Document BybEQbZ9VvG0EzzE6geGzDX6X

T7 J, A ' ____________ 1 a \\ hydraulic brakes variable braking provides the uitimate in stopping control FIVE WHEEL SIZES AVAILABLE: 8", 10", 13". 16" & 19" Hydraulic brakes give operators complete control of speed at which load is moving -- thus increasing effi ciency and improving safety. With the Type 506 Elec tro Hydraulic Brake the electrical system holds the brake released, and the pedal-operated hydraulic sys tem enables controlled variable pressure braking for slowing and stopping functions. Type 509 is hydraulic only, depending on spring tension to hold the brake released. The hydraulic systems in both models oper ate the same as the braking system of an automobile -- the more pressure applied to the pedal, the greater the braking torque. Both systems operate over the full range of speeds. C-H hydraulic brakes comply with NEMA-AISE stan dards. Eight out of ten parts are interchangeable with mechanical brakes to considerably reduce parts inven tory requirements for users of both mechanical and hydraulic systems. optional power assist accessory This new device enables the use of hydraulic braking power on as many as four brakes simultaneously from a single control station. What's more, control may come from any remote source such as a footswitch, pendant station or radio control transmitter. The pow er assist greatly increases braking efficiency on many applications and reduces operator fatigue. CUTLER-HAMMER INDUSTRIAL SYSTEMS DIVISION. MOwtuket. Wit. 53201