Document 6wgera3LNvYVBGgVZ7GobZr7E
FRONT AXLE
Figure 54 Remove snap ring.
Figure 57
100'-57
Remove outer lock nut, lock ring, and wheel bearing adjusting nut.
Figure 55 Remove six flange nuts and lockwashers.
Figure 58
Remove drum assembly. Outer wheel bearing will slide out as drum is removed.
Figure 56
Remove drive flange and gasket. Discard gas ket. To free flange from hub, tap lightly with a rawhide hammer. Replace new gasket at time of assembly.
NOTE
If it is necessary to replace brake compon ents such as drum, shoes, backing plate, etc., refer to Vehicle Service Manual.
18