Document Gz6nGqR4Myo0y2K31Q2x6Y5O7

Air System Equipment , cSdeSSf* Snrfaces / AcrnE inousTRiES, inc. JACKSON, MICHIGAN, U. S. A. Manufacturers of Quality Air Conditioning and Refrigeration Equipment since 1919 37 years experience stands behind these ACME products Since 1919 Acme has been building units to serve the air conditioning and re frigeration field. They have experi mented with thousands of models and installations. Today, Acme has a com plete line of commercial refrigeration and air conditioning equipment. Specify Acme on your installations. FLOW-THERM LIQUID CHILLER Complete, compact, packaged units of advanced design for air conditioning, heat pump and liquid cooling applica tions. Proven Acme components pre piped, tested and ready for operation. With compressor or without. Capacities --20 through 300 ton. ACME DRY-EX WATER CHILLERS For cooling water, brines, and other fluids by direct expansion of the re frigerant. Capacities from 5 to 300 ton. FREON and AMMONIA CONDENSERS The standard of the industry. Enough production combinations to assure you of the most efficient operation available. Capacities from to 700 ton. EVAPORATIVE CONDENSERS and COOLING TOWERS Solid, sturdy, dependable. All fabri cated steel parts are hot-dip galvanized after fabrication assuring long life. Prime surface coils or specially designed Acme Pak for Freon or Ammonia in stallation. Capacities from 2 to 150 ton. THE FLOW-COLD LINE A factory assembled and tested packaged liquid chiller designed for industrial process temperature control and air conditioning. Used as a heat pump for both heating and cooling. Capacities-- 3 through 20 ton. HEAT EXCHANGERS, LIQUID RECEIVERS, OIL SEPARATORS Freon suction and liquid line heat ex changers with capacities from 3 to 200 tohs; more than 70 standard sizes of liquid receivers for Freon, Ammonia, or other refrigerants; and a complete line of Freon or Ammonia Oil Sepa rators for Yi to 100 ton systems. Write for catalogs and more Information on any ACME product. 1358 Air System Equipment Heat Transfer Surface Afro fin Corporation 101 Greenway Avenue Syracuse 1, N. Y. AtROflN Standardized Light-weight Heat Exchange Surface There is a factoxy-tralned Aerofin application and service engineer located near you to give you prompt service. Write, wire or phone the factory. Aerofin is the modern Standardized Light-Weight Encased Fan System Heat ing and Cooling Surface originated by Fan Engineers to meet the present and future requirements"~of-- this highly specialized field. All Standard Aerofin Units are furnished as completely en cased Units, ready for pipe and duct connections. The patent casings are built of pressed steel and are exception ally strong and rigid, protecting the Unit from all the strains of pipe connections and expansion or contraction in service. The casings are flanged on both faces, top and bottom, and template punched for bolting together adjacent Units, or for duct connection. units or for installing in ducts. May be installed either horizontally or ver tically. Used on any two-pipe steam system for preheating or reheating. Modulating control on preheaters. Available in 13 lengths and 3 widths, from net face area of 2.76 sq ft to 26.28 sq ft. Fig. t Aerofin Non-freeze heater (Fig. 1) is non-freeze, non-stratifying spiral fin qoil built into casing for air conditioning Flexltube Aerofin (Fig. 2) is distin guished from all other developments by its off-set tubes, so arranged as to absorb all expansion and contraction strains. Headers--Steel. Tubing--% in. O.D. copper, admiralty or aluminum. Joints--Where admiralty or copper tubes are used together with bronze or steel headers tubes are brazed to headers. Where both aluminum tubes and headers are used tubing is welded to headers. Casings--Copper, aluminum or gal vanized iron. Design--Constructed with headers on opposite ends making possible installa tion of units with tubes horizontal or vertical. 1359