Document GzX5Kn1w5r96JkqzLNvRrb63x

SJ~pmh j. R>x | TLVs--------------- | Threshold Limit Values for Chemical Substances and Physical Agents 1 in the Workroom Environment K with m Intended Changes for 1980 i SC 008299 LAM009509 Copyright 1980 by American Conference of Govern mental Industrial Hygienists. ISBN: 0-936712-29-5 This book is fully protected by copyright and no part of it may be reproduced in any form, by print, photo print, microfilm, or any other means without written permission from the American Conference of Governmental Industrial Hygienists, P.O. Box 1937, Cincinnati, Ohio 45201. PRICE EACH 1-49................... 50-199............... 200-999 ............ 1000-4999........ 5000 or more.... ........... $2.00 ............ 1.75 ............ 1.50 ............ 1.25 ........... 1.00 Documentation of the Threshold Limit Valuess: A sepa rate companion piece to the TLVs is issued by ACGIH under this title. This publication gives the pertinent sci entific information and data with reference to literature sources that were used to base each limit. Each docu mentation also contains a statement defining the type of response against which the limit is safeguarding the worker. For a better understanding of the TLVs it is es sential that the Documentation be consulted when the TLVs are being used. Information concerning the availability of copies of the Documentation of the Threshold Limit Values should be directed to the Publications Office, ACGIH, P.O. Box 1937, Cincinnati, OH 45201. f TLVs Threshold Limit Values for Chemical Substances in Workroom Air Adopted by ACGIH for 1980 008300 SC f L LAM009510 1980 TLV AIRBORNE CONTAMINANTS COMMITTEE The Conference appreciates the untiring guidance Dr. Elkins has given the TLV Airborne Contaminants Committee over these past years. We wish him well in his retirement. 1979--1980 INTERIM TLV AIRBORNE CONTAMINANTS COMMITTEE Hervey B. Elkins, Ph.D., Retired -- Chairman through April 30, 1980 Charles E. Adkins, OSHA Mary O. Amdur, Ph.D., Massachusetts Institute of Technology Faye J. Bowman, Ph. D., Tennessee Valley Authority Paul E. Caplan, P.E., M.P.H., NIOSH James W. Hammond, University of Texas Trent R. Lewis, Ph.D., NIOSH Jesse Lieberman, P.E., USN Keith R. Long, Ph.D., University of Iowa Floyd A. Madsen, OSHA Frederick T. McDermott, Michigan Dept, of Public Health Walter W. Melvin, Jr., M.D., Sc.D., Colorado State Uni versity Leonard D. Pagnotto, Massachusetts Dept, of Labor & Industry -- Secretary Meier Schneider, P.E., C.I.H., City of Los Angeles Richard D. Stewart, M.D., Medical College of Wiscon sin Vera F. Thomas, Ph.D., University of Miami William D. Wagner, NIOSH Elizabeth K. Weis burger, Ph.D., National Cancer Insti tute Vernon L. Carter, COL., USAF -- Chairman, appointed May 1980 CONSULTANTS Hector P. Blejer, M.D. Marshall Steinberg, Ph. D. Paul Gross, M.D. Theodore R. Torkelson, Sc.D. Ernest Mastromatteo, M.D. Ralph C. Wands James F. Morgan Mitchell R. Zavon, M.D. Any comments or questions regarding these limits should be addressed to: Executive Secretary American Conference of Governmental Industrial Hygienists P.O. Box 1937 Cincinnati OH 45201: (513)661-7881 TABLE OF CONTENTS Chemical Substances Page Preface................................................................... Threshold Limit Values and Short Term Expo sure Limits.......................................................... Radioactivity.......................................................... Mineral Dusts......................................................... Nuisance Particulates............................................ Notice of Intended Changes.................................. Appendices A. Carcinogens................................................ B. Substances of Variable Composition......... C. Mixtures: Calculation of TLVs.................... E. Nuisance Particulates................................. F. Asphyxiants................................................. G. Conversion of Particle Count to Mass........ 2 9 32 33 34 35 40 46 47 51 51 51 Physical Agents Preface................................................................... Threshold Limit Values Heat Stress......................................................... Ionizing Radiation.............................................. Lasers................................................................. Microwaves........................................................ Noise................................................................... Impulsive or Impact Noise.................................. Ultraviolet Radiation........................................... Notice of Intended Changes.................................. Notice of Intent: Light and Near-Infrared Radiation.................... Ai rborne Upper Sonic and Acoustic Radiation.. Pulsed Ultraviolet Laser Exposures For Expo sure Duration Less Than One Millisecond..... Agents Under Study............................................ 57 58 66 66 81 82 84 84 88 89 92 92 93 SC 008301 LAM009511 sc 008302 PREFACE CHEMICAL CONTAMINANTS Threshold limit values refer to airborne concentra tions of substances and represent conditions under which it is believed that nearly all workers may be re peatedly exposed day after day without adverse ef fect. Because of wide variation in individual suscepti bility, however, a small percentage of workers may experience discomfort from some substances at con centrations at or below the threshold limit; a smaller percentage may be affected more seriously by aggra vation of a pre-existing condition or by development of an occupational illness. Tests are available (J. Occup. Med. 15: 564, 1973; Ann. N.Y. Acad. Sci., 151, Art. 2: 968, 1968) that may be used to detect those individuals hypersusceptible to a variety of industrial chemicals (respiratory irri tants, hemolytic chemicals, organic isocyanates, car bon disulfide). Three categories of Threshold Limit Values (TLVs) are specified herein, as follows: a) 'Threshold Limit Value-Time Weighted Average (TLV-TWA) -- the time-weighted average concentra tion for a normal 8-hour workday or 40-hour work week, to which nearly all workers may be repeatedly exposed, day after day, without adverse effect. b) Threshold Limit Value-Short Term Exposure Limit (TLV-STEL) -- the maximal concentration to which workers can be exposed for a period up to 15 minutes continuously without suffering from 1) irrita tion, 2) chronic or irreversible tissue change, or 3) narcosis of sufficient degree to increase accident proneness, impair self-rescue, or materially reduce work efficiency, provided that no more than four ex cursions per day are permitted, with at least 60 min utes between exposure periods, and provided that the daily TLV-TWA also is not exceeded. The STEL should be considered a maximal allowable concentra tion, or ceiling, not to be exceeded at any time during the 15-minute excursion period. STELs are based on one or more of the following criteria: (1) Adopted TLVs including those with a "C" or ``ceiling" limit. (2) Pennsylvania Short-Term Limits for Exposure to Air borne Contaminants (Penna. Dept, of Hlth., Chapter 4, Art. 432, Rev. Jan. 25, 1968). (3) OSHA Occupational Safety and Health Standards, 40 FR 23073, May 28, 2 1975. (4) NIOSH criteria for recommended standards for occupational exposure to specific substances. The TWA-STEL should not be used as engineering design criterion or considered as an emergency expo sure level (EEL). c) Threshold Limit Value-Ceiling (TLV-C) -- the concentration that should not be exceeded even in stantaneously. For some substances, e.g., irritant gases, only one category, the TLV-Ceiling, may be relevant. For other substances, either two or three categories may be rel evant, depending upon their physiologic action. It is important to observe that if any one of these three TLVs is exceeded, a potential hazard from that sub stance is presumed to exist. The TLV-TWA should be used as guides in the control of health hazards and should not be used as fine lines between safe and dangerous concentra tions. Time-weighted averages permit excursions above the limit provided they are compensated by equiva lent excursions below the limit during the workday. In some instances it may be permissible to calculate the average concentration for a workweek rather than for a workday. The relationship between threshold limit and permissible excursion is a rule of thumb and in certain cases may not apply. The amount by which threshold limits may be exceeded tor short periods without injury to health depends upon a number of factors such as the nature of the contaminant, whether very high concentrations -- even for short periods -- produce acute poisoning, whether the ef fects are cumulative, the frequency with which high concentrations occur, and the duration of such periods. All-factors must be taken into consideration in arriving at a decision as to whether a hazardous condition exists. Threshold limits are based on the best available information from industrial experience, from experi mental human and animal studies, and, when possi ble, from a combination of the three. The basis on which the values are established may differ from sub stance to substance; protection against impairment of health may be a guiding factor for some, whereas reasonable freedom from irritation, narcosis, nui sance or other forms of stress may form the basis for others. The amount and nature of the information avail able for establishing a TLV varies from substance to substance; consequently, the precision of the esti mated TLV is also subject to variation and the latest 3 LAM009512 sc Documentation should be consulted in order to assess the extent of the data available for a given sub stance. The committee holds to the opinion that limits based on physical irritation should be considered no less binding than those based on physical impair ment. There is increasing evidence that physical irri tation may initiate, promote or accelerate physical im pairment through interaction with other chemical or biologic agents. In spite of the fact that serious injury is not be lieved likely as a result of exposure to the threshold limit concentrations, the best practice is to maintain concentrations of all atmospheric contaminants as low as is practical. These limits are intended for use in the practice of industrial hygiene and should be interpreted and ap plied only by a person trained in this discipline. They are not intended for use, or for modification for use, (1) as a relative index of hazard or toxicity, (2) in the evaluation or control of community air pollution nui sances, (3) in estimating the toxic potential of contin uous, uninterrupted exposures or other extended work periods, (4) as proof or disproof of an existing disease or physical condition, or (5) for adoption by countries whose working conditions differ from those in the United States of America and where substances and processes differ. Ceiling vs Time-Weighted Average Limits. Al though the time-weighted average concentration pro vides the most satisfactory, practical way of monitor ing airborne agents for compliance with the limits, there are certain substances for which it is inappro priate. In the latter group are substances which are predominantly fast acting and whose threshold limit is more appropriately based on this particular re sponse. Substances with this type of response are best controlled by a ceiling "C" limit that should not be exceeded. It is implicit in these definitions that the manner of sampling to determine noncompliance with the limits for each group must differ; a single brief sample, that is applicable to a "C" limit, is not appropriate to the time-weighted limit; here, a suffi cient number of samples are needed to permit a timeweighted average concentration throughout a com plete cycle of operations or throughout the work shift. Whereas the ceiling limit places a definite bounda ry which concentrations should not be permitted to exceed, the time-weighted average limit requires an explicit limit to the excursions that are permissible above the listed values. It should be noted that the 4 same factors are used by the Committee in determin ing the magnitude of the value of the STELs, or whether to include or exclude a substance for a "C" listing. "Skin" Notation. Listed substances followed by the designation "Skin" refer to the potential contribu tion to the overall exposure by the cutaneous route including mucous membranes and eye, either by air borne, or more particularly, by direct contact with the substance. Vehicles can alter skin absorption. This at tention-calling designation is intended to suggest ap propriate measures for the prevention of cutaneous absorption so that the threshold limit is not invalid ated. Mixtures. Special consideration should be given also to the application of the TLVs in assessing the health hazards which may be associated with expo sure to mixtures of two or more substances. A brief discussion of basic considerations involved in devel oping threshold limit values for mixtures, and meth ods for their development, amplified by specific ex amples are given in Appendix C. Nuisance Particulates. In contrast to fibrogenic dusts which cause scar tissue to be formed in lungs when inhaled in excessive amounts, so-called "nui sance" dusts have a long history of little adverse ef fect on lungs and do not produce significant organic disease or toxic effect when exposures are kept under reasonable control. The nuisance dusts have also been called (biologically) "inert" dusts, but the latter term is inappropriate to the extent that there is no dust which does not evoke some cellular response in the lung when inhaled in sufficient amount. Howev er, the lung-tissue reaction caused by inhalation of nuisance dusts has the following characteristics: (1) The architecture of the air spaces remains intact. (2) Collagen (scar tissue) is not formed to a significant extent. (3) The tissue reaction is potentially reversible. Excessive concentrations of nuisance dusts in the workroom air may seriously reduce visibility, may cause unpleasant deposits in the eyes, ears and nasal passages (Portland Cement dust), or cause injury to the skin or mucous membranes by chemical or me chanical action per se or by the rigorous skin cleans ing procedures necessary for their removal. A threshold limit of 10 mg/m3, or 30 mppcf, of total dust < 1% quartz, or, 5 mg/m3 respirable dust is rec ommended for substances in these categories and for which no specific threshold limits have been as signed. This limit, for a normal workday, does not apply to brief exposures at higher concentrations. 5 LAM009513 sc 008304 Neither does it apply to those substances which may cause physiologic impairment at lower concentra tions but for which a threshold limit has not yet been adopted. Some nuisance particulates are given in Ap pendix E. Simple Asphyxiants --"Inert" Gases or Vapors. A number of gases and vapors, when present in high concentrations in air, act primarily as simple asphyx iants without other significant physiologic effects. A TLV may not be recommended for each simple as phyxiant because the limiting factor is the available oxygen. The minimal oxygen content should be 18 percent by volume under normal atmospheric pres sure (equivalent to a partial pressure, p02 of 135 mm Hg). Atmospheres deficient in O2 do not provide ade quate warning and most simple asphyxiants are odorless. Several simple asphyxiants present an ex plosion hazard. Account should be taken of this fac tor in limiting the concentration of the asphyxiant. Specific examples are listed in Appendix F. Physical Factors. It is recognized that such physi cal factors as heat, ultraviolet and ionizing radiation, humidity, abnormal pressure (altitude) and the like may place added stress on the body so that the ef fects from exposure at a threshold limit may be al tered. Most of these stresses act adversely to increase the toxic response of a substance. Although most threshold limits have built-in safety factors to guard against adverse effects to moderate deviations from normal environments, the safety factors of most sub stances are not of such a magnitude as to take care of gross deviations. For example, continuous work at temperatures above 90F, or overtime extending the workweek more than 25%, might be considered gross deviations. In such instances judgment must be exer cised in the proper adjustments of the Threshold Limit Values. Biologic Limit' Values (BLVs). Other means exist and may be necessary for monitoring worker expo sure other than reliance on the Threshold Limit Val ues for industrial air, namely, the Biologic Limit Val ues. These values represent limiting amounts of substances (or their effects) to which the worker may be exposed without hazard to health or well-being as determined in his tissues and fluids or in his exhaled breath. The biologic measurements on which the BLVs are based can furnish two kinds of information useful in the control of worker exposure: (1) measure of the individual worker's over-all exposure; (2) mea sure of the worker's individual and characteristic re sponse. Measurements of response furnish a superior 6 j estimate of the physioldgic status of the worker, and may be made of (a) changes in amount of some criti cal biochemical constituent, (b) changes in activity of a critical enzyme, (c) changes in some physiologic function. Measurement of exposure may be made by (1) determining in blood, urine, hair, nails, in body tis sues and fluids, the amount of substance to which the worker was exposed; (2) determination of the amount of the metabolite(s) of the substance in tissues and fluids; (3) determination of the amount of the sub stance in the exhaled breath. The biologic limits may be used as an adjunct to the TLVs for air, or in place of them. The BLVs, and their associated procedures for determining compliance with them, should thus : be regarded as an effective means of providing health surveillance of the worker. I Unlisted Substances. Many substances present or handled in industrial processes do not appear on the TLV list. In a number of instances the material is rare ly present as a particulate, vapor or other airborne contaminant, and a TLV is not necessary. In other cases sufficient information to warrant development of a TLV, even on a tentative basis, is not available to the Committee. Other substances, of low toxicity, could be included in Appendix E pertaining to nui sance particulates. This list (as well as Appendix F) is not meant to be all inclusive; the substances serve only as examples. In addition there are some substances of not in considerable toxicity, which have been omitted pri marily because only a limited number of workers (e.g., employees of a single plant) are known to have potential exposure to possibly harmful concentra tions. "Notice of Intent." At the beginning of each year, proposed actions of the Committee for the forthcom ing year are issued in the form of a "Notice of Intend ed Changes." This Notice provides not only an oppor tunity for comment, but solicits suggestions of substances to be added to the list. The suggestions should be accompanied by substantiating evidence. The list of Intended Changes follows the Adopted Val ues in the TLV booklet. Values listed in parenthesis in the "Adopted" list are to be used during the period in which a proposed change for that Value is listed in the Notice of Intended Changes. Legal Status. The Threshold Limit Values, as is sued by ACGIH, are recommendations and should be used as guidelines for good practices. Wherever these values (of whatever year) have been used or in cluded by reference in Federal and/or State statutes 7 LAM009514 and registers, the TLVs do have the force and effects of law. Reprint Permission. This book is fully protected by copyright and no part of it may be reproduced in any form, by print, photoprint, microfilm or any other means without written permission from the American Conference of Governmental Industrial Hygienists, Inc., P.O. Box 1937, Cincinnati, OH 45201. 8 ADOPTED VALUES TENTATIVE VALUES TWA STEL Substance ppnr' mg/m3'" ppm01 mg/m3'" Abate......................... _ Acetaldehyde............... 100 Acetic acid.................. 10 C Acetic anhydride.......... 5 ** Acetone...................... (1,000) Acetonitrile.................. 40 Acetylene..................... F Acetylene dichloride, see 1, 2-Dichloroethylene . 200 Acetylene tetrabromide... 1 * Acetylsalicylic acid (Asprin) .................. -- Acrolein...................... 0.1 Acrylamide -- Skin....... -- ** Acrylonitrile -- Skin...... (Alb) Aldrin -- Skin.............. -- Allyl alcohol -- Skin..... 2 Ally! chloride................ 1 Allyl glycidyl ether (AGE) -- Skin.......... 5 Allyl propyl disulfide...... 2 Aluminum metal and oxide....................... -- Aluminum pyro powders. -- Aluminum welding fumes -- Aluminum, soluble salts. -- Aluminum, alkyls (NOC)* -- Aluminum oxide (AI2O3).. -- 4-Aminodiphenyl -- Skin -- 2-Aminoethanoi, see Ethanolamine............ 3 2-Aminopyridine.......... 0.5 3-Amino 1, 2, 4-triazole . A2 Ammonia..................... 25 Ammonium chloride-fume.......... -- Ammonium sulfamate (Ammate)................ -- n-Amyl acetate............. 100 sec-Amyl acetate.......... 125 " Aniline & homoiogues -- Skin.. 2 10 _ 180 150 25 15 20 -- (2,400) (1.250) 70 60 ---- 790 250 15 1.5 5 0.25 0.3 (Alb) 0.25 5 3 -- 0.3 -- -- -- 4 2 22 10 12 3 10 -- 5-- 5-- 2-- 2-- E-- Alb -- 86 22 A2 -- 18 35 10 -- 10 -- 530 150 670 150 10 5 20 270 37 -- (3,000) 105 -- 1,000 20 -- 0.8 0.6 -- 0.75 10 6 44 18 20 -- -- -- -- 20 Alb 15 4 -- 27 20 20 800 800 20 Capital letters refer to Appendices. Footnotes (a thru f) see Page 32. *1980 Addition "See Notices of Intended Changes 9 SC 008305 LAM009515 Substance ADOPTED VALUES TWA ppm"' mg/m3*' TENTATIVE VALUES STEL ppm' mg/m3*' Anisidine (o-. p-isomers) -- Skin.... Antimony & Compounds (as Sb).................... Antimony trioxide, handling and use (as Sb)......................... Antimony trioxide production............... ANTU (a-Naphthyl thiourea)................. Argon......................... 1 Arsenic & soluble compounds, as As..... Arsenic trioxide production............... Arsine........................ Asbestos, see MINERAL DUSTS .................... Asphalt (petroleum) fumes...................... Atrazine ...................... Azinphos-methyl -- Skin Barium (soluble compounds), as Ba.... Baygon (propoxur)....... ' Baytex, see Fenthion..... Benomyl...................... Benzene ...................... Benzidine production -- Skin.... p-Benzoquinone, see Quinone.................. Benzoyl peroxide.......... Benzo(a)pyrene............ Benzyl chloride............. Beryllium..................... Biphenyl...................... Bismuth telluride.......... Bismuth telluride, Se-doped................. 0.1 0.5 (0.5) -- 0.5 -- A2 -- 0.3 F-- -- 0.2 -- A2 0.05 0.2 -- Ala --5 -- 10 -- 0.2 -- -- -- -- 10, A2 0.5 0.5 0.1 10 30, A2 -- (Alb) 0.1 0.4 --5 -- A2 15 -- 0.002, A2 0.2 1.5 -- 10 --5 -- -- -- -- F -- -- -- -- -- -- -- -- -- -- -- 25, A2 -- 0.3 ---- -- -- 0.6 -- -- Capital letters refer to Appendices. Footnotes (a thro f) see Page 32. "1980 Addition. "See Notice of Intended Changes. -- -- -- 0.9 F -- _ --- Ala 10 -- 0.6 -- 2 0.3 15 75, A2 (Alb) 2 -- A2 -- -- 4 20 10 10 ADOPTED VALUES TWA Substanceppm01 mg/m3*' TENTATIVE VALUES STEL ppm01 mg/m3*' Borates, tetra, sodium salts, Anhydrous............... Decahydrate............. Pentahydrate............ Boron oxide................. Boron tribromide.......... C Boron trifluoride.......... Bromacil..................... Bromine...................... Bromine pentafluoride.... Bramochloromethane, see Chlorobromomethane. Bromoform -- Skin...... Butadiene (1, 3-butadiene)............. ** Butane........................ Butanethiol, see Butyl mercaptan............... 2-Butanone, see Methyl ethyl ketone (MEK).... ** 2-Butoxyethanol (Butyl Cellosolve) --Skin.... n-Butyl acetate............. sec-Butyl acetate.......... tert-Butyf acetate.......... Butyl acrylate............... C n-Butyl alcohol -- Skin.. ** sec-Butyl alcohol.......... tert-Butyl alcohol.......... C Butylamine -- Skin....... C tert-Butyl chromate (as Cr03> -- Skin.......... ** n-Butyl glycidyl ether (BGE)...................... n-Butyl lactate.............. Butyl mercaptan........... o-sec-Butylphenol -- Skin........................ p-tert-Butyltoluene........ _ -- -- -- 1 1 1 0.1 0.1 200 0.5 1,000 (600) 0.5 200 (50) 150 200 200 10 50 (150) 100 5 _ (50) 5 0.5 5 10 1 5 i 10 10 3 10 0.7 0.7 1,050 5 2,200 (1,430) 1.5 590 (240) 710 950 950 55 150 (450) 300 15 0.1 (270) 25 1.5 30 60 _ -- -- -- 3 -- 2 0.3 0.3 250 -- 1,250 (750) _ 300 (150) 200 250 250 -- -- -- 150 -- -- -- -- -- _ 20 _ -- -- 20 30 -- 20 2 2 1,300 -- 2,750 (1,780) -- 885 (720) 950 1,190 1,190 -- -- -- 450 -- -- -- -- -- _ 120 Capital letters refer to Appendices. '1980 Addition. "See Notice of Intended Changes. 11 sc 008306 LAM009516 sc 008307 Substance Cadmium, dust & salts _ (as Cd) ................... C Cadmium oxide fume (as Cd)....................... . * Cadmium oxide production (as Cd)..... Calcium carbonate/ marble..................... Calcium cyanamide....... Calcium hydroxide........ Calcium oxide.............. Camphor, synthetic....... Caprolactam Dust....................... Vapor...................... Captafol (Difolatan) -- Skin... Captan ........................ Carbaryl (Sevin)......... Carbofuran (Furadan).. Carbon black............... Carbon dioxide............. * Carbon disulfide -- Skin Carbon monoxide......... Carbon tetrabromide.... " Carbon tetrachloride -- Skin.. Carbonyl chloride (Phosgene).......... " Carbonyl fluoride.......... Catechol (Pyrocatechol).. Cellulose (paperfiber).... Cesium hydroxide......... Chlordane -- Skin........ Chlorinated camphene -- Skin..... Chlorinated diphenyl oxide....................... Chlorine...................... Chlorine dioxide............ C Chlorine trifluoride........ ADOPTED VALUES TWA ppmal mg/m3" TENTATIVE VALUES STEL ppm01 mg/m3" _ __ -- -- -- 2 5 _ -- -- -- -- 5,000 10 50 0.1 (10) 0.1 (5) 5 -- -- -- 1 0.1 0.1 0.05 _0.05 _(A2) E_ 0.5 -- 5-- 2-- 12 3 0.2 _ 20 1 -- -- 18 1 20 10 3 40 0.1 5 5 0.1 3.5 9,000 30 55 1.4 --' -- -- -- -- 15,000 -- 400 0.3 _ 15 10 -- 7 18,000 -- 440 4 (65) (20) 0.4 _ (15) -- 20 -- E-- 2-- 0.5 -- (130) _ -- -- 20 -- 2 0.5 1 0.5 33 0.3 0.3 0.4 " 2 9 0.9 Capital letters refer to Appendices. *1980 Addition. ' 'See Notice of Intended Changes. 12 Substance C Chloroacetaldehyde....... crChloroacetophenone (Phenacyl chloride).... * Chloroacetyl chloride..... Chlorobenzene (Monochlorobenzene). " o-Chlorobenzylidene malononitrile -- Skin . Chlorobromomethane.... * 2-Chloro-1,3-butadiene, see 0 Chloroprene -- Skin........................ Chlorodifluoromethane. Chlorodiphenyl (42% Chlorine) -- Skin...... Chlorodiphenyl (54% Chlorine) -- Skin...... 1-Chloro, 2, 3-epoxy-propane (Epichlorohydrin) -- Skin........................ C 2-Chtoroethanol (Ethylene chlorohydrin) -- Skin. * Chloroethylene, see Vinyl chloride............ Chloroform (Trichloromethane).... bis-Chloromethyl ether... ** 1 -Chloro-1 -nitropropane Chloropicrin................ * /3-Chloroprene -- Skin .. o-Ch lorostyrene............ o-Chlorotoluene -- Skin. 2-Chloro- 6-(trichloromethyl) pyridine (N-Serve)... Chlorpyrifos (Dursban) -- Skin... ** Chromates, certain insoluble forms........ ADOPTED VALUES TWA ppm"1 mg/m3*' 13 0.05 0.3 0.05 0.2 75 350 (0.05) 200 (0.4) 1,050 10 1,000 _ _ 45 3,500 1 0.5 28 13 5, Ala 10, Ala 10, A2 0.001 (20) 0.1 10 50 50 50, A2 Ala (100) 0.7 45 285 250 10 0.2 _ (0.05,Ala) TENTATIVE VALUES STEL ppm*11 mg/m3*' __ __ ---- _ __ _ 250 1,300 1,250 _ _ 4,375 2 1 5 19 __ 50 225 -- Ala ---- 0.3 2 ---- 75 430 75 375 20 _ 0.6 _ (Ala) Capital letters refer to Appendices. Footnotes (a thru f) see Page 32. 1980 Addition. "See Notice of Intended Changes. 13 LAM009517 Substance ADOPTED VALUES TWA ppma> mg/m3*' TENTATIVE VALUES STEL ppmal mg/m3*' ** Chromic add and Chromates, (as Cr).... -- (0.05) -- -- Chromite ore processing (chromate), as Cr...... 0.05, Ala Chromium, Sol. chromic, chromous salts (as Cr)............. Clopidol (Coyden)...... -- -- 0.5 -- 10 -- -- 20 Coal tar pitch volatiles, as benzene solubles... -- 0.2, Ala -- Ala Cobalt metal, dust and fume (as Co)............ -- (0.1) -- Copper fume................ -- 0.2 -- -- -- Dusts & Mists (as Cu) -- 1-- 2 Corundum (AI2O3)......... -- E-- E Cotton dust, raw.......... 0.2"' 0.6 Crag herbicide, see Sodium 2, 4-dichlorophenoxyethyl sulfate..................... -- 10 -- 20 Cresol, all isomers -- Skin....... 5 22 -- -- Crotonaldehyde............ 2 66 18 Crufornate................. -- 5-- 20 Cumene -- Skin.......... 50 245 75 365 Cyanamide.................. -- 2-- __ Cyanides, as CN -- Skin -- 5-- -- Cyanogen .................... 10 20 -- -- ) Cyanogen chloride........ 0.3 0.6 -- -- Cyclohexane........ ....... 300 1,050 375 1,300 Cydohexanol............... 50 200 -- -- ' Cyclohexanone............. (50) (200) -- -- Cyclohexene................ 300 1,015 -- -- Cyclohexylamine -- Skin 10 40 -- -- Cyclonite -- Skin......... -- 1.5 -- 3 Cyclopen tadiene............ 75 200 150 400 2, 4-D (2, 4-Dichlorophenoxy-acetic acid)....................... -- 10 -- 20 DDT (Dichlorodiphenyl- trichloroethane)........ -- 1-- 3 Capital letters refer to Appendices. *1980 Addition. * *See Notice of Intended Changes, k) See p. 35. 14 Substance ADOPTED VALUES TWA ppnr' mg/m3*' TENTATIVE VALUES STEL ppm"' mg/m3*' DDVP, see Dichlorvos -- Skin........................ Decaborane -- Skin...... Demeton-- Skin....... Diacetone alcohol (4-hydroxy-4-methyl- 2-pentanone)........... 1,2-Diaminoethane, see Ethylenediamine........ Diazinon -- Skin.......... Diazomethane.............. Diborane ..................... ** 1,2-Dibromomethane, see Ethylene dibromide -- Skin..... Dibrom..................... 2-n-Dibutylaminoethanol -- Skin.................... Dibutyl phosphate........ Dibutyl phthalate.......... C Dichloracetylene.......... C o-Dichlorobenzene........ p-Dichlorobenzene........ 3,3'-Dichlorobenzidene -- Skin................... Dichlorodifluoromethane. 1,3-Dichloro-5, 5-dimethyl hydantoin.. 1,1 -Dichloroethane...... * 1, 2-Dichloroethane, see Ethylene dichloride .... 1, 2-Dichloroethylene.... Dichloroethyl ether -- Skin........................ * Dichlorofluoromethane... "* Dichloromethane, see Methylene chloride .... C 1, l-Dichloro-1- nitroethane............... 1, 2-Dichloropropane, see Propylene 0.1 0.05 0.01 50 10 -- 0.2 0.1 (Alb) -- 2 1 -- 0.1 50 75 -- 1,000 -- 200 10 200 5 10 (200) 10 1 0.3 0.3 0.15 0.1 0.03 240 75 25 -- 0.1 -- 0.4 -- 0.1 (Alb) 3 14 5 5 0.4 300 450 -- -- 4 2 -- -- -- 110 A2 -- 4,950 1,250 0.2 -- 810 250 40 15 790 250 30 10 40 -- (700) (250) 60 -- 3 0.9 0.3 360 --* 0.3 -- -- 6 28 10 10 -- -- 675 A2 6,200 0.4 1,010 60 1,000 60 -- (870) -- Capital letters refer to Appendices. Footnotes (a thru f) see Page 32. "1980 Addition. "See Notice of Interned Changes. 15 SC 008308 LAM009518 Substance ADOPTED VALUES TWA ppm1" mg/m3*" TENTATIVE VALUES STEL ppm" mg/m3*1 dichloride................ * Dichloropropene -- Skin * 2, 2-Dichloropropionic add........................ Dichlorotetratluoroethane................... Dichlorvos (DDVP) -- Skin.................... Dicrotophos (Bidrin*) -- Skin........................ Dicyclopentadiene........ Dicyclopentadienyl iron .. Dieldrin -- Skin........... * Diethylamine................ Diethylaminoethanol -- Skin........................ Diethylene triamine -- Skin........................ Diethyl ether, see Ethyl ether....................... Diethyl phthalate.......... Difluorodibromomethane. "C Diglycidyl ether (D6E).... Dihydroxybenzene, see Hydroquinone.......... Diisobutyl ketone......... Diisopropylamine -- Skin........................ Dimethoxymethane, see Methylal.................. Dimethyl acetamide -- ' Skin........................ Dimethylamine............. Dimethylaminobenzene, see Xylidene -- Skin .. Dimethylaniline (N, N-Dimethylaniline) -- Skin........................ Dimethylbenzene, see Xylene -- Skin......... Dimethyl carbamyl chloride.................. Capital letters refer to Appendices. *1980 Addition. "See Notice of Intended Changes. 75 1 1 1,000 0.1 -- 5 -- -- 3 10 1 400 -- 100 (0.5) -- 25 5 1,000 10 10 5 5 100 A2 350 110 5 10 6-- 7,000 1,250 1 0.3 0.25 -- 30 -- 10 -- 0.25 -- 15 -- 50 -- 4-- 1,200 5 860 (3) 2 150 500 -- 150 -- -- -- 20 -- 3,100 1,250 35 15 18 -- 25 10 25 10 435 150 A2 510 50 -- 8,750 3 -- -- 20 0.75 -- -- . -1,500 10 1,290 -- 4 -- -- 3,875 50 -- 50 50 650 16 ADOPTED VALUES TWA Substanceppm' mg/m1^ TENTATIVE VALUES STEL ppm"1 mg/m3*1 Dimethyl-1, 2-dibromo-2-dichloroethyl phosphate, see Dibrom................... -- Dimethylformamide -- Skin........................ 10 2, 6-Dimethyl-4-heptanone, see Diisobutyl ketone.. 25 1,1-Dimethylhydrazine -- Skin.................... 0.5 Dimethylphthalate......... -- Dimethyl sulfate -- Skin . 0.1, A2 Dinitrobenzene (all isomers) -- Skin....... 0.15 Dinitro-o-cresol -- Skin . -- 3, 5-Dinitro-o-toluamide (Zoalene)............... -- Dinitrotoluene -- Skin ... -- ** Dioxane, tech, grade -- Skin........................ (50) Dioxathion (Delnav) -- Skin........................ -- Diphenyl, see Biphenyl... 0.2 Diphenylamine............. C Diphenylmethane diisocyanate, see Methylene bisphenyl isocyanate (MDI)....... 0.02 Dipropylene glycol methyl ether -- Skin .. 100 Diquat........................ Di-sec, octyl phthalate (Di-2-ethylhexyl- phthalate)................ Disulfiram................... -- -- Disulfoton (Oisyston)... -- 2, 6-Ditert. butyl-p-cresol.......... -- Diuron........................ -- * Divinyl benzene........... 10 Dyfonate -- Skin.......... -- Emery........................ Capital letters refer to Appendices. *1980 Addition. "See Notice of Intended Changes. 3 30 150 1 5 0.5, A2 1 0.2 5 1.5 (180) 0.2 1.5 10 0.2 600 0.5 5 2 0.1 10 10 50 0.1 E -- 20 1 -- 0.5 -- -- 0.6 150 -- -- -- -- -- -- -- 6 60 2 10 --'" 3 0.6 10 5 -- 4 20 900 1 10 5 0.3 20 -- -- -- 20 17 008309 LAM009519 SC 008310 Substance Endosulfan (Thiodan) -- Skin.................... Endrin -- Skin............. * Epichlorohydrin -- Skin . EPN -- Skin................ 1, 2-Epoxypropane, see Propylene oxide........ 2, 3-Epoxy-1-propanol, see Glycidol.............. Ethane........................ Ethanethiol, see Ethyl mercaptan............... Ethanolamine............... Ethion (Nialate) -- Skin '* 2-Ethoxyethanol -- Skin. ** 2-Ethoxyethyi acetate (Cellosolve acetate) -- Skin........................ Ethyl acetate................ '* Ethyl acrylate -- Skin .... Ethyl alcohol (Ethanol)... Ethylamine.................. Ethyl amyl ketone (5-Methyl-3heptanone)............... Ethyl benzene............... Ethyl bromide.............. Ethylbutyl ketone (3-Heptanone).......... Ethyl chloride............... Ethylene...................... C Ethylene chlorohydrin -- Skin........................ Ethylenediamine............ ** Ethylene dibromide....... * Ethylene dichloride....... Ethylene glycol, Particulate............... '* Vapor...................... **C Ethylene glycol dinitrate and/or Nitroglycerin ADOPTED VALUES TWA ppm" mg/m3 -- 0.1 -- 0.1 2 10 -- 0.5 100 240 50 150 F-- 0.5 1 38 -- 0.4 (100) (370) (100) 400 (25) 1,000 10 (540) 1,400 (100) 1,900 18 25 100 200 50 1,000 F 1 10 (Alb) 10 -- (100) 130 435 890 230 2,600 -- 3 25 (Alb) 40 10 (250) TENTATIVE VALUES STEL ppm01 mg/m3 81 -- -- 5 -- 150 75 F 2 6 -- (150) 0.3 0.3 20 2 360 225 -- 3 15 -- (560) (150) (810) ---- ---- ---- ---- -- 125 250 75 1,250 F -- -- -- 15 -- (125) -- 545 1,110 345 3,250 -- -- -- -- 60 20 (325) Capital letters refer to Appendices. 1980 Addition. "See Notices of Intended Changes. Footnotes (a thru f) see Page 32. 18 Substance ADOPTED VALUES TWA ppm" mg/m3 41 TENTATIVE VALUES STEL ppm" mg/m341 -- Skin.................... (0.2) Ethylene glycol methyl ether acetate (Methyl Cellosolve acetate) -- Skin.................... 25 ** Ethylene oxide.............. (50) Ethylenimine -- Skin..... 0.5 Ethyl ether.................. 400 Ethyl formate............... 100 Ethylidene chloride, see 1,1 -Dichloroethane ... 200 C Ethylidene norbomene... 5 Ethyl mercaptan............ 0.5 ** N-Ethylmorpholine -- Skin........................ 20 Ethyl silicate................ Fensulfothion (Dasanit).. Fenthion...................... Ferbam....................... Ferrovanadium dust...... Fluoride (as F).............. 10 -- __ __ __ -- Fluorine...................... 1 ** Fluorotrichloromethane, see Trichlorofluoromethane. (1,000) C Formaldehyde.............. 2 Formamide.................. 20 Formic acid................. 5 ** Furfural -- Skin............ ** Furfuryl alcohol -- Skin . ** Gasoline...................... (5) (5) Germanium tetrahydride. Glass, fibrous" or dust.. 0.2 _ *C Glutaraidehyde............. Glycerin mist............... 0.2 __ ** Glycidol (2, 3-Epoxy- 1-propanol).............. (50) Glycol monoethyl ether, see 2-Ethoxyethanol -- Skin................... 100 Graphite (Synthetic)...... -- Guthion, see (2) _ 120 (90) 1 1,200 300 810 25 1 95 85 0.1 0.1 10 1 2.5 2 35 (75) 500 150 250 -- 2 _ 30 -- _ _ _ _ 2 (5,600) (1,250) 3-- 30 30 9 (20) (15) (20) (10) (B2) 0.6 0.6 10 _ 0.7 _ E_ (150) (75) 370 150 E-- __ 170 (135) 1,500 450 1,010 _ 3 _ 255 _ 0.3 20 0.3 4 (7,000) _ 45 (60) (40) (B2) 1_.8 _ E (225) 560 -- Capital letters refer to Appendices. 1980 Addition. "See Notice of Intended Changes. 19 - - LAM009520 Sc 0a3l1 Substanceppm*1 mg/m3'" ADOPTED VALUES TWA ppm' mg/m361 TENTATIVE VALUES STEL Azinphos-methyl -- Skin........................ Gypsum...................... -- -- Hafnium...................... _ Helium........................ F Heptachlor-- Skin....... -- Heptane (n-Heptane)..... 400 Hexachlorocyclopenta- diene....................... 0.01 ' Hexachloroethane -- Skin........................ HexachloronaphthaJene -- Skin.................... (D -- Hexafluoroacetone........ 0.1 Hexane (n-hexane)........ (100) Hexamethyl phosphoramide -- Skin........................ A2 2-Hexanone, see Methyl butyl ketone -- Skin .. 25 Hexone, see Methyl isobutyl ketone) -- Skin........................ (100) sec-Hexyl acetate......... 50 Hexylene glycol............ 25 Hydrazine -- Skin........ 0.1, A2 Hydrogen .................... F Hydrogenated terphenyls 0.5 Hydrogen bromide........ 3 Hydrogen chloride........ 5 Hydrogen cyanide -- Skin........................ 10 Hydrogen fluoride (as F). 3 Hydrogen peroxide....... 1 Hydrogen selenide (as Se)......................... 0.05 Hydrogen sulfide.......... 10 Hydroquinone.............. 2-Hydroxypropyl acrylate -- -- Skin.................... Indene........................ 0.5 10 0.2 E 0_.5 0.5 1,600 0.1 (10) 0.2 0.7 (360) A2 100 (410) 300 125 0.1, A2 -- 5 10 7 10 2.5 1.5 0.2 14 2 3 45 _ _ _ F _ 500 0.03 (3) _ 0.3 (125) -- 40 (125) _ _ F -- _ -- _ 6 2 _ 15 -- _ 15 0.6 20 1.5 2 2,000 0.3 (30) 0.6 2 (450) -- 165 (510) _ _ _ _ _ -- __ 5 3 _ 21 4 _ 70 Capital letters refer to Appendices. *1980 Addition. '"See Notice of Intended Changes. 20 Substance Indium & Compounds (as In) ..................... Iodine.......................... Iodoform..................... Iron oxide fume (FezOa, as Fe)...................... Iron pentacarbonyl (as Fe).......................... Iron salts, soluble (as Fe).......................... Isoamyl acetate............ Isoamyl alcohol............ Isobutyl acetate............ Isobutyl alcohol............ Isophorone................. Isophorone diisocyanate -- Skin .. Isopropyl acetate.......... Isopropyl alcohol -- Skin Isopropylamine............. ' N-lsopropylaniline -- Skin........................ Isopropyl ether............. Isopropyl glycidyl ether OGE)....................... Kaolin......................... Ketene........................ Lead, inorg., fumes & dusts (as Pb)............ Lead arsenate (as Pb).... Lead chromate (as Cr)... Limestone.................... Lindane -- Skin........... Lithium hydride........... L.P.G. (Liquified petroleum gas)......... Magnesite................... Magnesium oxide fume (as Mg).................... Malathion -- Skin........ Maleic anhydride.......... AOOPTED VALUES TWA ppm01 mg/m34> 0.1 0.1 1 0.6 10 B3 5 (0.01) _ 100 100 150 50 5 (0.08) 1 525 360 700 150 25 0.01 0.09 250 950 400 980 5 12 2 10 250 1,050 50 240 --E 0.5 0.9 0.15 -- (0.15) -- 0.05, A2 --E -- 0.5 -- 0.025 1,000 -- _ -- 0.25 1,800 E 10 10 1 TENTATIVE VALUES STEL ppm01 mg/rn34' -- 1 _ _ 125 125 187 75 -- _ 310 500 10 5 310 75 -- 1.5 -- -- -- . --- 1,250 -- 0.3 -- 20 10 _ 2 655 450 875 225 -- 1,185 1,225 24 20 1,320 360 20 3 0.45 (0.45) -- 20 1.5 -- 2,250 20 ---- ---- Capital letters refer to Appendices. "1980 Addition. "See Notice of Intended Changes. 21 LAM009521 Substance C Manganese & Compounds (as Mn) .. Manganese fume (as Mn)........................ Manganese cyclopentadienyl tricarbonyl (as Mn) -- Skin........................ Manganese Tetroxide..... Marble/calcium carbonate................ Mercury (Alkyl compounds) -- Skin, (as Hg).................... " Mercury (All forms except alkyl), as Hg ... " Mesityl oxide............... Methane...................... Methanethiol, see Methyl mercaptan............... Methomyl (Lannate) -- Skin........................ Methoxychlor............... 2-Methoxyethanol -- Skin (Methyl Cellosolve)............. Methyl acetate.............. Methyl acetylene (propyne)................ Methyl acetylene-propadiene mixture (MAPP)........ Methyl acrylate -- Skin .. Methylacrylonitrile -- Skin........................ Methylal (dimethoxymethane) .. Methyl alcohol (methanol) -- Skin.... Methylamine................ Methyl amyl alcohol, see Methyl isobutyl carbinol -- Skin....... Capital letters refer to Appendices. "See Notice of Intended Changes. ADOPTED VALUES TWA ppm" mg/m3'" 5 _1 0.1 --1 E 0.01 _ (0.05) (25) (100) F-- 0.5 1 2.5 -- 10 25 200 1,000 80 610 1,650 1,000 10 1 1,000 200 10 1,800 35 3 3,100 260 12 25 100 TENTATIVE VALUES STEL ppm" mg/m36' _3 0.3 ---- 20 0.03 _ (0.15) -- -- .F -- _ ---- 35 250 1,250 120 760 2,040 1,250 -- 2 1,250 250 -- 2,250 -- 6 3,875 310 -- 40 160 22 Substance ADOPTED VALUES TWA ppm" mg/m36' TENTATIVE VALUES STEL ppm" mg/m3<" ** Methyl n-amyl ketone (2-Heptanone).......... (100) ** Methyl bromide -- Skin . (15) ** Methyl butyl ketone -- Skin........................ (25 Methyl Cellosolve -- Skin see 2-Methoxyethanol...... 25 Methyl Cellosolve acetate -- Skin, see Ethylene glycol monomethyl ether acetate .................... 25 ** Methyl chloride............. (100) Methyl chloroform (1,1, 1-Trichloroethane)..... 350 Methyl 2-cyanoacrylate .. 2 Methylcyclohexane....... 400 Methylcydohexanol....... 50 o-Methycyclohexanone -- Skin................... 50 Methylcyclopentadienyl manganese tricarbonyl (as MN) -- Skin....... -- Methyl demeton -- Skin. -- C Methylene bisphenyl isocyanate (MDI)....... 0.02 ** Methylene chloride (dichloromethane).... (200) 4,4'-Methylene bis (2-chloroaniline) -- Skin........................ 0.02, A2 C Methylene bis (4-cyclo- hexylisocyanate)....... 0.01 * 4, 4-Methylene dianiline . 0.1 Methyl ethyl ketone (MEK).................... 200 C Methyl ethyl ketone peroxide.................. 0.2 Methyl formate............ 100 C Methyl hydrazine -- Skin 0.2 ** Methyl iodide --Skin.... (5) (465) (60) (100) 80 120 (210) 1,900 8 1,600 235 230 0.2 0.5 0.2 (700) 0.22, A2 0.11 0.8 590 1.5 250 0.35 (28) (150) -- (40) 35 35 (125) 450 4 500 75 75 -- -- (250) -- 0.5 300 -- 150 -- (10) (710) (165) 120 170 (260) 2,450 16 2,000 350 345 0.6 1.5 (870) -- 4 885 -- 375 -- (56) Capital letters refer to Appendices. *1980 Addition. "See Notice of Intended Changes. 23 SC 008312 LAM009522 Substance " Methyl isoamyl ketone... Methyl isobutyl carbinol -- Skin.................... Methyl isobutyl ketone... Methyl isocyanate -- Skin........................ Methyl mercaptan......... Methyl methacrylate...... Methyl parathion -- Skin Methyl propyl ketone..... "C Methyl silicate.............. "C a-Methyl styrene.......... Molybdenum (as Mo) Soluble compounds... Insoluble compounds . Monocrotophos (Azodrin)............... " Monomethyl aniline -- Skin........................ Morpholine -- Skin....... Naphthalene................ /3-Naphthylamine......... Neon........................... Nickel carbonyl (as Ni)... Nickel metal................ Nickel, soluble compounds (as Ni).... Nickel sulfide roasting, fume & dust (as Ni)... Nicotine -- Skin.......... Nitric acid.................... Nitric oxide................. p-Nitroaniline -- Skin.... Nitrobenzene -- Skin..... p-Nitrochlorobenzene -- Skin........................ 4-Nitrodiphenyl............. Nitroethane................. **C Nitrogen dioxide........... Nitrogen trifluoride....... "C Nitroglycerin -- Skin..... ADOPTED VALUES TWA ppm"' mg/m3*1 (100) (475) TENTATIVE VALUES STEL ppm"' mg/m3<" (150) (710) 25 100 40 165 100 410 125 510 0.02 0.5 100 -- 200 (5) (100) 0.05 1 410 0.2 700 (30) (480) -- -- 125 -- 250 -- -- -- -- 510 0.6 875 -- -- -- 5-- 10 -- 10 -- 20 -- 0.25 -- -- (2) 0) (4) (18) 20 70 30 105 10 50 15 75 -- Alb -- Alb F --F -- 0.05 0.35 -- -- 1-- -- -- -- 0.1 -- 0.3 -- 1, Ala -- 0.5 25 25 30 16 15 --1 -- Alb 100 310 (5) (9) 10 30 (0.2) (2) -- -- 4 35 2 2 -- -- 150 -- 15 -- -- 1.5 10 45 12 10 2 Alb 465 -- 45 -- Capital letters refer to Appendices. Footnotes (a thru f) see Page 32. ' 1980 Addition. ' `See Notice of Intended Changes. 24 f Substance ADOPTED VALUES TWA ppm"' mg/m3 ' TENTATIVE VALUES STEL ppm01 mg/m3 Nitromethane............... ** 1-Nitropropane............ *C 2-Nitropropane............ N-Nitrosodimethylamine (dimethylnitrosoamine) -- Skin................... ** Nitrotoluene -- Skin...... Nitrotrichloromethane, see Chloropicrin........ Nonane....................... Octachloronaphthalene -- Skin................... Octane........................ Oil mist, mineral.......... Osmium tetraxide (as Os)......................... Oxalic act'd.................. Oxygen difluoride......... Ozone......................... Paraffin wax fume........ Paraquat, respirable sizes....................... Parathion -- Skin......... Particulate polycyclic aromatic hydro-carbons (PPAH), see Coal tar pitch volatiles........... Pentaborane................ Pentachloronaphthalene . Pentachlorophenol -- Skin........................ Pentaerythritol.............. Pentane ...................... 2-Pentanone, see Methyl propyl ketone........... " Perchloroethylene -- Skin........................ Perchloromethyl mercaptan............... 100 (25) 25, A2 -- (5) 0.1 200 -- 300 -- 0.0002 -- 0.05 0.1 -- -- -- -- 0.005 -- -- -- 600 200 (100) 0.1 250 (90) 90, A2 150 (35) -- A2 -- (30) (10) 0.7 1,050 0.3 250 0.1 1,450 5> -- 375 -- 0.002 1 0.1 0.2 2 0.0006 -- 0.15 0.3 -- 0.1 -- 0.1 -- 0.2, Ala -- 0.01 0.015 0.5 -- 0.5 E 1,800 -- -- 750 700 250 (670) (150) 0.8 -- 375 (135) A2 (60) 2 1,300 0.3 1,800 10 0.006 2 0.3 0.6 6 -- 0.3 Ala 0.03 2 1.5 20 2,250 875 (1,000) -- i I { j | j i i j ; ! 'I i | i 1 ! Capital letters refer to Appendices. Footnotes (a thru f) see Page 32. `1980 Addition. "See Notice of Intended Changes. 25 sc 008313 LAM009523 Substance Perchloryl fluoride........ Phenol -- Skin............. Phenothiazine -- Skin.... * N-Phenyl-beta- naphthylamine........... p-Phenylene diamine -- Skin........................ Phenyl ether (vapor)...... ** Phenyl ether-Diphenyl mixture (vapor)........ Phenylethylene, see Styrene, monomer..... ** Phenyl glycidyl ether (PGE)...................... Phenylhydrazine -- Skin. Phenyl mercaptan......... C Phenylphospliine.......... Phorate (Thimet) -- Skin........................ Phosdrin (Mevinphos) -- Skin.................... Phosgene (carbonyl chloride)................. Phosphine.................. Phosphoric acid............ Phosphorus (yellow)..... * Phosphorus pentachloride............ Phosphorus pentasulfide ** Phosphorus trichloride... Phthalic anhydride........ m-Phthalodinitrile......... Pidoram (Tordon)...... Picric add -- Skin........ Pival (2-Pivalyl-1,3- indandione).............. Plaster of Paris............. Platinum (Soluble salts) as Pt....................... Polychlorobiphenyls, see Chlorodiphenyls -- Skin........................ Capital letters refer to Appendices. '1980 Addition. '"See Notice of Intended Changes. ADOPTED VALUES TWA ppm0' mg/m3"' 3 14 5 19 --5 A2 A2 _ 0.1 17 (D (7) 100 420 (10) (60) 5 20 0.5 2 0.05 0.25 -- 0.05 0.01 0.1 0.1 0.4 0.3 0.4 --1 -- 0.1 0.1 1 --1 (0.5) (3) 16 _5 -- 10 -- 0.1 -- 0.1 --E 0.002 TENTATIVE VALUES STEL ppma) mg/m3'" 6 28 10 38 -- 10 ---- __ 2 14 (2) (14) 125 525 (15) (90) 10 45 __ ---- -- ' 0.2 0.03 0.3 __ 11 --3 -- 0.3 --_ --3 ---- 4 24 __ _ 20 -- 0.3 -- 0.3 -- 20 26 Substance ADOPTED VALUES TWA ppm01 mg/m36' TENTATIVE VALUES STEL ppm0' mg/m3i" Polytetrafluo roethylene decomposition products................. C Potassium hydroxide..... Propane ...................... Propargyl alcohol -- Skin........................ " /3-Propiolactone........... * Propionic acid.............. n-Propyl acetate........... Propyl alcohol -- Skin ... n-Propyl nitrate........... Propylene................... Propylene dichloride (1, 2-Dichloropropane).... "C Propylene glycol dinitrate -- Skin................... Propylene glycol monomethyl ether.... ** Propylene imine -- Skin. ** Propylene oxide........... Propyne, see Methyl acetylene................. Pyrethrurn.................. Pyridine...................... Quinone...................... RDX, see Cyclonite -- Skin........................ Resorcinol.................. ** Rhodium, Metal fume and dusts (as Rh)...... Soluble salts (as Rh).. Ronnel........................ Rosin core solder pyrolysis products (as formaldehyde).......... Rotenone (commercial).. Rouge ........................ Rubber solvent (Naphtha)................ Selenium compounds (as Se)......................... Capital letters refer to Appendices. '1980 Addition. "See Notice of Intended Changes. -- -- F 1 -- 10 200 200 25 F 75 (0.2) 100 (2) (100) 1,000 -- 5 0.1 -- 10 -- -- -- -- -- 400 B1 -- 2-- --F 23 (A2) -- 30 15 840 250 500 250 105 40 --F 350 110 (2) 360 150 (5) -- (240) (150) 1,650 5 15 0.4 1,250 -- 10 0.3 1.5 -- 45 20 (0.1) 0.001 10 -- -- 0.1 5 E 1,600 0.2 -- -- -- -- B1 -- -- 6 (A2) 45 1,050 625 470 -- 510 540 -- (360) 2,040 10 30 2 3 90 (0.3) 0.003 0.3 10 20 -- 27 sc 008314 LAM009524 sc 008315 Substance Selenium hexafluoride, (as Se).................... Sevin(see Carbaryl).... ** Silane (see Silicon tetrahydride)............. Silicon..................... Silicon carbide............. ** Silicon tetrahydride (Silane).................... ' Silver, metal................ ** Silver, soluble compounds, as Ag .... C Sodium azide............... * Sodium bisulfite............ Sodium 2, 3-dichloro- phenoxyethyl sulfate... Sodium fluoroacetate (1080) --Skin......... C Sodium hydroxide........ * Sodium metabisulfite..... Starch ........................ Stibine........................ ** Stoddard solvent.......... Strychnine................... '* Styrene, monomer (Phenyiethylene)....... ADOPTED VALUES TWA ppm"' mg/m3 41 0.05 -- (0.5) -- _ (0.5) -- -- 0_.1 -- -- -- _ -- 0.1 100 -- (100) 0.2 5 (0.7) E E (0.7) 0.1 (0.01) 0.3 5 10 0.05 2 5 E 0.5 (575) 0.15 (420) TENTATIVE VALUES STEL ppm"' mg/m3'" __ _ _ 10 (D (1.5) _ 20 20 (1) (1.5) _ _ _ _ _ _ _ _ 0.3 (125) (125) (0.0_3) _ 20 0.15 __ 20 1.5 (720) 0.45 (525) enzymes as 100% pure crystalline enzyme).................. Sucrose...................... ' Sulfur dioxide.....:........ Sulfur hexafluoride....... Sulfuric add................ Sulfur monochloride...... Sulfur pentafluoride...... Sulfur tetrafluoride........ Sulfuryl fluoride............ Systox, see Demeton -- Skin.................... 2, 4, 5-T..................... Capital letters refer to Appendices. `1980 Addition. * 'See Notice of Intended Changes, m) See Page 35. -- _ 0.00006"" E 25 1,000 6,000 _1 16 0.025 0.25 0.1 0.4 5 20 0.01 0.1 10 _ 5 1,2_50 3 0.075 0.3 10 0.03 _ 20 10 7,500 18 0.75 1 40 0.3 20 28 Substanceppmfll mg/m3*1 ADOPTED VALUES TWA ppm"> mg/m3 41 TENTATIVE VALUES STEL Tantalum..................... TEDP -- Skin............... Teflon decomposition products................. Tellurium & compounds (as Te)..................... Tellurium hexafluoride, as Te....................... TEPP --Skin............... 'CTerphenyls.................. 1,1,1, 2-Tetrachloro-2, 2-difluoroethane....... 1,1,2, 2-Tetrachloro-1, 2-difluoroethane....... "1,1,2, 2-Tetrachloroethane -- Skin.................... Tetrachloroethylene, see Perchloroethylene -- Skin........................ Tetrachloromethane, see Carbon tetrachloride -- Skin.................... Tetrachloronaphthalene.. Tetraethyl lead (as Pb) -- Skin.................... Tetrahydrofuran............ Tetramethyl lead (as Pb) -- Skin.................... Tetramethyl succinonitrile -- Skin . 'Tetrasodium pyrophosphate......... Tetranitromethane........ Tetryl (2, 4, 6-trinitrophenyl- methylnitramine) -- Skin........................ Thallium, soluble compounds (as Tl) -- Skin........................ -- -- __ 0.02 0.004 0.5 500 500 (5) 100 10 -- 200 0.5 1 5 0.2 B1 0.1 0.2 0.05 5 4,170 4,170 (35) 670 65 2 0.100- 590 0.150- 3 1 8 1.5 0.1 _ _ 0.01 _ 625 625 (10) 150 20 -- 250 2 _ 10 0.6 B1 0.2 _ 5,210 5,210 (70) 1,000 130 4 0.3 735 0.5 9 _ 3.0 Capital letters refer to Appendices. Footnotes (a thru I) see Page 32. "1980 Addition. "See Notice of Intended Changes. 29 LAM009525 Substance ADOPTED VALUES TWA ppmal mg/m3'" TENTATIVE VALUES STEL ppm1" mg/m3*" 4, 4'-Thiobis (6-tert. butyl-m-cresol)......... Thioglycolic acid.......... 1 Thiram...................... -- '* Tin, inorganic compounds, except SnH4 and Sn02 (as Sn) Tin, organic compounds (as Sn) -- Skin........ _ ** Tin oxide (as Sn)........... -- Titanium dioxide (as Ti).. -- Toluene (toluol) -- Skin . 100 **C Toluene-2, 4-diisocyanate (TDI)... (0.02) ** o-Toluidine.................. (5) Toxaphene, see Chlorinated camphene -- Skin.................... ** Tributyl phosphate........ -- * Trichloroacetic acid....... -- 1, 2, 4-Trichlorobenzene 5 1,1,1-Trichloroethane, see Methyl chloroform 350 1,1, 2-Trichloroethane -- Skin.................... 10 *' Trichloroethylene......... (100) ** Trichlorofluoromethane.. (1,000) Trichloromethane, see Chloroform.............. 10, A2 Trichloronaphfhalene .... -- 1, 2, 3-Trichloropropane 50 1,1, 2-Trichloro 1, 2, 2-trifluoroethane....... 1,000 Tricyclohexyltin hydroxide (Plictran).. _ Triethylamine............... 25 Trifluorobromomethane.. 1,000 Trimethyl benzene........ 25 ** Trimethyl phosphite...... (0.5) 2, 4, 6-Trinitrophenol, see Picric add -- Skin _ 10 5-- 5-- (2) 0.1 (E) E 375 (0.14) (22) - -- -- 150 __ (10) 0.5 (5) -- 1-- 40 -- 1,900 450 45 20 (535) (150) (5,600) (1,250) 50, A2 5 300 _ -- 75 7,600 5 100 6,100 125 (2.6) 0.1 1,250 __ 40 1,200 35 -- _ 20 -- 10 (4) 0.2 (20) 20 560 _ (44) 2.0 (5) -- -- 2,380 90 (800) (7,000) 10 450 9,500 10 160 7,300 170 -- 0.3 Capita) letters refer to Appendices. 'I960 Addition. "See Notice of Intended Changes. 30 Substance ADOPTED VALUES TWA ppm'" mg/mlM TENTATIVE VALUES STEL ppm*11 mg/m3' 2, 4, 6-Trinitrophenylmethyfnitramine, see Tetryl -- Skin.......... *C 2, 4, 6-Trinitrotoluene (TNT)...................... Triorthocresyl phosphate Triphenyl amine............ Triphenyl phosphate...... Tungsten & compounds, as W Soluble................ Insoluble.............. Turpentine.................. Uranium (natural) soluble & insoluble compounds, as U...... ** Vanadium (V2 Os), as V Dust....................... C Fume...................... Valeraldehyde.............. Vinyl acetate................ ** Vinyl benzene, see Styrene................... * Vinyl bromide.............. * Vinyl chloride............... ** Vinyl cyanide, see Acrylonitrile.............. Vinyl cyclohexene dioxide................... Vinylidene chloride....... * Vinyl toluene................ VM & P Naphtha.......... Warfarin...................... Welding fumes (NOC)+ .. ** Wood dust (nonallergenic)......... Xylene (0-, m-, p-isomers) -- Skin.... C m-Xylene a, a'-diamine. -- -- -- -- -- -- 100 -- -- -- 50 10 (100) 5, A2 5, Ala (Alb) 10 10 (100) 300 -- -- -- 100 -- 1.5 (0.5) 0.1 5 3 1 5 560 0.2 (0.5) (0.05) 175 30 (420) 20, A2 10, Ala (Alb) 60 40 (480) 1,350 0.1 5, B3 (5) 435 0.1 -- -- -- -- -- -- 150 -- -- -- -- 20 (125) -- -- 20 (150) 400 -- -- 150 -- 3.0 -- 0.3 -- 6 3 10 840 0.6 (15) -- -- 60 (525) -- -- 80 (720) 1,800 0.3 83 (10) 655 -- *1980 Addition "See Notice of Intended Changes. Capital letters refer to Appendices. +(N0C) not otherwise classified 31 008316 LAM009526 Substance * Xylidene -- Skin.......... Yttrium....................... Zinc chloride fume........ Zinc chromate (as Cr).... Zinc oxide fume............ Zinc stearate................ Zirconium compounds (as Zr)..................... 'See notice of intended changes ADOPTED VALUES TWA ppm01 mg/m3*" (5) (25) --1 _1 -- 0.05, A2 --5 --E 5 TENTATIVE VALUES STEL ppm"' mg/m3*' (10) (50) _ 3 2 -- -- -- 10 -- 20 10 a) Parts of vapor or gas per million parts of contami nated air by volume at 25C and 760 mm. Hg. pres sure. b) Approximate milligrams of substance per cubic meter of air. d) < 7 im in diameter. e) As sampled by method that does not collect vapor. f) For control of general room air, biologic monitoring is essential for personnel control. Radioactivity: The Committee accepts the philosophy and recommendations of the National Council on Ra diation Protection and Measurements (NCRP) for the ionizing radiation TLV. The NCRP is charted by Con gress to, in part, collect, analyze, develop and dissem inate information and recommendations about pro tection against radiation and about radiation measurements, quantities and units, including devel opment of basic concepts in these areas. NCRP Re port No. 39 (reference 1) provides basic philosophy and concepts leading to protection criteria estab lished in the same report. Other NCRP reports ad dress specific areas of radiation protection and, col lectively, provide an excellent basis for establishing a sound program for radiation control. The Committee recommends the listed references as substantative documentation of a sound basis for ionizing radiation protection. The Committee also strongly recommends that all exposures to ionizing radiations be kept low as reasonably achievable within the stated guidance. 32 References: 1. "Basic Radiation Protection Criteria," NCRP Report No. 39, issued January 15,1971. 2. Maximum Permissible Body Burdens and Maximum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure," US Department of Commerce, National Bureau of Standards Handbook 69, issued June 5, 1959, with Addendum 1 issued August 1963. Available as NCRP Report No. 22. The above documents, as well as information on nu merous other NCRP Reports addressing specific sub jects in ionizing radiation protection are available from: NCRP Publications, PO Box 30175, Washington, DC 20014. Substance SILICA, Si02 MINERAL DUSTS Crystalline Quartz TLV in mppcf"': 300'" % quartz + 10 TLV for respirable dust mg/m3: 10 mg/m3i) in % Respirable quartz + 2 TLV for "total dust," respirable and nonrespirable: 30 mg/m3 % quartz + 3 Cristobalite............Use one-half the value calculated from the count or mass formulae for quartz. Tridymite Use one-half the value calculated from formulae for quartz. Silica, fused Use quartz formulae. Tripoli Use respirable"' mass quartz for mula **Amorphous............................................ (20 mppcfa>) "See Notice of Intended Changes, g), h), i) See p. 34. n) See p. 35. 33 008317 LAM009527 sc 008318 SILICATES (< 1% quartz) 'Asbestos Amosite.................... Chrysotile................. Crocidolite................ Other forms............. Mica............................. Mineral wool fiber........ Perlite.......................... Portland Cement........... Soapstone .................... "Talc (nonasbestiform).. "Talc (fibrous), (use As bestos limit.) 0.5 fiber > 5/xm/cc, Ala 2 fibers > 5/j.m/cc, Ala 0.2 fiber > 5/j.m/cc, Ala 2 fibers > 5^m/cc, Ala 20 mppcf 10 mg/m3 30 mppcf 30 mppcf 20 mppcf (20 mppcf) COAL DUST 2 mg/m3 (respirable dust fraction < 5% quartz). If > 5% quartz, use respirable mass formula. NUISANCE PARTICULATES (see Appendix E) 30 mppcforlOrng/m3''1 of total dust < 1% quartz, or, 5 mg/m3 respirable dust. Conversion factors: mppcf x 35.3 = Million particles per cubic meter = particles per cc g) Millions of particles per cubic foot of air, based on impinger samples counted by light-field technics. h) The percentage of quartz in the formula is the amount determined from airborne samples, except in those instances in which other methods have been shown to be applicable. i) Both concentration and percent quartz for the appli cation of this limit are to be determined from the fraction passing a size-selector with the following characteristics: Aerodynamic Diameter (/*m) (unit density sphere) <2 2.5 3.5 5.0 10 *1980 Addition. "See Notice of Intended Changes. 34 % passing selector 90 75 50 25 0 j) containing < 1% quartz; if quartz content > 1%, use formulae for quartz. k) Lint-free dust as measured by the vertical-elutriator, cotton-dust sampler described in the Transactions of the National Conference on Cotton Dust, J. R. Lynch, pg. 33, May 2, 1970. l) As determined by the membrane filter method at 400-450X magnification (4 mm objective) phase con trast illumination. m) Based on "high volume" sampling. n) "Respirable" dust as defined by the British Medical Research Council Criteria (1) and as sampled by a device producing equivalent results (2). (1) Hatch, T. E. and Gross, P., Pulmonary Deposi tion and Retention of Inhaled Aerosols, p. 149. Academic Press, New York, New York, 1964. (2) Interim Guide for Respirable Mass Sampling,' AIHA Aerosol Technology Committee, AHIA J. 31: 2, 1970, p. 133. NOTICE OF INTENDED CHANGES (for 1980) These substances, with their corresponding val ues, comprise those for which either a limit has been proposed for the first time, or for which a change in the "Adopted" listing has been proposed. In both cases, the proposed limits should be considered trial limits that will remain in the listing for a period of at least two years. If, after two years no evidence comes to light that questions the appropriateness of the val ues herein, the values will be reconsidered for the "Adopted" list. Documentation is available for each of these substances. 35 LAJVJ009528 sc 008319 TWA STEL Substanceppm01 mg/m361 ppm01 mg/m3ll) Acetone...................... Acrylic acid................. + Acrylonitrile................. t Benzidine -- Skin......... Butane........................ 2-Buoxyethanol (Butyl Cellosolve) -- Skin .. sec-Butyl alcohol.......... n-Butyl glycidyl ether (BGE)...................... + Cadmium oxide production............... Carbon tetrachloride -- Skin........................ Carbonyl fluoride........... C o-Chlorobenzylidene malononitrile............ + Chloromethyl methyl ether....................... 1 -Chloro-1 -nitropropane. Chloropentafluoroethane. Chromium metal.......... Chromium (II) compounds, as Cr..... Chromium (III) compounds, as Cr..... Chromium (VI) compounds, as Cr Water soluble Cr VI compounds.............. Certain water insoluble Cr VI compounds....... t Chromyl chloride.......... Chrysene..................... Cobalt metal, dust & fume, as Co............. Cyclohexanone............. Cyclopentane............... 1, 2-Dibromoethane, see Ethylene dibromide -- Skin................. 1,1-Dichloro1 -nitroethane............ Diethylamine................ Diethyl ketone.............. Diglycidyl ether (DGE).... 750 10 2, Ala _ 800 1780 30 4.5, Ala Alb 1900 1000 _ __ _ -- 2375 _ _ _ -- 25 120 75 360 100 305 150 455 25 135 -- -- 0.05 -- -- -- 5, A2 2 0.05 A2 2 1000 -- 30, A2 20, A2 125, A2 55 15 0.4 -- -- A2 _ 10 _ . 6320 _ 0.5 -- _ _ _ -- -- 0.5 -- -- 0.5 -- 0.05 -- --` _ 0.05, Ala 0.025 0.15 A2 A2 _ _ -- _ __ -- _ 0.05 _ 0.1 25 100 100 400 600 1720 900 2580 A2 A2 -- 2 10 10 10 30 25 200 705 _ 0.1 0.5 -- -- 60 75 _ -- Capital letters refer to Appendices. *1980 Revision or Addition. 36 Substance TWA STEL ppm"' mg/m3<" ppm"' mg/m31" Dioxane, tech, grade -- Skin........................ 25 Dipropyl ketone........... 50 + Enfluorane.................. 75 2-Ethoxyethanol -- Skin. 50 2-Ethoxyethyl acetate (Cellosolve acetate) -- Skin.................... 50 Ethyl acrylate -- Skin .... 5 * Ethylene dibromide -- Skin........................ A2 C Ethylene glycol, vapor.... 50 Ethylene glycol dinitrate.. 0.02 Ethylene oxide.............. 10 t N-Ethylmorpholine -- Skin........................ 5 Furfural -- Skin............ 2 t Furfuryl alcohol -- Skin.. 10 t Gasoline...................... 300 Glycidol (2, 3-Epoxy- 1-propanol).............. 25 * Halothane................... 50 + Hexachlorobutadiene..... 0.02, A2 + Hexachloroethane -- Skin........................ 10 + Hexane (n-Hexane)....... 50 (other Isomers)........ 500 Hexone, see Methyl isobutyl ketone -- Skin........................ 50 + Iron pentacarbonyl, as Fe 0.1 t Isooctyl alcohol............ 50 Isopropoxyethanol........ 25 t Lead arsenate, as Pb3 (As0a)2......... .......... _ t Mercury (All forms except alkyl) -- Skin, as Hg Vapor...................... Aryl & inorganic compounds.............. __ Mesityl oxide............... 15 Methacrylic acid........... 20 + 4-Methoxyphenol......... -- Methyl n-amyl ketone (2-Heptanone).......... 50 + N-Methyl aniline -- Skin. 0.5 90 235 575 185 270 20 A2 125 0.2 20 23 8 40 900 75 400 0.24, A2 100 180 1800 205 0.8 270 105 0.15 0.05 0.1 60 70 5 235 2 100 -- -- 100 100 25 -- 0.04 -- 20 10 15 500 100 -- -- -- 1,000 75 0.2 -- 75 . _ 25 -- -- 100 1 360 -- -- 370 540 100 -- 0.4 -- 95 40 60 1500 300 -- -- -- 3,600 300 0.16 -- 320 0.45 100 -- -- 465 5 Capital letters refer to Appendices. *1980 Revision or Addition. 37 LAM009529 sc 008320 TWA Substanceppm` mg/m3*1 ppm"' mg/m36' STEL Methyl bromide -- Skin . 5 Methyl n-butyl ketone.... 5 Methyl chloride............. 50 Methylene chloride (dichloromethane)..... 100 Methyl iodide -- Skin .... 2, A2 t Methyl isoamyl ketone... 50 Methyl isobutyl ketone -- Skin.................... 50 Methyl isopropyl ketone . 200 Methyl silicate.............. 1 a-M ethyl styrene.......... t p-Nitroaniline -- Skin.... 50 -- t p-Nitrochlorobenzene -- Skin........................ 0.5 Nitrogen dioxide.......... 3 Nitroglycerin................ 0.02 1-Nitropropane............. 15 t Nitrotoiuene -- Skin...... 2 + Perchloroethylene -- Skin........................ 50 t Persulfates, alkali metal, 3S S2O8.................... -- Phenyl ether-- Diphenyl mixture (vapor)........ 0.5 t Phenyl glycidyl ether (PGE)...................... 1 t Phosphorus oxychloride. 0.1 t Phosphorus trichloride... 0.2 t Piperazine dihydrochloride........ -- Platinum metal............. -- yS-Propiolactone............ 0.5, A2 Propylene glycol dinitrate 0.02 + Propylene imine -- Skin. 2, A2 Propylene oxide............ 20 t Rhodium, Metal............ -- Insoluble compounds, as Rh...................... -- + Silicon tetrahydride (Silane).................... 5 Silver, soluble compounds, as Ag .... -- t Stoddard solvent.......... Styrene, monomer 100 (phenylethylene)....... 50 20 20 105 360 10, A2 240 205 705 6 240 3 3 6 0.2 55 11 335 2 4 6 0.6 1.5 5 1 1.5, A2 0.2 5, A2 50 1 0.1 7 0.01 525 215 15 -- 100 500 5, A2 -- 75 -- 5 100 -- -- 5 0.04 25 -- -- ` -- 2 -- 0.5 0.5 -- -- 1, A2 0.04 -- -- -- -- -- -- 200 100 60 -- 205 1,700 30, A2 -- 300 -- 30 485 -- -- 10 0.4 90 -- -- -- 16 -- 3 3 -- -- 3, A2 0.4 -- -- -- 0.3 -- -- 1,050 425 pital letters refer to Appendices. 980 Revision or Addition. 38 Substance TWA STEL ppm"' mg/m3"' ppm0' mg/m34' tl. 1, 2, 2-Tetrachloroethane -- Skin................... t Tin, tin oxide & inorganic compounds, except SnHa, as Sn.............. + o-Tolidine................... Toluene-2, 4-diisocyanate (TDI)... t o-Toluidine.................. Tributyl phosphate........ Trichloroethylene......... tC Trichlorofluoromethane.. Trimellitic anhydride...... + Trimethyl phosphite...... 12, 4, 6-Trinitrotoluene (TNT) -- Skin.......... t Vanadium, as V2O5, dust & fume................... Vinyl toluene................ Wood dust, hard wood (as in furniture making).................. tXylidine -- Skin........... 1 A2 0.005 2 0.2 50 1,000 0.005 2 _ 50 2 75 2 A2 0.04 9 2.5 270 5,600 0.04 10 0.5 0.05 240 -- 0.02 -- 0.4 150 -- -- 5 _ 100 1 10 -- 35 4 _ 0.15 -- 5 805 -- -- 25 3 485 -- NOTICE OF INTENDED CHANGES MINERAL DUSTS Substance TLV Diatomaceous earth, natural...................... Silica, amorphous......... t Talc (containing no fibers) t Talc (fiber-containing)..... 1.5 mg/m3, Respirable dust 6 mg/m3, Total dust (all sampled sizes) 3 mg/m3, Respirable dust (< 5 fim) 15 mppcf or 2 mg/m3, Respirable Dust 2 fibers/cc, > 5 /im in length Capital letters refer to Appendices. +1980 Revision or Addition. 39 LAM009530 APPENDIX A CARCINOGENS The Committee lists below those substances in in dustrial use that have proven carcinogenic in man, or have induced cancer in animals under appropriate ex perimental conditions. Present listing of those sub stances carcinogenic for man takes two forms: Those for which a TLV has been assigned (la) and those for which environmental conditions have not been suffi ciently defined to assign a TLV (1b). Ala. Human Carcinogens. Substances, or substances associated with industrial processes, recog nized to have carcinogenic or cocarcinogenic potential, with an assigned TLV: TLV + Acrylonitrile................. ++Asbestos Amosite.................... Chrysotile................. Crocidolite................ Other forms............. bis (Chloromethyl) ether Chromite ore processing (chromate)............... Nickel sulfide roasting, fume & dust............. Coal tar pitch volatiles .. tt vinyl chloride............... 2 ppm 0.5 fiber > 5^m/cc 2 fibers > 5/^m/cc 0.2 fiber > 5p.m/cc 2 fibers > 5^m/cc 0.001 ppm 0.05 mg/m3, as Cr 1.0 mg/m3, as Ni 0.2 mg/m3, as benzene solubles 5 ppm Alb. Human Carcinogens. Substances, or sub stances associated with industrial processes, recognized to have carcinogenic potential with out an assigned TLV: **. Acrylonitrile 4-Aminodiphenyl (p-Xenylamine) t Benzidine -- Skin ** Chloromethyl methyl ether ** Ethylene dibromide /3-Naphthylamine 4-Nitrodiphenyl +1980 Addition. ++1980 Adoption. "See Notice of Intended Changes. 40 For the substances in 1b, no exposure or con tact by any route-- respiratory, skin or oral, as detected by the most sensitive methods -- shall be permitted. The worker should be properly equipped to insure virtually no contact with the carcinogen. A2. Industrial Substances Suspect of Carcinogenic Potential for MAN. Chemical substances or sub stances associated with industrial processes, which are suspect of inducing cancer, based on either (1) limited epidemiologic evidence, exclu sive of clinical reports of single cases, or (2) demonstration of carcinogenesis in one or more animal species by appropriate methods. 3-Amino 1,2, 4-triazole tt Antimony trioxide production* tt Arsenic trioxide production Benzene Benzo(a)pyrene Beryllium ** Cadmium oxide production Carbon tetrachloride Chloroform + Chloromethyl methyl ether Chromates of lead and zinc, as Cr 3, 3'-Dichlorobenzidine Oimethytcarbamyl chloride 1,1-Dimethyl hydrazine Dimethyl sulfate -- Skin t Ethylene dibromide -- Skin t Hexachlorobutadiene Hexamethyl phosphoramide -- Skin Hydrazine 4, 4'-Methylene bis (2-chloroaniline) -- Skin Methyl hydrazine Methyl iodide ttc 2-Nitropropane n-Nitrosodimethylamine n-Phenyl-beta-naphthylamine 10 ppm 2.0 /ig/m3 5 ppm 10 ppm 0.05 mg/m3 0.5 ppm 0.1 ppm 0.02 ppm 0.1 ppm 0.02 ppm 0.2 ppm 2 ppm 25 ppm 'Cigarette smoking can enhance the incidence of respiratory cancers from this or others of these substances or processes. +1980 Addition. ++1980 Adoption. "See Notice of Intended Changes. 41 SC 008321 LAM009531 Propane sultone beta-Propiolactone + Propylene imine -- Skin t o-Tolidine tt Vinyl bromide Vinyl cyclohexene dioxide ----------2 ppm -----5 ppm 10 ppm For the above, worker exposure by all routes should be carefully controlled to levels consis tent with the animal and human experience data (see Documentation), including those sub stances with a listed TLV. THE COMMITTEE GUIDELINES FOR CLASSIFICATION OF EXPERIMENTAL ANIMAL CARCINOGENS The following guidelines are offered in the pres ent state of knowledge as an aid in classifying substances in the occupational environment found to be carcinogenic in experimental ani mals. A need was felt by the Threshold Limits Committee for such a classification in order to take the first step in developing an appropriate TLV for occupational exposure. Determination of Approximate Threshold of Re sponse Requirement. In order to determine in which category to classify an experimental car cinogen for the purpose of assigning an indus trial air limit (TLV), an approximate threshold of neoplastic response must be determined. Be cause of practical experimental difficulties, a precisely defined threshold cannot be attained. For the purposes of standard-setting, this is of little moment, as an appropriate risk, or safety, factor can be applied to the approximate thresh old, the magnitude of which is dependent on the degree of potency of the carcinogenic re sponse. To obtain the best 'practical' threshold of neo plastic response, dosage decrements should be less than logarithmic. This becomes particularly important at levels greater than 10 ppm (or cor responding mg/m3). Accordingly, after a range finding determination has been made by lo garithmic decreases, two additional dosage levels are required within the levels of "effect" and "no effect" to approximate the true thresh old of neoplastic response. t1980 Addition. t+1980 Adoption. 42 The second step should attempt to establish a metabolic relationship between animal and man for the particular substance found carcinogenic in animals. If the metabolic pathways are found comparable, the substance should be classed highly suspect as a carcinogen for man. If no such relation is found, the substance should re main listed as an experimental animal carcino gen until evidence to the contrary is found. Proposed Classification of Experimental Animal Carcinogens. Substances occurring in the occu pational environment found carcinogenic for animals may be grouped into three classes, those of high, intermediate and low potency. In evaluating the incidence of animal cancers, sig nificant incidence of cancer is defined as a neo plastic response which represents, in the judg ment of the Committee, a significant excess of cancers above that occurring in negative con trols. EXCEPTIONS: No substance is to be considered an occupational carcinogen of any practical sig nificance which reacts by the respiratory route at or above 1000 mg/m3 for the mouse, 2000 mg/m3 for the rat; by the dermal route, at or above 1500 mg/kg for the mouse, 3000 mg/kg for the rat; by the gastrointestinal route at or above 500 mg/kg/d for a lifetime, equivalent to about 100 g T.D. for the rat, lOg T.D. for the mouse. These dosage limitations exclude such sub stances as dioxane and trichlorethylene from consideration as carcinogens. Examples: Dioxane -- rats, hepatocellular and nasal tumors from 1015 mg/kg/d, oral Trichloroethylene -- female mice, tumors (30/98 @ 900 mg/kg/d), oral Industrial Substances of High Carcinogenic Po tency in Experimental Animals. 1. A substance to qualify as a carcinogen of high potency must fulfill one of the three fol lowing conditions in two animal species: la. Respiratory. Elicit cancer from (1) dos ages below 1 mg/m3 (or equivalent ppm) via the respiratory tract in 6- 7-hour daily 43 SC 008322 LAM009532 repeated inhalation exposures through out lifetime; or (2) from a single intratrachealiy administered dose not exceeding 1 mg of particulate, or liquid, per 100 ml or less of animal minute respiratory vol ume; Examples: bis-Chloromethyl ether, malign ant tumors, rats, @ 0.47 mg/m3 (0.1 ppm) in 2 years; Hexamethyl phosphoramide, nasal squamous cell carcino ma, rats, @ 0.05 ppm, in 13 months OR lb. Dermal. Elicit cancer within 20 weeks by skin-painting, twice weekly at 2 mg/kg body weight or less per application for a total dose equal to or less than 1.5 mg, in a biologically inert vehicle; Examples: 7, 12-Dimethylbenz(a)anthra cene -- skin tumors @ 0.120.8 mg T.D. in four weeks Benzo(a)pyrene, mice 12 ^g, 3X/wk for 18 mos. T.D. 2.6 mg, 90.9% skin tumors OR lc. Gastrointestinal. Elicit cancer by daily in take via the gastrointestinal tract, within six months, with a six-month holding period, at a dosage below 1 mg/kg body weight per day; total dose, rat, 50 mg; mouse, 3.5 mg; Examples: 7, 12-Dimethylbenz(a)anthra cene -- mammary tumors from 10 mg IX 3-Methylcholanthrene -- Tumors @ 3 sites from 8 mg in 89 weeks Benzo(a)pyrene, mice, 3.9% leukemias, from 30 mg T.D. 198 days 2. Elicit cancer by all three routes in at least two animal species at dose levels prescribed for high or intermediate potency. 44 008323 Industrial Substances of Intermediate Carcinogenic Potency in Experimental Animals. To qualify as a carcinogen of intermediate po tency, a substance should elicit cancer in two animal species at dosages intermediate be tween those described in A3a and A3c by two routes of administration. Example: Carbamic acid ethyl ester Dermal, mammary tumors, mice, 100%, 63 weeks, 500-1400 mg T.D. Gastrointestinal, various type tumors, mice 42 weeks, 320 mg T.D. Gastrointestinal, various type tumors, rats, 60 weeks, 110-930 mg T.D. Industrial Substances of Low Carcinogenic Potency in Experimental Animals. To qualify as a carcinogen of low potency, a substance should elicit cancer in one animal species by any one of three routes of adminis tration at the following prescribed dosages and conditions: la. Respiratory. Elicit cancer from (1) dosages greater than 10 mg/m3 (or equivalent ppm) via the respiratory tract in 6- 7-hour, daily repeated inhalation exposures, for 12 months' exposure and 12 months' observa tion period; or (2) from intratracheally ad ministered dosages totaling more than 10 mg of particulate or liquid per 100 ml or more of animal minute respiratory volume; Examples: Beryl (beryllium aluminum silicate) malig. lung tumors, rats, @ 15 mg/m3 @17 months Benzidine, var. tumors, rats, 10-20 mg/m3 @ > 13 mos. OR lb.Dermal. Elicit cancer by skin-painting of mice in twice weekly dosages of > 10 mg/kg body weight in a biologically inert vehicle for at least 75 weeks, i.e., 2 1.5g T.D. Examples: Shale tar, mouse, 0.1 ml x 50 = 5g T.D. 59/60 skin tumors Arsenic trioxide, man, dose un known, but estimated to be high 45 LAM009533 1c. Gastrointestinal. Elicit cancer from daily oral dosages of 50 mg/kg/day or greater during the lifetime of the animal. APPENDIX B SUBSTANCES OF VARIABLE COMPOSITION B1 Polytetrafluoroethylene* decomposition products. Thermal decomposition of the fluorocarbon chain in air leads to the formation of oxidized products containing carbon, fluorine and oxygen. Because these products decompose in part by hydrolysis in alkaline solution, they can be quantitatively de termined in air as fluoride to provide an index of exposure. No TLV is recommended pending de termination of the toxicity of the products, but air concentrations should be minimal. B2 Gasoline. See Notice of Intended Change. B3 Welding Fumes --Total Particulate (NOC)" TLV, 5mglm3 Welding fumes cannot be classified simply. The composition and quantity of both are dependent on the alloy being welded and the process and elec trodes used. Reliable analysis of fumes cannot be made without considering the nature of the welding process and system being examined; reactive metals and alloys such as aluminum and titanium are arcwelded in a protective, inert atmosphere such as argon. These arcs create relatively little fume, but an intense radiation which can produce ozone. Similar processes are used to arc-weld steels, also creating a relatively low level of fumes. Ferrous alloys also are arc-welded in oxidizing environments which generate considerable fume, and can produce carbon monox ide instead of ozone. Such fumes generally are com posed of discreet particles of amorphous slags con taining iron, manganese, silicon and other metallic constituents depending on the alloy system involved. Chromium and nickel compounds are found in fumes when stainless steels are arc-welded. Some coated and flux-cored electrodes are formulated with fluorides and the fumes associated with them can contain significantly more fluorides than oxides. Be cause of the above factors, arc-welding fumes fre quently must be tested for individual constituents which are likely to be present to determine whether specific TLV's are exceeded. Conclusions based on total fume concentration are generally adequate if no toxic elements are present in welding rod, metal, or 'Trade Names: Algoflon, Ruon, Halon, Teflon, Tetran. "Not otherwise dassified (NOC). 46 metal coating and conditions are not conducive to the formation of toxic gases. Most welding, even with primitive ventilation, does not produce exposures inside the welding helmet above 5 mg/m3. That which does, should be con trolled. APPENDIX C MIXTURES C.1 THRESHOLD LIMIT VALUES FOR MIXTURES When two or more hazardous substances are pres ent, their combined effect, rather than that of either individually, should be given primary consideration. In the absence of information to the contrary, the ef fects of the different hazards should be considered as additive. That is, if the sum of the following fractions, Ci _Cz C,, Ti T* ` ` ' T, exceeds unity, then the threshold limit of the mixture should be considered as being exceeded. Ci indi cates the observed atmospheric concentration, and Ti the corresponding threshold limit (See Example 1A.a. and 1A.c.). Exceptions to the above rule may be made when there is a good reason to believe that the chief effects of the different harmful substances are not in fact ad ditive, but independent as when purely local effects on different organs of the body are produced by the various components of the mixture. In such cases the threshold limit ordinarily is exceeded only when at least one member of the senes I/--Ci + or + c2 etc.\I itself has a value exceeding unity (See Example 1A.c.). Synergistic action or potentiation may occur with some combinations of atmospheric contaminants. Such cases at present must be determined individual ly. Potentiating or synergistic agents are not neces sarily harmful by themselves. Potentiating effects of exposure to such agents by routes other than that of inhalation is also possible, e.g. imbibed alcohol and inhaled narcotic (trichloroethylene). Potentiation is characteristically exhibited at high concentrations, less probably at low. When a given operation or process characteristi cally emits a number of harmful dusts, fumes, vapors or gases, it will frequently be only feasible to attempt to evaluate the hazard by measurement of a single substance. In such cases, the threshold limit used for 47 008324 LAM009534 sc 008325 this substance should be reduced by a suitable factor, the magnitude of which will depend on the number, toxicity and relative quantity of the other contamin ants ordinarily present. Examples of processes which are typically asso ciated with two or more harmful atmospheric conta minants are welding, automobile repair, blasting, painting, lacquering, certain foundry operations, die sel exhausts, etc. CAA Examples of THRESHOLD UMfT VALUES FOR MIXTURES The following formulae apply only when the com ponents in a mixture have similar toxicologic effects; they should not be used for mixtures with widely dif fering reactivities, e.g. hydrogen cyanide & sulfur dioxide. In such case the formula for Independent Ef fects (1A.c.) should be used. lA.a. General case, where air is analyzed for each component; a. Additive effects. (Note: It is essential that the atmosphere be analyzed both qualitatively and quantitatively for each component pres ent, in order to evaluate compliance or noncompliance with this calculated TLV.) + Ti C_3 +... =1 t3 Example No. lA.a.: Air contains 400 ppm of acetone (TLV = 1000 ppm) 150 ppm of secbutyl acetate (TLV = 200 ppm) and 100 ppm of 2-butanone (TLV . = 200 ppm) Atmospheric concentration of mix ture = 400 + 150 + 100 = 650 ppm of mixture 400 1000 150 200 = 0.4 +0.75 +0.5 =1.65 Threshold Limit is exceeded. lA.b. Special case when the source of contaminant is a liquid mixture and the atmospheric composi tion is assumed to be similar to that of the orig inal material; e.g. on a time-weighted average exposure basis, all of the liquid (solvent) mix ture eventually evaporates. 48 I Additive effects (approximate solution) 1. The percent composition (by weight) of the liquid mixture is known, the TLVs of the constituents must be listed in mg/m3. (Note: In order to evaluate compliance with this TLV, field sampling instruments should be calibrated, in the laboratory, for response to this specific quantitative and qualitative airvapor mixture, and also to fractional concen trations of this mixture: e.g., 112 the TLV; 1110 the TLV; 2 x the TLV; 10 x the TLV; etc.) TLV of mixture = TLV,, TLV 6 TLVC +. . . In TLV,, Example No. 1: Liquid contains (by weight) 50% heptane: TLV = 400 ppm or 1600 mg/m3 1 mg/m3 = 0.25 ppm 30% methyl chloroform: TLV = 350 ppm or 1900 mg/m3 1 mg/m3 = 0.28 ppm 20% perchloroethylene: TLV = 100 ppm or 670 mg/m3 1 mg/m3 = 0.15 ppm TLV of Mixture = 0.5 1 0.3 1600 + 1900 02 670 1 0.00031 +0.00016 +0.00030 1 = 1300 mg/m3 0.00077 of this mixture 50% or (1300) (0.5) = 650 mg/m3 is heptane 30% or (1300) (0.3) = 390 mg/m3 is methyl chloro form 20% or (1300) (0.2) = 260 mg/m3 is perchloroethylene These values can be converted to ppm as follows: heptane: 650 mg/m3 x 0.25 = 162 ppm 49 LAM009535 methyl chloroform: 390 mg/m3 x 0.18 = 70 ppm perchloroethylene: 260 mg/m3 x 0.15 = 39 ppm TLV of mixture = 162 + 70 + 39 = 271 ppm, or 1300 mg/m3 lA.c. Independent effects. Air contains 0.15 mg/m3 of lead (TLV, 0.15) and 0.7 mg/m3 of sulfuric acid (TLV, 1). Mi=i; _0JL=0.7 0.15 1 Threshold limit is not exceeded. IB. TLV for Mixtures of Mineral Dusts. For mixtures of biologically active mineral dusts the general formula for mixtures may be used. For mixture containing 80% nonasbestiform talc and 20% quartz, the TLV for 100% of the mixture is given by: TLV =-------- --------- = 9 mppcf 0.8 , 0.2 20 2.7 TLV of nonasbestiform talc (pure) = 20 mppcf TLV of quartz (pure) = 300 522 = 2.7 mppcf 100 + 10 Essentially the same result will be obtained if the limit of the more (most) toxic component is used provided the effects are additive. In the above ex ample the limit for 20% quartz is 10 mppcf. For another mixture of 25% quartz, 25% amor phous silica and 50% talc: 25% quartz -- TLV (pure) = 2.7 mppcf 25% amorphous silica -- TLV (pure) -- mppcf 50% talc TLV (pure) = 20 mppcf TLV = _________ 1 ^--8mppci 0.25 t 0.25 + 2.7 20 20 The limit for 25% quartz approximates 9 mppcf. 50 APPENDIX E Some Nuisance Particulates0' TLV, 30 mppcf or 10mg/m3 of total dust < 1% quartz, or, 5 mg/m3 respirable dust Aluminum Oxide (AI2O3) Calcium carbonate Calcium silicate Cellulose (paper fiber) Portland Cement Emery Glycerin Mist Graphite (synthetic) Gypsum Vegetable oil mists (except castor, cashew nut, or similar irritant oils) Kaolin Limestone Magnesite Marble Mineral Wool Fiber Pentaerythritol Plaster of Paris Silicon Silicon Carbide Starch Sucrose "Tin Oxide Titanium Dioxide Zinc Stearate Zinc oxide dust 0) When toxic impurities are not present, e.g. quartz < 1%. APPENDIX F Some Simple Asphyxiants'" Acetylene Argon Butane Ethane Ethylene Helium Hydrogen Methane Neon Propane Propylene p) As defined on pg. 6. APPENDIX G Conversion of mppcf to Mass Concentration Calculations for Conversion of Particle Count Con centration (by Standard Light Field -- Midget Impinger Techniques), in mppcf, to Respirable Mass Concentration (by Respirable Sampler) in mg/m3.t 1. In 1967, Jacobsen and Tomb.t derived an em pirical relationship of 5.6 mppcf to 1 milligram ^Relationship Between Gravimetric Respirable Oust Concentration and Midget Impinger Number Concentration." by Murray Jacobson and T. F. Tomb, AIHAJ, 28: Nov.-Oec. 1967. "See Notice of Intended Changes. 51 008326 LAM009536 of respirable dust per cubic meter of air, based on 23 sets of samples, mostly coal dust. The fol lowing calculation results in an equivalence of 6.37 mppcf to 1 mg/m3 of respirable dust. Thus, an approximate ratio of 6 mppcf to 1 mg/m3 of respirable dust is suggested for conversion of TLVs from a count to a mass basis when the density and mass median diameter have not been determined. 2. Basic assumptions: a) Average density for silica containing dusts = 2.5 gms/cm3 (2500 mg/cm3). Pulmonary significant dust densities may vary from 1.2 gm/cm3 for coal dust to 3.1 gms/cm3 for Portland Cement. Silica densities vary from 2.2 (amorphous) to 2.3 (cristobalite and tridymite) to 2.5 (alpha-quartz.) gms per cm3. b) The mass median diameter (mmd) of parti cles collected in midget impinger samplers and counted by the standard light field tech nique, and collected in a respirable sampler is approximately 1.5 jim or 1.5 x lO"1 cm. This assumption is, of course, quite arbitrary since the mmd of all dust clouds is'quite variable, depending on many independent parameters, such as source of dust, age of dust cloud, meteorological conditions, etc. 3. Calculation: a) vol. per particle: 4/3 v r3; r = 0.75 x 10~4 cm = 4/3 7T (0.75 x 10-4)3 = 1.77 x 10-12 cm3 b) wt. per particle = vol. x density = 1.77 x 10~12 cm3 x 2.5 x 103 mg/cm3 = 4.425 x 10-9 mg/particle c) 1 particle/ft.3 = 35.5 part./m3 (since 35.5 cu ft = 1 cu m.) 10s part./ft3 = mppcf = 35.5 x 10s part./m3 wt. of 1 mppcf = 35.5 x 106 part./m3 x 4.425 x 10-9 mg/part. 1 mppcf = 0.157 mg/m3 or 6.37 mppcf = 1 mg/m3 or approximately 6 mpccf = 1 mg/m3. 52 4. Equivalent TLVs in mppcf and mg/m3 (respir able mass) for Mineral Dusts. Substance Threshold Limit Value Count Resp. Mass Total Mass' mppcf mg/m3 mg/m3 Silica (SiCh) Amorphous Cristobalite Fused silica Quartz Tridymite Coal Dust Diatomaceous earth, natural Graphite (natural) Mica Mineral wool fiber Nuisance particulates Perlite Portland Cement Soapstone Tripoli 20 1.5 3 3 1.5 (12) -- 15 20 -- 30 30 30 20 (3) (3)** 0.05 0.1 0.1 0.05 2 1.5 (2.5) (3) (5) (5) (5) (5) (3) 0.1 (6) 0.15 0.3 0.3 0.15 (4) -- (5) (6) 10 10 (10) (10) (6) (0.3) 'Unless otherwise specified, respirable mass is presumed to equal ap proximately 50% ot total mass. ' 'All values in parentheses ( ) represent newly calculated values based on equivalence of 6 mppcf = 1 mg/m3 respirable mass and respir able mass s 50% total mass. 53 sc 008327 LAM009537 TLVs Threshold Limit Values for Physical Agents Adopted by ACGIH for 1980 Sc 003J8 LAM009538 sc 008329 1980 TLV PHYSICAL AGENTS COMMITTEE Herbert H. Jones, Central Missouri State University, Chairman Peter A. Breysse, University of Washington Thomas Cummings, Dept, of Health -- Ontario, Can ada Irving H. Davis, Dept, of Health -- Michigan LCDR Joseph J. Drozd, USN Dr. Allan P. Heins, OSHA LCDR Richard Johnson, USN Edward J. Largent, Retired John C. Mitchell, USAF Anthony M. Muc, Ph.D., Dept, of Health -- Ontario, Canada David H. Sliney, USAEHA LTC Robert T. Wangemann, USA Thomas K. Wilkinson, USPHS-NIH CONSULTANTS Gerald V. Coles Any comments or questions regarding these limits should be addressed to: Executive Secretary American Conference of Governmental Industrial Hy gienists P.O. Box 1937 Cincinnati, OH 45201: (513)661-7881 PREFACE PHYSICAL AGENTS These threshold limit values refer to levels of phys ical agents and represent conditions under which it is believed that nearly all workers may be repeatedly ex posed day after day without adverse effect. Because of wide variations in individual susceptibility, expo sure of an occasional individual at, or even below, the threshold limit may not prevent annoyance, aggrava tion of a pre-existing condition, or physiological dam age. These threshold limits are based on the best avail able information from industrial experience, from ex perimental human and animal studies, and when pos sible, from a combination of the three. These limits are intended for use in the practice of industrial hygiene and should be interpreted and ap plied only by a person trained in this discipline. They are not intended for use, or for modification for use, (1) in the evaluation or control of the levels of physi cal agents in the community, (2) as proof or disproof of an existing physical disability, or (3) for adoption by countries whose working conditions differ from those in the United States of America. These values are reviewed annually by the Com mittee on Threshold Limits for Physical Agents for re visions or additions, as further information becomes available. Notice of Intent--At the beginning of each year, proposed actions of the Committee for the forthcom ing year are issued in the form of a "Notice of Intent." This notice provides not only an opportunity for com ment, but solicits suggestions of physical agents to be added to the list. The suggestions should be ac companied by substantiating evidence. As Legislative Code --The Conference recognizes that the Threshold Limit Values may be adopted in legislative codes and regulations. If so used, the in tent of the concepts contained in the Preface should be maintained and provisions should be made to keep the list current. LAM009539 Reprint Permission --This book is fully protected by copyright and no part of it may be reproduced in any form, by print, photoprint, microfilm or any other means without written permission from the American Conference of Governmental Industrial Hygienists, Inc., P.O. Box 1937, Cincinnati, OH 45201. THRESHOLD LIMIT VALUES HEAT STRESS These Threshold Limit Values refer to heat stress conditions under which it is believed that nearly all workers may be repeatedly exposed without adverse health effects. The TLVs shown in Table 1 are based on the assumption that nearly all acclimatized, fully clothed workers with adequate water and salt intake should be able to function effectively under the given working conditions without exceeding a deep body temperature of 38C (WHO technical report series #412, 1969 Health Factors Involved in Working Under Conditions of Heat Stress', F. N. Dukes-Dobos'and A. Henschel: "Development of Permissible Heat Expo sure Limits for Occupational Work." ASHRAE Journal, Vol. 15: No. 9, September 1973, pp. 57-62.) Since measurement of deep body temperature is impractical for monitoring the workers' heat load, the measurement of environmental factors is required which most nearly correlate with deep body tempera ture and other physiological responses to heat. At the present time Wet Bulb Globe Temperature Index (WBGT) is the simplest and most suitable technique to measure the environmental factors. WBGT values are calculated by the following equations: 1. Outdoors with solar load: WBGT = 0.7WB +0.26T + 0.1 DB 2. Indoors or Outdoors with no solar load: WBGT = 0.7WB + 0.3GT where: WBGT = Wet Bulb Globe Temperature Index WB = Natural Wet-Bulb Temperature DB = Dry-Bulb Temperature GT = Globe-Thermometer Temperature The determination of WBGT requires the use of a black globe thermometer, a natural (static) wet-bulb thermometer, and a dry-bulb thermometer. 58 TABLE 1 Permissible Heat Exposure Threshold Limit Values (Values are given in "0. WBGT) Work Load Work -- Rest Regimen Light Moderate Heavy Continuous work 30.0 26.7 25.0 75% Work -- 25% Rest, Each hour 30.6 28.0 25.9 50% Work -- 50% Rest, Each hour 31.4 29.4 27.9 25% Work -- 75% Rest, Each hour 32.2 31.1 30.0 Higher heat exposures than shown in Table 1 are permissible if the workers have been undergoing medical surveillance and it has been established that they are more tolerant to work in heat than the average worker. Workers should not be permitted to continue their work when their deep body tempera ture exceeds 38.0C. EVALUATION AND CONTROL I. Measurement of the Environment The instruments required are a dry-bulb, a natural wet-bulb, a globe thermometer, and a stand. The measurement of the environmental factors shall be performed as follows: A. The range of the dry and the natural wet bulb ther mometer shall be -5C to 50C with an accuracy of 0.5C. The dry bulb thermometer must be shielded from the sun and the other radiant surfaces of the en vironment without restricting the airflow around the bulb. The wick of the natural wet-bulb thermometer shall be kept wet with distilled water for at least 1/2 hour before the temperature reading is made. It is not enough to immerse the other end of the wick into a reservoir of distilled water and wait until the whole wick becomes wet by capillarity. The wick shall be wetted by direct application of water from a syringe 59 SC 008330 LAM009540 sc 008331 1/2 hour before each reading. The wick shall extend over the bulb of the thermometer, covering the stem about one additional bulb length. The wick should always be clean and new wicks should be washed be fore using. B. A globe thermometer, consisting of a 15 cm. (6inch) diameter hollow copper sphere painted on the outside with a matte black finish or equivalent, shall be used. The bulb or sensor of a thermometer (range -5C to 100C with an accuracy of 0.5C) must be fixed in the center of the sphere. The globe thermom eter shall be exposed at least 25 minutes before it is read. C. A stand shall be used to suspend the three ther mometers so that they do not restrict free air flow around the bulbs, and the wet-bulb and globe ther mometer are not shaded. D. It is permissible to use any other type of tempera ture sensor that gives identical reading as that of a mercury thermometer under the same conditions. E. The thermometers must be so placed that the readings are representative of the condition Where the men work or rest, respectively. The methodology outlined above is more fully ex plained in the following publications: 1. "Prevention of Heat Casualties in Marine Corps Recruits, 1955-1960, with Comparative Incidence Rates and Climatic Heat Stresses in other Training Categories," by Captain David Minard, MC, USN, Re search Report No. 4, Contract No. MR005.01-0001.01, Naval Medical Research Institute, Bethesda, Mary land, 21 February 1961. 2. "Heat Casualties in the Navy and Marine Corps, 1959-1962, with Appendices on the Field Use of the Wet Bulb-Globe Temperature Index," by Captain David Minard, MC, USN, and R. L. O'Brien, HMC, USN. Research Report No. 7, Contract No. MR 005.01-0001.01, Naval Medical Research Institute, Bethesda, Maryland, 12 March 1964. 3. Minard, D.: Prevention of Heat Casualties in Marine Corps Recruits. Military Medicine 126(4): 261272, 1961. II. Work Load Categories Heat produced by the body and the environmental heat together determine the total heat load. There fore, if work is to be performed under hot environ mental conditions, the workload category of each job 60 shall be established and the heat exposure limit perti nent to the work load evaluated against the applica ble standard in order to protect the worker from ex posure beyond the permissible limit. A. The work load category may be established by ranking each job into light, medium, and heavy cate gories on the basis of type of operation. Where the work load is ranked into one of said three categories, i.e. (1) light work (up to 200 kcal/hr or 800 Btu/hr): e.g., sitting or standing to control machines, perform ing light hand or arm work, (2) moderate work (200-350 kcal/hr or 800-1400 Btu/hr): e.g., walking about with moderate lifting and pushing, (3) heavy work (350-500 kcal/hr or 1400-2000 Btu/hr): e.g., pick and shovel work, the permissible heat exposure limit for that work load shall be determined from Table 1. B. The ranking of the job may be performed either by measuring the worker's metabolic rate while perform ing his job or by estimating his metabolic rate by the use of the scheme shown in Table 2. Tables available in the literature listed below and in other publications as well may also be utilized. When this method is used the permissible heat exposure limit can be de termined by Figure 1. 1. Per-Olof Astrand and Kaare Rodahl: "Textbook of Work Physiology" McGraw-Hill Book Company, New York, San Francisco, 1970. 2. "Ergonomics Guide to Assessment of Metabolic and Cardiac Costs of Physical Work." Amer. Ind. Hyg. Assoc. J. 32; 560,1971. 3. Energy Requirements for Physical Work. Purdue Farm Cardiac Project. Agricultural Experiment Sta tion. Research Progress Report No. 30,1961. 4. J. V. G. A. Dumin and R. Passmore: "Energy, Work and Leisure." Heinemann Educational Books, Ltd., London, 1967. 61 LAM009541 TABLE 2 Assessment of Work Load Average values of metabolic rate during different ac tivities. Body position and movement Sitting Standing Walking Walking up hill kcal/min 0.3 0.6 2.0-3.0 add 0.8 per meter (yard) rise B. Type of Work Average Range kcal/min kcal/min Hand work light 0.4 .0.2-1.2 heavy 0.9 Work with one arm light 1.0 0.7-2.5 heavy 1.8 Work with both arms light heavy 1.5 2.5 1.0-3.5 Work with body light moderate heavy very heavy 3.5 5.0 7.0 9.0 2.515.0 Light hand work: writing, hand knitting Heavy hand work: typewriting Heavy work with one arm: hammering in nails (shoe maker, upholsterer) Light work with two arms: filing metal, planing wood, raking of a garden Moderate work with the body: cleaning a floor, beat ing a carpet 62 Heavy work with the body: railroad track laying, dig ging, barking trees Sample Calculation: Using a heavy hand tool on an assembly line A. Walking along 2.0 kcal/min B. Intermediate value between heavy work with two arms and light work with the body 3.0 kcal/min C. Add for basal metabolism 5.0 kcal/min 1.0 kcal/min Total 6.0 kcal/min Adapted from Lehmann, G. E., A. Muller and H. Spitzer: Der Kalorienbedarf bei gewerblicher Arbeit. ArbeitsphySiol. 14: 166, 1950. III. Work-Rest Regimen The permissible exposure limits specified in Table 1 and Figure 1 are based on the assumption that the WBGT value of the resting place is the same or very close to that of the work place. Where the WBGT of the work area is different from that of the rest area a time-weighted average value should be used for both environmental and metabolic heat. When timeweighted average values are used the appropriate curve on Figure 1 is the solid line labeled "continu ous." The time-weighted average metabolic rate (M) shall be determined by the equation: Av. M = (Mi) x (ti) + (M2) x (t2) + ... + (M,,) x (t,,) (ti) + (ta) + .... + (t,,) Where Mi M2, M,, are estimated or measured metabo lic rates for the various activities of the worker during the total time period, ti, t2, t,, are the elapsed times in minutes spent at the corresponding metabolic rate as determined by a time study. The time-weighted average WBGT shall be deter mined by the equation: Av. WBGT = (WBGTi) x (ti) + (WBGTz) x t2 + ... + (WBGT,,) x (t,,) (ti) + (tz) + . . . + (t,,) 63 sc 008332 LAM009542 where WBGTi, WBGT2, WBGT,, are calculated values of WBGT for the various work and rest areas occu pied during total time periods, ti, fc, t,, are the elapsed times in minutes spent in the corresponding areas which are determined by a time study. Where expo sure to hot environmental conditions is continuous for several hours or the entire work day, the timeweighted averages shall be calculated as hourly timeweighted average i.e., ti + b + ... + t,, = 60 minutes. Where the exposure is intermittent, the time-weighted averages shall be calculated as two-hour time-weight ed averages, i.e., ti + fe + ... + t = 120 minutes. The permissible exposure limits for continuous work are applicable where there is a work-rest regi men of a 5-day work week and an 8-hour work day with a short morning and afternoon break (approxi mately 15 minutes) and a longer lunch break (approx imately 30 minutes). Higher exposure limits are per mitted if additional resting time is allowed. All breaks, including unscheduled pauses and administrative or operational waiting periods during work may be counted as rest time when additional rest allowance must be given because of high environmental temper atures. IV. Water and Salt Supplementation During the hot season or when the worker is ex posed to artificially generated heat, drinking water shall be made available to the workers in such a way that they are stimulated to frequently drink small amounts, i.e., one cup every 15-20 minutes (about 150 ml or 1/4 pint). The water shall be kept reasonably cool (10-15C or 50.0-60.0F) and shall be placed close to the workplace so that the worker can reach it without abandoning the work area. The workers should be encouraged to salt their food abundantly during the hot season and particu larly during hot spells. If the workers are unacclima tized, salted drinking water shall be made available in a concentration of 0.1% (1g NaCI to 1.0 liter or 1 level tablespoon of salt to 15 quarts of water). The added salt shall be completely dissolved before the water is distributed, and the water shall be kept reasonably cool. V. Other Considerations A. Clothing: The permissible heat exposure TLVs are valid for light summer clothing as customarily worn by workers when working under hot environmental 64 008333 conditions. If special cothing is required for perform ing a particular job and this clothing is heavier or it impedes sweat evaporation or has higher insulation value, the worker's heat tolerance is reduced, and the permissible heat exposure limits indicated in Table 1 and Figure 1 are not applicable. For each job catego ry where special clothing is required, the permissible heat exposure limit shall be established by an expert. B. Acclimatization and Fitness: Acclimatization to heat involves a series of physiological and psycholog ical adjustments that occur in an individual during his first week of exposure to hot environmental condi tions. The recommended heat stress TLVs are valid for acclimated workers who are physically fit. Extra caution must be employed when unacclimated or physically un-fit workers must be exposed to heat stress conditions. Btu/hr Rote of Work Figure 1 -- Permissible Heat Exposure Threshold Limit Value 65 LAM009543 W B G T -F 008334 IONIZING RADIATION The Committee accepts the philosophy and recom mendations of the National Council on Radiation Pro tection and Measurements (NCRP) for the ionizing ra diation TLV. The NCRP is charted by Congress to, in part, collect, analyze, develop and disseminate infor mation and recommendations about protection against radiation and about radiation measurements, quantities and units, including development of basic concepts in these areas. NCRP Report No. 39 (refer ence 1) provides basic philosophy and concepts lead ing to protection criteria established in the same re port. Other NCRP reports address specific areas of radiation protection and, collectively, provide an ex cellent basis for establishing a sound program for ra diation control. The Committee recommends the list ed references as substantative documentation of a sound basis for ionizing radiation protection. The committee also strongly recommends that all expo sures to ionizing radiations be kept as low as reason ably achievable within the stated guidance. References: 1. "Basic Radiation Protection Criteria," NCRP Re port No. 39, issued January 15,1971. 2. Maximum Permissible Body Burdens and Maxi mum Permissible Concentrations of Radionuclides in Air and in Water for Occupational Exposure," US De partment of Commerce, National Bureau of Standards Handbook 69, issued June 5, 1959, with Addendum 1 issued August 1963. Available as NCRP Report No. 22. The above documents, as well as information on nu merous other NCRP Reports addressing specific sub jects in ionizing radiation protection are available from: NCRP Publications, PO Box 30175, Washing ton, DC 20014. . USERS The threshold limit values are for exposure to laser radiation under conditions to which nearly all workers may be exposed without adverse effects. The values should be used as guides in the control of exposures and should not be regarded as fine lines between safe and dangerous levels. They are based on the best available information from experimental studies. Limiting Apertures The TLVs expressed as radiant exposure or irradiance in this section may be averaged over an aper ture of 1 mm except for TLVs for the eye in the spec tral range of 400-1400 nm, which should be averaged 66 over a 7 mm limiting aperture (pupil); and except for all TLVs for wavelengths between 0.1--1 mm where the limiting aperture is 10 mm. No modification of the TLVs is permitted for pupil sizes less than 7 mm. The TLVs for "extended sources" apply to sources which subtend an angle greater than a (Table 5) which varies with exposure time. This angle is not the beam divergence of the source. Correction Factors A and B (CA and CB) The TLVs for ocular exposure in Tables 3 and 4 are to be used as given for all wavelength ranges. The TLVs for wavelengths between 700 nm and 1049 nm are to be increased by a uniformly extrapolated factor (CJ as shown in Figure 2. Between 1049 nm and 1400 nm, the TLV has been increased by a factor (Q<) of five. For certain exposure times at wavelengths be tween 550 nm and 700 nm, correction factor (Cfl) must be applied. The TLVs for skin exposure are given in Table 6. The TLVs are to be increased by a factor {CA) as shown in Figure 2 for wavelengths between 700 nm and 1400 nm. To aid in the determination of TLVs for exposure durations requiring calculations of fraction al powers Figures 3, 4, 5 and 6 may be used. Repetitively Pulsed Lasers Since there are few experimental data for multiple pulses, caution must be used in the evaluation of such exposures. The protection standards for irradiance or radiant exposure in multiple pulse trains have the following limitations: (1) The exposure from any single pulse in the train is limited to the protection standard for a single com parable pulse. (2) The average irradiance for a group of pulses is limited to the protection standard as given in Tables 3, 4, or 6 of a single pulse of the same duration as the entire pulse group. (3) When the Instantaneous Pulse Repetition Fre quency (PRF) of any pulses within a train exceeds one, the protection standard applicable to each pulse is reduced as shown in Figure 6 for pulse durations less than 10-5 second. For pulses of greater duration, the following formula should be followed: 67 LAM009544 Standard (s'ngle P11136^ = Standard (pulse nr) \in train / p where: n = number of pulses in train t - duration of a single pulse in the train Standard (nr) = protection standard of one pulse having a duration equal to nr sec onds. E o Correction Factor A (Qi) EXPOSURE DURATION t SI Wavelength (nm) Figure 2 -- TLV correction factor for X = 700 - 1400 nm* *For X = 700 - 1049 nm, C, = 1010-u' - TM> For X = 1050 - 1400 nm, C,, = 5 68 (Z.uot) 3ansodx3 iNviava ah o > 1 nCB 2 69 SC 008335 LAM009545 sc 008336 LAM00&546 EXPOSURE DURATION < j) 72 SC 008337 73 LAM009547 EXPOSURE OURATION IS> sc 008338 o PULSE REPETITION FREQUENCY. PRF (Mi) > Figure 6 -- Multiplicative correction factor for repetitively pulsed lasers having pulse durations less than 10-' second. TLV for a single pulse of the pulse train is multiplied by the above correction factor. Correction factor for PRF greater than 1000 Hz is 0.06. 74 75 LAM009548 03 CO Oo o oo U49QX/J5. Cr^c0O--o3 5 CO as =o <co2 o-- --031 .o4E3 ^cEo 03 II ^O03 **c5> 1* 5> LE3oQXU .c80n3- K E EE <0o3 Eo . . . -o E ocomoco0oo0m0o*0c0o CO CO -O' CO CM CO -- ^ cvj v <d X CO EE O C\J GO O CM CO OO EecEeEcEc^cEcEcE__c_E_c_E_c__E_c_E_c__E: e ^ OOrt'C'?CONCOO)01"C\JfO` OCOOOOOOOOt-- *-- T-- T-- < CM CM CO CO CO CO CO CO CO CO CO CO CO i O CD >=D =>3 76 Eo Eo W ' "9 Eo E * F!C1 OE*I E n6 "rt?l;;5:sP 7la>? p6 .:el7r:E Eu :cis sw w< CinO O ,_: o ' ixn * o ^ ajQJ ~ i^CM i-^-om^wojnr- oo oo oy-- oy~~ O OT" ox2 x5. -,- <n 0 I 0 0X00 00 02" or2-ro r osr x _ co` T-^ 2 O vxSroro2COO o . X CO w O O o o 00 O o *lo o OO o* oI on Ol oL o Ec : o oo* o oor_eeo-_. _opEoe__O*t_oeco*)r_oorec-__oO_PEo__oOhPEo_-o0*O(1Ec)O0O,icr"=^)-oT0io- ie _ go 1 = o* o T- ^ O O'1""1"* *- o Ee in : eeeeeeee! i E E OOrr oOO' (< i o m o o o o o of'*** oin o-- omoT- ohco- --f-.. : o 0 < < GQ > GC cr CM If cl-< Se cI/3'I"I,,Ic -|'| wo c * -in O O r- h- \r> 77 Sc 008339 LAM009549 sc 008340 to o 55 Q a? n^ fi .>5 ^Sx C<D _ e O CO C/3 O =R3 ECO >s E --; CO , oo <o J=Ort-l P I _T-_. . T-- --- O_ ' CO C\J CO CSJ CM -- c*)OW o XO coo C,_/3 . 2o 'OjocOq-- O co CO a p p n --o*-- ai-s _O ^ ( ~ o 00*^00000 eeeeeeIII c = = c= = c0o<=>e OOOOO^^^OOOOOTJO-OTfO^ P*- ^h*tOls*NNT-r*T"r* oooooooooo eccecececececececee3. Ooc\joO^roOTTmO^cmOoO,,5o'rOo^-rOos^pOr^--T~. Jj s ct/aJ "VO O ofi < CC 78 ! GoO "5 03 ^ o CO E e o..^.....r*..-..i.n.......c..m...t.o.......c..m1/,3_____^ ^_^_____T_T_ eo In C3W 1- CM{*5lOC3 r- CM CM CM CM 03 CD < in 03 03 x.E C<D 03 < ^ T3 O) 03 C CO OOOOOOOOO o o o o 0 1 79 LAM009550 g" CO * C*3 >| " ft co CO X 03 E* o_Tl ! . I 03 E C/3 CXI CO o CSQ- ^-- con C_O r** rr\ ~ooo Ec ^ co ii o o . oT E E TJ* T- O EE E i CVJ -- o *> 03 ~> io=> < m' ro Lj EE -- 80 MICROWAVES These Threshold Limit Values refer to microwave energy in the frequency range of 300 MHz to 300 GHz and represent conditions under which it is believed that nearly all workers may be repeatedly exposed without adverse effect. Under conditions of moderate to severe heat stress, the recommended values may need to be re duced.* Therefore, these values should be used as guides in the control of exposure to microwave en ergy and should not be regarded as a fine line be tween safe and dangerous levels. Recommended Values: The Threshold Limit Value for occupational expo sure to microwave energy, where power density or field intensity is known and exposure time is con trolled, Is as follows: 1. For exposure to continuous wave (CW) sources, the power density level shall not exceed 10 mil liwatts per square centimeter (mW/cm2) for contin uous exposure, and the total exposure time shall be limited to an 8-hour workday. This power den sity is approximately equivalent to a free-space electric field strength of 200 volts-per-meter rms (V/m) and a free-space magnetic field strength of 0.5 ampere-per-meter rms (A/m). 2. Exposures to CW power density levels greater than 10 mW/cm2 are permissible up to a maximum of 25 mW/cm2 based upon an average energy density of 1 milliwatt-hour per square centimeter (mWh/cm2) averaged over any 0.1 hour period. For example, at 25 mW/cm2, the permissible exposure duration is approximately 2.4 minutes in any 0.1 hour period. 3. For repetitively pulsed microwave sources, the average field strength or power density is calculat ed by multiplying the peak-pulse value by the duty cycle. The duty cycle is equal to the pulse duration in seconds times the pulse repetition rate in Hertz. Exposure during an 8-hour workday shall not ex ceed the following values which are averaged over any 0.1 hour period: Power Density 10 mW/cm2 Energy Density 1 mWh/cm2 Mean Squared Electric Field Strength 40,000 V2/m2 Mean Squared Magnetic Field Strength 0.25 A2/m2 Mumford. W.W., "Heat Stress Due to R. F. Radiation," Proceedings of IEEE, Vol. 57, No. 2. Feb. 1969, pp. 171-178. 81 sc 008341 LAM009551 sc 008342 4. Exposure is not permissible in CW or repetitively pulsed fields with an average power density in ex cess of 25 mW/cm2 or approximate equivalent free-space field strengths of 300 V/m or 0.75 A/m. NOISE These threshold limit values refer to sound pres sure levels and durations of exposure that represent conditions under which it is believed that nearly all workers may be repeatedly exposed without adverse effect on their ability to hear and understand normal speech. Prior to 1979, the medical profession had de fined hearing impairment as an average hearing threshold level in excess of 25 decibels (ANSI-S3.61969) at 500, 1000, and 2000 Hz, and the limits which are given have been established to prevent a hearing loss in excess of this level."11 The values should be used as guides in the control of noise exposure and, due to individual susceptibility, should not be regard ed as fine lines between safe and dangerous levels. It should be recognized that the application of the TLV for noise will not protect all workers from the ad verse effects of noise exposure. A hearing conserva tion program with audiometric testing is necessary when workers are exposed to noise at or above the TLV levels. Continuous or Intermittent The sound level shall be determined by a sound level meter, conforming as a minimum to the require ments of the American National Standard Specifica tion for Sound Level Meters, SI .4 (1971) Type S2A, and set to use the A-weighted network with slow meter response. Duration of exposure shall not ex ceed that shown in Table 7. These values apply to total duration of exposure per working day regardless of whether this is one continuous exposure or a number of short-term expo sures but does not apply to impact or impulsive type of noise. When the daily noise exposure is composed of two or more periods of noise exposure of different levels, their combined effect should be considered, rather than the individual effect of each. If the sum of the following fractions: Ci C2 C,, Ti T2 + ' ' T,, exceeds unity, then, the mixed exposure should be considered to exceed the threshold limit value, Ci in- 82 dicates the total duration of exposure at a specific noise level, and Ti indicates the total duration of ex posure permitted at that level. All on-the-job noise ex posures of 80 dBA or greater shall be used in the above calculations. Table 7 Threshold Limit Values Duration per day Hours 16 8 4 2 1 1/2 1/4 1/8 Sound Level dBAM 80 85 90 95 100 105 110 115* `No exposure to continuous or intermittent in excess of 115 dBA Figure 7 -- Threshold Limit Values for Impulse/Impact Noise. 83 LAM009552 sc 008343 a) In 1979, the American Academy of Ophthalmology and Otolargyngology (AAOO) included 3000 Hz in their hearing impairment formula. b) Sound level in decibels as measured on a sound level meter, conforming as a minimum to the require ments of the American National Standard Specifica tion for Sound Level Meters, SI.4 (1971) Type S2A, and set to use the A-weighted network with slow meter response. IMPULSIVE OR IMPACT NOISE It is recommended that exposure to impulsive or impact noise shall not exceed the limits listed in Table 8 or taken from Figure 7. No exposures in ex cess of 140 decibels peak sound pressure level are permitted. Impulsive or impact noise is considered to be those variations in noise levels that involve max ima at intervals of greater than one per second. Where the intervals are less than one second, it should be considered continuous. Sound Level dB** 140 130 120 Table 8 Threshold Limit Values Impulsive or Impact Noise Permitted Number of Impulses or Impacts per 100 1000 10,000 "Decibels peak sound pressure level, re 20 yPa ULTRAViOLET RADIATION* These threshold limit values refer to ultraviolet ra diation in the spectral region between 200 and 400 nm and represent conditions under which it is be lieved that nearly all workers may be repeatedly ex posed without adverse effect. These values for expo sure of the eye or the skin apply to ultraviolet radiation from arcs, gas, and vapor discharges, fluo rescent, and incandescent sources, and solar radia tion, but do not apply to ultraviolet lasers.' These val ues do not apply to ultraviolet radiation exposure of photosensitive individuals or of individuals concomi- 'See User TLVs. 84 tantly exposed to photosensitizing agents (Fitzpa trick, et al., eds., Sunlight and Man, Univ. Tokyo Press, Tokyo, Japan, 1974). These values should be used as guides in the control of exposure to continu ous sources where the exposure duration shall not be less than 0.1 sec. These values should be used as guides in the con trol of exposure to ultraviolet sources and should not be regarded as a fine line between safe and danger ous levels. Recommended Values: The threshold limit value for occupational expo sure to ultraviolet radiation incident upon skin or eye where irradiance values are known and exposure time is controlled are as follows: 1. For the near ultraviolet spectral region (320 to 400 nm) total irradiance incident upon the unprotected skin or eye should not exceed 1 mW/cm! for periods greater than 103 seconds (approximately 16 minutes) and for exposure times less than 103 seconds should not exceed one J/cm2. 2. For the actinic ultraviolet spectral region (200 -- 315 nm), radiant exposure incident upon the un protected skin or eye should not exceed the values given in Table 9 within an 8-hour period. 3. To determine the effective irradiance of a broad band source weighted against the peak of the spectral effectiveness curve (270 nm), the follow ing weighting formula should be used: Eefr = X E\ S\ A\ where: Eeff = effective irradiance relative to a monochromat ic source at 270 nm in W/cm2 (J/s/cm2) Ex = spectral irradiance in W/cm2/nm Sx = relative spectral effectiveness (unitless) AX = band width in nanometers 4. Permissible exposure time in seconds for expo sure to actinic ultraviolet radiation incident upon the unprotected skin or eye may be computed by dividing 0.003 J/cm2 by Eer in W/cm2. The expo sure time may also be determined using Table 10 which provides exposure times corresponding to effective irradiances in jiW/cm2. 85 LAM009553 TABLE 9 Relative Spectral Effectiveness by Wavelength* Wavelength (nm) 200 210 220 230 240 250 254 260 270 280 290 300 305 310 315 TLV (mJ/cm2) 100 40 25 16 10 7.0 6.0 4.6 3.0 3.4 4.7 10 50 200 1000 Relative Spectral Effectiveness s. 0.03 0.075 0.12 0.19 0.30 0.-43 0.5 0.65 1.0 0.88 0.64 0.30 0.06 0.015 0.003 TABLE 10 Permissible Ultraviolet Exposures Duration of Exposure Per Day Effective Irradiance, Ef/r (mW/cm2) 8 hrs..................................................... 0.1 4 hrs...................................................... 0.2 2 hrs...................................................... 0.4 1 hr....................................................... 0.8 30 min................................................... 1.7 15 min................................................... 3.3 10 min................................................... 5 5 min..................................................... 10 1 min..................................................... 50 30 sec.................................................... 100 10 sec.................................................... 300 1 sec..................................................... 3,000 0.5 sec.................................................. 6,000 0.1 sec...................................................30,000 All the preceding TLV's for ultraviolet energy apply to sources which subtend an angle less than 80. Sources which subtend a greater angle need to be measured only over an angle of 80. 86 SC 008344 LAM009554 WAVE LENGTH (NANOMETERS! ' Figure 8 -- Threshold Limit Values for Ultraviolet Radiation Conditioned (tanned) individuals can tolerate skin ex posure in excess of the TLV without erythemal effects. However, such conditioning may not protect persons against skin cancer. NOTICE OF INTENDED CHANGES (for 1980) These physical agents, with their corresponding values, comprise those for which either a limit has been proposed for the first time, or for which a change in the "Adopted" listing has been proposed. In both cases, the proposed limits should be consid ered trial limits that will remain in the listing for a period of at least one year. If after one year no evi dence comes to light that questions the appropriate ness of the values herein the values will be reconsi dered for the "Adopted" list. 88 NOTICE OF INTENT TO ESTABLISH THRESHOLD LIMIT VALUES LIGHT AND NEAR-INFRARED RADIATION These Threshold Limit Values refer to visible and near-infrared radiation in the wavelength range of 400 nm to 1400 nm and represent conditions under which it is believed that nearly all workers may be exposed without adverse effect. These values should be used as guides in the control of exposure to light and should not be regarded as a fine line between safe and dangerous levels. Recommended Values: The Threshold Limit Value for occupational expo sure to broad-band light and near-infrared radiation for the eye apply to exposure in any eight-hour work day and require knowledge of the spectral radiance (LJ and total irradiance (E) of the source as mea sured at the position(s) of the eye of the worker. Such detailed spectral data of a white light source is gener ally only required if the luminance of the source ex ceeds 1 cd cm-2. At luminances less than this value the TLV would not be exceeded. The TLV's are: 1. To protect against retinal thermal injury, the spec tral radiance of the lamp weighted against the function R (Table 11) should not exceed: 1400 Vi SL^AAsl/af 400 (1)* where Lk is in W cm-2 si~' and t is the viewing du ration (or pulse duration if the lamp is pulsed) lim ited to 1 /us to 10 s, and a is the angular subtense of the source in radians. If the lamp is oblong, a refers to the longest dimension that can be viewed. For instance, at a viewing distance r = 100 cm from a tubular lamp of length I = 50 cm, the view ing angle is: a =l/r =50/100 =0.5 rad (2) 2. To protect against retinal photochemical injury from chronic blue-light exposure the integrated spectral radiance of light source weighted against the blue-light hazard function Bk (Table 11) should not exceed : 1400 Lxt Bx A\ 100 Jem-2 sr_1 (t == 104s) (3a) 1400 L.Bx AX == 10"2 Wcrrr2 sr'1 (t >104s) (3b) 89 SC 008345 LAM009555 For a source radiance L which exceeds 10 mW/cnrr2 sr1 in the blue spectral region, the per missible exposure duration tm,, in seconds is sim ply: tmoJ- = 100 J cm-2 sr-1 /L (blue) (4) The latter limits are greater than the maximum per missible exposure limits for 440 nm laser radiation (see Laser TLV) because a 2-3 mm pupil is as sumed rather than a 7 mm pupil for the Laser TLV. For a light source subtending an angle a less than 11 mrd (0.011 radian) the above limits are relaxed such that the spectral irradlance weighted against the blue-light hazard function B X should not ex ceed: 1400 4S E,, t Bx AX S10 mJ cm_2(t s i04s) (5a) 1400 AXSlpVV cm2(t a10"s) (5b) 400 For a source where the blue light weighted irradiance E (blue) exceeds 1 /xW crrr2 is the maxi mum permissible exposure duration t max in sec onds is: t max = 10 mJ cm~2E (blue) (6) 3. Infrared Radiation: To avoid possible delayed ef fects upon the lens of the eye (cataractogenesis), the infrared radiation (X > 770 nm) should be lim ited to 10 mWcm~2. For an infrared heat lamp or any near-infrared source where a strong visual stimulus is absent, the near infrared (770-1400 nm) radiance as viewed by the eye should be limited to: 1400 . ^ L, AX = 0.6/a (7)* for extended duration viewing conditions. This limit is based upon a 7 mm pupil diameter. "Formulae (1) and (7) are empirical and are not, strictly speaking, di mensionally correct. To make trie formulae dimensionally correct, one would riave to insert a dimensional correction factor k in the right hand numerator in each formula. For foimula (1) this would be k, = 1 W rad sVi/(cm! sr). and for formula (7) k, = 1 W rad/(cm* sr). 90 TABLE 11 SPECTRAL WEIGHTING FUNCTIONS FOR ASSESSING RETINAL HAZARDS FROM BROAD -- BAND OPTICAL SOURCES Wavelength (nm) 400 405 410 415 420 425 430 435 440 445 450 455 460 465 470 475 480 485 490 495 500-600 600-700 700-1049 1050-1400 Blue-Light Hazard Function B>. 0.10 0.20 0.40 0.80 0.90 0.95 0.98 1.0 1.0 0.97 0.94 0.90 0.80 0.70 0.62 0.55 0.45 0.40 0.22 0.16 j Q ((450--X)/501 0.001 0.001 0.001 Burn Hazard Function Rn 1.0 2.0 4.0 8.0 9.0 9.5 9.8 10 10 9.7 9.4 9.0 8.0 7.0 6.2 5.5 4.5 4.0 2.2 1.6 1.0 1.0 "JQK700-M/505] 0.2 SC 008346 LAM009556 AIRBORNE UPPER SONIC AND ULTRASONIC ACOUSTIC RADIATION These threshold limit values refer to sound pres sure levels that represent conditions under which it is believed that nearly all workers may be repeatedly ex posed without adverse effect. The values listed in Table 15 should be used as guides in the control of noise exposure and, due to individual susceptibility, should not be regarded as fine lines between safe and dangerous levels. The levels for the third octave bands centered below 20 kHz are below those which cause subjective effects. Those levels for 1/3 octaves above 20 kHz are for prevention of possible hearing losses from subharmonics of these frequencies. TABLE 12 Permissible Ultrasound Exposure Levels Mid-Frequency of Third-Octave Band kHz One-Third Octave -- Band Level in dB re 20 pPd. 10 80 12.5 80 16 80 20 105 25 110 31.5 115 40 115 50 115 PULSED ULTRAVIOLET LASER EXPOSURES FOR EXPOSURE DURATION LESS THAN ONE MILLISECOND TLVs for pulsed Ultraviolet Laser Exposures for Expo sure Durations Less than One Millisecond. These changes would expand the scope of the present TLVs for Laser radiation to include pulsed ultraviolet laser exposure. 1. Table 3 would be modified such that the lower ex posure duration limit of 10~3s now given for the UVC and UVB be changed to 10~9s. An additional notation would be made to the right side of the TLV column: "Not to exceed 0.56 t'/4 J cm-1." 2. Tables 4 and 6 would be modified such that the lower exposure duration of 10~Js now given for the UV be changed to 10~9s. 92 PHYSICAL AGENTS UNDER STUDY The Physical Agents Committee of ACGIH has ex amined the current literature and has not found suffi cient information to propose a TLV. However, these agents will remain under study during the coming year to examine new evidence indicating the need and feasibility for establishing a proposed TLV. Com ments and suggestions, accompanied by substantive documentation are solicited and should be forwarded to the Executive Secretary, ACGIH, Documentation summarizing the current status of the biological ef fects literature is available on those agents preceded by an asterisk (*). 1. Radiofrequency Radiation. Specifically, that por tion of the spectrum from 10 MHz to 100 MHz. 2. 'Extremely Low Frequency (ELF) Radiation. Spe cifically, that portion of the spectrum from 0 to 300 Hz. 3. Magnetic Fields. Both pulsed and'continuous. 4. Laser Radiation. Specifically laser exposures of less than one (1) nanosecond. 5. Vibration. Segmental and whole-body. 6. Cold Stress. 7. Pressure Variations. 93 SC 008347 LAM009557 The American Conference of Governmental Industrial Hygienists was organized in 1938 by a group of gov ernmental industrial hygienists who desired a medi um for the free exchange of ideas, experiences and the promotion of standards and techniques in indus trial health. The Conference is not an official Govern ment Agency. It is an organization devoted to the development of administrative and technical aspects of worker health protection. The association has contributed substan tially to the development and improvement of official industrial health services to industry and labor. The committees on Industrial Ventilation and Threshold Limit Values are recognized throughout the world for their expertise and contributions to industrial hy giene. Membership is limited to professional personnel in governmental agencies or educational institutions en gaged in occupational safety and health programs. The more than 2300 members from across the United States and around the world give the organization an international scope. SC 008348 LAM009558 TfiTs information supplied by Industrial Hygiene Section Dept. of Med. & Environ. Health Monsanto Company St. Louis. Mo. ISBN: 0-936712-29-5 SC 008349 LAMQ09559