Document G5Ra5jM04QXjkxBX4YL24ZKe4

two years, then a sudden drop appeared, indicating trouble Inspection indicated that the stator windings required replacement, and the correction was made without loss of production Courtesy Associated Research, Inc tncal conductors without deenergizing the circuit Thus, a shutdown of circuit-con nected production equipment in the plant is unnecessary With this quick method of fault location, correction can be made in a minimum amount of time, instead of allowing the fault to con tinue and become more senous and cause a complete electrical interruption The wattmeter measures the amount of power taken by a load, m watts The industrial analyzer is a composite meter that measures current, voltage, power, and power factor m single and polyphase circuits This instrument gives a complete analysis of a particular motor or of the com plete plant load in practically any situation It eliminates the maze of wiring needed if the four separate instruments are used A recording instrument gives a round-theclock check on voltage, current, and power A stylus marks a calibrated chart, which can be removed and kept as a permanent record In addition to its use for routine load sur veys and checks on peak loading, the record ing instrument can keep a running check on individual motor loads, to prevent sustained overloading and resultant equipment break down 999