Document Dvr35vrxVxkj9jr3DYKENk7G4

N Subpart G--Signs, Signal*, ond lahle 0.1 Barricades S ltMJOl Accident prevention lien* V { @ {4 wdkp. ' ""N) (a) General. Signs end symbols re quired by this lubpsrt shell be risible st Honor cunzoi OTTcrosmt ell times when work is bein* performed, end shall be removed or covered promptly *QPEBlTg so KC/X USB when the hazards no looter exist. <b) Danger signs. (li Danger signs (see Figure 0-1) shall be used only where an Immediate hazard exists. (2) Danger signs shall have red as the predominating color for the um>er panel; black outline on the borders; and a white lower panel tor additional sign wording. <c) Caution signs. (1) Caution signs ' (see Figure 0-2) shall be used only to warn against potential hazards or to caution against unsafe practices. (2) Caution signs shall have yellow as the predominating color; black upper panel and borders; yellow lettering of "caution" on the black panel; and the feite tag - tBilte letters on red squire White tagMiite letters oa rad -oval with a black square Tallow tag- Tellov letters on a black back- ground ' White tag -- White letters on black bacloground lower yellow panel for additional sign wording. Black lettering shall be used (or additional wording. S' Basie Stock Safaty Colors Copy Specification 1 Figure S-t (Background) (Ink) (letters) felts Bed - Bo Hot Operate felt* Black, and Bed % Danger 4 Tallow Black * feita -' Black- Out of Order Do Mot Use (1) Additional rules. American Na (b)' Crane and hoist signals. Regula tional Standards Institute (ANSI) Z35.1- tions for crone and hoist signaling will 1268, Specifications tor Accident Preven be found In applicable American Na (d) Exit tigns. Exit signs, when re quired. shall be lettered in legible red tion Signs, and Z35.2-19G8, Specifications for Accident Prevention Tags, contain tional Standards Institute standards. letters, not less than 8 Inches high, on a rules which are additional to the rules S 1926.202 narrieade*. .white fleld and the principal stroke of ' prescribed in this section. The employer the letters shall be at least three-fourths shall comply with ANSI Z35.1-1968 and inch In width. Z35.2-1868 with respect to rules not spe (e> Sa/ety instruction sign*. Safety cifically prescribed in this subpart. instruction signs, when used, shall be white with green upper panel with white 11926401 Slgnalbtg. Barricades for protection of employees shall conform to the portions of the American National Standards Institute D6.1-1971, Manual on Uniform Traffic Control Devices for Streets and High letters to convey the principal message. Any additional warding on the sign shall (a) Flagmen. (1) When operations art such that signs, signals, and barricades ways, relating to barricades. be black letters on the white background do not provide the necessary protection | 1926.203 Definition* applicable to this '[) Directional signs. Directional on or adjacent to a highway or street, Subpart. signs, other than automotive tragic signs specified in paragraph <g) of this section, shall be white with a black panel and a white directional symbol. Any flagmen or other appropriate traffic controls shall be provided. (2) Signaling_ directions by flagmen shall conform to American National (a) "Barrlead*" metns an obstruction to deter tha passage of persons or vehicles. . additional wording oa the sign shall be Standards Institute DO.1-1871, Manual (b) "Sign*' are ths warnings of black letters on the wStits background. (g) Tragic lions. <l> Construction area* shall be posted with legible traffic signs at pointa of haaant. (2) All traffia cuwtrst signs or device* on Uniform Traffic Control Devices for Streets and Highway*. (]> Hand signaling by flagmen shall be by use of red flags at least 18 Inches hazard, temporarily or permanently affixed or placed, at locations where hazards exist. - (e> "Signals'* ars moving signs, pro 1 used for protection of construction work square or sign paddles, and In periods of vided by worker*, such as flagmen, or by men shall conform to American National darkness, red lights. devices, such as flashing lights, to warn Standards Institute DS.1-1971, Manual (4) Flagmen shall be provided with of possible or existing hazards. on Uniform Traffic Control Devices for Streets and Highways. ' (h) Accident prevention tags. (1) Acel- dent prevention tags shall be used as a temporary metru of warning employees and shall wear a red or orange warning garment while flagging. Warning gar menta worn at night shall be of reflec- tOCiZed material (d) "Tags* ars temporary signs, usually attached to a piece of equipment or part of a structure, to warn of existing or immoAutn hazards. of an existing hnJ_-.nl, such as defective tools, equipment, etc. They shall not be used in place of, or aa a substitute far, accident prevention signs. 77 -- 00003 (2) Specifications for accident preven- uoo tags similar to thcae la Table 0-1 shall apply. ' ttetsm. vot. jy, mo. m--Monday, mi is, ivts