Document EKXQG83vvYYGkGg67oK96ygj

LESSON TWO-DEMONSTRATION 2 MACHINING 6. Clean any corrosion from the hub using a die grinder with a Scotch Brite surface conditioning disc. Does not apply to vehicles with one-piece rotor assemblies. 7. Clean any corrosion from the rotor mounting surfaces using a die grinder with a Scotch Brite surface conditioning disc. Rotor-to-hub surface (does not apply to vehicles with one-piece assemblies). Rotor-to-wheel surface. Do not use equipment that will remove metal from mounting surfaces. 8. Reinstall the rotor on the vehicle. Use the marks on rotor and wheel stud to maintain match mounting. 84 September, 2005 Brake System Diagnosis and Repair