Document DDRe3rJoBwLR8bYQRNNJ50k1d

ccj V. J, Labrecque W. J. Sheehan-"'" J. F. PrindiviUe R. H. Bates L. W. Winchester M. H. Kapps F. Villegas C. Nielsen October 2, 1967 To: J. F. Feldmann From: J. C. Toman SUBJECT: VICTOPAC lit re: Samples for Caterpillar #1S 67k Please refer to your note of August 22, 1967, on this subject. Enclosed you will find the following: 5 pieces Victopac lit, 8-1/2'' x 11" x .031" (grain direction stamped) 5 pieces Victopac lU, 8-1/2" x 11" x .062" (grain direction stamped) This is in accordance with the specific requirements of paragraph VT-B of #15 67U covering material qualification. These samples were prepared from our production run of last week as per our revised Formula #828 and Factory Standard #302, incorporating tolerances agreed to by all parties concerned (Raw Material Inspection, Production, and Materials Development Laboratory). On the basis of this run, it was agreed that the Standard and the tolerances are within the manufacturing capabil ity of the Victopac process and equipment. Materials Development Laboratory $ C, J. C. Toman pt VPD-91-0002396 DANA-086