Document G5KyMBkLrpVXeQb2VZvk8VqoY

Repair Specification ekaages t Itm 58*1. f Sepal? Spec, a Subject Vessel dated April 5, 1963. A. All bare and eusty areas of the &nttm exterior shall sur ism irm keel t rail t be thorsagbly sad*a*p. Oil sad grease to be ffeeved mt approved then washed 4 mitk fresh water under pressure* sad amble palate applied as specified. * * Apply tee <2) costs of modified epoxy privet #56$ t all fear areas, then apply na& 11} full coat of saodified epoxy #567 sad erne Cl) full cost of aerified epoxy #591. (this doe sot include 730-3 sq ft* of sandblasted surface covered is separate least.) C. " Ail bate spots to be touched up with two <2) coats of modified epoxy #566. ffctea apply @n (i> full mat of ttcdtfied epoxy #56? and CD fall coat of 4ified epoxy #5fl. .igeP-leM.:...-Uiie.....fcc..gaM .CtoosMes) - Tovclt up all bare spots with two (2) coats of modified epoxy #566. The apply sae CD full cost of aassSifleii epoxy #5? and 0m (l) full coat of modified epoxy #597. E. Miscellaneous E&paimk vessel * nase* hailing port, pliasol marks* and draff narks. F. iStettaral Paint will be supplied fey Owners. Faint may be sprayed os. Drying time allowed between each coat of primer or palm to fee in full accordant with H&tmimmmz* recossmeadatloss. Mi services fee fee inspeefeed and approved fey Owner*8 Representative before applying priming coefc and before applying each additional :mmt* Ho painting to be done except during clear and dry weather. WESs eg April 25, 1963 ( EXX-MOR-005938 Repair Specification SS ESSO GETTYSBURG 4 Changes to Item 58-1 of Repair Spec, on Subject fessei dated April 5, 1963. MmMsh . Hull . Painting-113 A. All bare and rusty areas of the entire exterior shell sur face from keel to rail to fee thoroughly sand-swept. Oil and grease to be removed using approved solvent, then washed down with fresh water under pressures and Humble paints applied as specified. * light.JLSS&jykqS*.and sfcegn.frame - Apply two (2) coats of modified epoxy primer #566 to all bare areas. Then apply one (1) full coat of modified epoxy #567 and one (1) full coat of modified posy #591. (This does not include 7309 aq. ft. of sandblasted surface covered in separate Item.) % Light to deep load line - All bare spots to fee touched up with two (2) coats of edified epoxy #566. Then apply one <1> full coat of modified epoxy #567 and one (!) full coat of modified epoxy #591. - Touch up all bare spots with two (2) colts' of modified epoxy #566. Then apply one (1) full coat of modified epoxy #567 and one (1) full emt of modified epoxy #597. % Miscellaneous - Repaint vessel's name., hailing port., pliasoi marks, and draft: marks. F. general - Faint will be supplied by Owners. Faint may be sprayed on. atry-lng time allowed' between each coat of primer or paint to be in full accordance with Manufacturer's recommendations. Ail services to be inspected and approved by Owner's Representative before applying priming coat and before applying each additional coat. Mo painting to be done except during clear and dry weather-. k: ir&Ri eg April 25, 1963 / ( EXX-MOR-005939