Document 7MKqzDbepkNYoeMjDJz74vjYa

FILE NAME: A M M C O (AMC) DATE: 1977 DOC#: AMC017 DOCUMENT DESCRIPTION: Product Installation Instructions M IM ICO ARBOR PLUG - INSTALLATION INSTRUCTIONS- NO. 11181 AMMCO TOOLS. INC. PREKCAW/ ARK/NORTH CHICAGO, ILLINOIS 60064 US.A. (615) 793-7533 Customer Service # : (800) 323-6852 FOR USE ON AMMCO BRAKE SHOE GRINDERS MODELS 8000, 880, and 890 This foam Arbor Plug is provided to prevent brake shoe dust build-up in the arbor and to improve the air flow through the abrasive belt guard to the dust collection system. INSTALLATION To install the Arbor Plug, simply remove the abrasive belt guard which covers the arbor and place the plug in position on top, Fig. 2. Be sure to align the opening in the arbor plug with the abrasive retaining clip. Drive the plug into the arbor carefully using a wood block and tapping with a hammer, Fig. 3, until the plug is flush with the arbor top. NOTE: The abrasive belt and the retainer clip should be left in place during the installation of the plug. Also, the arbor plug need not be removed when replacing the abrasive belts. No. 11181 Arbor Plug No. 8007 ___| Abrasive Belt Wood Block Arbor Plug No. 9892 Abrasive Bell Guard 11303-11-77 The brake shoe clamp need not be removed when Installing the arbor plug. It Is not shown in place here lo simplify (he Illustration. A M M C O TOOLS, IN C ALL RIGHTS R ESERV ED PRINTED IN U.S.A. H 0148