Document Edd4OBoRy4ERz9VK9XG3E8Z7L
MANUFACTURING COMPANY, INC.
P.O. Box 371 De Pare, Wisconsin 54115 (414) 336-3717
February 15, 1984 HANDS-IN-BAG.
tm
ASBESTOS REMOVAL CHAMBER
Product Code
Product Description
Packed Approx. Per Case Case Weight
3VA21A JVA23A JVA25A JVA21R 3VA341
36" opening x 51" width x 58" length; 3 mil Polyethylene, one piece con struction-2 Hands Inside 24" opening x 39" width x 48" length; 3 mil Polyethylene, one piece con struction-2 Hands Inside 12" opening x 27" width x 30" length; 3 mil Polyethylene, one piece con struction-2 Hands Inside 36" x 51" x 58" 3 mil Polyethylene Latex Gloves Mounted 2 Hands Per Bag; Size 10 30" opening x 45" width x 58" length; 3 mil Polyethylene, one piece con struction, 4 Hands Inside
BURIAL BAGS
JVSC50-2 JVSC52-4
6 mil Polyethylene; labeled hazard disposal bag; 35" x 53" 2 mil Polyethylene; labeled hazard disposal bag; 24" x 30" bag
24 24 24 24 24
50 50
24 // 20// 16// 26// 24//
40// 14#
Suggested Industrial
Cost $ 14.00
12.50
11.00
15.00
14.00
92.40 18.00
UCC 003230
b. Turn on the vacuum to remove the air inside the v bag. Squeeze to shape the bag around the debris. As near the top as possible but below the vacuum
tube, twist the collapsed bag and tape tightly to form
a seal keeping the debris in the bottom of the bag.
D. To perform the task, insert your hands and arms into the Hands In BagTM. With the necessary equipment (already in the bag) remove the asbestos from the work area and gently collect the debris in the bottom of the bag.
F. Remove the entire bag by slitting the bag above the pipe with a cutting blade.
6. Place the bag containing the asbestos debris in the other bag provided that also has a Hazard warning label on. Seal tightly with the provided twist tie or tape tightly. Mark the Hazard label as required by Local, State and Federal regulations.
H. Dispose of according to Local, State and Federal regulations. Hazard disposal 6 mil. Potyethene bag fits 55 gallon drum. Holds several fitted asbestos removal bags.
Cut off and put in disposal bag
For Bigger Valves & Pipes Seal Open End & Open The Wide End Of Bag & Follow Above Procedures.
.Vacuum Hose
(C
Debris Inside Airtight Bag
Twist and Tape Tightly
E. When the job has been completed:
a. Remove one hand. Using the hand remaining in the bag, lift the tools up near the top so the hand outside the bag can grasp the tools from the outside. Remove other hand.
SPECIFICATIONS
CAUTION: HAZARDOUS
WASTE ASBESTOS
FIBER
Do not breathe dust!
Hazard Bag
Black on yellow 6 mil.
JVSC50-2
HAS GLOVE RINGS WITH ATTACHED LATEX GLOVES
Product Code
Product Descri ption
Opening
Width
Length
Packed
Suggested
Per Case Consumer Price
JVA21A JVA41A JVSC50-2
36" X 51" X 58" 30" X 45" X 58" Hazard Bag 6 Mil. 36" x 60"
2 hands 4 hands
24 24 50
WARNING: The
vacuum unit used should have a filter system with an efficiency of 99.95 at .3 microns or better. Proper disposal of the filters is in order. Refer to Local, State and Federal regulations.
AH information, recommendations and suggestions appealing herein concerning these products ars based upon tests and data believed to be rebabl*. However, it is the user's responsibility to detemvne the safety, toxicity and suitability for his own use of the product described herein. Smee the actual use by others ts beyond our control, no guarantee, expressed or implied, is made by J. V. Manufacturing Com pany. Inc., as to the effects of such use. the results to be obtained or the safety and toxicity of the product nor does J. V. Manufacturing Company, Inc., assume any tiatnhty arising out ot use by others of the prod uct referred to herein. Nor is the information herein to be construed as absolutely complete since addi tional information may be necessary or desirable wfien particular or exceptional conditions or circum stances exist or because of applicable laws or government regulations. Nothing harem contained is to be construed as permission or as a recommendation to infringe any potent
UCC 003232
DISTRIBUTED BY:
ARG-DRIand Hands In BagTM are trademarks of J. V. Mtg. Co., Inc.
Manufactured by J. V. Mtg. Co., Inc., P.0. Box 371, Oe Pere, Wis. 54115 Tel. 414-336-3717
Other products mfg. by J.V. Mtg. Co., Inc.: ARG-DRITM - Universal Sorbent ARG-DRI TM - J.V. Oil Sorbent ARG-DRITM - j.v. Liquid Sorbent Hands In BagTM - Atmospheric Chambers.