_____ LUBRICANT AND.PLASTIC1ZER._IN THE MANUFACTURE OF PAPER DRAPERIES Monsanto Technical Bulletin No/ P-138 April 4, 1949 ------------- Monsanto Chemical Company St. Louis 4, Mo. Aroelor* 1854, chlorinated biphenyl, is an efficient, eoonomloal and nonflammable lubricant for the inorganic fire-retardant agents used in making paper draperies that do not support combustion. Also, Aroelor 1854 is an attractive eo-plastielzer for the vinyl coating applied to the paper drapery material to give it a smooth and chintz-like appearance. These specific usee for Aroelor 1854 in manufacturing paper draperies suggest other similar applications for Aroclors in the paper products Industry. Registered in U. s. Patent Office. ffce Wemmiaii la Ms Mletta Is bawd e traded is be betpMl bv< we seaael eesea MGNS 080166 I. INTRODUCTION The popularity of paper draperies in this country has increased because of their economy as well as their highly decorative and aesthetle value. Untreated paper lacks certain physloal quali ties paramount in the use of this material for draperies. To impart required flre-reslstanoe, the paper is usually treated with lnorganlo fire-retardant salts such as ammonium sulfamate or ammonium phosphates. However, treatment of this type pro duces a brittle sheet especially at relatively low humidity conditions as would be encountered in the winter time when the draperies are hung adjacent to radiators. This is prevented by the incorporation of Aroclor 125b alone or in combination with a small amount of polyisobutylene, which serves as a lubricant to give the desired flexibility, softness or hand, and drape. Aroolor 125b is particularly attractive as a permanent and stable lubricant for this purpose because of its fire-retardant qualities, its low vaporization rate, freedom from odor, its outstanding resistance to moisture or water, and its relatively low cost. In contradistinction to the use of a highly water-resistant lubricant, such as Aroclor 125b, in the past the praotloe was to use paper lubricants or softening agents such as glycerine and various glycols which, to a large degree, functioned as humectants. This method of lubrication is objectionable when high humidities prevail, as it is known that such humectant-type lubricants can pick up sufficient moisture so that the drapery materials drip. In addition to its value as a lubricant and fire-retardant, Aroolor 125b appears to have a stabilizing influence on the paper fibers. When lubricants other than Aroclora, especially the humectant type, are used, the fibers seem to lose their abrasion resistance against rubbing with a wet cloth--a factor of Importance when cleaning paper draperies. Another consideration of Importance in preparing paper stock for drapery use is the incorporation of wet-strength qualities essential during processing the paper with the fire-retardant agents and also of merit in the end use of the paper draperies. This is accomplished by customary methods for treating the pulp in the beater with melamine resins and then curing. Slnoe much of the drapery material is used in warm, humid cli mates, it is also good practice to treat the paper with a preservative such as Monsanto's Santobrlte (sodium pentachlorophenate) to protect it against organism attack, particularly 2. huns oauicJ fungi, but also termites. As little as 0.9$ of Santobrlte baaed on the weight of the paper is sufficient to give the desired protection. In general, there are two types or paper drapery materials made. The simplest is the colored and printed paper treated with lubrloated fire-retardant salts. This may be referred to as the plain type drapery material. The seoond type is a similar product but coated with a vinyl resin, such as Qeon 100X-210, or a mixture of this resin with Oeon 100X-26S, plastlolzed with a mixture of fire-retardant plas ticizers. These mixtures may consist of Aroclor 125* in combi nation with trlphenylphosphate and Santlclzer 140, and the vinyl application Is of the type commonly called a plastlsol or paste. This technique for applying the vinyl coating eliminates the use of flammable solvents which cannot be tolerated in paper process ing plants because of the fire hazard. The thin film of vinyl coating gives the draperies a pleasing, smooth and lustrous chlntz-lllce appearance. II. MANUFACTURE OF THE PLAIN TYPE DRAPERIES The wet-strength paper Is treated with an emulsion of the Inor ganic fire-retardant salts and the Aroclor lubricant. Using a padder box, the emulsion Is padded on the paper and then passed through squeeze rolls for Impregnation and resroval of excess quantities of the emulsion. Then the rapidly moving paper strikes a baffle which crepes it. After this, the paper passes over a series of heated dry cans, or a series of seamless infra red gas burners which give proper drying. Sometimes as much as 2.5$ of Aroclor 1254, based on the weight of the treated paper, is used along with a small amount of poly isobutylene to impart the desired lubrloatlng effect. A satisfactory and stable emulsion as used consists of about 2-4$ of Aroclor 1254, 25$ of ammonium sulfamate and 0.5$ of emulsifying agents, with the remainder water. One of the sug gested emulsifying agent combinations Is that of Span and Nopco. Another consists of 0.25$ of Sterox SE and 0.25$ of Tween 00, based on the total weight of the emulsion. It has been our experience that ammonium sulfamate fire-retardant salts are easier to emulsify than dlammonlum phosphate in formu lations of this type. To accomplish a better dlammonlum phosphate emulsion, It Is usually necessary to use a mixture of 75 parts of 3. MOMS 08016a Aroclor 1254 and 25 parts of mineral oil, such as Nujol, and Santomerse S as the emulsifying agent. The suggested emulsion contains 25# of dlasmonium phosphate, 2-4# of the Aroclor-Hujol mixture, 0.5# of Santomerse S, and the remainder water. The paper treated with the fire-retardant emulsion, and then dried. Is finally printed or colored to give the ready-to-use drapery material. III. MANUFACTURE OF VINYL PLASTIC COATED PAPER DRAPERIES The plastic coating, whloh Is usually vinyl resin, such as Oeon 100X-210, or a combination of 75 parts of this resin with 25 parts of Oeon 100X-26S, Is applied to the finished treated paper stock, as described above. Using fire-resistant plasticizers, such as a combination of Aroclor 12^. Santlclser 140 and trlphenylphosphate, a plastlpol or paste Is prepared In the absence of flammable solvents. This vinyl paste Is padded on to the paper which Is then dried at about 30O*F., followed by very rapid fusion at 360F. Usually the vinyl plastic coating on the paper is very thin since the economics Involved In the manufacture of paper draperies do not permit the use of thicker coatings which would be more expen sive. . IV. DERMATOLOOY AND TOXICOLOGY OF AROCLOR 1254 The dermatology and toxloology of Aroclor 1254 are considerations in the use of this material both as a lubricant for the inorganic fire-retardant salts and also as a co-plastlclzer for the vinyl coating applied to the draperies. Skin patch tests, made in accordance with standard procedures and supervised by competent medical personnel, show that Aroclor 1254 alone, when applied to the skin, or when vinyl plastics plas ticized with Aroclor 1254 are applied to the skin, is neither a skin Irritant nor a skin sensitizer. The only point of ooncem In the use of Aroclor 1254 In the manu facture of paper draperies deals with vapors that may be emitted during the drying operations. Although Aroclor 1254 has a low vapor pressure and a relatively low evaporation rate, It must be borne In mind that the material on the paper Is there In an exceedingly thin film. This Is conducive to vaporization. It has been observed that when running only several thousand feet 4. MQNS 080169 of the paper, there Is practloally no build-up of vapora around the processing machinery. However, on large-scale continuous production, vapors of the Aroclor and other ingredients will build up if the processing nachlnery is not properly vented. Aroclor vapors bear a degree of toxicity as reflected by results Indicating that 0.5 mg. of Aroclor 1254 vapor per cubic meter of air Is the maximum amount allowable for safe working condi tions . Accordingly, the machine used for treating the paper should be enclosed, If this Is possible, and always properly vented with forced draft or suction fans. The use of drying rooms or chambers where the paper Is festooned in a relatively unvented and heated atmosphere to effect the dry ing is not to be recommended where either Aroclor 1254 or other chemicals, whose vapors bear a degree of toxicity, are used In the process. The hot air In chambers of this type is normally not vented and would present a hazard In the event of a breakdown when the workmen would have to enter the drying chamber. Although gas masks would be worn by the workmen, this practice Is some what discomforting and not readily acceptable. Mien Aroclor 1254 Is used and the paper Is dried by passage over dry cans or a combination of dry cans and Infrared burners, It Is practicable to enclose this machinery and to vent It properly by using exhaust fans. Under these conditions, the operation appears free from any toxicity hazard. *- * MONSANTO CHEMICAL COMPANY St. Louis 4, Mo. New York-Chloago-Boston-Blrmlngham-Charlotte-Clnclnnatl-Cleveland Detrolt-Fhlladelphla-Los Angeles-San Franciaco-Montreal POBiMAO 1M 5- HUNS 080170