Document 79MkJZ5m6rv6QYjy4NM1jgNe
July 30, 1963 > supersedes Formula TFX-9 Dated March 27, 1963
ACM", THXA3 "LFTT FO'Mir.A
PITH DAY WALRRQARD JO TUT COMPOUND TEX-992
DESCRIPTION OF PRODUCT
- For uso in all applications in the rein forcing and concealing of joints, except the final finish.
FORMULA
Raw Materials
Source
&Sodiu?n Citrate
Open Market
Methocel MCa 4000 cp.< Dow Chemical Co.
DiBntyl Phthalate
Monsanto Chen. Co.
Gelvatol 20-30 BP Oelva D-702
Shav/inigon Resins Co,
If If ff
Clay CM
J. M. Huber Co.
Asbestos 7^-9
Phillin Carey Co.
Tex-36
PetrO-Ad Yellow Oxide #208?
Bestwnll Gypsum, Acme
The Thornley Co. C. K0 Williams Co
-"-Vary to adjust setting tine.
R.M.Sprc. % 37525 o.4o
o.5o i.5o 3.oo 3.00 9 li. 5o
86*67$ 0.100 0,,200
-. t 0, oft
'forking Consistency - Refer to Plant Testing "Procedure No. 32,,
Snecification
--Max2im--u--m--
Minimum -------
Average 66
Setting 21 w<9
Refer to Plant Testing Procedure No. 6 (slov; set).
Specification
Maximum
Mini mam
Average
TUrsT," 45 min. ~~P-"tirsT, 45 nin.
Morning ~>vonertles Specification
- Refer to Plant Testing Procedure Mo. 33.
- Must he plastic and buttery working; free of grit or coarse particles.
Bonding Properties - Refer to Plant Testing Procedure No. 35
| I
Specification
- After compound has dried, tape shall delaminate when peeled back.
Crack Resistance - Refer to Plant Testing Procedure No. 37.
Specification
- There shall be no large fissure cracks in the wedge arid very few, if any, crocks In the thinner half of the wedge.
o/ Denotes change0
WM
PLAINTIFF'S EXHIBIT
SGP 0018373
September 17, 1969 NEW FORMULA
ACME. TEXAS PLANT FORMULA
ONE DAY WALLBOARD JOINT COMPOUND (WHITE) NO. TEX-992 (speed-set)
DESCRIPTION OF PRODUCT
- For reinforcing and concealing joints and nailheads. To be supplied on request only.
FORMULA Raw Material
Sodium Citrate* Natrosol 250HXR Gelvatol RS6219 Clay K-70 Asbestos 7RF-9 Petro AD TEX-38
Function
R,,M. Spec.
Retarder Thickner Adhesive Filler Fiber Filler Wetting Agent Filler
134 170 162 167
9 143
-
Percent
0.1 0.50 3.50 3.00 4.00 0.10 88.80 100.00
Lbs./Batch
2 10 70 60 80
2 1776 2000
lbs.
11 11 II II t! 11 II
b& 3 // 2ei~
'* i ^ 3 o* 1/ `2
7 So"
* (vary to adjust- setting time)
WORKING CONSISTENCY Specification:
Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
64 56
60
SETTING TIME Specification: .
Refer to Plant Testing Procedure No
Maximum
Minimum
i Zo 105-min.
9O 75 min.
6 (slow set) Average
90 min.
WORKING PROPERTIES Specification:
BONDING PROPERTIES Specification:
%
CRACK RESISTANCE Specification:
Refer to Plant Testing Procedure No. 33. Should have good working properties and be free of any grit or extraneous material.
Refer to Plant Testing Procedure No. 35. After the compound has dried, the tape shall delaminate when peeled back.
Refer to Plant Testing Procedure No. 37. There shall be no large cracks in the wedge.
EDO:dek
SGP 0018374
January 29, 1970 Supersedes Formula TEX-992 Dated 9/17/69
ACME, TEXAS PLANT FORMULA
ONE DAY WALLBOARD JOINT COMPOUND (WHITE) NO. TEX-992 (Speed-Set)
DESCRIPTION OF PRODUCT
- For reinforcing and concealing joints and nailheads. To be supplied on request only.
-/ FORMULA Raw Material
Function
R-M. Sp ec.
Percent
Lbs/Batch
Sodium Citrate* Natrosol 250 HXR
Gelvatol RS 6219 Gelva Asbestos Defoamer Mill TEX-38
Retarder Thickner Adhesive Adhesive Fiber Filler Defoamer Filler
* Vary to adjust-setting time.
134 170 162 161
9 196
-
0.1 0.2 3.0 1.0 3.5 0.1 92.1 100.0
2 4 60 20 70 2 1842 2000
/2 <>
/is r 2 22 `-a -- 7 is e
26 lb 4 *z 12 c z.
(30 i.3 j2 c
7o /a
WORKING CONSISTENCY Specifications:
- Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
62 54 58
SETTING TIME Specifications:
- Refer to Plant Testing Procedure No. 6 (slow set)
Maximum
Minimum
Average
105 min.
75 min
90 min.
WORKING PROPERTIES Specifications:
BONDING PROPERTIES Specifications:
CRACK RESISTANCE Specifications
Refer to Plant Testing Procedure No.33. Should have good working properties and be free of any grit or extraneous material.
Refer to Plant Testing Procedure No. 35. After tne compound has dried, the tape shall delaminate when peeled back.
Refer to Plant Testing Procedure No. 37. There shall be no large cracks in the wedge.
EDO:dek
'
-/ Denotes change in this reissue.
SGP 0018375
September 8, 1971 NEW FORMULA TEX-992
ACME, TEXAS PLANT FORMULA SPEED SET JOINT COMPOUND WHITE TEX-992
(1 hour working cement)
DESCRIPTION OF PRODUCT: - For use in reinforcing and conceiling joints and nailheads.
FORMULA: Raw Material
Function
R.M. Spec. Percent Lbs/Ba tch
*Sodium Citrate Natrosol 250 HXR Gelvatol RS-6278C Gelva GP702 Asbestos SG210 Asbestos 7RF09 Mica p80H Defoamer MllT? Vanicide Denscal
Retarder Thickner Adhesive Adhesive Fiber Filler Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Fungicide Plaster
134
0.10
0.750
170
0.25
1.875
162
2.00
15.000
167
0.50
3.750
-
1.50
11.250
9
3.25
24.375
11
5.00
37.500
196 .10 .750
126 .10 .750 yZZOS6T05 ' .645.375 651. oo
100.00 750.000
*Adjust quantity according to set time requirements.
WORKING CONSISTENCY: Specifications
Refer to Plant Testing Procedure No. 32.
Maximum
Minimum
Average
62 58 60
SETTING TIME: Specifications
Refer to Plant Testing Procedure No. 6 (slow set)
110 min.
70 min.
90 min.
WORKING PROPERTIES Specifications
Refer to Plant Testing Procedure No. 33. Must be plastic and buttery working; free of grit or coarse particles.
BONDING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape shall delaminate when peeled back.
CRACK RESISTANCE: Specifications
- Refer to Plant Testin g Procedure No. 37. There shall be no large1 fissure cracks in the wedge and very few, if'any, cracks in the thinner half of the wedge.
EDO:dek
SGP 0018376
January 28, 1972 Supersedes TEX-992
Dated 9/8/71
ACME, TEXAS PLANT FORMULA SPEED SET JOINT COMPOUND WHITE TEX-992
(1 hour working cement)
DESCRIPTION OF PRODUCT: - For use in reinforcing and conceiling joints and nailheads.
FORMULA: Raw Material
Func tion
R.M, Spec. Percent Lbs/Ba tch
*Sodium Citrate Natrosol 250 HXR Gelvatol RS-6278C Gelva GP702 Asbestos SG210 Asbestos 7RF09 Mica p80H Defoamer Mill Vanicide Denscal
Retarder Thickner Adhesive Adhesive Fiber Filler Fiber Filler Anti-Cracking Agent Anti-Foaming Agent Fungicide Plaster
134 170 162 167
-
9 11 196 126
0.10 0.25 1.50
0.50 1.75 5.00 5.00
.10 .10 85.70 100.00
0.750
1.875
'-rt
11.250 // U 4
3.750 :
/C'l C'y
13.125 / .5
-<?<;
37.500 : a- r,:
37.500 5/ ^
.750
f
.750
/
:
642.750
750.000
*Adjust quantity according to set time requirements,
WORKING CONSISTENCY: Spec ifica tions
Refer to Plant Testing Procedure No, 32.
Maximum
Minimum
Average
62 58 60
SETTING TIME: Specifications
Refer to Plant Testing Procedure No. 6 (slow set)
110 min.
70 min.
90 min.
WORKING PROPERTIES Specifications
Refer to Plant Testing Pro edurq No. 33. Must be plastic and buttery working; free of grit or coarse particles.
BONDING PROPERTIES: Specifications
Refer to Plant Testing Procedure No. 35. After compound has dried, tape gbflll delaminate when peeled back.
CRACK RESISTANCE: Specifications
Refer to Plant Testin g Procedure No. 37. There shall be no large fissure cracks in the wedge and very few, if any, craoks in the thinner half of the wedge.
-/ denotes change ED0:elz
SGP 0018377
SGP 0018372