Document B5XVZQgkM6MVBgZNyVvmgYpjw

Combining: Dept. 19 Recalendering: Dept. 01 Blanking: Coating: Dept. 17 Inspection: Page 2 FACTORY STANDARD #311 October 21, 1963 The assembled sheets of five layers are combined on Machine #2913, using induction heating with an output of 50%, to a final gauge of .060"/.065" with an aim gauge of .062". The combined sheets are recalendered to .055"/ .060" on the three roll rubber calender (Machine #1433). As per Analysis Card. The blanked gaskets' are roller coated with Ma terial #6 using the Francis two roll coater and dried in the #5 or #6 Precote Oven. The final gauge after coating of the gaskets should be .055"/.060". The gaskets should be inspected for Analysis Card requirements. Materials Development Laboratory Compiled by: Sj. Larsen /' / Approved by: 1 ,/ f^.w\LASls... V. Labrecque Copies to: B. R. Basile R. M. Burns J. R. Derpack F. Friauff M. F. Hill C. H. King S. M. Lillis R. S. McGranahaa P. F. Niessen E. Novak . F. A. Robbins A. R. Smith Engr. Service Industrial Engr. Inspection Dept. Material Control Quality Control Dept. 01 Dept. 05 Dept. 06 Dept. 17 Dept. 19