Document DmqywXVk7yN2bx5yYV3N5mmM

Air System Equipment.c'ndSSf*SuiW ficmE inousiRiEs, me. JACKSON, MICHIGAN, U.S.A. Continuously serving the air conditioning and refrigeration industry since 1919 34 years experience stands behind these ACME products Since 1919 Acme has been building units to serve the air conditioning and re frigeration field. They have experi mented with thousands of models and installations. On-the-job service has alwayB been the basing point for any Acme design changes. Today, Acme has a complete line of commercial refrigera tion and air conditioning equipment-- the end result of 34 years effort. You gain all this experience for yourself and your customer simply by specifying Acme on your installations. THE FLOW-COLD LINE The Flow-Cold is a factory assembled and tested packaged liquid chiller de signed for use in industrial process temperature control and air condition ing. Used as-a heat pump and installed with the Flow-Temp Remote Room Conditioner it provides both heating and cooling. ACME DRY-EX WATER CHILLERS For cooling water, brines, and other fluids by direct expansion of the re frigerant. Capacities from 5 to 260 tons. EVAPORATIVE CONDENSERS and COOLING TOWERS Solid, sturdy, dependable. All. fabri cated steel parts are hot-dip galvanized after fabrication assuring long life. Prime surface coils or specially designed Acme packs for Freon or Ammonia in stallation. Capacities from 4 to 130 tons. FREON and AMMONIA CONDENSERS The standard of the industry. Enough production combinations to assure you of the most efficient operation available. Capacities from 3^ to 700 tons. Write for catalogs and more Information on any ACME product. HEAT EXCHANGERS, LIQUID RECEIVERS, OIL SEPARATORS Freon suctiob and liquid line heat ex* changers with capacities from 3 to 200 tons; more than 70 standard sizes of liquid receivers for Freon, Ammonia or other refrigerants; and a complete line of Freon or Ammonia Oil Sepa* rators for to 100 ton systems- 1300 Air System Equipment Heat Transfer Surface A tropin Corporation 410 So. Geddes Street Syracuse 1, N. Y. Aerofin Standardized Light-weight Heat Exchange Surface There is a factory-trained Aerofin application and service engineer located near you to give you prompt service. Write, wire or phone the factory. Aerofin is the modern Standardized Light-Weight Encased Fan System Heat ing and Cooling Surface originated by. Fan Engineers to meet the present and future requirements of this highly specialized field. All Standard Aebofin Units are furnished as completely en cased Units, ready for pipe and duct connections. The patented casings are built of pressed steel and are exception ally strong and rigid, protecting the Unit from all the strains of pipe, connections and expansion or contraction in service. The casings are flanged on both faces, top and bottom, and template punched for bolting together adjacent Units, or for duct connection. units or for installing in ducts. May be installed either horizontally or vertically. Used on any two-pipe steam system for preheating or reheating. Modulating control on preheaters. Available in 13 lengths and 3 widths, from net face area of 2.76 sq ft to 26.28 sq ft. Fig. t Flexltube Aerofin (Fig. 2) is distin guished from all other developments by its off-set tubes, so arranged as to absorb all expansion and contraction strains. Headers--Steel. . Tubing--% in. O.D. copper, admiralty or aluminum. Joints--Where admiralty or copper tubes are used together with bronze or steel headere tubes are brazed to headers. Where both aluminum tubes and headers are used tubing is welded to headers. Casings--Copper, aluminum or galvan ized iron. Design--Constructed,with headers on Aerofin Non-freeze heater (Fig. 1) is opposite ends making possible installa non-freeze, non-stratifying spiral fin coil tion of units with tubes horizontal or U1lt into easing for air conditioning vertical. 1301