Document 9JDj8dZRRexLvj1o8DXVY81OL
NEW Formula V-972 October 30, 1979
MILFORD, VIRGINIA, PLANT FORMULA READY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
Pyrophylite-SK Limestone Methocel 240 PMA-30 Aqua-Fil K-8 C-9-136 Starch DuPont JCM Water *
Function
RM Spec
Bulking Agent Filler Water Retention Preservative Bulking Agent Adhesive Adhesive Solvent
1 13 163 --
229 10
185 --
Percent
7.289 83.677
.340 .044 3.450 .875 4.325
--
Lbs/Batch
150.00 1722.00
7.00 .91
71.00 18.00 89.00 1026.00
(10.0 gal) (124 gal)
100.000
3083.91 **
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
U>o
- Blend ingredients in following order:
1) Water/PMA2) JCM 3) Filler 4) Mix until REady Mix is snooth - pumping
viscosity should be 520 : 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (520 + 20) pH
For machine tools, add 4 gallons H-0 (470 + 20).
Minimum - 8,0
Maximum - 9.0 (24 hrs)
Continued on Page 2 ..........................
SGP 0017577
October 30, 1979 Formula V-972 NEW Page 2
WORKING PROPERTIES Specifications
BONDING PROPERTIES Specifications
CRACK RESISTANCE Specifications
COLOR Specifications
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working and free of any coarse, gritty and undis persed particles. Material shall be free from lumps due to incomplete mixing.
- Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall show at least 90% fiber tear when delaminated.
Refer to Plant Testing Procedure No. 37. Rating shall be 4 or better.
White Dried compound shall match color of standard sample.
HCF-ps
SGP 0017578
September 23, 1980 Supersedes Formula V-972 dated 10/30/79
MILFORD, VIRGINIA, PLANT FORMULA READY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
Pyrophylite-SK Limestone Methocel 240
/ Proxel CRL
Aqua-Fil K-8 C-9-136 Starch DuPont JCM Water *
Function
RM Spec
Bulking Agent Filler Water Retention Preservative Bulking Agent Adhesive Adhesive Solvent
1 13 163 --
229 10
185
Percent
7.288 83.652
.340 .074 3.449 .874 4.323
Lbs/Batch
150.00 1722.00
7.00 1.52
71.00 18.00 89.00 1024.48
(10.0 gal (124 gal)
100.000
3083.00. **
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order: 1) Water/PMA-30 2) JCM 3) Filler 4) Mix until Ready Mix is smooth - pumping
viscosity should be 520 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (520 + 20) pH
For machine tools, add 4 gallons H_0 (470 + 20).
Minimum - 8.0
Maximum - 9.0 (24 hrs)
-/ denotes change
Continued on Page 2
SGP 0017579
September 24, 1980 Supersedes Formula V-972 dated 9/23/80'
MILFORD, VIRGINIA, PLANT FORMULA REAPY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
Pyrophylite-SK Limestone Methocel 240 Proxel CRL Agua-Fil K-8 C-9-136 Starch DuPont JCM Water *
Function
RM Spec
Bulking Agent Filler Water Retention Preservative Bulking Agent Adhesive Adhesive Solvent
.1 13
163 --
229
10 185
--
Percent
7.284 83.620
.340 .112 3.448 .874 4.322 ----
Lbs/Batch
150.00 1722.00
7.00
2.31 71.00 18.00 89.00 1023.69
(10.0 gal] (124 gal)
100.000
3083.00. **
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order: 1) Water/PMA-30 2) JCM 3) Filler 4) Mix until Ready Mix is smooth - pumping
viscosity should be 520 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (520 + 20) pH
For machine tools, add 4 gallons H_0 (470 + 20) .
Minimum - 8.0
Maximum - 9.0 (24 hrs)
-/ denotes change BGR:p
Continued on Page 2 .... .
SGP 0017580
April 20, 1981
Supersedes Formula V-972 dated 9/24/80
MILFORD, VIRGINIA, PLANT FORMULA READY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
"/ Pyrophylite-SK "/ Limestone
Methocel 240 -/ Proxel CRL
Agua-Fil K-8 C-9-136 Starch -/ DuPont JCM -/ Water *
Function
RM Spec
Bulking Agent Filler Water Retention Preservative Bulking Agent Adhesive Adhesive Solvent
1 13 163 -- 229 10 185
--~
Percent
7.285
83.638 .340 .092
3.448 .874
4.323 ----
Lbs/Batch
150.00 1722.00
7.00
1.90 71.00 18.00 89.00 1024.10
(10.0 gal) (124 gal)
100.000
3083.00. **
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at .62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
- Blend ingredients in following order: 1) Water/PMA-3 0 2) JCM 3) Filler
-/ 4) Mix until Ready Mix is smooth - pumping viscosity should be 550 + 20.
WORKING CONSISTENCY
Specifications for Paste
- Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (550 + 20) pH
For machine tools, add 4 gallons H_0 (420 + 20) .
Minimum - 8,0
Maximum - 9.0 (24 hrs)
-/ denotes change BGR:ps
Continued on Page 2 .
SGP 0017581
September 17, 1981
'
Supersedes Formula V-972
dated 4/20/81
MILFORD, VIRGINIA, PLANT FORMULA READY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
Pyrophylite-SK Limestone Methocel 240 Proxel CRL Aqua-Fil K-8 C-9-136 Starch DuPont JCM Water *
Function
RM Spec
Bulking Agent Filler Water Retention Preservative Bulking Agent Adhesive Adhesive Solvent
1 13 163 --
229 10
185
Percent
7.283 83.603
.340 . 133 3.447 .874 4.320 ----
Lbs/Batch
150.00 1722.00
7.00
2.73 71.00 18.00 89.00 1023.27
(10.0 gal) (124 gal)
100.000
3083.00. * *
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at 62 lbs/pail.
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in following order: 1) Water/PMA-30 2) JCM 3) Filler 4) Mix until Ready Mix is smooth - pumping
viscosity should be 550 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (5 50 + 20) pH
For machine tools, add 4 gallons H_0 (420 + 20) .
Minimum - 8.0
Maximum - 9.0 (24 hrs)
-/ denotes change BGR:pg
Continued on Page 2
SGP 0017582
October 2, 1981 Supersedes Formula V-972 dated 6/17/81
MILFORD, VIRGINIA, PLANT FORMULA READY MIX TOPPING COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT - White Ready Mix Topping Compound used for finishing joints and spotting nail heads.
FORMULA
Raw Material
Pyrophylite-SK Limestone Methocel 240 Proxel CRL *** Aqua-Fil K-8 C-9-136 Starch DuPont JCM Water *
Fur ction
RM Spec
Bulking Agent Filler Water Retention
Preservative Bu:king Agent Adhesive Adhesive
Solvent
1 13 153 --
229 10
185
Percent
7.283 83.603
.340 .133 3.447 .874 4.320
Lbs/Batch
150.00 1722.00
7.00
2.73 71.00 18.00 89.00 1023.27
(10.0 gal) (124 gal)
100.000
3083.00. **
* Approximately 52 lbs/100 lbs of active ingredients (This may vary + 8 gallons per batch.
** One batch yields 49 five-gallon pails Ready Mix Joint Compound at
62 lbs/pail. *** Nuosept 95, at a loading of 9 lbs/batch, may be substituted for Proxel
CRL.
-SPECIAL MIXING INSTRUCTIONS:
Blend ingredients in following order:
1) Water/Proxel CRL 2) JCM 3) Filler 4) Mix until Ready Mix is smooth - pumping
viscosity should be 550 + 20.
WORKING CONSISTENCY
Specifications for Paste
Refer to Plant Testing Procedure No. 32.
If paste is not proper working consistency, a maximum of 5 cc water per 150 grams of paste may be added to adjust.
Brabender (5 50 + 20) pH
For machine tools, add"4 gallons H_0 (420 + 20) .
Minimum - 8.0
Maximum - 9.0 (24 hrs)
-/ denotes change BGR:p$
Continued on Page 2 .
SGP 0017583
April 26, 1982 FORMULA V-972 NEW
MILFORD, VIRGINIA, PLANT FORMULA READY MIX JOINT COMPOUND V-97 2 (HA1ND TOOLS)
-/ DESCRIPTION OF PRODUCT
- White Ready Mix Joint Compound used for taping, topping and texturing. For selected market trials only.
FORMULA:
Raw Material
Filler DuPont JCM Nuosept 95 Water * MD-76 ***
Function
RM Spec
Filler Adhesive Preservati ve Solvent Defoamer
185 12 9
195
Percent 95.08 4.41 .42
.09
Lbs./Batch
2050.0 95.0 (10.7 gals 9.0
994.0 (119.8 gal 2.0 _
3150.0 **"
* Approximately 48 lbs/100 lbs. of active ingredients (this may vary + 6 gallons per- batch) .
* * Or.e batch yields 50 + 1 five-gallon pail Ready Mix Joint Compound at 62 Ibs/batch.
* * * Nalco 71-D5 can be; substituted at eoual loadinc
SPECIAL MIXING INSTRUCTIONS
Blend ingredients in fallowing order:
1) Water / Nuosept 95. 2) J CM -/ 3) Defearner MD-76 -/ 4) Filler Y-973 5) Mix until Ready Mix is smooth
pumping viscosity should be 540 + 20.
continued on race 2 HCFids
SGP 0017584
/
J/
April 26, 1982 NEW FORMULA V-972 Page 2
WORKING CONSISTENCY Specifications for Paste Brabender (540 + 20) dH
WORKING PROPERTIES
BONDING PROPERTIES
CRACK RESISTANCE
COLOR Specification
Refer to Plant Testing Procedure No. 32. If paste is not proper working consistency a maximum of 5 cc water per 150 grams of paste may be added to adjust.
For machine tools add 4 gallons H20 (450 + 20).
7.0 - 8.5
- Refer to Plant Testing Procedure No. 33. Compound shall be plastic, buttery working, and free of any coarse, gritty or undispersed particles. Material shall be free from lumps due to incomplete mixing.
Refer to Plant Testing Procedure No. 35. After compound has dreid, tape shall show at least 90% fiber tear when delaminated.
Refer to Plant Testing Procedure no. 37.
Rating shall be 4 or better.
White Dried compound shall match color of standard sample.
HCF: ps
SGP 0017585
June 11, 1982 Supersedes FORMULA V-972
dated 4/26/82
MILFORD, VIRGINIA, PLANT FORMULA READY MIX JOINT COMPOUND V-972 (HAND TOOLS)
DESCRIPTION OF PRODUCT
- White Ready Mix Joint Compound used for taping, topping and texturing.
FORMULA:
Raw Material
Filler DuPont JCM Nuosept 95 Water * MD-76 ***
Function
RM Spec
Filler
Adhesive Preservative Solvent Defoamer
185 129
195
Percent
95.08 4.41 .42
.09
Lbs./Batch
2050.0 95.0 (10.7 gals.) 9.0
994.0 (119.8 gals. 2.0 _
3150.0 **"
* Approximately 48 lbs/100 lbs. of active ingredients (this may vary + 6 gallons per-batch).
** One batch yields 50+1 five-gallon pail Ready Mix Joint Compound at 62 lbs/batch. * Nalco 71-D5 can be substituted at equal loading.
SPECIAL MIXING INSTRUCTIONS - Blend ingredients in following 1 order:
1) Water / Nuosept 95. 2) JCM 3) Defoamer MD-76 4) Filler V-973 5) Mix until Ready Mix is smooth --
pumping viscosity should be 540 + 20.
(continued on page 2
HCF:PS
)
SGP 0017586