Document Jak8nk01QD460JMeVYovVM1a

March 6, 1974 Supersedes Formula V-97' Dated 2/22/74 MILFORD, VIRGINIA, PLANT READY MIX JOINT COMPOUND Y-979 (HAND TOOLS) PLAINTIFF'S EXHIBIT DESCRIPTION OF PRODUCT - White ready mix joint compound used for taping, topping, and texturing FORMULA Raw Material Function RM Spec Percent Lbs/Batch **Water PVA Emulsion NALC0 Asbestos 7RF09 Troysan Omp-lO-Sep PV Alcoh 1 NatrosojL 250 HXR Mica Asbestos SG-210 Limestone Calgon T Solvent Adhesive Antifoaming Agent Bulking Agent Bactericide Adhesive Thickner Anticracking Agent Bulking Agent Filler Dispersant -- 185 125 9 193 162 170 11 18 13 229 7.00 .10 3.92 .10 .75 . /O 8.79 1.25 77.19 .20 1100(131gal 140.0 2.0 78.0 2.0 15.0 14.0 175.0 25.0 1537.0 4.0 100.00 3092.0*** ** Approximately 54.4 lbs/100 lbs of active ingredients (this may vary 4 gallons per batch. *** One batch yields 50 - 1 five gallon pail Ready Mix joint compound at 62 lbs/pail. WORKING CONSISTENCY Specifications for Paste: Brabender: WORKING PROPERTIES Specii'ication's - Refer to Plant Testing Procedure No. 32; If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust. 560 20 - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing. BONDING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 35* After comixiund has dried, tape shall show at least 90$'fiber tear when delaminated. CRACK RESISTANCE Specifications COLOR "Specifications - Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. - White Dried compound shall match color of standard sample. -/ Denotes change in this re-issue. . 1 MAY 26 '92 12:28 SGP 0018334 4043816356 PAGE.002 February 22, 1974 Supersedes Formula V-979 Dated 1/15/74 MILFORD, VIRGINIA, PLANT READY MIX JOINT COMPOUND V-979 (HAND TOOLS) DESCRIPTION OF PRODUCT - White ready mix joint compound used for taping, topping, and texturing -/ FORMULA Raw Material Function RM Spec Percent Lbs/Batch **Water PVA Emulsion NALCO Asbestos 7RF09 Troysau Cmp-10-Sep PV Alcohol Natrosol 250 HXK Mica Asbestos SG-210 Limestone Calgon T Solvent Adhesive Antifoaming Agent Bulking Agent Bactericide Adhesive Thickner Anticracking Agent Bulking Agent Filler Dispersant -- IS 5 125 9 193 162 170 11 18 13 229 7.00 .10 3.92 .10 .75 .70 8.79 1.25 77.19 .20 100.00 1100(131gal 140.0 2.0 78.0 2.0 15.0 14.0 175.0 25.0 1537.0 4.0 3092,0*** ** Approximately 54.4 lbs/100 lbs of active ingredients (this may vary 4 gallons per batch. *** One batch yields 50-1 five gallon pail Ready Mix joint compound at 62 lbs/pail. WORKING CONSISTENCY Specifications for Paste: Brabender: WORKING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 32j If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust. 580 - 20 - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undispersed particles. Material shall be free from lumps due to incomplete mixing. BONDING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75$ fiber tear when delaminated. CRACK RESISTANCE Specifications' - Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications - White Dried compound shall match color of standard sample. -/ Denotes change in this re-issue. MAY 28 '92 12:29 404981G356 PAGE.003 SGP 0018335 January 15> 1974 Supersedes Formula V-979 Dated 10/18/73 MILFORD, VIRGINIA, PLANT READY MIX JOINT COMPOUND V-979 (HAND TOOLS) DESCRIPTION OF PRODUCT - White ready mix joint compound used for taping, topping, and texturing FORMULA Raw Material Function RJM Spec Percent Lbs/Batch **Water PVA Emulsion NALCO Asbestos 7RF09 Troysan Cmp-10-Sep PV Alcohol Natrosol 250 HXR Mica Asbestos SG-210 Limestone Calgon T Solvent Adhesive Antifoaraing Agent Bulking Agent. Bactericide Adhesive Thickner Anticracking Agent Bulking Agent Filler Dispersant 135 125 9 193 162 170. 11 18 13 229 7.40 .10 3.92 .10 .74 - .69 6.46 1.62 78.74' .23 148.0 2.0 78.0 2.00 15.0 14.0 129.0 32.0 1576.0 4.0 100.00 3100.0**** **Approximately 54.4 lbs/100 lbs. of active ingredients (this may vary 4 gallons per batch. ***One batch yields 50+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. ~ WORKING CONSISTENCY Specifications for Paste: Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust. Brabender: 580 20 WORKING "PROPERTIES Specifications Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undisperse'4 particles. Material shall be free from lumpf. due to incomplete mixing. BONDING PROPERTIES S pe cifications Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75# fiber tear when delaminated. CRACK RESISTANCE Specifica tion s COLOR Specifications Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. > White Dried compound shall match color of standarc sample. -/ Denotes change in this re-issue. WNO:i* MAY 26 '92 12:30 4049816356 PAGE.004 SGP 0018336 October .18, i9V,> Supersedes Formula V-979 Dated 10/17/73 MILFORD, VIRGINIA, PLANT READY MIX JOINT COMPOUND V-979 (HAND TOOLS) 3n DESCRIPTION OF PRODUCT - White ready mix joint compound used for taping, topping, and texturing FORMULA Raw Material Function RM Spec Percent Lbs/Batch / **Water ^ FVA Emulsion NALCO Asbestos 7RF09 Troysan Cmp-10-Sep PV Alcohol *Thickmer Mica Asbestos SG-210 Limestone Solvent Adhesive Antifoaming Agent Bulking Agent Bactericide Adhesive Thickner Anticracking Agent bulking Agent Filler -- 185 7.40 125 .10 9 3.92 193 .10 162 .74 170or223 .69 11 6.46 18 1.62 13 73.97 1100(131gals) 148.0 2.0 78.0 2.00 s 15.0 14.0 129.0 32.0 1580.0 100.00 3100.0*** *Natrosol 250 HXR or Genfriv 4925 **Approximately 54.4 lbs/100 lbs. of active ingredients (this may vary i -/ 4 gallons per batch. ***0ne batch yields 50+1 five gallon pail Ready Mix joint compound at 62 lbs/pail. - WORKING CONSISTENCY Specifications for Paste: - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency, a maximum of 5 cc. water per 150 grams of paste may be added to adjust. Brabender: 540 20 WORKING PRO PERTIES Specifications : - Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty, or undisperse'1-, particles. Material shall be free from lumpj. due to incomplete mixing. BONDING PROPERTIES Specifications - Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 75# fiber tear when delaminated. CRACK RESISTANCE Specifications - Refer to Plant Testing Procedure No. 37. There shall be no large fissure cracks in the wedge, and no cracks in the thinner half of the wedge. COLOR Specifications - White Dried compound shall match color of standard sample. -/ Denotes change in this re-issue. WNG:jg MAY 26 '92 12:31 4049816356 PAGE.005 SGP 0018337 October 17, J771 Gmx:ryc:fJou Formula V-979 Dated 7/12/73 MILFORD, VIRGINIA, PLANT READY MIX JOINT COMPOUND V-979 (HAND TOOLS) PP'.GCKl PTION OF PRODUCT - White ready mix joint compound u:;orJ lor taping, topping, and texturing FORME'LA Haw Material V/a t o ' PVA Knmlsion NALCO Asbestos 7RF09 V Troysan Cinp-10-Sep PV Alcohol Thickner Mica Asbestos SG-210 Limestone Function RM Spec Percent Solvent Adhesive Antifoaming Agent Bulking Agent Bactericide Adhesive Thickner Anticracking Agent . Bulking Agent Filler -- Id 5 7.40 125 9 193 162 .10 3.92 .10 74 170or223 .69 11 6.46 18 1.6? 13 78.97 100.00 Lbs/ka tch 1100(1.31 gal 148.0 2.0 .') .r-o 4.f' 1 '. j : ;!/! Vf> 1 3.1'iO.r; Mfatrosol 250 HXR or Genfriv 4925 ^Approximately 54.4- lbs/100 lbs. of active ingredients (this na: "jr 4 gallons per batch. **Onc batch yields 50+1 five gallon pail Ready Mix joint comjv >. ] at-. 62 lbs/pail. WORKTl'C, CONSISTENCY Specifications for Paste: - Refer to Plant Testing Procedure No. 32. If paste is not proper working consistent:;. a maximum of 5 cc. water per 150 gratis of pot? may be added to adjust. Brabender: 540 - 20 WORKTUG PROPERTIES Specifications - Refer to Plant Testing Procedure No. Compound shall be plastic, buttery w.- 'king, and free of any coarse, gritty, or air `aspersed particles. Material shall be i'rec f <v.'. lumps due to incomplete mixing. BONDING PROPERTIES Specifications - Refer to Plant Testing Procedure- i'o. i5. After compound has dried, tape sk-fi show at least 757* fiber tear when delaminated. CRACK RESISTANCE Specifications COLOR Specifications - Refer to Plant Testing Procedure no. There shall be no large fissure crack., `n the wedge, and no cracks in the thinner hull' of the wedge. - White Dried compound shall match color of standard sample. -/ Denotes change in this re-issue. WNG: jg MAY 26 '92 12:32 4049816356 PAGE.006 SGP 0018338 SGP 0018333 M ILF O R D FO RM ULA #979 ASBESTOS CONTAINING PRODUCTS