Document B8Mkz9xBoVJO8KjjjdGnz3Gkw

Gleason 950 specifications pinion O.D. (max.) ..................... Pitch diameter of mate (max.)... Cone distance (max.)................. Whole depth ............................... Face width................................... Tooth numbers........................... Ratio Range................................. English 7.000" 10.500" 5.250" .750" 1.750" 6-25 1.9-6 Metric 177.8 mm 266.7 mm 133.3 mm 19 mm 44.5 mm MACHINE CAPACITY Tilt angle ................................... Root angle................................. Machine offset ......................... Sliding base: advance ............. withdraw ............ Radial (max.)............................. 40" -12" to +12" 3.250" 1.000" 2.500" 5.000" 82.6 mm 25.4 mm 63.5 mm 127 mm WORK SPINDLE Diameter of tapered hole at large end.... Taper per foot........................... Depth of taper........................... 3'%," 6" NOTE: Arbor equipment for the Production Center is not interchangeable with that for prior machinery. SPEEDS AND FEEDS Cutting speeds (maximum) .... Feed (fastest) ........................... 600 SFPM 3.5 sec/tooth CUTTERS HARDAC II and WEDG-AC .... 5,6, Vh and 9" 3Vi" and 4'/i" with adapter ELECTRICAL EQUIPMENT Hydraulic motors (2).............. Scavenger motors (2)........... Coolant motors (3)............... Rougher cutter motors (2) ... Finisher cutter motors (2 precision dynamic balanced) ........................... Servo pump drive motors (4). 5 H.P. 1 H.P. 1 H.P. 5 H.P. 3 H.P. 3 H.P. 60 Cycle 1800 rpm 1800 rpm 1800 rpm 1200 rpm 1800 rpm 1800 rpm 50 Cycle 1500 rpm 1500 rpm 1500 rpm 1000 rpm 1500 rpm 1500 rpm MISCELLANEOUS Floor space for complete No. 950-- including Rougher, Finisher, electrical control boxes and automatic part handling system.......... Approx, weight (net............... Approx, weight (gross).......... 233" x 255" 115,000 lbs. 126,000 lbs. 592 x 648 cm 52164 Kg. 57152 Kg. STANDARD EQUIPMENT (1) No. 615 Hypoid Pinion Rougher (Double Cradle) (1) No. 616 Hypoid Pinion Finisher (Double Cradle) Automatic loading and unloading, slock dividing and transfer from roughing section to finishing section Storage bank between roughing and finishing sections Chamfering device Screw-type chip conveyors (2) with magnetic chip separators (2)* Power amplifiers (4) Automatic Production Counters (2) Complete set of cams for one part Necessary belts, pulleys and gears for index, ratio of roll, cradle roll, and speed for one automotive pinion Hydraulic chucking including drawrods on all four workheads Work spindle bores 3"/32'' x taper Ratio control roughing on No. 615 Complete electrical equipment including installation for 3 phase, 50 or 60 cycle, alternating current Allowance for omission of magnetic chip separators-for central system EXTRA EQUIPMENT Cutter length fixture Cutter proof fixture Size and depth control fixture (dinging ball fixture) One set of belts and pulleys to arrange each machine for one additional speed One set of change gears to arrange machine for a different pinion One set of parts to arrange automatic loader for a different pinion Additional cams Roughing feed cams (2) Finishing feed cams (2) Roughing roll cams (2) Finishing roll cams (2) Index cams (4) Clamp on/off cam (1) Ratio control set-over cam (1) Cutter lifting bail Set of installation rollers Load magazine Unload magazine 12 GLEASON-000205