Document JrBDerLmkLDpdLbaNJVX43p0a

U------li V. I ' C. Technical Service Report JOHNS-MANVILLE ELECTRICAL INSULATIONS AND OSHA REQUIREMENTS No___ 126A. Page- 1 Tests conducted without dust control equipment at the Johns-Manville plants, Indicate the following products can be handled and fabricated without exceed ing the asbestos exposure limits established by OSHA. Insulation Type: FLEXIBLE PAPERS & COMPOSITES Fabrication: UNWINDING, REWINDING, SLITTING, SHEARING PRODUCTS: NO. 3000 QUINORGO^ NO. 4000 QUINORGO^ NO. 5000 QUINORGO/ TELGARD A TYPE 5 QUINTERRA TYPE 5 2-PLY QUINTERRA TYPE 3 QUINTERRA TYPE 3 2-PLY QUINTERRA QUINTEX I QUINTEX II QUINTEX ST QUINTEX III PLUS ALL ABOVE PRODUCTS COMBINED WITH GLASS CLOTH OR POLYESTER FILM Insulation Type: ELECTRICAL BOARDS Fabrication: SHEARING AND STEEL RULE DIE PUNCHING PRODUCTS: NO. 1100 QUINORGOBORD NO. 1200 QUINORGOBORD TYPE 3 QUINTERRABORD QUINTEXBORD TX-6 QUINTEXBORD ST QUINTEXBORD STC TV BORD When sawing any of these materials on a band saw or table saw adequate dust control must be Installed on the sawing equipment. NOTE: The J-M tests were performed to provide information of general interest. The resultant data does not relieve users of these products from the requirements of sampling their own work areas as established by OSHA regulations. See data page DT-111A for details of J-M tests. vsi Jonns Manviue electrical insulation OT-ttA Utfto In U.S.A. PlANTfPS EXHBIT \jJW-S"V