Document BRmJOR843wZj1p0YkN2pZJVLm

use for Table 1, Comparison of required property values for cables for industrial and transportation equipment in various applications Required characteristics Embrittlement test at low Long-term heat resistance temperature Tensile strength Tensile elongation Oil resistance Flexural modulus Wire harnesses for automotive Precision sensor cables for fuel Motor lead wires Power cable for ship Cooking Appliances (microwave ovens, refrigerators, etc.) Wires for equipment for ironworks >200 >200 >200 >200 >200 >200 <-40 <-40 <-40 <-40 <-40 <-40 Mpa >10 >10 >10 >10 >10 >10 % >200 >150 >200 >150 >200 >200 JIS No.2 oil (ASTM No.2) 85C, 80% residual Gasoline 40C, 85% residual JIS No.2 oil (ASTM No.2) 120C, 80% residual Mpa <100 <100 <100 <100 <100 <100 Servo motors >200 <-40 >10 >150 <100 Motors for inverter >200 <-40 >10 >150 <100 Spindle motors >200 <-40 >10 >150 <100 Power cables for elevator >200 <-40 >10 >150 <100 Dielectric breakdown voltage of AC kV/mm >15 >15 >15 >15 >20 >20 >20 >20 >20 >20 Extrusion molding temperature <240 <240 <240 <240 <240 <240 <240 <240 <240 <240 Material Fluoro Rubber PEEK EPDM Silicone rubber Mica Soft vinyl chloride compound Soft heat-resistant vinyl chloride compound PE (polyethylene terephthalate) XLPE Ceramic base Polyamide Polyimide Table 2, Comparison of properties of fluoroelastomers and other alternative materials Embrittlement test at low Long-term heat resistance temperature Tensile strength Mpa Characteristics Tensile elongation Oil resistance % 200 -50 15 300 Good 260 100 100 Good 150 -60 15 400 Bad 180 -90 8 400 Bad Bad Good 60 -30 15 300 Bad 105 -30 15 300 Bad 75 -70 20 1,000 Bad 90 -70 20 800 Bad Bad Good 120 -60 30 500 Bad 260 18 70 Good Flexural modulus Mpa 100 4,200 100 100 400 400 400 7,980 Dielectric breakdown voltage of AC kV/mm 30 18 20 20 20 40 40 0 Extrusion molding temperature 80 450 100 25 Bad 170 170 120 120 Bad 260 450