Document 7GDkJywyBYavN82jMoNjy03a

" *WA**w*to| 41W t I iBifcW 1VWWAU 41 W 4 WW4 HIKPTES OF THE AHUUAfl METING of the FRICTION MATERIALS STANDARDS mSTOTTS, INC. Wednesday ud Thursday Just 25 and 26, 1980 ac The Homesteed, Hot Springs, Virginia Qlfars/m MlNUIiS MEMBERS PRESENT Abex Corporation Bendix Corporation Brassbestos Manufacturing Company Delco-Morelna Division-General Motors Corp. Lear-Siegler Company Nuturn Corporation P. T. Brake Lining Company H. K. Porter Company Raybestos-Monhatton, Inc. Reddaway Manufacturing Company Thiokol Chemical Corporation S. K. Wellman Corporation Wheeling Brake Block Company REPRESENTATIVES Robert E. Nelson Francis E. Messier, Vice President William Simon Fred Tost (Proxy D. L. Emrlck) Robert Anderson Joseph W. Greenen Stuart Camins W. Max Sleath David E. Cunningham John M. Moore John P. Gallagher Gordon A. Corrigan, President Lee Burgess OTHERS PRESENT Bendix Corporation Delco-Moralne Division (Retired) Frenos-Venezolanos (Regional Member) H. Krasne Manufacturing Company Leer Slegler Company iluturn Corporation P. T. Brake Lining Company H. K. Porter Company Reddaway Manufacturing Company Wheeling Broke Block Company Asbestos Information Association Legal Counsel Friction Materials Standards Institute, Inc. James W. Armstrong Thomas Hernon Ross E. Kettering Georg Moser William Osborn Robert Mlghton James L. Mellow Steve Doyle Ben Kublln George J. Bohrar F. William Barton Burgess L. Burgess George Stratton Bob J. Plgg (Guest) Robert P. Gorman, Esquire Edward W. Drlslane, Secretary ilr. Corrigan, President, called the meeting to order at 1:35 P.M. MIHDTES OF MEETINGS OF JUNE 13-14, 1979 The minutes of the Membership Meetings held June 13-14, 1979 had been dis tributed. No corrections were suggested. MAR 000198 Minute* of the Annuel Meeting -4- June 25-26, 1980 They voted to discontinue publication of the ESP Hunters In Institute catalogs. The Directors considered the need for Informing Members on original equipnent use of metallic linings--with the seal-nets new used an disc brakes-- ;*'* and resolved that the Institute would Inform the Meatership on usage by ,<&* yjv bulletins, but would not list this Information In Its catalogs. It would be up to the individual manufacturer to decide on coverage and distribution^' of application Information to the field. The Board of Directors approved x * the Data Book and Technical Committee report. The Directors reviewed the report of the Health and Environmental Affairs Committee (formerly the Asbestos Study Committee). The Chairman reported that the EPA is aiming for a ban on asbestos In disc brake linings by 1985, and that the hazardous waste disposal regulatlona Issued under the Resource Conservation and Recovery Act (RCRA) will be effective on Ifovesfcer 19, 1980. The Directors directed that the Institute Office and Committee Improve Information flow to Delegates and Alternates. The Board approved the report of the Health and Environmental Affairs Committee. The Board reviewed the report of the Brake Performance Study Committee and approved that report. While the Directors received the report on the Annual Meeting, they decided to return In 1981 to the Homestead, Hot Springs, Virginia. With that major exception, they accepted the report of the Annuel Meeting Committee. The Board of Directors voted to terminate the Defined Benefit Pension Plan for Institute Employees, and replace It with contributions to a Simplified ** Employee Pension Plan (SEP) using Individual Retirement fTRA). f The Board voted to spr^sv* negotiations by the Secretary with the landlord on the lease of Office Space at the Bergen Mall Office Center. The Board approved a plan for Indemnification of Officers and Directors for action taken In their capacity as Officers and Directors, and recommended Its submission to the Membership In the form of an amendment to the Institute's By-laws. Upon motion duly made, seconded and unanimously passed. It was: RES01VED: To accept the report on Board of Directors activities as read. HEALTH ARP SlVIROMHEBIAl AFFAIRS COMMITTEE Mr. James Armstrong, Chairman of the Health and Environmental Affairs Committee read this report. Refer to EXHIBIT 9. The Chairman summarized activities by Federal regulatory agencies such as EPA In Toxic Substances Control and'Hazardous Waste Management, OSHA with Its workplace standards and the NIOSH reconsendations, the status of leg islative activity relative to an asbestos hazards compensation act, and general Institute activities and replies and contacts with the EPA. He Indicated that EPA was apparently aiming at a ban on asbestos In disc brake linings by 1985. In discussing the hazardous waste disposal regulations chat were published In the Federal Register on May 19, 1980, with effective date of November 19, 1980, questions were asked relative t0 the exemption for generators of less than 1,000 kllogran (2,200 pounds) per month of hazardous waste. There Is e -question ea to whether the identification of MAR 000199 asbestos u a hazardous waste In the Hay 19 y notice Included frletloa materials waste which is only part asbdcoa. is discussing this lass than 2,200 pound exemption It was Indicated chat the small rebullder will ba exempted, but that if friction materials waste (used linings, drillings, anc other dust) Is considered a hazardous waste and goes over the 2,200 pound exemption level at larger rebullders, they would be required to complete manifests and other compliance reports required by the regulations. i VX'* V As regards the OSHA requirements In the work place, where the exposure limit for the 8 hour TWA is now 2 fibers per cc, this could go to 0.1, 0.2, 0.5, or 1.0 fibers par cc. There Is little question but that OSHA will propose lowering the present 2 fiber per cc exposure limit. Any OSHA requirements will be in the exposure limits as well as In peripheral requirements such as medical exams, notification of workers, records and the Ilka. If a ban were proposed, lc would come from EPA, under the Toxic Substances Control Act (TSCA). Questions were asked concerning lead times if EPA proposed a ban. The Chairman suggested that If SPA were to attempt banning asbestos In commercial products, they might do this either of two.wayss (1) Ban a product by product line--such as all disc brake linings; (2) Call for a reduction In asbestos use across the product line--such as from 50Z to 30Z. While EPA claims that the technology exists for banning the.uae of asbestos in disc brake linings, they may target 1982 for a ban, but it would more likely be 1984-85. Questions arose on the possibly lower OSHA exposure limits. If the levels were reduced to 0.5 or 0.1 fibers per cc, how could these levels be measured? One approach would be to study the error that exists In the current optical microscopy techniques, and attempt to reduce these errors. The other approach could be the move to electron microscopy, which had been tried by the Department of Labor In California--this Is expensive equipment and the will be considerably more expensive than-with the optical methods. At this li&tac^a Member stated that his Plant had been cited for asbestos pollution by theEPAf--.In, response to a question, he Indicated that he was In EPA's Chicago Region that he faces could amount to $25,000 a day since the date of alleged no5*ecqpllance. He Indicated that at the alleged area of non-compliance that onecbwjd0* find a "thimble-full" of asbestos dust. Another Member Indicated that'bqmpllance Is difficult. The only way one can prove compliance is by special mbnitoring, soil boring, and the like. The EPA monitors with a "blade box," anA one must refute Wcpi1. allegations technically. * The Member Indicated that he would be In court with the EPA on June 30, 1980, and that if the EPA were to be sustained, he could be shut down. The EPA can make allegations of asbestos pollution of the environment from soil counts, or from tests showing leaching of asbestos into streams. Another Member indicated that they had refuted suds allegations by making analytes of water upstrsea from the factory. It waa suggested that a manufacturer's insurance carrier may have technical expertise to help in such cases, or at minimum ba' able to recommend outside consultants who would have this . ' expertise. Upon motion duly made, seconded and unanimously passed, it was: RESOLVED: To accept the report of the Health and Environment Affairs Committee as written.. MAR 000200 Minutes of the Annuel Meeting -6- June 25-26, 1980 MR. 301 PIGG. ASBESTOS INFORMATION ASSOCIATION - GUEST SPEAKER ---------------------- ------------------------------------------------------------------------------------------- Hr. Gordon Carrlgm, President, Introduced Mr. Bob PISS* the Institute s V Guest Speaker for this Meeting* Mr. Pigg hes served es Executive Director of the Asbestos Information Association, N.A. since September 1978, having earlier served aa Administrative Assistant at the Association since 1974. Mr. Pigg's renarks vers prepared for this Meeting, and were a fresh update on what has happened, what is currently in the works, and what he forsees for the future. (A copy of Mr. Pigg's talk to the Membership was subse quently distributed to the Membership). He discussed the last ten years of regulation, with particular emphasis on those Agencies impacting the friction materials industry--OSHA and EPA. Noted were OSHA's recent rule on access to exposure and medical records, a new asbestos alert campaign, and the OSHA plans for revision of the workplace standards. Ur. Pigg stated chat an advance notice of proposed rulemaking will probably be Issued this Summer, vith a final rule scheduled for later in 1981. It will undoubtedly call for a lower exposure limit than the current 2 fibers per cc. In reviewing EPA activity, he noted that asbestos was the first substance to be regulated under the Toxic Substances Control Act (TSCA), and that this statute had more teeth than any other statute regulating industry. It waa noted that EPA is considering several control options, hut that his informa tion indicated that EPA may avoid regulating individual products, and may likely restrlce the quantity of asbestos which may be mined or imported. In Ur. Pigg's review of the regulations to be effective November 19, 1980, under the Resource Conservation and Recovery Act (RGRA), he particularly commented on the definitions of hazardous waste. He noted that asbestos was not listed as a hazardous waste in the proposal of December 1978, but that it was listed in the regulations published on May 19, 1980. ?Ir. Pigg indicated that the substances listed as toxic wastes are "commercial chemical products or manufacturing intermediates." He stated that the Office of Solid Waste- (OSW) interprets this to include asbestos only as a "pure" material, and that this would not Include manufacturing process waste that contains asbestos. Mr. Pigg mentioned other actions now under study or planned by either the Congress or various State legislatures. These Included such areas as compensation, aabestoa in the schools, labelling and the like. And Mr. Pigg noted the on-going response that his Association has made to Federal and Stata lnlrlatlvas in the asbeatoa area. Mr. Pigg was questioned on Che interpretation that only "pure" asbestos would be considered * hazardous waste in line with the regulations issued on May 19, 1980. Mr. Pigg cited statements by officials of the Office of Solid Waste (OSW), and in particular the "Comment" in Federal Register notice of May 19, 1980. Page 33,124, Pnutgj.uph 261.33. The wording reads: The phrase "commercial chemical product or manufacturing chemical intermediate having the generic name listed in.." refers to a chemical substance which is manufactured or formulated for conaaercial or manufacturing use. It does not refer to e material, such as!aUflUIAcfu^IHg process waste, that contains substan^ listed in.." .--VOAV MAR 000201 Za the discussion that followed Mr. Pigs'* talk, he noted th*C the Asbestos Information Aasodatlon would be holding their Annual Industry-Government Conference again thl* September, and that Institute Members would be lavited. Mr. Pigg advised that the Hart Bill on Asbestos Compensation was Introduced oo June 18, 1980. This pertains to the sharing of the liability for asbestos related disabilities by tbs "responsible parties." This has Just been Introduced, and It Is felt that It has little chanee of being enacted In its. current form during this session. . \* j \v One Member mentioned that in sots* mining applications where asbestos friction materials had been replaced with metallic materials, there was a reaction against the metallic* because of sparks and attendant explosion danger. On another subject, one Member stated that bis Company was now labelling all friction products with the ssbestos warning label whether additional machin ing or handling was likely or not. Za response to a question, the Secretary advised that be would have copies of Hr. Pigg's comments out to the Member ship "soon." (The copies were sent to the Membership on June 30, 1980). Upon motion duly made, seconded and unanimously passed. It was: RESOLVED: To thank Mr. Plgg for his detailed and interesting summary on the current status and future prospects of legislative and regulatory actions affecting the asbestos industry. TREASURER'S REPORT Mr. William Messier, Treasurer, prepared this report. Refer to DTOBIT 3. The Secretary read Mr. :iessier:s report. Mr. Messier's report, based on a trial- balance of April 30, 1980, projected substantial excess of income over expenses for the full fiscal year. The projection was for an excess of $17,000 of lnctxae over expenses. Bis report analyzed variances, with the most significant difference being the decrease in Pension Expense resulting from pension payments being made from a separate Trust rather than from the Corporation. To accomplish this change, $55,000 was transferred on January 1, 1980 to an InrflTiAddaeoebt tt:rust for Miss Duschek's pension. RUpon motion duly made, seconded and unanimously passed, it was RESOLVED: To accept the Treasurer's Report as written. BUDGET COMMITTEE REPORT Mr. Brands E. Messier, Chairman of the Budget Cottmittee, presented this report. Please refer to EXHIBIT 5. Mr. Messier's report presented an Expense Budget for 1980-81 of $95,470, a slight reduction in budgeted expenses under that for 1979-80. This was due to the fact chat oenslon payments to Miss Duschek would be paid froa MAR 000202 Minutes of the Annual Meeting -14- Jttnei25-26 1960 INDEHWIFICATION OF OFFICERS AND DIRECTORS V w II " *4 Legal Counsel advised that at tbs Board of Directors meeting a&Jmam 24, 1980',*' the Board had approved his recommendation for indemnification of Officers and Directors, for losses suffered by them because of acts done In their capacities as Officers and Directors. The actions must have been made In good faith. As such indemnification can be adopted by a change in the By-Laws, It must be submitted to the Membership for balloting. It Is not felt that there is sufficient pre-notification to the Members to ballot at this Meeting, so the indemnification plan will be submitted to the Membership by mall ballot. OTHER BUSINESS Questions were raised about non-member manufacturers of friction materials. One mentioned was Canparts, in Cambridge, Ontario, Canada. The Secretary was advised that they were now in production of friction materials, in particular disc brake pads. A Member shewed a listing where FMSI Numbers were used by Canparts. The Secretary was advised to contact Canparts concerning Membership. Another Member questioned Virginia friction Products of Tappahannock, Virginia. The Secretary stated that he has written several times to Mr. Bill Carreras of Virginia Friction Products and to Mr. Jor Goodreau of Uidco, who purchases materials from Mr. Carreras. He has had no reply. Also, the Secretary Indicated that he had no catalogs, listings or other Information on Virginia Friction Products showing that they were using the Institute's copyrights or trademarks. The members were asked that If anyone has literature showing Virginia Friction Products use of the Institute's copyrights or trademarks that they send such information to the Office. t Questions were asked as to what constituted infringement of the Institute's copyrights and trademarks. This subject was addressed by the Institute's copyright attorneys, Shenler & O'Connor, In 1975. Mr. Gorman had not received a copy of this report from Shenler & O'Connor, and the Secretary will send on a copy. Use of the Institute's catalogs, bulletins, or sheets therefrom is an obvious Infringement. Dae of the Institute's FMSI and PMS Is a violation of the trademarks. Condensation is an infringement. The listing showed for Canparts is obvious infrlngment. There being no ocher business brought to the attention of the Membership, upon motion duly made, seconded and unanimously passed. It was: RESOLVED: To adjourn Adjourned at 9:50 A.M. E. W. Drislsne Secretary MAR 000203