Document 99ad5kXEjnq9KmQ44GejKyLLq

i - Air System Equipment s,Iltat~ ACME INDUSTRIES, INC. Jackson, Michigan Representatives in Principal Cities CONTINUOUSLY SERVING THE REFRIGERATION INDUSTRY SINCE 1919 FREON CONDENSERS AMMONIA CONDENSERS Shell and Tube type for use with Am monia, Freon or other Refrigerants. Standard or special designs to meet vary ing water temperatures available and condensing temperatures desired. EVAPORATIVE CONDENSERS All prime surface for Freon or Ammonia Refrigerants--Heavy Gage Sheet Metal Casings, especially processed for Maxi mum Resistance to Rust and Corrosion. Capacities to 100 tons. All fabricated steel parts are now hot-dip galvanized after fabrication. DRY-EX COOLERS Refrigerant in Tubes, Solution baffled through shell. For cooling water, brine. Glycols or Alcohols by direct expansion of refrigerant. HEAT INTERCHANGERS Shell and coil units for small capacities, shell and tube units for large installa tions. 16 standard models from one ton to 180 tons capacity. BLO-COLD INDUSTRIAL UNIT COOLERS Blo-Cold Models are available for either medium temperature or low-temperature applications. All fabricated steel parts are hot-dip galvanized after fabrication. COOLING TOWERS Twelve sizes of induced draft cooling towers to fit practically any application. Sturdily built, hot dipped galvanized for long life. Acme Industries, Inc. also manufacture Flooded Water and Brine Coolers, Hi-Peak Water Coolers, Pipe Coils, Flow-Cold Liquid Chillers, Oil Separators, Receivers and Fin Coils. WRITE FOR CATALOG ON ANY PRODUCT 1216 Air System Equipment Heat Transfer Surface Aerofin Corporation 410 So. Geddes Street ,Syracuse 1 N. Y. AEROFIN Standardized Light-weight Heat Exchange Surface Branch Offices Boston, Cleveland, Chicago, New York, Philadelphia, Detroit, Dallas, San Francisco and Montreal Aerofin is the modern Standardized units or for installing in ducts. May be Light-Weight Encased Fan System Heat installed either horizontally or vertically. ing and Cooling Surface originated by Fan Engineers to meet the present and future requirements of this highly specialized field. All Standard Abbofin Units are furnished as completely en cased Units, ready for pipe and duct Used on any two-pipe steam system for preheating or reheating. Modulating control on preheaters. Available in 13 lengths and 3 widths, from net face area of 2.76 Bq ft to 26.28 sq ft. 0 connections. The patented casings are built of pressed steel and are exception ally strong and rigid, protecting the Unit from all the strains of pipe connections and expansion or contraction in service. The casings are flanged on both faces, top and bottom, and template punched for bolting together adjacent Units, or for duct connection. Pig. t Aerofin Non-freeze heater (Fig. 1) is non-freeze, non-stratifying spiral fin coil built into casing for air conditioning Flexitube Aerofin (Fig. 2) is distin guished from all other developments by its off-set tubes, so arranged as to absorb all expansion and contraction strains. Headers--Steel. Tubing--% in. O.D. copper, admiralty or aluminum. Joints--Where admiralty or copper tubes are used together with bronze or steel headers tubes are brazed to headers. Where both aluminum tubes and headers are used tubing is welded to headers. Casings--Copper, aluminum or galvan ized iron. Design--Constructed with headers on opposite ends making possible installa tion of units with tubes horizontal or vertical.