Document Exw9Deq5gDYnz15LbGjKerGoL

Black metal can with wire handle (approx. 5-1/2" tall) On a yellow strip at the top of the can, in black lettering, is the following: STRICTLY PURE -- 12 1/2 LBS. NET Under this is the Dutch Boy print in yellow with "TRADE MARK GEG. U.S. PAT. OFF. " to the left of the Boy. Just under the Boy in large yellow script are the words "Dutch Boy." At the bottom of the can is another yellow strip with black letters (1/2" high): "HEAVY PASTE WHITE LEAD" The above also appears on the opposite side of the can. Between the two "panels" a yellow panel is lettered in black as follows: REPAINTING OUTSIDE WOOD ** FIRST COAT FINISH COAT 1/4 TURPENTINE * 1/4 DUTCH BOY LINSEED REPLACEMENT OIL * 1/2 DUTCH BOY LINSEED REPLACEMENT OIL * 1/2 WHITE LEAD 1/2 WHITE LEAD UNPAINTED OUTSIDE WOOD First prime with 3 parts white lead, replacement oil and 2 parts turpentine. coats. 4 parts linseed Then use above 2 COMPOSITION (BY WEIGHT) BASIC CARBONATE WHITE LEAD .91%+ PURE LINSEED OIL........................... 9%+ 1~ NATIONAL LEAD COMPANY GENRAL OFFICES NEW YORK 6, N.Y. *yellow letters on black **It appears there is lettering above the words "Repainting Outside Wood;" however, a metal piece soldered onto the can to hold the handle covers up the lettering -- only an "S" at the end is visible. NLI 121508 I White Lead - 12-1/2 lbs, (approx. 4-1/2 Front and Back DUTCH BOY SOFT PASTE WHITE LEAD STRICTLY PURE tall, 6-1/4" diameter at top) Side TRADE MARK REG U.S. PAT. OFF. 12 1/2 LBS. COMPOSED OF NET PURE WHITE LEAD 88%+ PURE LINSEED OIL 10%+ TURPENTINE __ % TOTAL 100% MADE BY NATIONAL LEAD COMPANY GENERAL OFFICES - NEW YORK, N.Y. Side MIXING DIRECTIONS REPAINTING EXTERIOR WOOD First Coat Finish Coat 1/4 TURPENTINE 1/4 LINSEED OIL 1/2 WHITE LEAD 1/2 LINSEED OIL 1/2 WHITE LEAD UNPAINTED WOOD: FIRST PRIME WITH 3 PARTS WHITE LEAD, 4 PARTS LINSEED OIL, 2 PARTS TURPENTINE. THEN USE ABOVE TWO COATS. DRIER: IF RAW LINSEED OIL IS USED ADD 1/4 PINT DRIER TO EACH GALLON OF PAINT MIXED. BOILED LINSEED OIL REQUIRES NO DRIER. INTERIOR WORK: USE LEAD MIXING OIL WITH WHITE LEAD. DIRECTIONS ON CAN. NLI 121510 FRONT and BACK SIDE NLI 121511 SIDE NLI 121512 Back * Dutch Boy SOFT PASTE WHITE LEAD REPAINTING OUTSIDE WOOD USE FIRST COAT AND FINISH COAT AS SHOWN IN DIAGRAMS ** AT LEFT AND AT RIGHT. UNPAINTED OUTSIDE WOOD FIRST PRIME WITH 3 PARTS WHITE LEAD, 4 PARTS LINSEED OIL, 2 PARTS TURPENTINE THEN USE ABOVE TWO COATS DRIER: WITH RAW OIL, ADD 1/4 PINT TO EACH GALLON OF PAINT FOR ALL COATS. BOILED OIL REQUIRES NO DRIER. COMPOSITION -- BY WEIGHT BASIC CARBONATE WHITE PURE LINSEED OIL MINERAL SPIRITS LEAD 88%+ 10%+ _%+ 100% NATIONAL LEAD COMPANY GENERAL OFFICES -- NEW YORK NY (FIGURE TO LEFT) First Coat 1/4 TURPENTINE 1/4 LINSEED OIL 1/2 WHITE LEAD (FIGURE TO RIGHT) Finish Coat 1/2 LINSEED OIL 1/2 WHITE LEAD NLI 121513 Soft Paste White Lead - 50 LBS, (approx 7-1/2" tall, 9-3/8" diameter at top) STRICTLY PURE REG. U.S. PAT.OFF. Dutch Boy 50 LBS. NET SOFT PASTE WHITE LEAD NLI 121514 BACK NLI 121515