Document By2d2wZB6BVn9K5pR0eyx1EO4

FRONT AXLE Figure 42 11 Assemble new wheel bearing grease seal. Tools--#D-155 Installer, #C-4171 Handle. Figure 44 ,OOM< Assemble drive gear and snap ring. Assemble bolt into shaft. Pull on bolt, push on gear to allow clearance of the snap ring groove. Be sure snap ring is seated in snap ring groove. 40 DEGREE STEERINTERNAL HUBS WITH DISC BRAKES DISASSEMBLY Figure 43 ioot Assemble brake drum and outer wheel bearing eone to spindle. Assemble inner wheel bearing adjusting nut. Torque nut to 50 lbs. ft. Rotate hub, then back off nut 90" maximum. Assemble lockwasher, line tap up with keyway of spindle, ^nnut to nearest hole of the lockwasher. As semble outer locknut. Torque nut to 50 lbs. ft. minimum. Tool--#C-4170 Wheel bearing wrench. Remove both brake caliper assembly bolts. 15