Document 7YZp98kjy5QzmBnKwx5ExzY8
CryoChem Inc.
P-O, Box 32, Boyertown, Pa. 19512
TWX 510 651*4487 (CRYOCHEM BYWM
Area Code 215 689-9531
September 15, 1978
Day and Zimmermann, Inc. 1818 Market Street Philadelphia, pA 19103 Attention: Mr. T. Zuhl Gentlemen:
Reference: Your #30321 01 ________________ Our #5292
Enclosed, herewith, you will find two copies of the Data Sheet covering the Pressure Vessel supplied on the above pur chase order.
Very truly yours
CRYOCHEM, INC.
JGS/dmh Enclosures
J. G. Stasik, Jr
COLORITE 009177
* FORM U-1A MANUFACTURERS' DATA REPORT FOR PRESSURE VESSELS
(Alternate Fo.-m for Single Chamber. Completely Shop-Fabricated Vessels Only)
As Required by the Provisions of the ASME Code Rules, Section VIII, Division 1
1. Manufactured by CryoChem,__Ijtc ~i ^overtown , FA 2. Manufactured for Da5^&_Zimmerroamn/ Philadelpnia,PA
_____ ___ ____
#5292 Item DA-!C
(Hohi. or vert. tsnk) (Mtgf'i S.n.1 No I
(CRN;
(Drawing No.I
(Nat l Brd No.l
5. The chemical and physical properties of all parts meet the requirements of material specifications of the ASME BOILER
ANQfiRESSURE VESSEL CODE-Jhe.dyign, construction, and workmanship conform to ASME Rules, Section VIII. Division 1
197 !_ and Addenda to
317 I (_ . and Code Case Nos. * * *
__________ ______________ __
(Vearl
(Dale) ,, ,
Special Service per UG-120(d)
_
__
. ____ ____ ____
Manufacturers' Partial Data Reports properly identified and signed by Commissioned Inspectors have been furnished for
the following items of the report: _N.A. _ __ . ___________________ __ _______ _______ _____________________
6. Shell'.Matt. SA^-j^ELC*^ 3/16 i,,. Atow. 0 in.Diam.
21) in.Lgth. 25 _ ft____ 6 __ in
($P*c. No.. Grade)
pw
7. Seams: Long.V&Lclcd C&dX fautfc R,T. Spot
Efficiency _ .
% H.T Temp
^^weideTOK^Wt**1 Fil|,."c?;"Jit_e(3j_,, _ spot ..
"" ..F Time __________ a
hr
(Watded. OW. Snai. Lap. Bun)
8. Heads: (at Material
--
(Spec. No.. Grade)
(Spot. Pamai or full)
___ _ fbt Material SA*_3u0r_3l6ELC _ (Spec No.. Grade)
_
Location (Too Bottom Endtl <at Top (b) Bottom
Mm T(Ml 1/8 1/6
Cor Allow 0 0
Crown AaOtu*
21) 21+
KnuckJ* Radius
l3* lh
Elltpaa Comcai Ratio Ap#* Angi
---- --_ _r-
Hamttpn Radius
Flat S<6 to Praatura Dt*m (Convex or Concavat
-- _ --___ concave
_
_c6ncaye
If removable, bolts used (describe other fastenings) 6A --IS 3~B7 l'g ( 20 )
I r IMstenal. Spec No. G/. ^jre. No. I
9. Constructed for max. allowable working pressure F \jlQUQ__ psi at max temp
250
F. ftlm, temp, (when
less than -20 F| _-- --
E. Hydrostatic, pr'eerratier or-combinejton test pressure
70_____ psi.
10. Safety Valve Outlets Number 1 Site
3 Location
____________ ._______ ______
11. Nortles and Inspection Openings.
RurpOM
Oiam
OrMat. Outlet Oram) No or $<ta
Typa
Nom Ratnlorcamsnt
How
Mali Thk.
Matt.
Artachad
Locaoon
Outlet
16
flange SA-312-316 .280 IntegralweldedjTTIfiead
Inlet
2k
Inspection j 3
flange SA-312-316
237_Integral_ Weldedshell
PAD
SA-l+0-3l__l*25 _ Integral__ we~TdeB sKeli
Inlet ' Outlet
i3 13
flange SA-312-316' flange SA-312-316
.216 "Integral weTded shell .216 Integral _welded B._Head
Inspection 12 1
Inlet
1 ,3k
Inspection 2 h
flange SA-3I2-3I&____ *133 ".flange SA-312-316 Cplg. SA-I+79-316 .11+3
Integrals werded._3ij.ei1 Integral welded-shell Integral welded shell
12. Supports. Skirt Ye S (_UgS --.Legs
Other
-------------------------_----- Attached^ li\i?___ 19__8 .9 e_a d
13 Remarts- Unit Is a water stripped column for non-lethal, non-corrosive
.'_____ service.
\ ....
__ ____
....
CERTIFICATE OF COMPLIANCE
We certify that the statements made in tms report are correct and that all details of design, matehal, construction and
workmanship of (his vessel conform to the ASME Code for Pressure Vessels. Section VIII,
Date __<--^~l fa' ~T <5 Signed C"--rycoCheir;, Inc. _____ by ___
"U" Certificate of Authoriiation No
#58 itRRufactureO
_/
(Representative! / ft
_ expires Jandary 31.
^ 19 81
CERTIFICATE OF SHOP INSPECTION
Vessel made by CryoChem, Inc.
,, Boyertown, PA
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and/or the Slate or Province of PA
and employed by H^-G.E . I <5cI-.-CO-.f'ave inspected the
pressure vessel described in this Manufacturers' Data Report on __ ____ ,,__ s - t __ 19 ) X *nd state that,
to the best of my knowledge and belief, the Manufacturer has constructed this pressure vessel in accordance with
ASME Code, Section VIII. Division 1, By signing this certificate neither the Inspector nor his employer makes any warranty,
expressed or implied, concerning the pressure vessel described in the Manufacturers' Data Report Furthermore, neither
the Inspector nor his employer shall be liable in any manner lor any personal m|ury or property damage or a loss of any
kind arisjngJtbnvor connectadjfrrfh this inspection r7,'-ivr
itC'
Signed^(tnsp^epfotr)^-`-h- ' Date `
~ I "Commissions _MiN..tTBo.rC, Sui._PP_ioAv--incs sne No.l--
COLORITE 009178
*'
FORM U-1A MANUFACTURERS' DATA REPORT FOR PRESSURE VESSELS (Alternate Form for Single Chamber. Completely Shop-Fabricated Vessels Only) As Required by the Provisions of the ASME Code Rules. Section VIII, Division 1
1. Manufactured by CryoCheiTl, Inc , "Boyertown. T.7-T 2. Manufactured for D&y & ZliniTlGrTTlBTin ,__ Phi_l_a___delp_h___i_a__,___7___T_____
#5292 Item DA-1C
(Horn. or vert link) (Mfgr" Sinil No.)
(CRN
(Drawing No )
(Nkr'l Brd No)
(Year Built) 1978
5. The chemical and physical properties of all parts meet the requirements of material specifications of the ASME BOILER
^ipPRESSURE VESSEL CODp JhfUtAS'gn. construction, and workmanship conform to ASME Rules, Section VIII, Division 1 19 ( {_ and Addenda to f / jl// ( md Code Case Nos. w A
(Vnri
Special Service per UG-12Q(d)
Manufacturers' Partial Data Reports properly identified and signed by Commissioned Inspectors have been furnished for
the following items of the report: N. A .____ __________________________________________________ _
6. Shell:Metl. SA^^ELC1^ 3/l6
Corr Allow.
in, Diam. -2Ll _m. Lgth. 25_
(Spec. No. Grade)
7. Saams-InnqWttlded dbl butt RT Spot
Efficiency 85 _ % H.T. Temp,
_F Time.
WeldeTd<Mb:' Girth
(Waldsd, Dbl. Snot. Ijd, Burt)
( 3 spot R.T. (Spot. P_a_r_tiaJ(l. Ofr FFuull.l,) No. of Courses .
8. Heads: (a) Material SA-2]iO-T16ELC
(b) Material _SA*2ijO - 316ELC
(Spec. No.. Grade)
(Spec. No., Grade)
_hr
Location
Mm
(Too. Bottom nd*|
Thi.
(a) Top
1/6
(b) Bottom __ 1/d
Corr, Allow
O' 0___
Crown Radiui
2U 21i
Knuddt Radius
1^ Ih
EllipM Corneal
Hamiapfi
Ratio Apaz Aftgla Radius
-- --
--
--_____ --
Flat Diam
-- --
Sidt to Prwura (Convex or Concaval
concave' concave
If removable, bolts used (describe other fastenmgsl SA -- 193**B7 l^S (20)
sq-ofr*'^ (Maternal. Spac. No
9. Constructed for max. allowable working pressure F . V .0 psi at max. temp.
No.l
F. Rim. temp (when
less than -20 F)
______ E. Hydrostatic.premwetieror-cpmbmeton test pressure
10. Safety Valve Outlets. Number. 1 . Site . 3 ILrowc-afltfiionnn t OP tie B Cl
20 _ psi.
11. Noales and Inspection Openings:
Purpoaa
Qim
(1rUt. Outlot, Dram) No or Sit*
Typa
Moti
Nom Thk.
R*if#Moraetal mani
HOw Anocftod Location
Outlet
16
fiance SA-112-llb .280
Inlet
JL_ .flange SA-312-316 .237
Inspection 3 1
PAD ^A-2li0-3l6 1.23
inlet
i3
flange ^SAnT2-1l6 .216
Outlet
13
fl anre ..SA-V) 2-716 .216
Inspection Inlet
1? 1
i fiance SA-712-716 3T "fiance' SA-71 2-116,
.133 .113
Inspection -2--=__ CpljU SA-H79-716, _^!U3
Intecral welded T . Head .Intecral welded shell Intecral welded shell Integral welded shell Integral we]Lderi B. Head Integral we! ,dea shell Integral-- wweellddeedd B^hh^eTlTl
12. Supports: Skirt
S Lugs "" Legs
. Other**T~ --,,___________ ... Attachable Ided tO E. Head
,, (Yaior.no)
(No)
(No.).
. (Dascnbe,)
- , . (Where and howl
13 Remarks: Unit is a water stripper column for non-lethal, non-corrosive
service . _____________ _______ .,..___ __ ______ _______ ____________________
CERTIFICATE OF COMPUANCE
We certify that the statements made in this report are correct and that all details of design, material, construction and
workmanship of this vessel conform to the ASME Code for Pressure Vessels. Section VIJf,
Dete Iks i/) Signed CpyOChsm, Inc.__
hu *-/
"U" Certificate of Authorization No. #58'/l^*nu< *f>
expires Jane
81
CERTIFICATE OF SHOP INSPECTION
Vessel made by . CryoChem, Inc.at Boyertown,
PA
t. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and/or the State or Province of PA_______ --__and employed by ^
i _have inspected the
pressure vessel described in this Manufacturers' Data Report on -- ----------a ** l
19 iX-- and state that,
to the best of my knowledge and belief, the Manufacturer has constructed this pressure vessel in accordance with
ASME Code, Section VIII, Division 1. By signing this certificate neither the Inspector nor his employer makes any warranty,
expressed or implied, concerning the pressure vessel desenbed in the Manufacturers' Data Report, Furthermore, neither
the Inspector nor his employer shall be liable m any manner for any personal injury or property damage or a loss of any
kind arisingjtebrrvor connecja^jMh this inspection. (7 * g/
.^
irC '"
Signs
Date Q' f tX *I 0 Commissions -- N R M k ft l FA
j ^--
TNetTBoard. Stttt, Province ar>o'NNo )
COLOR!TE 009179