Document 82pK18zgyMvn7Yvj7VZo0nkXk

PRODUCT DATA TBMtCO I2G wc ran * DESCRIPTICH TEHVCCO 225PG is s aediua molecular weight, general Surpass polyvinyl chloride resin vith uniform particle sirs* particularly' applicable to rigid pipe extrusion. TYPICAL PROPERTIES Fora sod Appearance Relative Viscosity <12 by vt. is cyclohexanone, 2SC) Inherent Viscosity (0.2 gr./lDO si. cyclohexanone, 30C-ASIH D1243) Specific Gravity ,(25C) Bulk Denaity, pounds/cu.ft. graas/eu.em. Contsnination, maximum Particle Size, X thru 40 atsh X thru 200 asah Volatiles, X maximum ' Whit* Powder 2*22 0.92 1*40 32 0.312 30 100 2 0.4 fWCnom CHARACTERISTICS TEJJNECO 22SPG produces excellent povder dry blende and is highly compleoentary to popular tin etabilissrs. Its inherent hast stability Bakes it a natural choice for rigid profiles. TYPICAL APPLICATIONS -*>; ? RigiJTvT^ip^endTrofilaa. ' -/ . HAZARDS AND SAFE KAUDUKG" Refer to OSHA Standard 1910.1017 on vinyl chloride, which requires nonitoring and other precautions In etorags, handling and use of PVC and specifies the labeling "contains vinyl chloride - vinyl chloride is a csncer-euspect agent." Adequate ventilation at work areas, particularly enclosed spaces, is required. For hot processing local exhaust, safety glasses and gloves are recommended. Hew PVC reeins with a low monomer content sake it eaeiar to operate below th OSHA action level st 0.3 ppm in a processor's work area, assuming normal conditions and ventilation, simplifying compliance vith sone of the regulatory requirements. Fur ther developments on resins ore pending. / AST>J Cell Designation: CPA-15000 11/76