Document J3dKKrZj3vLbk89rGQ8ZdGz4O

i2 132 Page 82 T"v-' BBAI0IM6VSTEM fol Air 1 February 19B0 v" 12 HI BRAKES - ADJUST font and (tear 1. Chock the wheels, jack up the vehicle and tit stands. Rdfeaae the path Drake. 2. Spin the wfrM* *nd check that the buuiiimpi jR free running. 3. Enaura that brafca drums we cold. Tg ' cfecjnsNs, wf#w turning the < i normal {fraction of rotation, until thef are in firm cdntact with the drum, pn the wheel from being rotated. 4. Back-off the adjuster anti-clockwise until.the shoes are just dear of the drum and the wheel can be routed freely without binding. 6. Repeat the adjustment for the remaining wheels. 6. Remove the stands and lower the vehicle to the ground. 12 2S3 BRAKE SHOES - FRONT BRAKE REMOVE AND INSTALL 1b Remove ___ WARNING: Brake lining dust is injurious to health If Inhaled and proper care must be taken when cleaning the brake drums and/or brake bookplates. __________ 1. Disconnect the battery earth I -) cable, chock the wheels, jack-up the vehicle and fit stands. 2. Slacken off the brake adjusters, and wind out and remove the spring brake release bolt. 3. Using a wheel trolley, remove the wheel and brake drum assembly as one unit, as detailed in Operation 14 371. 4. Using Girling Tool No. 649 47016 lever the lower end of the shoe from the adjuster, pud the shoe from the backplate to clear the adjuster and release the shoe. Both shoes can now be removed together with the springs. 5. Wire the tappets to keep them retracted. 6. Note the position of the retracting springs and remove the springs from the shoes. Remove the spring clips and bellcrank pivot pins, releasing the strut. Remove the strut from the shoes. To Install 7. Refit the bell crank struts and pivot pins to the upper brake shoes. Refit the spring clips, noting that the central tongue of the clip tensions the bell cranks against the struts. t. A4uM*r. t. Adjuster. It HFM - 005845 1. Retracting spring. 2. Expander. 3. Adjuster. PQ8006 1259