Document B8B5666Be563z8zG0ZNrwDb1j

DownloadSearchable PDFRandom document
Service Manual EA-40 June 1984 15,16,17,18, 22, 23, 26, 30, 35 Series 2-Speed and Planetary Double Reduction Axles Eaton Axles & Brakes Axle and Carrier Assembly Model Identification Differential carrier identification is either stamped on the carrier itself or on a metal tag affixed to the carrier. Location on the carrier is the same. Eaton'AxJe f :TN MOOEL HEAD SPEC. RATIO DATE COOf O COST PART NO Metal Tag on Differential Carrier ______ 15201 I sign Lml Our Size 2-SpMd Axte 8*riet Planetary Double Reduction Model No. Change third digit "2" to "3" Example: 15301 Axle Specification Number-------- The complete axle is identified by the specification number stamped on the rear right-hand side of the axle housing. This number identifies all component parts of the axle as built by Eaton, including special OEM requirements such as yoke or flange. In addition, some axles may include a metal identification tag (see illustration). F:T'N HStHlOWl use Of Sesial No Las Ring Gear and Pinion Identification Ring Gear and Drive Pinion are matched parts and must be replaced in sets. Check the appro priate Eaton Axle parts book for part numbers and ordering instructions. To aid in identifying gear sets, both parts are stamped with such information as number of pinion and ring gear teeth, individual part number and matched set number (refer to adjacent drawing). COMPLETE AXLE SPECIFICATION NO. 3 Axle and Carrier Assembly Model Identification Differential carrier identification is either stamped on the carrier itself or on a metal tag affixed to the carrier. Location on the carrier is the same. Eaton0Axle F:T*N MODEL HEAD SPEC. O RATIO DATE COOE o CUST PART NO v Metal Tag on Differential Carrier 15201 TTTI Design Level Gear Size 2-Speed Axle Series Planetary Double Reduction Model No. Change third digit "2" to "3" Example: 15301 Axle Specification Number-------- The complete axle is identified by the specification number stamped on the rear right-hand side of the axle housing. This number identifies all component parts of the axle as built by Eaton, including special OEM requirements such as yoke or flange. In addition, some axles may include a metal identification tag (see illustration). F:T'N Pt No Hsg Model Hsg Cap Serial No Lbs