Document Ev5BQxdGjvrGn5YwdXdK3kKvb

77640 federal Register / Vol. 45. No. 228 / Monday. November 24.1980 / U.S. Regulatory Council DOL-OSHA Standard for Occupational Exposure to Asbestos (29 CFR 1910.1001*) Legal Authority Occupational Safety and Health Act of 1970, 29 U.S.C. S 655. Reason for Including This Entry The Occupational Safety and Health Administration (OSHA) thinks this regulation is necessary to protect workers from the carcinogenic risks and other adverse health effects associated with exposure to asbestos. Statement of Problem A preliminary report indicated that 2.3 to 2.5 million employees have some degree of occupational exposure to asbestos. Of this total, 180,000 to 400,000 are in the construction industry and the remaining 2.1 million are in general industry. A significant number of these employees are exposed to airborne asbestos levels at or near OSHA's existing permissible exposure limit (2,000.000 fibers per cubic meter). This limit was established in 1972 for the limited purpose of reducing the incidence of asbestosis, rather than cancer. 'The National Institute for Occupational Safety and Health (NIOSH) and other sources have provided data to OSHA which indicate that the present OSHA exposure limit may be inadequate to protect workers from asbestos-related disease. Exposure to asbestos can cause asbestosis (a diffuse, nonmalignant, scarring of the lungs), lung1 cancer, and mesothelioma (a cancer of the chest and abdominal cavity linings of exposed workers). Recent epidemiologic evidence indicates these diseases may be induced at very low levels of exposure, and experimental data in animals suggest that all forms of asbestos present a health hazard. OSHA is developing a proposal to revise the current standard for occupational exposure to asbestos. The regulation would set a permissible exposure limit (PEL) for employee exposure to asbestos, and affected industries would have the opportunity to implement control measures to achieve the PEL for their operations in the most cost-effective manner. Failure to promulgate new regulations will prolong the occurrence of disease, disability, and mortality associated with asbestos exposures. Alternatives Under Consideration The Agency is currently considering two alternative PELs: (A) a 500,000 fiber per cubic meter (fiber/m3) 8-month timeweighted average (TWA) with a 5,000,000 fiber/m1 ceiling (above which no employee may be exposed) and (B) a 100,000 fiber/m5 TWA with a 500,000 fiber/m9 ceiling. For each of these alternatives; other revisions to current' provisions for engineering and work practice controls, hygiene facilities, medical surveillance, respirators, training, etc., may be included in the proposed regulations. Studies indicate that all commercially available forms of asbestos are cancercausing agents.' Some scientists argue that all asbestos materials, therefore, should be regulated equally. Others believe that different asbestos forms ' display varying degrees of toxicity and that OSHA should develop separate standards based on data associated with each specific asbestos mineral. OSHA will consider the merits of each of these regulatory options. Still another approach is to establish regulations for asbestos on the basis of the feasibility of compliance for different industries. Specific requirements of the standard would differ according to the feasibility of various control measures in different' industries or processes, such as construction versus general industry. LAM 001379 DPMC-17077 Federal Register / Vol. 45, No. 228 / Monday, November 24, 1980 / U.S. Regulatory Council . 77841 We.do not anticipate issuing an vinyl tile, carpeting, and hardwood Regulations (45 FR 38971, May 30.1930). NPRM until late Winter 1980, and flooring. This evaluation is currently being currently have no preferred alternative. The direct benefit we expect from updated by OSHA. Summary of Benefits controlling exposure to asbestos is a reduction in the incidence and Indirect costs attributable to additional regulation hinge on the Sectors Affected: Workers and prevalence of the health effects cited in estimated impact of the use of substitute establishments in manufacturing, "Statement of Problem." OSHA has not products and their likely consequences retail trade, construction and service industries which produce or use asbestos-containing products; users of these products; establishments manufacturing substitutes for asbestos or asbestos-containing products; and the general public. Affected industries include the primary manufacturers of asbestos products; secondary fabricators in the ' automobile aftermarket shipbuilding and repair, and elsewhere; and the construction industry. The primary manufacturers are largely grouped in Standard Industrial Classification (SIC) Code 3292 (asbestos products), and many of these establishments also perform some secondary fabrication. Shipbuilding and repair is included in SIC Code 3731. The automobile aftermarket includes establishments which repair, resurface, and repackage such friction parts as brake shoes and clutch faces. The establishments involved are located in SIC Code 55 (automotive dealers and gasoline stations), SIC Code 3714 (motor vehicle parts and repair), and SIC Codes 7538 and 7539 (general automotive repair shops, and automotive repair shops not elsewhere classified). Other secondary fabricators are located in SIC Code 3293 (gaskets, packing, and sealing devices), and in many other SIC Codes too numerous to list here. Construction (SIC Codes 15-17) will also be affected where asbestos-containing products are used, such as roofing felt, asbestos-cement pipe, asbestos-cement siding, and some forms of floor tile. Establishments which produce substitutes for asbestos or asbestos- yet completed an analysis of the for health, safety, and product quality. benefits expected by reducing exposures Costs associated with the most stringent to any of the alternative levels being alternative could result in a significant considered. However, because of the use of substitutes for asbestos fibers and large numbers of workers exposed, and asbestos-containing products. The the accumulated evidence on the extent of this substitution is under toxicity of even low levels of asbestos investigation by OSHA and quantitative - exposure, the numbers are expected to estimates are presently unavailable. We be large. Such reductions in mortality are also evaluating the health and safety and morbidity will result in reduced effects of likely substitutes but, again, pain and suffering for employees, and in no qualitative or quantitative estimates savings in medical expenses and lost can be ventured at this time. output which would otherwise occur. Indirect benefits from controlling Related Regulations and Actions asbestos exposures to either of the Internal: We are planning to modify alternative levels will include reductions the existing OSHA standard for in the burden placed on such public asbestos, found at 29 CFR 1910.1001 of support programs as Medicare and the Agency's General Industry Medicaid, Welfare, and Worker's Standards, which specifies an 8-hour Compensation. In addition, improved time-weighted average of 2,000,000 worker health and safer working fibers/m1. Other provisions of the conditions are likely to reduce employee standard address monitoring, medical turnover and raise labor productivity. surveillance, training, respirators, Finally, further controlling asbestos recordkeeping, protective clothing, and exposures will stimulate a search for methods of compliance. asbestos substitutes and for alternatives On October 7,1975, OSHA published to asbestos-containing products, and it a notice proposing to revise the current will induce employers to innovate asbestos standard and to reduce the PEL improved control technologies. With to 500,000 fibers/m 1 (40 FR 3392). We less asbestos and fewer asbestos are performing analyses of the economic products used, consumers will benefit as and technological impact of that and incidental asbestos exposures will alternative exposure levels. decline. External: Regulatory measures are Summary of Costs under consideration by the Environmental Protection Agency (EPA) Sectors Affected: Workers and establishments in manufacturing, retail trade, construction, and service industries which produce or use asbestos-containing products; and consumers of these products. The costs of the regulatory options being considered are largely the capital and the Consumer Product Safety Commission (CPSC). EPA/CPSC published an ANPRM for asbestos use in October 1979. EPA currently has a national emission standard for asbestos (38 FR 8820) and CPSC regulates uses of asbestos in certain consumer products. containing products will also be and operating expenses which the Active Government Collaboration affected. Although a complete enumeration of such substitutes and their respective SIC Codes is not included here, a partial listing is as follows: Substitutes for asbestos itself, in various uses, include fibrous glass (SIC Code 322), mica (SIC Code 329), graphite-carbon fibers (SIC Code 329), nylon (SIC Code 228), polypropylene (SIC Code 282), and others. A large number of substitutes also exist for asbestos-containing products. Iron or polyvinyl chloride pipe (produced in SIC Codes 33 and 307) can be substituted for regulated firms will incur in order to - An OSHA/Environmental Protection comply. Because these cost increases Agency/Consumer Product Safety may raise the prices of asbestos- Commission task group will coordinate containing products, the quantity development of an appropriate demanded of such products may decline. regulatory response to possible health Higher prices of asbestos products hazards associated with asbestos. would result in a switch to presently Information-sharing activities with other unregulated substitutes. To the extent governmental agencies, such as the that some of the substitutes have National Institute for Occupational adverse health or safety effects, these < < Safety aiid Health, Food and Drug will also be costs of the regulation. The Administration, and Department of extent of this substitution is under Agriculture, are underway. investigation and quantitative estimates are presently unavailable. Timetable asbestos-cement pipe. Substitutes for A preliminary evaluation of the NRPM--Late Winter 1980. asbestos-cement siding include vinyl, potential impact on industry of Regulatory Analysis--Winter 1980. aluminum, and wood siding; substitutes regulation of asbestos was reported in Public Hearing--Following NPRM. for vinyl-asbestos floor tile include pure the previous Calendar ofFederal Public Comment Period-- LAM 001380 DPMC-17078 77842 Federal Register / Vol. 45. No. 228 / Monday, November 24,1980 / U.S. Regulatory Council Approximately 30-00 days following NPRM. Final Rule--Winter 1981. Final Rule Effective--To be determined. Available Documents "Occupational Exposure to Asbestos," NPRM (40 FR 47652 October 7.1975). and comments received in response to the NPRM (OSHA Docket No. H-033). "Criteria for a Recommended Standard. . . Occupational Exposure to Asbestos" (NIOSH-HEW, 1975): updated Criteria Document (1976). "Workplace Exposure to Asbestos: Review and Recommendations" i (NIOSH-OSHA), April 198a These documents are available by mail and for review and copying at the OSHA Technical Data Center, Room S6212,200 Constitution Avenue, N.W* Washington, DC 202ia A fee is usually charged for copies of these documents. Agency Contact Bailus Walker. Director Directorate of Health Standard Programs U.S. Department of LaboMDSHA Washington. DC 20210 (202)523-7075 LAM 001381 DPMC-17079 77868 Federal Register / Vol. 45. No. 228 / Monday. November 24,1980 / U.S. Regulatory Council EPA-OPTS ntJ Rules Restricting the Commercial and Industrial Use of Asbestos Fibers (40 CFR Part 763) Legal Authority Toxic Substances Control Act (TSCA). 15 U.S.C. {{ 2601 and 2805. Reason for Including This Entry The Environmental Protection Agency (EPA) has included this action because of its potential economic impact on the asbestos industry. The economic cost of the rule will probably exceed $100 million. We may prohibit a large portion of the domestic production and importation of asbestos-containing products into the United States. Statement of Problem Epidemiological studies have established that exposure to asbestos fibers can contribute to increased risk of lung damage (asbestosis) and human cancer of several kinds. EPA is concerned that in spite of past governmental regulation of asbestos, millions of Americans may be exposed to levels, of asbestos that significantly increase the risk of contracting asbestos-related diseases. (Past regulations are cited below under Related Regulations and Actions.} Currently, more than two million workers are exposed to asbestos fibers (at levels higher than background) in their places of employment In addition, the 159 million Americans who live in urban areas may be exposed to asbestos fiber levels that significantly increase the risk of contracting asbestos-related diseases. EPA is concerned that asbestos fiber emissions from the mining, milling, processing, or distribution of asbestos or from the use. misuse, or disposal of asbestoscontaining products might cause significant pollution of urban air. It is difficult to estimate the number of people who will contract asbestosrelated diseases at current exposure levels. Data on mortality rates are available for workers who are exposed to asbestos fiber levels considerably higher than general population exposures. EPA will extrapolate to predict risks for the general population. EPA is conducting this regulatory program because the Agency is not convinced that existing regulations have adequately protected the public. These regulations have focused on limited aspects of the asbestos exposure problem, such as worker exposures, air emissions from manufacturing facilities, LAM 001382 DPMC-17080 / Federal Register / Vol. 45, No. 228 / Monday, November 24,1980 / U.S. Regulatory Council 77869 and some consumer products. of alternative B over alternative A is asbestos-related risks. However, the Regulation under the Toxic Substances that the marketplace would decide EPA Administrator might find that it is Control Act (TSCA) would eliminate which uses of asbestos should continue. in the public's interest to regulate under unreasonable human health risks from Alternative C involves developing TSCA because the limited mandate of all asbestos-related activities. The other marketplace strategies. A these other laws results in continued comprehensive mandate of TSCA disadvantage of both alternatives B and risk from asbestos. enables EPA to reduce health risk from sources that are difficult to control through medium-specific or sourcespecific regulation authorized under other Federal authorities. Under TSCA, EPA is currently investigating the cumulative effects of exposure to asbestos throughout its life cycle in C is that since they have never been attempted before, the implementation problems are unknown. Also, there would be no guarantee of eliminating products that present a particularly high health risk. For example, if a product with fibers that are easily released commands a relatively high price, it Alternative F, taking no regulatory action, would benefit the asbestos industry since it would incur no costs. However, there would also be no reduction in the exposure to asbestos in the United States. Summary of Benefits commercial and industrial products from mining and milling through processing, product manufacturing, use, and disposal. Our preliminary studies indicate substantial continuing exposure of millions of people to the ever growing inventory of asbestos sources. As a result of this study, the Agency expects to promulgate rules to prevent and might remain in the marketplace much longer than if it were regulated specifically. However, if necessary, a market strategy could be modified to eliminate this problem. EPA is considering imposing a labeling requirement (alternative D) either in addition to or in lieu of other. requirements. A labeling rule would Sectors Affected: Establishments and .workers in the asbestos industry (including asbestos mining and asbestos product manufacturing); the general public; and establishments that manufacture asbestos substitutes. At this early stage of development of EPA'b rule, it is difficult to estimate reduce any unreasonable risks that are identified. have considerably less economic impact benefits in quantitative terms. than alternatives A. B, or C, and it Regulation will decrease the incidence Alternatives Under Consideration would also provide less direct protection of asbestosis and lung cancer in the to public health. Alternative D, if United States, thereby decreasing the EPA is considering the following implemented alone, would increase number of worker-days lost due to alternative actions: (A) prohibiting the awareness of the hazards of asbestos worker sickness, increasing space manufacture, processing, distribution in and would increase recognition of available in hospitals, and decreasing commerce, and importation of asbestos products that can cause these health costs due to illness and premature for all nonessential asbestos uses; (B) risks. However, it would not force any death. restricting the quantity of fibers that reduction in exposure to asbestos fibers. EPA regulation of asbestos should could be mined and imported, or EPA is considering either regulating increase demand for substitutes such as processed annually in the United States, under other Federal laws administered fiberglass, ceramic fibers, thus allowing the marketplace to by EPA or not regulating in deference to polyvinylchloride, and ductile iron pipe. determine which products and uses to other Federal agencies (alternative E). Therefore, manufacturers and eliminate; (C) developing other marketplace regulatory strategies; (D) requiring labeling of asbestos containing products; (E) regulating under laws other Several comments on the ANPRM (44 FR 60056, October 17,1979) indicated that industry does not consider TSCA to be appropriate authority for regulating distributors of substitutes should benefit from regulation. Summary of Costs than TSCA; and (F) taking no regulatory action. EPA's choice of a regulatory program will depend on the seriousness of the risks and the identification of the major sources of exposure. EPA suspects that much of the asbestos to which the public is exposed comes from emissions caused by mining, milling, and processing asbestos fibers; emissions resulting from the use of asbestoscontaining products may not be as significant In that case, EPA would want to reduce risks from mining, milling, and processing as much as possible (alternative A). A disadvantage asbestos and that further Federal regulation, if needed, should be implemented under other laws, particularly the Occupational Safety and Health Act (OSH Act). Although the Occupational Safety and Health Administration (OSHA) has announced its intention to lower its workplace standard to 0.1 fiber per cubic centimeter, OSHA lacks the legislative mandate to address the problem of asbestos exposure outside of the workplace. EPA action to restrict production and importation of products containing asbestos may be necessary to complement the OSHA workplace Sectors Affected: Establishments and workers in the asbestos industry (including asbestos mining and asbestos product manufacturers); and their suppliers; importers of asbestos and asbestos products; and users of asbestos products. Because EPA has not completed its analysis of economic effects, cost estimates are not available. Asbestos mines and asbestos processors will be forced to reduce production, and many processors will be forced out of the asbestos business. EPA plans to regulate in a manner that will allow asbestos of alternative A would be that both the standard for airborne asbestos. processors time to convert to affected industry and EPA would be Any action by the Consumer Product substitutes. Small businesses may seek involved in extensive exemption Safety Commission (CPSC) would not aid from the Small Business proceedings. affect production of industrial asbestos- Administration to obtain capital to Alternative B is a possible substitute containing products, and these convert It is too early to predict the for alternative A. The allocation of production processes may cause effect of regulation on employment. EPA quotas could be a very difficult process significant fiber emissions. hopes that jobs lost from the asbestos and could result in some inequities A combination of EPA actions under industry will be offset by jobs gained in within the industry. Further, at this time the Clean Air Act, Clean Water Act, the substitutes industries. Substitute it is not clear that the economic impact Safe Drinking Water Act Resource products generally cost more than of such an approach would be any less Conservation and Recovery Act and asbestos-containing products, and these than alternative A. The major advantage other laws might significantly reduce costs will be passed on to consumers. LAM 001383 DPMC-17081 77870 Federal Register / Vol. 45, No. 228 / Monday, November 24,1980 / U.S. Regulatory Council Related Regulations and Actions occupational standard be promulgated Internal: EPA has established National Emission Standards for Hazardous Air Pollutants for several asbestos sources under the Clean Air Act, 42 U.S.C. S 7401 et seq. EPA is developing effluent guidelines regulating wastewater discharges of asbestos under the Federal Water Pollution Control Act, 33 U.S.C. $ 1251 et seq., as amended in 1972 and 1977. It is also considering additional regulation of asbestos in drinking water under the Safe Drinking Water Act 42 U.S.C. which is designed to eliminate nonessential asbestos exposures, and which requires the substitution of less hazardous and suitable alternatives where they exist" Asbestos regulations promulgated in the past by other agencies are as follows: CPSC--16 CFR Parts 1145,1304, and 1305: OSHA--29 CFR Part 1910; FDA21 CFR Parts 121,128,133, and 191; DOT--49 CFR Parts 170-189: MSHA--30 CFR Parts 55,57, and 71. 3006 et seq. Active Government Collaboration The Agency is developing a rule to require surveys to determine whether asbestos hazards are present in public schools because of deteriorating insulation. EPA Is also considering requiring appropriate corrective measures where it finds hazards (see 44 FR 54678, September 20,1979). Other existing asbestos sources that the Agency may control in the future include public buildings where asbestos was used as an Insulation or decorative material and merchant ships where asbestos is widely used as insulation. EPA regulations directed specifically to asbestos are found in 40 CFR Part 61 (air) and Parts 129 and 427 (water). External: EPA and CPSC both published ANPRMs on October 17,1979 in the Federal Register (44 FR 60053). These ANPRMs were prefaced by a Joint Statement of Cooperation signed by the EPA Administrator and the CPSC Chairman. The statement indicated how the two agendea will cooperate and To maximize the effectiveness of this proposed rule, EPA is coordinating either directly or through the Interagency Regulatory liaison Group (IRLG) with the Occupational Safety and Health Administration (OSHA), the Consumer Product Safety Commission (CPSC), the Food and Drug Administration (FDA), the Mine Safety and Health Administration (MSHA), and the Department of Transportation (DOT). In July, I960, EPA and the Consumer Product Safety Commission (CPSC) cooperated In sponsoring and organizing a 3-day workshop on substitutes for various uses of asbestos in commercial and industrial products. About 500 persons attended the workshop, which was designed to increase industry's awareness of substitutes for asbestos and to expand EPA's and CPSCs data base. EPA was the lead agency in coordinating the workshop. direct their regulatory efforts to Timetable minimize reporting requirements and other burdens on industry, and to improve overall public health. EPA is planning to promulgate a rule under S 8(a) of TSCA to require manufacturers and processors of asbestos fibers to submit economic and exposure information. EPA has proposed a rule under $ 8(d) of TSCA requiring industry to submit unpublished health and safety studies relating to asbestos. CPSC is NPRM--August 1981. Regulatory Analysis--Draft Regulatory Analysis, August 1981; final version, August 1982. Public Hearing--December 1981, Washington, DC. Public Comment Period--August 1981-December 1981. Final Rule--August 1982. Final Rule Effective--September 1982. planning to issue a general order Available Documents requiring manufacturers and private ANPRM for Asbestos-Containing labelers of some categories of consumer Materials in School Buildings, 44 FR products to submit information on the 54676, September 20,1979. use of asbestos in those products. CPSC ANPRM for Commercial and Industia! will not require the submission of Use of Asbestos Fibers, 44 FR 60058, information already submitted to EPA. October 17.1979. OSHA plans to lower its workplace Comment period extended, 44 FR standard for asbestos exposure (8-hour 73127. December 17,1979. time-weighted average) from 2 f/cc (fibers per cubic centimeter) to 0.1 f/cc. Agency Contact This action is in response to a Peter P. Principe, Chief Minerals recommendation in April 1980 by the Group (TS-778) joint National Institute for Occupational Office ofPesticides and Toxic Safety and Health (NIOSHJ-OSHA Substances Asbestos Work Group that "a new U.S. Environmental Protection Agency 401M Street S.W. Washington. DC 20460 (202)755-8023 LAM 001384 DPMC-17082 Federal Register / Vol. 45. No. 228 / Monday. November 24, 1980 / U.S. Regulatory Council 770U3 LAM 001385 CPSC Consumer Products Containing Asbestos (16 CFR Parts 1304* and 1305*) Legal Authority Consumer Product Safety Act, 15 U.S.C. S 2051 et seq.;. Federal Hazardous Substance Act, 15 U.S.C. 1281 et seq. Reason for Including This Entry Asbestos is a known human carcinogen used in a variety of products. The Consumer Product Safety Commission (CPSC) believes this to be an issue of great interest to thp public because of serious potential health hazards that may be involved when consumers are exposed to inhalable asbestos fibers. DPMC-17083 77884 Federal Register / Vol. 45. No. 228 / Monday, November 24, 1980 / U.S. Regulatory Council Statement of Problem The Consumer Product Safety Commission (CPSC) is concerned that the presence of asbestos in consumer products under certain conditions may present a risk of cancer and respiratory disease to consumers. On the basis of present information, it appears that consumer products containing asbestos fibers can pose a health hazard if the products release asbestos Fibers into the air which consumers can inhale. CPSC, therefore, issued an ANPRM on asbestos in October 1979. The primary purpose of CPSC issuing the ANPRM was to begin a formal investigation of the use of asbestos in consumer products by identifying consumer products containing asbestos, and to discuss ways CPSC could act to protect the public from exposure to asbestos fibers in consumer-products. CPSC could issue a standard or ban, concerning asbestos-containing products, require labeling of consumer products containing asbestos, encourage some form of voluntary action by industry, or take other action. The CPSC staff has recently completed a review of the health effects of asbestos which causes the staff to believe that, under certain conditions, the presence of asbestos in consumer products may present a risk of cancer and respiratory disease. The health hazard occurs when asbestos fibers are released into the air and people inhale them. Inhaled asbestos fibers may become embedded in lung tissue and once embedded, they may remain there indefinitely. Asbestos fibers that are . released from consumer products can remain in household air for long periods of time and may subject household members to a continuous risk of fiber inhalation. Consumer products are one source of exposure to asbestos fibers; there are also a number of environmental sources. Therefore, consumer products must be viewed as part of a cumulative burden of asbestos exposure. Asbestos released from consumer products poses several problems in the household. First, young children and infants are exposed. Second, asbestos fibers that consumer products release into the living space can remain there over long periods of time and may be subject to repeated cycles of settling and resuspension. The presence of asbestos fibers can thus pose an ongoing inhalation risk in the household. Third, unlike the workplace, where engineering control systems and protective clothing are available to minimize worker's exposure to asbestos, the home provides household members with little or no protection from exposure to asbestos \ fibers released from consumer products. We do not know exactly how many asbestos-containing products are available to the consumer; however, we estimate that hundreds of different types of consumer products contain asbestos in some form. Asbestos paper has been used in many consumer products, such as household appliances, as a thermal or electrical insulating barrier. Asbestos is also commonly used in household building products, such as roofing shingles and tile, to provide strength and stability. In a Calendar of Federal Regulations entry published in May, 198a the Commission stated its concern about consumer exposure to asbestos fibers. This Calendar statement on asbestos described an ANPRM issued in October, 1979 (44 FR 60057). The purpose of the ANPRM was to inform the public of the Commission's concern and to announce the initiation of a Commission investigation of asbestos in consumer products. The Commission is considering comments and information received in response to the ANPRM in determining regulatory options we might pursue. One example of CPSC action on products containing asbestos is hairdryers. As a result of information indicating that certain hairdryers released asbestos fibers during use. CPSC asked the National Institute for Occupational Safety and Health (NIOSH) of the Department of Health and Human Services to conduct tests. The results showed that some hairdryers released asbestos fibers into the air stream and directly on the user's head during ordinary use; thus, any fibers the hairdryers emitted could potentially be inhaled. As a result of negotiation between the Commission's staff and firms which share approximately 90 percent of the consumer hairdryer market, the firms agreed to cease production and distribution of hairdryers containing asbestos and to offer consumers some form of repair, replacement or refund for hairdryers they currently own. CPSC has approved a General Order to manufacturers (including importers) and private labelers of certain categories of consumer products to submit information on the use of asbestos in their products. The general order is currently undergoing review by the General Accounting Office for compliance with the Federal Reports Act. CPSC staff will examine the information in response to the order to help identify specific products containing asbestos, to determine how the asbestos is used in the products, and /Mr'.j *i to analyze the use of possible substitute materials in a variety of applications. The CP>C staff review of this information will also aid in evaluating the impact of possible regulation on the cost, availability, and utility of the products. The staff is concentrating its evaluation on certain types of products. We will focus initial action on products which show definite fiber release. We may make subsequent efforts to investigate other products which contain asbestos. As we acquire testing and product information from'the General Order and other sources identify other asbestos- containing products which may be of concern, we may institute other in-depth reporting requirements. Alternatives Under Consideration (A) On the basis of health research and economic studies, the Commission stated in its ANPRM that it may consider the elimination of non-essential uses of asbestos in those products from which fibers are released during reasonably foreseeable conditions of use or misuse. The Commission is considering two methods of accomplishing this: a generic approach, or a product-by-product approach. If the Commission chooses to use a generic approach, it could address in a single regulatory action the use of asbestos as a component in a number of different consumer products that share similar or related uses. In making its determination of whether or not to take action, the CPSC will consider detailed risk and economic findings. The CPSC will also take into account the function performed by the asbestos in the product the cost to industry and consumers of the regulations and the availability of substitutes for the asbestos and the safety of such substitutes. In cases in which we do not know the asbestos content and whether there is any fiber release, the staff will continue to test products for any asbestos fiber emission. Summary of Benefits Sectors Affected: General public. The primary benefit of asbestos regulations is to reduce consumer exposure to a know human carcinogen. Asbestos fiber inhalation has been linked with lung cancer, asbestosis, and mesothelioma (cancer of the pleura--the membranes surrounding the lung). These diseases can inflict pain and are often fatal. They may cause large financial burdens due to medical expenses that result. The CPSC believes that by reducing the release of asbestos from LAM 001386 DPMC-17084 Federal Register / Vol. 45, No. 228 / Monday. November 24.1980 / U.S. Regulatory Council 77885 consumer products it will help alleviate some of these unfortunate consequences. Summary of Costs Sectors Affected: Asbestos mining industry; and all manufacturers, wholesale and retail traders, and users of products containing asbestos. The CPSC estimates that some economic Impact may occur on industry in those cases where a mandatory regulation concerning asbestoscontaining products occurs. Current studies are now being made to determine potential costs to industry in developing substitutes for asbestos in consumer products. Related Regulations and Actions Internal: In 1977, the Consumer Product Safety Commission banned consumer patching compounds containing asbestos and artifical emberizing materials for fireplaces that contained respirable asbestos (16 CFR 1304 and 1305). External: The Environmental. Protection Agency (EPA) may shortly propose for comments a life-cycle reporting and recordkeeping requirement on asbestos. In September 1980, EPA published a corrective action program for school buildings containing asbestos. The Occupational Safety and Health Administration (OSHA), during spring .1980, published for comments a proposal for reducing occupational exposure to asbestos from 2 fibers per cubic centimeter to 100,000 fibers per cubic meter. Active Government Collaboration We have worked closely with the Environmental Protection Agency to ensure that our efforts to investigate and possibly regulate the use of asbestos will be coordinated, compatible, and nonduplicative. EPA simultaneously published an ANPRM in October 1979 which describes that agency's systematic effort to gather information on groups of asbestos products, and to evaluate risk from these products based on the "life cycle" concept In the life cycle analysis, the Agency examines cumulative risk from human exposure to asbestos from primary processing through end use and disposal. The CPSCs ANPRM describes an approach to the investigation of possible health risks that may be associated with the use of asbestos in a number of consumer products. Through close cooperation in our regulatory endeavors, EPA and CPSC hope to achieve the following three objectives: The first is to reduce significandy, through complementary actions, unreasonable human health risk from exposure to asbestos. The second is to reduce potential reporting burdens on industry by coordinating informationgathering activities. Third, to avoid inconsistent or needlessly burdensome regulations, we will develop regulatory actions that may result from these investigations in close consultation with each other. CPSC published, joindy with EPA, an ANPRM in the Federal Register of October 17.1979 (44 FR 60057) on consumer products containing asbestos. Comments on that ANPRM have been received and reviewed. Timetable General Order to Industry--End of 1980. Regulatory Analysis--The Commission, as an independent agency, is not required to prepare a Regulatory Analysis as defined under E.0.12044. However, the Commission prepares essentially the same information in its own ' rulemaking proceedings. Available Documents CPSC--Consumer Products Containing Asbestos; Advance Notice of Proposed Rulemaking--44 FR 60057, October 17,1979. Briefing Package of Comments on Advance Notice of Proposed Rulemaking, September, 1960 and briefing package on Petition to Ban Asbestos Paper, April, 198a 16 CFR 1304 and 1305: Ban on asbestos-containing patching compounds and emberizing materials, January, 1977. Copies are available from the Office of the Secretary, U.S. Consumer Product Safety Commission, 111118th Street, , N.W., Washington DC 20207. Agency Contact Rory Sean Fausett, Acting Program Manager Health Sciences U.S. Consumer Product Safety Commission Washington. DC 20207 (301) 492-8984 LAM 001387 DPMC-17085